mirror of
https://github.com/torvalds/linux.git
synced 2024-11-27 22:51:35 +00:00
3b59bf0816
Pull networking merge from David Miller: "1) Move ixgbe driver over to purely page based buffering on receive. From Alexander Duyck. 2) Add receive packet steering support to e1000e, from Bruce Allan. 3) Convert TCP MD5 support over to RCU, from Eric Dumazet. 4) Reduce cpu usage in handling out-of-order TCP packets on modern systems, also from Eric Dumazet. 5) Support the IP{,V6}_UNICAST_IF socket options, making the wine folks happy, from Erich Hoover. 6) Support VLAN trunking from guests in hyperv driver, from Haiyang Zhang. 7) Support byte-queue-limtis in r8169, from Igor Maravic. 8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but was never properly implemented, Jiri Benc fixed that. 9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang. 10) Support kernel side dump filtering by ctmark in netfilter ctnetlink, from Pablo Neira Ayuso. 11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker. 12) Add new peek socket options to assist with socket migration, from Pavel Emelyanov. 13) Add sch_plug packet scheduler whose queue is controlled by userland daemons using explicit freeze and release commands. From Shriram Rajagopalan. 14) Fix FCOE checksum offload handling on transmit, from Yi Zou." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits) Fix pppol2tp getsockname() Remove printk from rds_sendmsg ipv6: fix incorrent ipv6 ipsec packet fragment cpsw: Hook up default ndo_change_mtu. net: qmi_wwan: fix build error due to cdc-wdm dependecy netdev: driver: ethernet: Add TI CPSW driver netdev: driver: ethernet: add cpsw address lookup engine support phy: add am79c874 PHY support mlx4_core: fix race on comm channel bonding: send igmp report for its master fs_enet: Add MPC5125 FEC support and PHY interface selection net: bpf_jit: fix BPF_S_LDX_B_MSH compilation net: update the usage of CHECKSUM_UNNECESSARY fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso ixgbe: Fix issues with SR-IOV loopback when flow control is disabled net/hyperv: Fix the code handling tx busy ixgbe: fix namespace issues when FCoE/DCB is not enabled rtlwifi: Remove unused ETH_ADDR_LEN defines igbvf: Use ETH_ALEN ... Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.
1472 lines
33 KiB
C
1472 lines
33 KiB
C
/*
|
|
* Sonics Silicon Backplane
|
|
* Subsystem core
|
|
*
|
|
* Copyright 2005, Broadcom Corporation
|
|
* Copyright 2006, 2007, Michael Buesch <m@bues.ch>
|
|
*
|
|
* Licensed under the GNU/GPL. See COPYING for details.
|
|
*/
|
|
|
|
#include "ssb_private.h"
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/ssb/ssb.h>
|
|
#include <linux/ssb/ssb_regs.h>
|
|
#include <linux/ssb/ssb_driver_gige.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/mmc/sdio_func.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <pcmcia/cistpl.h>
|
|
#include <pcmcia/ds.h>
|
|
|
|
|
|
MODULE_DESCRIPTION("Sonics Silicon Backplane driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
/* Temporary list of yet-to-be-attached buses */
|
|
static LIST_HEAD(attach_queue);
|
|
/* List if running buses */
|
|
static LIST_HEAD(buses);
|
|
/* Software ID counter */
|
|
static unsigned int next_busnumber;
|
|
/* buses_mutes locks the two buslists and the next_busnumber.
|
|
* Don't lock this directly, but use ssb_buses_[un]lock() below. */
|
|
static DEFINE_MUTEX(buses_mutex);
|
|
|
|
/* There are differences in the codeflow, if the bus is
|
|
* initialized from early boot, as various needed services
|
|
* are not available early. This is a mechanism to delay
|
|
* these initializations to after early boot has finished.
|
|
* It's also used to avoid mutex locking, as that's not
|
|
* available and needed early. */
|
|
static bool ssb_is_early_boot = 1;
|
|
|
|
static void ssb_buses_lock(void);
|
|
static void ssb_buses_unlock(void);
|
|
|
|
|
|
#ifdef CONFIG_SSB_PCIHOST
|
|
struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev)
|
|
{
|
|
struct ssb_bus *bus;
|
|
|
|
ssb_buses_lock();
|
|
list_for_each_entry(bus, &buses, list) {
|
|
if (bus->bustype == SSB_BUSTYPE_PCI &&
|
|
bus->host_pci == pdev)
|
|
goto found;
|
|
}
|
|
bus = NULL;
|
|
found:
|
|
ssb_buses_unlock();
|
|
|
|
return bus;
|
|
}
|
|
#endif /* CONFIG_SSB_PCIHOST */
|
|
|
|
#ifdef CONFIG_SSB_PCMCIAHOST
|
|
struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev)
|
|
{
|
|
struct ssb_bus *bus;
|
|
|
|
ssb_buses_lock();
|
|
list_for_each_entry(bus, &buses, list) {
|
|
if (bus->bustype == SSB_BUSTYPE_PCMCIA &&
|
|
bus->host_pcmcia == pdev)
|
|
goto found;
|
|
}
|
|
bus = NULL;
|
|
found:
|
|
ssb_buses_unlock();
|
|
|
|
return bus;
|
|
}
|
|
#endif /* CONFIG_SSB_PCMCIAHOST */
|
|
|
|
#ifdef CONFIG_SSB_SDIOHOST
|
|
struct ssb_bus *ssb_sdio_func_to_bus(struct sdio_func *func)
|
|
{
|
|
struct ssb_bus *bus;
|
|
|
|
ssb_buses_lock();
|
|
list_for_each_entry(bus, &buses, list) {
|
|
if (bus->bustype == SSB_BUSTYPE_SDIO &&
|
|
bus->host_sdio == func)
|
|
goto found;
|
|
}
|
|
bus = NULL;
|
|
found:
|
|
ssb_buses_unlock();
|
|
|
|
return bus;
|
|
}
|
|
#endif /* CONFIG_SSB_SDIOHOST */
|
|
|
|
int ssb_for_each_bus_call(unsigned long data,
|
|
int (*func)(struct ssb_bus *bus, unsigned long data))
|
|
{
|
|
struct ssb_bus *bus;
|
|
int res;
|
|
|
|
ssb_buses_lock();
|
|
list_for_each_entry(bus, &buses, list) {
|
|
res = func(bus, data);
|
|
if (res >= 0) {
|
|
ssb_buses_unlock();
|
|
return res;
|
|
}
|
|
}
|
|
ssb_buses_unlock();
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
static struct ssb_device *ssb_device_get(struct ssb_device *dev)
|
|
{
|
|
if (dev)
|
|
get_device(dev->dev);
|
|
return dev;
|
|
}
|
|
|
|
static void ssb_device_put(struct ssb_device *dev)
|
|
{
|
|
if (dev)
|
|
put_device(dev->dev);
|
|
}
|
|
|
|
static int ssb_device_resume(struct device *dev)
|
|
{
|
|
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
|
|
struct ssb_driver *ssb_drv;
|
|
int err = 0;
|
|
|
|
if (dev->driver) {
|
|
ssb_drv = drv_to_ssb_drv(dev->driver);
|
|
if (ssb_drv && ssb_drv->resume)
|
|
err = ssb_drv->resume(ssb_dev);
|
|
if (err)
|
|
goto out;
|
|
}
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int ssb_device_suspend(struct device *dev, pm_message_t state)
|
|
{
|
|
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
|
|
struct ssb_driver *ssb_drv;
|
|
int err = 0;
|
|
|
|
if (dev->driver) {
|
|
ssb_drv = drv_to_ssb_drv(dev->driver);
|
|
if (ssb_drv && ssb_drv->suspend)
|
|
err = ssb_drv->suspend(ssb_dev, state);
|
|
if (err)
|
|
goto out;
|
|
}
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
int ssb_bus_resume(struct ssb_bus *bus)
|
|
{
|
|
int err;
|
|
|
|
/* Reset HW state information in memory, so that HW is
|
|
* completely reinitialized. */
|
|
bus->mapped_device = NULL;
|
|
#ifdef CONFIG_SSB_DRIVER_PCICORE
|
|
bus->pcicore.setup_done = 0;
|
|
#endif
|
|
|
|
err = ssb_bus_powerup(bus, 0);
|
|
if (err)
|
|
return err;
|
|
err = ssb_pcmcia_hardware_setup(bus);
|
|
if (err) {
|
|
ssb_bus_may_powerdown(bus);
|
|
return err;
|
|
}
|
|
ssb_chipco_resume(&bus->chipco);
|
|
ssb_bus_may_powerdown(bus);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(ssb_bus_resume);
|
|
|
|
int ssb_bus_suspend(struct ssb_bus *bus)
|
|
{
|
|
ssb_chipco_suspend(&bus->chipco);
|
|
ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(ssb_bus_suspend);
|
|
|
|
#ifdef CONFIG_SSB_SPROM
|
|
/** ssb_devices_freeze - Freeze all devices on the bus.
|
|
*
|
|
* After freezing no device driver will be handling a device
|
|
* on this bus anymore. ssb_devices_thaw() must be called after
|
|
* a successful freeze to reactivate the devices.
|
|
*
|
|
* @bus: The bus.
|
|
* @ctx: Context structure. Pass this to ssb_devices_thaw().
|
|
*/
|
|
int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx)
|
|
{
|
|
struct ssb_device *sdev;
|
|
struct ssb_driver *sdrv;
|
|
unsigned int i;
|
|
|
|
memset(ctx, 0, sizeof(*ctx));
|
|
ctx->bus = bus;
|
|
SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen));
|
|
|
|
for (i = 0; i < bus->nr_devices; i++) {
|
|
sdev = ssb_device_get(&bus->devices[i]);
|
|
|
|
if (!sdev->dev || !sdev->dev->driver ||
|
|
!device_is_registered(sdev->dev)) {
|
|
ssb_device_put(sdev);
|
|
continue;
|
|
}
|
|
sdrv = drv_to_ssb_drv(sdev->dev->driver);
|
|
if (SSB_WARN_ON(!sdrv->remove))
|
|
continue;
|
|
sdrv->remove(sdev);
|
|
ctx->device_frozen[i] = 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/** ssb_devices_thaw - Unfreeze all devices on the bus.
|
|
*
|
|
* This will re-attach the device drivers and re-init the devices.
|
|
*
|
|
* @ctx: The context structure from ssb_devices_freeze()
|
|
*/
|
|
int ssb_devices_thaw(struct ssb_freeze_context *ctx)
|
|
{
|
|
struct ssb_bus *bus = ctx->bus;
|
|
struct ssb_device *sdev;
|
|
struct ssb_driver *sdrv;
|
|
unsigned int i;
|
|
int err, result = 0;
|
|
|
|
for (i = 0; i < bus->nr_devices; i++) {
|
|
if (!ctx->device_frozen[i])
|
|
continue;
|
|
sdev = &bus->devices[i];
|
|
|
|
if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver))
|
|
continue;
|
|
sdrv = drv_to_ssb_drv(sdev->dev->driver);
|
|
if (SSB_WARN_ON(!sdrv || !sdrv->probe))
|
|
continue;
|
|
|
|
err = sdrv->probe(sdev, &sdev->id);
|
|
if (err) {
|
|
ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
|
|
dev_name(sdev->dev));
|
|
result = err;
|
|
}
|
|
ssb_device_put(sdev);
|
|
}
|
|
|
|
return result;
|
|
}
|
|
#endif /* CONFIG_SSB_SPROM */
|
|
|
|
static void ssb_device_shutdown(struct device *dev)
|
|
{
|
|
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
|
|
struct ssb_driver *ssb_drv;
|
|
|
|
if (!dev->driver)
|
|
return;
|
|
ssb_drv = drv_to_ssb_drv(dev->driver);
|
|
if (ssb_drv && ssb_drv->shutdown)
|
|
ssb_drv->shutdown(ssb_dev);
|
|
}
|
|
|
|
static int ssb_device_remove(struct device *dev)
|
|
{
|
|
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
|
|
struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
|
|
|
|
if (ssb_drv && ssb_drv->remove)
|
|
ssb_drv->remove(ssb_dev);
|
|
ssb_device_put(ssb_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ssb_device_probe(struct device *dev)
|
|
{
|
|
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
|
|
struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
|
|
int err = 0;
|
|
|
|
ssb_device_get(ssb_dev);
|
|
if (ssb_drv && ssb_drv->probe)
|
|
err = ssb_drv->probe(ssb_dev, &ssb_dev->id);
|
|
if (err)
|
|
ssb_device_put(ssb_dev);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int ssb_match_devid(const struct ssb_device_id *tabid,
|
|
const struct ssb_device_id *devid)
|
|
{
|
|
if ((tabid->vendor != devid->vendor) &&
|
|
tabid->vendor != SSB_ANY_VENDOR)
|
|
return 0;
|
|
if ((tabid->coreid != devid->coreid) &&
|
|
tabid->coreid != SSB_ANY_ID)
|
|
return 0;
|
|
if ((tabid->revision != devid->revision) &&
|
|
tabid->revision != SSB_ANY_REV)
|
|
return 0;
|
|
return 1;
|
|
}
|
|
|
|
static int ssb_bus_match(struct device *dev, struct device_driver *drv)
|
|
{
|
|
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
|
|
struct ssb_driver *ssb_drv = drv_to_ssb_drv(drv);
|
|
const struct ssb_device_id *id;
|
|
|
|
for (id = ssb_drv->id_table;
|
|
id->vendor || id->coreid || id->revision;
|
|
id++) {
|
|
if (ssb_match_devid(id, &ssb_dev->id))
|
|
return 1; /* found */
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ssb_device_uevent(struct device *dev, struct kobj_uevent_env *env)
|
|
{
|
|
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
|
|
|
|
if (!dev)
|
|
return -ENODEV;
|
|
|
|
return add_uevent_var(env,
|
|
"MODALIAS=ssb:v%04Xid%04Xrev%02X",
|
|
ssb_dev->id.vendor, ssb_dev->id.coreid,
|
|
ssb_dev->id.revision);
|
|
}
|
|
|
|
#define ssb_config_attr(attrib, field, format_string) \
|
|
static ssize_t \
|
|
attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \
|
|
}
|
|
|
|
ssb_config_attr(core_num, core_index, "%u\n")
|
|
ssb_config_attr(coreid, id.coreid, "0x%04x\n")
|
|
ssb_config_attr(vendor, id.vendor, "0x%04x\n")
|
|
ssb_config_attr(revision, id.revision, "%u\n")
|
|
ssb_config_attr(irq, irq, "%u\n")
|
|
static ssize_t
|
|
name_show(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
return sprintf(buf, "%s\n",
|
|
ssb_core_name(dev_to_ssb_dev(dev)->id.coreid));
|
|
}
|
|
|
|
static struct device_attribute ssb_device_attrs[] = {
|
|
__ATTR_RO(name),
|
|
__ATTR_RO(core_num),
|
|
__ATTR_RO(coreid),
|
|
__ATTR_RO(vendor),
|
|
__ATTR_RO(revision),
|
|
__ATTR_RO(irq),
|
|
__ATTR_NULL,
|
|
};
|
|
|
|
static struct bus_type ssb_bustype = {
|
|
.name = "ssb",
|
|
.match = ssb_bus_match,
|
|
.probe = ssb_device_probe,
|
|
.remove = ssb_device_remove,
|
|
.shutdown = ssb_device_shutdown,
|
|
.suspend = ssb_device_suspend,
|
|
.resume = ssb_device_resume,
|
|
.uevent = ssb_device_uevent,
|
|
.dev_attrs = ssb_device_attrs,
|
|
};
|
|
|
|
static void ssb_buses_lock(void)
|
|
{
|
|
/* See the comment at the ssb_is_early_boot definition */
|
|
if (!ssb_is_early_boot)
|
|
mutex_lock(&buses_mutex);
|
|
}
|
|
|
|
static void ssb_buses_unlock(void)
|
|
{
|
|
/* See the comment at the ssb_is_early_boot definition */
|
|
if (!ssb_is_early_boot)
|
|
mutex_unlock(&buses_mutex);
|
|
}
|
|
|
|
static void ssb_devices_unregister(struct ssb_bus *bus)
|
|
{
|
|
struct ssb_device *sdev;
|
|
int i;
|
|
|
|
for (i = bus->nr_devices - 1; i >= 0; i--) {
|
|
sdev = &(bus->devices[i]);
|
|
if (sdev->dev)
|
|
device_unregister(sdev->dev);
|
|
}
|
|
}
|
|
|
|
void ssb_bus_unregister(struct ssb_bus *bus)
|
|
{
|
|
ssb_buses_lock();
|
|
ssb_devices_unregister(bus);
|
|
list_del(&bus->list);
|
|
ssb_buses_unlock();
|
|
|
|
ssb_pcmcia_exit(bus);
|
|
ssb_pci_exit(bus);
|
|
ssb_iounmap(bus);
|
|
}
|
|
EXPORT_SYMBOL(ssb_bus_unregister);
|
|
|
|
static void ssb_release_dev(struct device *dev)
|
|
{
|
|
struct __ssb_dev_wrapper *devwrap;
|
|
|
|
devwrap = container_of(dev, struct __ssb_dev_wrapper, dev);
|
|
kfree(devwrap);
|
|
}
|
|
|
|
static int ssb_devices_register(struct ssb_bus *bus)
|
|
{
|
|
struct ssb_device *sdev;
|
|
struct device *dev;
|
|
struct __ssb_dev_wrapper *devwrap;
|
|
int i, err = 0;
|
|
int dev_idx = 0;
|
|
|
|
for (i = 0; i < bus->nr_devices; i++) {
|
|
sdev = &(bus->devices[i]);
|
|
|
|
/* We don't register SSB-system devices to the kernel,
|
|
* as the drivers for them are built into SSB. */
|
|
switch (sdev->id.coreid) {
|
|
case SSB_DEV_CHIPCOMMON:
|
|
case SSB_DEV_PCI:
|
|
case SSB_DEV_PCIE:
|
|
case SSB_DEV_PCMCIA:
|
|
case SSB_DEV_MIPS:
|
|
case SSB_DEV_MIPS_3302:
|
|
case SSB_DEV_EXTIF:
|
|
continue;
|
|
}
|
|
|
|
devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
|
|
if (!devwrap) {
|
|
ssb_printk(KERN_ERR PFX
|
|
"Could not allocate device\n");
|
|
err = -ENOMEM;
|
|
goto error;
|
|
}
|
|
dev = &devwrap->dev;
|
|
devwrap->sdev = sdev;
|
|
|
|
dev->release = ssb_release_dev;
|
|
dev->bus = &ssb_bustype;
|
|
dev_set_name(dev, "ssb%u:%d", bus->busnumber, dev_idx);
|
|
|
|
switch (bus->bustype) {
|
|
case SSB_BUSTYPE_PCI:
|
|
#ifdef CONFIG_SSB_PCIHOST
|
|
sdev->irq = bus->host_pci->irq;
|
|
dev->parent = &bus->host_pci->dev;
|
|
sdev->dma_dev = dev->parent;
|
|
#endif
|
|
break;
|
|
case SSB_BUSTYPE_PCMCIA:
|
|
#ifdef CONFIG_SSB_PCMCIAHOST
|
|
sdev->irq = bus->host_pcmcia->irq;
|
|
dev->parent = &bus->host_pcmcia->dev;
|
|
#endif
|
|
break;
|
|
case SSB_BUSTYPE_SDIO:
|
|
#ifdef CONFIG_SSB_SDIOHOST
|
|
dev->parent = &bus->host_sdio->dev;
|
|
#endif
|
|
break;
|
|
case SSB_BUSTYPE_SSB:
|
|
dev->dma_mask = &dev->coherent_dma_mask;
|
|
sdev->dma_dev = dev;
|
|
break;
|
|
}
|
|
|
|
sdev->dev = dev;
|
|
err = device_register(dev);
|
|
if (err) {
|
|
ssb_printk(KERN_ERR PFX
|
|
"Could not register %s\n",
|
|
dev_name(dev));
|
|
/* Set dev to NULL to not unregister
|
|
* dev on error unwinding. */
|
|
sdev->dev = NULL;
|
|
kfree(devwrap);
|
|
goto error;
|
|
}
|
|
dev_idx++;
|
|
}
|
|
|
|
return 0;
|
|
error:
|
|
/* Unwind the already registered devices. */
|
|
ssb_devices_unregister(bus);
|
|
return err;
|
|
}
|
|
|
|
/* Needs ssb_buses_lock() */
|
|
static int __devinit ssb_attach_queued_buses(void)
|
|
{
|
|
struct ssb_bus *bus, *n;
|
|
int err = 0;
|
|
int drop_them_all = 0;
|
|
|
|
list_for_each_entry_safe(bus, n, &attach_queue, list) {
|
|
if (drop_them_all) {
|
|
list_del(&bus->list);
|
|
continue;
|
|
}
|
|
/* Can't init the PCIcore in ssb_bus_register(), as that
|
|
* is too early in boot for embedded systems
|
|
* (no udelay() available). So do it here in attach stage.
|
|
*/
|
|
err = ssb_bus_powerup(bus, 0);
|
|
if (err)
|
|
goto error;
|
|
ssb_pcicore_init(&bus->pcicore);
|
|
ssb_bus_may_powerdown(bus);
|
|
|
|
err = ssb_devices_register(bus);
|
|
error:
|
|
if (err) {
|
|
drop_them_all = 1;
|
|
list_del(&bus->list);
|
|
continue;
|
|
}
|
|
list_move_tail(&bus->list, &buses);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static u8 ssb_ssb_read8(struct ssb_device *dev, u16 offset)
|
|
{
|
|
struct ssb_bus *bus = dev->bus;
|
|
|
|
offset += dev->core_index * SSB_CORE_SIZE;
|
|
return readb(bus->mmio + offset);
|
|
}
|
|
|
|
static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset)
|
|
{
|
|
struct ssb_bus *bus = dev->bus;
|
|
|
|
offset += dev->core_index * SSB_CORE_SIZE;
|
|
return readw(bus->mmio + offset);
|
|
}
|
|
|
|
static u32 ssb_ssb_read32(struct ssb_device *dev, u16 offset)
|
|
{
|
|
struct ssb_bus *bus = dev->bus;
|
|
|
|
offset += dev->core_index * SSB_CORE_SIZE;
|
|
return readl(bus->mmio + offset);
|
|
}
|
|
|
|
#ifdef CONFIG_SSB_BLOCKIO
|
|
static void ssb_ssb_block_read(struct ssb_device *dev, void *buffer,
|
|
size_t count, u16 offset, u8 reg_width)
|
|
{
|
|
struct ssb_bus *bus = dev->bus;
|
|
void __iomem *addr;
|
|
|
|
offset += dev->core_index * SSB_CORE_SIZE;
|
|
addr = bus->mmio + offset;
|
|
|
|
switch (reg_width) {
|
|
case sizeof(u8): {
|
|
u8 *buf = buffer;
|
|
|
|
while (count) {
|
|
*buf = __raw_readb(addr);
|
|
buf++;
|
|
count--;
|
|
}
|
|
break;
|
|
}
|
|
case sizeof(u16): {
|
|
__le16 *buf = buffer;
|
|
|
|
SSB_WARN_ON(count & 1);
|
|
while (count) {
|
|
*buf = (__force __le16)__raw_readw(addr);
|
|
buf++;
|
|
count -= 2;
|
|
}
|
|
break;
|
|
}
|
|
case sizeof(u32): {
|
|
__le32 *buf = buffer;
|
|
|
|
SSB_WARN_ON(count & 3);
|
|
while (count) {
|
|
*buf = (__force __le32)__raw_readl(addr);
|
|
buf++;
|
|
count -= 4;
|
|
}
|
|
break;
|
|
}
|
|
default:
|
|
SSB_WARN_ON(1);
|
|
}
|
|
}
|
|
#endif /* CONFIG_SSB_BLOCKIO */
|
|
|
|
static void ssb_ssb_write8(struct ssb_device *dev, u16 offset, u8 value)
|
|
{
|
|
struct ssb_bus *bus = dev->bus;
|
|
|
|
offset += dev->core_index * SSB_CORE_SIZE;
|
|
writeb(value, bus->mmio + offset);
|
|
}
|
|
|
|
static void ssb_ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
|
|
{
|
|
struct ssb_bus *bus = dev->bus;
|
|
|
|
offset += dev->core_index * SSB_CORE_SIZE;
|
|
writew(value, bus->mmio + offset);
|
|
}
|
|
|
|
static void ssb_ssb_write32(struct ssb_device *dev, u16 offset, u32 value)
|
|
{
|
|
struct ssb_bus *bus = dev->bus;
|
|
|
|
offset += dev->core_index * SSB_CORE_SIZE;
|
|
writel(value, bus->mmio + offset);
|
|
}
|
|
|
|
#ifdef CONFIG_SSB_BLOCKIO
|
|
static void ssb_ssb_block_write(struct ssb_device *dev, const void *buffer,
|
|
size_t count, u16 offset, u8 reg_width)
|
|
{
|
|
struct ssb_bus *bus = dev->bus;
|
|
void __iomem *addr;
|
|
|
|
offset += dev->core_index * SSB_CORE_SIZE;
|
|
addr = bus->mmio + offset;
|
|
|
|
switch (reg_width) {
|
|
case sizeof(u8): {
|
|
const u8 *buf = buffer;
|
|
|
|
while (count) {
|
|
__raw_writeb(*buf, addr);
|
|
buf++;
|
|
count--;
|
|
}
|
|
break;
|
|
}
|
|
case sizeof(u16): {
|
|
const __le16 *buf = buffer;
|
|
|
|
SSB_WARN_ON(count & 1);
|
|
while (count) {
|
|
__raw_writew((__force u16)(*buf), addr);
|
|
buf++;
|
|
count -= 2;
|
|
}
|
|
break;
|
|
}
|
|
case sizeof(u32): {
|
|
const __le32 *buf = buffer;
|
|
|
|
SSB_WARN_ON(count & 3);
|
|
while (count) {
|
|
__raw_writel((__force u32)(*buf), addr);
|
|
buf++;
|
|
count -= 4;
|
|
}
|
|
break;
|
|
}
|
|
default:
|
|
SSB_WARN_ON(1);
|
|
}
|
|
}
|
|
#endif /* CONFIG_SSB_BLOCKIO */
|
|
|
|
/* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */
|
|
static const struct ssb_bus_ops ssb_ssb_ops = {
|
|
.read8 = ssb_ssb_read8,
|
|
.read16 = ssb_ssb_read16,
|
|
.read32 = ssb_ssb_read32,
|
|
.write8 = ssb_ssb_write8,
|
|
.write16 = ssb_ssb_write16,
|
|
.write32 = ssb_ssb_write32,
|
|
#ifdef CONFIG_SSB_BLOCKIO
|
|
.block_read = ssb_ssb_block_read,
|
|
.block_write = ssb_ssb_block_write,
|
|
#endif
|
|
};
|
|
|
|
static int ssb_fetch_invariants(struct ssb_bus *bus,
|
|
ssb_invariants_func_t get_invariants)
|
|
{
|
|
struct ssb_init_invariants iv;
|
|
int err;
|
|
|
|
memset(&iv, 0, sizeof(iv));
|
|
err = get_invariants(bus, &iv);
|
|
if (err)
|
|
goto out;
|
|
memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo));
|
|
memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom));
|
|
bus->has_cardbus_slot = iv.has_cardbus_slot;
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int __devinit ssb_bus_register(struct ssb_bus *bus,
|
|
ssb_invariants_func_t get_invariants,
|
|
unsigned long baseaddr)
|
|
{
|
|
int err;
|
|
|
|
spin_lock_init(&bus->bar_lock);
|
|
INIT_LIST_HEAD(&bus->list);
|
|
#ifdef CONFIG_SSB_EMBEDDED
|
|
spin_lock_init(&bus->gpio_lock);
|
|
#endif
|
|
|
|
/* Powerup the bus */
|
|
err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
|
|
if (err)
|
|
goto out;
|
|
|
|
/* Init SDIO-host device (if any), before the scan */
|
|
err = ssb_sdio_init(bus);
|
|
if (err)
|
|
goto err_disable_xtal;
|
|
|
|
ssb_buses_lock();
|
|
bus->busnumber = next_busnumber;
|
|
/* Scan for devices (cores) */
|
|
err = ssb_bus_scan(bus, baseaddr);
|
|
if (err)
|
|
goto err_sdio_exit;
|
|
|
|
/* Init PCI-host device (if any) */
|
|
err = ssb_pci_init(bus);
|
|
if (err)
|
|
goto err_unmap;
|
|
/* Init PCMCIA-host device (if any) */
|
|
err = ssb_pcmcia_init(bus);
|
|
if (err)
|
|
goto err_pci_exit;
|
|
|
|
/* Initialize basic system devices (if available) */
|
|
err = ssb_bus_powerup(bus, 0);
|
|
if (err)
|
|
goto err_pcmcia_exit;
|
|
ssb_chipcommon_init(&bus->chipco);
|
|
ssb_mipscore_init(&bus->mipscore);
|
|
err = ssb_fetch_invariants(bus, get_invariants);
|
|
if (err) {
|
|
ssb_bus_may_powerdown(bus);
|
|
goto err_pcmcia_exit;
|
|
}
|
|
ssb_bus_may_powerdown(bus);
|
|
|
|
/* Queue it for attach.
|
|
* See the comment at the ssb_is_early_boot definition. */
|
|
list_add_tail(&bus->list, &attach_queue);
|
|
if (!ssb_is_early_boot) {
|
|
/* This is not early boot, so we must attach the bus now */
|
|
err = ssb_attach_queued_buses();
|
|
if (err)
|
|
goto err_dequeue;
|
|
}
|
|
next_busnumber++;
|
|
ssb_buses_unlock();
|
|
|
|
out:
|
|
return err;
|
|
|
|
err_dequeue:
|
|
list_del(&bus->list);
|
|
err_pcmcia_exit:
|
|
ssb_pcmcia_exit(bus);
|
|
err_pci_exit:
|
|
ssb_pci_exit(bus);
|
|
err_unmap:
|
|
ssb_iounmap(bus);
|
|
err_sdio_exit:
|
|
ssb_sdio_exit(bus);
|
|
err_disable_xtal:
|
|
ssb_buses_unlock();
|
|
ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
|
|
return err;
|
|
}
|
|
|
|
#ifdef CONFIG_SSB_PCIHOST
|
|
int __devinit ssb_bus_pcibus_register(struct ssb_bus *bus,
|
|
struct pci_dev *host_pci)
|
|
{
|
|
int err;
|
|
|
|
bus->bustype = SSB_BUSTYPE_PCI;
|
|
bus->host_pci = host_pci;
|
|
bus->ops = &ssb_pci_ops;
|
|
|
|
err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
|
|
if (!err) {
|
|
ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
|
|
"PCI device %s\n", dev_name(&host_pci->dev));
|
|
} else {
|
|
ssb_printk(KERN_ERR PFX "Failed to register PCI version"
|
|
" of SSB with error %d\n", err);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(ssb_bus_pcibus_register);
|
|
#endif /* CONFIG_SSB_PCIHOST */
|
|
|
|
#ifdef CONFIG_SSB_PCMCIAHOST
|
|
int __devinit ssb_bus_pcmciabus_register(struct ssb_bus *bus,
|
|
struct pcmcia_device *pcmcia_dev,
|
|
unsigned long baseaddr)
|
|
{
|
|
int err;
|
|
|
|
bus->bustype = SSB_BUSTYPE_PCMCIA;
|
|
bus->host_pcmcia = pcmcia_dev;
|
|
bus->ops = &ssb_pcmcia_ops;
|
|
|
|
err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
|
|
if (!err) {
|
|
ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
|
|
"PCMCIA device %s\n", pcmcia_dev->devname);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
|
|
#endif /* CONFIG_SSB_PCMCIAHOST */
|
|
|
|
#ifdef CONFIG_SSB_SDIOHOST
|
|
int __devinit ssb_bus_sdiobus_register(struct ssb_bus *bus,
|
|
struct sdio_func *func,
|
|
unsigned int quirks)
|
|
{
|
|
int err;
|
|
|
|
bus->bustype = SSB_BUSTYPE_SDIO;
|
|
bus->host_sdio = func;
|
|
bus->ops = &ssb_sdio_ops;
|
|
bus->quirks = quirks;
|
|
|
|
err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
|
|
if (!err) {
|
|
ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
|
|
"SDIO device %s\n", sdio_func_id(func));
|
|
}
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(ssb_bus_sdiobus_register);
|
|
#endif /* CONFIG_SSB_PCMCIAHOST */
|
|
|
|
int __devinit ssb_bus_ssbbus_register(struct ssb_bus *bus,
|
|
unsigned long baseaddr,
|
|
ssb_invariants_func_t get_invariants)
|
|
{
|
|
int err;
|
|
|
|
bus->bustype = SSB_BUSTYPE_SSB;
|
|
bus->ops = &ssb_ssb_ops;
|
|
|
|
err = ssb_bus_register(bus, get_invariants, baseaddr);
|
|
if (!err) {
|
|
ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
|
|
"address 0x%08lX\n", baseaddr);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
int __ssb_driver_register(struct ssb_driver *drv, struct module *owner)
|
|
{
|
|
drv->drv.name = drv->name;
|
|
drv->drv.bus = &ssb_bustype;
|
|
drv->drv.owner = owner;
|
|
|
|
return driver_register(&drv->drv);
|
|
}
|
|
EXPORT_SYMBOL(__ssb_driver_register);
|
|
|
|
void ssb_driver_unregister(struct ssb_driver *drv)
|
|
{
|
|
driver_unregister(&drv->drv);
|
|
}
|
|
EXPORT_SYMBOL(ssb_driver_unregister);
|
|
|
|
void ssb_set_devtypedata(struct ssb_device *dev, void *data)
|
|
{
|
|
struct ssb_bus *bus = dev->bus;
|
|
struct ssb_device *ent;
|
|
int i;
|
|
|
|
for (i = 0; i < bus->nr_devices; i++) {
|
|
ent = &(bus->devices[i]);
|
|
if (ent->id.vendor != dev->id.vendor)
|
|
continue;
|
|
if (ent->id.coreid != dev->id.coreid)
|
|
continue;
|
|
|
|
ent->devtypedata = data;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(ssb_set_devtypedata);
|
|
|
|
static u32 clkfactor_f6_resolve(u32 v)
|
|
{
|
|
/* map the magic values */
|
|
switch (v) {
|
|
case SSB_CHIPCO_CLK_F6_2:
|
|
return 2;
|
|
case SSB_CHIPCO_CLK_F6_3:
|
|
return 3;
|
|
case SSB_CHIPCO_CLK_F6_4:
|
|
return 4;
|
|
case SSB_CHIPCO_CLK_F6_5:
|
|
return 5;
|
|
case SSB_CHIPCO_CLK_F6_6:
|
|
return 6;
|
|
case SSB_CHIPCO_CLK_F6_7:
|
|
return 7;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Calculate the speed the backplane would run at a given set of clockcontrol values */
|
|
u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m)
|
|
{
|
|
u32 n1, n2, clock, m1, m2, m3, mc;
|
|
|
|
n1 = (n & SSB_CHIPCO_CLK_N1);
|
|
n2 = ((n & SSB_CHIPCO_CLK_N2) >> SSB_CHIPCO_CLK_N2_SHIFT);
|
|
|
|
switch (plltype) {
|
|
case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
|
|
if (m & SSB_CHIPCO_CLK_T6_MMASK)
|
|
return SSB_CHIPCO_CLK_T6_M1;
|
|
return SSB_CHIPCO_CLK_T6_M0;
|
|
case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
|
|
case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
|
|
case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
|
|
case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
|
|
n1 = clkfactor_f6_resolve(n1);
|
|
n2 += SSB_CHIPCO_CLK_F5_BIAS;
|
|
break;
|
|
case SSB_PLLTYPE_2: /* 48Mhz, 4 dividers */
|
|
n1 += SSB_CHIPCO_CLK_T2_BIAS;
|
|
n2 += SSB_CHIPCO_CLK_T2_BIAS;
|
|
SSB_WARN_ON(!((n1 >= 2) && (n1 <= 7)));
|
|
SSB_WARN_ON(!((n2 >= 5) && (n2 <= 23)));
|
|
break;
|
|
case SSB_PLLTYPE_5: /* 25Mhz, 4 dividers */
|
|
return 100000000;
|
|
default:
|
|
SSB_WARN_ON(1);
|
|
}
|
|
|
|
switch (plltype) {
|
|
case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
|
|
case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
|
|
clock = SSB_CHIPCO_CLK_BASE2 * n1 * n2;
|
|
break;
|
|
default:
|
|
clock = SSB_CHIPCO_CLK_BASE1 * n1 * n2;
|
|
}
|
|
if (!clock)
|
|
return 0;
|
|
|
|
m1 = (m & SSB_CHIPCO_CLK_M1);
|
|
m2 = ((m & SSB_CHIPCO_CLK_M2) >> SSB_CHIPCO_CLK_M2_SHIFT);
|
|
m3 = ((m & SSB_CHIPCO_CLK_M3) >> SSB_CHIPCO_CLK_M3_SHIFT);
|
|
mc = ((m & SSB_CHIPCO_CLK_MC) >> SSB_CHIPCO_CLK_MC_SHIFT);
|
|
|
|
switch (plltype) {
|
|
case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
|
|
case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
|
|
case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
|
|
case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
|
|
m1 = clkfactor_f6_resolve(m1);
|
|
if ((plltype == SSB_PLLTYPE_1) ||
|
|
(plltype == SSB_PLLTYPE_3))
|
|
m2 += SSB_CHIPCO_CLK_F5_BIAS;
|
|
else
|
|
m2 = clkfactor_f6_resolve(m2);
|
|
m3 = clkfactor_f6_resolve(m3);
|
|
|
|
switch (mc) {
|
|
case SSB_CHIPCO_CLK_MC_BYPASS:
|
|
return clock;
|
|
case SSB_CHIPCO_CLK_MC_M1:
|
|
return (clock / m1);
|
|
case SSB_CHIPCO_CLK_MC_M1M2:
|
|
return (clock / (m1 * m2));
|
|
case SSB_CHIPCO_CLK_MC_M1M2M3:
|
|
return (clock / (m1 * m2 * m3));
|
|
case SSB_CHIPCO_CLK_MC_M1M3:
|
|
return (clock / (m1 * m3));
|
|
}
|
|
return 0;
|
|
case SSB_PLLTYPE_2:
|
|
m1 += SSB_CHIPCO_CLK_T2_BIAS;
|
|
m2 += SSB_CHIPCO_CLK_T2M2_BIAS;
|
|
m3 += SSB_CHIPCO_CLK_T2_BIAS;
|
|
SSB_WARN_ON(!((m1 >= 2) && (m1 <= 7)));
|
|
SSB_WARN_ON(!((m2 >= 3) && (m2 <= 10)));
|
|
SSB_WARN_ON(!((m3 >= 2) && (m3 <= 7)));
|
|
|
|
if (!(mc & SSB_CHIPCO_CLK_T2MC_M1BYP))
|
|
clock /= m1;
|
|
if (!(mc & SSB_CHIPCO_CLK_T2MC_M2BYP))
|
|
clock /= m2;
|
|
if (!(mc & SSB_CHIPCO_CLK_T2MC_M3BYP))
|
|
clock /= m3;
|
|
return clock;
|
|
default:
|
|
SSB_WARN_ON(1);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Get the current speed the backplane is running at */
|
|
u32 ssb_clockspeed(struct ssb_bus *bus)
|
|
{
|
|
u32 rate;
|
|
u32 plltype;
|
|
u32 clkctl_n, clkctl_m;
|
|
|
|
if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
|
|
return ssb_pmu_get_controlclock(&bus->chipco);
|
|
|
|
if (ssb_extif_available(&bus->extif))
|
|
ssb_extif_get_clockcontrol(&bus->extif, &plltype,
|
|
&clkctl_n, &clkctl_m);
|
|
else if (bus->chipco.dev)
|
|
ssb_chipco_get_clockcontrol(&bus->chipco, &plltype,
|
|
&clkctl_n, &clkctl_m);
|
|
else
|
|
return 0;
|
|
|
|
if (bus->chip_id == 0x5365) {
|
|
rate = 100000000;
|
|
} else {
|
|
rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
|
|
if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */
|
|
rate /= 2;
|
|
}
|
|
|
|
return rate;
|
|
}
|
|
EXPORT_SYMBOL(ssb_clockspeed);
|
|
|
|
static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev)
|
|
{
|
|
u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV;
|
|
|
|
/* The REJECT bit seems to be different for Backplane rev 2.3 */
|
|
switch (rev) {
|
|
case SSB_IDLOW_SSBREV_22:
|
|
case SSB_IDLOW_SSBREV_24:
|
|
case SSB_IDLOW_SSBREV_26:
|
|
return SSB_TMSLOW_REJECT;
|
|
case SSB_IDLOW_SSBREV_23:
|
|
return SSB_TMSLOW_REJECT_23;
|
|
case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */
|
|
case SSB_IDLOW_SSBREV_27: /* same here */
|
|
return SSB_TMSLOW_REJECT; /* this is a guess */
|
|
default:
|
|
printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
|
|
WARN_ON(1);
|
|
}
|
|
return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23);
|
|
}
|
|
|
|
int ssb_device_is_enabled(struct ssb_device *dev)
|
|
{
|
|
u32 val;
|
|
u32 reject;
|
|
|
|
reject = ssb_tmslow_reject_bitmask(dev);
|
|
val = ssb_read32(dev, SSB_TMSLOW);
|
|
val &= SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET | reject;
|
|
|
|
return (val == SSB_TMSLOW_CLOCK);
|
|
}
|
|
EXPORT_SYMBOL(ssb_device_is_enabled);
|
|
|
|
static void ssb_flush_tmslow(struct ssb_device *dev)
|
|
{
|
|
/* Make _really_ sure the device has finished the TMSLOW
|
|
* register write transaction, as we risk running into
|
|
* a machine check exception otherwise.
|
|
* Do this by reading the register back to commit the
|
|
* PCI write and delay an additional usec for the device
|
|
* to react to the change. */
|
|
ssb_read32(dev, SSB_TMSLOW);
|
|
udelay(1);
|
|
}
|
|
|
|
void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags)
|
|
{
|
|
u32 val;
|
|
|
|
ssb_device_disable(dev, core_specific_flags);
|
|
ssb_write32(dev, SSB_TMSLOW,
|
|
SSB_TMSLOW_RESET | SSB_TMSLOW_CLOCK |
|
|
SSB_TMSLOW_FGC | core_specific_flags);
|
|
ssb_flush_tmslow(dev);
|
|
|
|
/* Clear SERR if set. This is a hw bug workaround. */
|
|
if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_SERR)
|
|
ssb_write32(dev, SSB_TMSHIGH, 0);
|
|
|
|
val = ssb_read32(dev, SSB_IMSTATE);
|
|
if (val & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) {
|
|
val &= ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO);
|
|
ssb_write32(dev, SSB_IMSTATE, val);
|
|
}
|
|
|
|
ssb_write32(dev, SSB_TMSLOW,
|
|
SSB_TMSLOW_CLOCK | SSB_TMSLOW_FGC |
|
|
core_specific_flags);
|
|
ssb_flush_tmslow(dev);
|
|
|
|
ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_CLOCK |
|
|
core_specific_flags);
|
|
ssb_flush_tmslow(dev);
|
|
}
|
|
EXPORT_SYMBOL(ssb_device_enable);
|
|
|
|
/* Wait for bitmask in a register to get set or cleared.
|
|
* timeout is in units of ten-microseconds */
|
|
static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask,
|
|
int timeout, int set)
|
|
{
|
|
int i;
|
|
u32 val;
|
|
|
|
for (i = 0; i < timeout; i++) {
|
|
val = ssb_read32(dev, reg);
|
|
if (set) {
|
|
if ((val & bitmask) == bitmask)
|
|
return 0;
|
|
} else {
|
|
if (!(val & bitmask))
|
|
return 0;
|
|
}
|
|
udelay(10);
|
|
}
|
|
printk(KERN_ERR PFX "Timeout waiting for bitmask %08X on "
|
|
"register %04X to %s.\n",
|
|
bitmask, reg, (set ? "set" : "clear"));
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
|
|
{
|
|
u32 reject, val;
|
|
|
|
if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
|
|
return;
|
|
|
|
reject = ssb_tmslow_reject_bitmask(dev);
|
|
|
|
if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_CLOCK) {
|
|
ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
|
|
ssb_wait_bits(dev, SSB_TMSLOW, reject, 1000, 1);
|
|
ssb_wait_bits(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
|
|
|
|
if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
|
|
val = ssb_read32(dev, SSB_IMSTATE);
|
|
val |= SSB_IMSTATE_REJECT;
|
|
ssb_write32(dev, SSB_IMSTATE, val);
|
|
ssb_wait_bits(dev, SSB_IMSTATE, SSB_IMSTATE_BUSY, 1000,
|
|
0);
|
|
}
|
|
|
|
ssb_write32(dev, SSB_TMSLOW,
|
|
SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
|
|
reject | SSB_TMSLOW_RESET |
|
|
core_specific_flags);
|
|
ssb_flush_tmslow(dev);
|
|
|
|
if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
|
|
val = ssb_read32(dev, SSB_IMSTATE);
|
|
val &= ~SSB_IMSTATE_REJECT;
|
|
ssb_write32(dev, SSB_IMSTATE, val);
|
|
}
|
|
}
|
|
|
|
ssb_write32(dev, SSB_TMSLOW,
|
|
reject | SSB_TMSLOW_RESET |
|
|
core_specific_flags);
|
|
ssb_flush_tmslow(dev);
|
|
}
|
|
EXPORT_SYMBOL(ssb_device_disable);
|
|
|
|
/* Some chipsets need routing known for PCIe and 64-bit DMA */
|
|
static bool ssb_dma_translation_special_bit(struct ssb_device *dev)
|
|
{
|
|
u16 chip_id = dev->bus->chip_id;
|
|
|
|
if (dev->id.coreid == SSB_DEV_80211) {
|
|
return (chip_id == 0x4322 || chip_id == 43221 ||
|
|
chip_id == 43231 || chip_id == 43222);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
u32 ssb_dma_translation(struct ssb_device *dev)
|
|
{
|
|
switch (dev->bus->bustype) {
|
|
case SSB_BUSTYPE_SSB:
|
|
return 0;
|
|
case SSB_BUSTYPE_PCI:
|
|
if (pci_is_pcie(dev->bus->host_pci) &&
|
|
ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) {
|
|
return SSB_PCIE_DMA_H32;
|
|
} else {
|
|
if (ssb_dma_translation_special_bit(dev))
|
|
return SSB_PCIE_DMA_H32;
|
|
else
|
|
return SSB_PCI_DMA;
|
|
}
|
|
default:
|
|
__ssb_dma_not_implemented(dev);
|
|
}
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(ssb_dma_translation);
|
|
|
|
int ssb_bus_may_powerdown(struct ssb_bus *bus)
|
|
{
|
|
struct ssb_chipcommon *cc;
|
|
int err = 0;
|
|
|
|
/* On buses where more than one core may be working
|
|
* at a time, we must not powerdown stuff if there are
|
|
* still cores that may want to run. */
|
|
if (bus->bustype == SSB_BUSTYPE_SSB)
|
|
goto out;
|
|
|
|
cc = &bus->chipco;
|
|
|
|
if (!cc->dev)
|
|
goto out;
|
|
if (cc->dev->id.revision < 5)
|
|
goto out;
|
|
|
|
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
|
|
err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
|
|
if (err)
|
|
goto error;
|
|
out:
|
|
#ifdef CONFIG_SSB_DEBUG
|
|
bus->powered_up = 0;
|
|
#endif
|
|
return err;
|
|
error:
|
|
ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
|
|
goto out;
|
|
}
|
|
EXPORT_SYMBOL(ssb_bus_may_powerdown);
|
|
|
|
int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
|
|
{
|
|
int err;
|
|
enum ssb_clkmode mode;
|
|
|
|
err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
|
|
if (err)
|
|
goto error;
|
|
|
|
#ifdef CONFIG_SSB_DEBUG
|
|
bus->powered_up = 1;
|
|
#endif
|
|
|
|
mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
|
|
ssb_chipco_set_clockmode(&bus->chipco, mode);
|
|
|
|
return 0;
|
|
error:
|
|
ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(ssb_bus_powerup);
|
|
|
|
static void ssb_broadcast_value(struct ssb_device *dev,
|
|
u32 address, u32 data)
|
|
{
|
|
#ifdef CONFIG_SSB_DRIVER_PCICORE
|
|
/* This is used for both, PCI and ChipCommon core, so be careful. */
|
|
BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
|
|
BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
|
|
#endif
|
|
|
|
ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address);
|
|
ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */
|
|
ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data);
|
|
ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */
|
|
}
|
|
|
|
void ssb_commit_settings(struct ssb_bus *bus)
|
|
{
|
|
struct ssb_device *dev;
|
|
|
|
#ifdef CONFIG_SSB_DRIVER_PCICORE
|
|
dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
|
|
#else
|
|
dev = bus->chipco.dev;
|
|
#endif
|
|
if (WARN_ON(!dev))
|
|
return;
|
|
/* This forces an update of the cached registers. */
|
|
ssb_broadcast_value(dev, 0xFD8, 0);
|
|
}
|
|
EXPORT_SYMBOL(ssb_commit_settings);
|
|
|
|
u32 ssb_admatch_base(u32 adm)
|
|
{
|
|
u32 base = 0;
|
|
|
|
switch (adm & SSB_ADM_TYPE) {
|
|
case SSB_ADM_TYPE0:
|
|
base = (adm & SSB_ADM_BASE0);
|
|
break;
|
|
case SSB_ADM_TYPE1:
|
|
SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
|
|
base = (adm & SSB_ADM_BASE1);
|
|
break;
|
|
case SSB_ADM_TYPE2:
|
|
SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
|
|
base = (adm & SSB_ADM_BASE2);
|
|
break;
|
|
default:
|
|
SSB_WARN_ON(1);
|
|
}
|
|
|
|
return base;
|
|
}
|
|
EXPORT_SYMBOL(ssb_admatch_base);
|
|
|
|
u32 ssb_admatch_size(u32 adm)
|
|
{
|
|
u32 size = 0;
|
|
|
|
switch (adm & SSB_ADM_TYPE) {
|
|
case SSB_ADM_TYPE0:
|
|
size = ((adm & SSB_ADM_SZ0) >> SSB_ADM_SZ0_SHIFT);
|
|
break;
|
|
case SSB_ADM_TYPE1:
|
|
SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
|
|
size = ((adm & SSB_ADM_SZ1) >> SSB_ADM_SZ1_SHIFT);
|
|
break;
|
|
case SSB_ADM_TYPE2:
|
|
SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
|
|
size = ((adm & SSB_ADM_SZ2) >> SSB_ADM_SZ2_SHIFT);
|
|
break;
|
|
default:
|
|
SSB_WARN_ON(1);
|
|
}
|
|
size = (1 << (size + 1));
|
|
|
|
return size;
|
|
}
|
|
EXPORT_SYMBOL(ssb_admatch_size);
|
|
|
|
static int __init ssb_modinit(void)
|
|
{
|
|
int err;
|
|
|
|
/* See the comment at the ssb_is_early_boot definition */
|
|
ssb_is_early_boot = 0;
|
|
err = bus_register(&ssb_bustype);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Maybe we already registered some buses at early boot.
|
|
* Check for this and attach them
|
|
*/
|
|
ssb_buses_lock();
|
|
err = ssb_attach_queued_buses();
|
|
ssb_buses_unlock();
|
|
if (err) {
|
|
bus_unregister(&ssb_bustype);
|
|
goto out;
|
|
}
|
|
|
|
err = b43_pci_ssb_bridge_init();
|
|
if (err) {
|
|
ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
|
|
"initialization failed\n");
|
|
/* don't fail SSB init because of this */
|
|
err = 0;
|
|
}
|
|
err = ssb_gige_init();
|
|
if (err) {
|
|
ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
|
|
"driver initialization failed\n");
|
|
/* don't fail SSB init because of this */
|
|
err = 0;
|
|
}
|
|
out:
|
|
return err;
|
|
}
|
|
/* ssb must be initialized after PCI but before the ssb drivers.
|
|
* That means we must use some initcall between subsys_initcall
|
|
* and device_initcall. */
|
|
fs_initcall(ssb_modinit);
|
|
|
|
static void __exit ssb_modexit(void)
|
|
{
|
|
ssb_gige_exit();
|
|
b43_pci_ssb_bridge_exit();
|
|
bus_unregister(&ssb_bustype);
|
|
}
|
|
module_exit(ssb_modexit)
|