linux/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.txt
Anson Huang 124ecd6658 dt-bindings: imx: Add pinctrl binding doc for i.MX8MN
Add binding doc for i.MX8MN pinctrl driver.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-25 10:39:39 +02:00

40 lines
1.3 KiB
Plaintext

* Freescale IMX8MN IOMUX Controller
Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
for common binding part and usage.
Required properties:
- compatible: "fsl,imx8mn-iomuxc"
- reg: should contain the base physical address and size of the iomuxc
registers.
Required properties in sub-nodes:
- fsl,pins: each entry consists of 6 integers and represents the mux and config
setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
input_val> are specified using a PIN_FUNC_ID macro, which can be found in
<arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h>. The last integer CONFIG is
the pad setting value like pull-up on this pin. Please refer to i.MX8M Nano
Reference Manual for detailed CONFIG settings.
Examples:
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
};
iomuxc: pinctrl@30330000 {
compatible = "fsl,imx8mn-iomuxc";
reg = <0x0 0x30330000 0x0 0x10000>;
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140
MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140
MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6 0x19
>;
};
};