linux/drivers/iio/proximity/as3935.c
Greg Kroah-Hartman 3c9a6793bd Second round of new iio device support, features and cleanups in the 4.8 cycle
Firstly some contact detail updates:
 * NXP took over freescale. Update the mma8452 header to reflect this.
 * Martin Kepplinger email address change in mma8452 header.
 * Adriana Reus has changed email address. Update .mailmap.
 * Matt Ranostay has changed email address. Update .mailmap.
 
 New Device Support
 * max1363
   - add the missing i2c_device_ids for a couple of parts so they can actually
     be used.
 * ms5867
   - add device ids for ms5805 and ms5837 parts.
 
 New Features
 * ad5755
   - DT support.  This one was a bit controversial and under review for a long
     time.  Still no one could come up with a better solution.
 * stx104
   - add gpio support
 * ti-adc081c
   - Add ACPI device ID matching.
 
 Core changes
 * Refuse to register triggers with duplicate names.  There is no way to
   distinguish between them so this makes no sense.  A few drivers do not
   generate unique names for each instance of the device present.  We can't
   fix this without changing ABI so leave them and wait for someone to
   actually take the rare step of two identical accelerometers on the same
   board.
 * buffer-dma
   - use ARRAY_SIZE in a few appropriate locations.
 
 Tools
 * Fix the fact that the --trigger-num option in generic_buffer didn't allow
   0 which is perfectly valid in the ABI.
 
 Cleanups
 * as3935
   - improve error reporting.
   - remove redundant zeroing of a field in iio_priv.
 * gp2ap020a00f
   - use the iio_device_claim_*_mode helpers rather than open coding locking
   around mode changes.
 * isl29125
   - use the iio_device_claim_*_mode helpers rather than open coding locking.
 * lidar
   - use the iio_device_claim_*_mode helpers rather than open coding locking.
 * mma8452
   - more detail in devices supported description in comments (addresses and
   similar)
 * sca3000
   - add a missing error check.
 * tcs3414
   - use the iio_device_claim_*_mode helpers rather than open coding locking.
 * tcs3472
   - use the iio_device_claim_*_mode helpers rather than open coding locking.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXdAT2AAoJEFSFNJnE9BaIq68P/3Z0q1lc1cb+K8HV5jgukEKw
 eoxZa5lFIOuHAGeXo9GAdJiH5oT/yAIhadf3gzuuQLaTJwWYKD51aPVwgpT5M2+x
 Bnu2XiYcaoIm/Foat70ycjeYaGxO/xO2vbLp5v0BJV2ujvjm/oCKw5pxYeU4Jm63
 iKaZo9jn/HoshOMpZBrcPZ7Q1TogRdopBNe2fsc8nXFFsv8ODjOZ9Nebs2lk36e+
 PWLUWfSkv2LMBSE2LOFyjSW8E4ItBBngBcyqBTFiiln7mpXU5Vv2QSvUhpP2YjUZ
 rxKvDiG7ADuxMr901whASxyCO180yCxTRIcBsN8oP73gTGHrJnMT0Sptfz7AUUVN
 gJneiy+iy3TecJ/R6w/DnNzqmZMiEVqlYGkdXVGu8SXrKWilvzcTp5iTmDVM5zLb
 1fDZxjbLdNJuHzoSYNiCBcnfzIixOAyKTGFi3jUaPPQ/Lc1qfmgerWWlOzKeUgCZ
 5Bzak8MvWuxcO7jkMG8mbARufy3Nu6eh8a39JXFhViGtTtySydMa8eXdYPjqoAtv
 vgwJNh9U53yYui8i7vU90dM3gJaGg5a4R6EjEKCYcEJf6kM9Go8xCvjU8YWPtIKk
 rfykpPkKcQzbax07YKvb4f015x7r0V6WCGJjPn0Fi14ugNGJJ6M88l+2UcXcx1zS
 RRtVRD49Le7pIDCs1Rqn
 =6Lja
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.8b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second round of new iio device support, features and cleanups in the 4.8 cycle

Firstly some contact detail updates:
* NXP took over freescale. Update the mma8452 header to reflect this.
* Martin Kepplinger email address change in mma8452 header.
* Adriana Reus has changed email address. Update .mailmap.
* Matt Ranostay has changed email address. Update .mailmap.

New Device Support
* max1363
  - add the missing i2c_device_ids for a couple of parts so they can actually
    be used.
* ms5867
  - add device ids for ms5805 and ms5837 parts.

New Features
* ad5755
  - DT support.  This one was a bit controversial and under review for a long
    time.  Still no one could come up with a better solution.
* stx104
  - add gpio support
* ti-adc081c
  - Add ACPI device ID matching.

Core changes
* Refuse to register triggers with duplicate names.  There is no way to
  distinguish between them so this makes no sense.  A few drivers do not
  generate unique names for each instance of the device present.  We can't
  fix this without changing ABI so leave them and wait for someone to
  actually take the rare step of two identical accelerometers on the same
  board.
* buffer-dma
  - use ARRAY_SIZE in a few appropriate locations.

Tools
* Fix the fact that the --trigger-num option in generic_buffer didn't allow
  0 which is perfectly valid in the ABI.

Cleanups
* as3935
  - improve error reporting.
  - remove redundant zeroing of a field in iio_priv.
* gp2ap020a00f
  - use the iio_device_claim_*_mode helpers rather than open coding locking
  around mode changes.
* isl29125
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
* lidar
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
* mma8452
  - more detail in devices supported description in comments (addresses and
  similar)
* sca3000
  - add a missing error check.
* tcs3414
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
* tcs3472
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
2016-06-29 15:35:01 -07:00

476 lines
10 KiB
C

/*
* as3935.c - Support for AS3935 Franklin lightning sensor
*
* Copyright (C) 2014 Matt Ranostay <mranostay@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/workqueue.h>
#include <linux/mutex.h>
#include <linux/err.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/trigger.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/buffer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/of_gpio.h>
#define AS3935_AFE_GAIN 0x00
#define AS3935_AFE_MASK 0x3F
#define AS3935_AFE_GAIN_MAX 0x1F
#define AS3935_AFE_PWR_BIT BIT(0)
#define AS3935_INT 0x03
#define AS3935_INT_MASK 0x07
#define AS3935_EVENT_INT BIT(3)
#define AS3935_NOISE_INT BIT(1)
#define AS3935_DATA 0x07
#define AS3935_DATA_MASK 0x3F
#define AS3935_TUNE_CAP 0x08
#define AS3935_CALIBRATE 0x3D
#define AS3935_WRITE_DATA BIT(15)
#define AS3935_READ_DATA BIT(14)
#define AS3935_ADDRESS(x) ((x) << 8)
#define MAX_PF_CAP 120
#define TUNE_CAP_DIV 8
struct as3935_state {
struct spi_device *spi;
struct iio_trigger *trig;
struct mutex lock;
struct delayed_work work;
u32 tune_cap;
u8 buffer[16]; /* 8-bit data + 56-bit padding + 64-bit timestamp */
u8 buf[2] ____cacheline_aligned;
};
static const struct iio_chan_spec as3935_channels[] = {
{
.type = IIO_PROXIMITY,
.info_mask_separate =
BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_PROCESSED) |
BIT(IIO_CHAN_INFO_SCALE),
.scan_index = 0,
.scan_type = {
.sign = 'u',
.realbits = 6,
.storagebits = 8,
},
},
IIO_CHAN_SOFT_TIMESTAMP(1),
};
static int as3935_read(struct as3935_state *st, unsigned int reg, int *val)
{
u8 cmd;
int ret;
cmd = (AS3935_READ_DATA | AS3935_ADDRESS(reg)) >> 8;
ret = spi_w8r8(st->spi, cmd);
if (ret < 0)
return ret;
*val = ret;
return 0;
}
static int as3935_write(struct as3935_state *st,
unsigned int reg,
unsigned int val)
{
u8 *buf = st->buf;
buf[0] = (AS3935_WRITE_DATA | AS3935_ADDRESS(reg)) >> 8;
buf[1] = val;
return spi_write(st->spi, buf, 2);
}
static ssize_t as3935_sensor_sensitivity_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct as3935_state *st = iio_priv(dev_to_iio_dev(dev));
int val, ret;
ret = as3935_read(st, AS3935_AFE_GAIN, &val);
if (ret)
return ret;
val = (val & AS3935_AFE_MASK) >> 1;
return sprintf(buf, "%d\n", val);
}
static ssize_t as3935_sensor_sensitivity_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t len)
{
struct as3935_state *st = iio_priv(dev_to_iio_dev(dev));
unsigned long val;
int ret;
ret = kstrtoul((const char *) buf, 10, &val);
if (ret)
return -EINVAL;
if (val > AS3935_AFE_GAIN_MAX)
return -EINVAL;
as3935_write(st, AS3935_AFE_GAIN, val << 1);
return len;
}
static IIO_DEVICE_ATTR(sensor_sensitivity, S_IRUGO | S_IWUSR,
as3935_sensor_sensitivity_show, as3935_sensor_sensitivity_store, 0);
static struct attribute *as3935_attributes[] = {
&iio_dev_attr_sensor_sensitivity.dev_attr.attr,
NULL,
};
static struct attribute_group as3935_attribute_group = {
.attrs = as3935_attributes,
};
static int as3935_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val,
int *val2,
long m)
{
struct as3935_state *st = iio_priv(indio_dev);
int ret;
switch (m) {
case IIO_CHAN_INFO_PROCESSED:
case IIO_CHAN_INFO_RAW:
*val2 = 0;
ret = as3935_read(st, AS3935_DATA, val);
if (ret)
return ret;
if (m == IIO_CHAN_INFO_RAW)
return IIO_VAL_INT;
/* storm out of range */
if (*val == AS3935_DATA_MASK)
return -EINVAL;
if (m == IIO_CHAN_INFO_PROCESSED)
*val *= 1000;
break;
case IIO_CHAN_INFO_SCALE:
*val = 1000;
break;
default:
return -EINVAL;
}
return IIO_VAL_INT;
}
static const struct iio_info as3935_info = {
.driver_module = THIS_MODULE,
.attrs = &as3935_attribute_group,
.read_raw = &as3935_read_raw,
};
static irqreturn_t as3935_trigger_handler(int irq, void *private)
{
struct iio_poll_func *pf = private;
struct iio_dev *indio_dev = pf->indio_dev;
struct as3935_state *st = iio_priv(indio_dev);
int val, ret;
ret = as3935_read(st, AS3935_DATA, &val);
if (ret)
goto err_read;
st->buffer[0] = val & AS3935_DATA_MASK;
iio_push_to_buffers_with_timestamp(indio_dev, &st->buffer,
pf->timestamp);
err_read:
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
}
static const struct iio_trigger_ops iio_interrupt_trigger_ops = {
.owner = THIS_MODULE,
};
static void as3935_event_work(struct work_struct *work)
{
struct as3935_state *st;
int val;
int ret;
st = container_of(work, struct as3935_state, work.work);
ret = as3935_read(st, AS3935_INT, &val);
if (ret) {
dev_warn(&st->spi->dev, "read error\n");
return;
}
val &= AS3935_INT_MASK;
switch (val) {
case AS3935_EVENT_INT:
iio_trigger_poll(st->trig);
break;
case AS3935_NOISE_INT:
dev_warn(&st->spi->dev, "noise level is too high\n");
break;
}
}
static irqreturn_t as3935_interrupt_handler(int irq, void *private)
{
struct iio_dev *indio_dev = private;
struct as3935_state *st = iio_priv(indio_dev);
/*
* Delay work for >2 milliseconds after an interrupt to allow
* estimated distance to recalculated.
*/
schedule_delayed_work(&st->work, msecs_to_jiffies(3));
return IRQ_HANDLED;
}
static void calibrate_as3935(struct as3935_state *st)
{
mutex_lock(&st->lock);
/* mask disturber interrupt bit */
as3935_write(st, AS3935_INT, BIT(5));
as3935_write(st, AS3935_CALIBRATE, 0x96);
as3935_write(st, AS3935_TUNE_CAP,
BIT(5) | (st->tune_cap / TUNE_CAP_DIV));
mdelay(2);
as3935_write(st, AS3935_TUNE_CAP, (st->tune_cap / TUNE_CAP_DIV));
mutex_unlock(&st->lock);
}
#ifdef CONFIG_PM_SLEEP
static int as3935_suspend(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct as3935_state *st = iio_priv(indio_dev);
int val, ret;
mutex_lock(&st->lock);
ret = as3935_read(st, AS3935_AFE_GAIN, &val);
if (ret)
goto err_suspend;
val |= AS3935_AFE_PWR_BIT;
ret = as3935_write(st, AS3935_AFE_GAIN, val);
err_suspend:
mutex_unlock(&st->lock);
return ret;
}
static int as3935_resume(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct as3935_state *st = iio_priv(indio_dev);
int val, ret;
mutex_lock(&st->lock);
ret = as3935_read(st, AS3935_AFE_GAIN, &val);
if (ret)
goto err_resume;
val &= ~AS3935_AFE_PWR_BIT;
ret = as3935_write(st, AS3935_AFE_GAIN, val);
err_resume:
mutex_unlock(&st->lock);
return ret;
}
static SIMPLE_DEV_PM_OPS(as3935_pm_ops, as3935_suspend, as3935_resume);
#define AS3935_PM_OPS (&as3935_pm_ops)
#else
#define AS3935_PM_OPS NULL
#endif
static int as3935_probe(struct spi_device *spi)
{
struct iio_dev *indio_dev;
struct iio_trigger *trig;
struct as3935_state *st;
struct device_node *np = spi->dev.of_node;
int ret;
/* Be sure lightning event interrupt is specified */
if (!spi->irq) {
dev_err(&spi->dev, "unable to get event interrupt\n");
return -EINVAL;
}
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
st = iio_priv(indio_dev);
st->spi = spi;
spi_set_drvdata(spi, indio_dev);
mutex_init(&st->lock);
INIT_DELAYED_WORK(&st->work, as3935_event_work);
ret = of_property_read_u32(np,
"ams,tuning-capacitor-pf", &st->tune_cap);
if (ret) {
st->tune_cap = 0;
dev_warn(&spi->dev,
"no tuning-capacitor-pf set, defaulting to %d",
st->tune_cap);
}
if (st->tune_cap > MAX_PF_CAP) {
dev_err(&spi->dev,
"wrong tuning-capacitor-pf setting of %d\n",
st->tune_cap);
return -EINVAL;
}
indio_dev->dev.parent = &spi->dev;
indio_dev->name = spi_get_device_id(spi)->name;
indio_dev->channels = as3935_channels;
indio_dev->num_channels = ARRAY_SIZE(as3935_channels);
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &as3935_info;
trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d",
indio_dev->name, indio_dev->id);
if (!trig)
return -ENOMEM;
st->trig = trig;
trig->dev.parent = indio_dev->dev.parent;
iio_trigger_set_drvdata(trig, indio_dev);
trig->ops = &iio_interrupt_trigger_ops;
ret = iio_trigger_register(trig);
if (ret) {
dev_err(&spi->dev, "failed to register trigger\n");
return ret;
}
ret = iio_triggered_buffer_setup(indio_dev, NULL,
&as3935_trigger_handler, NULL);
if (ret) {
dev_err(&spi->dev, "cannot setup iio trigger\n");
goto unregister_trigger;
}
calibrate_as3935(st);
ret = devm_request_irq(&spi->dev, spi->irq,
&as3935_interrupt_handler,
IRQF_TRIGGER_RISING,
dev_name(&spi->dev),
indio_dev);
if (ret) {
dev_err(&spi->dev, "unable to request irq\n");
goto unregister_buffer;
}
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(&spi->dev, "unable to register device\n");
goto unregister_buffer;
}
return 0;
unregister_buffer:
iio_triggered_buffer_cleanup(indio_dev);
unregister_trigger:
iio_trigger_unregister(st->trig);
return ret;
}
static int as3935_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
struct as3935_state *st = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
iio_triggered_buffer_cleanup(indio_dev);
iio_trigger_unregister(st->trig);
return 0;
}
static const struct of_device_id as3935_of_match[] = {
{ .compatible = "ams,as3935", },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, as3935_of_match);
static const struct spi_device_id as3935_id[] = {
{"as3935", 0},
{},
};
MODULE_DEVICE_TABLE(spi, as3935_id);
static struct spi_driver as3935_driver = {
.driver = {
.name = "as3935",
.of_match_table = of_match_ptr(as3935_of_match),
.pm = AS3935_PM_OPS,
},
.probe = as3935_probe,
.remove = as3935_remove,
.id_table = as3935_id,
};
module_spi_driver(as3935_driver);
MODULE_AUTHOR("Matt Ranostay <mranostay@gmail.com>");
MODULE_DESCRIPTION("AS3935 lightning sensor");
MODULE_LICENSE("GPL");