Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-22 12:11:40 +00:00
Code Issues Packages Projects Releases Wiki Activity
8165b57bca
linux/include/drm/drm_print.h
Jani Nikula fb6c7ab871 drm/print: introduce new struct drm_device based logging macros 
Add new struct drm_device based logging macros modeled after the core
kernel device based logging macros. These would be preferred over the
drm printk and struct device based macros in drm code, where possible.

We have existing drm specific struct device based logging functions, but
they are too verbose to use for two main reasons:

 * The names are unnecessarily long, for example DRM_DEV_DEBUG_KMS().

 * The use of struct device over struct drm_device is too generic for
   most users, leading to an extra dereference.

For example:

	DRM_DEV_DEBUG_KMS(drm->dev, "Hello, world\n");

vs.

	drm_dbg_kms(drm, "Hello, world\n");

It's a matter of taste, but the SHOUTING UPPERCASE has been argued to be
less readable than lowercase.

Some names are changed from old DRM names to be based on the core kernel
logging functions. For example, NOTE -> notice, ERROR -> err, DEBUG ->
dbg.

Due to the conflation of DRM_DEBUG and DRM_DEBUG_DRIVER macro use
(DRM_DEBUG is used widely in drivers though it's supposed to be a core
debugging category), they are named as drm_dbg_core and drm_dbg,
respectively.

The drm_err and _once/_ratelimited variants no longer include the
function name in order to be able to use the core device based logging
macros. Arguably this is not a significant change; error messages should
not be so common to be only distinguishable by the function name.

Ratelimited debug logging macros are to be added later.

Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210123050.8799-1-jani.nikula@intel.com
2019-12-17 16:43:20 +02:00

557 lines
16 KiB
C
Raw Blame History

/*
* Copyright (C) 2016 Red Hat
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors:
* Rob Clark <robdclark@gmail.com>
*/
#ifndef DRM_PRINT_H_
#define DRM_PRINT_H_
#include <linux/compiler.h>
#include <linux/printk.h>
#include <linux/seq_file.h>
#include <linux/device.h>
#include <linux/debugfs.h>
#include <drm/drm.h>
/* Do *not* use outside of drm_print.[ch]! */
extern unsigned int __drm_debug;
/**
* DOC: print
*
* A simple wrapper for dev_printk(), seq_printf(), etc. Allows same
* debug code to be used for both debugfs and printk logging.
*
* For example::
*
* void log_some_info(struct drm_printer *p)
* {
* drm_printf(p, "foo=%d\n", foo);
* drm_printf(p, "bar=%d\n", bar);
* }
*
* #ifdef CONFIG_DEBUG_FS
* void debugfs_show(struct seq_file *f)
* {
* struct drm_printer p = drm_seq_file_printer(f);
* log_some_info(&p);
* }
* #endif
*
* void some_other_function(...)
* {
* struct drm_printer p = drm_info_printer(drm->dev);
* log_some_info(&p);
* }
*/
/**
* struct drm_printer - drm output "stream"
*
* Do not use struct members directly. Use drm_printer_seq_file(),
* drm_printer_info(), etc to initialize. And drm_printf() for output.
*/
struct drm_printer {
/* private: */
void (*printfn)(struct drm_printer *p, struct va_format *vaf);
void (*puts)(struct drm_printer *p, const char *str);
void *arg;
const char *prefix;
};
void __drm_printfn_coredump(struct drm_printer *p, struct va_format *vaf);
void __drm_puts_coredump(struct drm_printer *p, const char *str);
void __drm_printfn_seq_file(struct drm_printer *p, struct va_format *vaf);
void __drm_puts_seq_file(struct drm_printer *p, const char *str);
void __drm_printfn_info(struct drm_printer *p, struct va_format *vaf);
void __drm_printfn_debug(struct drm_printer *p, struct va_format *vaf);
void __drm_printfn_err(struct drm_printer *p, struct va_format *vaf);
__printf(2, 3)
void drm_printf(struct drm_printer *p, const char *f, ...);
void drm_puts(struct drm_printer *p, const char *str);
void drm_print_regset32(struct drm_printer *p, struct debugfs_regset32 *regset);
void drm_print_bits(struct drm_printer *p, unsigned long value,
const char * const bits[], unsigned int nbits);
__printf(2, 0)
/**
* drm_vprintf - print to a &drm_printer stream
* @p: the &drm_printer
* @fmt: format string
* @va: the va_list
*/
static inline void
drm_vprintf(struct drm_printer *p, const char *fmt, va_list *va)
{
struct va_format vaf = { .fmt = fmt, .va = va };
p->printfn(p, &vaf);
}
/**
* drm_printf_indent - Print to a &drm_printer stream with indentation
* @printer: DRM printer
* @indent: Tab indentation level (max 5)
* @fmt: Format string
*/
#define drm_printf_indent(printer, indent, fmt, ...) \
drm_printf((printer), "%.*s" fmt, (indent), "\t\t\t\t\tX", ##__VA_ARGS__)
/**
* struct drm_print_iterator - local struct used with drm_printer_coredump
* @data: Pointer to the devcoredump output buffer
* @start: The offset within the buffer to start writing
* @remain: The number of bytes to write for this iteration
*/
struct drm_print_iterator {
void *data;
ssize_t start;
ssize_t remain;
/* private: */
ssize_t offset;
};
/**
* drm_coredump_printer - construct a &drm_printer that can output to a buffer
* from the read function for devcoredump
* @iter: A pointer to a struct drm_print_iterator for the read instance
*
* This wrapper extends drm_printf() to work with a dev_coredumpm() callback
* function. The passed in drm_print_iterator struct contains the buffer
* pointer, size and offset as passed in from devcoredump.
*
* For example::
*
* void coredump_read(char *buffer, loff_t offset, size_t count,
* void *data, size_t datalen)
* {
* struct drm_print_iterator iter;
* struct drm_printer p;
*
* iter.data = buffer;
* iter.start = offset;
* iter.remain = count;
*
* p = drm_coredump_printer(&iter);
*
* drm_printf(p, "foo=%d\n", foo);
* }
*
* void makecoredump(...)
* {
* ...
* dev_coredumpm(dev, THIS_MODULE, data, 0, GFP_KERNEL,
* coredump_read, ...)
* }
*
* RETURNS:
* The &drm_printer object
*/
static inline struct drm_printer
drm_coredump_printer(struct drm_print_iterator *iter)
{
struct drm_printer p = {
.printfn = __drm_printfn_coredump,
.puts = __drm_puts_coredump,
.arg = iter,
};
/* Set the internal offset of the iterator to zero */
iter->offset = 0;
return p;
}
/**
* drm_seq_file_printer - construct a &drm_printer that outputs to &seq_file
* @f: the &struct seq_file to output to
*
* RETURNS:
* The &drm_printer object
*/
static inline struct drm_printer drm_seq_file_printer(struct seq_file *f)
{
struct drm_printer p = {
.printfn = __drm_printfn_seq_file,
.puts = __drm_puts_seq_file,
.arg = f,
};
return p;
}
/**
* drm_info_printer - construct a &drm_printer that outputs to dev_printk()
* @dev: the &struct device pointer
*
* RETURNS:
* The &drm_printer object
*/
static inline struct drm_printer drm_info_printer(struct device *dev)
{
struct drm_printer p = {
.printfn = __drm_printfn_info,
.arg = dev,
};
return p;
}
/**
* drm_debug_printer - construct a &drm_printer that outputs to pr_debug()
* @prefix: debug output prefix
*
* RETURNS:
* The &drm_printer object
*/
static inline struct drm_printer drm_debug_printer(const char *prefix)
{
struct drm_printer p = {
.printfn = __drm_printfn_debug,
.prefix = prefix
};
return p;
}
/**
* drm_err_printer - construct a &drm_printer that outputs to pr_err()
* @prefix: debug output prefix
*
* RETURNS:
* The &drm_printer object
*/
static inline struct drm_printer drm_err_printer(const char *prefix)
{
struct drm_printer p = {
.printfn = __drm_printfn_err,
.prefix = prefix
};
return p;
}
/**
* enum drm_debug_category - The DRM debug categories
*
* Each of the DRM debug logging macros use a specific category, and the logging
* is filtered by the drm.debug module parameter. This enum specifies the values
* for the interface.
*
* Each DRM_DEBUG_<CATEGORY> macro logs to DRM_UT_<CATEGORY> category, except
* DRM_DEBUG() logs to DRM_UT_CORE.
*
* Enabling verbose debug messages is done through the drm.debug parameter, each
* category being enabled by a bit:
*
* - drm.debug=0x1 will enable CORE messages
* - drm.debug=0x2 will enable DRIVER messages
* - drm.debug=0x3 will enable CORE and DRIVER messages
* - ...
* - drm.debug=0x1ff will enable all messages
*
* An interesting feature is that it's possible to enable verbose logging at
* run-time by echoing the debug value in its sysfs node::
*
* # echo 0xf > /sys/module/drm/parameters/debug
*
*/
enum drm_debug_category {
/**
* @DRM_UT_CORE: Used in the generic drm code: drm_ioctl.c, drm_mm.c,
* drm_memory.c, ...
*/
DRM_UT_CORE = 0x01,
/**
* @DRM_UT_DRIVER: Used in the vendor specific part of the driver: i915,
* radeon, ... macro.
*/
DRM_UT_DRIVER = 0x02,
/**
* @DRM_UT_KMS: Used in the modesetting code.
*/
DRM_UT_KMS = 0x04,
/**
* @DRM_UT_PRIME: Used in the prime code.
*/
DRM_UT_PRIME = 0x08,
/**
* @DRM_UT_ATOMIC: Used in the atomic code.
*/
DRM_UT_ATOMIC = 0x10,
/**
* @DRM_UT_VBL: Used for verbose debug message in the vblank code.
*/
DRM_UT_VBL = 0x20,
/**
* @DRM_UT_STATE: Used for verbose atomic state debugging.
*/
DRM_UT_STATE = 0x40,
/**
* @DRM_UT_LEASE: Used in the lease code.
*/
DRM_UT_LEASE = 0x80,
/**
* @DRM_UT_DP: Used in the DP code.
*/
DRM_UT_DP = 0x100,
};
static inline bool drm_debug_enabled(enum drm_debug_category category)
{
return unlikely(__drm_debug & category);
}
/*
* struct device based logging
*
* Prefer drm_device based logging over device or prink based logging.
*/
__printf(3, 4)
void drm_dev_printk(const struct device *dev, const char *level,
const char *format, ...);
__printf(3, 4)
void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
const char *format, ...);
/**
* Error output.
*
* @dev: device pointer
* @fmt: printf() like format string.
*/
#define DRM_DEV_ERROR(dev, fmt, ...) \
drm_dev_printk(dev, KERN_ERR, "*ERROR* " fmt, ##__VA_ARGS__)
/**
* Rate limited error output. Like DRM_ERROR() but won't flood the log.
*
* @dev: device pointer
* @fmt: printf() like format string.
*/
#define DRM_DEV_ERROR_RATELIMITED(dev, fmt, ...) \
({ \
static DEFINE_RATELIMIT_STATE(_rs, \
DEFAULT_RATELIMIT_INTERVAL, \
DEFAULT_RATELIMIT_BURST); \
\
if (__ratelimit(&_rs)) \
DRM_DEV_ERROR(dev, fmt, ##__VA_ARGS__); \
})
#define DRM_DEV_INFO(dev, fmt, ...) \
drm_dev_printk(dev, KERN_INFO, fmt, ##__VA_ARGS__)
#define DRM_DEV_INFO_ONCE(dev, fmt, ...) \
({ \
static bool __print_once __read_mostly; \
if (!__print_once) { \
__print_once = true; \
DRM_DEV_INFO(dev, fmt, ##__VA_ARGS__); \
} \
})
/**
* Debug output.
*
* @dev: device pointer
* @fmt: printf() like format string.
*/
#define DRM_DEV_DEBUG(dev, fmt, ...) \
drm_dev_dbg(dev, DRM_UT_CORE, fmt, ##__VA_ARGS__)
#define DRM_DEV_DEBUG_DRIVER(dev, fmt, ...) \
drm_dev_dbg(dev, DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
#define DRM_DEV_DEBUG_KMS(dev, fmt, ...) \
drm_dev_dbg(dev, DRM_UT_KMS, fmt, ##__VA_ARGS__)
#define DRM_DEV_DEBUG_PRIME(dev, fmt, ...) \
drm_dev_dbg(dev, DRM_UT_PRIME, fmt, ##__VA_ARGS__)
#define DRM_DEV_DEBUG_ATOMIC(dev, fmt, ...) \
drm_dev_dbg(dev, DRM_UT_ATOMIC, fmt, ##__VA_ARGS__)
#define DRM_DEV_DEBUG_VBL(dev, fmt, ...) \
drm_dev_dbg(dev, DRM_UT_VBL, fmt, ##__VA_ARGS__)
#define DRM_DEV_DEBUG_DP(dev, fmt, ...) \
drm_dev_dbg(dev, DRM_UT_DP, fmt, ## __VA_ARGS__)
#define _DRM_DEV_DEFINE_DEBUG_RATELIMITED(dev, category, fmt, ...) \
({ \
static DEFINE_RATELIMIT_STATE(_rs, \
DEFAULT_RATELIMIT_INTERVAL, \
DEFAULT_RATELIMIT_BURST); \
if (__ratelimit(&_rs)) \
drm_dev_dbg(dev, category, fmt, ##__VA_ARGS__); \
})
/**
* Rate limited debug output. Like DRM_DEBUG() but won't flood the log.
*
* @dev: device pointer
* @fmt: printf() like format string.
*/
#define DRM_DEV_DEBUG_RATELIMITED(dev, fmt, ...) \
_DEV_DRM_DEFINE_DEBUG_RATELIMITED(dev, DRM_UT_CORE, \
fmt, ##__VA_ARGS__)
#define DRM_DEV_DEBUG_DRIVER_RATELIMITED(dev, fmt, ...) \
_DRM_DEV_DEFINE_DEBUG_RATELIMITED(dev, DRM_UT_DRIVER, \
fmt, ##__VA_ARGS__)
#define DRM_DEV_DEBUG_KMS_RATELIMITED(dev, fmt, ...) \
_DRM_DEV_DEFINE_DEBUG_RATELIMITED(dev, DRM_UT_KMS, \
fmt, ##__VA_ARGS__)
#define DRM_DEV_DEBUG_PRIME_RATELIMITED(dev, fmt, ...) \
_DRM_DEV_DEFINE_DEBUG_RATELIMITED(dev, DRM_UT_PRIME, \
fmt, ##__VA_ARGS__)
/*
* struct drm_device based logging
*
* Prefer drm_device based logging over device or prink based logging.
*/
/* Helper for struct drm_device based logging. */
#define __drm_printk(drm, level, type, fmt, ...) \
dev_##level##type((drm)->dev, "[drm] " fmt, ##__VA_ARGS__)
#define drm_info(drm, fmt, ...) \
__drm_printk((drm), info,, fmt, ##__VA_ARGS__)
#define drm_notice(drm, fmt, ...) \
__drm_printk((drm), notice,, fmt, ##__VA_ARGS__)
#define drm_warn(drm, fmt, ...) \
__drm_printk((drm), warn,, fmt, ##__VA_ARGS__)
#define drm_err(drm, fmt, ...) \
__drm_printk((drm), err,, "*ERROR* " fmt, ##__VA_ARGS__)
#define drm_info_once(drm, fmt, ...) \
__drm_printk((drm), info, _once, fmt, ##__VA_ARGS__)
#define drm_notice_once(drm, fmt, ...) \
__drm_printk((drm), notice, _once, fmt, ##__VA_ARGS__)
#define drm_warn_once(drm, fmt, ...) \
__drm_printk((drm), warn, _once, fmt, ##__VA_ARGS__)
#define drm_err_once(drm, fmt, ...) \
__drm_printk((drm), err, _once, "*ERROR* " fmt, ##__VA_ARGS__)
#define drm_err_ratelimited(drm, fmt, ...) \
__drm_printk((drm), err, _ratelimited, "*ERROR* " fmt, ##__VA_ARGS__)
#define drm_dbg_core(drm, fmt, ...) \
drm_dev_dbg((drm)->dev, DRM_UT_CORE, fmt, ##__VA_ARGS__)
#define drm_dbg(drm, fmt, ...) \
drm_dev_dbg((drm)->dev, DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
#define drm_dbg_kms(drm, fmt, ...) \
drm_dev_dbg((drm)->dev, DRM_UT_KMS, fmt, ##__VA_ARGS__)
#define drm_dbg_prime(drm, fmt, ...) \
drm_dev_dbg((drm)->dev, DRM_UT_PRIME, fmt, ##__VA_ARGS__)
#define drm_dbg_atomic(drm, fmt, ...) \
drm_dev_dbg((drm)->dev, DRM_UT_ATOMIC, fmt, ##__VA_ARGS__)
#define drm_dbg_vbl(drm, fmt, ...) \
drm_dev_dbg((drm)->dev, DRM_UT_VBL, fmt, ##__VA_ARGS__)
#define drm_dbg_state(drm, fmt, ...) \
drm_dev_dbg((drm)->dev, DRM_UT_STATE, fmt, ##__VA_ARGS__)
#define drm_dbg_lease(drm, fmt, ...) \
drm_dev_dbg((drm)->dev, DRM_UT_LEASE, fmt, ##__VA_ARGS__)
#define drm_dbg_dp(drm, fmt, ...) \
drm_dev_dbg((drm)->dev, DRM_UT_DP, fmt, ##__VA_ARGS__)
/*
* printk based logging
*
* Prefer drm_device based logging over device or prink based logging.
*/
__printf(2, 3)
void __drm_dbg(enum drm_debug_category category, const char *format, ...);
__printf(1, 2)
void __drm_err(const char *format, ...);
/* Macros to make printk easier */
#define _DRM_PRINTK(once, level, fmt, ...) \
printk##once(KERN_##level "[" DRM_NAME "] " fmt, ##__VA_ARGS__)
#define DRM_INFO(fmt, ...) \
_DRM_PRINTK(, INFO, fmt, ##__VA_ARGS__)
#define DRM_NOTE(fmt, ...) \
_DRM_PRINTK(, NOTICE, fmt, ##__VA_ARGS__)
#define DRM_WARN(fmt, ...) \
_DRM_PRINTK(, WARNING, fmt, ##__VA_ARGS__)
#define DRM_INFO_ONCE(fmt, ...) \
_DRM_PRINTK(_once, INFO, fmt, ##__VA_ARGS__)
#define DRM_NOTE_ONCE(fmt, ...) \
_DRM_PRINTK(_once, NOTICE, fmt, ##__VA_ARGS__)
#define DRM_WARN_ONCE(fmt, ...) \
_DRM_PRINTK(_once, WARNING, fmt, ##__VA_ARGS__)
#define DRM_ERROR(fmt, ...) \
__drm_err(fmt, ##__VA_ARGS__)
#define DRM_ERROR_RATELIMITED(fmt, ...) \
DRM_DEV_ERROR_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
#define DRM_DEBUG(fmt, ...) \
__drm_dbg(DRM_UT_CORE, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_DRIVER(fmt, ...) \
__drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_KMS(fmt, ...) \
__drm_dbg(DRM_UT_KMS, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_PRIME(fmt, ...) \
__drm_dbg(DRM_UT_PRIME, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_ATOMIC(fmt, ...) \
__drm_dbg(DRM_UT_ATOMIC, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_VBL(fmt, ...) \
__drm_dbg(DRM_UT_VBL, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_LEASE(fmt, ...) \
__drm_dbg(DRM_UT_LEASE, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_DP(fmt, ...) \
__drm_dbg(DRM_UT_DP, fmt, ## __VA_ARGS__)
#define DRM_DEBUG_RATELIMITED(fmt, ...) \
DRM_DEV_DEBUG_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_DRIVER_RATELIMITED(fmt, ...) \
DRM_DEV_DEBUG_DRIVER_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_KMS_RATELIMITED(fmt, ...) \
DRM_DEV_DEBUG_KMS_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_PRIME_RATELIMITED(fmt, ...) \
DRM_DEV_DEBUG_PRIME_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
#endif /* DRM_PRINT_H_ */
Reference in New Issue View Git Blame Copy Permalink