mirror of
https://github.com/torvalds/linux.git
synced 2024-11-26 14:12:06 +00:00
952a11ca32
We have bool so use it consistently in all the drivers. The following Coccinelle script was used: @@ identifier T; type t = { char, int }; @@ struct T { ... - t valid; + bool valid; ... } @@ identifier v; @@ ( - v->valid = 0 + v->valid = false | - v->valid = 1 + v->valid = true ) followed by sed to fixup the comments: sed '/bool valid;/{s/!=0/true/;s/zero/false/}' Few whitespace changes were fixed manually. All modified drivers were compile-tested. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Link: https://lore.kernel.org/r/20210924195202.27917-1-fercerpav@gmail.com [groeck: Fixed up 'u8 valid' to 'boool valid' in atxp1.c] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
1065 lines
30 KiB
C
1065 lines
30 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* vt8231.c - Part of lm_sensors, Linux kernel modules
|
|
* for hardware monitoring
|
|
*
|
|
* Copyright (c) 2005 Roger Lucas <vt8231@hiddenengine.co.uk>
|
|
* Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
|
|
* Aaron M. Marsh <amarsh@sdf.lonestar.org>
|
|
*/
|
|
|
|
/*
|
|
* Supports VIA VT8231 South Bridge embedded sensors
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/hwmon-vid.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/io.h>
|
|
|
|
static int force_addr;
|
|
module_param(force_addr, int, 0);
|
|
MODULE_PARM_DESC(force_addr, "Initialize the base address of the sensors");
|
|
|
|
static struct platform_device *pdev;
|
|
|
|
#define VT8231_EXTENT 0x80
|
|
#define VT8231_BASE_REG 0x70
|
|
#define VT8231_ENABLE_REG 0x74
|
|
|
|
/*
|
|
* The VT8231 registers
|
|
*
|
|
* The reset value for the input channel configuration is used (Reg 0x4A=0x07)
|
|
* which sets the selected inputs marked with '*' below if multiple options are
|
|
* possible:
|
|
*
|
|
* Voltage Mode Temperature Mode
|
|
* Sensor Linux Id Linux Id VIA Id
|
|
* -------- -------- -------- ------
|
|
* CPU Diode N/A temp1 0
|
|
* UIC1 in0 temp2 * 1
|
|
* UIC2 in1 * temp3 2
|
|
* UIC3 in2 * temp4 3
|
|
* UIC4 in3 * temp5 4
|
|
* UIC5 in4 * temp6 5
|
|
* 3.3V in5 N/A
|
|
*
|
|
* Note that the BIOS may set the configuration register to a different value
|
|
* to match the motherboard configuration.
|
|
*/
|
|
|
|
/* fans numbered 0-1 */
|
|
#define VT8231_REG_FAN_MIN(nr) (0x3b + (nr))
|
|
#define VT8231_REG_FAN(nr) (0x29 + (nr))
|
|
|
|
/* Voltage inputs numbered 0-5 */
|
|
|
|
static const u8 regvolt[] = { 0x21, 0x22, 0x23, 0x24, 0x25, 0x26 };
|
|
static const u8 regvoltmax[] = { 0x3d, 0x2b, 0x2d, 0x2f, 0x31, 0x33 };
|
|
static const u8 regvoltmin[] = { 0x3e, 0x2c, 0x2e, 0x30, 0x32, 0x34 };
|
|
|
|
/*
|
|
* Temperatures are numbered 1-6 according to the Linux kernel specification.
|
|
*
|
|
* In the VIA datasheet, however, the temperatures are numbered from zero.
|
|
* Since it is important that this driver can easily be compared to the VIA
|
|
* datasheet, we will use the VIA numbering within this driver and map the
|
|
* kernel sysfs device name to the VIA number in the sysfs callback.
|
|
*/
|
|
|
|
#define VT8231_REG_TEMP_LOW01 0x49
|
|
#define VT8231_REG_TEMP_LOW25 0x4d
|
|
|
|
static const u8 regtemp[] = { 0x1f, 0x21, 0x22, 0x23, 0x24, 0x25 };
|
|
static const u8 regtempmax[] = { 0x39, 0x3d, 0x2b, 0x2d, 0x2f, 0x31 };
|
|
static const u8 regtempmin[] = { 0x3a, 0x3e, 0x2c, 0x2e, 0x30, 0x32 };
|
|
|
|
#define TEMP_FROM_REG(reg) (((253 * 4 - (reg)) * 550 + 105) / 210)
|
|
#define TEMP_MAXMIN_FROM_REG(reg) (((253 - (reg)) * 2200 + 105) / 210)
|
|
#define TEMP_MAXMIN_TO_REG(val) (253 - ((val) * 210 + 1100) / 2200)
|
|
|
|
#define VT8231_REG_CONFIG 0x40
|
|
#define VT8231_REG_ALARM1 0x41
|
|
#define VT8231_REG_ALARM2 0x42
|
|
#define VT8231_REG_FANDIV 0x47
|
|
#define VT8231_REG_UCH_CONFIG 0x4a
|
|
#define VT8231_REG_TEMP1_CONFIG 0x4b
|
|
#define VT8231_REG_TEMP2_CONFIG 0x4c
|
|
|
|
/*
|
|
* temps 0-5 as numbered in VIA datasheet - see later for mapping to Linux
|
|
* numbering
|
|
*/
|
|
#define ISTEMP(i, ch_config) ((i) == 0 ? 1 : \
|
|
((ch_config) >> ((i)+1)) & 0x01)
|
|
/* voltages 0-5 */
|
|
#define ISVOLT(i, ch_config) ((i) == 5 ? 1 : \
|
|
!(((ch_config) >> ((i)+2)) & 0x01))
|
|
|
|
#define DIV_FROM_REG(val) (1 << (val))
|
|
|
|
/*
|
|
* NB The values returned here are NOT temperatures. The calibration curves
|
|
* for the thermistor curves are board-specific and must go in the
|
|
* sensors.conf file. Temperature sensors are actually ten bits, but the
|
|
* VIA datasheet only considers the 8 MSBs obtained from the regtemp[]
|
|
* register. The temperature value returned should have a magnitude of 3,
|
|
* so we use the VIA scaling as the "true" scaling and use the remaining 2
|
|
* LSBs as fractional precision.
|
|
*
|
|
* All the on-chip hardware temperature comparisons for the alarms are only
|
|
* 8-bits wide, and compare against the 8 MSBs of the temperature. The bits
|
|
* in the registers VT8231_REG_TEMP_LOW01 and VT8231_REG_TEMP_LOW25 are
|
|
* ignored.
|
|
*/
|
|
|
|
/*
|
|
****** FAN RPM CONVERSIONS ********
|
|
* This chip saturates back at 0, not at 255 like many the other chips.
|
|
* So, 0 means 0 RPM
|
|
*/
|
|
static inline u8 FAN_TO_REG(long rpm, int div)
|
|
{
|
|
if (rpm <= 0 || rpm > 1310720)
|
|
return 0;
|
|
return clamp_val(1310720 / (rpm * div), 1, 255);
|
|
}
|
|
|
|
#define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : 1310720 / ((val) * (div)))
|
|
|
|
struct vt8231_data {
|
|
unsigned short addr;
|
|
const char *name;
|
|
|
|
struct mutex update_lock;
|
|
struct device *hwmon_dev;
|
|
bool valid; /* true if following fields are valid */
|
|
unsigned long last_updated; /* In jiffies */
|
|
|
|
u8 in[6]; /* Register value */
|
|
u8 in_max[6]; /* Register value */
|
|
u8 in_min[6]; /* Register value */
|
|
u16 temp[6]; /* Register value 10 bit, right aligned */
|
|
u8 temp_max[6]; /* Register value */
|
|
u8 temp_min[6]; /* Register value */
|
|
u8 fan[2]; /* Register value */
|
|
u8 fan_min[2]; /* Register value */
|
|
u8 fan_div[2]; /* Register encoding, shifted right */
|
|
u16 alarms; /* Register encoding */
|
|
u8 uch_config;
|
|
};
|
|
|
|
static struct pci_dev *s_bridge;
|
|
static int vt8231_probe(struct platform_device *pdev);
|
|
static int vt8231_remove(struct platform_device *pdev);
|
|
static struct vt8231_data *vt8231_update_device(struct device *dev);
|
|
static void vt8231_init_device(struct vt8231_data *data);
|
|
|
|
static inline int vt8231_read_value(struct vt8231_data *data, u8 reg)
|
|
{
|
|
return inb_p(data->addr + reg);
|
|
}
|
|
|
|
static inline void vt8231_write_value(struct vt8231_data *data, u8 reg,
|
|
u8 value)
|
|
{
|
|
outb_p(value, data->addr + reg);
|
|
}
|
|
|
|
/* following are the sysfs callback functions */
|
|
static ssize_t in_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
|
|
int nr = sensor_attr->index;
|
|
struct vt8231_data *data = vt8231_update_device(dev);
|
|
|
|
return sprintf(buf, "%d\n", ((data->in[nr] - 3) * 10000) / 958);
|
|
}
|
|
|
|
static ssize_t in_min_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
|
|
int nr = sensor_attr->index;
|
|
struct vt8231_data *data = vt8231_update_device(dev);
|
|
|
|
return sprintf(buf, "%d\n", ((data->in_min[nr] - 3) * 10000) / 958);
|
|
}
|
|
|
|
static ssize_t in_max_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
|
|
int nr = sensor_attr->index;
|
|
struct vt8231_data *data = vt8231_update_device(dev);
|
|
|
|
return sprintf(buf, "%d\n", (((data->in_max[nr] - 3) * 10000) / 958));
|
|
}
|
|
|
|
static ssize_t in_min_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
|
|
int nr = sensor_attr->index;
|
|
struct vt8231_data *data = dev_get_drvdata(dev);
|
|
unsigned long val;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->in_min[nr] = clamp_val(((val * 958) / 10000) + 3, 0, 255);
|
|
vt8231_write_value(data, regvoltmin[nr], data->in_min[nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t in_max_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
|
|
int nr = sensor_attr->index;
|
|
struct vt8231_data *data = dev_get_drvdata(dev);
|
|
unsigned long val;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->in_max[nr] = clamp_val(((val * 958) / 10000) + 3, 0, 255);
|
|
vt8231_write_value(data, regvoltmax[nr], data->in_max[nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
/* Special case for input 5 as this has 3.3V scaling built into the chip */
|
|
static ssize_t in5_input_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct vt8231_data *data = vt8231_update_device(dev);
|
|
|
|
return sprintf(buf, "%d\n",
|
|
(((data->in[5] - 3) * 10000 * 54) / (958 * 34)));
|
|
}
|
|
|
|
static ssize_t in5_min_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct vt8231_data *data = vt8231_update_device(dev);
|
|
|
|
return sprintf(buf, "%d\n",
|
|
(((data->in_min[5] - 3) * 10000 * 54) / (958 * 34)));
|
|
}
|
|
|
|
static ssize_t in5_max_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct vt8231_data *data = vt8231_update_device(dev);
|
|
|
|
return sprintf(buf, "%d\n",
|
|
(((data->in_max[5] - 3) * 10000 * 54) / (958 * 34)));
|
|
}
|
|
|
|
static ssize_t in5_min_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct vt8231_data *data = dev_get_drvdata(dev);
|
|
unsigned long val;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->in_min[5] = clamp_val(((val * 958 * 34) / (10000 * 54)) + 3,
|
|
0, 255);
|
|
vt8231_write_value(data, regvoltmin[5], data->in_min[5]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t in5_max_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct vt8231_data *data = dev_get_drvdata(dev);
|
|
unsigned long val;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->in_max[5] = clamp_val(((val * 958 * 34) / (10000 * 54)) + 3,
|
|
0, 255);
|
|
vt8231_write_value(data, regvoltmax[5], data->in_max[5]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR_RO(in0_input, in, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(in0_min, in_min, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(in0_max, in_max, 0);
|
|
static SENSOR_DEVICE_ATTR_RO(in1_input, in, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(in1_min, in_min, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(in1_max, in_max, 1);
|
|
static SENSOR_DEVICE_ATTR_RO(in2_input, in, 2);
|
|
static SENSOR_DEVICE_ATTR_RW(in2_min, in_min, 2);
|
|
static SENSOR_DEVICE_ATTR_RW(in2_max, in_max, 2);
|
|
static SENSOR_DEVICE_ATTR_RO(in3_input, in, 3);
|
|
static SENSOR_DEVICE_ATTR_RW(in3_min, in_min, 3);
|
|
static SENSOR_DEVICE_ATTR_RW(in3_max, in_max, 3);
|
|
static SENSOR_DEVICE_ATTR_RO(in4_input, in, 4);
|
|
static SENSOR_DEVICE_ATTR_RW(in4_min, in_min, 4);
|
|
static SENSOR_DEVICE_ATTR_RW(in4_max, in_max, 4);
|
|
|
|
static DEVICE_ATTR_RO(in5_input);
|
|
static DEVICE_ATTR_RW(in5_min);
|
|
static DEVICE_ATTR_RW(in5_max);
|
|
|
|
/* Temperatures */
|
|
static ssize_t temp1_input_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct vt8231_data *data = vt8231_update_device(dev);
|
|
return sprintf(buf, "%d\n", data->temp[0] * 250);
|
|
}
|
|
|
|
static ssize_t temp1_max_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct vt8231_data *data = vt8231_update_device(dev);
|
|
return sprintf(buf, "%d\n", data->temp_max[0] * 1000);
|
|
}
|
|
|
|
static ssize_t temp1_max_hyst_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct vt8231_data *data = vt8231_update_device(dev);
|
|
return sprintf(buf, "%d\n", data->temp_min[0] * 1000);
|
|
}
|
|
|
|
static ssize_t temp1_max_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct vt8231_data *data = dev_get_drvdata(dev);
|
|
long val;
|
|
int err;
|
|
|
|
err = kstrtol(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->temp_max[0] = clamp_val((val + 500) / 1000, 0, 255);
|
|
vt8231_write_value(data, regtempmax[0], data->temp_max[0]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
static ssize_t temp1_max_hyst_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct vt8231_data *data = dev_get_drvdata(dev);
|
|
long val;
|
|
int err;
|
|
|
|
err = kstrtol(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->temp_min[0] = clamp_val((val + 500) / 1000, 0, 255);
|
|
vt8231_write_value(data, regtempmin[0], data->temp_min[0]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t temp_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
|
|
int nr = sensor_attr->index;
|
|
struct vt8231_data *data = vt8231_update_device(dev);
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr]));
|
|
}
|
|
|
|
static ssize_t temp_max_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
|
|
int nr = sensor_attr->index;
|
|
struct vt8231_data *data = vt8231_update_device(dev);
|
|
return sprintf(buf, "%d\n", TEMP_MAXMIN_FROM_REG(data->temp_max[nr]));
|
|
}
|
|
|
|
static ssize_t temp_min_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
|
|
int nr = sensor_attr->index;
|
|
struct vt8231_data *data = vt8231_update_device(dev);
|
|
return sprintf(buf, "%d\n", TEMP_MAXMIN_FROM_REG(data->temp_min[nr]));
|
|
}
|
|
|
|
static ssize_t temp_max_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
|
|
int nr = sensor_attr->index;
|
|
struct vt8231_data *data = dev_get_drvdata(dev);
|
|
long val;
|
|
int err;
|
|
|
|
err = kstrtol(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->temp_max[nr] = clamp_val(TEMP_MAXMIN_TO_REG(val), 0, 255);
|
|
vt8231_write_value(data, regtempmax[nr], data->temp_max[nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
static ssize_t temp_min_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
|
|
int nr = sensor_attr->index;
|
|
struct vt8231_data *data = dev_get_drvdata(dev);
|
|
long val;
|
|
int err;
|
|
|
|
err = kstrtol(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->temp_min[nr] = clamp_val(TEMP_MAXMIN_TO_REG(val), 0, 255);
|
|
vt8231_write_value(data, regtempmin[nr], data->temp_min[nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
/*
|
|
* Note that these map the Linux temperature sensor numbering (1-6) to the VIA
|
|
* temperature sensor numbering (0-5)
|
|
*/
|
|
|
|
static DEVICE_ATTR_RO(temp1_input);
|
|
static DEVICE_ATTR_RW(temp1_max);
|
|
static DEVICE_ATTR_RW(temp1_max_hyst);
|
|
|
|
static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(temp2_max_hyst, temp_min, 1);
|
|
static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2);
|
|
static SENSOR_DEVICE_ATTR_RW(temp3_max, temp_max, 2);
|
|
static SENSOR_DEVICE_ATTR_RW(temp3_max_hyst, temp_min, 2);
|
|
static SENSOR_DEVICE_ATTR_RO(temp4_input, temp, 3);
|
|
static SENSOR_DEVICE_ATTR_RW(temp4_max, temp_max, 3);
|
|
static SENSOR_DEVICE_ATTR_RW(temp4_max_hyst, temp_min, 3);
|
|
static SENSOR_DEVICE_ATTR_RO(temp5_input, temp, 4);
|
|
static SENSOR_DEVICE_ATTR_RW(temp5_max, temp_max, 4);
|
|
static SENSOR_DEVICE_ATTR_RW(temp5_max_hyst, temp_min, 4);
|
|
static SENSOR_DEVICE_ATTR_RO(temp6_input, temp, 5);
|
|
static SENSOR_DEVICE_ATTR_RW(temp6_max, temp_max, 5);
|
|
static SENSOR_DEVICE_ATTR_RW(temp6_max_hyst, temp_min, 5);
|
|
|
|
/* Fans */
|
|
static ssize_t fan_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
|
|
int nr = sensor_attr->index;
|
|
struct vt8231_data *data = vt8231_update_device(dev);
|
|
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
|
|
DIV_FROM_REG(data->fan_div[nr])));
|
|
}
|
|
|
|
static ssize_t fan_min_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
|
|
int nr = sensor_attr->index;
|
|
struct vt8231_data *data = vt8231_update_device(dev);
|
|
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
|
|
DIV_FROM_REG(data->fan_div[nr])));
|
|
}
|
|
|
|
static ssize_t fan_div_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
|
|
int nr = sensor_attr->index;
|
|
struct vt8231_data *data = vt8231_update_device(dev);
|
|
return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
|
|
}
|
|
|
|
static ssize_t fan_min_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
|
|
int nr = sensor_attr->index;
|
|
struct vt8231_data *data = dev_get_drvdata(dev);
|
|
unsigned long val;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
|
|
vt8231_write_value(data, VT8231_REG_FAN_MIN(nr), data->fan_min[nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t fan_div_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct vt8231_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
|
|
unsigned long val;
|
|
int nr = sensor_attr->index;
|
|
int old = vt8231_read_value(data, VT8231_REG_FANDIV);
|
|
long min = FAN_FROM_REG(data->fan_min[nr],
|
|
DIV_FROM_REG(data->fan_div[nr]));
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
switch (val) {
|
|
case 1:
|
|
data->fan_div[nr] = 0;
|
|
break;
|
|
case 2:
|
|
data->fan_div[nr] = 1;
|
|
break;
|
|
case 4:
|
|
data->fan_div[nr] = 2;
|
|
break;
|
|
case 8:
|
|
data->fan_div[nr] = 3;
|
|
break;
|
|
default:
|
|
dev_err(dev,
|
|
"fan_div value %ld not supported. Choose one of 1, 2, 4 or 8!\n",
|
|
val);
|
|
mutex_unlock(&data->update_lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Correct the fan minimum speed */
|
|
data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
|
|
vt8231_write_value(data, VT8231_REG_FAN_MIN(nr), data->fan_min[nr]);
|
|
|
|
old = (old & 0x0f) | (data->fan_div[1] << 6) | (data->fan_div[0] << 4);
|
|
vt8231_write_value(data, VT8231_REG_FANDIV, old);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0);
|
|
static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1);
|
|
|
|
/* Alarms */
|
|
static ssize_t alarms_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct vt8231_data *data = vt8231_update_device(dev);
|
|
return sprintf(buf, "%d\n", data->alarms);
|
|
}
|
|
static DEVICE_ATTR_RO(alarms);
|
|
|
|
static ssize_t alarm_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int bitnr = to_sensor_dev_attr(attr)->index;
|
|
struct vt8231_data *data = vt8231_update_device(dev);
|
|
return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
|
|
}
|
|
static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 4);
|
|
static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm, 11);
|
|
static SENSOR_DEVICE_ATTR_RO(temp3_alarm, alarm, 0);
|
|
static SENSOR_DEVICE_ATTR_RO(temp4_alarm, alarm, 1);
|
|
static SENSOR_DEVICE_ATTR_RO(temp5_alarm, alarm, 3);
|
|
static SENSOR_DEVICE_ATTR_RO(temp6_alarm, alarm, 8);
|
|
static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 11);
|
|
static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 0);
|
|
static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 1);
|
|
static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3);
|
|
static SENSOR_DEVICE_ATTR_RO(in4_alarm, alarm, 8);
|
|
static SENSOR_DEVICE_ATTR_RO(in5_alarm, alarm, 2);
|
|
static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 6);
|
|
static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 7);
|
|
|
|
static ssize_t name_show(struct device *dev, struct device_attribute
|
|
*devattr, char *buf)
|
|
{
|
|
struct vt8231_data *data = dev_get_drvdata(dev);
|
|
return sprintf(buf, "%s\n", data->name);
|
|
}
|
|
static DEVICE_ATTR_RO(name);
|
|
|
|
static struct attribute *vt8231_attributes_temps[6][5] = {
|
|
{
|
|
&dev_attr_temp1_input.attr,
|
|
&dev_attr_temp1_max_hyst.attr,
|
|
&dev_attr_temp1_max.attr,
|
|
&sensor_dev_attr_temp1_alarm.dev_attr.attr,
|
|
NULL
|
|
}, {
|
|
&sensor_dev_attr_temp2_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_alarm.dev_attr.attr,
|
|
NULL
|
|
}, {
|
|
&sensor_dev_attr_temp3_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_alarm.dev_attr.attr,
|
|
NULL
|
|
}, {
|
|
&sensor_dev_attr_temp4_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp4_max_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_temp4_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp4_alarm.dev_attr.attr,
|
|
NULL
|
|
}, {
|
|
&sensor_dev_attr_temp5_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp5_max_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_temp5_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp5_alarm.dev_attr.attr,
|
|
NULL
|
|
}, {
|
|
&sensor_dev_attr_temp6_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp6_max_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_temp6_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp6_alarm.dev_attr.attr,
|
|
NULL
|
|
}
|
|
};
|
|
|
|
static const struct attribute_group vt8231_group_temps[6] = {
|
|
{ .attrs = vt8231_attributes_temps[0] },
|
|
{ .attrs = vt8231_attributes_temps[1] },
|
|
{ .attrs = vt8231_attributes_temps[2] },
|
|
{ .attrs = vt8231_attributes_temps[3] },
|
|
{ .attrs = vt8231_attributes_temps[4] },
|
|
{ .attrs = vt8231_attributes_temps[5] },
|
|
};
|
|
|
|
static struct attribute *vt8231_attributes_volts[6][5] = {
|
|
{
|
|
&sensor_dev_attr_in0_input.dev_attr.attr,
|
|
&sensor_dev_attr_in0_min.dev_attr.attr,
|
|
&sensor_dev_attr_in0_max.dev_attr.attr,
|
|
&sensor_dev_attr_in0_alarm.dev_attr.attr,
|
|
NULL
|
|
}, {
|
|
&sensor_dev_attr_in1_input.dev_attr.attr,
|
|
&sensor_dev_attr_in1_min.dev_attr.attr,
|
|
&sensor_dev_attr_in1_max.dev_attr.attr,
|
|
&sensor_dev_attr_in1_alarm.dev_attr.attr,
|
|
NULL
|
|
}, {
|
|
&sensor_dev_attr_in2_input.dev_attr.attr,
|
|
&sensor_dev_attr_in2_min.dev_attr.attr,
|
|
&sensor_dev_attr_in2_max.dev_attr.attr,
|
|
&sensor_dev_attr_in2_alarm.dev_attr.attr,
|
|
NULL
|
|
}, {
|
|
&sensor_dev_attr_in3_input.dev_attr.attr,
|
|
&sensor_dev_attr_in3_min.dev_attr.attr,
|
|
&sensor_dev_attr_in3_max.dev_attr.attr,
|
|
&sensor_dev_attr_in3_alarm.dev_attr.attr,
|
|
NULL
|
|
}, {
|
|
&sensor_dev_attr_in4_input.dev_attr.attr,
|
|
&sensor_dev_attr_in4_min.dev_attr.attr,
|
|
&sensor_dev_attr_in4_max.dev_attr.attr,
|
|
&sensor_dev_attr_in4_alarm.dev_attr.attr,
|
|
NULL
|
|
}, {
|
|
&dev_attr_in5_input.attr,
|
|
&dev_attr_in5_min.attr,
|
|
&dev_attr_in5_max.attr,
|
|
&sensor_dev_attr_in5_alarm.dev_attr.attr,
|
|
NULL
|
|
}
|
|
};
|
|
|
|
static const struct attribute_group vt8231_group_volts[6] = {
|
|
{ .attrs = vt8231_attributes_volts[0] },
|
|
{ .attrs = vt8231_attributes_volts[1] },
|
|
{ .attrs = vt8231_attributes_volts[2] },
|
|
{ .attrs = vt8231_attributes_volts[3] },
|
|
{ .attrs = vt8231_attributes_volts[4] },
|
|
{ .attrs = vt8231_attributes_volts[5] },
|
|
};
|
|
|
|
static struct attribute *vt8231_attributes[] = {
|
|
&sensor_dev_attr_fan1_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan1_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan1_div.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_div.dev_attr.attr,
|
|
&sensor_dev_attr_fan1_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_alarm.dev_attr.attr,
|
|
&dev_attr_alarms.attr,
|
|
&dev_attr_name.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group vt8231_group = {
|
|
.attrs = vt8231_attributes,
|
|
};
|
|
|
|
static struct platform_driver vt8231_driver = {
|
|
.driver = {
|
|
.name = "vt8231",
|
|
},
|
|
.probe = vt8231_probe,
|
|
.remove = vt8231_remove,
|
|
};
|
|
|
|
static const struct pci_device_id vt8231_pci_ids[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4) },
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, vt8231_pci_ids);
|
|
|
|
static int vt8231_pci_probe(struct pci_dev *dev,
|
|
const struct pci_device_id *id);
|
|
|
|
static struct pci_driver vt8231_pci_driver = {
|
|
.name = "vt8231",
|
|
.id_table = vt8231_pci_ids,
|
|
.probe = vt8231_pci_probe,
|
|
};
|
|
|
|
static int vt8231_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
struct vt8231_data *data;
|
|
int err = 0, i;
|
|
|
|
/* Reserve the ISA region */
|
|
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
if (!devm_request_region(&pdev->dev, res->start, VT8231_EXTENT,
|
|
vt8231_driver.driver.name)) {
|
|
dev_err(&pdev->dev, "Region 0x%lx-0x%lx already in use!\n",
|
|
(unsigned long)res->start, (unsigned long)res->end);
|
|
return -ENODEV;
|
|
}
|
|
|
|
data = devm_kzalloc(&pdev->dev, sizeof(struct vt8231_data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, data);
|
|
data->addr = res->start;
|
|
data->name = "vt8231";
|
|
|
|
mutex_init(&data->update_lock);
|
|
vt8231_init_device(data);
|
|
|
|
/* Register sysfs hooks */
|
|
err = sysfs_create_group(&pdev->dev.kobj, &vt8231_group);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Must update device information to find out the config field */
|
|
data->uch_config = vt8231_read_value(data, VT8231_REG_UCH_CONFIG);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(vt8231_group_temps); i++) {
|
|
if (ISTEMP(i, data->uch_config)) {
|
|
err = sysfs_create_group(&pdev->dev.kobj,
|
|
&vt8231_group_temps[i]);
|
|
if (err)
|
|
goto exit_remove_files;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(vt8231_group_volts); i++) {
|
|
if (ISVOLT(i, data->uch_config)) {
|
|
err = sysfs_create_group(&pdev->dev.kobj,
|
|
&vt8231_group_volts[i]);
|
|
if (err)
|
|
goto exit_remove_files;
|
|
}
|
|
}
|
|
|
|
data->hwmon_dev = hwmon_device_register(&pdev->dev);
|
|
if (IS_ERR(data->hwmon_dev)) {
|
|
err = PTR_ERR(data->hwmon_dev);
|
|
goto exit_remove_files;
|
|
}
|
|
return 0;
|
|
|
|
exit_remove_files:
|
|
for (i = 0; i < ARRAY_SIZE(vt8231_group_volts); i++)
|
|
sysfs_remove_group(&pdev->dev.kobj, &vt8231_group_volts[i]);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(vt8231_group_temps); i++)
|
|
sysfs_remove_group(&pdev->dev.kobj, &vt8231_group_temps[i]);
|
|
|
|
sysfs_remove_group(&pdev->dev.kobj, &vt8231_group);
|
|
return err;
|
|
}
|
|
|
|
static int vt8231_remove(struct platform_device *pdev)
|
|
{
|
|
struct vt8231_data *data = platform_get_drvdata(pdev);
|
|
int i;
|
|
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(vt8231_group_volts); i++)
|
|
sysfs_remove_group(&pdev->dev.kobj, &vt8231_group_volts[i]);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(vt8231_group_temps); i++)
|
|
sysfs_remove_group(&pdev->dev.kobj, &vt8231_group_temps[i]);
|
|
|
|
sysfs_remove_group(&pdev->dev.kobj, &vt8231_group);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void vt8231_init_device(struct vt8231_data *data)
|
|
{
|
|
vt8231_write_value(data, VT8231_REG_TEMP1_CONFIG, 0);
|
|
vt8231_write_value(data, VT8231_REG_TEMP2_CONFIG, 0);
|
|
}
|
|
|
|
static struct vt8231_data *vt8231_update_device(struct device *dev)
|
|
{
|
|
struct vt8231_data *data = dev_get_drvdata(dev);
|
|
int i;
|
|
u16 low;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|
|
|| !data->valid) {
|
|
for (i = 0; i < 6; i++) {
|
|
if (ISVOLT(i, data->uch_config)) {
|
|
data->in[i] = vt8231_read_value(data,
|
|
regvolt[i]);
|
|
data->in_min[i] = vt8231_read_value(data,
|
|
regvoltmin[i]);
|
|
data->in_max[i] = vt8231_read_value(data,
|
|
regvoltmax[i]);
|
|
}
|
|
}
|
|
for (i = 0; i < 2; i++) {
|
|
data->fan[i] = vt8231_read_value(data,
|
|
VT8231_REG_FAN(i));
|
|
data->fan_min[i] = vt8231_read_value(data,
|
|
VT8231_REG_FAN_MIN(i));
|
|
}
|
|
|
|
low = vt8231_read_value(data, VT8231_REG_TEMP_LOW01);
|
|
low = (low >> 6) | ((low & 0x30) >> 2)
|
|
| (vt8231_read_value(data, VT8231_REG_TEMP_LOW25) << 4);
|
|
for (i = 0; i < 6; i++) {
|
|
if (ISTEMP(i, data->uch_config)) {
|
|
data->temp[i] = (vt8231_read_value(data,
|
|
regtemp[i]) << 2)
|
|
| ((low >> (2 * i)) & 0x03);
|
|
data->temp_max[i] = vt8231_read_value(data,
|
|
regtempmax[i]);
|
|
data->temp_min[i] = vt8231_read_value(data,
|
|
regtempmin[i]);
|
|
}
|
|
}
|
|
|
|
i = vt8231_read_value(data, VT8231_REG_FANDIV);
|
|
data->fan_div[0] = (i >> 4) & 0x03;
|
|
data->fan_div[1] = i >> 6;
|
|
data->alarms = vt8231_read_value(data, VT8231_REG_ALARM1) |
|
|
(vt8231_read_value(data, VT8231_REG_ALARM2) << 8);
|
|
|
|
/* Set alarm flags correctly */
|
|
if (!data->fan[0] && data->fan_min[0])
|
|
data->alarms |= 0x40;
|
|
else if (data->fan[0] && !data->fan_min[0])
|
|
data->alarms &= ~0x40;
|
|
|
|
if (!data->fan[1] && data->fan_min[1])
|
|
data->alarms |= 0x80;
|
|
else if (data->fan[1] && !data->fan_min[1])
|
|
data->alarms &= ~0x80;
|
|
|
|
data->last_updated = jiffies;
|
|
data->valid = true;
|
|
}
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
static int vt8231_device_add(unsigned short address)
|
|
{
|
|
struct resource res = {
|
|
.start = address,
|
|
.end = address + VT8231_EXTENT - 1,
|
|
.name = "vt8231",
|
|
.flags = IORESOURCE_IO,
|
|
};
|
|
int err;
|
|
|
|
err = acpi_check_resource_conflict(&res);
|
|
if (err)
|
|
goto exit;
|
|
|
|
pdev = platform_device_alloc("vt8231", address);
|
|
if (!pdev) {
|
|
err = -ENOMEM;
|
|
pr_err("Device allocation failed\n");
|
|
goto exit;
|
|
}
|
|
|
|
err = platform_device_add_resources(pdev, &res, 1);
|
|
if (err) {
|
|
pr_err("Device resource addition failed (%d)\n", err);
|
|
goto exit_device_put;
|
|
}
|
|
|
|
err = platform_device_add(pdev);
|
|
if (err) {
|
|
pr_err("Device addition failed (%d)\n", err);
|
|
goto exit_device_put;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_device_put:
|
|
platform_device_put(pdev);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static int vt8231_pci_probe(struct pci_dev *dev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
u16 address, val;
|
|
if (force_addr) {
|
|
address = force_addr & 0xff00;
|
|
dev_warn(&dev->dev, "Forcing ISA address 0x%x\n",
|
|
address);
|
|
|
|
if (PCIBIOS_SUCCESSFUL !=
|
|
pci_write_config_word(dev, VT8231_BASE_REG, address | 1))
|
|
return -ENODEV;
|
|
}
|
|
|
|
pci_read_config_word(dev, VT8231_BASE_REG, &val);
|
|
if (val == (u16)~0)
|
|
return -ENODEV;
|
|
|
|
address = val & ~(VT8231_EXTENT - 1);
|
|
if (address == 0) {
|
|
dev_err(&dev->dev, "base address not set - upgrade BIOS or use force_addr=0xaddr\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
pci_read_config_word(dev, VT8231_ENABLE_REG, &val);
|
|
if (val == (u16)~0)
|
|
return -ENODEV;
|
|
|
|
if (!(val & 0x0001)) {
|
|
dev_warn(&dev->dev, "enabling sensors\n");
|
|
if (PCIBIOS_SUCCESSFUL !=
|
|
pci_write_config_word(dev, VT8231_ENABLE_REG,
|
|
val | 0x0001))
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (platform_driver_register(&vt8231_driver))
|
|
goto exit;
|
|
|
|
/* Sets global pdev as a side effect */
|
|
if (vt8231_device_add(address))
|
|
goto exit_unregister;
|
|
|
|
/*
|
|
* Always return failure here. This is to allow other drivers to bind
|
|
* to this pci device. We don't really want to have control over the
|
|
* pci device, we only wanted to read as few register values from it.
|
|
*/
|
|
|
|
/*
|
|
* We do, however, mark ourselves as using the PCI device to stop it
|
|
* getting unloaded.
|
|
*/
|
|
s_bridge = pci_dev_get(dev);
|
|
return -ENODEV;
|
|
|
|
exit_unregister:
|
|
platform_driver_unregister(&vt8231_driver);
|
|
exit:
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int __init sm_vt8231_init(void)
|
|
{
|
|
return pci_register_driver(&vt8231_pci_driver);
|
|
}
|
|
|
|
static void __exit sm_vt8231_exit(void)
|
|
{
|
|
pci_unregister_driver(&vt8231_pci_driver);
|
|
if (s_bridge != NULL) {
|
|
platform_device_unregister(pdev);
|
|
platform_driver_unregister(&vt8231_driver);
|
|
pci_dev_put(s_bridge);
|
|
s_bridge = NULL;
|
|
}
|
|
}
|
|
|
|
MODULE_AUTHOR("Roger Lucas <vt8231@hiddenengine.co.uk>");
|
|
MODULE_DESCRIPTION("VT8231 sensors");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(sm_vt8231_init);
|
|
module_exit(sm_vt8231_exit);
|