mirror of
https://github.com/torvalds/linux.git
synced 2024-11-13 23:51:39 +00:00
4f67130ad3
Tested with 8 bit Bayer and 8 bit monochrome video. create mode 100644 arch/arm/plat-mxc/include/mach/mx3_camera.h create mode 100644 drivers/media/video/mx3_camera.c Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
1184 lines
32 KiB
C
1184 lines
32 KiB
C
/*
|
|
* V4L2 Driver for i.MX3x camera host
|
|
*
|
|
* Copyright (C) 2008
|
|
* Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/version.h>
|
|
#include <linux/videodev2.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <media/v4l2-common.h>
|
|
#include <media/v4l2-dev.h>
|
|
#include <media/videobuf-dma-contig.h>
|
|
#include <media/soc_camera.h>
|
|
|
|
#include <mach/ipu.h>
|
|
#include <mach/mx3_camera.h>
|
|
|
|
#define MX3_CAM_DRV_NAME "mx3-camera"
|
|
|
|
/* CMOS Sensor Interface Registers */
|
|
#define CSI_REG_START 0x60
|
|
|
|
#define CSI_SENS_CONF (0x60 - CSI_REG_START)
|
|
#define CSI_SENS_FRM_SIZE (0x64 - CSI_REG_START)
|
|
#define CSI_ACT_FRM_SIZE (0x68 - CSI_REG_START)
|
|
#define CSI_OUT_FRM_CTRL (0x6C - CSI_REG_START)
|
|
#define CSI_TST_CTRL (0x70 - CSI_REG_START)
|
|
#define CSI_CCIR_CODE_1 (0x74 - CSI_REG_START)
|
|
#define CSI_CCIR_CODE_2 (0x78 - CSI_REG_START)
|
|
#define CSI_CCIR_CODE_3 (0x7C - CSI_REG_START)
|
|
#define CSI_FLASH_STROBE_1 (0x80 - CSI_REG_START)
|
|
#define CSI_FLASH_STROBE_2 (0x84 - CSI_REG_START)
|
|
|
|
#define CSI_SENS_CONF_VSYNC_POL_SHIFT 0
|
|
#define CSI_SENS_CONF_HSYNC_POL_SHIFT 1
|
|
#define CSI_SENS_CONF_DATA_POL_SHIFT 2
|
|
#define CSI_SENS_CONF_PIX_CLK_POL_SHIFT 3
|
|
#define CSI_SENS_CONF_SENS_PRTCL_SHIFT 4
|
|
#define CSI_SENS_CONF_SENS_CLKSRC_SHIFT 7
|
|
#define CSI_SENS_CONF_DATA_FMT_SHIFT 8
|
|
#define CSI_SENS_CONF_DATA_WIDTH_SHIFT 10
|
|
#define CSI_SENS_CONF_EXT_VSYNC_SHIFT 15
|
|
#define CSI_SENS_CONF_DIVRATIO_SHIFT 16
|
|
|
|
#define CSI_SENS_CONF_DATA_FMT_RGB_YUV444 (0UL << CSI_SENS_CONF_DATA_FMT_SHIFT)
|
|
#define CSI_SENS_CONF_DATA_FMT_YUV422 (2UL << CSI_SENS_CONF_DATA_FMT_SHIFT)
|
|
#define CSI_SENS_CONF_DATA_FMT_BAYER (3UL << CSI_SENS_CONF_DATA_FMT_SHIFT)
|
|
|
|
#define MAX_VIDEO_MEM 16
|
|
|
|
struct mx3_camera_buffer {
|
|
/* common v4l buffer stuff -- must be first */
|
|
struct videobuf_buffer vb;
|
|
const struct soc_camera_data_format *fmt;
|
|
|
|
/* One descriptot per scatterlist (per frame) */
|
|
struct dma_async_tx_descriptor *txd;
|
|
|
|
/* We have to "build" a scatterlist ourselves - one element per frame */
|
|
struct scatterlist sg;
|
|
};
|
|
|
|
/**
|
|
* struct mx3_camera_dev - i.MX3x camera (CSI) object
|
|
* @dev: camera device, to which the coherent buffer is attached
|
|
* @icd: currently attached camera sensor
|
|
* @clk: pointer to clock
|
|
* @base: remapped register base address
|
|
* @pdata: platform data
|
|
* @platform_flags: platform flags
|
|
* @mclk: master clock frequency in Hz
|
|
* @capture: list of capture videobuffers
|
|
* @lock: protects video buffer lists
|
|
* @active: active video buffer
|
|
* @idmac_channel: array of pointers to IPU DMAC DMA channels
|
|
* @soc_host: embedded soc_host object
|
|
*/
|
|
struct mx3_camera_dev {
|
|
struct device *dev;
|
|
/*
|
|
* i.MX3x is only supposed to handle one camera on its Camera Sensor
|
|
* Interface. If anyone ever builds hardware to enable more than one
|
|
* camera _simultaneously_, they will have to modify this driver too
|
|
*/
|
|
struct soc_camera_device *icd;
|
|
struct clk *clk;
|
|
|
|
void __iomem *base;
|
|
|
|
struct mx3_camera_pdata *pdata;
|
|
|
|
unsigned long platform_flags;
|
|
unsigned long mclk;
|
|
|
|
struct list_head capture;
|
|
spinlock_t lock; /* Protects video buffer lists */
|
|
struct mx3_camera_buffer *active;
|
|
|
|
/* IDMAC / dmaengine interface */
|
|
struct idmac_channel *idmac_channel[1]; /* We need one channel */
|
|
|
|
struct soc_camera_host soc_host;
|
|
};
|
|
|
|
struct dma_chan_request {
|
|
struct mx3_camera_dev *mx3_cam;
|
|
enum ipu_channel id;
|
|
};
|
|
|
|
static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt);
|
|
|
|
static u32 csi_reg_read(struct mx3_camera_dev *mx3, off_t reg)
|
|
{
|
|
return __raw_readl(mx3->base + reg);
|
|
}
|
|
|
|
static void csi_reg_write(struct mx3_camera_dev *mx3, u32 value, off_t reg)
|
|
{
|
|
__raw_writel(value, mx3->base + reg);
|
|
}
|
|
|
|
/* Called from the IPU IDMAC ISR */
|
|
static void mx3_cam_dma_done(void *arg)
|
|
{
|
|
struct idmac_tx_desc *desc = to_tx_desc(arg);
|
|
struct dma_chan *chan = desc->txd.chan;
|
|
struct idmac_channel *ichannel = to_idmac_chan(chan);
|
|
struct mx3_camera_dev *mx3_cam = ichannel->client;
|
|
struct videobuf_buffer *vb;
|
|
|
|
dev_dbg(chan->device->dev, "callback cookie %d, active DMA 0x%08x\n",
|
|
desc->txd.cookie, mx3_cam->active ? sg_dma_address(&mx3_cam->active->sg) : 0);
|
|
|
|
spin_lock(&mx3_cam->lock);
|
|
if (mx3_cam->active) {
|
|
vb = &mx3_cam->active->vb;
|
|
|
|
list_del_init(&vb->queue);
|
|
vb->state = VIDEOBUF_DONE;
|
|
do_gettimeofday(&vb->ts);
|
|
vb->field_count++;
|
|
wake_up(&vb->done);
|
|
}
|
|
|
|
if (list_empty(&mx3_cam->capture)) {
|
|
mx3_cam->active = NULL;
|
|
spin_unlock(&mx3_cam->lock);
|
|
|
|
/*
|
|
* stop capture - without further buffers IPU_CHA_BUF0_RDY will
|
|
* not get updated
|
|
*/
|
|
return;
|
|
}
|
|
|
|
mx3_cam->active = list_entry(mx3_cam->capture.next,
|
|
struct mx3_camera_buffer, vb.queue);
|
|
mx3_cam->active->vb.state = VIDEOBUF_ACTIVE;
|
|
spin_unlock(&mx3_cam->lock);
|
|
}
|
|
|
|
static void free_buffer(struct videobuf_queue *vq, struct mx3_camera_buffer *buf)
|
|
{
|
|
struct soc_camera_device *icd = vq->priv_data;
|
|
struct videobuf_buffer *vb = &buf->vb;
|
|
struct dma_async_tx_descriptor *txd = buf->txd;
|
|
struct idmac_channel *ichan;
|
|
|
|
BUG_ON(in_interrupt());
|
|
|
|
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
|
|
vb, vb->baddr, vb->bsize);
|
|
|
|
/*
|
|
* This waits until this buffer is out of danger, i.e., until it is no
|
|
* longer in STATE_QUEUED or STATE_ACTIVE
|
|
*/
|
|
videobuf_waiton(vb, 0, 0);
|
|
if (txd) {
|
|
ichan = to_idmac_chan(txd->chan);
|
|
async_tx_ack(txd);
|
|
}
|
|
videobuf_dma_contig_free(vq, vb);
|
|
buf->txd = NULL;
|
|
|
|
vb->state = VIDEOBUF_NEEDS_INIT;
|
|
}
|
|
|
|
/*
|
|
* Videobuf operations
|
|
*/
|
|
|
|
/*
|
|
* Calculate the __buffer__ (not data) size and number of buffers.
|
|
* Called with .vb_lock held
|
|
*/
|
|
static int mx3_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
|
|
unsigned int *size)
|
|
{
|
|
struct soc_camera_device *icd = vq->priv_data;
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
|
|
struct mx3_camera_dev *mx3_cam = ici->priv;
|
|
/*
|
|
* bits-per-pixel (depth) as specified in camera's pixel format does
|
|
* not necessarily match what the camera interface writes to RAM, but
|
|
* it should be good enough for now.
|
|
*/
|
|
unsigned int bpp = DIV_ROUND_UP(icd->current_fmt->depth, 8);
|
|
|
|
if (!mx3_cam->idmac_channel[0])
|
|
return -EINVAL;
|
|
|
|
*size = icd->width * icd->height * bpp;
|
|
|
|
if (!*count)
|
|
*count = 32;
|
|
|
|
if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024)
|
|
*count = MAX_VIDEO_MEM * 1024 * 1024 / *size;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Called with .vb_lock held */
|
|
static int mx3_videobuf_prepare(struct videobuf_queue *vq,
|
|
struct videobuf_buffer *vb, enum v4l2_field field)
|
|
{
|
|
struct soc_camera_device *icd = vq->priv_data;
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
|
|
struct mx3_camera_dev *mx3_cam = ici->priv;
|
|
struct mx3_camera_buffer *buf =
|
|
container_of(vb, struct mx3_camera_buffer, vb);
|
|
/* current_fmt _must_ always be set */
|
|
size_t new_size = icd->width * icd->height *
|
|
((icd->current_fmt->depth + 7) >> 3);
|
|
int ret;
|
|
|
|
/*
|
|
* I think, in buf_prepare you only have to protect global data,
|
|
* the actual buffer is yours
|
|
*/
|
|
|
|
if (buf->fmt != icd->current_fmt ||
|
|
vb->width != icd->width ||
|
|
vb->height != icd->height ||
|
|
vb->field != field) {
|
|
buf->fmt = icd->current_fmt;
|
|
vb->width = icd->width;
|
|
vb->height = icd->height;
|
|
vb->field = field;
|
|
if (vb->state != VIDEOBUF_NEEDS_INIT)
|
|
free_buffer(vq, buf);
|
|
}
|
|
|
|
if (vb->baddr && vb->bsize < new_size) {
|
|
/* User provided buffer, but it is too small */
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
if (vb->state == VIDEOBUF_NEEDS_INIT) {
|
|
struct idmac_channel *ichan = mx3_cam->idmac_channel[0];
|
|
struct scatterlist *sg = &buf->sg;
|
|
|
|
/*
|
|
* The total size of video-buffers that will be allocated / mapped.
|
|
* *size that we calculated in videobuf_setup gets assigned to
|
|
* vb->bsize, and now we use the same calculation to get vb->size.
|
|
*/
|
|
vb->size = new_size;
|
|
|
|
/* This actually (allocates and) maps buffers */
|
|
ret = videobuf_iolock(vq, vb, NULL);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
/*
|
|
* We will have to configure the IDMAC channel. It has two slots
|
|
* for DMA buffers, we shall enter the first two buffers there,
|
|
* and then submit new buffers in DMA-ready interrupts
|
|
*/
|
|
sg_init_table(sg, 1);
|
|
sg_dma_address(sg) = videobuf_to_dma_contig(vb);
|
|
sg_dma_len(sg) = vb->size;
|
|
|
|
buf->txd = ichan->dma_chan.device->device_prep_slave_sg(
|
|
&ichan->dma_chan, sg, 1, DMA_FROM_DEVICE,
|
|
DMA_PREP_INTERRUPT);
|
|
if (!buf->txd) {
|
|
ret = -EIO;
|
|
goto fail;
|
|
}
|
|
|
|
buf->txd->callback_param = buf->txd;
|
|
buf->txd->callback = mx3_cam_dma_done;
|
|
|
|
vb->state = VIDEOBUF_PREPARED;
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
free_buffer(vq, buf);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static enum pixel_fmt fourcc_to_ipu_pix(__u32 fourcc)
|
|
{
|
|
/* Add more formats as need arises and test possibilities appear... */
|
|
switch (fourcc) {
|
|
case V4L2_PIX_FMT_RGB565:
|
|
return IPU_PIX_FMT_RGB565;
|
|
case V4L2_PIX_FMT_RGB24:
|
|
return IPU_PIX_FMT_RGB24;
|
|
case V4L2_PIX_FMT_RGB332:
|
|
return IPU_PIX_FMT_RGB332;
|
|
case V4L2_PIX_FMT_YUV422P:
|
|
return IPU_PIX_FMT_YVU422P;
|
|
default:
|
|
return IPU_PIX_FMT_GENERIC;
|
|
}
|
|
}
|
|
|
|
/* Called with .vb_lock held */
|
|
static void mx3_videobuf_queue(struct videobuf_queue *vq,
|
|
struct videobuf_buffer *vb)
|
|
{
|
|
struct soc_camera_device *icd = vq->priv_data;
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
|
|
struct mx3_camera_dev *mx3_cam = ici->priv;
|
|
struct mx3_camera_buffer *buf =
|
|
container_of(vb, struct mx3_camera_buffer, vb);
|
|
struct dma_async_tx_descriptor *txd = buf->txd;
|
|
struct idmac_channel *ichan = to_idmac_chan(txd->chan);
|
|
struct idmac_video_param *video = &ichan->params.video;
|
|
const struct soc_camera_data_format *data_fmt = icd->current_fmt;
|
|
dma_cookie_t cookie;
|
|
unsigned long flags;
|
|
|
|
/* This is the configuration of one sg-element */
|
|
video->out_pixel_fmt = fourcc_to_ipu_pix(data_fmt->fourcc);
|
|
video->out_width = icd->width;
|
|
video->out_height = icd->height;
|
|
video->out_stride = icd->width;
|
|
|
|
#ifdef DEBUG
|
|
/* helps to see what DMA actually has written */
|
|
memset((void *)vb->baddr, 0xaa, vb->bsize);
|
|
#endif
|
|
|
|
spin_lock_irqsave(&mx3_cam->lock, flags);
|
|
|
|
list_add_tail(&vb->queue, &mx3_cam->capture);
|
|
|
|
if (!mx3_cam->active) {
|
|
mx3_cam->active = buf;
|
|
vb->state = VIDEOBUF_ACTIVE;
|
|
} else {
|
|
vb->state = VIDEOBUF_QUEUED;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&mx3_cam->lock, flags);
|
|
|
|
cookie = txd->tx_submit(txd);
|
|
dev_dbg(&icd->dev, "Submitted cookie %d DMA 0x%08x\n", cookie, sg_dma_address(&buf->sg));
|
|
if (cookie >= 0)
|
|
return;
|
|
|
|
/* Submit error */
|
|
vb->state = VIDEOBUF_PREPARED;
|
|
|
|
spin_lock_irqsave(&mx3_cam->lock, flags);
|
|
|
|
list_del_init(&vb->queue);
|
|
|
|
if (mx3_cam->active == buf)
|
|
mx3_cam->active = NULL;
|
|
|
|
spin_unlock_irqrestore(&mx3_cam->lock, flags);
|
|
}
|
|
|
|
/* Called with .vb_lock held */
|
|
static void mx3_videobuf_release(struct videobuf_queue *vq,
|
|
struct videobuf_buffer *vb)
|
|
{
|
|
struct soc_camera_device *icd = vq->priv_data;
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
|
|
struct mx3_camera_dev *mx3_cam = ici->priv;
|
|
struct mx3_camera_buffer *buf =
|
|
container_of(vb, struct mx3_camera_buffer, vb);
|
|
unsigned long flags;
|
|
|
|
dev_dbg(&icd->dev, "Release%s DMA 0x%08x (state %d), queue %sempty\n",
|
|
mx3_cam->active == buf ? " active" : "", sg_dma_address(&buf->sg),
|
|
vb->state, list_empty(&vb->queue) ? "" : "not ");
|
|
spin_lock_irqsave(&mx3_cam->lock, flags);
|
|
if ((vb->state == VIDEOBUF_ACTIVE || vb->state == VIDEOBUF_QUEUED) &&
|
|
!list_empty(&vb->queue)) {
|
|
vb->state = VIDEOBUF_ERROR;
|
|
|
|
list_del_init(&vb->queue);
|
|
if (mx3_cam->active == buf)
|
|
mx3_cam->active = NULL;
|
|
}
|
|
spin_unlock_irqrestore(&mx3_cam->lock, flags);
|
|
free_buffer(vq, buf);
|
|
}
|
|
|
|
static struct videobuf_queue_ops mx3_videobuf_ops = {
|
|
.buf_setup = mx3_videobuf_setup,
|
|
.buf_prepare = mx3_videobuf_prepare,
|
|
.buf_queue = mx3_videobuf_queue,
|
|
.buf_release = mx3_videobuf_release,
|
|
};
|
|
|
|
static void mx3_camera_init_videobuf(struct videobuf_queue *q,
|
|
struct soc_camera_device *icd)
|
|
{
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
|
|
struct mx3_camera_dev *mx3_cam = ici->priv;
|
|
|
|
videobuf_queue_dma_contig_init(q, &mx3_videobuf_ops, mx3_cam->dev,
|
|
&mx3_cam->lock,
|
|
V4L2_BUF_TYPE_VIDEO_CAPTURE,
|
|
V4L2_FIELD_NONE,
|
|
sizeof(struct mx3_camera_buffer), icd);
|
|
}
|
|
|
|
/* First part of ipu_csi_init_interface() */
|
|
static void mx3_camera_activate(struct mx3_camera_dev *mx3_cam,
|
|
struct soc_camera_device *icd)
|
|
{
|
|
u32 conf;
|
|
long rate;
|
|
|
|
/* Set default size: ipu_csi_set_window_size() */
|
|
csi_reg_write(mx3_cam, (640 - 1) | ((480 - 1) << 16), CSI_ACT_FRM_SIZE);
|
|
/* ...and position to 0:0: ipu_csi_set_window_pos() */
|
|
conf = csi_reg_read(mx3_cam, CSI_OUT_FRM_CTRL) & 0xffff0000;
|
|
csi_reg_write(mx3_cam, conf, CSI_OUT_FRM_CTRL);
|
|
|
|
/* We use only gated clock synchronisation mode so far */
|
|
conf = 0 << CSI_SENS_CONF_SENS_PRTCL_SHIFT;
|
|
|
|
/* Set generic data, platform-biggest bus-width */
|
|
conf |= CSI_SENS_CONF_DATA_FMT_BAYER;
|
|
|
|
if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_15)
|
|
conf |= 3 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
|
|
else if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_10)
|
|
conf |= 2 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
|
|
else if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_8)
|
|
conf |= 1 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
|
|
else/* if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_4)*/
|
|
conf |= 0 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
|
|
|
|
if (mx3_cam->platform_flags & MX3_CAMERA_CLK_SRC)
|
|
conf |= 1 << CSI_SENS_CONF_SENS_CLKSRC_SHIFT;
|
|
if (mx3_cam->platform_flags & MX3_CAMERA_EXT_VSYNC)
|
|
conf |= 1 << CSI_SENS_CONF_EXT_VSYNC_SHIFT;
|
|
if (mx3_cam->platform_flags & MX3_CAMERA_DP)
|
|
conf |= 1 << CSI_SENS_CONF_DATA_POL_SHIFT;
|
|
if (mx3_cam->platform_flags & MX3_CAMERA_PCP)
|
|
conf |= 1 << CSI_SENS_CONF_PIX_CLK_POL_SHIFT;
|
|
if (mx3_cam->platform_flags & MX3_CAMERA_HSP)
|
|
conf |= 1 << CSI_SENS_CONF_HSYNC_POL_SHIFT;
|
|
if (mx3_cam->platform_flags & MX3_CAMERA_VSP)
|
|
conf |= 1 << CSI_SENS_CONF_VSYNC_POL_SHIFT;
|
|
|
|
/* ipu_csi_init_interface() */
|
|
csi_reg_write(mx3_cam, conf, CSI_SENS_CONF);
|
|
|
|
clk_enable(mx3_cam->clk);
|
|
rate = clk_round_rate(mx3_cam->clk, mx3_cam->mclk);
|
|
dev_dbg(&icd->dev, "Set SENS_CONF to %x, rate %ld\n", conf, rate);
|
|
if (rate)
|
|
clk_set_rate(mx3_cam->clk, rate);
|
|
}
|
|
|
|
/* Called with .video_lock held */
|
|
static int mx3_camera_add_device(struct soc_camera_device *icd)
|
|
{
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
|
|
struct mx3_camera_dev *mx3_cam = ici->priv;
|
|
int ret;
|
|
|
|
if (mx3_cam->icd) {
|
|
ret = -EBUSY;
|
|
goto ebusy;
|
|
}
|
|
|
|
mx3_camera_activate(mx3_cam, icd);
|
|
ret = icd->ops->init(icd);
|
|
if (ret < 0) {
|
|
clk_disable(mx3_cam->clk);
|
|
goto einit;
|
|
}
|
|
|
|
mx3_cam->icd = icd;
|
|
|
|
einit:
|
|
ebusy:
|
|
if (!ret)
|
|
dev_info(&icd->dev, "MX3 Camera driver attached to camera %d\n",
|
|
icd->devnum);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Called with .video_lock held */
|
|
static void mx3_camera_remove_device(struct soc_camera_device *icd)
|
|
{
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
|
|
struct mx3_camera_dev *mx3_cam = ici->priv;
|
|
struct idmac_channel **ichan = &mx3_cam->idmac_channel[0];
|
|
|
|
BUG_ON(icd != mx3_cam->icd);
|
|
|
|
if (*ichan) {
|
|
dma_release_channel(&(*ichan)->dma_chan);
|
|
*ichan = NULL;
|
|
}
|
|
|
|
icd->ops->release(icd);
|
|
|
|
clk_disable(mx3_cam->clk);
|
|
|
|
mx3_cam->icd = NULL;
|
|
|
|
dev_info(&icd->dev, "MX3 Camera driver detached from camera %d\n",
|
|
icd->devnum);
|
|
}
|
|
|
|
static bool channel_change_requested(struct soc_camera_device *icd,
|
|
const struct soc_camera_format_xlate *xlate,
|
|
__u32 pixfmt, struct v4l2_rect *rect)
|
|
{
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
|
|
struct mx3_camera_dev *mx3_cam = ici->priv;
|
|
struct idmac_channel *ichan = mx3_cam->idmac_channel[0];
|
|
|
|
/* So far only one configuration is supported */
|
|
return pixfmt || (ichan && rect->width * rect->height >
|
|
icd->width * icd->height);
|
|
}
|
|
|
|
static int test_platform_param(struct mx3_camera_dev *mx3_cam,
|
|
unsigned char buswidth, unsigned long *flags)
|
|
{
|
|
/*
|
|
* Platform specified synchronization and pixel clock polarities are
|
|
* only a recommendation and are only used during probing. MX3x
|
|
* camera interface only works in master mode, i.e., uses HSYNC and
|
|
* VSYNC signals from the sensor
|
|
*/
|
|
*flags = SOCAM_MASTER |
|
|
SOCAM_HSYNC_ACTIVE_HIGH |
|
|
SOCAM_HSYNC_ACTIVE_LOW |
|
|
SOCAM_VSYNC_ACTIVE_HIGH |
|
|
SOCAM_VSYNC_ACTIVE_LOW |
|
|
SOCAM_PCLK_SAMPLE_RISING |
|
|
SOCAM_PCLK_SAMPLE_FALLING |
|
|
SOCAM_DATA_ACTIVE_HIGH |
|
|
SOCAM_DATA_ACTIVE_LOW;
|
|
|
|
/* If requested data width is supported by the platform, use it or any
|
|
* possible lower value - i.MX31 is smart enough to schift bits */
|
|
switch (buswidth) {
|
|
case 15:
|
|
if (!(mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_15))
|
|
return -EINVAL;
|
|
*flags |= SOCAM_DATAWIDTH_15 | SOCAM_DATAWIDTH_10 |
|
|
SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_4;
|
|
break;
|
|
case 10:
|
|
if (!(mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_10))
|
|
return -EINVAL;
|
|
*flags |= SOCAM_DATAWIDTH_10 | SOCAM_DATAWIDTH_8 |
|
|
SOCAM_DATAWIDTH_4;
|
|
break;
|
|
case 8:
|
|
if (!(mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_8))
|
|
return -EINVAL;
|
|
*flags |= SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_4;
|
|
break;
|
|
case 4:
|
|
if (!(mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_4))
|
|
return -EINVAL;
|
|
*flags |= SOCAM_DATAWIDTH_4;
|
|
break;
|
|
default:
|
|
dev_info(mx3_cam->dev, "Unsupported bus width %d\n", buswidth);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mx3_camera_try_bus_param(struct soc_camera_device *icd,
|
|
const unsigned int depth)
|
|
{
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
|
|
struct mx3_camera_dev *mx3_cam = ici->priv;
|
|
unsigned long bus_flags, camera_flags;
|
|
int ret = test_platform_param(mx3_cam, depth, &bus_flags);
|
|
|
|
dev_dbg(&ici->dev, "requested bus width %d bit: %d\n", depth, ret);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
camera_flags = icd->ops->query_bus_param(icd);
|
|
|
|
ret = soc_camera_bus_param_compatible(camera_flags, bus_flags);
|
|
if (ret < 0)
|
|
dev_warn(&icd->dev, "Flags incompatible: camera %lx, host %lx\n",
|
|
camera_flags, bus_flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static bool chan_filter(struct dma_chan *chan, void *arg)
|
|
{
|
|
struct dma_chan_request *rq = arg;
|
|
struct mx3_camera_pdata *pdata;
|
|
|
|
if (!rq)
|
|
return false;
|
|
|
|
pdata = rq->mx3_cam->dev->platform_data;
|
|
|
|
return rq->id == chan->chan_id &&
|
|
pdata->dma_dev == chan->device->dev;
|
|
}
|
|
|
|
static const struct soc_camera_data_format mx3_camera_formats[] = {
|
|
{
|
|
.name = "Bayer (sRGB) 8 bit",
|
|
.depth = 8,
|
|
.fourcc = V4L2_PIX_FMT_SBGGR8,
|
|
.colorspace = V4L2_COLORSPACE_SRGB,
|
|
}, {
|
|
.name = "Monochrome 8 bit",
|
|
.depth = 8,
|
|
.fourcc = V4L2_PIX_FMT_GREY,
|
|
.colorspace = V4L2_COLORSPACE_JPEG,
|
|
},
|
|
};
|
|
|
|
static bool buswidth_supported(struct soc_camera_host *ici, int depth)
|
|
{
|
|
struct mx3_camera_dev *mx3_cam = ici->priv;
|
|
|
|
switch (depth) {
|
|
case 4:
|
|
return !!(mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_4);
|
|
case 8:
|
|
return !!(mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_8);
|
|
case 10:
|
|
return !!(mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_10);
|
|
case 15:
|
|
return !!(mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_15);
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static int mx3_camera_get_formats(struct soc_camera_device *icd, int idx,
|
|
struct soc_camera_format_xlate *xlate)
|
|
{
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
|
|
int formats = 0, buswidth, ret;
|
|
|
|
buswidth = icd->formats[idx].depth;
|
|
|
|
if (!buswidth_supported(ici, buswidth))
|
|
return 0;
|
|
|
|
ret = mx3_camera_try_bus_param(icd, buswidth);
|
|
if (ret < 0)
|
|
return 0;
|
|
|
|
switch (icd->formats[idx].fourcc) {
|
|
case V4L2_PIX_FMT_SGRBG10:
|
|
formats++;
|
|
if (xlate) {
|
|
xlate->host_fmt = &mx3_camera_formats[0];
|
|
xlate->cam_fmt = icd->formats + idx;
|
|
xlate->buswidth = buswidth;
|
|
xlate++;
|
|
dev_dbg(&ici->dev, "Providing format %s using %s\n",
|
|
mx3_camera_formats[0].name,
|
|
icd->formats[idx].name);
|
|
}
|
|
goto passthrough;
|
|
case V4L2_PIX_FMT_Y16:
|
|
formats++;
|
|
if (xlate) {
|
|
xlate->host_fmt = &mx3_camera_formats[1];
|
|
xlate->cam_fmt = icd->formats + idx;
|
|
xlate->buswidth = buswidth;
|
|
xlate++;
|
|
dev_dbg(&ici->dev, "Providing format %s using %s\n",
|
|
mx3_camera_formats[0].name,
|
|
icd->formats[idx].name);
|
|
}
|
|
default:
|
|
passthrough:
|
|
/* Generic pass-through */
|
|
formats++;
|
|
if (xlate) {
|
|
xlate->host_fmt = icd->formats + idx;
|
|
xlate->cam_fmt = icd->formats + idx;
|
|
xlate->buswidth = buswidth;
|
|
xlate++;
|
|
dev_dbg(&ici->dev,
|
|
"Providing format %s in pass-through mode\n",
|
|
icd->formats[idx].name);
|
|
}
|
|
}
|
|
|
|
return formats;
|
|
}
|
|
|
|
static int mx3_camera_set_fmt(struct soc_camera_device *icd,
|
|
__u32 pixfmt, struct v4l2_rect *rect)
|
|
{
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
|
|
struct mx3_camera_dev *mx3_cam = ici->priv;
|
|
const struct soc_camera_format_xlate *xlate;
|
|
u32 ctrl, width_field, height_field;
|
|
int ret;
|
|
|
|
xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
|
|
if (pixfmt && !xlate) {
|
|
dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* We now know pixel formats and can decide upon DMA-channel(s)
|
|
* So far only direct camera-to-memory is supported
|
|
*/
|
|
if (channel_change_requested(icd, xlate, pixfmt, rect)) {
|
|
dma_cap_mask_t mask;
|
|
struct dma_chan *chan;
|
|
struct idmac_channel **ichan = &mx3_cam->idmac_channel[0];
|
|
/* We have to use IDMAC_IC_7 for Bayer / generic data */
|
|
struct dma_chan_request rq = {.mx3_cam = mx3_cam,
|
|
.id = IDMAC_IC_7};
|
|
|
|
if (*ichan) {
|
|
struct videobuf_buffer *vb, *_vb;
|
|
dma_release_channel(&(*ichan)->dma_chan);
|
|
*ichan = NULL;
|
|
mx3_cam->active = NULL;
|
|
list_for_each_entry_safe(vb, _vb, &mx3_cam->capture, queue) {
|
|
list_del_init(&vb->queue);
|
|
vb->state = VIDEOBUF_ERROR;
|
|
wake_up(&vb->done);
|
|
}
|
|
}
|
|
|
|
dma_cap_zero(mask);
|
|
dma_cap_set(DMA_SLAVE, mask);
|
|
dma_cap_set(DMA_PRIVATE, mask);
|
|
chan = dma_request_channel(mask, chan_filter, &rq);
|
|
if (!chan)
|
|
return -EBUSY;
|
|
|
|
*ichan = to_idmac_chan(chan);
|
|
(*ichan)->client = mx3_cam;
|
|
}
|
|
|
|
/*
|
|
* Might have to perform a complete interface initialisation like in
|
|
* ipu_csi_init_interface() in mxc_v4l2_s_param(). Also consider
|
|
* mxc_v4l2_s_fmt()
|
|
*/
|
|
|
|
/* Setup frame size - this cannot be changed on-the-fly... */
|
|
width_field = rect->width - 1;
|
|
height_field = rect->height - 1;
|
|
csi_reg_write(mx3_cam, width_field | (height_field << 16), CSI_SENS_FRM_SIZE);
|
|
|
|
csi_reg_write(mx3_cam, width_field << 16, CSI_FLASH_STROBE_1);
|
|
csi_reg_write(mx3_cam, (height_field << 16) | 0x22, CSI_FLASH_STROBE_2);
|
|
|
|
csi_reg_write(mx3_cam, width_field | (height_field << 16), CSI_ACT_FRM_SIZE);
|
|
|
|
/* ...and position */
|
|
ctrl = csi_reg_read(mx3_cam, CSI_OUT_FRM_CTRL) & 0xffff0000;
|
|
/* Sensor does the cropping */
|
|
csi_reg_write(mx3_cam, ctrl | 0 | (0 << 8), CSI_OUT_FRM_CTRL);
|
|
|
|
/*
|
|
* No need to free resources here if we fail, we'll see if we need to
|
|
* do this next time we are called
|
|
*/
|
|
|
|
ret = icd->ops->set_fmt(icd, pixfmt ? xlate->cam_fmt->fourcc : 0, rect);
|
|
if (pixfmt && !ret) {
|
|
icd->buswidth = xlate->buswidth;
|
|
icd->current_fmt = xlate->host_fmt;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mx3_camera_try_fmt(struct soc_camera_device *icd,
|
|
struct v4l2_format *f)
|
|
{
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
|
|
const struct soc_camera_format_xlate *xlate;
|
|
struct v4l2_pix_format *pix = &f->fmt.pix;
|
|
__u32 pixfmt = pix->pixelformat;
|
|
enum v4l2_field field;
|
|
int ret;
|
|
|
|
xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
|
|
if (pixfmt && !xlate) {
|
|
dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* limit to MX3 hardware capabilities */
|
|
if (pix->height > 4096)
|
|
pix->height = 4096;
|
|
if (pix->width > 4096)
|
|
pix->width = 4096;
|
|
|
|
pix->bytesperline = pix->width *
|
|
DIV_ROUND_UP(xlate->host_fmt->depth, 8);
|
|
pix->sizeimage = pix->height * pix->bytesperline;
|
|
|
|
/* camera has to see its format, but the user the original one */
|
|
pix->pixelformat = xlate->cam_fmt->fourcc;
|
|
/* limit to sensor capabilities */
|
|
ret = icd->ops->try_fmt(icd, f);
|
|
pix->pixelformat = xlate->host_fmt->fourcc;
|
|
|
|
field = pix->field;
|
|
|
|
if (field == V4L2_FIELD_ANY) {
|
|
pix->field = V4L2_FIELD_NONE;
|
|
} else if (field != V4L2_FIELD_NONE) {
|
|
dev_err(&icd->dev, "Field type %d unsupported.\n", field);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mx3_camera_reqbufs(struct soc_camera_file *icf,
|
|
struct v4l2_requestbuffers *p)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int mx3_camera_poll(struct file *file, poll_table *pt)
|
|
{
|
|
struct soc_camera_file *icf = file->private_data;
|
|
|
|
return videobuf_poll_stream(file, &icf->vb_vidq, pt);
|
|
}
|
|
|
|
static int mx3_camera_querycap(struct soc_camera_host *ici,
|
|
struct v4l2_capability *cap)
|
|
{
|
|
/* cap->name is set by the firendly caller:-> */
|
|
strlcpy(cap->card, "i.MX3x Camera", sizeof(cap->card));
|
|
cap->version = KERNEL_VERSION(0, 2, 2);
|
|
cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
|
|
{
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
|
|
struct mx3_camera_dev *mx3_cam = ici->priv;
|
|
unsigned long bus_flags, camera_flags, common_flags;
|
|
u32 dw, sens_conf;
|
|
int ret = test_platform_param(mx3_cam, icd->buswidth, &bus_flags);
|
|
const struct soc_camera_format_xlate *xlate;
|
|
|
|
xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
|
|
if (!xlate) {
|
|
dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_dbg(&ici->dev, "requested bus width %d bit: %d\n",
|
|
icd->buswidth, ret);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
camera_flags = icd->ops->query_bus_param(icd);
|
|
|
|
common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags);
|
|
if (!common_flags) {
|
|
dev_dbg(&ici->dev, "no common flags: camera %lx, host %lx\n",
|
|
camera_flags, bus_flags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Make choices, based on platform preferences */
|
|
if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
|
|
(common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
|
|
if (mx3_cam->platform_flags & MX3_CAMERA_HSP)
|
|
common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
|
|
else
|
|
common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
|
|
}
|
|
|
|
if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
|
|
(common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
|
|
if (mx3_cam->platform_flags & MX3_CAMERA_VSP)
|
|
common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
|
|
else
|
|
common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
|
|
}
|
|
|
|
if ((common_flags & SOCAM_DATA_ACTIVE_HIGH) &&
|
|
(common_flags & SOCAM_DATA_ACTIVE_LOW)) {
|
|
if (mx3_cam->platform_flags & MX3_CAMERA_DP)
|
|
common_flags &= ~SOCAM_DATA_ACTIVE_HIGH;
|
|
else
|
|
common_flags &= ~SOCAM_DATA_ACTIVE_LOW;
|
|
}
|
|
|
|
if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
|
|
(common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
|
|
if (mx3_cam->platform_flags & MX3_CAMERA_PCP)
|
|
common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
|
|
else
|
|
common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
|
|
}
|
|
|
|
/* Make the camera work in widest common mode, we'll take care of
|
|
* the rest */
|
|
if (common_flags & SOCAM_DATAWIDTH_15)
|
|
common_flags = (common_flags & ~SOCAM_DATAWIDTH_MASK) |
|
|
SOCAM_DATAWIDTH_15;
|
|
else if (common_flags & SOCAM_DATAWIDTH_10)
|
|
common_flags = (common_flags & ~SOCAM_DATAWIDTH_MASK) |
|
|
SOCAM_DATAWIDTH_10;
|
|
else if (common_flags & SOCAM_DATAWIDTH_8)
|
|
common_flags = (common_flags & ~SOCAM_DATAWIDTH_MASK) |
|
|
SOCAM_DATAWIDTH_8;
|
|
else
|
|
common_flags = (common_flags & ~SOCAM_DATAWIDTH_MASK) |
|
|
SOCAM_DATAWIDTH_4;
|
|
|
|
ret = icd->ops->set_bus_param(icd, common_flags);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* So far only gated clock mode is supported. Add a line
|
|
* (3 << CSI_SENS_CONF_SENS_PRTCL_SHIFT) |
|
|
* below and select the required mode when supporting other
|
|
* synchronisation protocols.
|
|
*/
|
|
sens_conf = csi_reg_read(mx3_cam, CSI_SENS_CONF) &
|
|
~((1 << CSI_SENS_CONF_VSYNC_POL_SHIFT) |
|
|
(1 << CSI_SENS_CONF_HSYNC_POL_SHIFT) |
|
|
(1 << CSI_SENS_CONF_DATA_POL_SHIFT) |
|
|
(1 << CSI_SENS_CONF_PIX_CLK_POL_SHIFT) |
|
|
(3 << CSI_SENS_CONF_DATA_FMT_SHIFT) |
|
|
(3 << CSI_SENS_CONF_DATA_WIDTH_SHIFT));
|
|
|
|
/* TODO: Support RGB and YUV formats */
|
|
|
|
/* This has been set in mx3_camera_activate(), but we clear it above */
|
|
sens_conf |= CSI_SENS_CONF_DATA_FMT_BAYER;
|
|
|
|
if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
|
|
sens_conf |= 1 << CSI_SENS_CONF_PIX_CLK_POL_SHIFT;
|
|
if (common_flags & SOCAM_HSYNC_ACTIVE_LOW)
|
|
sens_conf |= 1 << CSI_SENS_CONF_HSYNC_POL_SHIFT;
|
|
if (common_flags & SOCAM_VSYNC_ACTIVE_LOW)
|
|
sens_conf |= 1 << CSI_SENS_CONF_VSYNC_POL_SHIFT;
|
|
if (common_flags & SOCAM_DATA_ACTIVE_LOW)
|
|
sens_conf |= 1 << CSI_SENS_CONF_DATA_POL_SHIFT;
|
|
|
|
/* Just do what we're asked to do */
|
|
switch (xlate->host_fmt->depth) {
|
|
case 4:
|
|
dw = 0 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
|
|
break;
|
|
case 8:
|
|
dw = 1 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
|
|
break;
|
|
case 10:
|
|
dw = 2 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
|
|
break;
|
|
default:
|
|
/*
|
|
* Actually it can only be 15 now, default is just to silence
|
|
* compiler warnings
|
|
*/
|
|
case 15:
|
|
dw = 3 << CSI_SENS_CONF_DATA_WIDTH_SHIFT;
|
|
}
|
|
|
|
csi_reg_write(mx3_cam, sens_conf | dw, CSI_SENS_CONF);
|
|
|
|
dev_dbg(&ici->dev, "Set SENS_CONF to %x\n", sens_conf | dw);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct soc_camera_host_ops mx3_soc_camera_host_ops = {
|
|
.owner = THIS_MODULE,
|
|
.add = mx3_camera_add_device,
|
|
.remove = mx3_camera_remove_device,
|
|
#ifdef CONFIG_PM
|
|
.suspend = mx3_camera_suspend,
|
|
.resume = mx3_camera_resume,
|
|
#endif
|
|
.set_fmt = mx3_camera_set_fmt,
|
|
.try_fmt = mx3_camera_try_fmt,
|
|
.get_formats = mx3_camera_get_formats,
|
|
.init_videobuf = mx3_camera_init_videobuf,
|
|
.reqbufs = mx3_camera_reqbufs,
|
|
.poll = mx3_camera_poll,
|
|
.querycap = mx3_camera_querycap,
|
|
.set_bus_param = mx3_camera_set_bus_param,
|
|
};
|
|
|
|
static int mx3_camera_probe(struct platform_device *pdev)
|
|
{
|
|
struct mx3_camera_dev *mx3_cam;
|
|
struct resource *res;
|
|
void __iomem *base;
|
|
int err = 0;
|
|
struct soc_camera_host *soc_host;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
err = -ENODEV;
|
|
goto egetres;
|
|
}
|
|
|
|
mx3_cam = vmalloc(sizeof(*mx3_cam));
|
|
if (!mx3_cam) {
|
|
dev_err(&pdev->dev, "Could not allocate mx3 camera object\n");
|
|
err = -ENOMEM;
|
|
goto ealloc;
|
|
}
|
|
memset(mx3_cam, 0, sizeof(*mx3_cam));
|
|
|
|
mx3_cam->clk = clk_get(&pdev->dev, "csi_clk");
|
|
if (IS_ERR(mx3_cam->clk)) {
|
|
err = PTR_ERR(mx3_cam->clk);
|
|
goto eclkget;
|
|
}
|
|
|
|
dev_set_drvdata(&pdev->dev, mx3_cam);
|
|
|
|
mx3_cam->pdata = pdev->dev.platform_data;
|
|
mx3_cam->platform_flags = mx3_cam->pdata->flags;
|
|
if (!(mx3_cam->platform_flags & (MX3_CAMERA_DATAWIDTH_4 |
|
|
MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10 |
|
|
MX3_CAMERA_DATAWIDTH_15))) {
|
|
/* Platform hasn't set available data widths. This is bad.
|
|
* Warn and use a default. */
|
|
dev_warn(&pdev->dev, "WARNING! Platform hasn't set available "
|
|
"data widths, using default 8 bit\n");
|
|
mx3_cam->platform_flags |= MX3_CAMERA_DATAWIDTH_8;
|
|
}
|
|
|
|
mx3_cam->mclk = mx3_cam->pdata->mclk_10khz * 10000;
|
|
if (!mx3_cam->mclk) {
|
|
dev_warn(&pdev->dev,
|
|
"mclk_10khz == 0! Please, fix your platform data. "
|
|
"Using default 20MHz\n");
|
|
mx3_cam->mclk = 20000000;
|
|
}
|
|
|
|
/* list of video-buffers */
|
|
INIT_LIST_HEAD(&mx3_cam->capture);
|
|
spin_lock_init(&mx3_cam->lock);
|
|
|
|
base = ioremap(res->start, res->end - res->start + 1);
|
|
if (!base) {
|
|
err = -ENOMEM;
|
|
goto eioremap;
|
|
}
|
|
|
|
mx3_cam->base = base;
|
|
mx3_cam->dev = &pdev->dev;
|
|
|
|
soc_host = &mx3_cam->soc_host;
|
|
soc_host->drv_name = MX3_CAM_DRV_NAME;
|
|
soc_host->ops = &mx3_soc_camera_host_ops;
|
|
soc_host->priv = mx3_cam;
|
|
soc_host->dev.parent = &pdev->dev;
|
|
soc_host->nr = pdev->id;
|
|
err = soc_camera_host_register(soc_host);
|
|
if (err)
|
|
goto ecamhostreg;
|
|
|
|
/* IDMAC interface */
|
|
dmaengine_get();
|
|
|
|
return 0;
|
|
|
|
ecamhostreg:
|
|
iounmap(base);
|
|
eioremap:
|
|
clk_put(mx3_cam->clk);
|
|
eclkget:
|
|
vfree(mx3_cam);
|
|
ealloc:
|
|
egetres:
|
|
return err;
|
|
}
|
|
|
|
static int __devexit mx3_camera_remove(struct platform_device *pdev)
|
|
{
|
|
struct mx3_camera_dev *mx3_cam = platform_get_drvdata(pdev);
|
|
|
|
clk_put(mx3_cam->clk);
|
|
|
|
soc_camera_host_unregister(&mx3_cam->soc_host);
|
|
|
|
iounmap(mx3_cam->base);
|
|
|
|
/*
|
|
* The channel has either not been allocated,
|
|
* or should have been released
|
|
*/
|
|
if (WARN_ON(mx3_cam->idmac_channel[0]))
|
|
dma_release_channel(&mx3_cam->idmac_channel[0]->dma_chan);
|
|
|
|
vfree(mx3_cam);
|
|
|
|
dmaengine_put();
|
|
|
|
dev_info(&pdev->dev, "i.MX3x Camera driver unloaded\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver mx3_camera_driver = {
|
|
.driver = {
|
|
.name = MX3_CAM_DRV_NAME,
|
|
},
|
|
.probe = mx3_camera_probe,
|
|
.remove = __exit_p(mx3_camera_remove),
|
|
};
|
|
|
|
|
|
static int __devinit mx3_camera_init(void)
|
|
{
|
|
return platform_driver_register(&mx3_camera_driver);
|
|
}
|
|
|
|
static void __exit mx3_camera_exit(void)
|
|
{
|
|
platform_driver_unregister(&mx3_camera_driver);
|
|
}
|
|
|
|
module_init(mx3_camera_init);
|
|
module_exit(mx3_camera_exit);
|
|
|
|
MODULE_DESCRIPTION("i.MX3x SoC Camera Host driver");
|
|
MODULE_AUTHOR("Guennadi Liakhovetski <lg@denx.de>");
|
|
MODULE_LICENSE("GPL v2");
|