linux/arch/arm/configs/kzm9d_defconfig
Olof Johansson acdcbd6331 Renesas ARM based SoC board updates for v3.14
* Global
   - Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile
 
 * r7s72100 SoC (RZ/A1H) based Genmai Board
   - Add Multiplatform support
   - Add Reference DT
 
 * r8a7791 (R-Car M2) based Koelsch board
   - Add pinctrl_register_mappings() for Koelsch
   - Hook up SW30-SW36 on Koelsch
   - Mark GPIO keys as wake-up sources
   - Use ->init_late()
   - Add Multiplatform support
   - Set .debounce_interval for GPIO keys
   - Add SW2 to GPIO keys
   - Add Led 6, 7 and 8 support
   - Add reference DT
   - Enable PFC/GPIO
 
 * r8a7790 (R-Car H2) based Lager board
   - Add gpio/fixed regulator for SDHI
   - Add SPI FLASH support on QSPI
   - Mark GPIO keys as wake-up sources
   - Use ->init_late()
   - Set .debounce_interval for GPIO keys
 
 * r8a7778 (R-Car M1) based Bock-W board
   - bockw: remove unused RSND_SSI_CLK_FROM_ADG
   - Set .debounce_interval for GPIO keys
   - Correct FPGA ioremap area
   - Use regulator for MMCIF
 
 * r8a7740 (R-Mobile A1) based Armadillo board
   - Correct FSI address size
 
 * sh7374 (SH-Mobile AP4) based Mackerel board
   - Use pinconf API to configure pin pull-down
   - clk_round_rate() can return a zero to indicate an error
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSt5cHAAoJENfPZGlqN0++xIoP/jBunLyY+xAZ+06gukAdKEw4
 hLoUH55GsvpaL5cuDT+LSXWafIol4A/wvME5sZJsKoCHRnDqQYKvyE7hDLIlvLRI
 KvcmFvdUcN6plbD/wz/SPzur/Lq3+DcX4ep8pmI7OUXupYWomibwylv/5UgY++PN
 Uymmre4CiHK7/wzWOyS79ujcGzdwk4o1ari5P2lC4fUlVM7jZ7DQswglo+jGxscw
 CXHtEfqto4NEh2+05sAGdmRHwb3xwOndPYwHaFWy+X6uce/BZXsgDipWihHI5ZKr
 FT+TemFlYwXc2In2F/E4T7aXqNDXSjEcX/x2/VHS5W2EoWbSk+Mz6zlFZduAv4oG
 c35AQjHMktlo6voZm0L4WgH0JYT4dyu6DJG3mo7adRyYKvjv/OC48wt4jhYa0LGZ
 XLcYBoaK1zqpG2M6ZIv138a9krGtkfSCy/Pt7YQ4WpA8CQyJlYqaoW9Yrpkhw13b
 OcO22myGbjMnxTwpqS9rwDPnNR2PjG9ExDHmO3x4k+zsLqyJHxzv6ikKJWl0eiUF
 JUv/mzxiaYsOBiMTYYuueNYegzhzGiW8jzp+j6E3WXTPxwCP2It8/31aBfyuaKcG
 B807//VKcHulPONe3emBK7I2KzsJ6UOUs7iHuqrdwoglQKqMC0iyy2/ZFXbu7JJU
 cMlHObCNFOGPZxKGsYXG
 =5zhn
 -----END PGP SIGNATURE-----

Merge tag 'renesas-boards-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

From Simon Horman:
Renesas ARM based SoC board updates for v3.14

* Global
  - Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile

* r7s72100 SoC (RZ/A1H) based Genmai Board
  - Add Multiplatform support
  - Add Reference DT

* r8a7791 (R-Car M2) based Koelsch board
  - Add pinctrl_register_mappings() for Koelsch
  - Hook up SW30-SW36 on Koelsch
  - Mark GPIO keys as wake-up sources
  - Use ->init_late()
  - Add Multiplatform support
  - Set .debounce_interval for GPIO keys
  - Add SW2 to GPIO keys
  - Add Led 6, 7 and 8 support
  - Add reference DT
  - Enable PFC/GPIO

* r8a7790 (R-Car H2) based Lager board
  - Add gpio/fixed regulator for SDHI
  - Add SPI FLASH support on QSPI
  - Mark GPIO keys as wake-up sources
  - Use ->init_late()
  - Set .debounce_interval for GPIO keys

* r8a7778 (R-Car M1) based Bock-W board
  - bockw: remove unused RSND_SSI_CLK_FROM_ADG
  - Set .debounce_interval for GPIO keys
  - Correct FPGA ioremap area
  - Use regulator for MMCIF

* r8a7740 (R-Mobile A1) based Armadillo board
  - Correct FSI address size

* sh7374 (SH-Mobile AP4) based Mackerel board
  - Use pinconf API to configure pin pull-down
  - clk_round_rate() can return a zero to indicate an error

* tag 'renesas-boards-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (75 commits)
  ARM: shmobile: lager: add gpio/fixed regulator for SDHI
  ARM: shmobile: bockw: remove unused RSND_SSI_CLK_FROM_ADG
  ARM: shmobile: armadillo: fixup FSI address size
  ARM: Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile
  ARM: shmobile: mackerel: Use pinconf API to configure pin pull-down
  ARM: shmobile: Lager:add SPI FLASH support on QSPI
  ARM: shmobile: mackerel: clk_round_rate() can return a zero to indicate an error
  ARM: shmobile: Add pinctrl_register_mappings() for Koelsch
  ARM: shmobile: Use ->init_late() on Lager
  ARM: shmobile: Hook up SW30-SW36 on Koelsch
  ARM: shmobile: koelsch: mark GPIO keys as wake-up sources
  ARM: shmobile: Use ->init_late() on Koelsch
  ARM: shmobile: lager: mark GPIO keys as wake-up sources
  ARM: shmobile: r7s72100 Genmai Multiplatform
  ARM: shmobile: r7s72100 Genmai DT reference C bits
  ARM: shmobile: r7s72100 Genmai DT reference DTS bits
  ARM: shmobile: Initial r8a7791 and Koelsch multiplatform support
  ARM: shmobile: koelsch: set .debounce_interval
  ARM: shmobile: lager: set .debounce_interval
  ARM: shmobile: bockw: add pin pull-up setting for SDHI
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-29 13:15:03 -08:00

90 lines
2.4 KiB
Plaintext

# CONFIG_ARM_PATCH_PHYS_VIRT is not set
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
CONFIG_SLAB=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_SHMOBILE_LEGACY=y
CONFIG_ARCH_EMEV2=y
CONFIG_MACH_KZM9D=y
CONFIG_MEMORY_START=0x40000000
CONFIG_MEMORY_SIZE=0x10000000
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_SWP_EMULATE is not set
# CONFIG_CACHE_L2X0 is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_HOTPLUG_CPU=y
# CONFIG_LOCAL_TIMERS is not set
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_BLK_DEV is not set
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_SMSC911X=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_EM=y
# CONFIG_HW_RANDOM is not set
CONFIG_GPIOLIB=y
CONFIG_GPIO_EM=y
# CONFIG_HWMON is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
# CONFIG_FTRACE is not set