linux/arch/arm/mach-omap2
Andrew Murray 8c4bc91063 ARM: OMAP: clock: Remove unused mpurate cmdline option
The 'mpurate' option, historically used for specifying an initial
MPU rate at boot, no longer has any effect due to the supporting
code being removed as it was 'wrong and dangerous' [1].

This patch removes the remaining dead code associated with the
__setup macros to avoid confusion and reduce bloat.

[1] https://patchwork.kernel.org/patch/5954631/

Signed-off-by: Andrew Murray <amurray@embedded-bits.co.uk>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-24 07:20:02 -08:00
..
include/mach ARM: omap2: restore OMAP4 barrier behaviour 2015-07-25 15:28:16 +01:00
am33xx-restart.c ARM: OMAP2+: PRM: provide generic API for system reset 2014-10-27 08:39:26 -07:00
am33xx.h
board-generic.c ARM: SoC platform updates for v4.10 2016-12-15 15:39:02 -08:00
board-n8x0.c ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module 2016-08-26 08:42:35 -07:00
clkt2xxx_dpll.c
clkt2xxx_dpllcore.c
clkt2xxx_virt_prcm_set.c ARM: omap2: use clkdev_create() 2015-05-06 11:58:58 +01:00
clock2xxx.h ARM: OMAP2: clock: remove unused apll code 2015-01-07 10:54:40 -08:00
clock3xxx.h
clock.c ARM: OMAP: clock: Remove unused mpurate cmdline option 2017-01-24 07:20:02 -08:00
clock.h ARM: OMAP: clock: Remove unused mpurate cmdline option 2017-01-24 07:20:02 -08:00
clockdomain.c ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIs 2016-07-04 07:15:38 -07:00
clockdomain.h ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIs 2016-07-04 07:15:38 -07:00
clockdomains2xxx_3xxx_data.c
clockdomains3xxx_data.c
clockdomains7xx_data.c ARM: OMAP: DRA7xx: Make L4SEC clock domain SWSUP only 2016-11-09 15:35:46 -07:00
clockdomains33xx_data.c
clockdomains43xx_data.c
clockdomains44xx_data.c
clockdomains54xx_data.c
clockdomains81xx_data.c ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx 2015-12-22 16:23:08 -08:00
clockdomains2420_data.c
clockdomains2430_data.c
cm1_7xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm1_44xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm1_54xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2_7xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2_44xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2_54xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2xxx_3xxx.h
cm2xxx.c ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm2xxx.h ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm3xxx.c ARM: OMAP2+: Fix typo in cm3xxx.c 2016-06-10 04:14:37 -07:00
cm3xxx.h ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm33xx.c ARM: OMAP4+: CM: Remove redundant checks for clkctrl_offs of zero 2016-07-22 23:10:57 -07:00
cm33xx.h ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm44xx.h ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm81xx.h ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx 2015-12-22 16:23:08 -08:00
cm_common.c ARM: OMAP2+: clock: add low-level support for regmap 2015-03-31 21:26:55 +03:00
cm-regbits-7xx.h
cm-regbits-24xx.h ARM: OMAP2: convert sys_ck and osc_ck to standard clock types 2014-07-02 14:26:06 +03:00
cm-regbits-33xx.h
cm-regbits-34xx.h ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver 2014-07-06 15:51:23 -06:00
cm-regbits-44xx.h
cm-regbits-54xx.h
cm.h ARM: OMAP2+: CM: determine CM base address from device tree 2015-03-27 10:55:57 +02:00
cminst44xx.c ARM: OMAP4+: CM: Remove redundant checks for clkctrl_offs of zero 2016-07-22 23:10:57 -07:00
common-board-devices.h ARM: OMAP2+: Drop legacy ads7846 init 2016-11-10 15:46:13 -07:00
common.c Revert "ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688" 2015-07-25 15:28:14 +01:00
common.h ARM: SoC platform updates for v4.10 2016-12-15 15:39:02 -08:00
control.c ARM: OMAP2+: Fix out of range register access with syscon_config.max_register 2016-02-22 09:22:38 -08:00
control.h ARM: OMAP3: Add support for configuring MMC pins as GPIO pins 2015-05-20 09:23:43 -07:00
cpuidle34xx.c ARM: OMAP3: Add cpuidle parameters table for omap3430 2016-02-19 10:35:39 -08:00
cpuidle44xx.c ARM: OMAP5: Add basic cpuidle MPU CSWR support 2016-11-07 16:52:14 -07:00
ctrl_module_wkup_44xx.h
devices.c ARM: OMAP2+: Remove legacy hwmod mux code 2016-11-10 12:42:38 -07:00
display.c ARM: OMAP2+: Make the omapdss_find_dss_of_node() function static 2017-01-05 08:58:37 -08:00
display.h ARM: OMAP2+: Make the omapdss_find_dss_of_node() function static 2017-01-05 08:58:37 -08:00
dma.c ARM: OMAP2+: DMA: Provide dma_slave_map to omap-dma for legacy boot 2016-02-22 10:00:50 -08:00
drm.c ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module 2016-08-26 08:42:35 -07:00
fb.c ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module 2016-08-26 08:42:35 -07:00
gpio.c
gpmc-nand.c mtd: nand: omap: Clean up device tree support 2016-04-15 11:53:36 +03:00
gpmc-onenand.c ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption 2016-02-22 09:24:10 -08:00
gpmc.h ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
hdq1w.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
hdq1w.h
hsmmc.c ARM: OMAP2+: Remove legacy mux code 2016-11-10 12:42:49 -07:00
hsmmc.h ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module 2016-08-26 08:42:35 -07:00
i2c.c ARM: OMAP2+: Remove legacy i2c.c platform init code 2016-11-10 08:53:30 -07:00
i2c.h
id.c ARM: OMAP3: Fix formatting of features printed 2016-11-07 14:52:39 -07:00
id.h
io.c Legacy platform_data removal for omaps for v4.10 merge window. 2016-11-18 16:49:23 -08:00
iomap.h ARM: DRA7: Provide proper IO map table 2015-07-16 00:06:05 -07:00
Kconfig ARM: AM43XX: Select OMAP_INTERCONNECT in Kconfig 2016-11-07 16:20:04 -07:00
l3_2xxx.h
l3_3xxx.h
l4_2xxx.h
l4_3xxx.h
Makefile Legacy platform_data removal for omaps for v4.10 merge window. 2016-11-18 16:49:23 -08:00
mcbsp.c ARM: OMAP2+: McBSP: Remove the old iclk allow/deny idle code 2016-06-10 05:07:25 -07:00
mmc.h ARM: OMAP2: MMC: include mmc-omap platform header directly 2014-11-26 14:30:53 +01:00
msdi.c ARM: OMAP2+: Remove legacy mux code 2016-11-10 12:42:49 -07:00
omap2-restart.c ARM: OMAP2+: Change core_initcall levels to postcore_initcall 2015-12-03 11:38:09 -08:00
omap3-restart.c ARM: OMAP2+: sparse: add missing function declarations 2015-07-15 23:43:41 -06:00
omap4-common.c ARM: OMAP4+: Initialize SAR RAM base early for proper CPU1 reset for kexec 2016-06-22 22:55:47 -07:00
omap4-restart.c ARM: OMAP2+: sparse: add missing function declarations 2015-07-15 23:43:41 -06:00
omap4-sar-layout.h ARM: OMAP5: Fix mpuss_early_init 2016-11-07 16:51:58 -07:00
omap24xx.h
omap34xx.h [media] omap3isp: Replace many MMIO regions by two 2015-04-02 16:45:07 -03:00
omap44xx.h
omap54xx.h ARM: DRA7: Provide proper IO map table 2015-07-16 00:06:05 -07:00
omap_device.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2016-08-03 07:26:11 -04:00
omap_device.h
omap_hwmod_2xxx_3xxx_interconnect_data.c ARM: OMAP2+: Remove legacy data from hwmod for omap3 2016-11-10 14:03:19 -07:00
omap_hwmod_2xxx_3xxx_ipblock_data.c ARM: OMAP2+: Remove legacy data from hwmod for omap3 2016-11-10 14:03:19 -07:00
omap_hwmod_2xxx_interconnect_data.c ARM: OMAP2+: Remove legacy data from hwmod for omap3 2016-11-10 14:03:19 -07:00
omap_hwmod_2xxx_ipblock_data.c ARM: OMAP2+: Remove legacy data from hwmod for omap3 2016-11-10 14:03:19 -07:00
omap_hwmod_3xxx_data.c ARM: OMAP2+: Remove legacy data from hwmod for omap3 2016-11-10 14:03:19 -07:00
omap_hwmod_7xx_data.c ARM: DRA7: hwmod: Do not register RTC on DRA71 2016-11-09 15:59:18 -07:00
omap_hwmod_33xx_43xx_common_data.h ARM: AMx3xx: hwmod: Add data for RNG 2016-11-09 15:39:41 -07:00
omap_hwmod_33xx_43xx_interconnect_data.c ARM: AMx3xx: hwmod: Add data for RNG 2016-11-09 15:39:41 -07:00
omap_hwmod_33xx_43xx_ipblock_data.c ARM: AMx3xx: hwmod: Add data for RNG 2016-11-09 15:39:41 -07:00
omap_hwmod_33xx_data.c ARM: AMx3xx: hwmod: Add data for RNG 2016-11-09 15:39:41 -07:00
omap_hwmod_43xx_data.c ARM: AMx3xx: hwmod: Add data for RNG 2016-11-09 15:39:41 -07:00
omap_hwmod_44xx_data.c ARM: omap4: hwmod: Remove elm address space from hwmod data 2015-11-30 13:18:37 -08:00
omap_hwmod_54xx_data.c ARM: OMAP: Remove duplicated operand in OR operation 2015-10-20 01:29:40 -06:00
omap_hwmod_81xx_data.c ARM: OMAP: make ti81xx_rtc_hwmod static 2016-06-22 03:05:18 -07:00
omap_hwmod_2420_data.c ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs 2014-07-15 05:08:56 -07:00
omap_hwmod_2430_data.c ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver 2014-11-26 14:30:53 +01:00
omap_hwmod_common_data.c
omap_hwmod_common_data.h ARM: OMAP2+: Remove legacy data from hwmod for omap3 2016-11-10 14:03:19 -07:00
omap_hwmod_common_ipblock_data.c ARM: AM43xx: hwmod: add DSS hwmod data 2014-07-05 17:44:57 -06:00
omap_hwmod_reset.c ARM: OMAP2+: hwmod: RTC: Add lock and unlock functions 2016-04-10 13:20:10 -06:00
omap_hwmod.c ARM: OMAP2+: omap_hwmod: Add support for earlycon 2017-01-20 10:39:10 -08:00
omap_hwmod.h ARM: OMAP4+: hwmod: Add hwmod flag for HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET 2016-07-22 23:08:58 -07:00
omap_opp_data.h
omap_phy_internal.c ARM: OMAP2+: Remove unused ti81xx platform init code 2015-01-14 17:21:00 -08:00
omap_twl.c
omap-headsmp.S ARM: OMAP2+: Fix build if CONFIG_SMP is not set 2016-06-27 23:30:02 -07:00
omap-hotplug.c ARM: OMAP4+: Allow kexec on SMP variants 2016-06-22 22:57:02 -07:00
omap-mpuss-lowpower.c ARM: OMAP4+: Fix bad fallthrough for cpuidle 2016-11-07 16:52:05 -07:00
omap-pm-noop.c ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
omap-pm.h ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
omap-secure.c
omap-secure.h ARM: OMAP5 / DRA7: Introduce workaround for 801819 2016-05-12 10:14:54 -07:00
omap-smc.S
omap-smp.c ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIs 2016-07-04 07:15:38 -07:00
omap-wakeupgen.c ARM/OMAP/wakeupgen: Convert to hotplug state machine 2016-09-19 21:44:26 +02:00
omap-wakeupgen.h ARM: omap: convert wakeupgen to stacked domains 2015-03-15 00:56:13 +00:00
opp2xxx.h
opp3xxx_data.c
opp4xxx_data.c
opp2420_data.c
opp2430_data.c ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
opp.c
pdata-quirks.c ARM: OMAP2+: Drop legacy ads7846 init 2016-11-10 15:46:13 -07:00
pm24xx.c ARM: OMAP2+: Include clk.h 2015-07-20 10:52:36 -07:00
pm34xx.c ARM: OMAP3: Fix external abort on 36xx waking from off mode idle 2016-04-14 08:27:30 -07:00
pm44xx.c ARM: OMAP5: Add basic cpuidle MPU CSWR support 2016-11-07 16:52:14 -07:00
pm-debug.c ARM: OMAP2+: pm-debug: Use seq_putc() in two functions 2016-11-09 15:33:33 -07:00
pm.c ARM: OMAP2+: Remove legacy PM init 2016-11-10 09:01:33 -07:00
pm.h ARM: OMAP4+: PM: erratum is used by OMAP5 and DRA7 as well 2015-09-14 12:14:47 -07:00
pmu.c ARM: OMAP2+: Remove calls to deprecacted marco,PTR_RET in the files,fb.c and pmu.c 2015-05-20 10:43:37 -07:00
powerdomain-common.c ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files 2014-05-15 22:35:10 -06:00
powerdomain.c ARM: SoC platform updates for v4.8 2016-08-01 18:27:08 -04:00
powerdomain.h ARM: OMAP2+: powerdomain.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
powerdomains2xxx_3xxx_data.c
powerdomains2xxx_3xxx_data.h
powerdomains2xxx_data.c
powerdomains3xxx_data.c ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx 2015-12-22 16:23:08 -08:00
powerdomains7xx_data.c ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_ret 2016-06-13 01:04:01 -07:00
powerdomains33xx_data.c
powerdomains43xx_data.c
powerdomains44xx_data.c
powerdomains54xx_data.c ARM: OMAP5: powerdomain data: fix powerdomain powerstate 2014-09-08 11:22:40 -05:00
prcm43xx.h ARM: AMx3xx: hwmod: Add data for RNG 2016-11-09 15:39:41 -07:00
prcm44xx.h
prcm_mpu7xx.h
prcm_mpu44xx.c
prcm_mpu44xx.h ARM: OMAP2+: PRCM: cleanup some header includes 2014-05-15 22:34:48 -06:00
prcm_mpu54xx.h
prcm_mpu_44xx_54xx.h
prcm-common.h Merge branch 'dm814x-soc' into omap-for-v4.3/soc 2015-07-23 21:59:18 -07:00
prm2xxx_3xxx.c ARM: OMAP2+: PRM: add generic API for checking hardreset status 2014-10-27 08:39:25 -07:00
prm2xxx_3xxx.h ARM: OMAP2+: PRM: add generic API for checking hardreset status 2014-10-27 08:39:25 -07:00
prm2xxx.c ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm2xxx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm3xxx.c ARM: OMAP2+: PRM: initialize en_uart4_mask and grpsel_uart4_mask 2016-11-07 16:21:53 -07:00
prm3xxx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm7xx.h ARM: DRA7: hwmod: Add reset data for PCIe 2016-02-09 02:18:52 -07:00
prm33xx.c ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm33xx.h ARM: dts: am43xx: Remove wrongly defined RSTST offset for PER Domain 2016-06-22 03:33:25 -07:00
prm44xx_54xx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm44xx.c ARM: OMAP4+: PRM: Add AM437x specific data 2015-07-23 06:08:24 -06:00
prm44xx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm54xx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm_common.c ARM: OMAP2+: Fix randconfig build warning for dm814_pllss_data 2015-12-22 17:01:02 -08:00
prm-regbits-24xx.h
prm-regbits-33xx.h
prm-regbits-34xx.h ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
prm-regbits-44xx.h ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
prm.h ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init 2015-03-31 21:26:53 +03:00
prminst44xx.c ARM: OMAP4+: PRM: add support for passing status register/bit info to reset 2015-05-08 13:05:15 -06:00
prminst44xx.h ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility 2015-03-31 21:26:44 +03:00
scrm44xx.h
scrm54xx.h
sdrc2xxx.c ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
sdrc.c
sdrc.h ARM: OMAP2+: Fix typo in sdrc.h 2016-06-10 04:17:07 -07:00
serial.h
sleep24xx.S
sleep34xx.S ARM: OMAP2+: Fix l2_inv_api_params for rodata 2016-01-22 08:26:08 -08:00
sleep44xx.S ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodata 2016-01-22 08:26:08 -08:00
smartreflex-class3.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
soc.h ARM: SoC platform updates for v4.7 2016-05-18 12:35:46 -07:00
sr_device.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
sram242x.S ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
sram243x.S ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
sram.c ARM: OMAP3: clock: remove un-used core dpll re-program code 2015-10-14 12:35:27 -07:00
sram.h ARM: OMAP3: clock: remove un-used core dpll re-program code 2015-10-14 12:35:27 -07:00
ti81xx-restart.c ARM: OMAP2+: Fix reboot for 81xx 2015-01-14 17:37:16 -08:00
ti81xx.h
timer.c clocksource: Use a plain u64 instead of cycle_t 2016-12-25 11:04:12 +01:00
usb-tusb6010.c ARM: OMAP2+: Remove legacy muxing for usb-tusb6010.c 2016-11-10 12:42:15 -07:00
usb.h ARM: OMAP2+: Remove unused ti81xx platform init code 2015-01-14 17:21:00 -08:00
vc3xxx_data.c ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
vc44xx_data.c ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
vc.c ARM: OMAP3: vc: Remove unused macros 2015-10-12 10:56:36 -07:00
vc.h ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
voltage.c ARM: OMAP2+: avoid NULL pointer dereference 2016-11-07 16:24:53 -07:00
voltage.h ARM: OMAP2+: voltage: Remove some unused functions 2015-01-07 09:53:51 -08:00
voltagedomains2xxx_data.c
voltagedomains3xxx_data.c ARM: appropriate __init annotation for const data 2015-07-28 13:55:27 +02:00
voltagedomains44xx_data.c ARM: appropriate __init annotation for const data 2015-07-28 13:55:27 +02:00
voltagedomains54xx_data.c ARM: appropriate __init annotation for const data 2015-07-28 13:55:27 +02:00
vp3xxx_data.c ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone 2015-03-25 11:03:39 +02:00
vp44xx_data.c ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone 2015-03-25 11:03:39 +02:00
vp.c
vp.h ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone 2015-03-25 11:03:39 +02:00
wd_timer.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
wd_timer.h