mirror of
https://github.com/torvalds/linux.git
synced 2024-12-24 11:51:27 +00:00
6cb68e46a9
On Tegra124, Tegra132 and Tegra210 devices the pads used by the Display Port Auxiliary (DPAUX) channel are multiplexed such that they can also be used by one of the internal I2C controllers. Note that this is different from I2C-over-AUX supported by the DPAUX controller. The register that configures these pads is part of the DPAUX controllers register set and so a pinctrl driver is being added for the DPAUX device to share these pads. Add the device-tree binding documentation for the DPAUX pad controller. Although there is only one group of pads associated with the DPAUX that can be multiplexed, the group still needs to be described by the binding. If the 'groups' property is not present in the binding, then the pads will not be allocated by the pinctrl core for a client and this would allow another client to re-configure the same pads that may already be in-use. Please note that although the "off" function for the DPAUX pads is not technically a pin-mux setting but more of a pin-conf setting it is simpler to expose these as a function so that the user can simply select either "aux", "i2c" or "off" as the current function/mode. Update the main DPAUX binding documentation to reference the DPAUX pad controller binding document and add the 'i2c-bus' subnode. The 'i2c-bus' subnode is used for populating I2C slaves for the DPAUX device so that the I2C driver core does not attempt to add the DPAUX pad controller nodes as I2C slaves. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
61 lines
1.6 KiB
Plaintext
61 lines
1.6 KiB
Plaintext
Device tree binding for NVIDIA Tegra DPAUX pad controller
|
|
========================================================
|
|
|
|
The Tegra Display Port Auxiliary (DPAUX) pad controller manages two pins
|
|
which can be assigned to either the DPAUX channel or to an I2C
|
|
controller.
|
|
|
|
This document defines the device-specific binding for the DPAUX pad
|
|
controller. Refer to pinctrl-bindings.txt in this directory for generic
|
|
information about pin controller device tree bindings. Please refer to
|
|
the binding document ../display/tegra/nvidia,tegra20-host1x.txt for more
|
|
details on the DPAUX binding.
|
|
|
|
Pin muxing:
|
|
-----------
|
|
|
|
Child nodes contain the pinmux configurations following the conventions
|
|
from the pinctrl-bindings.txt document.
|
|
|
|
Since only three configurations are possible, only three child nodes are
|
|
needed to describe the pin mux'ing options for the DPAUX pads.
|
|
Furthermore, given that the pad functions are only applicable to a
|
|
single set of pads, the child nodes only need to describe the pad group
|
|
the functions are being applied to rather than the individual pads.
|
|
|
|
Required properties:
|
|
- groups: Must be "dpaux-io"
|
|
- function: Must be either "aux", "i2c" or "off".
|
|
|
|
Example:
|
|
--------
|
|
|
|
dpaux@545c0000 {
|
|
...
|
|
|
|
state_dpaux_aux: pinmux-aux {
|
|
groups = "dpaux-io";
|
|
function = "aux";
|
|
};
|
|
|
|
state_dpaux_i2c: pinmux-i2c {
|
|
groups = "dpaux-io";
|
|
function = "i2c";
|
|
};
|
|
|
|
state_dpaux_off: pinmux-off {
|
|
groups = "dpaux-io";
|
|
function = "off";
|
|
};
|
|
};
|
|
|
|
...
|
|
|
|
i2c@7000d100 {
|
|
...
|
|
pinctrl-0 = <&state_dpaux_i2c>;
|
|
pinctrl-1 = <&state_dpaux_off>;
|
|
pinctrl-names = "default", "idle";
|
|
status = "disabled";
|
|
};
|