mirror of
https://github.com/torvalds/linux.git
synced 2024-11-27 06:31:52 +00:00
92266c65e0
Replace the open-code with sysfs_emit() to simplify the code. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
1590 lines
46 KiB
C
1590 lines
46 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* CPPC (Collaborative Processor Performance Control) methods used by CPUfreq drivers.
|
|
*
|
|
* (C) Copyright 2014, 2015 Linaro Ltd.
|
|
* Author: Ashwin Chaugule <ashwin.chaugule@linaro.org>
|
|
*
|
|
* CPPC describes a few methods for controlling CPU performance using
|
|
* information from a per CPU table called CPC. This table is described in
|
|
* the ACPI v5.0+ specification. The table consists of a list of
|
|
* registers which may be memory mapped or hardware registers and also may
|
|
* include some static integer values.
|
|
*
|
|
* CPU performance is on an abstract continuous scale as against a discretized
|
|
* P-state scale which is tied to CPU frequency only. In brief, the basic
|
|
* operation involves:
|
|
*
|
|
* - OS makes a CPU performance request. (Can provide min and max bounds)
|
|
*
|
|
* - Platform (such as BMC) is free to optimize request within requested bounds
|
|
* depending on power/thermal budgets etc.
|
|
*
|
|
* - Platform conveys its decision back to OS
|
|
*
|
|
* The communication between OS and platform occurs through another medium
|
|
* called (PCC) Platform Communication Channel. This is a generic mailbox like
|
|
* mechanism which includes doorbell semantics to indicate register updates.
|
|
* See drivers/mailbox/pcc.c for details on PCC.
|
|
*
|
|
* Finer details about the PCC and CPPC spec are available in the ACPI v5.1 and
|
|
* above specifications.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "ACPI CPPC: " fmt
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/ktime.h>
|
|
#include <linux/rwsem.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/topology.h>
|
|
|
|
#include <acpi/cppc_acpi.h>
|
|
|
|
struct cppc_pcc_data {
|
|
struct pcc_mbox_chan *pcc_channel;
|
|
void __iomem *pcc_comm_addr;
|
|
bool pcc_channel_acquired;
|
|
unsigned int deadline_us;
|
|
unsigned int pcc_mpar, pcc_mrtt, pcc_nominal;
|
|
|
|
bool pending_pcc_write_cmd; /* Any pending/batched PCC write cmds? */
|
|
bool platform_owns_pcc; /* Ownership of PCC subspace */
|
|
unsigned int pcc_write_cnt; /* Running count of PCC write commands */
|
|
|
|
/*
|
|
* Lock to provide controlled access to the PCC channel.
|
|
*
|
|
* For performance critical usecases(currently cppc_set_perf)
|
|
* We need to take read_lock and check if channel belongs to OSPM
|
|
* before reading or writing to PCC subspace
|
|
* We need to take write_lock before transferring the channel
|
|
* ownership to the platform via a Doorbell
|
|
* This allows us to batch a number of CPPC requests if they happen
|
|
* to originate in about the same time
|
|
*
|
|
* For non-performance critical usecases(init)
|
|
* Take write_lock for all purposes which gives exclusive access
|
|
*/
|
|
struct rw_semaphore pcc_lock;
|
|
|
|
/* Wait queue for CPUs whose requests were batched */
|
|
wait_queue_head_t pcc_write_wait_q;
|
|
ktime_t last_cmd_cmpl_time;
|
|
ktime_t last_mpar_reset;
|
|
int mpar_count;
|
|
int refcount;
|
|
};
|
|
|
|
/* Array to represent the PCC channel per subspace ID */
|
|
static struct cppc_pcc_data *pcc_data[MAX_PCC_SUBSPACES];
|
|
/* The cpu_pcc_subspace_idx contains per CPU subspace ID */
|
|
static DEFINE_PER_CPU(int, cpu_pcc_subspace_idx);
|
|
|
|
/*
|
|
* The cpc_desc structure contains the ACPI register details
|
|
* as described in the per CPU _CPC tables. The details
|
|
* include the type of register (e.g. PCC, System IO, FFH etc.)
|
|
* and destination addresses which lets us READ/WRITE CPU performance
|
|
* information using the appropriate I/O methods.
|
|
*/
|
|
static DEFINE_PER_CPU(struct cpc_desc *, cpc_desc_ptr);
|
|
|
|
/* pcc mapped address + header size + offset within PCC subspace */
|
|
#define GET_PCC_VADDR(offs, pcc_ss_id) (pcc_data[pcc_ss_id]->pcc_comm_addr + \
|
|
0x8 + (offs))
|
|
|
|
/* Check if a CPC register is in PCC */
|
|
#define CPC_IN_PCC(cpc) ((cpc)->type == ACPI_TYPE_BUFFER && \
|
|
(cpc)->cpc_entry.reg.space_id == \
|
|
ACPI_ADR_SPACE_PLATFORM_COMM)
|
|
|
|
/* Check if a CPC register is in SystemMemory */
|
|
#define CPC_IN_SYSTEM_MEMORY(cpc) ((cpc)->type == ACPI_TYPE_BUFFER && \
|
|
(cpc)->cpc_entry.reg.space_id == \
|
|
ACPI_ADR_SPACE_SYSTEM_MEMORY)
|
|
|
|
/* Check if a CPC register is in SystemIo */
|
|
#define CPC_IN_SYSTEM_IO(cpc) ((cpc)->type == ACPI_TYPE_BUFFER && \
|
|
(cpc)->cpc_entry.reg.space_id == \
|
|
ACPI_ADR_SPACE_SYSTEM_IO)
|
|
|
|
/* Evaluates to True if reg is a NULL register descriptor */
|
|
#define IS_NULL_REG(reg) ((reg)->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY && \
|
|
(reg)->address == 0 && \
|
|
(reg)->bit_width == 0 && \
|
|
(reg)->bit_offset == 0 && \
|
|
(reg)->access_width == 0)
|
|
|
|
/* Evaluates to True if an optional cpc field is supported */
|
|
#define CPC_SUPPORTED(cpc) ((cpc)->type == ACPI_TYPE_INTEGER ? \
|
|
!!(cpc)->cpc_entry.int_value : \
|
|
!IS_NULL_REG(&(cpc)->cpc_entry.reg))
|
|
/*
|
|
* Arbitrary Retries in case the remote processor is slow to respond
|
|
* to PCC commands. Keeping it high enough to cover emulators where
|
|
* the processors run painfully slow.
|
|
*/
|
|
#define NUM_RETRIES 500ULL
|
|
|
|
#define OVER_16BTS_MASK ~0xFFFFULL
|
|
|
|
#define define_one_cppc_ro(_name) \
|
|
static struct kobj_attribute _name = \
|
|
__ATTR(_name, 0444, show_##_name, NULL)
|
|
|
|
#define to_cpc_desc(a) container_of(a, struct cpc_desc, kobj)
|
|
|
|
#define show_cppc_data(access_fn, struct_name, member_name) \
|
|
static ssize_t show_##member_name(struct kobject *kobj, \
|
|
struct kobj_attribute *attr, char *buf) \
|
|
{ \
|
|
struct cpc_desc *cpc_ptr = to_cpc_desc(kobj); \
|
|
struct struct_name st_name = {0}; \
|
|
int ret; \
|
|
\
|
|
ret = access_fn(cpc_ptr->cpu_id, &st_name); \
|
|
if (ret) \
|
|
return ret; \
|
|
\
|
|
return sysfs_emit(buf, "%llu\n", \
|
|
(u64)st_name.member_name); \
|
|
} \
|
|
define_one_cppc_ro(member_name)
|
|
|
|
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, highest_perf);
|
|
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, lowest_perf);
|
|
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, nominal_perf);
|
|
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, lowest_nonlinear_perf);
|
|
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, lowest_freq);
|
|
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, nominal_freq);
|
|
|
|
show_cppc_data(cppc_get_perf_ctrs, cppc_perf_fb_ctrs, reference_perf);
|
|
show_cppc_data(cppc_get_perf_ctrs, cppc_perf_fb_ctrs, wraparound_time);
|
|
|
|
static ssize_t show_feedback_ctrs(struct kobject *kobj,
|
|
struct kobj_attribute *attr, char *buf)
|
|
{
|
|
struct cpc_desc *cpc_ptr = to_cpc_desc(kobj);
|
|
struct cppc_perf_fb_ctrs fb_ctrs = {0};
|
|
int ret;
|
|
|
|
ret = cppc_get_perf_ctrs(cpc_ptr->cpu_id, &fb_ctrs);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return sysfs_emit(buf, "ref:%llu del:%llu\n",
|
|
fb_ctrs.reference, fb_ctrs.delivered);
|
|
}
|
|
define_one_cppc_ro(feedback_ctrs);
|
|
|
|
static struct attribute *cppc_attrs[] = {
|
|
&feedback_ctrs.attr,
|
|
&reference_perf.attr,
|
|
&wraparound_time.attr,
|
|
&highest_perf.attr,
|
|
&lowest_perf.attr,
|
|
&lowest_nonlinear_perf.attr,
|
|
&nominal_perf.attr,
|
|
&nominal_freq.attr,
|
|
&lowest_freq.attr,
|
|
NULL
|
|
};
|
|
ATTRIBUTE_GROUPS(cppc);
|
|
|
|
static struct kobj_type cppc_ktype = {
|
|
.sysfs_ops = &kobj_sysfs_ops,
|
|
.default_groups = cppc_groups,
|
|
};
|
|
|
|
static int check_pcc_chan(int pcc_ss_id, bool chk_err_bit)
|
|
{
|
|
int ret, status;
|
|
struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id];
|
|
struct acpi_pcct_shared_memory __iomem *generic_comm_base =
|
|
pcc_ss_data->pcc_comm_addr;
|
|
|
|
if (!pcc_ss_data->platform_owns_pcc)
|
|
return 0;
|
|
|
|
/*
|
|
* Poll PCC status register every 3us(delay_us) for maximum of
|
|
* deadline_us(timeout_us) until PCC command complete bit is set(cond)
|
|
*/
|
|
ret = readw_relaxed_poll_timeout(&generic_comm_base->status, status,
|
|
status & PCC_CMD_COMPLETE_MASK, 3,
|
|
pcc_ss_data->deadline_us);
|
|
|
|
if (likely(!ret)) {
|
|
pcc_ss_data->platform_owns_pcc = false;
|
|
if (chk_err_bit && (status & PCC_ERROR_MASK))
|
|
ret = -EIO;
|
|
}
|
|
|
|
if (unlikely(ret))
|
|
pr_err("PCC check channel failed for ss: %d. ret=%d\n",
|
|
pcc_ss_id, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* This function transfers the ownership of the PCC to the platform
|
|
* So it must be called while holding write_lock(pcc_lock)
|
|
*/
|
|
static int send_pcc_cmd(int pcc_ss_id, u16 cmd)
|
|
{
|
|
int ret = -EIO, i;
|
|
struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id];
|
|
struct acpi_pcct_shared_memory __iomem *generic_comm_base =
|
|
pcc_ss_data->pcc_comm_addr;
|
|
unsigned int time_delta;
|
|
|
|
/*
|
|
* For CMD_WRITE we know for a fact the caller should have checked
|
|
* the channel before writing to PCC space
|
|
*/
|
|
if (cmd == CMD_READ) {
|
|
/*
|
|
* If there are pending cpc_writes, then we stole the channel
|
|
* before write completion, so first send a WRITE command to
|
|
* platform
|
|
*/
|
|
if (pcc_ss_data->pending_pcc_write_cmd)
|
|
send_pcc_cmd(pcc_ss_id, CMD_WRITE);
|
|
|
|
ret = check_pcc_chan(pcc_ss_id, false);
|
|
if (ret)
|
|
goto end;
|
|
} else /* CMD_WRITE */
|
|
pcc_ss_data->pending_pcc_write_cmd = FALSE;
|
|
|
|
/*
|
|
* Handle the Minimum Request Turnaround Time(MRTT)
|
|
* "The minimum amount of time that OSPM must wait after the completion
|
|
* of a command before issuing the next command, in microseconds"
|
|
*/
|
|
if (pcc_ss_data->pcc_mrtt) {
|
|
time_delta = ktime_us_delta(ktime_get(),
|
|
pcc_ss_data->last_cmd_cmpl_time);
|
|
if (pcc_ss_data->pcc_mrtt > time_delta)
|
|
udelay(pcc_ss_data->pcc_mrtt - time_delta);
|
|
}
|
|
|
|
/*
|
|
* Handle the non-zero Maximum Periodic Access Rate(MPAR)
|
|
* "The maximum number of periodic requests that the subspace channel can
|
|
* support, reported in commands per minute. 0 indicates no limitation."
|
|
*
|
|
* This parameter should be ideally zero or large enough so that it can
|
|
* handle maximum number of requests that all the cores in the system can
|
|
* collectively generate. If it is not, we will follow the spec and just
|
|
* not send the request to the platform after hitting the MPAR limit in
|
|
* any 60s window
|
|
*/
|
|
if (pcc_ss_data->pcc_mpar) {
|
|
if (pcc_ss_data->mpar_count == 0) {
|
|
time_delta = ktime_ms_delta(ktime_get(),
|
|
pcc_ss_data->last_mpar_reset);
|
|
if ((time_delta < 60 * MSEC_PER_SEC) && pcc_ss_data->last_mpar_reset) {
|
|
pr_debug("PCC cmd for subspace %d not sent due to MPAR limit",
|
|
pcc_ss_id);
|
|
ret = -EIO;
|
|
goto end;
|
|
}
|
|
pcc_ss_data->last_mpar_reset = ktime_get();
|
|
pcc_ss_data->mpar_count = pcc_ss_data->pcc_mpar;
|
|
}
|
|
pcc_ss_data->mpar_count--;
|
|
}
|
|
|
|
/* Write to the shared comm region. */
|
|
writew_relaxed(cmd, &generic_comm_base->command);
|
|
|
|
/* Flip CMD COMPLETE bit */
|
|
writew_relaxed(0, &generic_comm_base->status);
|
|
|
|
pcc_ss_data->platform_owns_pcc = true;
|
|
|
|
/* Ring doorbell */
|
|
ret = mbox_send_message(pcc_ss_data->pcc_channel->mchan, &cmd);
|
|
if (ret < 0) {
|
|
pr_err("Err sending PCC mbox message. ss: %d cmd:%d, ret:%d\n",
|
|
pcc_ss_id, cmd, ret);
|
|
goto end;
|
|
}
|
|
|
|
/* wait for completion and check for PCC error bit */
|
|
ret = check_pcc_chan(pcc_ss_id, true);
|
|
|
|
if (pcc_ss_data->pcc_mrtt)
|
|
pcc_ss_data->last_cmd_cmpl_time = ktime_get();
|
|
|
|
if (pcc_ss_data->pcc_channel->mchan->mbox->txdone_irq)
|
|
mbox_chan_txdone(pcc_ss_data->pcc_channel->mchan, ret);
|
|
else
|
|
mbox_client_txdone(pcc_ss_data->pcc_channel->mchan, ret);
|
|
|
|
end:
|
|
if (cmd == CMD_WRITE) {
|
|
if (unlikely(ret)) {
|
|
for_each_possible_cpu(i) {
|
|
struct cpc_desc *desc = per_cpu(cpc_desc_ptr, i);
|
|
|
|
if (!desc)
|
|
continue;
|
|
|
|
if (desc->write_cmd_id == pcc_ss_data->pcc_write_cnt)
|
|
desc->write_cmd_status = ret;
|
|
}
|
|
}
|
|
pcc_ss_data->pcc_write_cnt++;
|
|
wake_up_all(&pcc_ss_data->pcc_write_wait_q);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void cppc_chan_tx_done(struct mbox_client *cl, void *msg, int ret)
|
|
{
|
|
if (ret < 0)
|
|
pr_debug("TX did not complete: CMD sent:%x, ret:%d\n",
|
|
*(u16 *)msg, ret);
|
|
else
|
|
pr_debug("TX completed. CMD sent:%x, ret:%d\n",
|
|
*(u16 *)msg, ret);
|
|
}
|
|
|
|
static struct mbox_client cppc_mbox_cl = {
|
|
.tx_done = cppc_chan_tx_done,
|
|
.knows_txdone = true,
|
|
};
|
|
|
|
static int acpi_get_psd(struct cpc_desc *cpc_ptr, acpi_handle handle)
|
|
{
|
|
int result = -EFAULT;
|
|
acpi_status status = AE_OK;
|
|
struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
|
|
struct acpi_buffer format = {sizeof("NNNNN"), "NNNNN"};
|
|
struct acpi_buffer state = {0, NULL};
|
|
union acpi_object *psd = NULL;
|
|
struct acpi_psd_package *pdomain;
|
|
|
|
status = acpi_evaluate_object_typed(handle, "_PSD", NULL,
|
|
&buffer, ACPI_TYPE_PACKAGE);
|
|
if (status == AE_NOT_FOUND) /* _PSD is optional */
|
|
return 0;
|
|
if (ACPI_FAILURE(status))
|
|
return -ENODEV;
|
|
|
|
psd = buffer.pointer;
|
|
if (!psd || psd->package.count != 1) {
|
|
pr_debug("Invalid _PSD data\n");
|
|
goto end;
|
|
}
|
|
|
|
pdomain = &(cpc_ptr->domain_info);
|
|
|
|
state.length = sizeof(struct acpi_psd_package);
|
|
state.pointer = pdomain;
|
|
|
|
status = acpi_extract_package(&(psd->package.elements[0]),
|
|
&format, &state);
|
|
if (ACPI_FAILURE(status)) {
|
|
pr_debug("Invalid _PSD data for CPU:%d\n", cpc_ptr->cpu_id);
|
|
goto end;
|
|
}
|
|
|
|
if (pdomain->num_entries != ACPI_PSD_REV0_ENTRIES) {
|
|
pr_debug("Unknown _PSD:num_entries for CPU:%d\n", cpc_ptr->cpu_id);
|
|
goto end;
|
|
}
|
|
|
|
if (pdomain->revision != ACPI_PSD_REV0_REVISION) {
|
|
pr_debug("Unknown _PSD:revision for CPU: %d\n", cpc_ptr->cpu_id);
|
|
goto end;
|
|
}
|
|
|
|
if (pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ALL &&
|
|
pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ANY &&
|
|
pdomain->coord_type != DOMAIN_COORD_TYPE_HW_ALL) {
|
|
pr_debug("Invalid _PSD:coord_type for CPU:%d\n", cpc_ptr->cpu_id);
|
|
goto end;
|
|
}
|
|
|
|
result = 0;
|
|
end:
|
|
kfree(buffer.pointer);
|
|
return result;
|
|
}
|
|
|
|
bool acpi_cpc_valid(void)
|
|
{
|
|
struct cpc_desc *cpc_ptr;
|
|
int cpu;
|
|
|
|
if (acpi_disabled)
|
|
return false;
|
|
|
|
for_each_present_cpu(cpu) {
|
|
cpc_ptr = per_cpu(cpc_desc_ptr, cpu);
|
|
if (!cpc_ptr)
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_cpc_valid);
|
|
|
|
bool cppc_allow_fast_switch(void)
|
|
{
|
|
struct cpc_register_resource *desired_reg;
|
|
struct cpc_desc *cpc_ptr;
|
|
int cpu;
|
|
|
|
for_each_possible_cpu(cpu) {
|
|
cpc_ptr = per_cpu(cpc_desc_ptr, cpu);
|
|
desired_reg = &cpc_ptr->cpc_regs[DESIRED_PERF];
|
|
if (!CPC_IN_SYSTEM_MEMORY(desired_reg) &&
|
|
!CPC_IN_SYSTEM_IO(desired_reg))
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_allow_fast_switch);
|
|
|
|
/**
|
|
* acpi_get_psd_map - Map the CPUs in the freq domain of a given cpu
|
|
* @cpu: Find all CPUs that share a domain with cpu.
|
|
* @cpu_data: Pointer to CPU specific CPPC data including PSD info.
|
|
*
|
|
* Return: 0 for success or negative value for err.
|
|
*/
|
|
int acpi_get_psd_map(unsigned int cpu, struct cppc_cpudata *cpu_data)
|
|
{
|
|
struct cpc_desc *cpc_ptr, *match_cpc_ptr;
|
|
struct acpi_psd_package *match_pdomain;
|
|
struct acpi_psd_package *pdomain;
|
|
int count_target, i;
|
|
|
|
/*
|
|
* Now that we have _PSD data from all CPUs, let's setup P-state
|
|
* domain info.
|
|
*/
|
|
cpc_ptr = per_cpu(cpc_desc_ptr, cpu);
|
|
if (!cpc_ptr)
|
|
return -EFAULT;
|
|
|
|
pdomain = &(cpc_ptr->domain_info);
|
|
cpumask_set_cpu(cpu, cpu_data->shared_cpu_map);
|
|
if (pdomain->num_processors <= 1)
|
|
return 0;
|
|
|
|
/* Validate the Domain info */
|
|
count_target = pdomain->num_processors;
|
|
if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ALL)
|
|
cpu_data->shared_type = CPUFREQ_SHARED_TYPE_ALL;
|
|
else if (pdomain->coord_type == DOMAIN_COORD_TYPE_HW_ALL)
|
|
cpu_data->shared_type = CPUFREQ_SHARED_TYPE_HW;
|
|
else if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ANY)
|
|
cpu_data->shared_type = CPUFREQ_SHARED_TYPE_ANY;
|
|
|
|
for_each_possible_cpu(i) {
|
|
if (i == cpu)
|
|
continue;
|
|
|
|
match_cpc_ptr = per_cpu(cpc_desc_ptr, i);
|
|
if (!match_cpc_ptr)
|
|
goto err_fault;
|
|
|
|
match_pdomain = &(match_cpc_ptr->domain_info);
|
|
if (match_pdomain->domain != pdomain->domain)
|
|
continue;
|
|
|
|
/* Here i and cpu are in the same domain */
|
|
if (match_pdomain->num_processors != count_target)
|
|
goto err_fault;
|
|
|
|
if (pdomain->coord_type != match_pdomain->coord_type)
|
|
goto err_fault;
|
|
|
|
cpumask_set_cpu(i, cpu_data->shared_cpu_map);
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_fault:
|
|
/* Assume no coordination on any error parsing domain info */
|
|
cpumask_clear(cpu_data->shared_cpu_map);
|
|
cpumask_set_cpu(cpu, cpu_data->shared_cpu_map);
|
|
cpu_data->shared_type = CPUFREQ_SHARED_TYPE_NONE;
|
|
|
|
return -EFAULT;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_get_psd_map);
|
|
|
|
static int register_pcc_channel(int pcc_ss_idx)
|
|
{
|
|
struct pcc_mbox_chan *pcc_chan;
|
|
u64 usecs_lat;
|
|
|
|
if (pcc_ss_idx >= 0) {
|
|
pcc_chan = pcc_mbox_request_channel(&cppc_mbox_cl, pcc_ss_idx);
|
|
|
|
if (IS_ERR(pcc_chan)) {
|
|
pr_err("Failed to find PCC channel for subspace %d\n",
|
|
pcc_ss_idx);
|
|
return -ENODEV;
|
|
}
|
|
|
|
pcc_data[pcc_ss_idx]->pcc_channel = pcc_chan;
|
|
/*
|
|
* cppc_ss->latency is just a Nominal value. In reality
|
|
* the remote processor could be much slower to reply.
|
|
* So add an arbitrary amount of wait on top of Nominal.
|
|
*/
|
|
usecs_lat = NUM_RETRIES * pcc_chan->latency;
|
|
pcc_data[pcc_ss_idx]->deadline_us = usecs_lat;
|
|
pcc_data[pcc_ss_idx]->pcc_mrtt = pcc_chan->min_turnaround_time;
|
|
pcc_data[pcc_ss_idx]->pcc_mpar = pcc_chan->max_access_rate;
|
|
pcc_data[pcc_ss_idx]->pcc_nominal = pcc_chan->latency;
|
|
|
|
pcc_data[pcc_ss_idx]->pcc_comm_addr =
|
|
acpi_os_ioremap(pcc_chan->shmem_base_addr,
|
|
pcc_chan->shmem_size);
|
|
if (!pcc_data[pcc_ss_idx]->pcc_comm_addr) {
|
|
pr_err("Failed to ioremap PCC comm region mem for %d\n",
|
|
pcc_ss_idx);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Set flag so that we don't come here for each CPU. */
|
|
pcc_data[pcc_ss_idx]->pcc_channel_acquired = true;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* cpc_ffh_supported() - check if FFH reading supported
|
|
*
|
|
* Check if the architecture has support for functional fixed hardware
|
|
* read/write capability.
|
|
*
|
|
* Return: true for supported, false for not supported
|
|
*/
|
|
bool __weak cpc_ffh_supported(void)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* cpc_supported_by_cpu() - check if CPPC is supported by CPU
|
|
*
|
|
* Check if the architectural support for CPPC is present even
|
|
* if the _OSC hasn't prescribed it
|
|
*
|
|
* Return: true for supported, false for not supported
|
|
*/
|
|
bool __weak cpc_supported_by_cpu(void)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* pcc_data_alloc() - Allocate the pcc_data memory for pcc subspace
|
|
*
|
|
* Check and allocate the cppc_pcc_data memory.
|
|
* In some processor configurations it is possible that same subspace
|
|
* is shared between multiple CPUs. This is seen especially in CPUs
|
|
* with hardware multi-threading support.
|
|
*
|
|
* Return: 0 for success, errno for failure
|
|
*/
|
|
static int pcc_data_alloc(int pcc_ss_id)
|
|
{
|
|
if (pcc_ss_id < 0 || pcc_ss_id >= MAX_PCC_SUBSPACES)
|
|
return -EINVAL;
|
|
|
|
if (pcc_data[pcc_ss_id]) {
|
|
pcc_data[pcc_ss_id]->refcount++;
|
|
} else {
|
|
pcc_data[pcc_ss_id] = kzalloc(sizeof(struct cppc_pcc_data),
|
|
GFP_KERNEL);
|
|
if (!pcc_data[pcc_ss_id])
|
|
return -ENOMEM;
|
|
pcc_data[pcc_ss_id]->refcount++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* An example CPC table looks like the following.
|
|
*
|
|
* Name (_CPC, Package() {
|
|
* 17, // NumEntries
|
|
* 1, // Revision
|
|
* ResourceTemplate() {Register(PCC, 32, 0, 0x120, 2)}, // Highest Performance
|
|
* ResourceTemplate() {Register(PCC, 32, 0, 0x124, 2)}, // Nominal Performance
|
|
* ResourceTemplate() {Register(PCC, 32, 0, 0x128, 2)}, // Lowest Nonlinear Performance
|
|
* ResourceTemplate() {Register(PCC, 32, 0, 0x12C, 2)}, // Lowest Performance
|
|
* ResourceTemplate() {Register(PCC, 32, 0, 0x130, 2)}, // Guaranteed Performance Register
|
|
* ResourceTemplate() {Register(PCC, 32, 0, 0x110, 2)}, // Desired Performance Register
|
|
* ResourceTemplate() {Register(SystemMemory, 0, 0, 0, 0)},
|
|
* ...
|
|
* ...
|
|
* ...
|
|
* }
|
|
* Each Register() encodes how to access that specific register.
|
|
* e.g. a sample PCC entry has the following encoding:
|
|
*
|
|
* Register (
|
|
* PCC, // AddressSpaceKeyword
|
|
* 8, // RegisterBitWidth
|
|
* 8, // RegisterBitOffset
|
|
* 0x30, // RegisterAddress
|
|
* 9, // AccessSize (subspace ID)
|
|
* )
|
|
*/
|
|
|
|
#ifndef arch_init_invariance_cppc
|
|
static inline void arch_init_invariance_cppc(void) { }
|
|
#endif
|
|
|
|
/**
|
|
* acpi_cppc_processor_probe - Search for per CPU _CPC objects.
|
|
* @pr: Ptr to acpi_processor containing this CPU's logical ID.
|
|
*
|
|
* Return: 0 for success or negative value for err.
|
|
*/
|
|
int acpi_cppc_processor_probe(struct acpi_processor *pr)
|
|
{
|
|
struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
|
|
union acpi_object *out_obj, *cpc_obj;
|
|
struct cpc_desc *cpc_ptr;
|
|
struct cpc_reg *gas_t;
|
|
struct device *cpu_dev;
|
|
acpi_handle handle = pr->handle;
|
|
unsigned int num_ent, i, cpc_rev;
|
|
int pcc_subspace_id = -1;
|
|
acpi_status status;
|
|
int ret = -ENODATA;
|
|
|
|
if (!osc_sb_cppc2_support_acked) {
|
|
pr_debug("CPPC v2 _OSC not acked\n");
|
|
if (!cpc_supported_by_cpu())
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Parse the ACPI _CPC table for this CPU. */
|
|
status = acpi_evaluate_object_typed(handle, "_CPC", NULL, &output,
|
|
ACPI_TYPE_PACKAGE);
|
|
if (ACPI_FAILURE(status)) {
|
|
ret = -ENODEV;
|
|
goto out_buf_free;
|
|
}
|
|
|
|
out_obj = (union acpi_object *) output.pointer;
|
|
|
|
cpc_ptr = kzalloc(sizeof(struct cpc_desc), GFP_KERNEL);
|
|
if (!cpc_ptr) {
|
|
ret = -ENOMEM;
|
|
goto out_buf_free;
|
|
}
|
|
|
|
/* First entry is NumEntries. */
|
|
cpc_obj = &out_obj->package.elements[0];
|
|
if (cpc_obj->type == ACPI_TYPE_INTEGER) {
|
|
num_ent = cpc_obj->integer.value;
|
|
if (num_ent <= 1) {
|
|
pr_debug("Unexpected _CPC NumEntries value (%d) for CPU:%d\n",
|
|
num_ent, pr->id);
|
|
goto out_free;
|
|
}
|
|
} else {
|
|
pr_debug("Unexpected _CPC NumEntries entry type (%d) for CPU:%d\n",
|
|
cpc_obj->type, pr->id);
|
|
goto out_free;
|
|
}
|
|
|
|
/* Second entry should be revision. */
|
|
cpc_obj = &out_obj->package.elements[1];
|
|
if (cpc_obj->type == ACPI_TYPE_INTEGER) {
|
|
cpc_rev = cpc_obj->integer.value;
|
|
} else {
|
|
pr_debug("Unexpected _CPC Revision entry type (%d) for CPU:%d\n",
|
|
cpc_obj->type, pr->id);
|
|
goto out_free;
|
|
}
|
|
|
|
if (cpc_rev < CPPC_V2_REV) {
|
|
pr_debug("Unsupported _CPC Revision (%d) for CPU:%d\n", cpc_rev,
|
|
pr->id);
|
|
goto out_free;
|
|
}
|
|
|
|
/*
|
|
* Disregard _CPC if the number of entries in the return pachage is not
|
|
* as expected, but support future revisions being proper supersets of
|
|
* the v3 and only causing more entries to be returned by _CPC.
|
|
*/
|
|
if ((cpc_rev == CPPC_V2_REV && num_ent != CPPC_V2_NUM_ENT) ||
|
|
(cpc_rev == CPPC_V3_REV && num_ent != CPPC_V3_NUM_ENT) ||
|
|
(cpc_rev > CPPC_V3_REV && num_ent <= CPPC_V3_NUM_ENT)) {
|
|
pr_debug("Unexpected number of _CPC return package entries (%d) for CPU:%d\n",
|
|
num_ent, pr->id);
|
|
goto out_free;
|
|
}
|
|
if (cpc_rev > CPPC_V3_REV) {
|
|
num_ent = CPPC_V3_NUM_ENT;
|
|
cpc_rev = CPPC_V3_REV;
|
|
}
|
|
|
|
cpc_ptr->num_entries = num_ent;
|
|
cpc_ptr->version = cpc_rev;
|
|
|
|
/* Iterate through remaining entries in _CPC */
|
|
for (i = 2; i < num_ent; i++) {
|
|
cpc_obj = &out_obj->package.elements[i];
|
|
|
|
if (cpc_obj->type == ACPI_TYPE_INTEGER) {
|
|
cpc_ptr->cpc_regs[i-2].type = ACPI_TYPE_INTEGER;
|
|
cpc_ptr->cpc_regs[i-2].cpc_entry.int_value = cpc_obj->integer.value;
|
|
} else if (cpc_obj->type == ACPI_TYPE_BUFFER) {
|
|
gas_t = (struct cpc_reg *)
|
|
cpc_obj->buffer.pointer;
|
|
|
|
/*
|
|
* The PCC Subspace index is encoded inside
|
|
* the CPC table entries. The same PCC index
|
|
* will be used for all the PCC entries,
|
|
* so extract it only once.
|
|
*/
|
|
if (gas_t->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) {
|
|
if (pcc_subspace_id < 0) {
|
|
pcc_subspace_id = gas_t->access_width;
|
|
if (pcc_data_alloc(pcc_subspace_id))
|
|
goto out_free;
|
|
} else if (pcc_subspace_id != gas_t->access_width) {
|
|
pr_debug("Mismatched PCC ids in _CPC for CPU:%d\n",
|
|
pr->id);
|
|
goto out_free;
|
|
}
|
|
} else if (gas_t->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
|
|
if (gas_t->address) {
|
|
void __iomem *addr;
|
|
|
|
if (!osc_cpc_flexible_adr_space_confirmed) {
|
|
pr_debug("Flexible address space capability not supported\n");
|
|
if (!cpc_supported_by_cpu())
|
|
goto out_free;
|
|
}
|
|
|
|
addr = ioremap(gas_t->address, gas_t->bit_width/8);
|
|
if (!addr)
|
|
goto out_free;
|
|
cpc_ptr->cpc_regs[i-2].sys_mem_vaddr = addr;
|
|
}
|
|
} else if (gas_t->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
|
|
if (gas_t->access_width < 1 || gas_t->access_width > 3) {
|
|
/*
|
|
* 1 = 8-bit, 2 = 16-bit, and 3 = 32-bit.
|
|
* SystemIO doesn't implement 64-bit
|
|
* registers.
|
|
*/
|
|
pr_debug("Invalid access width %d for SystemIO register in _CPC\n",
|
|
gas_t->access_width);
|
|
goto out_free;
|
|
}
|
|
if (gas_t->address & OVER_16BTS_MASK) {
|
|
/* SystemIO registers use 16-bit integer addresses */
|
|
pr_debug("Invalid IO port %llu for SystemIO register in _CPC\n",
|
|
gas_t->address);
|
|
goto out_free;
|
|
}
|
|
if (!osc_cpc_flexible_adr_space_confirmed) {
|
|
pr_debug("Flexible address space capability not supported\n");
|
|
if (!cpc_supported_by_cpu())
|
|
goto out_free;
|
|
}
|
|
} else {
|
|
if (gas_t->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE || !cpc_ffh_supported()) {
|
|
/* Support only PCC, SystemMemory, SystemIO, and FFH type regs. */
|
|
pr_debug("Unsupported register type (%d) in _CPC\n",
|
|
gas_t->space_id);
|
|
goto out_free;
|
|
}
|
|
}
|
|
|
|
cpc_ptr->cpc_regs[i-2].type = ACPI_TYPE_BUFFER;
|
|
memcpy(&cpc_ptr->cpc_regs[i-2].cpc_entry.reg, gas_t, sizeof(*gas_t));
|
|
} else {
|
|
pr_debug("Invalid entry type (%d) in _CPC for CPU:%d\n",
|
|
i, pr->id);
|
|
goto out_free;
|
|
}
|
|
}
|
|
per_cpu(cpu_pcc_subspace_idx, pr->id) = pcc_subspace_id;
|
|
|
|
/*
|
|
* Initialize the remaining cpc_regs as unsupported.
|
|
* Example: In case FW exposes CPPC v2, the below loop will initialize
|
|
* LOWEST_FREQ and NOMINAL_FREQ regs as unsupported
|
|
*/
|
|
for (i = num_ent - 2; i < MAX_CPC_REG_ENT; i++) {
|
|
cpc_ptr->cpc_regs[i].type = ACPI_TYPE_INTEGER;
|
|
cpc_ptr->cpc_regs[i].cpc_entry.int_value = 0;
|
|
}
|
|
|
|
|
|
/* Store CPU Logical ID */
|
|
cpc_ptr->cpu_id = pr->id;
|
|
|
|
/* Parse PSD data for this CPU */
|
|
ret = acpi_get_psd(cpc_ptr, handle);
|
|
if (ret)
|
|
goto out_free;
|
|
|
|
/* Register PCC channel once for all PCC subspace ID. */
|
|
if (pcc_subspace_id >= 0 && !pcc_data[pcc_subspace_id]->pcc_channel_acquired) {
|
|
ret = register_pcc_channel(pcc_subspace_id);
|
|
if (ret)
|
|
goto out_free;
|
|
|
|
init_rwsem(&pcc_data[pcc_subspace_id]->pcc_lock);
|
|
init_waitqueue_head(&pcc_data[pcc_subspace_id]->pcc_write_wait_q);
|
|
}
|
|
|
|
/* Everything looks okay */
|
|
pr_debug("Parsed CPC struct for CPU: %d\n", pr->id);
|
|
|
|
/* Add per logical CPU nodes for reading its feedback counters. */
|
|
cpu_dev = get_cpu_device(pr->id);
|
|
if (!cpu_dev) {
|
|
ret = -EINVAL;
|
|
goto out_free;
|
|
}
|
|
|
|
/* Plug PSD data into this CPU's CPC descriptor. */
|
|
per_cpu(cpc_desc_ptr, pr->id) = cpc_ptr;
|
|
|
|
ret = kobject_init_and_add(&cpc_ptr->kobj, &cppc_ktype, &cpu_dev->kobj,
|
|
"acpi_cppc");
|
|
if (ret) {
|
|
per_cpu(cpc_desc_ptr, pr->id) = NULL;
|
|
kobject_put(&cpc_ptr->kobj);
|
|
goto out_free;
|
|
}
|
|
|
|
arch_init_invariance_cppc();
|
|
|
|
kfree(output.pointer);
|
|
return 0;
|
|
|
|
out_free:
|
|
/* Free all the mapped sys mem areas for this CPU */
|
|
for (i = 2; i < cpc_ptr->num_entries; i++) {
|
|
void __iomem *addr = cpc_ptr->cpc_regs[i-2].sys_mem_vaddr;
|
|
|
|
if (addr)
|
|
iounmap(addr);
|
|
}
|
|
kfree(cpc_ptr);
|
|
|
|
out_buf_free:
|
|
kfree(output.pointer);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_cppc_processor_probe);
|
|
|
|
/**
|
|
* acpi_cppc_processor_exit - Cleanup CPC structs.
|
|
* @pr: Ptr to acpi_processor containing this CPU's logical ID.
|
|
*
|
|
* Return: Void
|
|
*/
|
|
void acpi_cppc_processor_exit(struct acpi_processor *pr)
|
|
{
|
|
struct cpc_desc *cpc_ptr;
|
|
unsigned int i;
|
|
void __iomem *addr;
|
|
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, pr->id);
|
|
|
|
if (pcc_ss_id >= 0 && pcc_data[pcc_ss_id]) {
|
|
if (pcc_data[pcc_ss_id]->pcc_channel_acquired) {
|
|
pcc_data[pcc_ss_id]->refcount--;
|
|
if (!pcc_data[pcc_ss_id]->refcount) {
|
|
pcc_mbox_free_channel(pcc_data[pcc_ss_id]->pcc_channel);
|
|
kfree(pcc_data[pcc_ss_id]);
|
|
pcc_data[pcc_ss_id] = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
cpc_ptr = per_cpu(cpc_desc_ptr, pr->id);
|
|
if (!cpc_ptr)
|
|
return;
|
|
|
|
/* Free all the mapped sys mem areas for this CPU */
|
|
for (i = 2; i < cpc_ptr->num_entries; i++) {
|
|
addr = cpc_ptr->cpc_regs[i-2].sys_mem_vaddr;
|
|
if (addr)
|
|
iounmap(addr);
|
|
}
|
|
|
|
kobject_put(&cpc_ptr->kobj);
|
|
kfree(cpc_ptr);
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_cppc_processor_exit);
|
|
|
|
/**
|
|
* cpc_read_ffh() - Read FFH register
|
|
* @cpunum: CPU number to read
|
|
* @reg: cppc register information
|
|
* @val: place holder for return value
|
|
*
|
|
* Read bit_width bits from a specified address and bit_offset
|
|
*
|
|
* Return: 0 for success and error code
|
|
*/
|
|
int __weak cpc_read_ffh(int cpunum, struct cpc_reg *reg, u64 *val)
|
|
{
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
/**
|
|
* cpc_write_ffh() - Write FFH register
|
|
* @cpunum: CPU number to write
|
|
* @reg: cppc register information
|
|
* @val: value to write
|
|
*
|
|
* Write value of bit_width bits to a specified address and bit_offset
|
|
*
|
|
* Return: 0 for success and error code
|
|
*/
|
|
int __weak cpc_write_ffh(int cpunum, struct cpc_reg *reg, u64 val)
|
|
{
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
/*
|
|
* Since cpc_read and cpc_write are called while holding pcc_lock, it should be
|
|
* as fast as possible. We have already mapped the PCC subspace during init, so
|
|
* we can directly write to it.
|
|
*/
|
|
|
|
static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val)
|
|
{
|
|
void __iomem *vaddr = NULL;
|
|
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
|
|
struct cpc_reg *reg = ®_res->cpc_entry.reg;
|
|
|
|
if (reg_res->type == ACPI_TYPE_INTEGER) {
|
|
*val = reg_res->cpc_entry.int_value;
|
|
return 0;
|
|
}
|
|
|
|
*val = 0;
|
|
|
|
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
|
|
u32 width = 8 << (reg->access_width - 1);
|
|
u32 val_u32;
|
|
acpi_status status;
|
|
|
|
status = acpi_os_read_port((acpi_io_address)reg->address,
|
|
&val_u32, width);
|
|
if (ACPI_FAILURE(status)) {
|
|
pr_debug("Error: Failed to read SystemIO port %llx\n",
|
|
reg->address);
|
|
return -EFAULT;
|
|
}
|
|
|
|
*val = val_u32;
|
|
return 0;
|
|
} else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0)
|
|
vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id);
|
|
else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
|
|
vaddr = reg_res->sys_mem_vaddr;
|
|
else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE)
|
|
return cpc_read_ffh(cpu, reg, val);
|
|
else
|
|
return acpi_os_read_memory((acpi_physical_address)reg->address,
|
|
val, reg->bit_width);
|
|
|
|
switch (reg->bit_width) {
|
|
case 8:
|
|
*val = readb_relaxed(vaddr);
|
|
break;
|
|
case 16:
|
|
*val = readw_relaxed(vaddr);
|
|
break;
|
|
case 32:
|
|
*val = readl_relaxed(vaddr);
|
|
break;
|
|
case 64:
|
|
*val = readq_relaxed(vaddr);
|
|
break;
|
|
default:
|
|
pr_debug("Error: Cannot read %u bit width from PCC for ss: %d\n",
|
|
reg->bit_width, pcc_ss_id);
|
|
return -EFAULT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val)
|
|
{
|
|
int ret_val = 0;
|
|
void __iomem *vaddr = NULL;
|
|
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
|
|
struct cpc_reg *reg = ®_res->cpc_entry.reg;
|
|
|
|
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
|
|
u32 width = 8 << (reg->access_width - 1);
|
|
acpi_status status;
|
|
|
|
status = acpi_os_write_port((acpi_io_address)reg->address,
|
|
(u32)val, width);
|
|
if (ACPI_FAILURE(status)) {
|
|
pr_debug("Error: Failed to write SystemIO port %llx\n",
|
|
reg->address);
|
|
return -EFAULT;
|
|
}
|
|
|
|
return 0;
|
|
} else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0)
|
|
vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id);
|
|
else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
|
|
vaddr = reg_res->sys_mem_vaddr;
|
|
else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE)
|
|
return cpc_write_ffh(cpu, reg, val);
|
|
else
|
|
return acpi_os_write_memory((acpi_physical_address)reg->address,
|
|
val, reg->bit_width);
|
|
|
|
switch (reg->bit_width) {
|
|
case 8:
|
|
writeb_relaxed(val, vaddr);
|
|
break;
|
|
case 16:
|
|
writew_relaxed(val, vaddr);
|
|
break;
|
|
case 32:
|
|
writel_relaxed(val, vaddr);
|
|
break;
|
|
case 64:
|
|
writeq_relaxed(val, vaddr);
|
|
break;
|
|
default:
|
|
pr_debug("Error: Cannot write %u bit width to PCC for ss: %d\n",
|
|
reg->bit_width, pcc_ss_id);
|
|
ret_val = -EFAULT;
|
|
break;
|
|
}
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
static int cppc_get_perf(int cpunum, enum cppc_regs reg_idx, u64 *perf)
|
|
{
|
|
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
|
|
struct cpc_register_resource *reg;
|
|
|
|
if (!cpc_desc) {
|
|
pr_debug("No CPC descriptor for CPU:%d\n", cpunum);
|
|
return -ENODEV;
|
|
}
|
|
|
|
reg = &cpc_desc->cpc_regs[reg_idx];
|
|
|
|
if (CPC_IN_PCC(reg)) {
|
|
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum);
|
|
struct cppc_pcc_data *pcc_ss_data = NULL;
|
|
int ret = 0;
|
|
|
|
if (pcc_ss_id < 0)
|
|
return -EIO;
|
|
|
|
pcc_ss_data = pcc_data[pcc_ss_id];
|
|
|
|
down_write(&pcc_ss_data->pcc_lock);
|
|
|
|
if (send_pcc_cmd(pcc_ss_id, CMD_READ) >= 0)
|
|
cpc_read(cpunum, reg, perf);
|
|
else
|
|
ret = -EIO;
|
|
|
|
up_write(&pcc_ss_data->pcc_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
cpc_read(cpunum, reg, perf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* cppc_get_desired_perf - Get the desired performance register value.
|
|
* @cpunum: CPU from which to get desired performance.
|
|
* @desired_perf: Return address.
|
|
*
|
|
* Return: 0 for success, -EIO otherwise.
|
|
*/
|
|
int cppc_get_desired_perf(int cpunum, u64 *desired_perf)
|
|
{
|
|
return cppc_get_perf(cpunum, DESIRED_PERF, desired_perf);
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_get_desired_perf);
|
|
|
|
/**
|
|
* cppc_get_nominal_perf - Get the nominal performance register value.
|
|
* @cpunum: CPU from which to get nominal performance.
|
|
* @nominal_perf: Return address.
|
|
*
|
|
* Return: 0 for success, -EIO otherwise.
|
|
*/
|
|
int cppc_get_nominal_perf(int cpunum, u64 *nominal_perf)
|
|
{
|
|
return cppc_get_perf(cpunum, NOMINAL_PERF, nominal_perf);
|
|
}
|
|
|
|
/**
|
|
* cppc_get_perf_caps - Get a CPU's performance capabilities.
|
|
* @cpunum: CPU from which to get capabilities info.
|
|
* @perf_caps: ptr to cppc_perf_caps. See cppc_acpi.h
|
|
*
|
|
* Return: 0 for success with perf_caps populated else -ERRNO.
|
|
*/
|
|
int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps)
|
|
{
|
|
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
|
|
struct cpc_register_resource *highest_reg, *lowest_reg,
|
|
*lowest_non_linear_reg, *nominal_reg, *guaranteed_reg,
|
|
*low_freq_reg = NULL, *nom_freq_reg = NULL;
|
|
u64 high, low, guaranteed, nom, min_nonlinear, low_f = 0, nom_f = 0;
|
|
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum);
|
|
struct cppc_pcc_data *pcc_ss_data = NULL;
|
|
int ret = 0, regs_in_pcc = 0;
|
|
|
|
if (!cpc_desc) {
|
|
pr_debug("No CPC descriptor for CPU:%d\n", cpunum);
|
|
return -ENODEV;
|
|
}
|
|
|
|
highest_reg = &cpc_desc->cpc_regs[HIGHEST_PERF];
|
|
lowest_reg = &cpc_desc->cpc_regs[LOWEST_PERF];
|
|
lowest_non_linear_reg = &cpc_desc->cpc_regs[LOW_NON_LINEAR_PERF];
|
|
nominal_reg = &cpc_desc->cpc_regs[NOMINAL_PERF];
|
|
low_freq_reg = &cpc_desc->cpc_regs[LOWEST_FREQ];
|
|
nom_freq_reg = &cpc_desc->cpc_regs[NOMINAL_FREQ];
|
|
guaranteed_reg = &cpc_desc->cpc_regs[GUARANTEED_PERF];
|
|
|
|
/* Are any of the regs PCC ?*/
|
|
if (CPC_IN_PCC(highest_reg) || CPC_IN_PCC(lowest_reg) ||
|
|
CPC_IN_PCC(lowest_non_linear_reg) || CPC_IN_PCC(nominal_reg) ||
|
|
CPC_IN_PCC(low_freq_reg) || CPC_IN_PCC(nom_freq_reg)) {
|
|
if (pcc_ss_id < 0) {
|
|
pr_debug("Invalid pcc_ss_id\n");
|
|
return -ENODEV;
|
|
}
|
|
pcc_ss_data = pcc_data[pcc_ss_id];
|
|
regs_in_pcc = 1;
|
|
down_write(&pcc_ss_data->pcc_lock);
|
|
/* Ring doorbell once to update PCC subspace */
|
|
if (send_pcc_cmd(pcc_ss_id, CMD_READ) < 0) {
|
|
ret = -EIO;
|
|
goto out_err;
|
|
}
|
|
}
|
|
|
|
cpc_read(cpunum, highest_reg, &high);
|
|
perf_caps->highest_perf = high;
|
|
|
|
cpc_read(cpunum, lowest_reg, &low);
|
|
perf_caps->lowest_perf = low;
|
|
|
|
cpc_read(cpunum, nominal_reg, &nom);
|
|
perf_caps->nominal_perf = nom;
|
|
|
|
if (guaranteed_reg->type != ACPI_TYPE_BUFFER ||
|
|
IS_NULL_REG(&guaranteed_reg->cpc_entry.reg)) {
|
|
perf_caps->guaranteed_perf = 0;
|
|
} else {
|
|
cpc_read(cpunum, guaranteed_reg, &guaranteed);
|
|
perf_caps->guaranteed_perf = guaranteed;
|
|
}
|
|
|
|
cpc_read(cpunum, lowest_non_linear_reg, &min_nonlinear);
|
|
perf_caps->lowest_nonlinear_perf = min_nonlinear;
|
|
|
|
if (!high || !low || !nom || !min_nonlinear)
|
|
ret = -EFAULT;
|
|
|
|
/* Read optional lowest and nominal frequencies if present */
|
|
if (CPC_SUPPORTED(low_freq_reg))
|
|
cpc_read(cpunum, low_freq_reg, &low_f);
|
|
|
|
if (CPC_SUPPORTED(nom_freq_reg))
|
|
cpc_read(cpunum, nom_freq_reg, &nom_f);
|
|
|
|
perf_caps->lowest_freq = low_f;
|
|
perf_caps->nominal_freq = nom_f;
|
|
|
|
|
|
out_err:
|
|
if (regs_in_pcc)
|
|
up_write(&pcc_ss_data->pcc_lock);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_get_perf_caps);
|
|
|
|
/**
|
|
* cppc_perf_ctrs_in_pcc - Check if any perf counters are in a PCC region.
|
|
*
|
|
* CPPC has flexibility about how CPU performance counters are accessed.
|
|
* One of the choices is PCC regions, which can have a high access latency. This
|
|
* routine allows callers of cppc_get_perf_ctrs() to know this ahead of time.
|
|
*
|
|
* Return: true if any of the counters are in PCC regions, false otherwise
|
|
*/
|
|
bool cppc_perf_ctrs_in_pcc(void)
|
|
{
|
|
int cpu;
|
|
|
|
for_each_present_cpu(cpu) {
|
|
struct cpc_register_resource *ref_perf_reg;
|
|
struct cpc_desc *cpc_desc;
|
|
|
|
cpc_desc = per_cpu(cpc_desc_ptr, cpu);
|
|
|
|
if (CPC_IN_PCC(&cpc_desc->cpc_regs[DELIVERED_CTR]) ||
|
|
CPC_IN_PCC(&cpc_desc->cpc_regs[REFERENCE_CTR]) ||
|
|
CPC_IN_PCC(&cpc_desc->cpc_regs[CTR_WRAP_TIME]))
|
|
return true;
|
|
|
|
|
|
ref_perf_reg = &cpc_desc->cpc_regs[REFERENCE_PERF];
|
|
|
|
/*
|
|
* If reference perf register is not supported then we should
|
|
* use the nominal perf value
|
|
*/
|
|
if (!CPC_SUPPORTED(ref_perf_reg))
|
|
ref_perf_reg = &cpc_desc->cpc_regs[NOMINAL_PERF];
|
|
|
|
if (CPC_IN_PCC(ref_perf_reg))
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_perf_ctrs_in_pcc);
|
|
|
|
/**
|
|
* cppc_get_perf_ctrs - Read a CPU's performance feedback counters.
|
|
* @cpunum: CPU from which to read counters.
|
|
* @perf_fb_ctrs: ptr to cppc_perf_fb_ctrs. See cppc_acpi.h
|
|
*
|
|
* Return: 0 for success with perf_fb_ctrs populated else -ERRNO.
|
|
*/
|
|
int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs)
|
|
{
|
|
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
|
|
struct cpc_register_resource *delivered_reg, *reference_reg,
|
|
*ref_perf_reg, *ctr_wrap_reg;
|
|
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum);
|
|
struct cppc_pcc_data *pcc_ss_data = NULL;
|
|
u64 delivered, reference, ref_perf, ctr_wrap_time;
|
|
int ret = 0, regs_in_pcc = 0;
|
|
|
|
if (!cpc_desc) {
|
|
pr_debug("No CPC descriptor for CPU:%d\n", cpunum);
|
|
return -ENODEV;
|
|
}
|
|
|
|
delivered_reg = &cpc_desc->cpc_regs[DELIVERED_CTR];
|
|
reference_reg = &cpc_desc->cpc_regs[REFERENCE_CTR];
|
|
ref_perf_reg = &cpc_desc->cpc_regs[REFERENCE_PERF];
|
|
ctr_wrap_reg = &cpc_desc->cpc_regs[CTR_WRAP_TIME];
|
|
|
|
/*
|
|
* If reference perf register is not supported then we should
|
|
* use the nominal perf value
|
|
*/
|
|
if (!CPC_SUPPORTED(ref_perf_reg))
|
|
ref_perf_reg = &cpc_desc->cpc_regs[NOMINAL_PERF];
|
|
|
|
/* Are any of the regs PCC ?*/
|
|
if (CPC_IN_PCC(delivered_reg) || CPC_IN_PCC(reference_reg) ||
|
|
CPC_IN_PCC(ctr_wrap_reg) || CPC_IN_PCC(ref_perf_reg)) {
|
|
if (pcc_ss_id < 0) {
|
|
pr_debug("Invalid pcc_ss_id\n");
|
|
return -ENODEV;
|
|
}
|
|
pcc_ss_data = pcc_data[pcc_ss_id];
|
|
down_write(&pcc_ss_data->pcc_lock);
|
|
regs_in_pcc = 1;
|
|
/* Ring doorbell once to update PCC subspace */
|
|
if (send_pcc_cmd(pcc_ss_id, CMD_READ) < 0) {
|
|
ret = -EIO;
|
|
goto out_err;
|
|
}
|
|
}
|
|
|
|
cpc_read(cpunum, delivered_reg, &delivered);
|
|
cpc_read(cpunum, reference_reg, &reference);
|
|
cpc_read(cpunum, ref_perf_reg, &ref_perf);
|
|
|
|
/*
|
|
* Per spec, if ctr_wrap_time optional register is unsupported, then the
|
|
* performance counters are assumed to never wrap during the lifetime of
|
|
* platform
|
|
*/
|
|
ctr_wrap_time = (u64)(~((u64)0));
|
|
if (CPC_SUPPORTED(ctr_wrap_reg))
|
|
cpc_read(cpunum, ctr_wrap_reg, &ctr_wrap_time);
|
|
|
|
if (!delivered || !reference || !ref_perf) {
|
|
ret = -EFAULT;
|
|
goto out_err;
|
|
}
|
|
|
|
perf_fb_ctrs->delivered = delivered;
|
|
perf_fb_ctrs->reference = reference;
|
|
perf_fb_ctrs->reference_perf = ref_perf;
|
|
perf_fb_ctrs->wraparound_time = ctr_wrap_time;
|
|
out_err:
|
|
if (regs_in_pcc)
|
|
up_write(&pcc_ss_data->pcc_lock);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_get_perf_ctrs);
|
|
|
|
/**
|
|
* cppc_set_enable - Set to enable CPPC on the processor by writing the
|
|
* Continuous Performance Control package EnableRegister field.
|
|
* @cpu: CPU for which to enable CPPC register.
|
|
* @enable: 0 - disable, 1 - enable CPPC feature on the processor.
|
|
*
|
|
* Return: 0 for success, -ERRNO or -EIO otherwise.
|
|
*/
|
|
int cppc_set_enable(int cpu, bool enable)
|
|
{
|
|
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
|
|
struct cpc_register_resource *enable_reg;
|
|
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
|
|
struct cppc_pcc_data *pcc_ss_data = NULL;
|
|
int ret = -EINVAL;
|
|
|
|
if (!cpc_desc) {
|
|
pr_debug("No CPC descriptor for CPU:%d\n", cpu);
|
|
return -EINVAL;
|
|
}
|
|
|
|
enable_reg = &cpc_desc->cpc_regs[ENABLE];
|
|
|
|
if (CPC_IN_PCC(enable_reg)) {
|
|
|
|
if (pcc_ss_id < 0)
|
|
return -EIO;
|
|
|
|
ret = cpc_write(cpu, enable_reg, enable);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pcc_ss_data = pcc_data[pcc_ss_id];
|
|
|
|
down_write(&pcc_ss_data->pcc_lock);
|
|
/* after writing CPC, transfer the ownership of PCC to platfrom */
|
|
ret = send_pcc_cmd(pcc_ss_id, CMD_WRITE);
|
|
up_write(&pcc_ss_data->pcc_lock);
|
|
return ret;
|
|
}
|
|
|
|
return cpc_write(cpu, enable_reg, enable);
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_set_enable);
|
|
|
|
/**
|
|
* cppc_set_perf - Set a CPU's performance controls.
|
|
* @cpu: CPU for which to set performance controls.
|
|
* @perf_ctrls: ptr to cppc_perf_ctrls. See cppc_acpi.h
|
|
*
|
|
* Return: 0 for success, -ERRNO otherwise.
|
|
*/
|
|
int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
|
|
{
|
|
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
|
|
struct cpc_register_resource *desired_reg;
|
|
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
|
|
struct cppc_pcc_data *pcc_ss_data = NULL;
|
|
int ret = 0;
|
|
|
|
if (!cpc_desc) {
|
|
pr_debug("No CPC descriptor for CPU:%d\n", cpu);
|
|
return -ENODEV;
|
|
}
|
|
|
|
desired_reg = &cpc_desc->cpc_regs[DESIRED_PERF];
|
|
|
|
/*
|
|
* This is Phase-I where we want to write to CPC registers
|
|
* -> We want all CPUs to be able to execute this phase in parallel
|
|
*
|
|
* Since read_lock can be acquired by multiple CPUs simultaneously we
|
|
* achieve that goal here
|
|
*/
|
|
if (CPC_IN_PCC(desired_reg)) {
|
|
if (pcc_ss_id < 0) {
|
|
pr_debug("Invalid pcc_ss_id\n");
|
|
return -ENODEV;
|
|
}
|
|
pcc_ss_data = pcc_data[pcc_ss_id];
|
|
down_read(&pcc_ss_data->pcc_lock); /* BEGIN Phase-I */
|
|
if (pcc_ss_data->platform_owns_pcc) {
|
|
ret = check_pcc_chan(pcc_ss_id, false);
|
|
if (ret) {
|
|
up_read(&pcc_ss_data->pcc_lock);
|
|
return ret;
|
|
}
|
|
}
|
|
/*
|
|
* Update the pending_write to make sure a PCC CMD_READ will not
|
|
* arrive and steal the channel during the switch to write lock
|
|
*/
|
|
pcc_ss_data->pending_pcc_write_cmd = true;
|
|
cpc_desc->write_cmd_id = pcc_ss_data->pcc_write_cnt;
|
|
cpc_desc->write_cmd_status = 0;
|
|
}
|
|
|
|
/*
|
|
* Skip writing MIN/MAX until Linux knows how to come up with
|
|
* useful values.
|
|
*/
|
|
cpc_write(cpu, desired_reg, perf_ctrls->desired_perf);
|
|
|
|
if (CPC_IN_PCC(desired_reg))
|
|
up_read(&pcc_ss_data->pcc_lock); /* END Phase-I */
|
|
/*
|
|
* This is Phase-II where we transfer the ownership of PCC to Platform
|
|
*
|
|
* Short Summary: Basically if we think of a group of cppc_set_perf
|
|
* requests that happened in short overlapping interval. The last CPU to
|
|
* come out of Phase-I will enter Phase-II and ring the doorbell.
|
|
*
|
|
* We have the following requirements for Phase-II:
|
|
* 1. We want to execute Phase-II only when there are no CPUs
|
|
* currently executing in Phase-I
|
|
* 2. Once we start Phase-II we want to avoid all other CPUs from
|
|
* entering Phase-I.
|
|
* 3. We want only one CPU among all those who went through Phase-I
|
|
* to run phase-II
|
|
*
|
|
* If write_trylock fails to get the lock and doesn't transfer the
|
|
* PCC ownership to the platform, then one of the following will be TRUE
|
|
* 1. There is at-least one CPU in Phase-I which will later execute
|
|
* write_trylock, so the CPUs in Phase-I will be responsible for
|
|
* executing the Phase-II.
|
|
* 2. Some other CPU has beaten this CPU to successfully execute the
|
|
* write_trylock and has already acquired the write_lock. We know for a
|
|
* fact it (other CPU acquiring the write_lock) couldn't have happened
|
|
* before this CPU's Phase-I as we held the read_lock.
|
|
* 3. Some other CPU executing pcc CMD_READ has stolen the
|
|
* down_write, in which case, send_pcc_cmd will check for pending
|
|
* CMD_WRITE commands by checking the pending_pcc_write_cmd.
|
|
* So this CPU can be certain that its request will be delivered
|
|
* So in all cases, this CPU knows that its request will be delivered
|
|
* by another CPU and can return
|
|
*
|
|
* After getting the down_write we still need to check for
|
|
* pending_pcc_write_cmd to take care of the following scenario
|
|
* The thread running this code could be scheduled out between
|
|
* Phase-I and Phase-II. Before it is scheduled back on, another CPU
|
|
* could have delivered the request to Platform by triggering the
|
|
* doorbell and transferred the ownership of PCC to platform. So this
|
|
* avoids triggering an unnecessary doorbell and more importantly before
|
|
* triggering the doorbell it makes sure that the PCC channel ownership
|
|
* is still with OSPM.
|
|
* pending_pcc_write_cmd can also be cleared by a different CPU, if
|
|
* there was a pcc CMD_READ waiting on down_write and it steals the lock
|
|
* before the pcc CMD_WRITE is completed. send_pcc_cmd checks for this
|
|
* case during a CMD_READ and if there are pending writes it delivers
|
|
* the write command before servicing the read command
|
|
*/
|
|
if (CPC_IN_PCC(desired_reg)) {
|
|
if (down_write_trylock(&pcc_ss_data->pcc_lock)) {/* BEGIN Phase-II */
|
|
/* Update only if there are pending write commands */
|
|
if (pcc_ss_data->pending_pcc_write_cmd)
|
|
send_pcc_cmd(pcc_ss_id, CMD_WRITE);
|
|
up_write(&pcc_ss_data->pcc_lock); /* END Phase-II */
|
|
} else
|
|
/* Wait until pcc_write_cnt is updated by send_pcc_cmd */
|
|
wait_event(pcc_ss_data->pcc_write_wait_q,
|
|
cpc_desc->write_cmd_id != pcc_ss_data->pcc_write_cnt);
|
|
|
|
/* send_pcc_cmd updates the status in case of failure */
|
|
ret = cpc_desc->write_cmd_status;
|
|
}
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_set_perf);
|
|
|
|
/**
|
|
* cppc_get_transition_latency - returns frequency transition latency in ns
|
|
*
|
|
* ACPI CPPC does not explicitly specify how a platform can specify the
|
|
* transition latency for performance change requests. The closest we have
|
|
* is the timing information from the PCCT tables which provides the info
|
|
* on the number and frequency of PCC commands the platform can handle.
|
|
*
|
|
* If desired_reg is in the SystemMemory or SystemIo ACPI address space,
|
|
* then assume there is no latency.
|
|
*/
|
|
unsigned int cppc_get_transition_latency(int cpu_num)
|
|
{
|
|
/*
|
|
* Expected transition latency is based on the PCCT timing values
|
|
* Below are definition from ACPI spec:
|
|
* pcc_nominal- Expected latency to process a command, in microseconds
|
|
* pcc_mpar - The maximum number of periodic requests that the subspace
|
|
* channel can support, reported in commands per minute. 0
|
|
* indicates no limitation.
|
|
* pcc_mrtt - The minimum amount of time that OSPM must wait after the
|
|
* completion of a command before issuing the next command,
|
|
* in microseconds.
|
|
*/
|
|
unsigned int latency_ns = 0;
|
|
struct cpc_desc *cpc_desc;
|
|
struct cpc_register_resource *desired_reg;
|
|
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu_num);
|
|
struct cppc_pcc_data *pcc_ss_data;
|
|
|
|
cpc_desc = per_cpu(cpc_desc_ptr, cpu_num);
|
|
if (!cpc_desc)
|
|
return CPUFREQ_ETERNAL;
|
|
|
|
desired_reg = &cpc_desc->cpc_regs[DESIRED_PERF];
|
|
if (CPC_IN_SYSTEM_MEMORY(desired_reg) || CPC_IN_SYSTEM_IO(desired_reg))
|
|
return 0;
|
|
else if (!CPC_IN_PCC(desired_reg))
|
|
return CPUFREQ_ETERNAL;
|
|
|
|
if (pcc_ss_id < 0)
|
|
return CPUFREQ_ETERNAL;
|
|
|
|
pcc_ss_data = pcc_data[pcc_ss_id];
|
|
if (pcc_ss_data->pcc_mpar)
|
|
latency_ns = 60 * (1000 * 1000 * 1000 / pcc_ss_data->pcc_mpar);
|
|
|
|
latency_ns = max(latency_ns, pcc_ss_data->pcc_nominal * 1000);
|
|
latency_ns = max(latency_ns, pcc_ss_data->pcc_mrtt * 1000);
|
|
|
|
return latency_ns;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_get_transition_latency);
|