linux/drivers/net/qlcnic/qlcnic.h
Amit Kumar Salecha 8a15ad1fb1 qlcnic: release device resources during interface down
Previously we were allocating device resources during probe and
release them during remove.
Now alloc during interface up and release in interface down.
This helps in device performance, as it doesn't need to keep
track of inactive resources.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23 13:16:30 -07:00

1249 lines
36 KiB
C

/*
* Copyright (C) 2009 - QLogic Corporation.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston,
* MA 02111-1307, USA.
*
* The full GNU General Public License is included in this distribution
* in the file called "COPYING".
*
*/
#ifndef _QLCNIC_H_
#define _QLCNIC_H_
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ip.h>
#include <linux/in.h>
#include <linux/tcp.h>
#include <linux/skbuff.h>
#include <linux/firmware.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/timer.h>
#include <linux/vmalloc.h>
#include <linux/io.h>
#include <asm/byteorder.h>
#include "qlcnic_hdr.h"
#define _QLCNIC_LINUX_MAJOR 5
#define _QLCNIC_LINUX_MINOR 0
#define _QLCNIC_LINUX_SUBVERSION 5
#define QLCNIC_LINUX_VERSIONID "5.0.5"
#define QLCNIC_DRV_IDC_VER 0x01
#define QLCNIC_VERSION_CODE(a, b, c) (((a) << 24) + ((b) << 16) + (c))
#define _major(v) (((v) >> 24) & 0xff)
#define _minor(v) (((v) >> 16) & 0xff)
#define _build(v) ((v) & 0xffff)
/* version in image has weird encoding:
* 7:0 - major
* 15:8 - minor
* 31:16 - build (little endian)
*/
#define QLCNIC_DECODE_VERSION(v) \
QLCNIC_VERSION_CODE(((v) & 0xff), (((v) >> 8) & 0xff), ((v) >> 16))
#define QLCNIC_MIN_FW_VERSION QLCNIC_VERSION_CODE(4, 4, 2)
#define QLCNIC_NUM_FLASH_SECTORS (64)
#define QLCNIC_FLASH_SECTOR_SIZE (64 * 1024)
#define QLCNIC_FLASH_TOTAL_SIZE (QLCNIC_NUM_FLASH_SECTORS \
* QLCNIC_FLASH_SECTOR_SIZE)
#define RCV_DESC_RINGSIZE(rds_ring) \
(sizeof(struct rcv_desc) * (rds_ring)->num_desc)
#define RCV_BUFF_RINGSIZE(rds_ring) \
(sizeof(struct qlcnic_rx_buffer) * rds_ring->num_desc)
#define STATUS_DESC_RINGSIZE(sds_ring) \
(sizeof(struct status_desc) * (sds_ring)->num_desc)
#define TX_BUFF_RINGSIZE(tx_ring) \
(sizeof(struct qlcnic_cmd_buffer) * tx_ring->num_desc)
#define TX_DESC_RINGSIZE(tx_ring) \
(sizeof(struct cmd_desc_type0) * tx_ring->num_desc)
#define QLCNIC_P3P_A0 0x50
#define QLCNIC_IS_REVISION_P3P(REVISION) (REVISION >= QLCNIC_P3P_A0)
#define FIRST_PAGE_GROUP_START 0
#define FIRST_PAGE_GROUP_END 0x100000
#define P3_MAX_MTU (9600)
#define QLCNIC_MAX_ETHERHDR 32 /* This contains some padding */
#define QLCNIC_P3_RX_BUF_MAX_LEN (QLCNIC_MAX_ETHERHDR + ETH_DATA_LEN)
#define QLCNIC_P3_RX_JUMBO_BUF_MAX_LEN (QLCNIC_MAX_ETHERHDR + P3_MAX_MTU)
#define QLCNIC_CT_DEFAULT_RX_BUF_LEN 2048
#define QLCNIC_LRO_BUFFER_EXTRA 2048
/* Opcodes to be used with the commands */
#define TX_ETHER_PKT 0x01
#define TX_TCP_PKT 0x02
#define TX_UDP_PKT 0x03
#define TX_IP_PKT 0x04
#define TX_TCP_LSO 0x05
#define TX_TCP_LSO6 0x06
#define TX_IPSEC 0x07
#define TX_IPSEC_CMD 0x0a
#define TX_TCPV6_PKT 0x0b
#define TX_UDPV6_PKT 0x0c
/* Tx defines */
#define MAX_TSO_HEADER_DESC 2
#define MGMT_CMD_DESC_RESV 4
#define TX_STOP_THRESH ((MAX_SKB_FRAGS >> 2) + MAX_TSO_HEADER_DESC \
+ MGMT_CMD_DESC_RESV)
#define QLCNIC_MAX_TX_TIMEOUTS 2
/*
* Following are the states of the Phantom. Phantom will set them and
* Host will read to check if the fields are correct.
*/
#define PHAN_INITIALIZE_FAILED 0xffff
#define PHAN_INITIALIZE_COMPLETE 0xff01
/* Host writes the following to notify that it has done the init-handshake */
#define PHAN_INITIALIZE_ACK 0xf00f
#define PHAN_PEG_RCV_INITIALIZED 0xff01
#define NUM_RCV_DESC_RINGS 3
#define NUM_STS_DESC_RINGS 4
#define RCV_RING_NORMAL 0
#define RCV_RING_JUMBO 1
#define MIN_CMD_DESCRIPTORS 64
#define MIN_RCV_DESCRIPTORS 64
#define MIN_JUMBO_DESCRIPTORS 32
#define MAX_CMD_DESCRIPTORS 1024
#define MAX_RCV_DESCRIPTORS_1G 4096
#define MAX_RCV_DESCRIPTORS_10G 8192
#define MAX_JUMBO_RCV_DESCRIPTORS_1G 512
#define MAX_JUMBO_RCV_DESCRIPTORS_10G 1024
#define DEFAULT_RCV_DESCRIPTORS_1G 2048
#define DEFAULT_RCV_DESCRIPTORS_10G 4096
#define get_next_index(index, length) \
(((index) + 1) & ((length) - 1))
/*
* Following data structures describe the descriptors that will be used.
* Added fileds of tcpHdrSize and ipHdrSize, The driver needs to do it only when
* we are doing LSO (above the 1500 size packet) only.
*/
#define FLAGS_VLAN_TAGGED 0x10
#define FLAGS_VLAN_OOB 0x40
#define qlcnic_set_tx_vlan_tci(cmd_desc, v) \
(cmd_desc)->vlan_TCI = cpu_to_le16(v);
#define qlcnic_set_cmd_desc_port(cmd_desc, var) \
((cmd_desc)->port_ctxid |= ((var) & 0x0F))
#define qlcnic_set_cmd_desc_ctxid(cmd_desc, var) \
((cmd_desc)->port_ctxid |= ((var) << 4 & 0xF0))
#define qlcnic_set_tx_port(_desc, _port) \
((_desc)->port_ctxid = ((_port) & 0xf) | (((_port) << 4) & 0xf0))
#define qlcnic_set_tx_flags_opcode(_desc, _flags, _opcode) \
((_desc)->flags_opcode = \
cpu_to_le16(((_flags) & 0x7f) | (((_opcode) & 0x3f) << 7)))
#define qlcnic_set_tx_frags_len(_desc, _frags, _len) \
((_desc)->nfrags__length = \
cpu_to_le32(((_frags) & 0xff) | (((_len) & 0xffffff) << 8)))
struct cmd_desc_type0 {
u8 tcp_hdr_offset; /* For LSO only */
u8 ip_hdr_offset; /* For LSO only */
__le16 flags_opcode; /* 15:13 unused, 12:7 opcode, 6:0 flags */
__le32 nfrags__length; /* 31:8 total len, 7:0 frag count */
__le64 addr_buffer2;
__le16 reference_handle;
__le16 mss;
u8 port_ctxid; /* 7:4 ctxid 3:0 port */
u8 total_hdr_length; /* LSO only : MAC+IP+TCP Hdr size */
__le16 conn_id; /* IPSec offoad only */
__le64 addr_buffer3;
__le64 addr_buffer1;
__le16 buffer_length[4];
__le64 addr_buffer4;
u8 eth_addr[ETH_ALEN];
__le16 vlan_TCI;
} __attribute__ ((aligned(64)));
/* Note: sizeof(rcv_desc) should always be a mutliple of 2 */
struct rcv_desc {
__le16 reference_handle;
__le16 reserved;
__le32 buffer_length; /* allocated buffer length (usually 2K) */
__le64 addr_buffer;
};
/* opcode field in status_desc */
#define QLCNIC_SYN_OFFLOAD 0x03
#define QLCNIC_RXPKT_DESC 0x04
#define QLCNIC_OLD_RXPKT_DESC 0x3f
#define QLCNIC_RESPONSE_DESC 0x05
#define QLCNIC_LRO_DESC 0x12
/* for status field in status_desc */
#define STATUS_CKSUM_OK (2)
/* owner bits of status_desc */
#define STATUS_OWNER_HOST (0x1ULL << 56)
#define STATUS_OWNER_PHANTOM (0x2ULL << 56)
/* Status descriptor:
0-3 port, 4-7 status, 8-11 type, 12-27 total_length
28-43 reference_handle, 44-47 protocol, 48-52 pkt_offset
53-55 desc_cnt, 56-57 owner, 58-63 opcode
*/
#define qlcnic_get_sts_port(sts_data) \
((sts_data) & 0x0F)
#define qlcnic_get_sts_status(sts_data) \
(((sts_data) >> 4) & 0x0F)
#define qlcnic_get_sts_type(sts_data) \
(((sts_data) >> 8) & 0x0F)
#define qlcnic_get_sts_totallength(sts_data) \
(((sts_data) >> 12) & 0xFFFF)
#define qlcnic_get_sts_refhandle(sts_data) \
(((sts_data) >> 28) & 0xFFFF)
#define qlcnic_get_sts_prot(sts_data) \
(((sts_data) >> 44) & 0x0F)
#define qlcnic_get_sts_pkt_offset(sts_data) \
(((sts_data) >> 48) & 0x1F)
#define qlcnic_get_sts_desc_cnt(sts_data) \
(((sts_data) >> 53) & 0x7)
#define qlcnic_get_sts_opcode(sts_data) \
(((sts_data) >> 58) & 0x03F)
#define qlcnic_get_lro_sts_refhandle(sts_data) \
((sts_data) & 0x0FFFF)
#define qlcnic_get_lro_sts_length(sts_data) \
(((sts_data) >> 16) & 0x0FFFF)
#define qlcnic_get_lro_sts_l2_hdr_offset(sts_data) \
(((sts_data) >> 32) & 0x0FF)
#define qlcnic_get_lro_sts_l4_hdr_offset(sts_data) \
(((sts_data) >> 40) & 0x0FF)
#define qlcnic_get_lro_sts_timestamp(sts_data) \
(((sts_data) >> 48) & 0x1)
#define qlcnic_get_lro_sts_type(sts_data) \
(((sts_data) >> 49) & 0x7)
#define qlcnic_get_lro_sts_push_flag(sts_data) \
(((sts_data) >> 52) & 0x1)
#define qlcnic_get_lro_sts_seq_number(sts_data) \
((sts_data) & 0x0FFFFFFFF)
struct status_desc {
__le64 status_desc_data[2];
} __attribute__ ((aligned(16)));
/* UNIFIED ROMIMAGE */
#define QLCNIC_UNI_FW_MIN_SIZE 0xc8000
#define QLCNIC_UNI_DIR_SECT_PRODUCT_TBL 0x0
#define QLCNIC_UNI_DIR_SECT_BOOTLD 0x6
#define QLCNIC_UNI_DIR_SECT_FW 0x7
/*Offsets */
#define QLCNIC_UNI_CHIP_REV_OFF 10
#define QLCNIC_UNI_FLAGS_OFF 11
#define QLCNIC_UNI_BIOS_VERSION_OFF 12
#define QLCNIC_UNI_BOOTLD_IDX_OFF 27
#define QLCNIC_UNI_FIRMWARE_IDX_OFF 29
struct uni_table_desc{
u32 findex;
u32 num_entries;
u32 entry_size;
u32 reserved[5];
};
struct uni_data_desc{
u32 findex;
u32 size;
u32 reserved[5];
};
/* Magic number to let user know flash is programmed */
#define QLCNIC_BDINFO_MAGIC 0x12345678
#define QLCNIC_BRDTYPE_P3_REF_QG 0x0021
#define QLCNIC_BRDTYPE_P3_HMEZ 0x0022
#define QLCNIC_BRDTYPE_P3_10G_CX4_LP 0x0023
#define QLCNIC_BRDTYPE_P3_4_GB 0x0024
#define QLCNIC_BRDTYPE_P3_IMEZ 0x0025
#define QLCNIC_BRDTYPE_P3_10G_SFP_PLUS 0x0026
#define QLCNIC_BRDTYPE_P3_10000_BASE_T 0x0027
#define QLCNIC_BRDTYPE_P3_XG_LOM 0x0028
#define QLCNIC_BRDTYPE_P3_4_GB_MM 0x0029
#define QLCNIC_BRDTYPE_P3_10G_SFP_CT 0x002a
#define QLCNIC_BRDTYPE_P3_10G_SFP_QT 0x002b
#define QLCNIC_BRDTYPE_P3_10G_CX4 0x0031
#define QLCNIC_BRDTYPE_P3_10G_XFP 0x0032
#define QLCNIC_BRDTYPE_P3_10G_TP 0x0080
#define QLCNIC_MSIX_TABLE_OFFSET 0x44
/* Flash memory map */
#define QLCNIC_BRDCFG_START 0x4000 /* board config */
#define QLCNIC_BOOTLD_START 0x10000 /* bootld */
#define QLCNIC_IMAGE_START 0x43000 /* compressed image */
#define QLCNIC_USER_START 0x3E8000 /* Firmare info */
#define QLCNIC_FW_VERSION_OFFSET (QLCNIC_USER_START+0x408)
#define QLCNIC_FW_SIZE_OFFSET (QLCNIC_USER_START+0x40c)
#define QLCNIC_FW_SERIAL_NUM_OFFSET (QLCNIC_USER_START+0x81c)
#define QLCNIC_BIOS_VERSION_OFFSET (QLCNIC_USER_START+0x83c)
#define QLCNIC_BRDTYPE_OFFSET (QLCNIC_BRDCFG_START+0x8)
#define QLCNIC_FW_MAGIC_OFFSET (QLCNIC_BRDCFG_START+0x128)
#define QLCNIC_FW_MIN_SIZE (0x3fffff)
#define QLCNIC_UNIFIED_ROMIMAGE 0
#define QLCNIC_FLASH_ROMIMAGE 1
#define QLCNIC_UNKNOWN_ROMIMAGE 0xff
#define QLCNIC_UNIFIED_ROMIMAGE_NAME "phanfw.bin"
#define QLCNIC_FLASH_ROMIMAGE_NAME "flash"
extern char qlcnic_driver_name[];
/* Number of status descriptors to handle per interrupt */
#define MAX_STATUS_HANDLE (64)
/*
* qlcnic_skb_frag{} is to contain mapping info for each SG list. This
* has to be freed when DMA is complete. This is part of qlcnic_tx_buffer{}.
*/
struct qlcnic_skb_frag {
u64 dma;
u64 length;
};
struct qlcnic_recv_crb {
u32 crb_rcv_producer[NUM_RCV_DESC_RINGS];
u32 crb_sts_consumer[NUM_STS_DESC_RINGS];
u32 sw_int_mask[NUM_STS_DESC_RINGS];
};
/* Following defines are for the state of the buffers */
#define QLCNIC_BUFFER_FREE 0
#define QLCNIC_BUFFER_BUSY 1
/*
* There will be one qlcnic_buffer per skb packet. These will be
* used to save the dma info for pci_unmap_page()
*/
struct qlcnic_cmd_buffer {
struct sk_buff *skb;
struct qlcnic_skb_frag frag_array[MAX_SKB_FRAGS + 1];
u32 frag_count;
};
/* In rx_buffer, we do not need multiple fragments as is a single buffer */
struct qlcnic_rx_buffer {
struct list_head list;
struct sk_buff *skb;
u64 dma;
u16 ref_handle;
};
/* Board types */
#define QLCNIC_GBE 0x01
#define QLCNIC_XGBE 0x02
/*
* One hardware_context{} per adapter
* contains interrupt info as well shared hardware info.
*/
struct qlcnic_hardware_context {
void __iomem *pci_base0;
void __iomem *ocm_win_crb;
unsigned long pci_len0;
rwlock_t crb_lock;
struct mutex mem_lock;
u8 revision_id;
u8 pci_func;
u8 linkup;
u16 port_type;
u16 board_type;
};
struct qlcnic_adapter_stats {
u64 xmitcalled;
u64 xmitfinished;
u64 rxdropped;
u64 txdropped;
u64 csummed;
u64 rx_pkts;
u64 lro_pkts;
u64 rxbytes;
u64 txbytes;
u64 lrobytes;
u64 lso_frames;
u64 xmit_on;
u64 xmit_off;
u64 skb_alloc_failure;
u64 null_rxbuf;
u64 rx_dma_map_error;
u64 tx_dma_map_error;
};
/*
* Rcv Descriptor Context. One such per Rcv Descriptor. There may
* be one Rcv Descriptor for normal packets, one for jumbo and may be others.
*/
struct qlcnic_host_rds_ring {
u32 producer;
u32 num_desc;
u32 dma_size;
u32 skb_size;
u32 flags;
void __iomem *crb_rcv_producer;
struct rcv_desc *desc_head;
struct qlcnic_rx_buffer *rx_buf_arr;
struct list_head free_list;
spinlock_t lock;
dma_addr_t phys_addr;
};
struct qlcnic_host_sds_ring {
u32 consumer;
u32 num_desc;
void __iomem *crb_sts_consumer;
void __iomem *crb_intr_mask;
struct status_desc *desc_head;
struct qlcnic_adapter *adapter;
struct napi_struct napi;
struct list_head free_list[NUM_RCV_DESC_RINGS];
int irq;
dma_addr_t phys_addr;
char name[IFNAMSIZ+4];
};
struct qlcnic_host_tx_ring {
u32 producer;
__le32 *hw_consumer;
u32 sw_consumer;
void __iomem *crb_cmd_producer;
u32 num_desc;
struct netdev_queue *txq;
struct qlcnic_cmd_buffer *cmd_buf_arr;
struct cmd_desc_type0 *desc_head;
dma_addr_t phys_addr;
dma_addr_t hw_cons_phys_addr;
};
/*
* Receive context. There is one such structure per instance of the
* receive processing. Any state information that is relevant to
* the receive, and is must be in this structure. The global data may be
* present elsewhere.
*/
struct qlcnic_recv_context {
u32 state;
u16 context_id;
u16 virt_port;
struct qlcnic_host_rds_ring *rds_rings;
struct qlcnic_host_sds_ring *sds_rings;
};
/* HW context creation */
#define QLCNIC_OS_CRB_RETRY_COUNT 4000
#define QLCNIC_CDRP_SIGNATURE_MAKE(pcifn, version) \
(((pcifn) & 0xff) | (((version) & 0xff) << 8) | (0xcafe << 16))
#define QLCNIC_CDRP_CMD_BIT 0x80000000
/*
* All responses must have the QLCNIC_CDRP_CMD_BIT cleared
* in the crb QLCNIC_CDRP_CRB_OFFSET.
*/
#define QLCNIC_CDRP_FORM_RSP(rsp) (rsp)
#define QLCNIC_CDRP_IS_RSP(rsp) (((rsp) & QLCNIC_CDRP_CMD_BIT) == 0)
#define QLCNIC_CDRP_RSP_OK 0x00000001
#define QLCNIC_CDRP_RSP_FAIL 0x00000002
#define QLCNIC_CDRP_RSP_TIMEOUT 0x00000003
/*
* All commands must have the QLCNIC_CDRP_CMD_BIT set in
* the crb QLCNIC_CDRP_CRB_OFFSET.
*/
#define QLCNIC_CDRP_FORM_CMD(cmd) (QLCNIC_CDRP_CMD_BIT | (cmd))
#define QLCNIC_CDRP_IS_CMD(cmd) (((cmd) & QLCNIC_CDRP_CMD_BIT) != 0)
#define QLCNIC_CDRP_CMD_SUBMIT_CAPABILITIES 0x00000001
#define QLCNIC_CDRP_CMD_READ_MAX_RDS_PER_CTX 0x00000002
#define QLCNIC_CDRP_CMD_READ_MAX_SDS_PER_CTX 0x00000003
#define QLCNIC_CDRP_CMD_READ_MAX_RULES_PER_CTX 0x00000004
#define QLCNIC_CDRP_CMD_READ_MAX_RX_CTX 0x00000005
#define QLCNIC_CDRP_CMD_READ_MAX_TX_CTX 0x00000006
#define QLCNIC_CDRP_CMD_CREATE_RX_CTX 0x00000007
#define QLCNIC_CDRP_CMD_DESTROY_RX_CTX 0x00000008
#define QLCNIC_CDRP_CMD_CREATE_TX_CTX 0x00000009
#define QLCNIC_CDRP_CMD_DESTROY_TX_CTX 0x0000000a
#define QLCNIC_CDRP_CMD_SETUP_STATISTICS 0x0000000e
#define QLCNIC_CDRP_CMD_GET_STATISTICS 0x0000000f
#define QLCNIC_CDRP_CMD_DELETE_STATISTICS 0x00000010
#define QLCNIC_CDRP_CMD_SET_MTU 0x00000012
#define QLCNIC_CDRP_CMD_READ_PHY 0x00000013
#define QLCNIC_CDRP_CMD_WRITE_PHY 0x00000014
#define QLCNIC_CDRP_CMD_READ_HW_REG 0x00000015
#define QLCNIC_CDRP_CMD_GET_FLOW_CTL 0x00000016
#define QLCNIC_CDRP_CMD_SET_FLOW_CTL 0x00000017
#define QLCNIC_CDRP_CMD_READ_MAX_MTU 0x00000018
#define QLCNIC_CDRP_CMD_READ_MAX_LRO 0x00000019
#define QLCNIC_CDRP_CMD_CONFIGURE_TOE 0x0000001a
#define QLCNIC_CDRP_CMD_FUNC_ATTRIB 0x0000001b
#define QLCNIC_CDRP_CMD_READ_PEXQ_PARAMETERS 0x0000001c
#define QLCNIC_CDRP_CMD_GET_LIC_CAPABILITIES 0x0000001d
#define QLCNIC_CDRP_CMD_READ_MAX_LRO_PER_BOARD 0x0000001e
#define QLCNIC_CDRP_CMD_MAC_ADDRESS 0x0000001f
#define QLCNIC_CDRP_CMD_GET_PCI_INFO 0x00000020
#define QLCNIC_CDRP_CMD_GET_NIC_INFO 0x00000021
#define QLCNIC_CDRP_CMD_SET_NIC_INFO 0x00000022
#define QLCNIC_CDRP_CMD_RESET_NPAR 0x00000023
#define QLCNIC_CDRP_CMD_GET_ESWITCH_CAPABILITY 0x00000024
#define QLCNIC_CDRP_CMD_TOGGLE_ESWITCH 0x00000025
#define QLCNIC_CDRP_CMD_GET_ESWITCH_STATUS 0x00000026
#define QLCNIC_CDRP_CMD_SET_PORTMIRRORING 0x00000027
#define QLCNIC_CDRP_CMD_CONFIGURE_ESWITCH 0x00000028
#define QLCNIC_RCODE_SUCCESS 0
#define QLCNIC_RCODE_TIMEOUT 17
#define QLCNIC_DESTROY_CTX_RESET 0
/*
* Capabilities Announced
*/
#define QLCNIC_CAP0_LEGACY_CONTEXT (1)
#define QLCNIC_CAP0_LEGACY_MN (1 << 2)
#define QLCNIC_CAP0_LSO (1 << 6)
#define QLCNIC_CAP0_JUMBO_CONTIGUOUS (1 << 7)
#define QLCNIC_CAP0_LRO_CONTIGUOUS (1 << 8)
#define QLCNIC_CAP0_VALIDOFF (1 << 11)
/*
* Context state
*/
#define QLCNIC_HOST_CTX_STATE_ACTIVE 2
/*
* Rx context
*/
struct qlcnic_hostrq_sds_ring {
__le64 host_phys_addr; /* Ring base addr */
__le32 ring_size; /* Ring entries */
__le16 msi_index;
__le16 rsvd; /* Padding */
};
struct qlcnic_hostrq_rds_ring {
__le64 host_phys_addr; /* Ring base addr */
__le64 buff_size; /* Packet buffer size */
__le32 ring_size; /* Ring entries */
__le32 ring_kind; /* Class of ring */
};
struct qlcnic_hostrq_rx_ctx {
__le64 host_rsp_dma_addr; /* Response dma'd here */
__le32 capabilities[4]; /* Flag bit vector */
__le32 host_int_crb_mode; /* Interrupt crb usage */
__le32 host_rds_crb_mode; /* RDS crb usage */
/* These ring offsets are relative to data[0] below */
__le32 rds_ring_offset; /* Offset to RDS config */
__le32 sds_ring_offset; /* Offset to SDS config */
__le16 num_rds_rings; /* Count of RDS rings */
__le16 num_sds_rings; /* Count of SDS rings */
__le16 valid_field_offset;
u8 txrx_sds_binding;
u8 msix_handler;
u8 reserved[128]; /* reserve space for future expansion*/
/* MUST BE 64-bit aligned.
The following is packed:
- N hostrq_rds_rings
- N hostrq_sds_rings */
char data[0];
};
struct qlcnic_cardrsp_rds_ring{
__le32 host_producer_crb; /* Crb to use */
__le32 rsvd1; /* Padding */
};
struct qlcnic_cardrsp_sds_ring {
__le32 host_consumer_crb; /* Crb to use */
__le32 interrupt_crb; /* Crb to use */
};
struct qlcnic_cardrsp_rx_ctx {
/* These ring offsets are relative to data[0] below */
__le32 rds_ring_offset; /* Offset to RDS config */
__le32 sds_ring_offset; /* Offset to SDS config */
__le32 host_ctx_state; /* Starting State */
__le32 num_fn_per_port; /* How many PCI fn share the port */
__le16 num_rds_rings; /* Count of RDS rings */
__le16 num_sds_rings; /* Count of SDS rings */
__le16 context_id; /* Handle for context */
u8 phys_port; /* Physical id of port */
u8 virt_port; /* Virtual/Logical id of port */
u8 reserved[128]; /* save space for future expansion */
/* MUST BE 64-bit aligned.
The following is packed:
- N cardrsp_rds_rings
- N cardrs_sds_rings */
char data[0];
};
#define SIZEOF_HOSTRQ_RX(HOSTRQ_RX, rds_rings, sds_rings) \
(sizeof(HOSTRQ_RX) + \
(rds_rings)*(sizeof(struct qlcnic_hostrq_rds_ring)) + \
(sds_rings)*(sizeof(struct qlcnic_hostrq_sds_ring)))
#define SIZEOF_CARDRSP_RX(CARDRSP_RX, rds_rings, sds_rings) \
(sizeof(CARDRSP_RX) + \
(rds_rings)*(sizeof(struct qlcnic_cardrsp_rds_ring)) + \
(sds_rings)*(sizeof(struct qlcnic_cardrsp_sds_ring)))
/*
* Tx context
*/
struct qlcnic_hostrq_cds_ring {
__le64 host_phys_addr; /* Ring base addr */
__le32 ring_size; /* Ring entries */
__le32 rsvd; /* Padding */
};
struct qlcnic_hostrq_tx_ctx {
__le64 host_rsp_dma_addr; /* Response dma'd here */
__le64 cmd_cons_dma_addr; /* */
__le64 dummy_dma_addr; /* */
__le32 capabilities[4]; /* Flag bit vector */
__le32 host_int_crb_mode; /* Interrupt crb usage */
__le32 rsvd1; /* Padding */
__le16 rsvd2; /* Padding */
__le16 interrupt_ctl;
__le16 msi_index;
__le16 rsvd3; /* Padding */
struct qlcnic_hostrq_cds_ring cds_ring; /* Desc of cds ring */
u8 reserved[128]; /* future expansion */
};
struct qlcnic_cardrsp_cds_ring {
__le32 host_producer_crb; /* Crb to use */
__le32 interrupt_crb; /* Crb to use */
};
struct qlcnic_cardrsp_tx_ctx {
__le32 host_ctx_state; /* Starting state */
__le16 context_id; /* Handle for context */
u8 phys_port; /* Physical id of port */
u8 virt_port; /* Virtual/Logical id of port */
struct qlcnic_cardrsp_cds_ring cds_ring; /* Card cds settings */
u8 reserved[128]; /* future expansion */
};
#define SIZEOF_HOSTRQ_TX(HOSTRQ_TX) (sizeof(HOSTRQ_TX))
#define SIZEOF_CARDRSP_TX(CARDRSP_TX) (sizeof(CARDRSP_TX))
/* CRB */
#define QLCNIC_HOST_RDS_CRB_MODE_UNIQUE 0
#define QLCNIC_HOST_RDS_CRB_MODE_SHARED 1
#define QLCNIC_HOST_RDS_CRB_MODE_CUSTOM 2
#define QLCNIC_HOST_RDS_CRB_MODE_MAX 3
#define QLCNIC_HOST_INT_CRB_MODE_UNIQUE 0
#define QLCNIC_HOST_INT_CRB_MODE_SHARED 1
#define QLCNIC_HOST_INT_CRB_MODE_NORX 2
#define QLCNIC_HOST_INT_CRB_MODE_NOTX 3
#define QLCNIC_HOST_INT_CRB_MODE_NORXTX 4
/* MAC */
#define MC_COUNT_P3 38
#define QLCNIC_MAC_NOOP 0
#define QLCNIC_MAC_ADD 1
#define QLCNIC_MAC_DEL 2
struct qlcnic_mac_list_s {
struct list_head list;
uint8_t mac_addr[ETH_ALEN+2];
};
/*
* Interrupt coalescing defaults. The defaults are for 1500 MTU. It is
* adjusted based on configured MTU.
*/
#define QLCNIC_DEFAULT_INTR_COALESCE_RX_TIME_US 3
#define QLCNIC_DEFAULT_INTR_COALESCE_RX_PACKETS 256
#define QLCNIC_DEFAULT_INTR_COALESCE_TX_PACKETS 64
#define QLCNIC_DEFAULT_INTR_COALESCE_TX_TIME_US 4
#define QLCNIC_INTR_DEFAULT 0x04
union qlcnic_nic_intr_coalesce_data {
struct {
u16 rx_packets;
u16 rx_time_us;
u16 tx_packets;
u16 tx_time_us;
} data;
u64 word;
};
struct qlcnic_nic_intr_coalesce {
u16 stats_time_us;
u16 rate_sample_time;
u16 flags;
u16 rsvd_1;
u32 low_threshold;
u32 high_threshold;
union qlcnic_nic_intr_coalesce_data normal;
union qlcnic_nic_intr_coalesce_data low;
union qlcnic_nic_intr_coalesce_data high;
union qlcnic_nic_intr_coalesce_data irq;
};
#define QLCNIC_HOST_REQUEST 0x13
#define QLCNIC_REQUEST 0x14
#define QLCNIC_MAC_EVENT 0x1
#define QLCNIC_IP_UP 2
#define QLCNIC_IP_DOWN 3
/*
* Driver --> Firmware
*/
#define QLCNIC_H2C_OPCODE_START 0
#define QLCNIC_H2C_OPCODE_CONFIG_RSS 1
#define QLCNIC_H2C_OPCODE_CONFIG_RSS_TBL 2
#define QLCNIC_H2C_OPCODE_CONFIG_INTR_COALESCE 3
#define QLCNIC_H2C_OPCODE_CONFIG_LED 4
#define QLCNIC_H2C_OPCODE_CONFIG_PROMISCUOUS 5
#define QLCNIC_H2C_OPCODE_CONFIG_L2_MAC 6
#define QLCNIC_H2C_OPCODE_LRO_REQUEST 7
#define QLCNIC_H2C_OPCODE_GET_SNMP_STATS 8
#define QLCNIC_H2C_OPCODE_PROXY_START_REQUEST 9
#define QLCNIC_H2C_OPCODE_PROXY_STOP_REQUEST 10
#define QLCNIC_H2C_OPCODE_PROXY_SET_MTU 11
#define QLCNIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE 12
#define QLCNIC_H2C_OPCODE_GET_FINGER_PRINT_REQUEST 13
#define QLCNIC_H2C_OPCODE_INSTALL_LICENSE_REQUEST 14
#define QLCNIC_H2C_OPCODE_GET_LICENSE_CAPABILITY_REQUEST 15
#define QLCNIC_H2C_OPCODE_GET_NET_STATS 16
#define QLCNIC_H2C_OPCODE_PROXY_UPDATE_P2V 17
#define QLCNIC_H2C_OPCODE_CONFIG_IPADDR 18
#define QLCNIC_H2C_OPCODE_CONFIG_LOOPBACK 19
#define QLCNIC_H2C_OPCODE_PROXY_STOP_DONE 20
#define QLCNIC_H2C_OPCODE_GET_LINKEVENT 21
#define QLCNIC_C2C_OPCODE 22
#define QLCNIC_H2C_OPCODE_CONFIG_BRIDGING 23
#define QLCNIC_H2C_OPCODE_CONFIG_HW_LRO 24
#define QLCNIC_H2C_OPCODE_LAST 25
/*
* Firmware --> Driver
*/
#define QLCNIC_C2H_OPCODE_START 128
#define QLCNIC_C2H_OPCODE_CONFIG_RSS_RESPONSE 129
#define QLCNIC_C2H_OPCODE_CONFIG_RSS_TBL_RESPONSE 130
#define QLCNIC_C2H_OPCODE_CONFIG_MAC_RESPONSE 131
#define QLCNIC_C2H_OPCODE_CONFIG_PROMISCUOUS_RESPONSE 132
#define QLCNIC_C2H_OPCODE_CONFIG_L2_MAC_RESPONSE 133
#define QLCNIC_C2H_OPCODE_LRO_DELETE_RESPONSE 134
#define QLCNIC_C2H_OPCODE_LRO_ADD_FAILURE_RESPONSE 135
#define QLCNIC_C2H_OPCODE_GET_SNMP_STATS 136
#define QLCNIC_C2H_OPCODE_GET_FINGER_PRINT_REPLY 137
#define QLCNIC_C2H_OPCODE_INSTALL_LICENSE_REPLY 138
#define QLCNIC_C2H_OPCODE_GET_LICENSE_CAPABILITIES_REPLY 139
#define QLCNIC_C2H_OPCODE_GET_NET_STATS_RESPONSE 140
#define QLCNIC_C2H_OPCODE_GET_LINKEVENT_RESPONSE 141
#define QLCNIC_C2H_OPCODE_LAST 142
#define VPORT_MISS_MODE_DROP 0 /* drop all unmatched */
#define VPORT_MISS_MODE_ACCEPT_ALL 1 /* accept all packets */
#define VPORT_MISS_MODE_ACCEPT_MULTI 2 /* accept unmatched multicast */
#define QLCNIC_LRO_REQUEST_CLEANUP 4
/* Capabilites received */
#define QLCNIC_FW_CAPABILITY_BDG (1 << 8)
#define QLCNIC_FW_CAPABILITY_FVLANTX (1 << 9)
#define QLCNIC_FW_CAPABILITY_HW_LRO (1 << 10)
/* module types */
#define LINKEVENT_MODULE_NOT_PRESENT 1
#define LINKEVENT_MODULE_OPTICAL_UNKNOWN 2
#define LINKEVENT_MODULE_OPTICAL_SRLR 3
#define LINKEVENT_MODULE_OPTICAL_LRM 4
#define LINKEVENT_MODULE_OPTICAL_SFP_1G 5
#define LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE 6
#define LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN 7
#define LINKEVENT_MODULE_TWINAX 8
#define LINKSPEED_10GBPS 10000
#define LINKSPEED_1GBPS 1000
#define LINKSPEED_100MBPS 100
#define LINKSPEED_10MBPS 10
#define LINKSPEED_ENCODED_10MBPS 0
#define LINKSPEED_ENCODED_100MBPS 1
#define LINKSPEED_ENCODED_1GBPS 2
#define LINKEVENT_AUTONEG_DISABLED 0
#define LINKEVENT_AUTONEG_ENABLED 1
#define LINKEVENT_HALF_DUPLEX 0
#define LINKEVENT_FULL_DUPLEX 1
#define LINKEVENT_LINKSPEED_MBPS 0
#define LINKEVENT_LINKSPEED_ENCODED 1
#define AUTO_FW_RESET_ENABLED 0x01
/* firmware response header:
* 63:58 - message type
* 57:56 - owner
* 55:53 - desc count
* 52:48 - reserved
* 47:40 - completion id
* 39:32 - opcode
* 31:16 - error code
* 15:00 - reserved
*/
#define qlcnic_get_nic_msg_opcode(msg_hdr) \
((msg_hdr >> 32) & 0xFF)
struct qlcnic_fw_msg {
union {
struct {
u64 hdr;
u64 body[7];
};
u64 words[8];
};
};
struct qlcnic_nic_req {
__le64 qhdr;
__le64 req_hdr;
__le64 words[6];
};
struct qlcnic_mac_req {
u8 op;
u8 tag;
u8 mac_addr[6];
};
#define QLCNIC_MSI_ENABLED 0x02
#define QLCNIC_MSIX_ENABLED 0x04
#define QLCNIC_LRO_ENABLED 0x08
#define QLCNIC_BRIDGE_ENABLED 0X10
#define QLCNIC_DIAG_ENABLED 0x20
#define QLCNIC_ESWITCH_ENABLED 0x40
#define QLCNIC_IS_MSI_FAMILY(adapter) \
((adapter)->flags & (QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED))
#define MSIX_ENTRIES_PER_ADAPTER NUM_STS_DESC_RINGS
#define QLCNIC_MSIX_TBL_SPACE 8192
#define QLCNIC_PCI_REG_MSIX_TBL 0x44
#define QLCNIC_MSIX_TBL_PGSIZE 4096
#define QLCNIC_NETDEV_WEIGHT 128
#define QLCNIC_ADAPTER_UP_MAGIC 777
#define __QLCNIC_FW_ATTACHED 0
#define __QLCNIC_DEV_UP 1
#define __QLCNIC_RESETTING 2
#define __QLCNIC_START_FW 4
#define QLCNIC_INTERRUPT_TEST 1
#define QLCNIC_LOOPBACK_TEST 2
struct qlcnic_adapter {
struct qlcnic_hardware_context ahw;
struct net_device *netdev;
struct pci_dev *pdev;
struct list_head mac_list;
spinlock_t tx_clean_lock;
u16 num_txd;
u16 num_rxd;
u16 num_jumbo_rxd;
u8 max_rds_rings;
u8 max_sds_rings;
u8 driver_mismatch;
u8 msix_supported;
u8 rx_csum;
u8 portnum;
u8 physical_port;
u8 mc_enabled;
u8 max_mc_count;
u8 rss_supported;
u8 fw_wait_cnt;
u8 fw_fail_cnt;
u8 tx_timeo_cnt;
u8 need_fw_reset;
u8 has_link_events;
u8 fw_type;
u16 tx_context_id;
u16 mtu;
u16 is_up;
u16 link_speed;
u16 link_duplex;
u16 link_autoneg;
u16 module_type;
u16 op_mode;
u16 switch_mode;
u16 max_tx_ques;
u16 max_rx_ques;
u16 min_tx_bw;
u16 max_tx_bw;
u16 max_mtu;
u32 fw_hal_version;
u32 capabilities;
u32 flags;
u32 irq;
u32 temp;
u32 int_vec_bit;
u32 heartbit;
u8 max_mac_filters;
u8 dev_state;
u8 diag_test;
u8 diag_cnt;
u8 reset_ack_timeo;
u8 dev_init_timeo;
u16 msg_enable;
u8 mac_addr[ETH_ALEN];
u64 dev_rst_time;
struct qlcnic_pci_info *npars;
struct qlcnic_eswitch *eswitch;
struct qlcnic_nic_template *nic_ops;
struct qlcnic_adapter_stats stats;
struct qlcnic_recv_context recv_ctx;
struct qlcnic_host_tx_ring *tx_ring;
void __iomem *tgt_mask_reg;
void __iomem *tgt_status_reg;
void __iomem *crb_int_state_reg;
void __iomem *isr_int_vec;
struct msix_entry msix_entries[MSIX_ENTRIES_PER_ADAPTER];
struct delayed_work fw_work;
struct work_struct tx_timeout_task;
struct qlcnic_nic_intr_coalesce coal;
unsigned long state;
__le32 file_prd_off; /*File fw product offset*/
u32 fw_version;
const struct firmware *fw;
};
struct qlcnic_info {
__le16 pci_func;
__le16 op_mode; /* 1 = Priv, 2 = NP, 3 = NP passthru */
__le16 phys_port;
__le16 switch_mode; /* 0 = disabled, 1 = int, 2 = ext */
__le32 capabilities;
u8 max_mac_filters;
u8 reserved1;
__le16 max_mtu;
__le16 max_tx_ques;
__le16 max_rx_ques;
__le16 min_tx_bw;
__le16 max_tx_bw;
u8 reserved2[104];
};
struct qlcnic_pci_info {
__le16 id; /* pci function id */
__le16 active; /* 1 = Enabled */
__le16 type; /* 1 = NIC, 2 = FCoE, 3 = iSCSI */
__le16 default_port; /* default port number */
__le16 tx_min_bw; /* Multiple of 100mbpc */
__le16 tx_max_bw;
__le16 reserved1[2];
u8 mac[ETH_ALEN];
u8 reserved2[106];
};
struct qlcnic_eswitch {
u8 port;
u8 active_vports;
u8 active_vlans;
u8 active_ucast_filters;
u8 max_ucast_filters;
u8 max_active_vlans;
u32 flags;
#define QLCNIC_SWITCH_ENABLE BIT_1
#define QLCNIC_SWITCH_VLAN_FILTERING BIT_2
#define QLCNIC_SWITCH_PROMISC_MODE BIT_3
#define QLCNIC_SWITCH_PORT_MIRRORING BIT_4
};
int qlcnic_fw_cmd_query_phy(struct qlcnic_adapter *adapter, u32 reg, u32 *val);
int qlcnic_fw_cmd_set_phy(struct qlcnic_adapter *adapter, u32 reg, u32 val);
u32 qlcnic_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong off);
int qlcnic_hw_write_wx_2M(struct qlcnic_adapter *, ulong off, u32 data);
int qlcnic_pci_mem_write_2M(struct qlcnic_adapter *, u64 off, u64 data);
int qlcnic_pci_mem_read_2M(struct qlcnic_adapter *, u64 off, u64 *data);
void qlcnic_pci_camqm_read_2M(struct qlcnic_adapter *, u64, u64 *);
void qlcnic_pci_camqm_write_2M(struct qlcnic_adapter *, u64, u64);
#define ADDR_IN_RANGE(addr, low, high) \
(((addr) < (high)) && ((addr) >= (low)))
#define QLCRD32(adapter, off) \
(qlcnic_hw_read_wx_2M(adapter, off))
#define QLCWR32(adapter, off, val) \
(qlcnic_hw_write_wx_2M(adapter, off, val))
int qlcnic_pcie_sem_lock(struct qlcnic_adapter *, int, u32);
void qlcnic_pcie_sem_unlock(struct qlcnic_adapter *, int);
#define qlcnic_rom_lock(a) \
qlcnic_pcie_sem_lock((a), 2, QLCNIC_ROM_LOCK_ID)
#define qlcnic_rom_unlock(a) \
qlcnic_pcie_sem_unlock((a), 2)
#define qlcnic_phy_lock(a) \
qlcnic_pcie_sem_lock((a), 3, QLCNIC_PHY_LOCK_ID)
#define qlcnic_phy_unlock(a) \
qlcnic_pcie_sem_unlock((a), 3)
#define qlcnic_api_lock(a) \
qlcnic_pcie_sem_lock((a), 5, 0)
#define qlcnic_api_unlock(a) \
qlcnic_pcie_sem_unlock((a), 5)
#define qlcnic_sw_lock(a) \
qlcnic_pcie_sem_lock((a), 6, 0)
#define qlcnic_sw_unlock(a) \
qlcnic_pcie_sem_unlock((a), 6)
#define crb_win_lock(a) \
qlcnic_pcie_sem_lock((a), 7, QLCNIC_CRB_WIN_LOCK_ID)
#define crb_win_unlock(a) \
qlcnic_pcie_sem_unlock((a), 7)
int qlcnic_get_board_info(struct qlcnic_adapter *adapter);
int qlcnic_wol_supported(struct qlcnic_adapter *adapter);
int qlcnic_config_led(struct qlcnic_adapter *adapter, u32 state, u32 rate);
/* Functions from qlcnic_init.c */
int qlcnic_load_firmware(struct qlcnic_adapter *adapter);
int qlcnic_need_fw_reset(struct qlcnic_adapter *adapter);
void qlcnic_request_firmware(struct qlcnic_adapter *adapter);
void qlcnic_release_firmware(struct qlcnic_adapter *adapter);
int qlcnic_pinit_from_rom(struct qlcnic_adapter *adapter);
int qlcnic_setup_idc_param(struct qlcnic_adapter *adapter);
int qlcnic_check_flash_fw_ver(struct qlcnic_adapter *adapter);
int qlcnic_rom_fast_read(struct qlcnic_adapter *adapter, int addr, int *valp);
int qlcnic_rom_fast_read_words(struct qlcnic_adapter *adapter, int addr,
u8 *bytes, size_t size);
int qlcnic_alloc_sw_resources(struct qlcnic_adapter *adapter);
void qlcnic_free_sw_resources(struct qlcnic_adapter *adapter);
void __iomem *qlcnic_get_ioaddr(struct qlcnic_adapter *, u32);
int qlcnic_alloc_hw_resources(struct qlcnic_adapter *adapter);
void qlcnic_free_hw_resources(struct qlcnic_adapter *adapter);
int qlcnic_fw_create_ctx(struct qlcnic_adapter *adapter);
void qlcnic_fw_destroy_ctx(struct qlcnic_adapter *adapter);
void qlcnic_reset_rx_buffers_list(struct qlcnic_adapter *adapter);
void qlcnic_release_rx_buffers(struct qlcnic_adapter *adapter);
void qlcnic_release_tx_buffers(struct qlcnic_adapter *adapter);
int qlcnic_init_firmware(struct qlcnic_adapter *adapter);
void qlcnic_watchdog_task(struct work_struct *work);
void qlcnic_post_rx_buffers(struct qlcnic_adapter *adapter, u32 ringid,
struct qlcnic_host_rds_ring *rds_ring);
int qlcnic_process_rcv_ring(struct qlcnic_host_sds_ring *sds_ring, int max);
void qlcnic_set_multi(struct net_device *netdev);
void qlcnic_free_mac_list(struct qlcnic_adapter *adapter);
int qlcnic_nic_set_promisc(struct qlcnic_adapter *adapter, u32);
int qlcnic_config_intr_coalesce(struct qlcnic_adapter *adapter);
int qlcnic_config_rss(struct qlcnic_adapter *adapter, int enable);
int qlcnic_config_ipaddr(struct qlcnic_adapter *adapter, u32 ip, int cmd);
int qlcnic_linkevent_request(struct qlcnic_adapter *adapter, int enable);
void qlcnic_advert_link_change(struct qlcnic_adapter *adapter, int linkup);
int qlcnic_fw_cmd_set_mtu(struct qlcnic_adapter *adapter, int mtu);
int qlcnic_change_mtu(struct net_device *netdev, int new_mtu);
int qlcnic_config_hw_lro(struct qlcnic_adapter *adapter, int enable);
int qlcnic_config_bridged_mode(struct qlcnic_adapter *adapter, u32 enable);
int qlcnic_send_lro_cleanup(struct qlcnic_adapter *adapter);
void qlcnic_update_cmd_producer(struct qlcnic_adapter *adapter,
struct qlcnic_host_tx_ring *tx_ring);
int qlcnic_get_mac_addr(struct qlcnic_adapter *adapter, u8 *mac);
void qlcnic_clear_ilb_mode(struct qlcnic_adapter *adapter);
int qlcnic_set_ilb_mode(struct qlcnic_adapter *adapter);
void qlcnic_fetch_mac(struct qlcnic_adapter *, u32, u32, u8, u8 *);
/* Functions from qlcnic_main.c */
int qlcnic_reset_context(struct qlcnic_adapter *);
u32 qlcnic_issue_cmd(struct qlcnic_adapter *adapter,
u32 pci_fn, u32 version, u32 arg1, u32 arg2, u32 arg3, u32 cmd);
void qlcnic_diag_free_res(struct net_device *netdev, int max_sds_rings);
int qlcnic_diag_alloc_res(struct net_device *netdev, int test);
int qlcnic_check_loopback_buff(unsigned char *data);
netdev_tx_t qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
void qlcnic_process_rcv_ring_diag(struct qlcnic_host_sds_ring *sds_ring);
/* Management functions */
int qlcnic_set_mac_address(struct qlcnic_adapter *, u8*);
int qlcnic_get_mac_address(struct qlcnic_adapter *, u8*);
int qlcnic_get_nic_info(struct qlcnic_adapter *, u8);
int qlcnic_set_nic_info(struct qlcnic_adapter *, struct qlcnic_info *);
int qlcnic_get_pci_info(struct qlcnic_adapter *);
int qlcnic_reset_partition(struct qlcnic_adapter *, u8);
/* eSwitch management functions */
int qlcnic_get_eswitch_capabilities(struct qlcnic_adapter *, u8,
struct qlcnic_eswitch *);
int qlcnic_get_eswitch_status(struct qlcnic_adapter *, u8,
struct qlcnic_eswitch *);
int qlcnic_toggle_eswitch(struct qlcnic_adapter *, u8, u8);
int qlcnic_config_switch_port(struct qlcnic_adapter *, u8, int, u8, u8,
u8, u8, u16);
int qlcnic_config_port_mirroring(struct qlcnic_adapter *, u8, u8, u8);
extern int qlcnic_config_tso;
/*
* QLOGIC Board information
*/
#define QLCNIC_MAX_BOARD_NAME_LEN 100
struct qlcnic_brdinfo {
unsigned short vendor;
unsigned short device;
unsigned short sub_vendor;
unsigned short sub_device;
char short_name[QLCNIC_MAX_BOARD_NAME_LEN];
};
static const struct qlcnic_brdinfo qlcnic_boards[] = {
{0x1077, 0x8020, 0x1077, 0x203,
"8200 Series Single Port 10GbE Converged Network Adapter "
"(TCP/IP Networking)"},
{0x1077, 0x8020, 0x1077, 0x207,
"8200 Series Dual Port 10GbE Converged Network Adapter "
"(TCP/IP Networking)"},
{0x1077, 0x8020, 0x1077, 0x20b,
"3200 Series Dual Port 10Gb Intelligent Ethernet Adapter"},
{0x1077, 0x8020, 0x1077, 0x20c,
"3200 Series Quad Port 1Gb Intelligent Ethernet Adapter"},
{0x1077, 0x8020, 0x1077, 0x20f,
"3200 Series Single Port 10Gb Intelligent Ethernet Adapter"},
{0x1077, 0x8020, 0x0, 0x0, "cLOM8214 1/10GbE Controller"},
};
#define NUM_SUPPORTED_BOARDS ARRAY_SIZE(qlcnic_boards)
static inline u32 qlcnic_tx_avail(struct qlcnic_host_tx_ring *tx_ring)
{
smp_mb();
if (tx_ring->producer < tx_ring->sw_consumer)
return tx_ring->sw_consumer - tx_ring->producer;
else
return tx_ring->sw_consumer + tx_ring->num_desc -
tx_ring->producer;
}
extern const struct ethtool_ops qlcnic_ethtool_ops;
struct qlcnic_nic_template {
int (*get_mac_addr) (struct qlcnic_adapter *, u8*);
int (*config_bridged_mode) (struct qlcnic_adapter *, u32);
int (*config_led) (struct qlcnic_adapter *, u32, u32);
int (*set_ilb_mode) (struct qlcnic_adapter *);
void (*clear_ilb_mode) (struct qlcnic_adapter *);
int (*start_firmware) (struct qlcnic_adapter *);
};
#define QLCDB(adapter, lvl, _fmt, _args...) do { \
if (NETIF_MSG_##lvl & adapter->msg_enable) \
printk(KERN_INFO "%s: %s: " _fmt, \
dev_name(&adapter->pdev->dev), \
__func__, ##_args); \
} while (0)
#endif /* __QLCNIC_H_ */