linux/Documentation/devicetree/bindings/sound/uniphier,aio.txt
Katsuhiro Suzuki 8413b9e00a
ASoC: uniphier: add support for UniPhier PXs2 AIO
This patch adds support for UniPhier AIO sound driver
which is included in UniPhier PXs2 SoCs.

Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-09 15:49:42 +00:00

38 lines
1.3 KiB
Plaintext

Socionext UniPhier SoC audio driver
The Socionext UniPhier audio subsystem consists of I2S and S/PDIF blocks in
the same register space.
Required properties:
- compatible : should be one of the following:
"socionext,uniphier-ld11-aio"
"socionext,uniphier-ld20-aio"
"socionext,uniphier-pxs2-aio"
- reg : offset and length of the register set for the device.
- interrupts : should contain I2S or S/PDIF interrupt.
- pinctrl-names : should be "default".
- pinctrl-0 : defined I2S signal pins for an external codec chip.
- clock-names : should include following entries:
"aio"
- clocks : a list of phandle, should contain an entry for each
entry in clock-names.
- reset-names : should include following entries:
"aio"
- resets : a list of phandle, should contain an entry for each
entry in reset-names.
- #sound-dai-cells: should be 1.
Example:
audio {
compatible = "socionext,uniphier-ld20-aio";
reg = <0x56000000 0x80000>;
interrupts = <0 144 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_aout>;
clock-names = "aio";
clocks = <&sys_clk 40>;
reset-names = "aio";
resets = <&sys_rst 40>;
#sound-dai-cells = <1>;
};