linux/arch/arm/boot/dts/imx51-apf51dev.dts
Gwenhael Goavec-Merou 5d150eac17 ARM: imx51-apf51dev: Add parallel display support
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-08 14:36:33 +08:00

125 lines
2.5 KiB
Plaintext

/*
* Copyright 2013 Armadeus Systems - <support@armadeus.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/* APF51Dev is a docking board for the APF51 SOM */
#include "imx51-apf51.dts"
/ {
model = "Armadeus Systems APF51Dev docking/development board";
compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
display@di1 {
compatible = "fsl,imx-parallel-display";
crtcs = <&ipu 0>;
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp1_1>;
display-timings {
lw700 {
native-mode;
clock-frequency = <33000033>;
hactive = <800>;
vactive = <480>;
hback-porch = <96>;
hfront-porch = <96>;
vback-porch = <20>;
vfront-porch = <21>;
hsync-len = <64>;
vsync-len = <4>;
hsync-active = <1>;
vsync-active = <1>;
de-active = <1>;
pixelclk-active = <0>;
};
};
};
gpio-keys {
compatible = "gpio-keys";
user-key {
label = "user";
gpios = <&gpio1 3 0>;
linux,code = <256>; /* BTN_0 */
};
};
leds {
compatible = "gpio-leds";
user {
label = "Heartbeat";
gpios = <&gpio1 2 0>;
linux,default-trigger = "heartbeat";
};
};
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1_1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
status = "okay";
};
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2_1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio3 28 1>, <&gpio3 27 1>;
status = "okay";
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1_1>;
cd-gpios = <&gpio2 29 0>;
bus-width = <4>;
status = "okay";
};
&esdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc2_1>;
bus-width = <4>;
non-removable;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_2>;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
MX51_PAD_EIM_EB2__GPIO2_22 0x0C5
MX51_PAD_EIM_EB3__GPIO2_23 0x0C5
MX51_PAD_EIM_CS4__GPIO2_29 0x100
MX51_PAD_NANDF_D13__GPIO3_27 0x0C5
MX51_PAD_NANDF_D12__GPIO3_28 0x0C5
MX51_PAD_CSPI1_SS0__GPIO4_24 0x0C5
MX51_PAD_CSPI1_SS1__GPIO4_25 0x0C5
MX51_PAD_GPIO1_2__GPIO1_2 0x0C5
MX51_PAD_GPIO1_3__GPIO1_3 0x0C5
>;
};
};
};