linux/drivers/net/wireless/ath/ath9k
Zefir Kurtisi 87fedb974e ath9k: feed only active spectral / dfs-detector
Radar pulse and spectral scan reports are provided by the HW
with the ATH9K_RXERR_PHY flag set. Those are forwarded to
the dfs-detector and spectral module for further processing.

For some older chips, the pre-conditions checked in those
modules are ambiguous, since ATH9K_PHYERR_RADAR is used to
tag both types. As a result, spectral frames are fed into
the dfs-detector and vice versa.

This could lead to a false radar detection on a non-DFS
channel (which is uncritical), but more relevant it causes
useless CPU load for processing invalid frames.

This commit ensures that the dfs-detector and spectral
collector are only fed when they are active.

Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01 12:29:24 +02:00
..
ahb.c ath9k: simplify the code-paths when not using the built-in EEPROM 2016-07-19 20:57:14 +03:00
ani.c ath9k: clean up ANI per-channel pointer checking 2016-01-26 16:47:38 +02:00
ani.h
antenna.c
ar953x_initvals.h ath9k: Update QCA953x initvals 2016-03-11 13:59:56 +02:00
ar955x_1p0_initvals.h ath9k: Update AR955x initvals 2016-03-11 13:59:58 +02:00
ar956x_initvals.h ath9k: Update QCA956x initvals 2016-03-11 13:59:59 +02:00
ar5008_initvals.h
ar5008_phy.c ath9k: remove repetitions of mask array size 2016-09-09 15:12:18 +03:00
ar9001_initvals.h
ar9002_calib.c ath9k: ar9271_hw_pa_cal: use REG_READ_ARRAY 2015-03-30 11:31:30 +03:00
ar9002_hw.c
ar9002_initvals.h
ar9002_mac.c ath9k: add TPC capability to TX descriptor path 2014-11-25 14:09:56 -05:00
ar9002_phy.c ath9k_hw: fix spectral scan on AR9285 and newer 2016-07-19 20:58:07 +03:00
ar9002_phy.h ath9k_hw: fix spectral scan on AR9285 and newer 2016-07-19 20:58:07 +03:00
ar9003_2p2_initvals.h ath9k: Update AR9003 2.2 initvals 2016-03-11 13:59:56 +02:00
ar9003_aic.c ath9k: reduce stack usage in ar9003_aic_cal_post_process 2016-03-03 19:27:17 +02:00
ar9003_aic.h ath9k: reduce stack usage in ar9003_aic_cal_post_process 2016-03-03 19:27:17 +02:00
ar9003_buffalo_initvals.h
ar9003_calib.c ath9k_hw: implement temperature compensation support for AR9003+ 2016-07-19 20:59:17 +03:00
ar9003_eeprom.c ath9k: consider return code on 2016-08-19 13:07:06 +03:00
ar9003_eeprom.h ath9k: reuse ar9003_hw_tx_power_regwrite for tx99 setup 2016-05-09 20:46:31 +03:00
ar9003_hw.c ath9k_hw: add low power tx gain table for AR953x 2016-01-26 16:47:38 +02:00
ar9003_mac.c ath9k: add TPC capability to TX descriptor path 2014-11-25 14:09:56 -05:00
ar9003_mac.h
ar9003_mci.c ath9k: make GPIO API to support both of WMAC and SOC 2016-03-11 14:00:02 +02:00
ar9003_mci.h ath9k: Fix GPM initialization 2015-03-03 14:55:24 +02:00
ar9003_paprd.c
ar9003_phy.c ath9k: Fix symbol overlap window for half/quarter channels 2016-05-09 21:12:01 +03:00
ar9003_phy.h ath9k_hw: fix duplicate (and partially wrong) definition of AR_CH0_THERM 2016-07-19 20:59:04 +03:00
ar9003_rtt.c ath9k: Fix RTT chainmask usage 2015-03-13 15:19:36 +02:00
ar9003_rtt.h ath9k_hw: make support for PC-OEM cards optional 2014-10-27 14:16:18 -04:00
ar9003_wow.c ath9k: Restart TSF2 timers on wakeup 2015-02-26 14:58:46 +02:00
ar9330_1p1_initvals.h ath9k: Update AR933x initvals 2016-03-11 13:59:57 +02:00
ar9330_1p2_initvals.h ath9k: Update AR933x initvals 2016-03-11 13:59:57 +02:00
ar9340_initvals.h ath9k: Update AR9340 initvals 2016-03-11 13:59:57 +02:00
ar9462_2p0_initvals.h ath9k: Update AR9462 initvals 2016-03-11 13:59:57 +02:00
ar9462_2p1_initvals.h ath9k: Update AR9462 initvals 2016-03-11 13:59:57 +02:00
ar9485_initvals.h ath9k: Update AR9485 initvals 2016-03-11 13:59:58 +02:00
ar9565_1p0_initvals.h ath9k: Update AR9565 initvals 2016-03-11 13:59:58 +02:00
ar9565_1p1_initvals.h
ar9580_1p0_initvals.h ath9k: Update AR9580 initvals 2016-03-11 13:59:59 +02:00
ath9k.h ath9k: Switch to using mac80211 intermediate software queues. 2016-11-15 17:00:04 +02:00
beacon.c ath9k: Fix beacon configuration for addition/removal of interfaces 2016-07-08 17:03:41 +03:00
btcoex.c ath9k: fix BTCoex configuration for SOC chips 2016-03-11 14:00:04 +02:00
btcoex.h ath9k: fix BTCoex configuration for SOC chips 2016-03-11 14:00:04 +02:00
calib.c cfg80211: remove enum ieee80211_band 2016-04-12 15:56:15 +02:00
calib.h ath9k: restart hardware after noise floor calibration failure 2014-10-27 14:16:18 -04:00
channel.c ath9k: Switch to using mac80211 intermediate software queues. 2016-11-15 17:00:04 +02:00
common-beacon.c ath9k: remove ath9k_mod_tsf64_tu 2015-12-08 16:51:05 +02:00
common-beacon.h
common-debug.c ath9k: fix phyerror codes 2015-10-28 20:57:13 +02:00
common-debug.h
common-init.c cfg80211: remove enum ieee80211_band 2016-04-12 15:56:15 +02:00
common-init.h
common-spectral.c ath9k: fix NULL pointer dereference 2016-11-23 15:59:38 +02:00
common-spectral.h ath9k: Move processing of FFT frames to different functions 2015-05-09 16:46:11 +03:00
common.c cfg80211: remove enum ieee80211_band 2016-04-12 15:56:15 +02:00
common.h ath9k: Fix beacon configuration for addition/removal of interfaces 2016-07-08 17:03:41 +03:00
debug_sta.c ath9k: Switch to using mac80211 intermediate software queues. 2016-11-15 17:00:04 +02:00
debug.c ath9k: Switch to using mac80211 intermediate software queues. 2016-11-15 17:00:04 +02:00
debug.h ath9k: Switch to using mac80211 intermediate software queues. 2016-11-15 17:00:04 +02:00
dfs_debug.c
dfs_debug.h
dfs.c ath9k: DFS - add pulse chirp detection for FCC 2015-07-11 19:51:53 +03:00
dfs.h
dynack.c ath9k: Remove some #defined constants to decrease verbosity 2016-07-08 17:03:37 +03:00
dynack.h
eeprom_4k.c ath9k: Simplify and fix eeprom endianness swapping 2015-12-08 16:50:18 +02:00
eeprom_9287.c ath9k: Simplify and fix eeprom endianness swapping 2015-12-08 16:50:18 +02:00
eeprom_def.c ath9k: Simplify and fix eeprom endianness swapping 2015-12-08 16:50:18 +02:00
eeprom.c ath9k: simplify the code-paths when not using the built-in EEPROM 2016-07-19 20:57:14 +03:00
eeprom.h ath9k: Simplify and fix eeprom endianness swapping 2015-12-08 16:50:18 +02:00
gpio.c ath9k: mark ath_fill_led_pin() static 2016-09-02 19:06:05 +03:00
hif_usb.c ath9k_htc: Delete unnecessary variable initialisation 2016-04-07 19:37:40 +03:00
hif_usb.h ath9k_htc: introduce support for different fw versions 2015-09-18 10:40:14 +03:00
htc_drv_beacon.c ath9k: Remove some #defined constants to decrease verbosity 2016-07-08 17:03:37 +03:00
htc_drv_debug.c wireless: use %*pb[l] to print bitmaps including cpumasks and nodemasks 2015-02-13 21:21:38 -08:00
htc_drv_gpio.c ath9k: free GPIO resource for SOC GPIOs 2016-03-11 14:00:02 +02:00
htc_drv_init.c ath9k: Remove some #defined constants to decrease verbosity 2016-07-08 17:03:37 +03:00
htc_drv_main.c Merge ath-next from ath.git 2016-04-26 14:13:59 +03:00
htc_drv_txrx.c cfg80211: remove enum ieee80211_band 2016-04-12 15:56:15 +02:00
htc_hst.c ath9k_htc: fix minor mistakes in dev_err messages 2016-11-15 16:57:47 +02:00
htc_hst.h
htc.h ath9k_htc: add support of channel switch 2015-06-15 12:44:34 +03:00
hw-ops.h ath9k: Register private AIC ops 2015-03-20 08:27:17 +02:00
hw.c ath9k: fix ath9k_hw_gpio_get() to return 0 or 1 on success 2016-11-23 15:58:21 +02:00
hw.h ath9k_hw: implement temperature compensation support for AR9003+ 2016-07-19 20:59:17 +03:00
init.c ath9k: Switch to using mac80211 intermediate software queues. 2016-11-15 17:00:04 +02:00
Kconfig ath9k: disable RNG by default 2016-09-28 12:59:49 +03:00
link.c ath9k: match wait_for_completion_timeout return type 2015-08-13 15:27:12 +03:00
mac.c ath9k: Add QCA956x HW support 2015-01-15 14:25:03 +02:00
mac.h ath9k: Remove some #defined constants to decrease verbosity 2016-07-08 17:03:37 +03:00
main.c ath9k: Switch to using mac80211 intermediate software queues. 2016-11-15 17:00:04 +02:00
Makefile ath9k: feeding entropy in kernel from ADC capture 2015-12-11 14:08:58 +02:00
mci.c ath9k: Fix GPM initialization 2015-03-03 14:55:24 +02:00
mci.h
pci.c ath9k: Really fix LED polarity for some Mini PCI AR9220 MB92 cards. 2016-11-15 16:52:16 +02:00
phy.h
recv.c ath9k: feed only active spectral / dfs-detector 2016-12-01 12:29:24 +02:00
reg_aic.h ath9k: Add register definitions for AIC 2015-03-20 08:27:19 +02:00
reg_mci.h ath9k: Mute BT properly 2015-03-03 14:55:27 +02:00
reg_wow.h ath9k: Clear additional WoW events 2015-02-26 14:58:43 +02:00
reg.h ath9k: fix GPIO mask for AR9462 and AR9565 2016-06-14 16:21:31 +03:00
rng.c ath9k: change entropy formula for easier understanding 2016-10-13 17:22:44 +03:00
tx99.c ath9k: Proper TX99 interrupt ref count 2016-05-28 11:24:25 +03:00
wmi.c ath9k_htc: wmi: match wait_for_completion_timeout return type 2015-08-13 15:26:19 +03:00
wmi.h ath9k_htc: check seq number instead of cmd id for timeout 2015-04-07 20:07:44 +03:00
wow.c ath9k: Register correct WOW details with mac80211 2015-02-06 08:39:21 +02:00
xmit.c ath9k: Switch to using mac80211 intermediate software queues. 2016-11-15 17:00:04 +02:00