linux/arch/arm/mach-pxa
Igor Grinberg 8188097523 [ARM] pxa/cm-x300: update the memory fixup.
CM-X300 bootloader passes DRAM configuration information in ATAGS,
however, the first memory bank is reported at actual physical address 0x8000000.
Use the configuration information supplied by the bootloader and
cope with the necessity to have PHYS_ADDR=0xa0000000.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:02 +02:00
..
include/mach [ARM] pxa: remove pxa_gpio_mode() and files 2010-05-11 17:25:01 +02:00
am200epd.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
am300epd.c broadsheetfb: add multiple panel type support 2010-03-12 15:52:32 -08:00
balloon3.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
capc7117.c [ARM] pxa: add support for Embedian MXM-8x10 2010-03-02 07:40:51 +08:00
clock.c ARM: Consolidate clks_register() and similar 2010-02-12 17:32:36 +00:00
clock.h ARM: Consolidate clks_register() and similar 2010-02-12 17:32:36 +00:00
cm-x2xx-pci.c [ARM] pxa: use chip->ack() instead of accessing GEDR directly 2010-03-02 07:40:45 +08:00
cm-x2xx-pci.h [ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255 2008-10-07 12:05:05 +01:00
cm-x2xx.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
cm-x255.c [ARM] pxa: simplify the LCD pin configuration for pxa25x platforms 2010-03-02 07:40:46 +08:00
cm-x270.c [ARM] pxa/cm-x270: avoid direct access of GPIO/MFP registers 2010-03-02 07:40:48 +08:00
cm-x300.c [ARM] pxa/cm-x300: update the memory fixup. 2010-05-11 17:25:02 +02:00
colibri-pxa3xx.c pxa3xx_nand: move pxa3xx_nand.h common into plat directory 2009-12-01 09:02:43 +08:00
colibri-pxa270.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
colibri-pxa300.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
colibri-pxa320.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
corgi_pm.c [ARM] pxa/corgi: cleanup GPIO configurations and low power mode settings 2010-05-11 17:25:00 +02:00
corgi.c [ARM] pxa/corgi: cleanup GPIO configurations and low power mode settings 2010-05-11 17:25:00 +02:00
cpufreq-pxa2xx.c [ARM] pxa/cpufreq: fix index assignments for end marker 2009-11-20 14:23:13 -06:00
cpufreq-pxa3xx.c include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h 2010-03-30 22:02:32 +09:00
csb701.c [ARM] pxa/csb701: do not register devices on non-csb726 boads 2009-04-04 10:26:35 +08:00
csb726.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
devices.c [ARM] pxa: fix no reference of cpu_is_pxa25x() in devices.c 2009-12-16 21:35:52 +08:00
devices.h [ARM] pxa: add device definition for graphics controller 2009-09-10 18:49:27 +08:00
e330.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
e350.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
e400.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
e740.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
e750.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
e800.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
em-x270.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
eseries.c ARM: Consolidate clks_register() and similar 2010-02-12 17:32:36 +00:00
eseries.h [ARM] pxa: Add multi-io support for e-series 2008-12-15 03:29:34 +00:00
ezx.c [ARM] pxa/ezx: add leds-lp3944 support for A910 EZX phone 2009-12-01 09:03:03 +08:00
generic.c [ARM] pxa: remove pxa_gpio_mode() and files 2010-05-11 17:25:01 +02:00
generic.h [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
gumstix.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
h5000.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
himalaya.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
hx4700.c [ARM] pxa/hx4700: actually use platform_lcd driver 2009-12-01 09:03:15 +08:00
icontrol.c [ARM] pxa: add support for Embedian MXM-8x10 2010-03-02 07:40:51 +08:00
idp.c [ARM] pxa: simplify the LCD pin configuration for pxa25x platforms 2010-03-02 07:40:46 +08:00
imote2.c [ARM] pxa: remove spi cs gpio direction to avoid clash with driver 2010-03-22 12:03:06 +08:00
irq.c [ARM] pxa: fix irq suspend/resume for pxa25x 2010-01-13 21:01:09 +08:00
Kconfig [ARM] pxa/tosa: move CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES to mach/Kconfig 2010-05-11 17:25:00 +02:00
leds-idp.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
leds-lubbock.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
leds-mainstone.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
leds.c
leds.h
littleton.c [ARM] pxa: remove unnecessary #include of <mach/ssp.h> 2010-05-11 17:24:58 +02:00
lpd270.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
lubbock.c [ARM] sa1111: allow cascaded IRQs to be used by platforms 2010-03-02 07:40:51 +08:00
magician.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
mainstone.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
Makefile [ARM] pxa: move ssp into common plat-pxa 2010-05-11 17:24:58 +02:00
Makefile.boot
mfp-pxa2xx.c [ARM] pxa: allow MFP_LPM_INPUT to be explicitly specified 2010-05-11 17:25:00 +02:00
mfp-pxa3xx.c [ARM] pxa: move common MFP handling code into plat-pxa 2009-03-23 10:11:34 +08:00
mioa701_bootresume.S [ARM] pxa/MioA701: fix memory corruption. 2008-11-22 20:57:21 +08:00
mioa701.c include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h 2010-03-30 22:02:32 +09:00
mp900.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
mxm8x10.c [ARM] pxa: add support for Embedian MXM-8x10 2010-03-02 07:40:51 +08:00
palmld.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
palmt5.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
palmtc.c [ARM] pxa: simplify the LCD pin configuration for pxa25x platforms 2010-03-02 07:40:46 +08:00
palmte2.c [ARM] pxa: simplify the LCD pin configuration for pxa25x platforms 2010-03-02 07:40:46 +08:00
palmtreo.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
palmtx.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
palmz72.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
pcm027.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
pcm990-baseboard.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
pm.c include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h 2010-03-30 22:02:32 +09:00
poodle.c [ARM] pxa: move ssp into common plat-pxa 2010-05-11 17:24:58 +02:00
pxa2xx.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
pxa3xx.c [ARM] pxa: remove unnecessary #include of <mach/ssp.h> 2010-05-11 17:24:58 +02:00
pxa25x.c ARM: Consolidate clks_register() and similar 2010-02-12 17:32:36 +00:00
pxa27x.c Merge branch 'origin' into devel-stable 2010-03-08 20:21:04 +00:00
pxa300.c ARM: Consolidate clks_register() and similar 2010-02-12 17:32:36 +00:00
pxa320.c ARM: Consolidate clks_register() and similar 2010-02-12 17:32:36 +00:00
pxa930.c [ARM] pxa: support mfp of pxa935 2009-09-10 18:49:24 +08:00
raumfeld.c [ARM] pxa/raumfeld: fix button name 2010-05-06 11:12:11 +08:00
reset.c [ARM] pxa: allow gpio_reset drive high during normal work 2009-05-18 21:52:09 +08:00
saar.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
sharpsl_pm.c [ARM] pxa: remove pxa_gpio_mode() and files 2010-05-11 17:25:01 +02:00
sharpsl.h [ARM] pxa: remove now un-used corgi_ssp.c and corgi_lcd.c 2010-05-11 17:24:57 +02:00
sleep.S [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
smemc.c [ARM] pxa: avoid polluting the kernel's namespace 2008-11-28 16:04:54 +00:00
spitz_pm.c [ARM] pxa/spitz: use generic GPIO API and remove pxa_gpio_mode() 2010-05-11 17:25:00 +02:00
spitz.c [ARM] pxa/spitz: use generic GPIO API and remove pxa_gpio_mode() 2010-05-11 17:25:00 +02:00
standby.S [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
stargate2.c [ARM] pxa: remove spi cs gpio direction to avoid clash with driver 2010-03-22 12:03:06 +08:00
tavorevb.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
time.c arm/{pxa,sa1100,nomadik}: Don't disable irqs in set_next_event and set_mode 2010-01-22 17:04:52 +01:00
tosa-bt.c rfkill: rewrite 2009-06-03 14:06:13 -04:00
tosa.c [ARM] pxa/tosa: make use of the matrix keypad driver 2010-03-02 07:40:48 +08:00
trizeps4.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
viper.c [ARM] pxa/viper: fix timeout usage for I2C 2010-05-06 11:12:11 +08:00
xcep.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
zeus.c [ARM] pxa/zeus: Add support for mcp2515 CAN bus 2010-03-02 07:40:59 +08:00
zylonite_pxa300.c [ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot 2009-12-29 14:11:34 +08:00
zylonite_pxa320.c [ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot 2009-12-29 14:11:34 +08:00
zylonite.c [ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot 2009-12-29 14:11:34 +08:00