linux/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
Michael S. Tsirkin 839fcaba35 IPoIB: Connected mode experimental support
The following patch adds experimental support for IPoIB connected
mode, as defined by the draft from the IETF ipoib working group.  The
idea is to increase performance by increasing the MTU from the maximum
of 2K (theoretically 4K) supported by IPoIB on top of UD.  With this
code, I'm able to get 800MByte/sec or more with netperf without
options on a Mellanox 4x back-to-back DDR system.

Some notes on code:
1. SRQ is used for scalability to large cluster sizes
2. Only RC connections are used (UC does not support SRQ now)
3. Retry count is set to 0 since spec draft warns against retries
4. Each connection is used for data transfers in only 1 direction, so
   each connection is either active(TX) or passive (RX).  2 sides that
   want to communicate create 2 connections.
5. Each active (TX) connection has a separate CQ for send completions -
   this keeps the code simple without CQ resize and other tricks
6. To detect stale passive side connections (where the remote side is
   down), we keep an LRU list of passive connections (updated once per
   second per connection) and destroy a connection after it has been
   unused for several seconds. The LRU rule makes it possible to avoid
   scanning connections that have recently been active.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10 08:00:48 -08:00

173 lines
4.4 KiB
C

/*
* Copyright (c) 2004 Topspin Communications. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* $Id: ipoib_vlan.c 1349 2004-12-16 21:09:43Z roland $
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/seq_file.h>
#include <asm/uaccess.h>
#include "ipoib.h"
static ssize_t show_parent(struct device *d, struct device_attribute *attr,
char *buf)
{
struct net_device *dev = to_net_dev(d);
struct ipoib_dev_priv *priv = netdev_priv(dev);
return sprintf(buf, "%s\n", priv->parent->name);
}
static DEVICE_ATTR(parent, S_IRUGO, show_parent, NULL);
int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey)
{
struct ipoib_dev_priv *ppriv, *priv;
char intf_name[IFNAMSIZ];
int result;
if (!capable(CAP_NET_ADMIN))
return -EPERM;
ppriv = netdev_priv(pdev);
mutex_lock(&ppriv->vlan_mutex);
/*
* First ensure this isn't a duplicate. We check the parent device and
* then all of the child interfaces to make sure the Pkey doesn't match.
*/
if (ppriv->pkey == pkey) {
result = -ENOTUNIQ;
goto err;
}
list_for_each_entry(priv, &ppriv->child_intfs, list) {
if (priv->pkey == pkey) {
result = -ENOTUNIQ;
goto err;
}
}
snprintf(intf_name, sizeof intf_name, "%s.%04x",
ppriv->dev->name, pkey);
priv = ipoib_intf_alloc(intf_name);
if (!priv) {
result = -ENOMEM;
goto err;
}
set_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags);
priv->pkey = pkey;
memcpy(priv->dev->dev_addr, ppriv->dev->dev_addr, INFINIBAND_ALEN);
priv->dev->broadcast[8] = pkey >> 8;
priv->dev->broadcast[9] = pkey & 0xff;
result = ipoib_dev_init(priv->dev, ppriv->ca, ppriv->port);
if (result < 0) {
ipoib_warn(ppriv, "failed to initialize subinterface: "
"device %s, port %d",
ppriv->ca->name, ppriv->port);
goto device_init_failed;
}
result = register_netdev(priv->dev);
if (result) {
ipoib_warn(priv, "failed to initialize; error %i", result);
goto register_failed;
}
priv->parent = ppriv->dev;
ipoib_create_debug_files(priv->dev);
if (ipoib_cm_add_mode_attr(priv->dev))
goto sysfs_failed;
if (ipoib_add_pkey_attr(priv->dev))
goto sysfs_failed;
if (device_create_file(&priv->dev->dev, &dev_attr_parent))
goto sysfs_failed;
list_add_tail(&priv->list, &ppriv->child_intfs);
mutex_unlock(&ppriv->vlan_mutex);
return 0;
sysfs_failed:
ipoib_delete_debug_files(priv->dev);
unregister_netdev(priv->dev);
register_failed:
ipoib_dev_cleanup(priv->dev);
device_init_failed:
free_netdev(priv->dev);
err:
mutex_unlock(&ppriv->vlan_mutex);
return result;
}
int ipoib_vlan_delete(struct net_device *pdev, unsigned short pkey)
{
struct ipoib_dev_priv *ppriv, *priv, *tpriv;
int ret = -ENOENT;
if (!capable(CAP_NET_ADMIN))
return -EPERM;
ppriv = netdev_priv(pdev);
mutex_lock(&ppriv->vlan_mutex);
list_for_each_entry_safe(priv, tpriv, &ppriv->child_intfs, list) {
if (priv->pkey == pkey) {
unregister_netdev(priv->dev);
ipoib_dev_cleanup(priv->dev);
list_del(&priv->list);
free_netdev(priv->dev);
ret = 0;
break;
}
}
mutex_unlock(&ppriv->vlan_mutex);
return ret;
}