mirror of
https://github.com/torvalds/linux.git
synced 2024-11-23 20:51:44 +00:00
8148c17b17
Core changes: - The gpiolib MMIO driver has been enhanced to handle two direction registers, i.e. one register to set lines as input and one register to set lines as output. It turns out some silicon engineer thinks the ability to configure a line as input and output at the same time makes sense, this can be debated but includes a lot of analog electronics reasoning, and the registers are there and need to be handled consistently. Unsurprisingly, we enforce the lines to be either inputs or outputs in such schemes. - Send in the proper argument value to .set_config() dispatched to the pin control subsystem. Nobody used it before, now someone does, so fix it to work as expected. - The ACPI gpiolib portions can now handle pin bias setting (pull up or pull down). This has been in the ACPI spec for years and we finally have it properly integrated with Linux GPIOs. It was based on an observation from Andy Schevchenko that Thomas Petazzoni's changes to the core for biasing the PCA950x GPIO expander actually happen to fit hand-in-glove with what the ACPI core needed. Such nice synergies happen sometimes. New drivers: - A new driver for the Mellanox BlueField GPIO controller. This is using 64bit MMIO registers and can configure lines as inputs and outputs at the same time and after improving the MMIO library we handle it just fine. Interesting. - A new IXP4xx proper gpiochip driver with hierarchical interrupts should be coming in from the ARM SoC tree as well. Driver enhancements: - The PCA053x driver handles the CAT9554 GPIO expander. - The PCA053x driver handles the NXP PCAL6416 GPIO expander. - Wake-up support on PCA053x GPIO lines. - OMAP now does a nice asynchronous IRQ handling on wake-ups by letting everything wake up on edges, and this makes runtime PM work as expected too. Misc: - Several cleanups such as devres fixes. - Get rid of some languager comstructs that cause problems when compiling with LLVMs clang. - Documentation review and update. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJc1olZAAoJEEEQszewGV1zEU4P/RmTf3hG8xmNPS3MDTmR6gAy /YJOXjXBf3CD/dmEAyyaNLnUQismrtRNvHSoEGbno7gkU+htzp9UfUJkj6+HIXs2 RpF+Hi78HzZNDxGWuBLu6OZolpmBtx+sRKOhHk/XfNS45qd1FgXWDuulzsYa9Xsr hYMXdtdv9wY/vcc68q1rtKAbzlu5ZNCa3Zj1iNOr/XQt3Nl2BW66hGLgjK4mOvgx fJy4rFXuDIMfDvo69U1Opz2b39sfE7XMhfZS/MOgg4yEV9zGRgDoI1tyMcTqGb8Q 8LQbp5dXkP+3dJQB8tgbu3Vk4WC1Rd/pmIli5sMgsk0HYQ6XegfT6HJKozSmwN9r 0s8jKlrocWZvdPo1aJwQgtRS56t2rFWcrcRye8bLqxkkW5cYIq9CwkE8USwB31Kv PFpoOwRuCtj0gkCxf7WIEcC5NAkYPow3K1KPdk3E0Si6I3pj0NqqlaAD0JAlkC2V aPq3xbTuFCAdmcADEt2Z+dUJ7WIs5Y9oQgosMAx+A2AD4K3QDBMu3pZsT6SCu4XZ mK0eWJi9/CvOj/s7bA0BEJVxQA+p8KYsNRBOULg/8aAOqGcLnSydQjqrxDTE8YrL xmmRG7i7ht0B9CchZuIB5hqdvjbCgvcVa5OnCUDfLxE0GdCx8iJ9y9OrsMXbabYq 8FcPDo1N38cTYLnLqvKI =rhto -----END PGP SIGNATURE----- Merge tag 'gpio-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull gpio updates from Linus Walleij: "This is the bulk of the GPIO changes for the v5.2 kernel cycle. A bit later than usual because I was ironing out my own mistakes. I'm holding some stuff back for the next kernel as a result, and this should be a healthy and well tested batch. Core changes: - The gpiolib MMIO driver has been enhanced to handle two direction registers, i.e. one register to set lines as input and one register to set lines as output. It turns out some silicon engineer thinks the ability to configure a line as input and output at the same time makes sense, this can be debated but includes a lot of analog electronics reasoning, and the registers are there and need to be handled consistently. Unsurprisingly, we enforce the lines to be either inputs or outputs in such schemes. - Send in the proper argument value to .set_config() dispatched to the pin control subsystem. Nobody used it before, now someone does, so fix it to work as expected. - The ACPI gpiolib portions can now handle pin bias setting (pull up or pull down). This has been in the ACPI spec for years and we finally have it properly integrated with Linux GPIOs. It was based on an observation from Andy Schevchenko that Thomas Petazzoni's changes to the core for biasing the PCA950x GPIO expander actually happen to fit hand-in-glove with what the ACPI core needed. Such nice synergies happen sometimes. New drivers: - A new driver for the Mellanox BlueField GPIO controller. This is using 64bit MMIO registers and can configure lines as inputs and outputs at the same time and after improving the MMIO library we handle it just fine. Interesting. - A new IXP4xx proper gpiochip driver with hierarchical interrupts should be coming in from the ARM SoC tree as well. Driver enhancements: - The PCA053x driver handles the CAT9554 GPIO expander. - The PCA053x driver handles the NXP PCAL6416 GPIO expander. - Wake-up support on PCA053x GPIO lines. - OMAP now does a nice asynchronous IRQ handling on wake-ups by letting everything wake up on edges, and this makes runtime PM work as expected too. Misc: - Several cleanups such as devres fixes. - Get rid of some languager comstructs that cause problems when compiling with LLVMs clang. - Documentation review and update" * tag 'gpio-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (85 commits) gpio: Update documentation docs: gpio: convert docs to ReST and rename to *.rst gpio: sch: Remove write-only core_base gpio: pxa: Make two symbols static gpiolib: acpi: Respect pin bias setting gpiolib: acpi: Add acpi_gpio_update_gpiod_lookup_flags() helper gpiolib: acpi: Set pin value, based on bias, more accurately gpiolib: acpi: Change type of dflags gpiolib: Introduce GPIO_LOOKUP_FLAGS_DEFAULT gpiolib: Make use of enum gpio_lookup_flags consistent gpiolib: Indent entry values of enum gpio_lookup_flags gpio: pca953x: add support for pca6416 dt-bindings: gpio: pca953x: document the nxp,pca6416 gpio: pca953x: add pcal6416 to the of_device_id table gpio: gpio-omap: Remove conditional pm_runtime handling for GPIO interrupts gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup tracing: stop making gpio tracing configurable gpio: pca953x: Configure wake-up path when wake-up is enabled gpio: of: Optimize quirk checks gpio: mmio: Drop bgpio_dir_inverted ...
4815 lines
130 KiB
C
4815 lines
130 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
#include <linux/bitmap.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/list.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/idr.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/gpio/machine.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/cdev.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/compat.h>
|
|
#include <linux/anon_inodes.h>
|
|
#include <linux/file.h>
|
|
#include <linux/kfifo.h>
|
|
#include <linux/poll.h>
|
|
#include <linux/timekeeping.h>
|
|
#include <uapi/linux/gpio.h>
|
|
|
|
#include "gpiolib.h"
|
|
|
|
#define CREATE_TRACE_POINTS
|
|
#include <trace/events/gpio.h>
|
|
|
|
/* Implementation infrastructure for GPIO interfaces.
|
|
*
|
|
* The GPIO programming interface allows for inlining speed-critical
|
|
* get/set operations for common cases, so that access to SOC-integrated
|
|
* GPIOs can sometimes cost only an instruction or two per bit.
|
|
*/
|
|
|
|
|
|
/* When debugging, extend minimal trust to callers and platform code.
|
|
* Also emit diagnostic messages that may help initial bringup, when
|
|
* board setup or driver bugs are most common.
|
|
*
|
|
* Otherwise, minimize overhead in what may be bitbanging codepaths.
|
|
*/
|
|
#ifdef DEBUG
|
|
#define extra_checks 1
|
|
#else
|
|
#define extra_checks 0
|
|
#endif
|
|
|
|
/* Device and char device-related information */
|
|
static DEFINE_IDA(gpio_ida);
|
|
static dev_t gpio_devt;
|
|
#define GPIO_DEV_MAX 256 /* 256 GPIO chip devices supported */
|
|
static struct bus_type gpio_bus_type = {
|
|
.name = "gpio",
|
|
};
|
|
|
|
/*
|
|
* Number of GPIOs to use for the fast path in set array
|
|
*/
|
|
#define FASTPATH_NGPIO CONFIG_GPIOLIB_FASTPATH_LIMIT
|
|
|
|
/* gpio_lock prevents conflicts during gpio_desc[] table updates.
|
|
* While any GPIO is requested, its gpio_chip is not removable;
|
|
* each GPIO's "requested" flag serves as a lock and refcount.
|
|
*/
|
|
DEFINE_SPINLOCK(gpio_lock);
|
|
|
|
static DEFINE_MUTEX(gpio_lookup_lock);
|
|
static LIST_HEAD(gpio_lookup_list);
|
|
LIST_HEAD(gpio_devices);
|
|
|
|
static DEFINE_MUTEX(gpio_machine_hogs_mutex);
|
|
static LIST_HEAD(gpio_machine_hogs);
|
|
|
|
static void gpiochip_free_hogs(struct gpio_chip *chip);
|
|
static int gpiochip_add_irqchip(struct gpio_chip *gpiochip,
|
|
struct lock_class_key *lock_key,
|
|
struct lock_class_key *request_key);
|
|
static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip);
|
|
static int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gpiochip);
|
|
static void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gpiochip);
|
|
|
|
static bool gpiolib_initialized;
|
|
|
|
static inline void desc_set_label(struct gpio_desc *d, const char *label)
|
|
{
|
|
d->label = label;
|
|
}
|
|
|
|
/**
|
|
* gpio_to_desc - Convert a GPIO number to its descriptor
|
|
* @gpio: global GPIO number
|
|
*
|
|
* Returns:
|
|
* The GPIO descriptor associated with the given GPIO, or %NULL if no GPIO
|
|
* with the given number exists in the system.
|
|
*/
|
|
struct gpio_desc *gpio_to_desc(unsigned gpio)
|
|
{
|
|
struct gpio_device *gdev;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&gpio_lock, flags);
|
|
|
|
list_for_each_entry(gdev, &gpio_devices, list) {
|
|
if (gdev->base <= gpio &&
|
|
gdev->base + gdev->ngpio > gpio) {
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
return &gdev->descs[gpio - gdev->base];
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
|
|
if (!gpio_is_valid(gpio))
|
|
WARN(1, "invalid GPIO %d\n", gpio);
|
|
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpio_to_desc);
|
|
|
|
/**
|
|
* gpiochip_get_desc - get the GPIO descriptor corresponding to the given
|
|
* hardware number for this chip
|
|
* @chip: GPIO chip
|
|
* @hwnum: hardware number of the GPIO for this chip
|
|
*
|
|
* Returns:
|
|
* A pointer to the GPIO descriptor or %ERR_PTR(-EINVAL) if no GPIO exists
|
|
* in the given chip for the specified hardware number.
|
|
*/
|
|
struct gpio_desc *gpiochip_get_desc(struct gpio_chip *chip,
|
|
u16 hwnum)
|
|
{
|
|
struct gpio_device *gdev = chip->gpiodev;
|
|
|
|
if (hwnum >= gdev->ngpio)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
return &gdev->descs[hwnum];
|
|
}
|
|
|
|
/**
|
|
* desc_to_gpio - convert a GPIO descriptor to the integer namespace
|
|
* @desc: GPIO descriptor
|
|
*
|
|
* This should disappear in the future but is needed since we still
|
|
* use GPIO numbers for error messages and sysfs nodes.
|
|
*
|
|
* Returns:
|
|
* The global GPIO number for the GPIO specified by its descriptor.
|
|
*/
|
|
int desc_to_gpio(const struct gpio_desc *desc)
|
|
{
|
|
return desc->gdev->base + (desc - &desc->gdev->descs[0]);
|
|
}
|
|
EXPORT_SYMBOL_GPL(desc_to_gpio);
|
|
|
|
|
|
/**
|
|
* gpiod_to_chip - Return the GPIO chip to which a GPIO descriptor belongs
|
|
* @desc: descriptor to return the chip of
|
|
*/
|
|
struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc)
|
|
{
|
|
if (!desc || !desc->gdev)
|
|
return NULL;
|
|
return desc->gdev->chip;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_to_chip);
|
|
|
|
/* dynamic allocation of GPIOs, e.g. on a hotplugged device */
|
|
static int gpiochip_find_base(int ngpio)
|
|
{
|
|
struct gpio_device *gdev;
|
|
int base = ARCH_NR_GPIOS - ngpio;
|
|
|
|
list_for_each_entry_reverse(gdev, &gpio_devices, list) {
|
|
/* found a free space? */
|
|
if (gdev->base + gdev->ngpio <= base)
|
|
break;
|
|
else
|
|
/* nope, check the space right before the chip */
|
|
base = gdev->base - ngpio;
|
|
}
|
|
|
|
if (gpio_is_valid(base)) {
|
|
pr_debug("%s: found new base at %d\n", __func__, base);
|
|
return base;
|
|
} else {
|
|
pr_err("%s: cannot find free range\n", __func__);
|
|
return -ENOSPC;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* gpiod_get_direction - return the current direction of a GPIO
|
|
* @desc: GPIO to get the direction of
|
|
*
|
|
* Returns 0 for output, 1 for input, or an error code in case of error.
|
|
*
|
|
* This function may sleep if gpiod_cansleep() is true.
|
|
*/
|
|
int gpiod_get_direction(struct gpio_desc *desc)
|
|
{
|
|
struct gpio_chip *chip;
|
|
unsigned offset;
|
|
int status;
|
|
|
|
chip = gpiod_to_chip(desc);
|
|
offset = gpio_chip_hwgpio(desc);
|
|
|
|
if (!chip->get_direction)
|
|
return -ENOTSUPP;
|
|
|
|
status = chip->get_direction(chip, offset);
|
|
if (status > 0) {
|
|
/* GPIOF_DIR_IN, or other positive */
|
|
status = 1;
|
|
clear_bit(FLAG_IS_OUT, &desc->flags);
|
|
}
|
|
if (status == 0) {
|
|
/* GPIOF_DIR_OUT */
|
|
set_bit(FLAG_IS_OUT, &desc->flags);
|
|
}
|
|
return status;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_get_direction);
|
|
|
|
/*
|
|
* Add a new chip to the global chips list, keeping the list of chips sorted
|
|
* by range(means [base, base + ngpio - 1]) order.
|
|
*
|
|
* Return -EBUSY if the new chip overlaps with some other chip's integer
|
|
* space.
|
|
*/
|
|
static int gpiodev_add_to_list(struct gpio_device *gdev)
|
|
{
|
|
struct gpio_device *prev, *next;
|
|
|
|
if (list_empty(&gpio_devices)) {
|
|
/* initial entry in list */
|
|
list_add_tail(&gdev->list, &gpio_devices);
|
|
return 0;
|
|
}
|
|
|
|
next = list_entry(gpio_devices.next, struct gpio_device, list);
|
|
if (gdev->base + gdev->ngpio <= next->base) {
|
|
/* add before first entry */
|
|
list_add(&gdev->list, &gpio_devices);
|
|
return 0;
|
|
}
|
|
|
|
prev = list_entry(gpio_devices.prev, struct gpio_device, list);
|
|
if (prev->base + prev->ngpio <= gdev->base) {
|
|
/* add behind last entry */
|
|
list_add_tail(&gdev->list, &gpio_devices);
|
|
return 0;
|
|
}
|
|
|
|
list_for_each_entry_safe(prev, next, &gpio_devices, list) {
|
|
/* at the end of the list */
|
|
if (&next->list == &gpio_devices)
|
|
break;
|
|
|
|
/* add between prev and next */
|
|
if (prev->base + prev->ngpio <= gdev->base
|
|
&& gdev->base + gdev->ngpio <= next->base) {
|
|
list_add(&gdev->list, &prev->list);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
dev_err(&gdev->dev, "GPIO integer space overlap, cannot add chip\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
/*
|
|
* Convert a GPIO name to its descriptor
|
|
*/
|
|
static struct gpio_desc *gpio_name_to_desc(const char * const name)
|
|
{
|
|
struct gpio_device *gdev;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&gpio_lock, flags);
|
|
|
|
list_for_each_entry(gdev, &gpio_devices, list) {
|
|
int i;
|
|
|
|
for (i = 0; i != gdev->ngpio; ++i) {
|
|
struct gpio_desc *desc = &gdev->descs[i];
|
|
|
|
if (!desc->name || !name)
|
|
continue;
|
|
|
|
if (!strcmp(desc->name, name)) {
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
return desc;
|
|
}
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* Takes the names from gc->names and checks if they are all unique. If they
|
|
* are, they are assigned to their gpio descriptors.
|
|
*
|
|
* Warning if one of the names is already used for a different GPIO.
|
|
*/
|
|
static int gpiochip_set_desc_names(struct gpio_chip *gc)
|
|
{
|
|
struct gpio_device *gdev = gc->gpiodev;
|
|
int i;
|
|
|
|
if (!gc->names)
|
|
return 0;
|
|
|
|
/* First check all names if they are unique */
|
|
for (i = 0; i != gc->ngpio; ++i) {
|
|
struct gpio_desc *gpio;
|
|
|
|
gpio = gpio_name_to_desc(gc->names[i]);
|
|
if (gpio)
|
|
dev_warn(&gdev->dev,
|
|
"Detected name collision for GPIO name '%s'\n",
|
|
gc->names[i]);
|
|
}
|
|
|
|
/* Then add all names to the GPIO descriptors */
|
|
for (i = 0; i != gc->ngpio; ++i)
|
|
gdev->descs[i].name = gc->names[i];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned long *gpiochip_allocate_mask(struct gpio_chip *chip)
|
|
{
|
|
unsigned long *p;
|
|
|
|
p = kmalloc_array(BITS_TO_LONGS(chip->ngpio), sizeof(*p), GFP_KERNEL);
|
|
if (!p)
|
|
return NULL;
|
|
|
|
/* Assume by default all GPIOs are valid */
|
|
bitmap_fill(p, chip->ngpio);
|
|
|
|
return p;
|
|
}
|
|
|
|
static int gpiochip_alloc_valid_mask(struct gpio_chip *gpiochip)
|
|
{
|
|
#ifdef CONFIG_OF_GPIO
|
|
int size;
|
|
struct device_node *np = gpiochip->of_node;
|
|
|
|
size = of_property_count_u32_elems(np, "gpio-reserved-ranges");
|
|
if (size > 0 && size % 2 == 0)
|
|
gpiochip->need_valid_mask = true;
|
|
#endif
|
|
|
|
if (!gpiochip->need_valid_mask)
|
|
return 0;
|
|
|
|
gpiochip->valid_mask = gpiochip_allocate_mask(gpiochip);
|
|
if (!gpiochip->valid_mask)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gpiochip_init_valid_mask(struct gpio_chip *gpiochip)
|
|
{
|
|
if (gpiochip->init_valid_mask)
|
|
return gpiochip->init_valid_mask(gpiochip);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gpiochip_free_valid_mask(struct gpio_chip *gpiochip)
|
|
{
|
|
kfree(gpiochip->valid_mask);
|
|
gpiochip->valid_mask = NULL;
|
|
}
|
|
|
|
bool gpiochip_line_is_valid(const struct gpio_chip *gpiochip,
|
|
unsigned int offset)
|
|
{
|
|
/* No mask means all valid */
|
|
if (likely(!gpiochip->valid_mask))
|
|
return true;
|
|
return test_bit(offset, gpiochip->valid_mask);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_line_is_valid);
|
|
|
|
/*
|
|
* GPIO line handle management
|
|
*/
|
|
|
|
/**
|
|
* struct linehandle_state - contains the state of a userspace handle
|
|
* @gdev: the GPIO device the handle pertains to
|
|
* @label: consumer label used to tag descriptors
|
|
* @descs: the GPIO descriptors held by this handle
|
|
* @numdescs: the number of descriptors held in the descs array
|
|
*/
|
|
struct linehandle_state {
|
|
struct gpio_device *gdev;
|
|
const char *label;
|
|
struct gpio_desc *descs[GPIOHANDLES_MAX];
|
|
u32 numdescs;
|
|
};
|
|
|
|
#define GPIOHANDLE_REQUEST_VALID_FLAGS \
|
|
(GPIOHANDLE_REQUEST_INPUT | \
|
|
GPIOHANDLE_REQUEST_OUTPUT | \
|
|
GPIOHANDLE_REQUEST_ACTIVE_LOW | \
|
|
GPIOHANDLE_REQUEST_OPEN_DRAIN | \
|
|
GPIOHANDLE_REQUEST_OPEN_SOURCE)
|
|
|
|
static long linehandle_ioctl(struct file *filep, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
struct linehandle_state *lh = filep->private_data;
|
|
void __user *ip = (void __user *)arg;
|
|
struct gpiohandle_data ghd;
|
|
DECLARE_BITMAP(vals, GPIOHANDLES_MAX);
|
|
int i;
|
|
|
|
if (cmd == GPIOHANDLE_GET_LINE_VALUES_IOCTL) {
|
|
/* NOTE: It's ok to read values of output lines. */
|
|
int ret = gpiod_get_array_value_complex(false,
|
|
true,
|
|
lh->numdescs,
|
|
lh->descs,
|
|
NULL,
|
|
vals);
|
|
if (ret)
|
|
return ret;
|
|
|
|
memset(&ghd, 0, sizeof(ghd));
|
|
for (i = 0; i < lh->numdescs; i++)
|
|
ghd.values[i] = test_bit(i, vals);
|
|
|
|
if (copy_to_user(ip, &ghd, sizeof(ghd)))
|
|
return -EFAULT;
|
|
|
|
return 0;
|
|
} else if (cmd == GPIOHANDLE_SET_LINE_VALUES_IOCTL) {
|
|
/*
|
|
* All line descriptors were created at once with the same
|
|
* flags so just check if the first one is really output.
|
|
*/
|
|
if (!test_bit(FLAG_IS_OUT, &lh->descs[0]->flags))
|
|
return -EPERM;
|
|
|
|
if (copy_from_user(&ghd, ip, sizeof(ghd)))
|
|
return -EFAULT;
|
|
|
|
/* Clamp all values to [0,1] */
|
|
for (i = 0; i < lh->numdescs; i++)
|
|
__assign_bit(i, vals, ghd.values[i]);
|
|
|
|
/* Reuse the array setting function */
|
|
return gpiod_set_array_value_complex(false,
|
|
true,
|
|
lh->numdescs,
|
|
lh->descs,
|
|
NULL,
|
|
vals);
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
#ifdef CONFIG_COMPAT
|
|
static long linehandle_ioctl_compat(struct file *filep, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
return linehandle_ioctl(filep, cmd, (unsigned long)compat_ptr(arg));
|
|
}
|
|
#endif
|
|
|
|
static int linehandle_release(struct inode *inode, struct file *filep)
|
|
{
|
|
struct linehandle_state *lh = filep->private_data;
|
|
struct gpio_device *gdev = lh->gdev;
|
|
int i;
|
|
|
|
for (i = 0; i < lh->numdescs; i++)
|
|
gpiod_free(lh->descs[i]);
|
|
kfree(lh->label);
|
|
kfree(lh);
|
|
put_device(&gdev->dev);
|
|
return 0;
|
|
}
|
|
|
|
static const struct file_operations linehandle_fileops = {
|
|
.release = linehandle_release,
|
|
.owner = THIS_MODULE,
|
|
.llseek = noop_llseek,
|
|
.unlocked_ioctl = linehandle_ioctl,
|
|
#ifdef CONFIG_COMPAT
|
|
.compat_ioctl = linehandle_ioctl_compat,
|
|
#endif
|
|
};
|
|
|
|
static int linehandle_create(struct gpio_device *gdev, void __user *ip)
|
|
{
|
|
struct gpiohandle_request handlereq;
|
|
struct linehandle_state *lh;
|
|
struct file *file;
|
|
int fd, i, count = 0, ret;
|
|
u32 lflags;
|
|
|
|
if (copy_from_user(&handlereq, ip, sizeof(handlereq)))
|
|
return -EFAULT;
|
|
if ((handlereq.lines == 0) || (handlereq.lines > GPIOHANDLES_MAX))
|
|
return -EINVAL;
|
|
|
|
lflags = handlereq.flags;
|
|
|
|
/* Return an error if an unknown flag is set */
|
|
if (lflags & ~GPIOHANDLE_REQUEST_VALID_FLAGS)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Do not allow OPEN_SOURCE & OPEN_DRAIN flags in a single request. If
|
|
* the hardware actually supports enabling both at the same time the
|
|
* electrical result would be disastrous.
|
|
*/
|
|
if ((lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN) &&
|
|
(lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE))
|
|
return -EINVAL;
|
|
|
|
/* OPEN_DRAIN and OPEN_SOURCE flags only make sense for output mode. */
|
|
if (!(lflags & GPIOHANDLE_REQUEST_OUTPUT) &&
|
|
((lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN) ||
|
|
(lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE)))
|
|
return -EINVAL;
|
|
|
|
lh = kzalloc(sizeof(*lh), GFP_KERNEL);
|
|
if (!lh)
|
|
return -ENOMEM;
|
|
lh->gdev = gdev;
|
|
get_device(&gdev->dev);
|
|
|
|
/* Make sure this is terminated */
|
|
handlereq.consumer_label[sizeof(handlereq.consumer_label)-1] = '\0';
|
|
if (strlen(handlereq.consumer_label)) {
|
|
lh->label = kstrdup(handlereq.consumer_label,
|
|
GFP_KERNEL);
|
|
if (!lh->label) {
|
|
ret = -ENOMEM;
|
|
goto out_free_lh;
|
|
}
|
|
}
|
|
|
|
/* Request each GPIO */
|
|
for (i = 0; i < handlereq.lines; i++) {
|
|
u32 offset = handlereq.lineoffsets[i];
|
|
struct gpio_desc *desc;
|
|
|
|
if (offset >= gdev->ngpio) {
|
|
ret = -EINVAL;
|
|
goto out_free_descs;
|
|
}
|
|
|
|
desc = &gdev->descs[offset];
|
|
ret = gpiod_request(desc, lh->label);
|
|
if (ret)
|
|
goto out_free_descs;
|
|
lh->descs[i] = desc;
|
|
count = i + 1;
|
|
|
|
if (lflags & GPIOHANDLE_REQUEST_ACTIVE_LOW)
|
|
set_bit(FLAG_ACTIVE_LOW, &desc->flags);
|
|
if (lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN)
|
|
set_bit(FLAG_OPEN_DRAIN, &desc->flags);
|
|
if (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE)
|
|
set_bit(FLAG_OPEN_SOURCE, &desc->flags);
|
|
|
|
ret = gpiod_set_transitory(desc, false);
|
|
if (ret < 0)
|
|
goto out_free_descs;
|
|
|
|
/*
|
|
* Lines have to be requested explicitly for input
|
|
* or output, else the line will be treated "as is".
|
|
*/
|
|
if (lflags & GPIOHANDLE_REQUEST_OUTPUT) {
|
|
int val = !!handlereq.default_values[i];
|
|
|
|
ret = gpiod_direction_output(desc, val);
|
|
if (ret)
|
|
goto out_free_descs;
|
|
} else if (lflags & GPIOHANDLE_REQUEST_INPUT) {
|
|
ret = gpiod_direction_input(desc);
|
|
if (ret)
|
|
goto out_free_descs;
|
|
}
|
|
dev_dbg(&gdev->dev, "registered chardev handle for line %d\n",
|
|
offset);
|
|
}
|
|
/* Let i point at the last handle */
|
|
i--;
|
|
lh->numdescs = handlereq.lines;
|
|
|
|
fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC);
|
|
if (fd < 0) {
|
|
ret = fd;
|
|
goto out_free_descs;
|
|
}
|
|
|
|
file = anon_inode_getfile("gpio-linehandle",
|
|
&linehandle_fileops,
|
|
lh,
|
|
O_RDONLY | O_CLOEXEC);
|
|
if (IS_ERR(file)) {
|
|
ret = PTR_ERR(file);
|
|
goto out_put_unused_fd;
|
|
}
|
|
|
|
handlereq.fd = fd;
|
|
if (copy_to_user(ip, &handlereq, sizeof(handlereq))) {
|
|
/*
|
|
* fput() will trigger the release() callback, so do not go onto
|
|
* the regular error cleanup path here.
|
|
*/
|
|
fput(file);
|
|
put_unused_fd(fd);
|
|
return -EFAULT;
|
|
}
|
|
|
|
fd_install(fd, file);
|
|
|
|
dev_dbg(&gdev->dev, "registered chardev handle for %d lines\n",
|
|
lh->numdescs);
|
|
|
|
return 0;
|
|
|
|
out_put_unused_fd:
|
|
put_unused_fd(fd);
|
|
out_free_descs:
|
|
for (i = 0; i < count; i++)
|
|
gpiod_free(lh->descs[i]);
|
|
kfree(lh->label);
|
|
out_free_lh:
|
|
kfree(lh);
|
|
put_device(&gdev->dev);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* GPIO line event management
|
|
*/
|
|
|
|
/**
|
|
* struct lineevent_state - contains the state of a userspace event
|
|
* @gdev: the GPIO device the event pertains to
|
|
* @label: consumer label used to tag descriptors
|
|
* @desc: the GPIO descriptor held by this event
|
|
* @eflags: the event flags this line was requested with
|
|
* @irq: the interrupt that trigger in response to events on this GPIO
|
|
* @wait: wait queue that handles blocking reads of events
|
|
* @events: KFIFO for the GPIO events
|
|
* @read_lock: mutex lock to protect reads from colliding with adding
|
|
* new events to the FIFO
|
|
* @timestamp: cache for the timestamp storing it between hardirq
|
|
* and IRQ thread, used to bring the timestamp close to the actual
|
|
* event
|
|
*/
|
|
struct lineevent_state {
|
|
struct gpio_device *gdev;
|
|
const char *label;
|
|
struct gpio_desc *desc;
|
|
u32 eflags;
|
|
int irq;
|
|
wait_queue_head_t wait;
|
|
DECLARE_KFIFO(events, struct gpioevent_data, 16);
|
|
struct mutex read_lock;
|
|
u64 timestamp;
|
|
};
|
|
|
|
#define GPIOEVENT_REQUEST_VALID_FLAGS \
|
|
(GPIOEVENT_REQUEST_RISING_EDGE | \
|
|
GPIOEVENT_REQUEST_FALLING_EDGE)
|
|
|
|
static __poll_t lineevent_poll(struct file *filep,
|
|
struct poll_table_struct *wait)
|
|
{
|
|
struct lineevent_state *le = filep->private_data;
|
|
__poll_t events = 0;
|
|
|
|
poll_wait(filep, &le->wait, wait);
|
|
|
|
if (!kfifo_is_empty(&le->events))
|
|
events = EPOLLIN | EPOLLRDNORM;
|
|
|
|
return events;
|
|
}
|
|
|
|
|
|
static ssize_t lineevent_read(struct file *filep,
|
|
char __user *buf,
|
|
size_t count,
|
|
loff_t *f_ps)
|
|
{
|
|
struct lineevent_state *le = filep->private_data;
|
|
unsigned int copied;
|
|
int ret;
|
|
|
|
if (count < sizeof(struct gpioevent_data))
|
|
return -EINVAL;
|
|
|
|
do {
|
|
if (kfifo_is_empty(&le->events)) {
|
|
if (filep->f_flags & O_NONBLOCK)
|
|
return -EAGAIN;
|
|
|
|
ret = wait_event_interruptible(le->wait,
|
|
!kfifo_is_empty(&le->events));
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (mutex_lock_interruptible(&le->read_lock))
|
|
return -ERESTARTSYS;
|
|
ret = kfifo_to_user(&le->events, buf, count, &copied);
|
|
mutex_unlock(&le->read_lock);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* If we couldn't read anything from the fifo (a different
|
|
* thread might have been faster) we either return -EAGAIN if
|
|
* the file descriptor is non-blocking, otherwise we go back to
|
|
* sleep and wait for more data to arrive.
|
|
*/
|
|
if (copied == 0 && (filep->f_flags & O_NONBLOCK))
|
|
return -EAGAIN;
|
|
|
|
} while (copied == 0);
|
|
|
|
return copied;
|
|
}
|
|
|
|
static int lineevent_release(struct inode *inode, struct file *filep)
|
|
{
|
|
struct lineevent_state *le = filep->private_data;
|
|
struct gpio_device *gdev = le->gdev;
|
|
|
|
free_irq(le->irq, le);
|
|
gpiod_free(le->desc);
|
|
kfree(le->label);
|
|
kfree(le);
|
|
put_device(&gdev->dev);
|
|
return 0;
|
|
}
|
|
|
|
static long lineevent_ioctl(struct file *filep, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
struct lineevent_state *le = filep->private_data;
|
|
void __user *ip = (void __user *)arg;
|
|
struct gpiohandle_data ghd;
|
|
|
|
/*
|
|
* We can get the value for an event line but not set it,
|
|
* because it is input by definition.
|
|
*/
|
|
if (cmd == GPIOHANDLE_GET_LINE_VALUES_IOCTL) {
|
|
int val;
|
|
|
|
memset(&ghd, 0, sizeof(ghd));
|
|
|
|
val = gpiod_get_value_cansleep(le->desc);
|
|
if (val < 0)
|
|
return val;
|
|
ghd.values[0] = val;
|
|
|
|
if (copy_to_user(ip, &ghd, sizeof(ghd)))
|
|
return -EFAULT;
|
|
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
#ifdef CONFIG_COMPAT
|
|
static long lineevent_ioctl_compat(struct file *filep, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
return lineevent_ioctl(filep, cmd, (unsigned long)compat_ptr(arg));
|
|
}
|
|
#endif
|
|
|
|
static const struct file_operations lineevent_fileops = {
|
|
.release = lineevent_release,
|
|
.read = lineevent_read,
|
|
.poll = lineevent_poll,
|
|
.owner = THIS_MODULE,
|
|
.llseek = noop_llseek,
|
|
.unlocked_ioctl = lineevent_ioctl,
|
|
#ifdef CONFIG_COMPAT
|
|
.compat_ioctl = lineevent_ioctl_compat,
|
|
#endif
|
|
};
|
|
|
|
static irqreturn_t lineevent_irq_thread(int irq, void *p)
|
|
{
|
|
struct lineevent_state *le = p;
|
|
struct gpioevent_data ge;
|
|
int ret;
|
|
|
|
/* Do not leak kernel stack to userspace */
|
|
memset(&ge, 0, sizeof(ge));
|
|
|
|
/*
|
|
* We may be running from a nested threaded interrupt in which case
|
|
* we didn't get the timestamp from lineevent_irq_handler().
|
|
*/
|
|
if (!le->timestamp)
|
|
ge.timestamp = ktime_get_real_ns();
|
|
else
|
|
ge.timestamp = le->timestamp;
|
|
|
|
if (le->eflags & GPIOEVENT_REQUEST_RISING_EDGE
|
|
&& le->eflags & GPIOEVENT_REQUEST_FALLING_EDGE) {
|
|
int level = gpiod_get_value_cansleep(le->desc);
|
|
if (level)
|
|
/* Emit low-to-high event */
|
|
ge.id = GPIOEVENT_EVENT_RISING_EDGE;
|
|
else
|
|
/* Emit high-to-low event */
|
|
ge.id = GPIOEVENT_EVENT_FALLING_EDGE;
|
|
} else if (le->eflags & GPIOEVENT_REQUEST_RISING_EDGE) {
|
|
/* Emit low-to-high event */
|
|
ge.id = GPIOEVENT_EVENT_RISING_EDGE;
|
|
} else if (le->eflags & GPIOEVENT_REQUEST_FALLING_EDGE) {
|
|
/* Emit high-to-low event */
|
|
ge.id = GPIOEVENT_EVENT_FALLING_EDGE;
|
|
} else {
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
ret = kfifo_put(&le->events, ge);
|
|
if (ret != 0)
|
|
wake_up_poll(&le->wait, EPOLLIN);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t lineevent_irq_handler(int irq, void *p)
|
|
{
|
|
struct lineevent_state *le = p;
|
|
|
|
/*
|
|
* Just store the timestamp in hardirq context so we get it as
|
|
* close in time as possible to the actual event.
|
|
*/
|
|
le->timestamp = ktime_get_real_ns();
|
|
|
|
return IRQ_WAKE_THREAD;
|
|
}
|
|
|
|
static int lineevent_create(struct gpio_device *gdev, void __user *ip)
|
|
{
|
|
struct gpioevent_request eventreq;
|
|
struct lineevent_state *le;
|
|
struct gpio_desc *desc;
|
|
struct file *file;
|
|
u32 offset;
|
|
u32 lflags;
|
|
u32 eflags;
|
|
int fd;
|
|
int ret;
|
|
int irqflags = 0;
|
|
|
|
if (copy_from_user(&eventreq, ip, sizeof(eventreq)))
|
|
return -EFAULT;
|
|
|
|
le = kzalloc(sizeof(*le), GFP_KERNEL);
|
|
if (!le)
|
|
return -ENOMEM;
|
|
le->gdev = gdev;
|
|
get_device(&gdev->dev);
|
|
|
|
/* Make sure this is terminated */
|
|
eventreq.consumer_label[sizeof(eventreq.consumer_label)-1] = '\0';
|
|
if (strlen(eventreq.consumer_label)) {
|
|
le->label = kstrdup(eventreq.consumer_label,
|
|
GFP_KERNEL);
|
|
if (!le->label) {
|
|
ret = -ENOMEM;
|
|
goto out_free_le;
|
|
}
|
|
}
|
|
|
|
offset = eventreq.lineoffset;
|
|
lflags = eventreq.handleflags;
|
|
eflags = eventreq.eventflags;
|
|
|
|
if (offset >= gdev->ngpio) {
|
|
ret = -EINVAL;
|
|
goto out_free_label;
|
|
}
|
|
|
|
/* Return an error if a unknown flag is set */
|
|
if ((lflags & ~GPIOHANDLE_REQUEST_VALID_FLAGS) ||
|
|
(eflags & ~GPIOEVENT_REQUEST_VALID_FLAGS)) {
|
|
ret = -EINVAL;
|
|
goto out_free_label;
|
|
}
|
|
|
|
/* This is just wrong: we don't look for events on output lines */
|
|
if (lflags & GPIOHANDLE_REQUEST_OUTPUT) {
|
|
ret = -EINVAL;
|
|
goto out_free_label;
|
|
}
|
|
|
|
desc = &gdev->descs[offset];
|
|
ret = gpiod_request(desc, le->label);
|
|
if (ret)
|
|
goto out_free_label;
|
|
le->desc = desc;
|
|
le->eflags = eflags;
|
|
|
|
if (lflags & GPIOHANDLE_REQUEST_ACTIVE_LOW)
|
|
set_bit(FLAG_ACTIVE_LOW, &desc->flags);
|
|
if (lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN)
|
|
set_bit(FLAG_OPEN_DRAIN, &desc->flags);
|
|
if (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE)
|
|
set_bit(FLAG_OPEN_SOURCE, &desc->flags);
|
|
|
|
ret = gpiod_direction_input(desc);
|
|
if (ret)
|
|
goto out_free_desc;
|
|
|
|
le->irq = gpiod_to_irq(desc);
|
|
if (le->irq <= 0) {
|
|
ret = -ENODEV;
|
|
goto out_free_desc;
|
|
}
|
|
|
|
if (eflags & GPIOEVENT_REQUEST_RISING_EDGE)
|
|
irqflags |= IRQF_TRIGGER_RISING;
|
|
if (eflags & GPIOEVENT_REQUEST_FALLING_EDGE)
|
|
irqflags |= IRQF_TRIGGER_FALLING;
|
|
irqflags |= IRQF_ONESHOT;
|
|
|
|
INIT_KFIFO(le->events);
|
|
init_waitqueue_head(&le->wait);
|
|
mutex_init(&le->read_lock);
|
|
|
|
/* Request a thread to read the events */
|
|
ret = request_threaded_irq(le->irq,
|
|
lineevent_irq_handler,
|
|
lineevent_irq_thread,
|
|
irqflags,
|
|
le->label,
|
|
le);
|
|
if (ret)
|
|
goto out_free_desc;
|
|
|
|
fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC);
|
|
if (fd < 0) {
|
|
ret = fd;
|
|
goto out_free_irq;
|
|
}
|
|
|
|
file = anon_inode_getfile("gpio-event",
|
|
&lineevent_fileops,
|
|
le,
|
|
O_RDONLY | O_CLOEXEC);
|
|
if (IS_ERR(file)) {
|
|
ret = PTR_ERR(file);
|
|
goto out_put_unused_fd;
|
|
}
|
|
|
|
eventreq.fd = fd;
|
|
if (copy_to_user(ip, &eventreq, sizeof(eventreq))) {
|
|
/*
|
|
* fput() will trigger the release() callback, so do not go onto
|
|
* the regular error cleanup path here.
|
|
*/
|
|
fput(file);
|
|
put_unused_fd(fd);
|
|
return -EFAULT;
|
|
}
|
|
|
|
fd_install(fd, file);
|
|
|
|
return 0;
|
|
|
|
out_put_unused_fd:
|
|
put_unused_fd(fd);
|
|
out_free_irq:
|
|
free_irq(le->irq, le);
|
|
out_free_desc:
|
|
gpiod_free(le->desc);
|
|
out_free_label:
|
|
kfree(le->label);
|
|
out_free_le:
|
|
kfree(le);
|
|
put_device(&gdev->dev);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* gpio_ioctl() - ioctl handler for the GPIO chardev
|
|
*/
|
|
static long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct gpio_device *gdev = filp->private_data;
|
|
struct gpio_chip *chip = gdev->chip;
|
|
void __user *ip = (void __user *)arg;
|
|
|
|
/* We fail any subsequent ioctl():s when the chip is gone */
|
|
if (!chip)
|
|
return -ENODEV;
|
|
|
|
/* Fill in the struct and pass to userspace */
|
|
if (cmd == GPIO_GET_CHIPINFO_IOCTL) {
|
|
struct gpiochip_info chipinfo;
|
|
|
|
memset(&chipinfo, 0, sizeof(chipinfo));
|
|
|
|
strncpy(chipinfo.name, dev_name(&gdev->dev),
|
|
sizeof(chipinfo.name));
|
|
chipinfo.name[sizeof(chipinfo.name)-1] = '\0';
|
|
strncpy(chipinfo.label, gdev->label,
|
|
sizeof(chipinfo.label));
|
|
chipinfo.label[sizeof(chipinfo.label)-1] = '\0';
|
|
chipinfo.lines = gdev->ngpio;
|
|
if (copy_to_user(ip, &chipinfo, sizeof(chipinfo)))
|
|
return -EFAULT;
|
|
return 0;
|
|
} else if (cmd == GPIO_GET_LINEINFO_IOCTL) {
|
|
struct gpioline_info lineinfo;
|
|
struct gpio_desc *desc;
|
|
|
|
if (copy_from_user(&lineinfo, ip, sizeof(lineinfo)))
|
|
return -EFAULT;
|
|
if (lineinfo.line_offset >= gdev->ngpio)
|
|
return -EINVAL;
|
|
|
|
desc = &gdev->descs[lineinfo.line_offset];
|
|
if (desc->name) {
|
|
strncpy(lineinfo.name, desc->name,
|
|
sizeof(lineinfo.name));
|
|
lineinfo.name[sizeof(lineinfo.name)-1] = '\0';
|
|
} else {
|
|
lineinfo.name[0] = '\0';
|
|
}
|
|
if (desc->label) {
|
|
strncpy(lineinfo.consumer, desc->label,
|
|
sizeof(lineinfo.consumer));
|
|
lineinfo.consumer[sizeof(lineinfo.consumer)-1] = '\0';
|
|
} else {
|
|
lineinfo.consumer[0] = '\0';
|
|
}
|
|
|
|
/*
|
|
* Userspace only need to know that the kernel is using
|
|
* this GPIO so it can't use it.
|
|
*/
|
|
lineinfo.flags = 0;
|
|
if (test_bit(FLAG_REQUESTED, &desc->flags) ||
|
|
test_bit(FLAG_IS_HOGGED, &desc->flags) ||
|
|
test_bit(FLAG_USED_AS_IRQ, &desc->flags) ||
|
|
test_bit(FLAG_EXPORT, &desc->flags) ||
|
|
test_bit(FLAG_SYSFS, &desc->flags))
|
|
lineinfo.flags |= GPIOLINE_FLAG_KERNEL;
|
|
if (test_bit(FLAG_IS_OUT, &desc->flags))
|
|
lineinfo.flags |= GPIOLINE_FLAG_IS_OUT;
|
|
if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
|
|
lineinfo.flags |= GPIOLINE_FLAG_ACTIVE_LOW;
|
|
if (test_bit(FLAG_OPEN_DRAIN, &desc->flags))
|
|
lineinfo.flags |= GPIOLINE_FLAG_OPEN_DRAIN;
|
|
if (test_bit(FLAG_OPEN_SOURCE, &desc->flags))
|
|
lineinfo.flags |= GPIOLINE_FLAG_OPEN_SOURCE;
|
|
|
|
if (copy_to_user(ip, &lineinfo, sizeof(lineinfo)))
|
|
return -EFAULT;
|
|
return 0;
|
|
} else if (cmd == GPIO_GET_LINEHANDLE_IOCTL) {
|
|
return linehandle_create(gdev, ip);
|
|
} else if (cmd == GPIO_GET_LINEEVENT_IOCTL) {
|
|
return lineevent_create(gdev, ip);
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
#ifdef CONFIG_COMPAT
|
|
static long gpio_ioctl_compat(struct file *filp, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
return gpio_ioctl(filp, cmd, (unsigned long)compat_ptr(arg));
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* gpio_chrdev_open() - open the chardev for ioctl operations
|
|
* @inode: inode for this chardev
|
|
* @filp: file struct for storing private data
|
|
* Returns 0 on success
|
|
*/
|
|
static int gpio_chrdev_open(struct inode *inode, struct file *filp)
|
|
{
|
|
struct gpio_device *gdev = container_of(inode->i_cdev,
|
|
struct gpio_device, chrdev);
|
|
|
|
/* Fail on open if the backing gpiochip is gone */
|
|
if (!gdev->chip)
|
|
return -ENODEV;
|
|
get_device(&gdev->dev);
|
|
filp->private_data = gdev;
|
|
|
|
return nonseekable_open(inode, filp);
|
|
}
|
|
|
|
/**
|
|
* gpio_chrdev_release() - close chardev after ioctl operations
|
|
* @inode: inode for this chardev
|
|
* @filp: file struct for storing private data
|
|
* Returns 0 on success
|
|
*/
|
|
static int gpio_chrdev_release(struct inode *inode, struct file *filp)
|
|
{
|
|
struct gpio_device *gdev = container_of(inode->i_cdev,
|
|
struct gpio_device, chrdev);
|
|
|
|
put_device(&gdev->dev);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static const struct file_operations gpio_fileops = {
|
|
.release = gpio_chrdev_release,
|
|
.open = gpio_chrdev_open,
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.unlocked_ioctl = gpio_ioctl,
|
|
#ifdef CONFIG_COMPAT
|
|
.compat_ioctl = gpio_ioctl_compat,
|
|
#endif
|
|
};
|
|
|
|
static void gpiodevice_release(struct device *dev)
|
|
{
|
|
struct gpio_device *gdev = dev_get_drvdata(dev);
|
|
|
|
list_del(&gdev->list);
|
|
ida_simple_remove(&gpio_ida, gdev->id);
|
|
kfree_const(gdev->label);
|
|
kfree(gdev->descs);
|
|
kfree(gdev);
|
|
}
|
|
|
|
static int gpiochip_setup_dev(struct gpio_device *gdev)
|
|
{
|
|
int status;
|
|
|
|
cdev_init(&gdev->chrdev, &gpio_fileops);
|
|
gdev->chrdev.owner = THIS_MODULE;
|
|
gdev->dev.devt = MKDEV(MAJOR(gpio_devt), gdev->id);
|
|
|
|
status = cdev_device_add(&gdev->chrdev, &gdev->dev);
|
|
if (status)
|
|
return status;
|
|
|
|
chip_dbg(gdev->chip, "added GPIO chardev (%d:%d)\n",
|
|
MAJOR(gpio_devt), gdev->id);
|
|
|
|
status = gpiochip_sysfs_register(gdev);
|
|
if (status)
|
|
goto err_remove_device;
|
|
|
|
/* From this point, the .release() function cleans up gpio_device */
|
|
gdev->dev.release = gpiodevice_release;
|
|
pr_debug("%s: registered GPIOs %d to %d on device: %s (%s)\n",
|
|
__func__, gdev->base, gdev->base + gdev->ngpio - 1,
|
|
dev_name(&gdev->dev), gdev->chip->label ? : "generic");
|
|
|
|
return 0;
|
|
|
|
err_remove_device:
|
|
cdev_device_del(&gdev->chrdev, &gdev->dev);
|
|
return status;
|
|
}
|
|
|
|
static void gpiochip_machine_hog(struct gpio_chip *chip, struct gpiod_hog *hog)
|
|
{
|
|
struct gpio_desc *desc;
|
|
int rv;
|
|
|
|
desc = gpiochip_get_desc(chip, hog->chip_hwnum);
|
|
if (IS_ERR(desc)) {
|
|
pr_err("%s: unable to get GPIO desc: %ld\n",
|
|
__func__, PTR_ERR(desc));
|
|
return;
|
|
}
|
|
|
|
if (test_bit(FLAG_IS_HOGGED, &desc->flags))
|
|
return;
|
|
|
|
rv = gpiod_hog(desc, hog->line_name, hog->lflags, hog->dflags);
|
|
if (rv)
|
|
pr_err("%s: unable to hog GPIO line (%s:%u): %d\n",
|
|
__func__, chip->label, hog->chip_hwnum, rv);
|
|
}
|
|
|
|
static void machine_gpiochip_add(struct gpio_chip *chip)
|
|
{
|
|
struct gpiod_hog *hog;
|
|
|
|
mutex_lock(&gpio_machine_hogs_mutex);
|
|
|
|
list_for_each_entry(hog, &gpio_machine_hogs, list) {
|
|
if (!strcmp(chip->label, hog->chip_label))
|
|
gpiochip_machine_hog(chip, hog);
|
|
}
|
|
|
|
mutex_unlock(&gpio_machine_hogs_mutex);
|
|
}
|
|
|
|
static void gpiochip_setup_devs(void)
|
|
{
|
|
struct gpio_device *gdev;
|
|
int err;
|
|
|
|
list_for_each_entry(gdev, &gpio_devices, list) {
|
|
err = gpiochip_setup_dev(gdev);
|
|
if (err)
|
|
pr_err("%s: Failed to initialize gpio device (%d)\n",
|
|
dev_name(&gdev->dev), err);
|
|
}
|
|
}
|
|
|
|
int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data,
|
|
struct lock_class_key *lock_key,
|
|
struct lock_class_key *request_key)
|
|
{
|
|
unsigned long flags;
|
|
int status = 0;
|
|
unsigned i;
|
|
int base = chip->base;
|
|
struct gpio_device *gdev;
|
|
|
|
/*
|
|
* First: allocate and populate the internal stat container, and
|
|
* set up the struct device.
|
|
*/
|
|
gdev = kzalloc(sizeof(*gdev), GFP_KERNEL);
|
|
if (!gdev)
|
|
return -ENOMEM;
|
|
gdev->dev.bus = &gpio_bus_type;
|
|
gdev->chip = chip;
|
|
chip->gpiodev = gdev;
|
|
if (chip->parent) {
|
|
gdev->dev.parent = chip->parent;
|
|
gdev->dev.of_node = chip->parent->of_node;
|
|
}
|
|
|
|
#ifdef CONFIG_OF_GPIO
|
|
/* If the gpiochip has an assigned OF node this takes precedence */
|
|
if (chip->of_node)
|
|
gdev->dev.of_node = chip->of_node;
|
|
else
|
|
chip->of_node = gdev->dev.of_node;
|
|
#endif
|
|
|
|
gdev->id = ida_simple_get(&gpio_ida, 0, 0, GFP_KERNEL);
|
|
if (gdev->id < 0) {
|
|
status = gdev->id;
|
|
goto err_free_gdev;
|
|
}
|
|
dev_set_name(&gdev->dev, "gpiochip%d", gdev->id);
|
|
device_initialize(&gdev->dev);
|
|
dev_set_drvdata(&gdev->dev, gdev);
|
|
if (chip->parent && chip->parent->driver)
|
|
gdev->owner = chip->parent->driver->owner;
|
|
else if (chip->owner)
|
|
/* TODO: remove chip->owner */
|
|
gdev->owner = chip->owner;
|
|
else
|
|
gdev->owner = THIS_MODULE;
|
|
|
|
gdev->descs = kcalloc(chip->ngpio, sizeof(gdev->descs[0]), GFP_KERNEL);
|
|
if (!gdev->descs) {
|
|
status = -ENOMEM;
|
|
goto err_free_ida;
|
|
}
|
|
|
|
if (chip->ngpio == 0) {
|
|
chip_err(chip, "tried to insert a GPIO chip with zero lines\n");
|
|
status = -EINVAL;
|
|
goto err_free_descs;
|
|
}
|
|
|
|
if (chip->ngpio > FASTPATH_NGPIO)
|
|
chip_warn(chip, "line cnt %u is greater than fast path cnt %u\n",
|
|
chip->ngpio, FASTPATH_NGPIO);
|
|
|
|
gdev->label = kstrdup_const(chip->label ?: "unknown", GFP_KERNEL);
|
|
if (!gdev->label) {
|
|
status = -ENOMEM;
|
|
goto err_free_descs;
|
|
}
|
|
|
|
gdev->ngpio = chip->ngpio;
|
|
gdev->data = data;
|
|
|
|
spin_lock_irqsave(&gpio_lock, flags);
|
|
|
|
/*
|
|
* TODO: this allocates a Linux GPIO number base in the global
|
|
* GPIO numberspace for this chip. In the long run we want to
|
|
* get *rid* of this numberspace and use only descriptors, but
|
|
* it may be a pipe dream. It will not happen before we get rid
|
|
* of the sysfs interface anyways.
|
|
*/
|
|
if (base < 0) {
|
|
base = gpiochip_find_base(chip->ngpio);
|
|
if (base < 0) {
|
|
status = base;
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
goto err_free_label;
|
|
}
|
|
/*
|
|
* TODO: it should not be necessary to reflect the assigned
|
|
* base outside of the GPIO subsystem. Go over drivers and
|
|
* see if anyone makes use of this, else drop this and assign
|
|
* a poison instead.
|
|
*/
|
|
chip->base = base;
|
|
}
|
|
gdev->base = base;
|
|
|
|
status = gpiodev_add_to_list(gdev);
|
|
if (status) {
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
goto err_free_label;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
|
|
for (i = 0; i < chip->ngpio; i++)
|
|
gdev->descs[i].gdev = gdev;
|
|
|
|
#ifdef CONFIG_PINCTRL
|
|
INIT_LIST_HEAD(&gdev->pin_ranges);
|
|
#endif
|
|
|
|
status = gpiochip_set_desc_names(chip);
|
|
if (status)
|
|
goto err_remove_from_list;
|
|
|
|
status = gpiochip_irqchip_init_valid_mask(chip);
|
|
if (status)
|
|
goto err_remove_from_list;
|
|
|
|
status = gpiochip_alloc_valid_mask(chip);
|
|
if (status)
|
|
goto err_remove_irqchip_mask;
|
|
|
|
status = gpiochip_add_irqchip(chip, lock_key, request_key);
|
|
if (status)
|
|
goto err_free_gpiochip_mask;
|
|
|
|
status = of_gpiochip_add(chip);
|
|
if (status)
|
|
goto err_remove_chip;
|
|
|
|
status = gpiochip_init_valid_mask(chip);
|
|
if (status)
|
|
goto err_remove_of_chip;
|
|
|
|
for (i = 0; i < chip->ngpio; i++) {
|
|
struct gpio_desc *desc = &gdev->descs[i];
|
|
|
|
if (chip->get_direction && gpiochip_line_is_valid(chip, i))
|
|
desc->flags = !chip->get_direction(chip, i) ?
|
|
(1 << FLAG_IS_OUT) : 0;
|
|
else
|
|
desc->flags = !chip->direction_input ?
|
|
(1 << FLAG_IS_OUT) : 0;
|
|
}
|
|
|
|
acpi_gpiochip_add(chip);
|
|
|
|
machine_gpiochip_add(chip);
|
|
|
|
/*
|
|
* By first adding the chardev, and then adding the device,
|
|
* we get a device node entry in sysfs under
|
|
* /sys/bus/gpio/devices/gpiochipN/dev that can be used for
|
|
* coldplug of device nodes and other udev business.
|
|
* We can do this only if gpiolib has been initialized.
|
|
* Otherwise, defer until later.
|
|
*/
|
|
if (gpiolib_initialized) {
|
|
status = gpiochip_setup_dev(gdev);
|
|
if (status)
|
|
goto err_remove_acpi_chip;
|
|
}
|
|
return 0;
|
|
|
|
err_remove_acpi_chip:
|
|
acpi_gpiochip_remove(chip);
|
|
err_remove_of_chip:
|
|
gpiochip_free_hogs(chip);
|
|
of_gpiochip_remove(chip);
|
|
err_remove_chip:
|
|
gpiochip_irqchip_remove(chip);
|
|
err_free_gpiochip_mask:
|
|
gpiochip_free_valid_mask(chip);
|
|
err_remove_irqchip_mask:
|
|
gpiochip_irqchip_free_valid_mask(chip);
|
|
err_remove_from_list:
|
|
spin_lock_irqsave(&gpio_lock, flags);
|
|
list_del(&gdev->list);
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
err_free_label:
|
|
kfree_const(gdev->label);
|
|
err_free_descs:
|
|
kfree(gdev->descs);
|
|
err_free_ida:
|
|
ida_simple_remove(&gpio_ida, gdev->id);
|
|
err_free_gdev:
|
|
/* failures here can mean systems won't boot... */
|
|
pr_err("%s: GPIOs %d..%d (%s) failed to register, %d\n", __func__,
|
|
gdev->base, gdev->base + gdev->ngpio - 1,
|
|
chip->label ? : "generic", status);
|
|
kfree(gdev);
|
|
return status;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_add_data_with_key);
|
|
|
|
/**
|
|
* gpiochip_get_data() - get per-subdriver data for the chip
|
|
* @chip: GPIO chip
|
|
*
|
|
* Returns:
|
|
* The per-subdriver data for the chip.
|
|
*/
|
|
void *gpiochip_get_data(struct gpio_chip *chip)
|
|
{
|
|
return chip->gpiodev->data;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_get_data);
|
|
|
|
/**
|
|
* gpiochip_remove() - unregister a gpio_chip
|
|
* @chip: the chip to unregister
|
|
*
|
|
* A gpio_chip with any GPIOs still requested may not be removed.
|
|
*/
|
|
void gpiochip_remove(struct gpio_chip *chip)
|
|
{
|
|
struct gpio_device *gdev = chip->gpiodev;
|
|
struct gpio_desc *desc;
|
|
unsigned long flags;
|
|
unsigned i;
|
|
bool requested = false;
|
|
|
|
/* FIXME: should the legacy sysfs handling be moved to gpio_device? */
|
|
gpiochip_sysfs_unregister(gdev);
|
|
gpiochip_free_hogs(chip);
|
|
/* Numb the device, cancelling all outstanding operations */
|
|
gdev->chip = NULL;
|
|
gpiochip_irqchip_remove(chip);
|
|
acpi_gpiochip_remove(chip);
|
|
gpiochip_remove_pin_ranges(chip);
|
|
of_gpiochip_remove(chip);
|
|
gpiochip_free_valid_mask(chip);
|
|
/*
|
|
* We accept no more calls into the driver from this point, so
|
|
* NULL the driver data pointer
|
|
*/
|
|
gdev->data = NULL;
|
|
|
|
spin_lock_irqsave(&gpio_lock, flags);
|
|
for (i = 0; i < gdev->ngpio; i++) {
|
|
desc = &gdev->descs[i];
|
|
if (test_bit(FLAG_REQUESTED, &desc->flags))
|
|
requested = true;
|
|
}
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
|
|
if (requested)
|
|
dev_crit(&gdev->dev,
|
|
"REMOVING GPIOCHIP WITH GPIOS STILL REQUESTED\n");
|
|
|
|
/*
|
|
* The gpiochip side puts its use of the device to rest here:
|
|
* if there are no userspace clients, the chardev and device will
|
|
* be removed, else it will be dangling until the last user is
|
|
* gone.
|
|
*/
|
|
cdev_device_del(&gdev->chrdev, &gdev->dev);
|
|
put_device(&gdev->dev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_remove);
|
|
|
|
static void devm_gpio_chip_release(struct device *dev, void *res)
|
|
{
|
|
struct gpio_chip *chip = *(struct gpio_chip **)res;
|
|
|
|
gpiochip_remove(chip);
|
|
}
|
|
|
|
/**
|
|
* devm_gpiochip_add_data() - Resource manager gpiochip_add_data()
|
|
* @dev: pointer to the device that gpio_chip belongs to.
|
|
* @chip: the chip to register, with chip->base initialized
|
|
* @data: driver-private data associated with this chip
|
|
*
|
|
* Context: potentially before irqs will work
|
|
*
|
|
* The gpio chip automatically be released when the device is unbound.
|
|
*
|
|
* Returns:
|
|
* A negative errno if the chip can't be registered, such as because the
|
|
* chip->base is invalid or already associated with a different chip.
|
|
* Otherwise it returns zero as a success code.
|
|
*/
|
|
int devm_gpiochip_add_data(struct device *dev, struct gpio_chip *chip,
|
|
void *data)
|
|
{
|
|
struct gpio_chip **ptr;
|
|
int ret;
|
|
|
|
ptr = devres_alloc(devm_gpio_chip_release, sizeof(*ptr),
|
|
GFP_KERNEL);
|
|
if (!ptr)
|
|
return -ENOMEM;
|
|
|
|
ret = gpiochip_add_data(chip, data);
|
|
if (ret < 0) {
|
|
devres_free(ptr);
|
|
return ret;
|
|
}
|
|
|
|
*ptr = chip;
|
|
devres_add(dev, ptr);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(devm_gpiochip_add_data);
|
|
|
|
/**
|
|
* gpiochip_find() - iterator for locating a specific gpio_chip
|
|
* @data: data to pass to match function
|
|
* @match: Callback function to check gpio_chip
|
|
*
|
|
* Similar to bus_find_device. It returns a reference to a gpio_chip as
|
|
* determined by a user supplied @match callback. The callback should return
|
|
* 0 if the device doesn't match and non-zero if it does. If the callback is
|
|
* non-zero, this function will return to the caller and not iterate over any
|
|
* more gpio_chips.
|
|
*/
|
|
struct gpio_chip *gpiochip_find(void *data,
|
|
int (*match)(struct gpio_chip *chip,
|
|
void *data))
|
|
{
|
|
struct gpio_device *gdev;
|
|
struct gpio_chip *chip = NULL;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&gpio_lock, flags);
|
|
list_for_each_entry(gdev, &gpio_devices, list)
|
|
if (gdev->chip && match(gdev->chip, data)) {
|
|
chip = gdev->chip;
|
|
break;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
|
|
return chip;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_find);
|
|
|
|
static int gpiochip_match_name(struct gpio_chip *chip, void *data)
|
|
{
|
|
const char *name = data;
|
|
|
|
return !strcmp(chip->label, name);
|
|
}
|
|
|
|
static struct gpio_chip *find_chip_by_name(const char *name)
|
|
{
|
|
return gpiochip_find((void *)name, gpiochip_match_name);
|
|
}
|
|
|
|
#ifdef CONFIG_GPIOLIB_IRQCHIP
|
|
|
|
/*
|
|
* The following is irqchip helper code for gpiochips.
|
|
*/
|
|
|
|
static int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gpiochip)
|
|
{
|
|
if (!gpiochip->irq.need_valid_mask)
|
|
return 0;
|
|
|
|
gpiochip->irq.valid_mask = gpiochip_allocate_mask(gpiochip);
|
|
if (!gpiochip->irq.valid_mask)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gpiochip)
|
|
{
|
|
kfree(gpiochip->irq.valid_mask);
|
|
gpiochip->irq.valid_mask = NULL;
|
|
}
|
|
|
|
bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gpiochip,
|
|
unsigned int offset)
|
|
{
|
|
if (!gpiochip_line_is_valid(gpiochip, offset))
|
|
return false;
|
|
/* No mask means all valid */
|
|
if (likely(!gpiochip->irq.valid_mask))
|
|
return true;
|
|
return test_bit(offset, gpiochip->irq.valid_mask);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_irqchip_irq_valid);
|
|
|
|
/**
|
|
* gpiochip_set_cascaded_irqchip() - connects a cascaded irqchip to a gpiochip
|
|
* @gpiochip: the gpiochip to set the irqchip chain to
|
|
* @parent_irq: the irq number corresponding to the parent IRQ for this
|
|
* chained irqchip
|
|
* @parent_handler: the parent interrupt handler for the accumulated IRQ
|
|
* coming out of the gpiochip. If the interrupt is nested rather than
|
|
* cascaded, pass NULL in this handler argument
|
|
*/
|
|
static void gpiochip_set_cascaded_irqchip(struct gpio_chip *gpiochip,
|
|
unsigned int parent_irq,
|
|
irq_flow_handler_t parent_handler)
|
|
{
|
|
if (!gpiochip->irq.domain) {
|
|
chip_err(gpiochip, "called %s before setting up irqchip\n",
|
|
__func__);
|
|
return;
|
|
}
|
|
|
|
if (parent_handler) {
|
|
if (gpiochip->can_sleep) {
|
|
chip_err(gpiochip,
|
|
"you cannot have chained interrupts on a chip that may sleep\n");
|
|
return;
|
|
}
|
|
/*
|
|
* The parent irqchip is already using the chip_data for this
|
|
* irqchip, so our callbacks simply use the handler_data.
|
|
*/
|
|
irq_set_chained_handler_and_data(parent_irq, parent_handler,
|
|
gpiochip);
|
|
|
|
gpiochip->irq.parent_irq = parent_irq;
|
|
gpiochip->irq.parents = &gpiochip->irq.parent_irq;
|
|
gpiochip->irq.num_parents = 1;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* gpiochip_set_chained_irqchip() - connects a chained irqchip to a gpiochip
|
|
* @gpiochip: the gpiochip to set the irqchip chain to
|
|
* @irqchip: the irqchip to chain to the gpiochip
|
|
* @parent_irq: the irq number corresponding to the parent IRQ for this
|
|
* chained irqchip
|
|
* @parent_handler: the parent interrupt handler for the accumulated IRQ
|
|
* coming out of the gpiochip.
|
|
*/
|
|
void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip,
|
|
struct irq_chip *irqchip,
|
|
unsigned int parent_irq,
|
|
irq_flow_handler_t parent_handler)
|
|
{
|
|
if (gpiochip->irq.threaded) {
|
|
chip_err(gpiochip, "tried to chain a threaded gpiochip\n");
|
|
return;
|
|
}
|
|
|
|
gpiochip_set_cascaded_irqchip(gpiochip, parent_irq, parent_handler);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_set_chained_irqchip);
|
|
|
|
/**
|
|
* gpiochip_set_nested_irqchip() - connects a nested irqchip to a gpiochip
|
|
* @gpiochip: the gpiochip to set the irqchip nested handler to
|
|
* @irqchip: the irqchip to nest to the gpiochip
|
|
* @parent_irq: the irq number corresponding to the parent IRQ for this
|
|
* nested irqchip
|
|
*/
|
|
void gpiochip_set_nested_irqchip(struct gpio_chip *gpiochip,
|
|
struct irq_chip *irqchip,
|
|
unsigned int parent_irq)
|
|
{
|
|
gpiochip_set_cascaded_irqchip(gpiochip, parent_irq, NULL);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_set_nested_irqchip);
|
|
|
|
/**
|
|
* gpiochip_irq_map() - maps an IRQ into a GPIO irqchip
|
|
* @d: the irqdomain used by this irqchip
|
|
* @irq: the global irq number used by this GPIO irqchip irq
|
|
* @hwirq: the local IRQ/GPIO line offset on this gpiochip
|
|
*
|
|
* This function will set up the mapping for a certain IRQ line on a
|
|
* gpiochip by assigning the gpiochip as chip data, and using the irqchip
|
|
* stored inside the gpiochip.
|
|
*/
|
|
int gpiochip_irq_map(struct irq_domain *d, unsigned int irq,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
struct gpio_chip *chip = d->host_data;
|
|
int err = 0;
|
|
|
|
if (!gpiochip_irqchip_irq_valid(chip, hwirq))
|
|
return -ENXIO;
|
|
|
|
irq_set_chip_data(irq, chip);
|
|
/*
|
|
* This lock class tells lockdep that GPIO irqs are in a different
|
|
* category than their parents, so it won't report false recursion.
|
|
*/
|
|
irq_set_lockdep_class(irq, chip->irq.lock_key, chip->irq.request_key);
|
|
irq_set_chip_and_handler(irq, chip->irq.chip, chip->irq.handler);
|
|
/* Chips that use nested thread handlers have them marked */
|
|
if (chip->irq.threaded)
|
|
irq_set_nested_thread(irq, 1);
|
|
irq_set_noprobe(irq);
|
|
|
|
if (chip->irq.num_parents == 1)
|
|
err = irq_set_parent(irq, chip->irq.parents[0]);
|
|
else if (chip->irq.map)
|
|
err = irq_set_parent(irq, chip->irq.map[hwirq]);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/*
|
|
* No set-up of the hardware will happen if IRQ_TYPE_NONE
|
|
* is passed as default type.
|
|
*/
|
|
if (chip->irq.default_type != IRQ_TYPE_NONE)
|
|
irq_set_irq_type(irq, chip->irq.default_type);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_irq_map);
|
|
|
|
void gpiochip_irq_unmap(struct irq_domain *d, unsigned int irq)
|
|
{
|
|
struct gpio_chip *chip = d->host_data;
|
|
|
|
if (chip->irq.threaded)
|
|
irq_set_nested_thread(irq, 0);
|
|
irq_set_chip_and_handler(irq, NULL, NULL);
|
|
irq_set_chip_data(irq, NULL);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_irq_unmap);
|
|
|
|
static const struct irq_domain_ops gpiochip_domain_ops = {
|
|
.map = gpiochip_irq_map,
|
|
.unmap = gpiochip_irq_unmap,
|
|
/* Virtually all GPIO irqchips are twocell:ed */
|
|
.xlate = irq_domain_xlate_twocell,
|
|
};
|
|
|
|
/**
|
|
* gpiochip_irq_domain_activate() - Lock a GPIO to be used as an IRQ
|
|
* @domain: The IRQ domain used by this IRQ chip
|
|
* @data: Outermost irq_data associated with the IRQ
|
|
* @reserve: If set, only reserve an interrupt vector instead of assigning one
|
|
*
|
|
* This function is a wrapper that calls gpiochip_lock_as_irq() and is to be
|
|
* used as the activate function for the &struct irq_domain_ops. The host_data
|
|
* for the IRQ domain must be the &struct gpio_chip.
|
|
*/
|
|
int gpiochip_irq_domain_activate(struct irq_domain *domain,
|
|
struct irq_data *data, bool reserve)
|
|
{
|
|
struct gpio_chip *chip = domain->host_data;
|
|
|
|
return gpiochip_lock_as_irq(chip, data->hwirq);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_irq_domain_activate);
|
|
|
|
/**
|
|
* gpiochip_irq_domain_deactivate() - Unlock a GPIO used as an IRQ
|
|
* @domain: The IRQ domain used by this IRQ chip
|
|
* @data: Outermost irq_data associated with the IRQ
|
|
*
|
|
* This function is a wrapper that will call gpiochip_unlock_as_irq() and is to
|
|
* be used as the deactivate function for the &struct irq_domain_ops. The
|
|
* host_data for the IRQ domain must be the &struct gpio_chip.
|
|
*/
|
|
void gpiochip_irq_domain_deactivate(struct irq_domain *domain,
|
|
struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = domain->host_data;
|
|
|
|
return gpiochip_unlock_as_irq(chip, data->hwirq);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_irq_domain_deactivate);
|
|
|
|
static int gpiochip_to_irq(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
if (!gpiochip_irqchip_irq_valid(chip, offset))
|
|
return -ENXIO;
|
|
|
|
return irq_create_mapping(chip->irq.domain, offset);
|
|
}
|
|
|
|
static int gpiochip_irq_reqres(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
|
|
|
|
return gpiochip_reqres_irq(chip, d->hwirq);
|
|
}
|
|
|
|
static void gpiochip_irq_relres(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
|
|
|
|
gpiochip_relres_irq(chip, d->hwirq);
|
|
}
|
|
|
|
static void gpiochip_irq_enable(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
|
|
|
|
gpiochip_enable_irq(chip, d->hwirq);
|
|
if (chip->irq.irq_enable)
|
|
chip->irq.irq_enable(d);
|
|
else
|
|
chip->irq.chip->irq_unmask(d);
|
|
}
|
|
|
|
static void gpiochip_irq_disable(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
|
|
|
|
if (chip->irq.irq_disable)
|
|
chip->irq.irq_disable(d);
|
|
else
|
|
chip->irq.chip->irq_mask(d);
|
|
gpiochip_disable_irq(chip, d->hwirq);
|
|
}
|
|
|
|
static void gpiochip_set_irq_hooks(struct gpio_chip *gpiochip)
|
|
{
|
|
struct irq_chip *irqchip = gpiochip->irq.chip;
|
|
|
|
if (!irqchip->irq_request_resources &&
|
|
!irqchip->irq_release_resources) {
|
|
irqchip->irq_request_resources = gpiochip_irq_reqres;
|
|
irqchip->irq_release_resources = gpiochip_irq_relres;
|
|
}
|
|
if (WARN_ON(gpiochip->irq.irq_enable))
|
|
return;
|
|
/* Check if the irqchip already has this hook... */
|
|
if (irqchip->irq_enable == gpiochip_irq_enable) {
|
|
/*
|
|
* ...and if so, give a gentle warning that this is bad
|
|
* practice.
|
|
*/
|
|
chip_info(gpiochip,
|
|
"detected irqchip that is shared with multiple gpiochips: please fix the driver.\n");
|
|
return;
|
|
}
|
|
gpiochip->irq.irq_enable = irqchip->irq_enable;
|
|
gpiochip->irq.irq_disable = irqchip->irq_disable;
|
|
irqchip->irq_enable = gpiochip_irq_enable;
|
|
irqchip->irq_disable = gpiochip_irq_disable;
|
|
}
|
|
|
|
/**
|
|
* gpiochip_add_irqchip() - adds an IRQ chip to a GPIO chip
|
|
* @gpiochip: the GPIO chip to add the IRQ chip to
|
|
* @lock_key: lockdep class for IRQ lock
|
|
* @request_key: lockdep class for IRQ request
|
|
*/
|
|
static int gpiochip_add_irqchip(struct gpio_chip *gpiochip,
|
|
struct lock_class_key *lock_key,
|
|
struct lock_class_key *request_key)
|
|
{
|
|
struct irq_chip *irqchip = gpiochip->irq.chip;
|
|
const struct irq_domain_ops *ops;
|
|
struct device_node *np;
|
|
unsigned int type;
|
|
unsigned int i;
|
|
|
|
if (!irqchip)
|
|
return 0;
|
|
|
|
if (gpiochip->irq.parent_handler && gpiochip->can_sleep) {
|
|
chip_err(gpiochip, "you cannot have chained interrupts on a chip that may sleep\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
np = gpiochip->gpiodev->dev.of_node;
|
|
type = gpiochip->irq.default_type;
|
|
|
|
/*
|
|
* Specifying a default trigger is a terrible idea if DT or ACPI is
|
|
* used to configure the interrupts, as you may end up with
|
|
* conflicting triggers. Tell the user, and reset to NONE.
|
|
*/
|
|
if (WARN(np && type != IRQ_TYPE_NONE,
|
|
"%s: Ignoring %u default trigger\n", np->full_name, type))
|
|
type = IRQ_TYPE_NONE;
|
|
|
|
if (has_acpi_companion(gpiochip->parent) && type != IRQ_TYPE_NONE) {
|
|
acpi_handle_warn(ACPI_HANDLE(gpiochip->parent),
|
|
"Ignoring %u default trigger\n", type);
|
|
type = IRQ_TYPE_NONE;
|
|
}
|
|
|
|
gpiochip->to_irq = gpiochip_to_irq;
|
|
gpiochip->irq.default_type = type;
|
|
gpiochip->irq.lock_key = lock_key;
|
|
gpiochip->irq.request_key = request_key;
|
|
|
|
if (gpiochip->irq.domain_ops)
|
|
ops = gpiochip->irq.domain_ops;
|
|
else
|
|
ops = &gpiochip_domain_ops;
|
|
|
|
gpiochip->irq.domain = irq_domain_add_simple(np, gpiochip->ngpio,
|
|
gpiochip->irq.first,
|
|
ops, gpiochip);
|
|
if (!gpiochip->irq.domain)
|
|
return -EINVAL;
|
|
|
|
if (gpiochip->irq.parent_handler) {
|
|
void *data = gpiochip->irq.parent_handler_data ?: gpiochip;
|
|
|
|
for (i = 0; i < gpiochip->irq.num_parents; i++) {
|
|
/*
|
|
* The parent IRQ chip is already using the chip_data
|
|
* for this IRQ chip, so our callbacks simply use the
|
|
* handler_data.
|
|
*/
|
|
irq_set_chained_handler_and_data(gpiochip->irq.parents[i],
|
|
gpiochip->irq.parent_handler,
|
|
data);
|
|
}
|
|
}
|
|
|
|
gpiochip_set_irq_hooks(gpiochip);
|
|
|
|
acpi_gpiochip_request_interrupts(gpiochip);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* gpiochip_irqchip_remove() - removes an irqchip added to a gpiochip
|
|
* @gpiochip: the gpiochip to remove the irqchip from
|
|
*
|
|
* This is called only from gpiochip_remove()
|
|
*/
|
|
static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip)
|
|
{
|
|
struct irq_chip *irqchip = gpiochip->irq.chip;
|
|
unsigned int offset;
|
|
|
|
acpi_gpiochip_free_interrupts(gpiochip);
|
|
|
|
if (irqchip && gpiochip->irq.parent_handler) {
|
|
struct gpio_irq_chip *irq = &gpiochip->irq;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < irq->num_parents; i++)
|
|
irq_set_chained_handler_and_data(irq->parents[i],
|
|
NULL, NULL);
|
|
}
|
|
|
|
/* Remove all IRQ mappings and delete the domain */
|
|
if (gpiochip->irq.domain) {
|
|
unsigned int irq;
|
|
|
|
for (offset = 0; offset < gpiochip->ngpio; offset++) {
|
|
if (!gpiochip_irqchip_irq_valid(gpiochip, offset))
|
|
continue;
|
|
|
|
irq = irq_find_mapping(gpiochip->irq.domain, offset);
|
|
irq_dispose_mapping(irq);
|
|
}
|
|
|
|
irq_domain_remove(gpiochip->irq.domain);
|
|
}
|
|
|
|
if (irqchip) {
|
|
if (irqchip->irq_request_resources == gpiochip_irq_reqres) {
|
|
irqchip->irq_request_resources = NULL;
|
|
irqchip->irq_release_resources = NULL;
|
|
}
|
|
if (irqchip->irq_enable == gpiochip_irq_enable) {
|
|
irqchip->irq_enable = gpiochip->irq.irq_enable;
|
|
irqchip->irq_disable = gpiochip->irq.irq_disable;
|
|
}
|
|
}
|
|
gpiochip->irq.irq_enable = NULL;
|
|
gpiochip->irq.irq_disable = NULL;
|
|
gpiochip->irq.chip = NULL;
|
|
|
|
gpiochip_irqchip_free_valid_mask(gpiochip);
|
|
}
|
|
|
|
/**
|
|
* gpiochip_irqchip_add_key() - adds an irqchip to a gpiochip
|
|
* @gpiochip: the gpiochip to add the irqchip to
|
|
* @irqchip: the irqchip to add to the gpiochip
|
|
* @first_irq: if not dynamically assigned, the base (first) IRQ to
|
|
* allocate gpiochip irqs from
|
|
* @handler: the irq handler to use (often a predefined irq core function)
|
|
* @type: the default type for IRQs on this irqchip, pass IRQ_TYPE_NONE
|
|
* to have the core avoid setting up any default type in the hardware.
|
|
* @threaded: whether this irqchip uses a nested thread handler
|
|
* @lock_key: lockdep class for IRQ lock
|
|
* @request_key: lockdep class for IRQ request
|
|
*
|
|
* This function closely associates a certain irqchip with a certain
|
|
* gpiochip, providing an irq domain to translate the local IRQs to
|
|
* global irqs in the gpiolib core, and making sure that the gpiochip
|
|
* is passed as chip data to all related functions. Driver callbacks
|
|
* need to use gpiochip_get_data() to get their local state containers back
|
|
* from the gpiochip passed as chip data. An irqdomain will be stored
|
|
* in the gpiochip that shall be used by the driver to handle IRQ number
|
|
* translation. The gpiochip will need to be initialized and registered
|
|
* before calling this function.
|
|
*
|
|
* This function will handle two cell:ed simple IRQs and assumes all
|
|
* the pins on the gpiochip can generate a unique IRQ. Everything else
|
|
* need to be open coded.
|
|
*/
|
|
int gpiochip_irqchip_add_key(struct gpio_chip *gpiochip,
|
|
struct irq_chip *irqchip,
|
|
unsigned int first_irq,
|
|
irq_flow_handler_t handler,
|
|
unsigned int type,
|
|
bool threaded,
|
|
struct lock_class_key *lock_key,
|
|
struct lock_class_key *request_key)
|
|
{
|
|
struct device_node *of_node;
|
|
|
|
if (!gpiochip || !irqchip)
|
|
return -EINVAL;
|
|
|
|
if (!gpiochip->parent) {
|
|
pr_err("missing gpiochip .dev parent pointer\n");
|
|
return -EINVAL;
|
|
}
|
|
gpiochip->irq.threaded = threaded;
|
|
of_node = gpiochip->parent->of_node;
|
|
#ifdef CONFIG_OF_GPIO
|
|
/*
|
|
* If the gpiochip has an assigned OF node this takes precedence
|
|
* FIXME: get rid of this and use gpiochip->parent->of_node
|
|
* everywhere
|
|
*/
|
|
if (gpiochip->of_node)
|
|
of_node = gpiochip->of_node;
|
|
#endif
|
|
/*
|
|
* Specifying a default trigger is a terrible idea if DT or ACPI is
|
|
* used to configure the interrupts, as you may end-up with
|
|
* conflicting triggers. Tell the user, and reset to NONE.
|
|
*/
|
|
if (WARN(of_node && type != IRQ_TYPE_NONE,
|
|
"%pOF: Ignoring %d default trigger\n", of_node, type))
|
|
type = IRQ_TYPE_NONE;
|
|
if (has_acpi_companion(gpiochip->parent) && type != IRQ_TYPE_NONE) {
|
|
acpi_handle_warn(ACPI_HANDLE(gpiochip->parent),
|
|
"Ignoring %d default trigger\n", type);
|
|
type = IRQ_TYPE_NONE;
|
|
}
|
|
|
|
gpiochip->irq.chip = irqchip;
|
|
gpiochip->irq.handler = handler;
|
|
gpiochip->irq.default_type = type;
|
|
gpiochip->to_irq = gpiochip_to_irq;
|
|
gpiochip->irq.lock_key = lock_key;
|
|
gpiochip->irq.request_key = request_key;
|
|
gpiochip->irq.domain = irq_domain_add_simple(of_node,
|
|
gpiochip->ngpio, first_irq,
|
|
&gpiochip_domain_ops, gpiochip);
|
|
if (!gpiochip->irq.domain) {
|
|
gpiochip->irq.chip = NULL;
|
|
return -EINVAL;
|
|
}
|
|
|
|
gpiochip_set_irq_hooks(gpiochip);
|
|
|
|
acpi_gpiochip_request_interrupts(gpiochip);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_irqchip_add_key);
|
|
|
|
#else /* CONFIG_GPIOLIB_IRQCHIP */
|
|
|
|
static inline int gpiochip_add_irqchip(struct gpio_chip *gpiochip,
|
|
struct lock_class_key *lock_key,
|
|
struct lock_class_key *request_key)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip) {}
|
|
static inline int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gpiochip)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gpiochip)
|
|
{ }
|
|
|
|
#endif /* CONFIG_GPIOLIB_IRQCHIP */
|
|
|
|
/**
|
|
* gpiochip_generic_request() - request the gpio function for a pin
|
|
* @chip: the gpiochip owning the GPIO
|
|
* @offset: the offset of the GPIO to request for GPIO function
|
|
*/
|
|
int gpiochip_generic_request(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
return pinctrl_gpio_request(chip->gpiodev->base + offset);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_generic_request);
|
|
|
|
/**
|
|
* gpiochip_generic_free() - free the gpio function from a pin
|
|
* @chip: the gpiochip to request the gpio function for
|
|
* @offset: the offset of the GPIO to free from GPIO function
|
|
*/
|
|
void gpiochip_generic_free(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
pinctrl_gpio_free(chip->gpiodev->base + offset);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_generic_free);
|
|
|
|
/**
|
|
* gpiochip_generic_config() - apply configuration for a pin
|
|
* @chip: the gpiochip owning the GPIO
|
|
* @offset: the offset of the GPIO to apply the configuration
|
|
* @config: the configuration to be applied
|
|
*/
|
|
int gpiochip_generic_config(struct gpio_chip *chip, unsigned offset,
|
|
unsigned long config)
|
|
{
|
|
return pinctrl_gpio_set_config(chip->gpiodev->base + offset, config);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_generic_config);
|
|
|
|
#ifdef CONFIG_PINCTRL
|
|
|
|
/**
|
|
* gpiochip_add_pingroup_range() - add a range for GPIO <-> pin mapping
|
|
* @chip: the gpiochip to add the range for
|
|
* @pctldev: the pin controller to map to
|
|
* @gpio_offset: the start offset in the current gpio_chip number space
|
|
* @pin_group: name of the pin group inside the pin controller
|
|
*
|
|
* Calling this function directly from a DeviceTree-supported
|
|
* pinctrl driver is DEPRECATED. Please see Section 2.1 of
|
|
* Documentation/devicetree/bindings/gpio/gpio.txt on how to
|
|
* bind pinctrl and gpio drivers via the "gpio-ranges" property.
|
|
*/
|
|
int gpiochip_add_pingroup_range(struct gpio_chip *chip,
|
|
struct pinctrl_dev *pctldev,
|
|
unsigned int gpio_offset, const char *pin_group)
|
|
{
|
|
struct gpio_pin_range *pin_range;
|
|
struct gpio_device *gdev = chip->gpiodev;
|
|
int ret;
|
|
|
|
pin_range = kzalloc(sizeof(*pin_range), GFP_KERNEL);
|
|
if (!pin_range) {
|
|
chip_err(chip, "failed to allocate pin ranges\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Use local offset as range ID */
|
|
pin_range->range.id = gpio_offset;
|
|
pin_range->range.gc = chip;
|
|
pin_range->range.name = chip->label;
|
|
pin_range->range.base = gdev->base + gpio_offset;
|
|
pin_range->pctldev = pctldev;
|
|
|
|
ret = pinctrl_get_group_pins(pctldev, pin_group,
|
|
&pin_range->range.pins,
|
|
&pin_range->range.npins);
|
|
if (ret < 0) {
|
|
kfree(pin_range);
|
|
return ret;
|
|
}
|
|
|
|
pinctrl_add_gpio_range(pctldev, &pin_range->range);
|
|
|
|
chip_dbg(chip, "created GPIO range %d->%d ==> %s PINGRP %s\n",
|
|
gpio_offset, gpio_offset + pin_range->range.npins - 1,
|
|
pinctrl_dev_get_devname(pctldev), pin_group);
|
|
|
|
list_add_tail(&pin_range->node, &gdev->pin_ranges);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_add_pingroup_range);
|
|
|
|
/**
|
|
* gpiochip_add_pin_range() - add a range for GPIO <-> pin mapping
|
|
* @chip: the gpiochip to add the range for
|
|
* @pinctl_name: the dev_name() of the pin controller to map to
|
|
* @gpio_offset: the start offset in the current gpio_chip number space
|
|
* @pin_offset: the start offset in the pin controller number space
|
|
* @npins: the number of pins from the offset of each pin space (GPIO and
|
|
* pin controller) to accumulate in this range
|
|
*
|
|
* Returns:
|
|
* 0 on success, or a negative error-code on failure.
|
|
*
|
|
* Calling this function directly from a DeviceTree-supported
|
|
* pinctrl driver is DEPRECATED. Please see Section 2.1 of
|
|
* Documentation/devicetree/bindings/gpio/gpio.txt on how to
|
|
* bind pinctrl and gpio drivers via the "gpio-ranges" property.
|
|
*/
|
|
int gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
|
|
unsigned int gpio_offset, unsigned int pin_offset,
|
|
unsigned int npins)
|
|
{
|
|
struct gpio_pin_range *pin_range;
|
|
struct gpio_device *gdev = chip->gpiodev;
|
|
int ret;
|
|
|
|
pin_range = kzalloc(sizeof(*pin_range), GFP_KERNEL);
|
|
if (!pin_range) {
|
|
chip_err(chip, "failed to allocate pin ranges\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Use local offset as range ID */
|
|
pin_range->range.id = gpio_offset;
|
|
pin_range->range.gc = chip;
|
|
pin_range->range.name = chip->label;
|
|
pin_range->range.base = gdev->base + gpio_offset;
|
|
pin_range->range.pin_base = pin_offset;
|
|
pin_range->range.npins = npins;
|
|
pin_range->pctldev = pinctrl_find_and_add_gpio_range(pinctl_name,
|
|
&pin_range->range);
|
|
if (IS_ERR(pin_range->pctldev)) {
|
|
ret = PTR_ERR(pin_range->pctldev);
|
|
chip_err(chip, "could not create pin range\n");
|
|
kfree(pin_range);
|
|
return ret;
|
|
}
|
|
chip_dbg(chip, "created GPIO range %d->%d ==> %s PIN %d->%d\n",
|
|
gpio_offset, gpio_offset + npins - 1,
|
|
pinctl_name,
|
|
pin_offset, pin_offset + npins - 1);
|
|
|
|
list_add_tail(&pin_range->node, &gdev->pin_ranges);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_add_pin_range);
|
|
|
|
/**
|
|
* gpiochip_remove_pin_ranges() - remove all the GPIO <-> pin mappings
|
|
* @chip: the chip to remove all the mappings for
|
|
*/
|
|
void gpiochip_remove_pin_ranges(struct gpio_chip *chip)
|
|
{
|
|
struct gpio_pin_range *pin_range, *tmp;
|
|
struct gpio_device *gdev = chip->gpiodev;
|
|
|
|
list_for_each_entry_safe(pin_range, tmp, &gdev->pin_ranges, node) {
|
|
list_del(&pin_range->node);
|
|
pinctrl_remove_gpio_range(pin_range->pctldev,
|
|
&pin_range->range);
|
|
kfree(pin_range);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_remove_pin_ranges);
|
|
|
|
#endif /* CONFIG_PINCTRL */
|
|
|
|
/* These "optional" allocation calls help prevent drivers from stomping
|
|
* on each other, and help provide better diagnostics in debugfs.
|
|
* They're called even less than the "set direction" calls.
|
|
*/
|
|
static int gpiod_request_commit(struct gpio_desc *desc, const char *label)
|
|
{
|
|
struct gpio_chip *chip = desc->gdev->chip;
|
|
int status;
|
|
unsigned long flags;
|
|
unsigned offset;
|
|
|
|
if (label) {
|
|
label = kstrdup_const(label, GFP_KERNEL);
|
|
if (!label)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
spin_lock_irqsave(&gpio_lock, flags);
|
|
|
|
/* NOTE: gpio_request() can be called in early boot,
|
|
* before IRQs are enabled, for non-sleeping (SOC) GPIOs.
|
|
*/
|
|
|
|
if (test_and_set_bit(FLAG_REQUESTED, &desc->flags) == 0) {
|
|
desc_set_label(desc, label ? : "?");
|
|
status = 0;
|
|
} else {
|
|
kfree_const(label);
|
|
status = -EBUSY;
|
|
goto done;
|
|
}
|
|
|
|
if (chip->request) {
|
|
/* chip->request may sleep */
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
offset = gpio_chip_hwgpio(desc);
|
|
if (gpiochip_line_is_valid(chip, offset))
|
|
status = chip->request(chip, offset);
|
|
else
|
|
status = -EINVAL;
|
|
spin_lock_irqsave(&gpio_lock, flags);
|
|
|
|
if (status < 0) {
|
|
desc_set_label(desc, NULL);
|
|
kfree_const(label);
|
|
clear_bit(FLAG_REQUESTED, &desc->flags);
|
|
goto done;
|
|
}
|
|
}
|
|
if (chip->get_direction) {
|
|
/* chip->get_direction may sleep */
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
gpiod_get_direction(desc);
|
|
spin_lock_irqsave(&gpio_lock, flags);
|
|
}
|
|
done:
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* This descriptor validation needs to be inserted verbatim into each
|
|
* function taking a descriptor, so we need to use a preprocessor
|
|
* macro to avoid endless duplication. If the desc is NULL it is an
|
|
* optional GPIO and calls should just bail out.
|
|
*/
|
|
static int validate_desc(const struct gpio_desc *desc, const char *func)
|
|
{
|
|
if (!desc)
|
|
return 0;
|
|
if (IS_ERR(desc)) {
|
|
pr_warn("%s: invalid GPIO (errorpointer)\n", func);
|
|
return PTR_ERR(desc);
|
|
}
|
|
if (!desc->gdev) {
|
|
pr_warn("%s: invalid GPIO (no device)\n", func);
|
|
return -EINVAL;
|
|
}
|
|
if (!desc->gdev->chip) {
|
|
dev_warn(&desc->gdev->dev,
|
|
"%s: backing chip is gone\n", func);
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
#define VALIDATE_DESC(desc) do { \
|
|
int __valid = validate_desc(desc, __func__); \
|
|
if (__valid <= 0) \
|
|
return __valid; \
|
|
} while (0)
|
|
|
|
#define VALIDATE_DESC_VOID(desc) do { \
|
|
int __valid = validate_desc(desc, __func__); \
|
|
if (__valid <= 0) \
|
|
return; \
|
|
} while (0)
|
|
|
|
int gpiod_request(struct gpio_desc *desc, const char *label)
|
|
{
|
|
int status = -EPROBE_DEFER;
|
|
struct gpio_device *gdev;
|
|
|
|
VALIDATE_DESC(desc);
|
|
gdev = desc->gdev;
|
|
|
|
if (try_module_get(gdev->owner)) {
|
|
status = gpiod_request_commit(desc, label);
|
|
if (status < 0)
|
|
module_put(gdev->owner);
|
|
else
|
|
get_device(&gdev->dev);
|
|
}
|
|
|
|
if (status)
|
|
gpiod_dbg(desc, "%s: status %d\n", __func__, status);
|
|
|
|
return status;
|
|
}
|
|
|
|
static bool gpiod_free_commit(struct gpio_desc *desc)
|
|
{
|
|
bool ret = false;
|
|
unsigned long flags;
|
|
struct gpio_chip *chip;
|
|
|
|
might_sleep();
|
|
|
|
gpiod_unexport(desc);
|
|
|
|
spin_lock_irqsave(&gpio_lock, flags);
|
|
|
|
chip = desc->gdev->chip;
|
|
if (chip && test_bit(FLAG_REQUESTED, &desc->flags)) {
|
|
if (chip->free) {
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
might_sleep_if(chip->can_sleep);
|
|
chip->free(chip, gpio_chip_hwgpio(desc));
|
|
spin_lock_irqsave(&gpio_lock, flags);
|
|
}
|
|
kfree_const(desc->label);
|
|
desc_set_label(desc, NULL);
|
|
clear_bit(FLAG_ACTIVE_LOW, &desc->flags);
|
|
clear_bit(FLAG_REQUESTED, &desc->flags);
|
|
clear_bit(FLAG_OPEN_DRAIN, &desc->flags);
|
|
clear_bit(FLAG_OPEN_SOURCE, &desc->flags);
|
|
clear_bit(FLAG_IS_HOGGED, &desc->flags);
|
|
ret = true;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
void gpiod_free(struct gpio_desc *desc)
|
|
{
|
|
if (desc && desc->gdev && gpiod_free_commit(desc)) {
|
|
module_put(desc->gdev->owner);
|
|
put_device(&desc->gdev->dev);
|
|
} else {
|
|
WARN_ON(extra_checks);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* gpiochip_is_requested - return string iff signal was requested
|
|
* @chip: controller managing the signal
|
|
* @offset: of signal within controller's 0..(ngpio - 1) range
|
|
*
|
|
* Returns NULL if the GPIO is not currently requested, else a string.
|
|
* The string returned is the label passed to gpio_request(); if none has been
|
|
* passed it is a meaningless, non-NULL constant.
|
|
*
|
|
* This function is for use by GPIO controller drivers. The label can
|
|
* help with diagnostics, and knowing that the signal is used as a GPIO
|
|
* can help avoid accidentally multiplexing it to another controller.
|
|
*/
|
|
const char *gpiochip_is_requested(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct gpio_desc *desc;
|
|
|
|
if (offset >= chip->ngpio)
|
|
return NULL;
|
|
|
|
desc = &chip->gpiodev->descs[offset];
|
|
|
|
if (test_bit(FLAG_REQUESTED, &desc->flags) == 0)
|
|
return NULL;
|
|
return desc->label;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_is_requested);
|
|
|
|
/**
|
|
* gpiochip_request_own_desc - Allow GPIO chip to request its own descriptor
|
|
* @chip: GPIO chip
|
|
* @hwnum: hardware number of the GPIO for which to request the descriptor
|
|
* @label: label for the GPIO
|
|
* @flags: flags for this GPIO or 0 if default
|
|
*
|
|
* Function allows GPIO chip drivers to request and use their own GPIO
|
|
* descriptors via gpiolib API. Difference to gpiod_request() is that this
|
|
* function will not increase reference count of the GPIO chip module. This
|
|
* allows the GPIO chip module to be unloaded as needed (we assume that the
|
|
* GPIO chip driver handles freeing the GPIOs it has requested).
|
|
*
|
|
* Returns:
|
|
* A pointer to the GPIO descriptor, or an ERR_PTR()-encoded negative error
|
|
* code on failure.
|
|
*/
|
|
struct gpio_desc *gpiochip_request_own_desc(struct gpio_chip *chip, u16 hwnum,
|
|
const char *label,
|
|
enum gpiod_flags flags)
|
|
{
|
|
unsigned long lflags = GPIO_LOOKUP_FLAGS_DEFAULT;
|
|
struct gpio_desc *desc = gpiochip_get_desc(chip, hwnum);
|
|
int err;
|
|
|
|
if (IS_ERR(desc)) {
|
|
chip_err(chip, "failed to get GPIO descriptor\n");
|
|
return desc;
|
|
}
|
|
|
|
err = gpiod_request_commit(desc, label);
|
|
if (err < 0)
|
|
return ERR_PTR(err);
|
|
|
|
err = gpiod_configure_flags(desc, label, lflags, flags);
|
|
if (err) {
|
|
chip_err(chip, "setup of own GPIO %s failed\n", label);
|
|
gpiod_free_commit(desc);
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
return desc;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_request_own_desc);
|
|
|
|
/**
|
|
* gpiochip_free_own_desc - Free GPIO requested by the chip driver
|
|
* @desc: GPIO descriptor to free
|
|
*
|
|
* Function frees the given GPIO requested previously with
|
|
* gpiochip_request_own_desc().
|
|
*/
|
|
void gpiochip_free_own_desc(struct gpio_desc *desc)
|
|
{
|
|
if (desc)
|
|
gpiod_free_commit(desc);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_free_own_desc);
|
|
|
|
/*
|
|
* Drivers MUST set GPIO direction before making get/set calls. In
|
|
* some cases this is done in early boot, before IRQs are enabled.
|
|
*
|
|
* As a rule these aren't called more than once (except for drivers
|
|
* using the open-drain emulation idiom) so these are natural places
|
|
* to accumulate extra debugging checks. Note that we can't (yet)
|
|
* rely on gpio_request() having been called beforehand.
|
|
*/
|
|
|
|
static int gpio_set_config(struct gpio_chip *gc, unsigned offset,
|
|
enum pin_config_param mode)
|
|
{
|
|
unsigned long config;
|
|
unsigned arg;
|
|
|
|
switch (mode) {
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
arg = 1;
|
|
break;
|
|
|
|
default:
|
|
arg = 0;
|
|
}
|
|
|
|
config = PIN_CONF_PACKED(mode, arg);
|
|
return gc->set_config ? gc->set_config(gc, offset, config) : -ENOTSUPP;
|
|
}
|
|
|
|
/**
|
|
* gpiod_direction_input - set the GPIO direction to input
|
|
* @desc: GPIO to set to input
|
|
*
|
|
* Set the direction of the passed GPIO to input, such as gpiod_get_value() can
|
|
* be called safely on it.
|
|
*
|
|
* Return 0 in case of success, else an error code.
|
|
*/
|
|
int gpiod_direction_input(struct gpio_desc *desc)
|
|
{
|
|
struct gpio_chip *chip;
|
|
int status = 0;
|
|
|
|
VALIDATE_DESC(desc);
|
|
chip = desc->gdev->chip;
|
|
|
|
/*
|
|
* It is legal to have no .get() and .direction_input() specified if
|
|
* the chip is output-only, but you can't specify .direction_input()
|
|
* and not support the .get() operation, that doesn't make sense.
|
|
*/
|
|
if (!chip->get && chip->direction_input) {
|
|
gpiod_warn(desc,
|
|
"%s: missing get() but have direction_input()\n",
|
|
__func__);
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* If we have a .direction_input() callback, things are simple,
|
|
* just call it. Else we are some input-only chip so try to check the
|
|
* direction (if .get_direction() is supported) else we silently
|
|
* assume we are in input mode after this.
|
|
*/
|
|
if (chip->direction_input) {
|
|
status = chip->direction_input(chip, gpio_chip_hwgpio(desc));
|
|
} else if (chip->get_direction &&
|
|
(chip->get_direction(chip, gpio_chip_hwgpio(desc)) != 1)) {
|
|
gpiod_warn(desc,
|
|
"%s: missing direction_input() operation and line is output\n",
|
|
__func__);
|
|
return -EIO;
|
|
}
|
|
if (status == 0)
|
|
clear_bit(FLAG_IS_OUT, &desc->flags);
|
|
|
|
if (test_bit(FLAG_PULL_UP, &desc->flags))
|
|
gpio_set_config(chip, gpio_chip_hwgpio(desc),
|
|
PIN_CONFIG_BIAS_PULL_UP);
|
|
else if (test_bit(FLAG_PULL_DOWN, &desc->flags))
|
|
gpio_set_config(chip, gpio_chip_hwgpio(desc),
|
|
PIN_CONFIG_BIAS_PULL_DOWN);
|
|
|
|
trace_gpio_direction(desc_to_gpio(desc), 1, status);
|
|
|
|
return status;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_direction_input);
|
|
|
|
static int gpiod_direction_output_raw_commit(struct gpio_desc *desc, int value)
|
|
{
|
|
struct gpio_chip *gc = desc->gdev->chip;
|
|
int val = !!value;
|
|
int ret = 0;
|
|
|
|
/*
|
|
* It's OK not to specify .direction_output() if the gpiochip is
|
|
* output-only, but if there is then not even a .set() operation it
|
|
* is pretty tricky to drive the output line.
|
|
*/
|
|
if (!gc->set && !gc->direction_output) {
|
|
gpiod_warn(desc,
|
|
"%s: missing set() and direction_output() operations\n",
|
|
__func__);
|
|
return -EIO;
|
|
}
|
|
|
|
if (gc->direction_output) {
|
|
ret = gc->direction_output(gc, gpio_chip_hwgpio(desc), val);
|
|
} else {
|
|
/* Check that we are in output mode if we can */
|
|
if (gc->get_direction &&
|
|
gc->get_direction(gc, gpio_chip_hwgpio(desc))) {
|
|
gpiod_warn(desc,
|
|
"%s: missing direction_output() operation\n",
|
|
__func__);
|
|
return -EIO;
|
|
}
|
|
/*
|
|
* If we can't actively set the direction, we are some
|
|
* output-only chip, so just drive the output as desired.
|
|
*/
|
|
gc->set(gc, gpio_chip_hwgpio(desc), val);
|
|
}
|
|
|
|
if (!ret)
|
|
set_bit(FLAG_IS_OUT, &desc->flags);
|
|
trace_gpio_value(desc_to_gpio(desc), 0, val);
|
|
trace_gpio_direction(desc_to_gpio(desc), 0, ret);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* gpiod_direction_output_raw - set the GPIO direction to output
|
|
* @desc: GPIO to set to output
|
|
* @value: initial output value of the GPIO
|
|
*
|
|
* Set the direction of the passed GPIO to output, such as gpiod_set_value() can
|
|
* be called safely on it. The initial value of the output must be specified
|
|
* as raw value on the physical line without regard for the ACTIVE_LOW status.
|
|
*
|
|
* Return 0 in case of success, else an error code.
|
|
*/
|
|
int gpiod_direction_output_raw(struct gpio_desc *desc, int value)
|
|
{
|
|
VALIDATE_DESC(desc);
|
|
return gpiod_direction_output_raw_commit(desc, value);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_direction_output_raw);
|
|
|
|
/**
|
|
* gpiod_direction_output - set the GPIO direction to output
|
|
* @desc: GPIO to set to output
|
|
* @value: initial output value of the GPIO
|
|
*
|
|
* Set the direction of the passed GPIO to output, such as gpiod_set_value() can
|
|
* be called safely on it. The initial value of the output must be specified
|
|
* as the logical value of the GPIO, i.e. taking its ACTIVE_LOW status into
|
|
* account.
|
|
*
|
|
* Return 0 in case of success, else an error code.
|
|
*/
|
|
int gpiod_direction_output(struct gpio_desc *desc, int value)
|
|
{
|
|
struct gpio_chip *gc;
|
|
int ret;
|
|
|
|
VALIDATE_DESC(desc);
|
|
if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
|
|
value = !value;
|
|
else
|
|
value = !!value;
|
|
|
|
/* GPIOs used for enabled IRQs shall not be set as output */
|
|
if (test_bit(FLAG_USED_AS_IRQ, &desc->flags) &&
|
|
test_bit(FLAG_IRQ_IS_ENABLED, &desc->flags)) {
|
|
gpiod_err(desc,
|
|
"%s: tried to set a GPIO tied to an IRQ as output\n",
|
|
__func__);
|
|
return -EIO;
|
|
}
|
|
|
|
gc = desc->gdev->chip;
|
|
if (test_bit(FLAG_OPEN_DRAIN, &desc->flags)) {
|
|
/* First see if we can enable open drain in hardware */
|
|
ret = gpio_set_config(gc, gpio_chip_hwgpio(desc),
|
|
PIN_CONFIG_DRIVE_OPEN_DRAIN);
|
|
if (!ret)
|
|
goto set_output_value;
|
|
/* Emulate open drain by not actively driving the line high */
|
|
if (value)
|
|
return gpiod_direction_input(desc);
|
|
}
|
|
else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) {
|
|
ret = gpio_set_config(gc, gpio_chip_hwgpio(desc),
|
|
PIN_CONFIG_DRIVE_OPEN_SOURCE);
|
|
if (!ret)
|
|
goto set_output_value;
|
|
/* Emulate open source by not actively driving the line low */
|
|
if (!value)
|
|
return gpiod_direction_input(desc);
|
|
} else {
|
|
gpio_set_config(gc, gpio_chip_hwgpio(desc),
|
|
PIN_CONFIG_DRIVE_PUSH_PULL);
|
|
}
|
|
|
|
set_output_value:
|
|
return gpiod_direction_output_raw_commit(desc, value);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_direction_output);
|
|
|
|
/**
|
|
* gpiod_set_debounce - sets @debounce time for a GPIO
|
|
* @desc: descriptor of the GPIO for which to set debounce time
|
|
* @debounce: debounce time in microseconds
|
|
*
|
|
* Returns:
|
|
* 0 on success, %-ENOTSUPP if the controller doesn't support setting the
|
|
* debounce time.
|
|
*/
|
|
int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce)
|
|
{
|
|
struct gpio_chip *chip;
|
|
unsigned long config;
|
|
|
|
VALIDATE_DESC(desc);
|
|
chip = desc->gdev->chip;
|
|
if (!chip->set || !chip->set_config) {
|
|
gpiod_dbg(desc,
|
|
"%s: missing set() or set_config() operations\n",
|
|
__func__);
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
config = pinconf_to_config_packed(PIN_CONFIG_INPUT_DEBOUNCE, debounce);
|
|
return chip->set_config(chip, gpio_chip_hwgpio(desc), config);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_set_debounce);
|
|
|
|
/**
|
|
* gpiod_set_transitory - Lose or retain GPIO state on suspend or reset
|
|
* @desc: descriptor of the GPIO for which to configure persistence
|
|
* @transitory: True to lose state on suspend or reset, false for persistence
|
|
*
|
|
* Returns:
|
|
* 0 on success, otherwise a negative error code.
|
|
*/
|
|
int gpiod_set_transitory(struct gpio_desc *desc, bool transitory)
|
|
{
|
|
struct gpio_chip *chip;
|
|
unsigned long packed;
|
|
int gpio;
|
|
int rc;
|
|
|
|
VALIDATE_DESC(desc);
|
|
/*
|
|
* Handle FLAG_TRANSITORY first, enabling queries to gpiolib for
|
|
* persistence state.
|
|
*/
|
|
if (transitory)
|
|
set_bit(FLAG_TRANSITORY, &desc->flags);
|
|
else
|
|
clear_bit(FLAG_TRANSITORY, &desc->flags);
|
|
|
|
/* If the driver supports it, set the persistence state now */
|
|
chip = desc->gdev->chip;
|
|
if (!chip->set_config)
|
|
return 0;
|
|
|
|
packed = pinconf_to_config_packed(PIN_CONFIG_PERSIST_STATE,
|
|
!transitory);
|
|
gpio = gpio_chip_hwgpio(desc);
|
|
rc = chip->set_config(chip, gpio, packed);
|
|
if (rc == -ENOTSUPP) {
|
|
dev_dbg(&desc->gdev->dev, "Persistence not supported for GPIO %d\n",
|
|
gpio);
|
|
return 0;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_set_transitory);
|
|
|
|
/**
|
|
* gpiod_is_active_low - test whether a GPIO is active-low or not
|
|
* @desc: the gpio descriptor to test
|
|
*
|
|
* Returns 1 if the GPIO is active-low, 0 otherwise.
|
|
*/
|
|
int gpiod_is_active_low(const struct gpio_desc *desc)
|
|
{
|
|
VALIDATE_DESC(desc);
|
|
return test_bit(FLAG_ACTIVE_LOW, &desc->flags);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_is_active_low);
|
|
|
|
/* I/O calls are only valid after configuration completed; the relevant
|
|
* "is this a valid GPIO" error checks should already have been done.
|
|
*
|
|
* "Get" operations are often inlinable as reading a pin value register,
|
|
* and masking the relevant bit in that register.
|
|
*
|
|
* When "set" operations are inlinable, they involve writing that mask to
|
|
* one register to set a low value, or a different register to set it high.
|
|
* Otherwise locking is needed, so there may be little value to inlining.
|
|
*
|
|
*------------------------------------------------------------------------
|
|
*
|
|
* IMPORTANT!!! The hot paths -- get/set value -- assume that callers
|
|
* have requested the GPIO. That can include implicit requesting by
|
|
* a direction setting call. Marking a gpio as requested locks its chip
|
|
* in memory, guaranteeing that these table lookups need no more locking
|
|
* and that gpiochip_remove() will fail.
|
|
*
|
|
* REVISIT when debugging, consider adding some instrumentation to ensure
|
|
* that the GPIO was actually requested.
|
|
*/
|
|
|
|
static int gpiod_get_raw_value_commit(const struct gpio_desc *desc)
|
|
{
|
|
struct gpio_chip *chip;
|
|
int offset;
|
|
int value;
|
|
|
|
chip = desc->gdev->chip;
|
|
offset = gpio_chip_hwgpio(desc);
|
|
value = chip->get ? chip->get(chip, offset) : -EIO;
|
|
value = value < 0 ? value : !!value;
|
|
trace_gpio_value(desc_to_gpio(desc), 1, value);
|
|
return value;
|
|
}
|
|
|
|
static int gpio_chip_get_multiple(struct gpio_chip *chip,
|
|
unsigned long *mask, unsigned long *bits)
|
|
{
|
|
if (chip->get_multiple) {
|
|
return chip->get_multiple(chip, mask, bits);
|
|
} else if (chip->get) {
|
|
int i, value;
|
|
|
|
for_each_set_bit(i, mask, chip->ngpio) {
|
|
value = chip->get(chip, i);
|
|
if (value < 0)
|
|
return value;
|
|
__assign_bit(i, bits, value);
|
|
}
|
|
return 0;
|
|
}
|
|
return -EIO;
|
|
}
|
|
|
|
int gpiod_get_array_value_complex(bool raw, bool can_sleep,
|
|
unsigned int array_size,
|
|
struct gpio_desc **desc_array,
|
|
struct gpio_array *array_info,
|
|
unsigned long *value_bitmap)
|
|
{
|
|
int err, i = 0;
|
|
|
|
/*
|
|
* Validate array_info against desc_array and its size.
|
|
* It should immediately follow desc_array if both
|
|
* have been obtained from the same gpiod_get_array() call.
|
|
*/
|
|
if (array_info && array_info->desc == desc_array &&
|
|
array_size <= array_info->size &&
|
|
(void *)array_info == desc_array + array_info->size) {
|
|
if (!can_sleep)
|
|
WARN_ON(array_info->chip->can_sleep);
|
|
|
|
err = gpio_chip_get_multiple(array_info->chip,
|
|
array_info->get_mask,
|
|
value_bitmap);
|
|
if (err)
|
|
return err;
|
|
|
|
if (!raw && !bitmap_empty(array_info->invert_mask, array_size))
|
|
bitmap_xor(value_bitmap, value_bitmap,
|
|
array_info->invert_mask, array_size);
|
|
|
|
if (bitmap_full(array_info->get_mask, array_size))
|
|
return 0;
|
|
|
|
i = find_first_zero_bit(array_info->get_mask, array_size);
|
|
} else {
|
|
array_info = NULL;
|
|
}
|
|
|
|
while (i < array_size) {
|
|
struct gpio_chip *chip = desc_array[i]->gdev->chip;
|
|
unsigned long fastpath[2 * BITS_TO_LONGS(FASTPATH_NGPIO)];
|
|
unsigned long *mask, *bits;
|
|
int first, j, ret;
|
|
|
|
if (likely(chip->ngpio <= FASTPATH_NGPIO)) {
|
|
mask = fastpath;
|
|
} else {
|
|
mask = kmalloc_array(2 * BITS_TO_LONGS(chip->ngpio),
|
|
sizeof(*mask),
|
|
can_sleep ? GFP_KERNEL : GFP_ATOMIC);
|
|
if (!mask)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
bits = mask + BITS_TO_LONGS(chip->ngpio);
|
|
bitmap_zero(mask, chip->ngpio);
|
|
|
|
if (!can_sleep)
|
|
WARN_ON(chip->can_sleep);
|
|
|
|
/* collect all inputs belonging to the same chip */
|
|
first = i;
|
|
do {
|
|
const struct gpio_desc *desc = desc_array[i];
|
|
int hwgpio = gpio_chip_hwgpio(desc);
|
|
|
|
__set_bit(hwgpio, mask);
|
|
i++;
|
|
|
|
if (array_info)
|
|
i = find_next_zero_bit(array_info->get_mask,
|
|
array_size, i);
|
|
} while ((i < array_size) &&
|
|
(desc_array[i]->gdev->chip == chip));
|
|
|
|
ret = gpio_chip_get_multiple(chip, mask, bits);
|
|
if (ret) {
|
|
if (mask != fastpath)
|
|
kfree(mask);
|
|
return ret;
|
|
}
|
|
|
|
for (j = first; j < i; ) {
|
|
const struct gpio_desc *desc = desc_array[j];
|
|
int hwgpio = gpio_chip_hwgpio(desc);
|
|
int value = test_bit(hwgpio, bits);
|
|
|
|
if (!raw && test_bit(FLAG_ACTIVE_LOW, &desc->flags))
|
|
value = !value;
|
|
__assign_bit(j, value_bitmap, value);
|
|
trace_gpio_value(desc_to_gpio(desc), 1, value);
|
|
j++;
|
|
|
|
if (array_info)
|
|
j = find_next_zero_bit(array_info->get_mask, i,
|
|
j);
|
|
}
|
|
|
|
if (mask != fastpath)
|
|
kfree(mask);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* gpiod_get_raw_value() - return a gpio's raw value
|
|
* @desc: gpio whose value will be returned
|
|
*
|
|
* Return the GPIO's raw value, i.e. the value of the physical line disregarding
|
|
* its ACTIVE_LOW status, or negative errno on failure.
|
|
*
|
|
* This function should be called from contexts where we cannot sleep, and will
|
|
* complain if the GPIO chip functions potentially sleep.
|
|
*/
|
|
int gpiod_get_raw_value(const struct gpio_desc *desc)
|
|
{
|
|
VALIDATE_DESC(desc);
|
|
/* Should be using gpio_get_value_cansleep() */
|
|
WARN_ON(desc->gdev->chip->can_sleep);
|
|
return gpiod_get_raw_value_commit(desc);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_get_raw_value);
|
|
|
|
/**
|
|
* gpiod_get_value() - return a gpio's value
|
|
* @desc: gpio whose value will be returned
|
|
*
|
|
* Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
|
|
* account, or negative errno on failure.
|
|
*
|
|
* This function should be called from contexts where we cannot sleep, and will
|
|
* complain if the GPIO chip functions potentially sleep.
|
|
*/
|
|
int gpiod_get_value(const struct gpio_desc *desc)
|
|
{
|
|
int value;
|
|
|
|
VALIDATE_DESC(desc);
|
|
/* Should be using gpio_get_value_cansleep() */
|
|
WARN_ON(desc->gdev->chip->can_sleep);
|
|
|
|
value = gpiod_get_raw_value_commit(desc);
|
|
if (value < 0)
|
|
return value;
|
|
|
|
if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
|
|
value = !value;
|
|
|
|
return value;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_get_value);
|
|
|
|
/**
|
|
* gpiod_get_raw_array_value() - read raw values from an array of GPIOs
|
|
* @array_size: number of elements in the descriptor array / value bitmap
|
|
* @desc_array: array of GPIO descriptors whose values will be read
|
|
* @array_info: information on applicability of fast bitmap processing path
|
|
* @value_bitmap: bitmap to store the read values
|
|
*
|
|
* Read the raw values of the GPIOs, i.e. the values of the physical lines
|
|
* without regard for their ACTIVE_LOW status. Return 0 in case of success,
|
|
* else an error code.
|
|
*
|
|
* This function should be called from contexts where we cannot sleep,
|
|
* and it will complain if the GPIO chip functions potentially sleep.
|
|
*/
|
|
int gpiod_get_raw_array_value(unsigned int array_size,
|
|
struct gpio_desc **desc_array,
|
|
struct gpio_array *array_info,
|
|
unsigned long *value_bitmap)
|
|
{
|
|
if (!desc_array)
|
|
return -EINVAL;
|
|
return gpiod_get_array_value_complex(true, false, array_size,
|
|
desc_array, array_info,
|
|
value_bitmap);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_get_raw_array_value);
|
|
|
|
/**
|
|
* gpiod_get_array_value() - read values from an array of GPIOs
|
|
* @array_size: number of elements in the descriptor array / value bitmap
|
|
* @desc_array: array of GPIO descriptors whose values will be read
|
|
* @array_info: information on applicability of fast bitmap processing path
|
|
* @value_bitmap: bitmap to store the read values
|
|
*
|
|
* Read the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
|
|
* into account. Return 0 in case of success, else an error code.
|
|
*
|
|
* This function should be called from contexts where we cannot sleep,
|
|
* and it will complain if the GPIO chip functions potentially sleep.
|
|
*/
|
|
int gpiod_get_array_value(unsigned int array_size,
|
|
struct gpio_desc **desc_array,
|
|
struct gpio_array *array_info,
|
|
unsigned long *value_bitmap)
|
|
{
|
|
if (!desc_array)
|
|
return -EINVAL;
|
|
return gpiod_get_array_value_complex(false, false, array_size,
|
|
desc_array, array_info,
|
|
value_bitmap);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_get_array_value);
|
|
|
|
/*
|
|
* gpio_set_open_drain_value_commit() - Set the open drain gpio's value.
|
|
* @desc: gpio descriptor whose state need to be set.
|
|
* @value: Non-zero for setting it HIGH otherwise it will set to LOW.
|
|
*/
|
|
static void gpio_set_open_drain_value_commit(struct gpio_desc *desc, bool value)
|
|
{
|
|
int err = 0;
|
|
struct gpio_chip *chip = desc->gdev->chip;
|
|
int offset = gpio_chip_hwgpio(desc);
|
|
|
|
if (value) {
|
|
err = chip->direction_input(chip, offset);
|
|
if (!err)
|
|
clear_bit(FLAG_IS_OUT, &desc->flags);
|
|
} else {
|
|
err = chip->direction_output(chip, offset, 0);
|
|
if (!err)
|
|
set_bit(FLAG_IS_OUT, &desc->flags);
|
|
}
|
|
trace_gpio_direction(desc_to_gpio(desc), value, err);
|
|
if (err < 0)
|
|
gpiod_err(desc,
|
|
"%s: Error in set_value for open drain err %d\n",
|
|
__func__, err);
|
|
}
|
|
|
|
/*
|
|
* _gpio_set_open_source_value() - Set the open source gpio's value.
|
|
* @desc: gpio descriptor whose state need to be set.
|
|
* @value: Non-zero for setting it HIGH otherwise it will set to LOW.
|
|
*/
|
|
static void gpio_set_open_source_value_commit(struct gpio_desc *desc, bool value)
|
|
{
|
|
int err = 0;
|
|
struct gpio_chip *chip = desc->gdev->chip;
|
|
int offset = gpio_chip_hwgpio(desc);
|
|
|
|
if (value) {
|
|
err = chip->direction_output(chip, offset, 1);
|
|
if (!err)
|
|
set_bit(FLAG_IS_OUT, &desc->flags);
|
|
} else {
|
|
err = chip->direction_input(chip, offset);
|
|
if (!err)
|
|
clear_bit(FLAG_IS_OUT, &desc->flags);
|
|
}
|
|
trace_gpio_direction(desc_to_gpio(desc), !value, err);
|
|
if (err < 0)
|
|
gpiod_err(desc,
|
|
"%s: Error in set_value for open source err %d\n",
|
|
__func__, err);
|
|
}
|
|
|
|
static void gpiod_set_raw_value_commit(struct gpio_desc *desc, bool value)
|
|
{
|
|
struct gpio_chip *chip;
|
|
|
|
chip = desc->gdev->chip;
|
|
trace_gpio_value(desc_to_gpio(desc), 0, value);
|
|
chip->set(chip, gpio_chip_hwgpio(desc), value);
|
|
}
|
|
|
|
/*
|
|
* set multiple outputs on the same chip;
|
|
* use the chip's set_multiple function if available;
|
|
* otherwise set the outputs sequentially;
|
|
* @mask: bit mask array; one bit per output; BITS_PER_LONG bits per word
|
|
* defines which outputs are to be changed
|
|
* @bits: bit value array; one bit per output; BITS_PER_LONG bits per word
|
|
* defines the values the outputs specified by mask are to be set to
|
|
*/
|
|
static void gpio_chip_set_multiple(struct gpio_chip *chip,
|
|
unsigned long *mask, unsigned long *bits)
|
|
{
|
|
if (chip->set_multiple) {
|
|
chip->set_multiple(chip, mask, bits);
|
|
} else {
|
|
unsigned int i;
|
|
|
|
/* set outputs if the corresponding mask bit is set */
|
|
for_each_set_bit(i, mask, chip->ngpio)
|
|
chip->set(chip, i, test_bit(i, bits));
|
|
}
|
|
}
|
|
|
|
int gpiod_set_array_value_complex(bool raw, bool can_sleep,
|
|
unsigned int array_size,
|
|
struct gpio_desc **desc_array,
|
|
struct gpio_array *array_info,
|
|
unsigned long *value_bitmap)
|
|
{
|
|
int i = 0;
|
|
|
|
/*
|
|
* Validate array_info against desc_array and its size.
|
|
* It should immediately follow desc_array if both
|
|
* have been obtained from the same gpiod_get_array() call.
|
|
*/
|
|
if (array_info && array_info->desc == desc_array &&
|
|
array_size <= array_info->size &&
|
|
(void *)array_info == desc_array + array_info->size) {
|
|
if (!can_sleep)
|
|
WARN_ON(array_info->chip->can_sleep);
|
|
|
|
if (!raw && !bitmap_empty(array_info->invert_mask, array_size))
|
|
bitmap_xor(value_bitmap, value_bitmap,
|
|
array_info->invert_mask, array_size);
|
|
|
|
gpio_chip_set_multiple(array_info->chip, array_info->set_mask,
|
|
value_bitmap);
|
|
|
|
if (bitmap_full(array_info->set_mask, array_size))
|
|
return 0;
|
|
|
|
i = find_first_zero_bit(array_info->set_mask, array_size);
|
|
} else {
|
|
array_info = NULL;
|
|
}
|
|
|
|
while (i < array_size) {
|
|
struct gpio_chip *chip = desc_array[i]->gdev->chip;
|
|
unsigned long fastpath[2 * BITS_TO_LONGS(FASTPATH_NGPIO)];
|
|
unsigned long *mask, *bits;
|
|
int count = 0;
|
|
|
|
if (likely(chip->ngpio <= FASTPATH_NGPIO)) {
|
|
mask = fastpath;
|
|
} else {
|
|
mask = kmalloc_array(2 * BITS_TO_LONGS(chip->ngpio),
|
|
sizeof(*mask),
|
|
can_sleep ? GFP_KERNEL : GFP_ATOMIC);
|
|
if (!mask)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
bits = mask + BITS_TO_LONGS(chip->ngpio);
|
|
bitmap_zero(mask, chip->ngpio);
|
|
|
|
if (!can_sleep)
|
|
WARN_ON(chip->can_sleep);
|
|
|
|
do {
|
|
struct gpio_desc *desc = desc_array[i];
|
|
int hwgpio = gpio_chip_hwgpio(desc);
|
|
int value = test_bit(i, value_bitmap);
|
|
|
|
/*
|
|
* Pins applicable for fast input but not for
|
|
* fast output processing may have been already
|
|
* inverted inside the fast path, skip them.
|
|
*/
|
|
if (!raw && !(array_info &&
|
|
test_bit(i, array_info->invert_mask)) &&
|
|
test_bit(FLAG_ACTIVE_LOW, &desc->flags))
|
|
value = !value;
|
|
trace_gpio_value(desc_to_gpio(desc), 0, value);
|
|
/*
|
|
* collect all normal outputs belonging to the same chip
|
|
* open drain and open source outputs are set individually
|
|
*/
|
|
if (test_bit(FLAG_OPEN_DRAIN, &desc->flags) && !raw) {
|
|
gpio_set_open_drain_value_commit(desc, value);
|
|
} else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags) && !raw) {
|
|
gpio_set_open_source_value_commit(desc, value);
|
|
} else {
|
|
__set_bit(hwgpio, mask);
|
|
if (value)
|
|
__set_bit(hwgpio, bits);
|
|
else
|
|
__clear_bit(hwgpio, bits);
|
|
count++;
|
|
}
|
|
i++;
|
|
|
|
if (array_info)
|
|
i = find_next_zero_bit(array_info->set_mask,
|
|
array_size, i);
|
|
} while ((i < array_size) &&
|
|
(desc_array[i]->gdev->chip == chip));
|
|
/* push collected bits to outputs */
|
|
if (count != 0)
|
|
gpio_chip_set_multiple(chip, mask, bits);
|
|
|
|
if (mask != fastpath)
|
|
kfree(mask);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* gpiod_set_raw_value() - assign a gpio's raw value
|
|
* @desc: gpio whose value will be assigned
|
|
* @value: value to assign
|
|
*
|
|
* Set the raw value of the GPIO, i.e. the value of its physical line without
|
|
* regard for its ACTIVE_LOW status.
|
|
*
|
|
* This function should be called from contexts where we cannot sleep, and will
|
|
* complain if the GPIO chip functions potentially sleep.
|
|
*/
|
|
void gpiod_set_raw_value(struct gpio_desc *desc, int value)
|
|
{
|
|
VALIDATE_DESC_VOID(desc);
|
|
/* Should be using gpiod_set_value_cansleep() */
|
|
WARN_ON(desc->gdev->chip->can_sleep);
|
|
gpiod_set_raw_value_commit(desc, value);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_set_raw_value);
|
|
|
|
/**
|
|
* gpiod_set_value_nocheck() - set a GPIO line value without checking
|
|
* @desc: the descriptor to set the value on
|
|
* @value: value to set
|
|
*
|
|
* This sets the value of a GPIO line backing a descriptor, applying
|
|
* different semantic quirks like active low and open drain/source
|
|
* handling.
|
|
*/
|
|
static void gpiod_set_value_nocheck(struct gpio_desc *desc, int value)
|
|
{
|
|
if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
|
|
value = !value;
|
|
if (test_bit(FLAG_OPEN_DRAIN, &desc->flags))
|
|
gpio_set_open_drain_value_commit(desc, value);
|
|
else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags))
|
|
gpio_set_open_source_value_commit(desc, value);
|
|
else
|
|
gpiod_set_raw_value_commit(desc, value);
|
|
}
|
|
|
|
/**
|
|
* gpiod_set_value() - assign a gpio's value
|
|
* @desc: gpio whose value will be assigned
|
|
* @value: value to assign
|
|
*
|
|
* Set the logical value of the GPIO, i.e. taking its ACTIVE_LOW,
|
|
* OPEN_DRAIN and OPEN_SOURCE flags into account.
|
|
*
|
|
* This function should be called from contexts where we cannot sleep, and will
|
|
* complain if the GPIO chip functions potentially sleep.
|
|
*/
|
|
void gpiod_set_value(struct gpio_desc *desc, int value)
|
|
{
|
|
VALIDATE_DESC_VOID(desc);
|
|
WARN_ON(desc->gdev->chip->can_sleep);
|
|
gpiod_set_value_nocheck(desc, value);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_set_value);
|
|
|
|
/**
|
|
* gpiod_set_raw_array_value() - assign values to an array of GPIOs
|
|
* @array_size: number of elements in the descriptor array / value bitmap
|
|
* @desc_array: array of GPIO descriptors whose values will be assigned
|
|
* @array_info: information on applicability of fast bitmap processing path
|
|
* @value_bitmap: bitmap of values to assign
|
|
*
|
|
* Set the raw values of the GPIOs, i.e. the values of the physical lines
|
|
* without regard for their ACTIVE_LOW status.
|
|
*
|
|
* This function should be called from contexts where we cannot sleep, and will
|
|
* complain if the GPIO chip functions potentially sleep.
|
|
*/
|
|
int gpiod_set_raw_array_value(unsigned int array_size,
|
|
struct gpio_desc **desc_array,
|
|
struct gpio_array *array_info,
|
|
unsigned long *value_bitmap)
|
|
{
|
|
if (!desc_array)
|
|
return -EINVAL;
|
|
return gpiod_set_array_value_complex(true, false, array_size,
|
|
desc_array, array_info, value_bitmap);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_set_raw_array_value);
|
|
|
|
/**
|
|
* gpiod_set_array_value() - assign values to an array of GPIOs
|
|
* @array_size: number of elements in the descriptor array / value bitmap
|
|
* @desc_array: array of GPIO descriptors whose values will be assigned
|
|
* @array_info: information on applicability of fast bitmap processing path
|
|
* @value_bitmap: bitmap of values to assign
|
|
*
|
|
* Set the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
|
|
* into account.
|
|
*
|
|
* This function should be called from contexts where we cannot sleep, and will
|
|
* complain if the GPIO chip functions potentially sleep.
|
|
*/
|
|
int gpiod_set_array_value(unsigned int array_size,
|
|
struct gpio_desc **desc_array,
|
|
struct gpio_array *array_info,
|
|
unsigned long *value_bitmap)
|
|
{
|
|
if (!desc_array)
|
|
return -EINVAL;
|
|
return gpiod_set_array_value_complex(false, false, array_size,
|
|
desc_array, array_info,
|
|
value_bitmap);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_set_array_value);
|
|
|
|
/**
|
|
* gpiod_cansleep() - report whether gpio value access may sleep
|
|
* @desc: gpio to check
|
|
*
|
|
*/
|
|
int gpiod_cansleep(const struct gpio_desc *desc)
|
|
{
|
|
VALIDATE_DESC(desc);
|
|
return desc->gdev->chip->can_sleep;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_cansleep);
|
|
|
|
/**
|
|
* gpiod_set_consumer_name() - set the consumer name for the descriptor
|
|
* @desc: gpio to set the consumer name on
|
|
* @name: the new consumer name
|
|
*/
|
|
int gpiod_set_consumer_name(struct gpio_desc *desc, const char *name)
|
|
{
|
|
VALIDATE_DESC(desc);
|
|
if (name) {
|
|
name = kstrdup_const(name, GFP_KERNEL);
|
|
if (!name)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
kfree_const(desc->label);
|
|
desc_set_label(desc, name);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_set_consumer_name);
|
|
|
|
/**
|
|
* gpiod_to_irq() - return the IRQ corresponding to a GPIO
|
|
* @desc: gpio whose IRQ will be returned (already requested)
|
|
*
|
|
* Return the IRQ corresponding to the passed GPIO, or an error code in case of
|
|
* error.
|
|
*/
|
|
int gpiod_to_irq(const struct gpio_desc *desc)
|
|
{
|
|
struct gpio_chip *chip;
|
|
int offset;
|
|
|
|
/*
|
|
* Cannot VALIDATE_DESC() here as gpiod_to_irq() consumer semantics
|
|
* requires this function to not return zero on an invalid descriptor
|
|
* but rather a negative error number.
|
|
*/
|
|
if (!desc || IS_ERR(desc) || !desc->gdev || !desc->gdev->chip)
|
|
return -EINVAL;
|
|
|
|
chip = desc->gdev->chip;
|
|
offset = gpio_chip_hwgpio(desc);
|
|
if (chip->to_irq) {
|
|
int retirq = chip->to_irq(chip, offset);
|
|
|
|
/* Zero means NO_IRQ */
|
|
if (!retirq)
|
|
return -ENXIO;
|
|
|
|
return retirq;
|
|
}
|
|
return -ENXIO;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_to_irq);
|
|
|
|
/**
|
|
* gpiochip_lock_as_irq() - lock a GPIO to be used as IRQ
|
|
* @chip: the chip the GPIO to lock belongs to
|
|
* @offset: the offset of the GPIO to lock as IRQ
|
|
*
|
|
* This is used directly by GPIO drivers that want to lock down
|
|
* a certain GPIO line to be used for IRQs.
|
|
*/
|
|
int gpiochip_lock_as_irq(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct gpio_desc *desc;
|
|
|
|
desc = gpiochip_get_desc(chip, offset);
|
|
if (IS_ERR(desc))
|
|
return PTR_ERR(desc);
|
|
|
|
/*
|
|
* If it's fast: flush the direction setting if something changed
|
|
* behind our back
|
|
*/
|
|
if (!chip->can_sleep && chip->get_direction) {
|
|
int dir = gpiod_get_direction(desc);
|
|
|
|
if (dir < 0) {
|
|
chip_err(chip, "%s: cannot get GPIO direction\n",
|
|
__func__);
|
|
return dir;
|
|
}
|
|
}
|
|
|
|
if (test_bit(FLAG_IS_OUT, &desc->flags)) {
|
|
chip_err(chip,
|
|
"%s: tried to flag a GPIO set as output for IRQ\n",
|
|
__func__);
|
|
return -EIO;
|
|
}
|
|
|
|
set_bit(FLAG_USED_AS_IRQ, &desc->flags);
|
|
set_bit(FLAG_IRQ_IS_ENABLED, &desc->flags);
|
|
|
|
/*
|
|
* If the consumer has not set up a label (such as when the
|
|
* IRQ is referenced from .to_irq()) we set up a label here
|
|
* so it is clear this is used as an interrupt.
|
|
*/
|
|
if (!desc->label)
|
|
desc_set_label(desc, "interrupt");
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_lock_as_irq);
|
|
|
|
/**
|
|
* gpiochip_unlock_as_irq() - unlock a GPIO used as IRQ
|
|
* @chip: the chip the GPIO to lock belongs to
|
|
* @offset: the offset of the GPIO to lock as IRQ
|
|
*
|
|
* This is used directly by GPIO drivers that want to indicate
|
|
* that a certain GPIO is no longer used exclusively for IRQ.
|
|
*/
|
|
void gpiochip_unlock_as_irq(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct gpio_desc *desc;
|
|
|
|
desc = gpiochip_get_desc(chip, offset);
|
|
if (IS_ERR(desc))
|
|
return;
|
|
|
|
clear_bit(FLAG_USED_AS_IRQ, &desc->flags);
|
|
clear_bit(FLAG_IRQ_IS_ENABLED, &desc->flags);
|
|
|
|
/* If we only had this marking, erase it */
|
|
if (desc->label && !strcmp(desc->label, "interrupt"))
|
|
desc_set_label(desc, NULL);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_unlock_as_irq);
|
|
|
|
void gpiochip_disable_irq(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct gpio_desc *desc = gpiochip_get_desc(chip, offset);
|
|
|
|
if (!IS_ERR(desc) &&
|
|
!WARN_ON(!test_bit(FLAG_USED_AS_IRQ, &desc->flags)))
|
|
clear_bit(FLAG_IRQ_IS_ENABLED, &desc->flags);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_disable_irq);
|
|
|
|
void gpiochip_enable_irq(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct gpio_desc *desc = gpiochip_get_desc(chip, offset);
|
|
|
|
if (!IS_ERR(desc) &&
|
|
!WARN_ON(!test_bit(FLAG_USED_AS_IRQ, &desc->flags))) {
|
|
WARN_ON(test_bit(FLAG_IS_OUT, &desc->flags));
|
|
set_bit(FLAG_IRQ_IS_ENABLED, &desc->flags);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_enable_irq);
|
|
|
|
bool gpiochip_line_is_irq(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
if (offset >= chip->ngpio)
|
|
return false;
|
|
|
|
return test_bit(FLAG_USED_AS_IRQ, &chip->gpiodev->descs[offset].flags);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_line_is_irq);
|
|
|
|
int gpiochip_reqres_irq(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
int ret;
|
|
|
|
if (!try_module_get(chip->gpiodev->owner))
|
|
return -ENODEV;
|
|
|
|
ret = gpiochip_lock_as_irq(chip, offset);
|
|
if (ret) {
|
|
chip_err(chip, "unable to lock HW IRQ %u for IRQ\n", offset);
|
|
module_put(chip->gpiodev->owner);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_reqres_irq);
|
|
|
|
void gpiochip_relres_irq(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
gpiochip_unlock_as_irq(chip, offset);
|
|
module_put(chip->gpiodev->owner);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_relres_irq);
|
|
|
|
bool gpiochip_line_is_open_drain(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
if (offset >= chip->ngpio)
|
|
return false;
|
|
|
|
return test_bit(FLAG_OPEN_DRAIN, &chip->gpiodev->descs[offset].flags);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_line_is_open_drain);
|
|
|
|
bool gpiochip_line_is_open_source(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
if (offset >= chip->ngpio)
|
|
return false;
|
|
|
|
return test_bit(FLAG_OPEN_SOURCE, &chip->gpiodev->descs[offset].flags);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_line_is_open_source);
|
|
|
|
bool gpiochip_line_is_persistent(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
if (offset >= chip->ngpio)
|
|
return false;
|
|
|
|
return !test_bit(FLAG_TRANSITORY, &chip->gpiodev->descs[offset].flags);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiochip_line_is_persistent);
|
|
|
|
/**
|
|
* gpiod_get_raw_value_cansleep() - return a gpio's raw value
|
|
* @desc: gpio whose value will be returned
|
|
*
|
|
* Return the GPIO's raw value, i.e. the value of the physical line disregarding
|
|
* its ACTIVE_LOW status, or negative errno on failure.
|
|
*
|
|
* This function is to be called from contexts that can sleep.
|
|
*/
|
|
int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc)
|
|
{
|
|
might_sleep_if(extra_checks);
|
|
VALIDATE_DESC(desc);
|
|
return gpiod_get_raw_value_commit(desc);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_get_raw_value_cansleep);
|
|
|
|
/**
|
|
* gpiod_get_value_cansleep() - return a gpio's value
|
|
* @desc: gpio whose value will be returned
|
|
*
|
|
* Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
|
|
* account, or negative errno on failure.
|
|
*
|
|
* This function is to be called from contexts that can sleep.
|
|
*/
|
|
int gpiod_get_value_cansleep(const struct gpio_desc *desc)
|
|
{
|
|
int value;
|
|
|
|
might_sleep_if(extra_checks);
|
|
VALIDATE_DESC(desc);
|
|
value = gpiod_get_raw_value_commit(desc);
|
|
if (value < 0)
|
|
return value;
|
|
|
|
if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
|
|
value = !value;
|
|
|
|
return value;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_get_value_cansleep);
|
|
|
|
/**
|
|
* gpiod_get_raw_array_value_cansleep() - read raw values from an array of GPIOs
|
|
* @array_size: number of elements in the descriptor array / value bitmap
|
|
* @desc_array: array of GPIO descriptors whose values will be read
|
|
* @array_info: information on applicability of fast bitmap processing path
|
|
* @value_bitmap: bitmap to store the read values
|
|
*
|
|
* Read the raw values of the GPIOs, i.e. the values of the physical lines
|
|
* without regard for their ACTIVE_LOW status. Return 0 in case of success,
|
|
* else an error code.
|
|
*
|
|
* This function is to be called from contexts that can sleep.
|
|
*/
|
|
int gpiod_get_raw_array_value_cansleep(unsigned int array_size,
|
|
struct gpio_desc **desc_array,
|
|
struct gpio_array *array_info,
|
|
unsigned long *value_bitmap)
|
|
{
|
|
might_sleep_if(extra_checks);
|
|
if (!desc_array)
|
|
return -EINVAL;
|
|
return gpiod_get_array_value_complex(true, true, array_size,
|
|
desc_array, array_info,
|
|
value_bitmap);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_get_raw_array_value_cansleep);
|
|
|
|
/**
|
|
* gpiod_get_array_value_cansleep() - read values from an array of GPIOs
|
|
* @array_size: number of elements in the descriptor array / value bitmap
|
|
* @desc_array: array of GPIO descriptors whose values will be read
|
|
* @array_info: information on applicability of fast bitmap processing path
|
|
* @value_bitmap: bitmap to store the read values
|
|
*
|
|
* Read the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
|
|
* into account. Return 0 in case of success, else an error code.
|
|
*
|
|
* This function is to be called from contexts that can sleep.
|
|
*/
|
|
int gpiod_get_array_value_cansleep(unsigned int array_size,
|
|
struct gpio_desc **desc_array,
|
|
struct gpio_array *array_info,
|
|
unsigned long *value_bitmap)
|
|
{
|
|
might_sleep_if(extra_checks);
|
|
if (!desc_array)
|
|
return -EINVAL;
|
|
return gpiod_get_array_value_complex(false, true, array_size,
|
|
desc_array, array_info,
|
|
value_bitmap);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_get_array_value_cansleep);
|
|
|
|
/**
|
|
* gpiod_set_raw_value_cansleep() - assign a gpio's raw value
|
|
* @desc: gpio whose value will be assigned
|
|
* @value: value to assign
|
|
*
|
|
* Set the raw value of the GPIO, i.e. the value of its physical line without
|
|
* regard for its ACTIVE_LOW status.
|
|
*
|
|
* This function is to be called from contexts that can sleep.
|
|
*/
|
|
void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value)
|
|
{
|
|
might_sleep_if(extra_checks);
|
|
VALIDATE_DESC_VOID(desc);
|
|
gpiod_set_raw_value_commit(desc, value);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_set_raw_value_cansleep);
|
|
|
|
/**
|
|
* gpiod_set_value_cansleep() - assign a gpio's value
|
|
* @desc: gpio whose value will be assigned
|
|
* @value: value to assign
|
|
*
|
|
* Set the logical value of the GPIO, i.e. taking its ACTIVE_LOW status into
|
|
* account
|
|
*
|
|
* This function is to be called from contexts that can sleep.
|
|
*/
|
|
void gpiod_set_value_cansleep(struct gpio_desc *desc, int value)
|
|
{
|
|
might_sleep_if(extra_checks);
|
|
VALIDATE_DESC_VOID(desc);
|
|
gpiod_set_value_nocheck(desc, value);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_set_value_cansleep);
|
|
|
|
/**
|
|
* gpiod_set_raw_array_value_cansleep() - assign values to an array of GPIOs
|
|
* @array_size: number of elements in the descriptor array / value bitmap
|
|
* @desc_array: array of GPIO descriptors whose values will be assigned
|
|
* @array_info: information on applicability of fast bitmap processing path
|
|
* @value_bitmap: bitmap of values to assign
|
|
*
|
|
* Set the raw values of the GPIOs, i.e. the values of the physical lines
|
|
* without regard for their ACTIVE_LOW status.
|
|
*
|
|
* This function is to be called from contexts that can sleep.
|
|
*/
|
|
int gpiod_set_raw_array_value_cansleep(unsigned int array_size,
|
|
struct gpio_desc **desc_array,
|
|
struct gpio_array *array_info,
|
|
unsigned long *value_bitmap)
|
|
{
|
|
might_sleep_if(extra_checks);
|
|
if (!desc_array)
|
|
return -EINVAL;
|
|
return gpiod_set_array_value_complex(true, true, array_size, desc_array,
|
|
array_info, value_bitmap);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_set_raw_array_value_cansleep);
|
|
|
|
/**
|
|
* gpiod_add_lookup_tables() - register GPIO device consumers
|
|
* @tables: list of tables of consumers to register
|
|
* @n: number of tables in the list
|
|
*/
|
|
void gpiod_add_lookup_tables(struct gpiod_lookup_table **tables, size_t n)
|
|
{
|
|
unsigned int i;
|
|
|
|
mutex_lock(&gpio_lookup_lock);
|
|
|
|
for (i = 0; i < n; i++)
|
|
list_add_tail(&tables[i]->list, &gpio_lookup_list);
|
|
|
|
mutex_unlock(&gpio_lookup_lock);
|
|
}
|
|
|
|
/**
|
|
* gpiod_set_array_value_cansleep() - assign values to an array of GPIOs
|
|
* @array_size: number of elements in the descriptor array / value bitmap
|
|
* @desc_array: array of GPIO descriptors whose values will be assigned
|
|
* @array_info: information on applicability of fast bitmap processing path
|
|
* @value_bitmap: bitmap of values to assign
|
|
*
|
|
* Set the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
|
|
* into account.
|
|
*
|
|
* This function is to be called from contexts that can sleep.
|
|
*/
|
|
int gpiod_set_array_value_cansleep(unsigned int array_size,
|
|
struct gpio_desc **desc_array,
|
|
struct gpio_array *array_info,
|
|
unsigned long *value_bitmap)
|
|
{
|
|
might_sleep_if(extra_checks);
|
|
if (!desc_array)
|
|
return -EINVAL;
|
|
return gpiod_set_array_value_complex(false, true, array_size,
|
|
desc_array, array_info,
|
|
value_bitmap);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_set_array_value_cansleep);
|
|
|
|
/**
|
|
* gpiod_add_lookup_table() - register GPIO device consumers
|
|
* @table: table of consumers to register
|
|
*/
|
|
void gpiod_add_lookup_table(struct gpiod_lookup_table *table)
|
|
{
|
|
mutex_lock(&gpio_lookup_lock);
|
|
|
|
list_add_tail(&table->list, &gpio_lookup_list);
|
|
|
|
mutex_unlock(&gpio_lookup_lock);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_add_lookup_table);
|
|
|
|
/**
|
|
* gpiod_remove_lookup_table() - unregister GPIO device consumers
|
|
* @table: table of consumers to unregister
|
|
*/
|
|
void gpiod_remove_lookup_table(struct gpiod_lookup_table *table)
|
|
{
|
|
mutex_lock(&gpio_lookup_lock);
|
|
|
|
list_del(&table->list);
|
|
|
|
mutex_unlock(&gpio_lookup_lock);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_remove_lookup_table);
|
|
|
|
/**
|
|
* gpiod_add_hogs() - register a set of GPIO hogs from machine code
|
|
* @hogs: table of gpio hog entries with a zeroed sentinel at the end
|
|
*/
|
|
void gpiod_add_hogs(struct gpiod_hog *hogs)
|
|
{
|
|
struct gpio_chip *chip;
|
|
struct gpiod_hog *hog;
|
|
|
|
mutex_lock(&gpio_machine_hogs_mutex);
|
|
|
|
for (hog = &hogs[0]; hog->chip_label; hog++) {
|
|
list_add_tail(&hog->list, &gpio_machine_hogs);
|
|
|
|
/*
|
|
* The chip may have been registered earlier, so check if it
|
|
* exists and, if so, try to hog the line now.
|
|
*/
|
|
chip = find_chip_by_name(hog->chip_label);
|
|
if (chip)
|
|
gpiochip_machine_hog(chip, hog);
|
|
}
|
|
|
|
mutex_unlock(&gpio_machine_hogs_mutex);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_add_hogs);
|
|
|
|
static struct gpiod_lookup_table *gpiod_find_lookup_table(struct device *dev)
|
|
{
|
|
const char *dev_id = dev ? dev_name(dev) : NULL;
|
|
struct gpiod_lookup_table *table;
|
|
|
|
mutex_lock(&gpio_lookup_lock);
|
|
|
|
list_for_each_entry(table, &gpio_lookup_list, list) {
|
|
if (table->dev_id && dev_id) {
|
|
/*
|
|
* Valid strings on both ends, must be identical to have
|
|
* a match
|
|
*/
|
|
if (!strcmp(table->dev_id, dev_id))
|
|
goto found;
|
|
} else {
|
|
/*
|
|
* One of the pointers is NULL, so both must be to have
|
|
* a match
|
|
*/
|
|
if (dev_id == table->dev_id)
|
|
goto found;
|
|
}
|
|
}
|
|
table = NULL;
|
|
|
|
found:
|
|
mutex_unlock(&gpio_lookup_lock);
|
|
return table;
|
|
}
|
|
|
|
static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id,
|
|
unsigned int idx, unsigned long *flags)
|
|
{
|
|
struct gpio_desc *desc = ERR_PTR(-ENOENT);
|
|
struct gpiod_lookup_table *table;
|
|
struct gpiod_lookup *p;
|
|
|
|
table = gpiod_find_lookup_table(dev);
|
|
if (!table)
|
|
return desc;
|
|
|
|
for (p = &table->table[0]; p->chip_label; p++) {
|
|
struct gpio_chip *chip;
|
|
|
|
/* idx must always match exactly */
|
|
if (p->idx != idx)
|
|
continue;
|
|
|
|
/* If the lookup entry has a con_id, require exact match */
|
|
if (p->con_id && (!con_id || strcmp(p->con_id, con_id)))
|
|
continue;
|
|
|
|
chip = find_chip_by_name(p->chip_label);
|
|
|
|
if (!chip) {
|
|
/*
|
|
* As the lookup table indicates a chip with
|
|
* p->chip_label should exist, assume it may
|
|
* still appear later and let the interested
|
|
* consumer be probed again or let the Deferred
|
|
* Probe infrastructure handle the error.
|
|
*/
|
|
dev_warn(dev, "cannot find GPIO chip %s, deferring\n",
|
|
p->chip_label);
|
|
return ERR_PTR(-EPROBE_DEFER);
|
|
}
|
|
|
|
if (chip->ngpio <= p->chip_hwnum) {
|
|
dev_err(dev,
|
|
"requested GPIO %d is out of range [0..%d] for chip %s\n",
|
|
idx, chip->ngpio, chip->label);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
desc = gpiochip_get_desc(chip, p->chip_hwnum);
|
|
*flags = p->flags;
|
|
|
|
return desc;
|
|
}
|
|
|
|
return desc;
|
|
}
|
|
|
|
static int dt_gpio_count(struct device *dev, const char *con_id)
|
|
{
|
|
int ret;
|
|
char propname[32];
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
|
|
if (con_id)
|
|
snprintf(propname, sizeof(propname), "%s-%s",
|
|
con_id, gpio_suffixes[i]);
|
|
else
|
|
snprintf(propname, sizeof(propname), "%s",
|
|
gpio_suffixes[i]);
|
|
|
|
ret = of_gpio_named_count(dev->of_node, propname);
|
|
if (ret > 0)
|
|
break;
|
|
}
|
|
return ret ? ret : -ENOENT;
|
|
}
|
|
|
|
static int platform_gpio_count(struct device *dev, const char *con_id)
|
|
{
|
|
struct gpiod_lookup_table *table;
|
|
struct gpiod_lookup *p;
|
|
unsigned int count = 0;
|
|
|
|
table = gpiod_find_lookup_table(dev);
|
|
if (!table)
|
|
return -ENOENT;
|
|
|
|
for (p = &table->table[0]; p->chip_label; p++) {
|
|
if ((con_id && p->con_id && !strcmp(con_id, p->con_id)) ||
|
|
(!con_id && !p->con_id))
|
|
count++;
|
|
}
|
|
if (!count)
|
|
return -ENOENT;
|
|
|
|
return count;
|
|
}
|
|
|
|
/**
|
|
* gpiod_count - return the number of GPIOs associated with a device / function
|
|
* or -ENOENT if no GPIO has been assigned to the requested function
|
|
* @dev: GPIO consumer, can be NULL for system-global GPIOs
|
|
* @con_id: function within the GPIO consumer
|
|
*/
|
|
int gpiod_count(struct device *dev, const char *con_id)
|
|
{
|
|
int count = -ENOENT;
|
|
|
|
if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node)
|
|
count = dt_gpio_count(dev, con_id);
|
|
else if (IS_ENABLED(CONFIG_ACPI) && dev && ACPI_HANDLE(dev))
|
|
count = acpi_gpio_count(dev, con_id);
|
|
|
|
if (count < 0)
|
|
count = platform_gpio_count(dev, con_id);
|
|
|
|
return count;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_count);
|
|
|
|
/**
|
|
* gpiod_get - obtain a GPIO for a given GPIO function
|
|
* @dev: GPIO consumer, can be NULL for system-global GPIOs
|
|
* @con_id: function within the GPIO consumer
|
|
* @flags: optional GPIO initialization flags
|
|
*
|
|
* Return the GPIO descriptor corresponding to the function con_id of device
|
|
* dev, -ENOENT if no GPIO has been assigned to the requested function, or
|
|
* another IS_ERR() code if an error occurred while trying to acquire the GPIO.
|
|
*/
|
|
struct gpio_desc *__must_check gpiod_get(struct device *dev, const char *con_id,
|
|
enum gpiod_flags flags)
|
|
{
|
|
return gpiod_get_index(dev, con_id, 0, flags);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_get);
|
|
|
|
/**
|
|
* gpiod_get_optional - obtain an optional GPIO for a given GPIO function
|
|
* @dev: GPIO consumer, can be NULL for system-global GPIOs
|
|
* @con_id: function within the GPIO consumer
|
|
* @flags: optional GPIO initialization flags
|
|
*
|
|
* This is equivalent to gpiod_get(), except that when no GPIO was assigned to
|
|
* the requested function it will return NULL. This is convenient for drivers
|
|
* that need to handle optional GPIOs.
|
|
*/
|
|
struct gpio_desc *__must_check gpiod_get_optional(struct device *dev,
|
|
const char *con_id,
|
|
enum gpiod_flags flags)
|
|
{
|
|
return gpiod_get_index_optional(dev, con_id, 0, flags);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_get_optional);
|
|
|
|
|
|
/**
|
|
* gpiod_configure_flags - helper function to configure a given GPIO
|
|
* @desc: gpio whose value will be assigned
|
|
* @con_id: function within the GPIO consumer
|
|
* @lflags: bitmask of gpio_lookup_flags GPIO_* values - returned from
|
|
* of_find_gpio() or of_get_gpio_hog()
|
|
* @dflags: gpiod_flags - optional GPIO initialization flags
|
|
*
|
|
* Return 0 on success, -ENOENT if no GPIO has been assigned to the
|
|
* requested function and/or index, or another IS_ERR() code if an error
|
|
* occurred while trying to acquire the GPIO.
|
|
*/
|
|
int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id,
|
|
unsigned long lflags, enum gpiod_flags dflags)
|
|
{
|
|
int status;
|
|
|
|
if (lflags & GPIO_ACTIVE_LOW)
|
|
set_bit(FLAG_ACTIVE_LOW, &desc->flags);
|
|
|
|
if (lflags & GPIO_OPEN_DRAIN)
|
|
set_bit(FLAG_OPEN_DRAIN, &desc->flags);
|
|
else if (dflags & GPIOD_FLAGS_BIT_OPEN_DRAIN) {
|
|
/*
|
|
* This enforces open drain mode from the consumer side.
|
|
* This is necessary for some busses like I2C, but the lookup
|
|
* should *REALLY* have specified them as open drain in the
|
|
* first place, so print a little warning here.
|
|
*/
|
|
set_bit(FLAG_OPEN_DRAIN, &desc->flags);
|
|
gpiod_warn(desc,
|
|
"enforced open drain please flag it properly in DT/ACPI DSDT/board file\n");
|
|
}
|
|
|
|
if (lflags & GPIO_OPEN_SOURCE)
|
|
set_bit(FLAG_OPEN_SOURCE, &desc->flags);
|
|
|
|
if ((lflags & GPIO_PULL_UP) && (lflags & GPIO_PULL_DOWN)) {
|
|
gpiod_err(desc,
|
|
"both pull-up and pull-down enabled, invalid configuration\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (lflags & GPIO_PULL_UP)
|
|
set_bit(FLAG_PULL_UP, &desc->flags);
|
|
else if (lflags & GPIO_PULL_DOWN)
|
|
set_bit(FLAG_PULL_DOWN, &desc->flags);
|
|
|
|
status = gpiod_set_transitory(desc, (lflags & GPIO_TRANSITORY));
|
|
if (status < 0)
|
|
return status;
|
|
|
|
/* No particular flag request, return here... */
|
|
if (!(dflags & GPIOD_FLAGS_BIT_DIR_SET)) {
|
|
pr_debug("no flags found for %s\n", con_id);
|
|
return 0;
|
|
}
|
|
|
|
/* Process flags */
|
|
if (dflags & GPIOD_FLAGS_BIT_DIR_OUT)
|
|
status = gpiod_direction_output(desc,
|
|
!!(dflags & GPIOD_FLAGS_BIT_DIR_VAL));
|
|
else
|
|
status = gpiod_direction_input(desc);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* gpiod_get_index - obtain a GPIO from a multi-index GPIO function
|
|
* @dev: GPIO consumer, can be NULL for system-global GPIOs
|
|
* @con_id: function within the GPIO consumer
|
|
* @idx: index of the GPIO to obtain in the consumer
|
|
* @flags: optional GPIO initialization flags
|
|
*
|
|
* This variant of gpiod_get() allows to access GPIOs other than the first
|
|
* defined one for functions that define several GPIOs.
|
|
*
|
|
* Return a valid GPIO descriptor, -ENOENT if no GPIO has been assigned to the
|
|
* requested function and/or index, or another IS_ERR() code if an error
|
|
* occurred while trying to acquire the GPIO.
|
|
*/
|
|
struct gpio_desc *__must_check gpiod_get_index(struct device *dev,
|
|
const char *con_id,
|
|
unsigned int idx,
|
|
enum gpiod_flags flags)
|
|
{
|
|
unsigned long lookupflags = GPIO_LOOKUP_FLAGS_DEFAULT;
|
|
struct gpio_desc *desc = NULL;
|
|
int status;
|
|
/* Maybe we have a device name, maybe not */
|
|
const char *devname = dev ? dev_name(dev) : "?";
|
|
|
|
dev_dbg(dev, "GPIO lookup for consumer %s\n", con_id);
|
|
|
|
if (dev) {
|
|
/* Using device tree? */
|
|
if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
|
|
dev_dbg(dev, "using device tree for GPIO lookup\n");
|
|
desc = of_find_gpio(dev, con_id, idx, &lookupflags);
|
|
} else if (ACPI_COMPANION(dev)) {
|
|
dev_dbg(dev, "using ACPI for GPIO lookup\n");
|
|
desc = acpi_find_gpio(dev, con_id, idx, &flags, &lookupflags);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Either we are not using DT or ACPI, or their lookup did not return
|
|
* a result. In that case, use platform lookup as a fallback.
|
|
*/
|
|
if (!desc || desc == ERR_PTR(-ENOENT)) {
|
|
dev_dbg(dev, "using lookup tables for GPIO lookup\n");
|
|
desc = gpiod_find(dev, con_id, idx, &lookupflags);
|
|
}
|
|
|
|
if (IS_ERR(desc)) {
|
|
dev_dbg(dev, "No GPIO consumer %s found\n", con_id);
|
|
return desc;
|
|
}
|
|
|
|
/*
|
|
* If a connection label was passed use that, else attempt to use
|
|
* the device name as label
|
|
*/
|
|
status = gpiod_request(desc, con_id ? con_id : devname);
|
|
if (status < 0) {
|
|
if (status == -EBUSY && flags & GPIOD_FLAGS_BIT_NONEXCLUSIVE) {
|
|
/*
|
|
* This happens when there are several consumers for
|
|
* the same GPIO line: we just return here without
|
|
* further initialization. It is a bit if a hack.
|
|
* This is necessary to support fixed regulators.
|
|
*
|
|
* FIXME: Make this more sane and safe.
|
|
*/
|
|
dev_info(dev, "nonexclusive access to GPIO for %s\n",
|
|
con_id ? con_id : devname);
|
|
return desc;
|
|
} else {
|
|
return ERR_PTR(status);
|
|
}
|
|
}
|
|
|
|
status = gpiod_configure_flags(desc, con_id, lookupflags, flags);
|
|
if (status < 0) {
|
|
dev_dbg(dev, "setup of GPIO %s failed\n", con_id);
|
|
gpiod_put(desc);
|
|
return ERR_PTR(status);
|
|
}
|
|
|
|
return desc;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_get_index);
|
|
|
|
/**
|
|
* gpiod_get_from_of_node() - obtain a GPIO from an OF node
|
|
* @node: handle of the OF node
|
|
* @propname: name of the DT property representing the GPIO
|
|
* @index: index of the GPIO to obtain for the consumer
|
|
* @dflags: GPIO initialization flags
|
|
* @label: label to attach to the requested GPIO
|
|
*
|
|
* Returns:
|
|
* On successful request the GPIO pin is configured in accordance with
|
|
* provided @dflags. If the node does not have the requested GPIO
|
|
* property, NULL is returned.
|
|
*
|
|
* In case of error an ERR_PTR() is returned.
|
|
*/
|
|
struct gpio_desc *gpiod_get_from_of_node(struct device_node *node,
|
|
const char *propname, int index,
|
|
enum gpiod_flags dflags,
|
|
const char *label)
|
|
{
|
|
unsigned long lflags = GPIO_LOOKUP_FLAGS_DEFAULT;
|
|
struct gpio_desc *desc;
|
|
enum of_gpio_flags flags;
|
|
bool active_low = false;
|
|
bool single_ended = false;
|
|
bool open_drain = false;
|
|
bool transitory = false;
|
|
int ret;
|
|
|
|
desc = of_get_named_gpiod_flags(node, propname,
|
|
index, &flags);
|
|
|
|
if (!desc || IS_ERR(desc)) {
|
|
/* If it is not there, just return NULL */
|
|
if (PTR_ERR(desc) == -ENOENT)
|
|
return NULL;
|
|
return desc;
|
|
}
|
|
|
|
active_low = flags & OF_GPIO_ACTIVE_LOW;
|
|
single_ended = flags & OF_GPIO_SINGLE_ENDED;
|
|
open_drain = flags & OF_GPIO_OPEN_DRAIN;
|
|
transitory = flags & OF_GPIO_TRANSITORY;
|
|
|
|
ret = gpiod_request(desc, label);
|
|
if (ret == -EBUSY && (flags & GPIOD_FLAGS_BIT_NONEXCLUSIVE))
|
|
return desc;
|
|
if (ret)
|
|
return ERR_PTR(ret);
|
|
|
|
if (active_low)
|
|
lflags |= GPIO_ACTIVE_LOW;
|
|
|
|
if (single_ended) {
|
|
if (open_drain)
|
|
lflags |= GPIO_OPEN_DRAIN;
|
|
else
|
|
lflags |= GPIO_OPEN_SOURCE;
|
|
}
|
|
|
|
if (transitory)
|
|
lflags |= GPIO_TRANSITORY;
|
|
|
|
ret = gpiod_configure_flags(desc, propname, lflags, dflags);
|
|
if (ret < 0) {
|
|
gpiod_put(desc);
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
return desc;
|
|
}
|
|
EXPORT_SYMBOL(gpiod_get_from_of_node);
|
|
|
|
/**
|
|
* fwnode_get_named_gpiod - obtain a GPIO from firmware node
|
|
* @fwnode: handle of the firmware node
|
|
* @propname: name of the firmware property representing the GPIO
|
|
* @index: index of the GPIO to obtain for the consumer
|
|
* @dflags: GPIO initialization flags
|
|
* @label: label to attach to the requested GPIO
|
|
*
|
|
* This function can be used for drivers that get their configuration
|
|
* from opaque firmware.
|
|
*
|
|
* The function properly finds the corresponding GPIO using whatever is the
|
|
* underlying firmware interface and then makes sure that the GPIO
|
|
* descriptor is requested before it is returned to the caller.
|
|
*
|
|
* Returns:
|
|
* On successful request the GPIO pin is configured in accordance with
|
|
* provided @dflags.
|
|
*
|
|
* In case of error an ERR_PTR() is returned.
|
|
*/
|
|
struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode,
|
|
const char *propname, int index,
|
|
enum gpiod_flags dflags,
|
|
const char *label)
|
|
{
|
|
unsigned long lflags = GPIO_LOOKUP_FLAGS_DEFAULT;
|
|
struct gpio_desc *desc = ERR_PTR(-ENODEV);
|
|
int ret;
|
|
|
|
if (!fwnode)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
if (is_of_node(fwnode)) {
|
|
desc = gpiod_get_from_of_node(to_of_node(fwnode),
|
|
propname, index,
|
|
dflags,
|
|
label);
|
|
return desc;
|
|
} else if (is_acpi_node(fwnode)) {
|
|
struct acpi_gpio_info info;
|
|
|
|
desc = acpi_node_get_gpiod(fwnode, propname, index, &info);
|
|
if (IS_ERR(desc))
|
|
return desc;
|
|
|
|
acpi_gpio_update_gpiod_flags(&dflags, &info);
|
|
acpi_gpio_update_gpiod_lookup_flags(&lflags, &info);
|
|
}
|
|
|
|
/* Currently only ACPI takes this path */
|
|
ret = gpiod_request(desc, label);
|
|
if (ret)
|
|
return ERR_PTR(ret);
|
|
|
|
ret = gpiod_configure_flags(desc, propname, lflags, dflags);
|
|
if (ret < 0) {
|
|
gpiod_put(desc);
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
return desc;
|
|
}
|
|
EXPORT_SYMBOL_GPL(fwnode_get_named_gpiod);
|
|
|
|
/**
|
|
* gpiod_get_index_optional - obtain an optional GPIO from a multi-index GPIO
|
|
* function
|
|
* @dev: GPIO consumer, can be NULL for system-global GPIOs
|
|
* @con_id: function within the GPIO consumer
|
|
* @index: index of the GPIO to obtain in the consumer
|
|
* @flags: optional GPIO initialization flags
|
|
*
|
|
* This is equivalent to gpiod_get_index(), except that when no GPIO with the
|
|
* specified index was assigned to the requested function it will return NULL.
|
|
* This is convenient for drivers that need to handle optional GPIOs.
|
|
*/
|
|
struct gpio_desc *__must_check gpiod_get_index_optional(struct device *dev,
|
|
const char *con_id,
|
|
unsigned int index,
|
|
enum gpiod_flags flags)
|
|
{
|
|
struct gpio_desc *desc;
|
|
|
|
desc = gpiod_get_index(dev, con_id, index, flags);
|
|
if (IS_ERR(desc)) {
|
|
if (PTR_ERR(desc) == -ENOENT)
|
|
return NULL;
|
|
}
|
|
|
|
return desc;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_get_index_optional);
|
|
|
|
/**
|
|
* gpiod_hog - Hog the specified GPIO desc given the provided flags
|
|
* @desc: gpio whose value will be assigned
|
|
* @name: gpio line name
|
|
* @lflags: bitmask of gpio_lookup_flags GPIO_* values - returned from
|
|
* of_find_gpio() or of_get_gpio_hog()
|
|
* @dflags: gpiod_flags - optional GPIO initialization flags
|
|
*/
|
|
int gpiod_hog(struct gpio_desc *desc, const char *name,
|
|
unsigned long lflags, enum gpiod_flags dflags)
|
|
{
|
|
struct gpio_chip *chip;
|
|
struct gpio_desc *local_desc;
|
|
int hwnum;
|
|
int status;
|
|
|
|
chip = gpiod_to_chip(desc);
|
|
hwnum = gpio_chip_hwgpio(desc);
|
|
|
|
/*
|
|
* FIXME: not very elegant that we call gpiod_configure_flags()
|
|
* twice here (once inside gpiochip_request_own_desc() and
|
|
* again here), but the gpiochip_request_own_desc() is external
|
|
* and cannot really pass the lflags so this is the lesser evil
|
|
* at the moment. Pass zero as dflags on this first call so we
|
|
* don't screw anything up.
|
|
*/
|
|
local_desc = gpiochip_request_own_desc(chip, hwnum, name, 0);
|
|
if (IS_ERR(local_desc)) {
|
|
status = PTR_ERR(local_desc);
|
|
pr_err("requesting hog GPIO %s (chip %s, offset %d) failed, %d\n",
|
|
name, chip->label, hwnum, status);
|
|
return status;
|
|
}
|
|
|
|
status = gpiod_configure_flags(desc, name, lflags, dflags);
|
|
if (status < 0) {
|
|
pr_err("setup of hog GPIO %s (chip %s, offset %d) failed, %d\n",
|
|
name, chip->label, hwnum, status);
|
|
gpiochip_free_own_desc(desc);
|
|
return status;
|
|
}
|
|
|
|
/* Mark GPIO as hogged so it can be identified and removed later */
|
|
set_bit(FLAG_IS_HOGGED, &desc->flags);
|
|
|
|
pr_info("GPIO line %d (%s) hogged as %s%s\n",
|
|
desc_to_gpio(desc), name,
|
|
(dflags&GPIOD_FLAGS_BIT_DIR_OUT) ? "output" : "input",
|
|
(dflags&GPIOD_FLAGS_BIT_DIR_OUT) ?
|
|
(dflags&GPIOD_FLAGS_BIT_DIR_VAL) ? "/high" : "/low":"");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* gpiochip_free_hogs - Scan gpio-controller chip and release GPIO hog
|
|
* @chip: gpio chip to act on
|
|
*/
|
|
static void gpiochip_free_hogs(struct gpio_chip *chip)
|
|
{
|
|
int id;
|
|
|
|
for (id = 0; id < chip->ngpio; id++) {
|
|
if (test_bit(FLAG_IS_HOGGED, &chip->gpiodev->descs[id].flags))
|
|
gpiochip_free_own_desc(&chip->gpiodev->descs[id]);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* gpiod_get_array - obtain multiple GPIOs from a multi-index GPIO function
|
|
* @dev: GPIO consumer, can be NULL for system-global GPIOs
|
|
* @con_id: function within the GPIO consumer
|
|
* @flags: optional GPIO initialization flags
|
|
*
|
|
* This function acquires all the GPIOs defined under a given function.
|
|
*
|
|
* Return a struct gpio_descs containing an array of descriptors, -ENOENT if
|
|
* no GPIO has been assigned to the requested function, or another IS_ERR()
|
|
* code if an error occurred while trying to acquire the GPIOs.
|
|
*/
|
|
struct gpio_descs *__must_check gpiod_get_array(struct device *dev,
|
|
const char *con_id,
|
|
enum gpiod_flags flags)
|
|
{
|
|
struct gpio_desc *desc;
|
|
struct gpio_descs *descs;
|
|
struct gpio_array *array_info = NULL;
|
|
struct gpio_chip *chip;
|
|
int count, bitmap_size;
|
|
|
|
count = gpiod_count(dev, con_id);
|
|
if (count < 0)
|
|
return ERR_PTR(count);
|
|
|
|
descs = kzalloc(struct_size(descs, desc, count), GFP_KERNEL);
|
|
if (!descs)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
for (descs->ndescs = 0; descs->ndescs < count; ) {
|
|
desc = gpiod_get_index(dev, con_id, descs->ndescs, flags);
|
|
if (IS_ERR(desc)) {
|
|
gpiod_put_array(descs);
|
|
return ERR_CAST(desc);
|
|
}
|
|
|
|
descs->desc[descs->ndescs] = desc;
|
|
|
|
chip = gpiod_to_chip(desc);
|
|
/*
|
|
* If pin hardware number of array member 0 is also 0, select
|
|
* its chip as a candidate for fast bitmap processing path.
|
|
*/
|
|
if (descs->ndescs == 0 && gpio_chip_hwgpio(desc) == 0) {
|
|
struct gpio_descs *array;
|
|
|
|
bitmap_size = BITS_TO_LONGS(chip->ngpio > count ?
|
|
chip->ngpio : count);
|
|
|
|
array = kzalloc(struct_size(descs, desc, count) +
|
|
struct_size(array_info, invert_mask,
|
|
3 * bitmap_size), GFP_KERNEL);
|
|
if (!array) {
|
|
gpiod_put_array(descs);
|
|
return ERR_PTR(-ENOMEM);
|
|
}
|
|
|
|
memcpy(array, descs,
|
|
struct_size(descs, desc, descs->ndescs + 1));
|
|
kfree(descs);
|
|
|
|
descs = array;
|
|
array_info = (void *)(descs->desc + count);
|
|
array_info->get_mask = array_info->invert_mask +
|
|
bitmap_size;
|
|
array_info->set_mask = array_info->get_mask +
|
|
bitmap_size;
|
|
|
|
array_info->desc = descs->desc;
|
|
array_info->size = count;
|
|
array_info->chip = chip;
|
|
bitmap_set(array_info->get_mask, descs->ndescs,
|
|
count - descs->ndescs);
|
|
bitmap_set(array_info->set_mask, descs->ndescs,
|
|
count - descs->ndescs);
|
|
descs->info = array_info;
|
|
}
|
|
/* Unmark array members which don't belong to the 'fast' chip */
|
|
if (array_info && array_info->chip != chip) {
|
|
__clear_bit(descs->ndescs, array_info->get_mask);
|
|
__clear_bit(descs->ndescs, array_info->set_mask);
|
|
}
|
|
/*
|
|
* Detect array members which belong to the 'fast' chip
|
|
* but their pins are not in hardware order.
|
|
*/
|
|
else if (array_info &&
|
|
gpio_chip_hwgpio(desc) != descs->ndescs) {
|
|
/*
|
|
* Don't use fast path if all array members processed so
|
|
* far belong to the same chip as this one but its pin
|
|
* hardware number is different from its array index.
|
|
*/
|
|
if (bitmap_full(array_info->get_mask, descs->ndescs)) {
|
|
array_info = NULL;
|
|
} else {
|
|
__clear_bit(descs->ndescs,
|
|
array_info->get_mask);
|
|
__clear_bit(descs->ndescs,
|
|
array_info->set_mask);
|
|
}
|
|
} else if (array_info) {
|
|
/* Exclude open drain or open source from fast output */
|
|
if (gpiochip_line_is_open_drain(chip, descs->ndescs) ||
|
|
gpiochip_line_is_open_source(chip, descs->ndescs))
|
|
__clear_bit(descs->ndescs,
|
|
array_info->set_mask);
|
|
/* Identify 'fast' pins which require invertion */
|
|
if (gpiod_is_active_low(desc))
|
|
__set_bit(descs->ndescs,
|
|
array_info->invert_mask);
|
|
}
|
|
|
|
descs->ndescs++;
|
|
}
|
|
if (array_info)
|
|
dev_dbg(dev,
|
|
"GPIO array info: chip=%s, size=%d, get_mask=%lx, set_mask=%lx, invert_mask=%lx\n",
|
|
array_info->chip->label, array_info->size,
|
|
*array_info->get_mask, *array_info->set_mask,
|
|
*array_info->invert_mask);
|
|
return descs;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_get_array);
|
|
|
|
/**
|
|
* gpiod_get_array_optional - obtain multiple GPIOs from a multi-index GPIO
|
|
* function
|
|
* @dev: GPIO consumer, can be NULL for system-global GPIOs
|
|
* @con_id: function within the GPIO consumer
|
|
* @flags: optional GPIO initialization flags
|
|
*
|
|
* This is equivalent to gpiod_get_array(), except that when no GPIO was
|
|
* assigned to the requested function it will return NULL.
|
|
*/
|
|
struct gpio_descs *__must_check gpiod_get_array_optional(struct device *dev,
|
|
const char *con_id,
|
|
enum gpiod_flags flags)
|
|
{
|
|
struct gpio_descs *descs;
|
|
|
|
descs = gpiod_get_array(dev, con_id, flags);
|
|
if (IS_ERR(descs) && (PTR_ERR(descs) == -ENOENT))
|
|
return NULL;
|
|
|
|
return descs;
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_get_array_optional);
|
|
|
|
/**
|
|
* gpiod_put - dispose of a GPIO descriptor
|
|
* @desc: GPIO descriptor to dispose of
|
|
*
|
|
* No descriptor can be used after gpiod_put() has been called on it.
|
|
*/
|
|
void gpiod_put(struct gpio_desc *desc)
|
|
{
|
|
if (desc)
|
|
gpiod_free(desc);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_put);
|
|
|
|
/**
|
|
* gpiod_put_array - dispose of multiple GPIO descriptors
|
|
* @descs: struct gpio_descs containing an array of descriptors
|
|
*/
|
|
void gpiod_put_array(struct gpio_descs *descs)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < descs->ndescs; i++)
|
|
gpiod_put(descs->desc[i]);
|
|
|
|
kfree(descs);
|
|
}
|
|
EXPORT_SYMBOL_GPL(gpiod_put_array);
|
|
|
|
static int __init gpiolib_dev_init(void)
|
|
{
|
|
int ret;
|
|
|
|
/* Register GPIO sysfs bus */
|
|
ret = bus_register(&gpio_bus_type);
|
|
if (ret < 0) {
|
|
pr_err("gpiolib: could not register GPIO bus type\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpiochip");
|
|
if (ret < 0) {
|
|
pr_err("gpiolib: failed to allocate char dev region\n");
|
|
bus_unregister(&gpio_bus_type);
|
|
} else {
|
|
gpiolib_initialized = true;
|
|
gpiochip_setup_devs();
|
|
}
|
|
return ret;
|
|
}
|
|
core_initcall(gpiolib_dev_init);
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
|
|
static void gpiolib_dbg_show(struct seq_file *s, struct gpio_device *gdev)
|
|
{
|
|
unsigned i;
|
|
struct gpio_chip *chip = gdev->chip;
|
|
unsigned gpio = gdev->base;
|
|
struct gpio_desc *gdesc = &gdev->descs[0];
|
|
bool is_out;
|
|
bool is_irq;
|
|
bool active_low;
|
|
|
|
for (i = 0; i < gdev->ngpio; i++, gpio++, gdesc++) {
|
|
if (!test_bit(FLAG_REQUESTED, &gdesc->flags)) {
|
|
if (gdesc->name) {
|
|
seq_printf(s, " gpio-%-3d (%-20.20s)\n",
|
|
gpio, gdesc->name);
|
|
}
|
|
continue;
|
|
}
|
|
|
|
gpiod_get_direction(gdesc);
|
|
is_out = test_bit(FLAG_IS_OUT, &gdesc->flags);
|
|
is_irq = test_bit(FLAG_USED_AS_IRQ, &gdesc->flags);
|
|
active_low = test_bit(FLAG_ACTIVE_LOW, &gdesc->flags);
|
|
seq_printf(s, " gpio-%-3d (%-20.20s|%-20.20s) %s %s %s%s",
|
|
gpio, gdesc->name ? gdesc->name : "", gdesc->label,
|
|
is_out ? "out" : "in ",
|
|
chip->get ? (chip->get(chip, i) ? "hi" : "lo") : "? ",
|
|
is_irq ? "IRQ " : "",
|
|
active_low ? "ACTIVE LOW" : "");
|
|
seq_printf(s, "\n");
|
|
}
|
|
}
|
|
|
|
static void *gpiolib_seq_start(struct seq_file *s, loff_t *pos)
|
|
{
|
|
unsigned long flags;
|
|
struct gpio_device *gdev = NULL;
|
|
loff_t index = *pos;
|
|
|
|
s->private = "";
|
|
|
|
spin_lock_irqsave(&gpio_lock, flags);
|
|
list_for_each_entry(gdev, &gpio_devices, list)
|
|
if (index-- == 0) {
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
return gdev;
|
|
}
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void *gpiolib_seq_next(struct seq_file *s, void *v, loff_t *pos)
|
|
{
|
|
unsigned long flags;
|
|
struct gpio_device *gdev = v;
|
|
void *ret = NULL;
|
|
|
|
spin_lock_irqsave(&gpio_lock, flags);
|
|
if (list_is_last(&gdev->list, &gpio_devices))
|
|
ret = NULL;
|
|
else
|
|
ret = list_entry(gdev->list.next, struct gpio_device, list);
|
|
spin_unlock_irqrestore(&gpio_lock, flags);
|
|
|
|
s->private = "\n";
|
|
++*pos;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void gpiolib_seq_stop(struct seq_file *s, void *v)
|
|
{
|
|
}
|
|
|
|
static int gpiolib_seq_show(struct seq_file *s, void *v)
|
|
{
|
|
struct gpio_device *gdev = v;
|
|
struct gpio_chip *chip = gdev->chip;
|
|
struct device *parent;
|
|
|
|
if (!chip) {
|
|
seq_printf(s, "%s%s: (dangling chip)", (char *)s->private,
|
|
dev_name(&gdev->dev));
|
|
return 0;
|
|
}
|
|
|
|
seq_printf(s, "%s%s: GPIOs %d-%d", (char *)s->private,
|
|
dev_name(&gdev->dev),
|
|
gdev->base, gdev->base + gdev->ngpio - 1);
|
|
parent = chip->parent;
|
|
if (parent)
|
|
seq_printf(s, ", parent: %s/%s",
|
|
parent->bus ? parent->bus->name : "no-bus",
|
|
dev_name(parent));
|
|
if (chip->label)
|
|
seq_printf(s, ", %s", chip->label);
|
|
if (chip->can_sleep)
|
|
seq_printf(s, ", can sleep");
|
|
seq_printf(s, ":\n");
|
|
|
|
if (chip->dbg_show)
|
|
chip->dbg_show(s, chip);
|
|
else
|
|
gpiolib_dbg_show(s, gdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct seq_operations gpiolib_seq_ops = {
|
|
.start = gpiolib_seq_start,
|
|
.next = gpiolib_seq_next,
|
|
.stop = gpiolib_seq_stop,
|
|
.show = gpiolib_seq_show,
|
|
};
|
|
|
|
static int gpiolib_open(struct inode *inode, struct file *file)
|
|
{
|
|
return seq_open(file, &gpiolib_seq_ops);
|
|
}
|
|
|
|
static const struct file_operations gpiolib_operations = {
|
|
.owner = THIS_MODULE,
|
|
.open = gpiolib_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = seq_release,
|
|
};
|
|
|
|
static int __init gpiolib_debugfs_init(void)
|
|
{
|
|
/* /sys/kernel/debug/gpio */
|
|
(void) debugfs_create_file("gpio", S_IFREG | S_IRUGO,
|
|
NULL, NULL, &gpiolib_operations);
|
|
return 0;
|
|
}
|
|
subsys_initcall(gpiolib_debugfs_init);
|
|
|
|
#endif /* DEBUG_FS */
|