mirror of
https://github.com/torvalds/linux.git
synced 2024-12-14 23:25:54 +00:00
2d65a9f48f
Pull drm updates from Dave Airlie: "This is the main git pull for the drm, I pretty much froze major pulls at -rc5/6 time, and haven't had much fallout, so will probably continue doing that. Lots of changes all over, big internal header cleanup to make it clear drm features are legacy things and what are things that modern KMS drivers should be using. Also big move to use the new generic fences in all the TTM drivers. core: atomic prep work, vblank rework changes, allows immediate vblank disables major header reworking and cleanups to better delinate legacy interfaces from what KMS drivers should be using. cursor planes locking fixes ttm: move to generic fences (affects all TTM drivers) ppc64 caching fixes radeon: userptr support, uvd for old asics, reset rework for fence changes better buffer placement changes, dpm feature enablement hdmi audio support fixes intel: Cherryview work, 180 degree rotation, skylake prep work, execlist command submission full ppgtt prep work cursor improvements edid caching, vdd handling improvements nouveau: fence reworking kepler memory clock work gt21x clock work fan control improvements hdmi infoframe fixes DP audio ast: ppc64 fixes caching fix rcar: rcar-du DT support ipuv3: prep work for capture support msm: LVDS support for mdp4, new panel, gpu refactoring exynos: exynos3250 SoC support, drop bad mmap interface, mipi dsi changes, and component match support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (640 commits) drm/mst: rework payload table allocation to conform better. drm/ast: Fix HW cursor image drm/radeon/kv: add uvd/vce info to dpm debugfs output drm/radeon/ci: add uvd/vce info to dpm debugfs output drm/radeon: export reservation_object from dmabuf to ttm drm/radeon: cope with foreign fences inside the reservation object drm/radeon: cope with foreign fences inside display drm/core: use helper to check driver features drm/radeon/cik: write gfx ucode version to ucode addr reg drm/radeon/si: print full CS when we hit a packet 0 drm/radeon: remove unecessary includes drm/radeon/combios: declare legacy_connector_convert as static drm/radeon/atombios: declare connector convert tables as static drm/radeon: drop btc_get_max_clock_from_voltage_dependency_table drm/radeon/dpm: drop clk/voltage dependency filters for BTC drm/radeon/dpm: drop clk/voltage dependency filters for CI drm/radeon/dpm: drop clk/voltage dependency filters for SI drm/radeon/dpm: drop clk/voltage dependency filters for NI drm/radeon: disable audio when we disable hdmi (v2) drm/radeon: split audio enable between eg and r600 (v2) ...
890 lines
24 KiB
C
890 lines
24 KiB
C
/*
|
|
* Lager board support
|
|
*
|
|
* Copyright (C) 2013-2014 Renesas Solutions Corp.
|
|
* Copyright (C) 2013 Magnus Damm
|
|
* Copyright (C) 2014 Cogent Embedded, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/input.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/mfd/tmio.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/sh_mmcif.h>
|
|
#include <linux/mmc/sh_mobile_sdhi.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/pinctrl/machine.h>
|
|
#include <linux/platform_data/camera-rcar.h>
|
|
#include <linux/platform_data/gpio-rcar.h>
|
|
#include <linux/platform_data/rcar-du.h>
|
|
#include <linux/platform_data/usb-rcar-gen2-phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/regulator/gpio-regulator.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/sh_eth.h>
|
|
#include <linux/spi/flash.h>
|
|
#include <linux/spi/rspi.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/usb/phy.h>
|
|
#include <linux/usb/renesas_usbhs.h>
|
|
|
|
#include <media/soc_camera.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <sound/rcar_snd.h>
|
|
#include <sound/simple_card.h>
|
|
|
|
#include "common.h"
|
|
#include "irqs.h"
|
|
#include "r8a7790.h"
|
|
#include "rcar-gen2.h"
|
|
|
|
/*
|
|
* SSI-AK4643
|
|
*
|
|
* SW1: 1: AK4643
|
|
* 2: CN22
|
|
* 3: ADV7511
|
|
*
|
|
* this command is required when playback.
|
|
*
|
|
* # amixer set "LINEOUT Mixer DACL" on
|
|
*/
|
|
|
|
/*
|
|
* SDHI0 (CN8)
|
|
*
|
|
* JP3: pin1
|
|
* SW20: pin1
|
|
|
|
* GP5_24: 1: VDD 3.3V (defult)
|
|
* 0: VDD 0.0V
|
|
* GP5_29: 1: VccQ 3.3V (defult)
|
|
* 0: VccQ 1.8V
|
|
*
|
|
*/
|
|
|
|
/* DU */
|
|
static struct rcar_du_encoder_data lager_du_encoders[] = {
|
|
{
|
|
.type = RCAR_DU_ENCODER_VGA,
|
|
.output = RCAR_DU_OUTPUT_DPAD0,
|
|
}, {
|
|
.type = RCAR_DU_ENCODER_NONE,
|
|
.output = RCAR_DU_OUTPUT_LVDS1,
|
|
.connector.lvds.panel = {
|
|
.width_mm = 210,
|
|
.height_mm = 158,
|
|
.mode = {
|
|
.pixelclock = 65000000,
|
|
.hactive = 1024,
|
|
.hfront_porch = 20,
|
|
.hback_porch = 160,
|
|
.hsync_len = 136,
|
|
.vactive = 768,
|
|
.vfront_porch = 3,
|
|
.vback_porch = 29,
|
|
.vsync_len = 6,
|
|
},
|
|
},
|
|
},
|
|
};
|
|
|
|
static const struct rcar_du_platform_data lager_du_pdata __initconst = {
|
|
.encoders = lager_du_encoders,
|
|
.num_encoders = ARRAY_SIZE(lager_du_encoders),
|
|
};
|
|
|
|
static const struct resource du_resources[] __initconst = {
|
|
DEFINE_RES_MEM(0xfeb00000, 0x70000),
|
|
DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
|
|
DEFINE_RES_MEM_NAMED(0xfeb94000, 0x1c, "lvds.1"),
|
|
DEFINE_RES_IRQ(gic_spi(256)),
|
|
DEFINE_RES_IRQ(gic_spi(268)),
|
|
DEFINE_RES_IRQ(gic_spi(269)),
|
|
};
|
|
|
|
static void __init lager_add_du_device(void)
|
|
{
|
|
struct platform_device_info info = {
|
|
.name = "rcar-du-r8a7790",
|
|
.id = -1,
|
|
.res = du_resources,
|
|
.num_res = ARRAY_SIZE(du_resources),
|
|
.data = &lager_du_pdata,
|
|
.size_data = sizeof(lager_du_pdata),
|
|
.dma_mask = DMA_BIT_MASK(32),
|
|
};
|
|
|
|
platform_device_register_full(&info);
|
|
}
|
|
|
|
/* LEDS */
|
|
static struct gpio_led lager_leds[] = {
|
|
{
|
|
.name = "led8",
|
|
.gpio = RCAR_GP_PIN(5, 17),
|
|
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
}, {
|
|
.name = "led7",
|
|
.gpio = RCAR_GP_PIN(4, 23),
|
|
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
}, {
|
|
.name = "led6",
|
|
.gpio = RCAR_GP_PIN(4, 22),
|
|
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
},
|
|
};
|
|
|
|
static const struct gpio_led_platform_data lager_leds_pdata __initconst = {
|
|
.leds = lager_leds,
|
|
.num_leds = ARRAY_SIZE(lager_leds),
|
|
};
|
|
|
|
/* GPIO KEY */
|
|
#define GPIO_KEY(c, g, d, ...) \
|
|
{ .code = c, .gpio = g, .desc = d, .active_low = 1, \
|
|
.wakeup = 1, .debounce_interval = 20 }
|
|
|
|
static struct gpio_keys_button gpio_buttons[] = {
|
|
GPIO_KEY(KEY_4, RCAR_GP_PIN(1, 28), "SW2-pin4"),
|
|
GPIO_KEY(KEY_3, RCAR_GP_PIN(1, 26), "SW2-pin3"),
|
|
GPIO_KEY(KEY_2, RCAR_GP_PIN(1, 24), "SW2-pin2"),
|
|
GPIO_KEY(KEY_1, RCAR_GP_PIN(1, 14), "SW2-pin1"),
|
|
};
|
|
|
|
static const struct gpio_keys_platform_data lager_keys_pdata __initconst = {
|
|
.buttons = gpio_buttons,
|
|
.nbuttons = ARRAY_SIZE(gpio_buttons),
|
|
};
|
|
|
|
/* Fixed 3.3V regulator to be used by MMCIF */
|
|
static struct regulator_consumer_supply fixed3v3_power_consumers[] =
|
|
{
|
|
REGULATOR_SUPPLY("vmmc", "sh_mmcif.1"),
|
|
};
|
|
|
|
/*
|
|
* SDHI regulator macro
|
|
*
|
|
** FIXME**
|
|
* Lager board vqmmc is provided via DA9063 PMIC chip,
|
|
* and we should use ${LINK}/drivers/mfd/da9063-* driver for it.
|
|
* but, it doesn't have regulator support at this point.
|
|
* It uses gpio-regulator for vqmmc as quick-hack.
|
|
*/
|
|
#define SDHI_REGULATOR(idx, vdd_pin, vccq_pin) \
|
|
static struct regulator_consumer_supply vcc_sdhi##idx##_consumer = \
|
|
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi." #idx); \
|
|
\
|
|
static struct regulator_init_data vcc_sdhi##idx##_init_data = { \
|
|
.constraints = { \
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS, \
|
|
}, \
|
|
.consumer_supplies = &vcc_sdhi##idx##_consumer, \
|
|
.num_consumer_supplies = 1, \
|
|
}; \
|
|
\
|
|
static const struct fixed_voltage_config vcc_sdhi##idx##_info __initconst = {\
|
|
.supply_name = "SDHI" #idx "Vcc", \
|
|
.microvolts = 3300000, \
|
|
.gpio = vdd_pin, \
|
|
.enable_high = 1, \
|
|
.init_data = &vcc_sdhi##idx##_init_data, \
|
|
}; \
|
|
\
|
|
static struct regulator_consumer_supply vccq_sdhi##idx##_consumer = \
|
|
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi." #idx); \
|
|
\
|
|
static struct regulator_init_data vccq_sdhi##idx##_init_data = { \
|
|
.constraints = { \
|
|
.input_uV = 3300000, \
|
|
.min_uV = 1800000, \
|
|
.max_uV = 3300000, \
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | \
|
|
REGULATOR_CHANGE_STATUS, \
|
|
}, \
|
|
.consumer_supplies = &vccq_sdhi##idx##_consumer, \
|
|
.num_consumer_supplies = 1, \
|
|
}; \
|
|
\
|
|
static struct gpio vccq_sdhi##idx##_gpio = \
|
|
{ vccq_pin, GPIOF_OUT_INIT_HIGH, "vccq-sdhi" #idx }; \
|
|
\
|
|
static struct gpio_regulator_state vccq_sdhi##idx##_states[] = { \
|
|
{ .value = 1800000, .gpios = 0 }, \
|
|
{ .value = 3300000, .gpios = 1 }, \
|
|
}; \
|
|
\
|
|
static const struct gpio_regulator_config vccq_sdhi##idx##_info __initconst = {\
|
|
.supply_name = "vqmmc", \
|
|
.gpios = &vccq_sdhi##idx##_gpio, \
|
|
.nr_gpios = 1, \
|
|
.states = vccq_sdhi##idx##_states, \
|
|
.nr_states = ARRAY_SIZE(vccq_sdhi##idx##_states), \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.init_data = &vccq_sdhi##idx##_init_data, \
|
|
};
|
|
|
|
SDHI_REGULATOR(0, RCAR_GP_PIN(5, 24), RCAR_GP_PIN(5, 29));
|
|
SDHI_REGULATOR(2, RCAR_GP_PIN(5, 25), RCAR_GP_PIN(5, 30));
|
|
|
|
/* MMCIF */
|
|
static const struct sh_mmcif_plat_data mmcif1_pdata __initconst = {
|
|
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
|
|
.clk_ctrl2_present = true,
|
|
.ccs_unsupported = true,
|
|
};
|
|
|
|
static const struct resource mmcif1_resources[] __initconst = {
|
|
DEFINE_RES_MEM(0xee220000, 0x80),
|
|
DEFINE_RES_IRQ(gic_spi(170)),
|
|
};
|
|
|
|
/* Ether */
|
|
static const struct sh_eth_plat_data ether_pdata __initconst = {
|
|
.phy = 0x1,
|
|
.phy_irq = irq_pin(0),
|
|
.edmac_endian = EDMAC_LITTLE_ENDIAN,
|
|
.phy_interface = PHY_INTERFACE_MODE_RMII,
|
|
.ether_link_active_low = 1,
|
|
};
|
|
|
|
static const struct resource ether_resources[] __initconst = {
|
|
DEFINE_RES_MEM(0xee700000, 0x400),
|
|
DEFINE_RES_IRQ(gic_spi(162)),
|
|
};
|
|
|
|
static const struct platform_device_info ether_info __initconst = {
|
|
.name = "r8a7790-ether",
|
|
.id = -1,
|
|
.res = ether_resources,
|
|
.num_res = ARRAY_SIZE(ether_resources),
|
|
.data = ðer_pdata,
|
|
.size_data = sizeof(ether_pdata),
|
|
.dma_mask = DMA_BIT_MASK(32),
|
|
};
|
|
|
|
/* SPI Flash memory (Spansion S25FL512SAGMFIG11 64Mb) */
|
|
static struct mtd_partition spi_flash_part[] = {
|
|
/* Reserved for user loader program, read-only */
|
|
{
|
|
.name = "loader",
|
|
.offset = 0,
|
|
.size = SZ_256K,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
/* Reserved for user program, read-only */
|
|
{
|
|
.name = "user",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_4M,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
/* All else is writable (e.g. JFFS2) */
|
|
{
|
|
.name = "flash",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
.mask_flags = 0,
|
|
},
|
|
};
|
|
|
|
static const struct flash_platform_data spi_flash_data = {
|
|
.name = "m25p80",
|
|
.parts = spi_flash_part,
|
|
.nr_parts = ARRAY_SIZE(spi_flash_part),
|
|
.type = "s25fl512s",
|
|
};
|
|
|
|
static const struct rspi_plat_data qspi_pdata __initconst = {
|
|
.num_chipselect = 1,
|
|
};
|
|
|
|
static const struct spi_board_info spi_info[] __initconst = {
|
|
{
|
|
.modalias = "m25p80",
|
|
.platform_data = &spi_flash_data,
|
|
.mode = SPI_MODE_0 | SPI_TX_QUAD | SPI_RX_QUAD,
|
|
.max_speed_hz = 30000000,
|
|
.bus_num = 0,
|
|
.chip_select = 0,
|
|
},
|
|
};
|
|
|
|
/* QSPI resource */
|
|
static const struct resource qspi_resources[] __initconst = {
|
|
DEFINE_RES_MEM(0xe6b10000, 0x1000),
|
|
DEFINE_RES_IRQ_NAMED(gic_spi(184), "mux"),
|
|
};
|
|
|
|
/* VIN */
|
|
static const struct resource vin_resources[] __initconst = {
|
|
/* VIN0 */
|
|
DEFINE_RES_MEM(0xe6ef0000, 0x1000),
|
|
DEFINE_RES_IRQ(gic_spi(188)),
|
|
/* VIN1 */
|
|
DEFINE_RES_MEM(0xe6ef1000, 0x1000),
|
|
DEFINE_RES_IRQ(gic_spi(189)),
|
|
};
|
|
|
|
static void __init lager_add_vin_device(unsigned idx,
|
|
struct rcar_vin_platform_data *pdata)
|
|
{
|
|
struct platform_device_info vin_info = {
|
|
.name = "r8a7790-vin",
|
|
.id = idx,
|
|
.res = &vin_resources[idx * 2],
|
|
.num_res = 2,
|
|
.dma_mask = DMA_BIT_MASK(32),
|
|
.data = pdata,
|
|
.size_data = sizeof(*pdata),
|
|
};
|
|
|
|
BUG_ON(idx > 1);
|
|
|
|
platform_device_register_full(&vin_info);
|
|
}
|
|
|
|
#define LAGER_CAMERA(idx, name, addr, pdata, flag) \
|
|
static struct i2c_board_info i2c_cam##idx##_device = { \
|
|
I2C_BOARD_INFO(name, addr), \
|
|
}; \
|
|
\
|
|
static struct rcar_vin_platform_data vin##idx##_pdata = { \
|
|
.flags = flag, \
|
|
}; \
|
|
\
|
|
static struct soc_camera_link cam##idx##_link = { \
|
|
.bus_id = idx, \
|
|
.board_info = &i2c_cam##idx##_device, \
|
|
.i2c_adapter_id = 2, \
|
|
.module_name = name, \
|
|
.priv = pdata, \
|
|
}
|
|
|
|
/* Camera 0 is not currently supported due to adv7612 support missing */
|
|
LAGER_CAMERA(1, "adv7180", 0x20, NULL, RCAR_VIN_BT656);
|
|
|
|
static void __init lager_add_camera1_device(void)
|
|
{
|
|
platform_device_register_data(NULL, "soc-camera-pdrv", 1,
|
|
&cam1_link, sizeof(cam1_link));
|
|
lager_add_vin_device(1, &vin1_pdata);
|
|
}
|
|
|
|
/* SATA1 */
|
|
static const struct resource sata1_resources[] __initconst = {
|
|
DEFINE_RES_MEM(0xee500000, 0x2000),
|
|
DEFINE_RES_IRQ(gic_spi(106)),
|
|
};
|
|
|
|
static const struct platform_device_info sata1_info __initconst = {
|
|
.name = "sata-r8a7790",
|
|
.id = 1,
|
|
.res = sata1_resources,
|
|
.num_res = ARRAY_SIZE(sata1_resources),
|
|
.dma_mask = DMA_BIT_MASK(32),
|
|
};
|
|
|
|
/* USBHS */
|
|
static const struct resource usbhs_resources[] __initconst = {
|
|
DEFINE_RES_MEM(0xe6590000, 0x100),
|
|
DEFINE_RES_IRQ(gic_spi(107)),
|
|
};
|
|
|
|
struct usbhs_private {
|
|
struct renesas_usbhs_platform_info info;
|
|
struct usb_phy *phy;
|
|
};
|
|
|
|
#define usbhs_get_priv(pdev) \
|
|
container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info)
|
|
|
|
static int usbhs_power_ctrl(struct platform_device *pdev,
|
|
void __iomem *base, int enable)
|
|
{
|
|
struct usbhs_private *priv = usbhs_get_priv(pdev);
|
|
|
|
if (!priv->phy)
|
|
return -ENODEV;
|
|
|
|
if (enable) {
|
|
int retval = usb_phy_init(priv->phy);
|
|
|
|
if (!retval)
|
|
retval = usb_phy_set_suspend(priv->phy, 0);
|
|
return retval;
|
|
}
|
|
|
|
usb_phy_set_suspend(priv->phy, 1);
|
|
usb_phy_shutdown(priv->phy);
|
|
return 0;
|
|
}
|
|
|
|
static int usbhs_hardware_init(struct platform_device *pdev)
|
|
{
|
|
struct usbhs_private *priv = usbhs_get_priv(pdev);
|
|
struct usb_phy *phy;
|
|
int ret;
|
|
|
|
/* USB0 Function - use PWEN as GPIO input to detect DIP Switch SW5
|
|
* setting to avoid VBUS short circuit due to wrong cable.
|
|
* PWEN should be pulled up high if USB Function is selected by SW5
|
|
*/
|
|
gpio_request_one(RCAR_GP_PIN(5, 18), GPIOF_IN, NULL); /* USB0_PWEN */
|
|
if (!gpio_get_value(RCAR_GP_PIN(5, 18))) {
|
|
pr_warn("Error: USB Function not selected - check SW5 + SW6\n");
|
|
ret = -ENOTSUPP;
|
|
goto error;
|
|
}
|
|
|
|
phy = usb_get_phy_dev(&pdev->dev, 0);
|
|
if (IS_ERR(phy)) {
|
|
ret = PTR_ERR(phy);
|
|
goto error;
|
|
}
|
|
|
|
priv->phy = phy;
|
|
return 0;
|
|
error:
|
|
gpio_free(RCAR_GP_PIN(5, 18));
|
|
return ret;
|
|
}
|
|
|
|
static int usbhs_hardware_exit(struct platform_device *pdev)
|
|
{
|
|
struct usbhs_private *priv = usbhs_get_priv(pdev);
|
|
|
|
if (!priv->phy)
|
|
return 0;
|
|
|
|
usb_put_phy(priv->phy);
|
|
priv->phy = NULL;
|
|
|
|
gpio_free(RCAR_GP_PIN(5, 18));
|
|
return 0;
|
|
}
|
|
|
|
static int usbhs_get_id(struct platform_device *pdev)
|
|
{
|
|
return USBHS_GADGET;
|
|
}
|
|
|
|
static u32 lager_usbhs_pipe_type[] = {
|
|
USB_ENDPOINT_XFER_CONTROL,
|
|
USB_ENDPOINT_XFER_ISOC,
|
|
USB_ENDPOINT_XFER_ISOC,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_INT,
|
|
USB_ENDPOINT_XFER_INT,
|
|
USB_ENDPOINT_XFER_INT,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
USB_ENDPOINT_XFER_BULK,
|
|
};
|
|
|
|
static struct usbhs_private usbhs_priv __initdata = {
|
|
.info = {
|
|
.platform_callback = {
|
|
.power_ctrl = usbhs_power_ctrl,
|
|
.hardware_init = usbhs_hardware_init,
|
|
.hardware_exit = usbhs_hardware_exit,
|
|
.get_id = usbhs_get_id,
|
|
},
|
|
.driver_param = {
|
|
.buswait_bwait = 4,
|
|
.pipe_type = lager_usbhs_pipe_type,
|
|
.pipe_size = ARRAY_SIZE(lager_usbhs_pipe_type),
|
|
},
|
|
}
|
|
};
|
|
|
|
static void __init lager_register_usbhs(void)
|
|
{
|
|
usb_bind_phy("renesas_usbhs", 0, "usb_phy_rcar_gen2");
|
|
platform_device_register_resndata(NULL,
|
|
"renesas_usbhs", -1,
|
|
usbhs_resources,
|
|
ARRAY_SIZE(usbhs_resources),
|
|
&usbhs_priv.info,
|
|
sizeof(usbhs_priv.info));
|
|
}
|
|
|
|
/* USBHS PHY */
|
|
static const struct rcar_gen2_phy_platform_data usbhs_phy_pdata __initconst = {
|
|
.chan0_pci = 0, /* Channel 0 is USBHS */
|
|
.chan2_pci = 1, /* Channel 2 is PCI USB */
|
|
};
|
|
|
|
static const struct resource usbhs_phy_resources[] __initconst = {
|
|
DEFINE_RES_MEM(0xe6590100, 0x100),
|
|
};
|
|
|
|
/* I2C */
|
|
static struct i2c_board_info i2c2_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("ak4643", 0x12),
|
|
}
|
|
};
|
|
|
|
/* Sound */
|
|
static struct resource rsnd_resources[] __initdata = {
|
|
[RSND_GEN2_SCU] = DEFINE_RES_MEM(0xec500000, 0x1000),
|
|
[RSND_GEN2_ADG] = DEFINE_RES_MEM(0xec5a0000, 0x100),
|
|
[RSND_GEN2_SSIU] = DEFINE_RES_MEM(0xec540000, 0x1000),
|
|
[RSND_GEN2_SSI] = DEFINE_RES_MEM(0xec541000, 0x1280),
|
|
};
|
|
|
|
static struct rsnd_ssi_platform_info rsnd_ssi[] = {
|
|
RSND_SSI(0, gic_spi(370), 0),
|
|
RSND_SSI(0, gic_spi(371), RSND_SSI_CLK_PIN_SHARE),
|
|
};
|
|
|
|
static struct rsnd_src_platform_info rsnd_src[2] = {
|
|
/* no member at this point */
|
|
};
|
|
|
|
static struct rsnd_dai_platform_info rsnd_dai = {
|
|
.playback = { .ssi = &rsnd_ssi[0], },
|
|
.capture = { .ssi = &rsnd_ssi[1], },
|
|
};
|
|
|
|
static struct rcar_snd_info rsnd_info = {
|
|
.flags = RSND_GEN2,
|
|
.ssi_info = rsnd_ssi,
|
|
.ssi_info_nr = ARRAY_SIZE(rsnd_ssi),
|
|
.src_info = rsnd_src,
|
|
.src_info_nr = ARRAY_SIZE(rsnd_src),
|
|
.dai_info = &rsnd_dai,
|
|
.dai_info_nr = 1,
|
|
};
|
|
|
|
static struct asoc_simple_card_info rsnd_card_info = {
|
|
.name = "AK4643",
|
|
.card = "SSI01-AK4643",
|
|
.codec = "ak4642-codec.2-0012",
|
|
.platform = "rcar_sound",
|
|
.daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
|
|
.cpu_dai = {
|
|
.name = "rcar_sound",
|
|
},
|
|
.codec_dai = {
|
|
.name = "ak4642-hifi",
|
|
.sysclk = 11289600,
|
|
},
|
|
};
|
|
|
|
static void __init lager_add_rsnd_device(void)
|
|
{
|
|
struct platform_device_info cardinfo = {
|
|
.name = "asoc-simple-card",
|
|
.id = -1,
|
|
.data = &rsnd_card_info,
|
|
.size_data = sizeof(struct asoc_simple_card_info),
|
|
.dma_mask = DMA_BIT_MASK(32),
|
|
};
|
|
|
|
i2c_register_board_info(2, i2c2_devices,
|
|
ARRAY_SIZE(i2c2_devices));
|
|
|
|
platform_device_register_resndata(
|
|
NULL, "rcar_sound", -1,
|
|
rsnd_resources, ARRAY_SIZE(rsnd_resources),
|
|
&rsnd_info, sizeof(rsnd_info));
|
|
|
|
platform_device_register_full(&cardinfo);
|
|
}
|
|
|
|
/* SDHI0 */
|
|
static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
|
|
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
|
|
MMC_CAP_POWER_OFF_CARD,
|
|
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
|
|
TMIO_MMC_WRPROTECT_DISABLE,
|
|
};
|
|
|
|
static struct resource sdhi0_resources[] __initdata = {
|
|
DEFINE_RES_MEM(0xee100000, 0x200),
|
|
DEFINE_RES_IRQ(gic_spi(165)),
|
|
};
|
|
|
|
/* SDHI2 */
|
|
static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
|
|
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
|
|
MMC_CAP_POWER_OFF_CARD,
|
|
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
|
|
TMIO_MMC_WRPROTECT_DISABLE,
|
|
};
|
|
|
|
static struct resource sdhi2_resources[] __initdata = {
|
|
DEFINE_RES_MEM(0xee140000, 0x100),
|
|
DEFINE_RES_IRQ(gic_spi(167)),
|
|
};
|
|
|
|
/* Internal PCI1 */
|
|
static const struct resource pci1_resources[] __initconst = {
|
|
DEFINE_RES_MEM(0xee0b0000, 0x10000), /* CFG */
|
|
DEFINE_RES_MEM(0xee0a0000, 0x10000), /* MEM */
|
|
DEFINE_RES_IRQ(gic_spi(112)),
|
|
};
|
|
|
|
static const struct platform_device_info pci1_info __initconst = {
|
|
.name = "pci-rcar-gen2",
|
|
.id = 1,
|
|
.res = pci1_resources,
|
|
.num_res = ARRAY_SIZE(pci1_resources),
|
|
.dma_mask = DMA_BIT_MASK(32),
|
|
};
|
|
|
|
static void __init lager_add_usb1_device(void)
|
|
{
|
|
platform_device_register_full(&pci1_info);
|
|
}
|
|
|
|
/* Internal PCI2 */
|
|
static const struct resource pci2_resources[] __initconst = {
|
|
DEFINE_RES_MEM(0xee0d0000, 0x10000), /* CFG */
|
|
DEFINE_RES_MEM(0xee0c0000, 0x10000), /* MEM */
|
|
DEFINE_RES_IRQ(gic_spi(113)),
|
|
};
|
|
|
|
static const struct platform_device_info pci2_info __initconst = {
|
|
.name = "pci-rcar-gen2",
|
|
.id = 2,
|
|
.res = pci2_resources,
|
|
.num_res = ARRAY_SIZE(pci2_resources),
|
|
.dma_mask = DMA_BIT_MASK(32),
|
|
};
|
|
|
|
static void __init lager_add_usb2_device(void)
|
|
{
|
|
platform_device_register_full(&pci2_info);
|
|
}
|
|
|
|
static const struct pinctrl_map lager_pinctrl_map[] = {
|
|
/* DU (CN10: ARGB0, CN13: LVDS) */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
|
|
"du_rgb666", "du"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
|
|
"du_sync_1", "du"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
|
|
"du_clk_out_0", "du"),
|
|
/* I2C2 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar.2", "pfc-r8a7790",
|
|
"i2c2", "i2c2"),
|
|
/* QSPI */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7790",
|
|
"qspi_ctrl", "qspi"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7790",
|
|
"qspi_data4", "qspi"),
|
|
/* SCIF0 (CN19: DEBUG SERIAL0) */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790",
|
|
"scif0_data", "scif0"),
|
|
/* SCIF1 (CN20: DEBUG SERIAL1) */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7790",
|
|
"scif1_data", "scif1"),
|
|
/* SDHI0 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
|
|
"sdhi0_data4", "sdhi0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
|
|
"sdhi0_ctrl", "sdhi0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
|
|
"sdhi0_cd", "sdhi0"),
|
|
/* SDHI2 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
|
|
"sdhi2_data4", "sdhi2"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
|
|
"sdhi2_ctrl", "sdhi2"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
|
|
"sdhi2_cd", "sdhi2"),
|
|
/* SSI (CN17: sound) */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
|
|
"ssi0129_ctrl", "ssi"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
|
|
"ssi0_data", "ssi"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
|
|
"ssi1_data", "ssi"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
|
|
"audio_clk_a", "audio_clk"),
|
|
/* MMCIF1 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
|
|
"mmc1_data8", "mmc1"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
|
|
"mmc1_ctrl", "mmc1"),
|
|
/* Ether */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
|
|
"eth_link", "eth"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
|
|
"eth_mdio", "eth"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
|
|
"eth_rmii", "eth"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
|
|
"intc_irq0", "intc"),
|
|
/* VIN0 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
|
|
"vin0_data24", "vin0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
|
|
"vin0_sync", "vin0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
|
|
"vin0_field", "vin0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
|
|
"vin0_clkenb", "vin0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
|
|
"vin0_clk", "vin0"),
|
|
/* VIN1 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.1", "pfc-r8a7790",
|
|
"vin1_data8", "vin1"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.1", "pfc-r8a7790",
|
|
"vin1_clk", "vin1"),
|
|
/* USB0 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7790",
|
|
"usb0_ovc_vbus", "usb0"),
|
|
/* USB1 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("pci-rcar-gen2.1", "pfc-r8a7790",
|
|
"usb1", "usb1"),
|
|
/* USB2 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("pci-rcar-gen2.2", "pfc-r8a7790",
|
|
"usb2", "usb2"),
|
|
};
|
|
|
|
static void __init lager_add_standard_devices(void)
|
|
{
|
|
int fixed_regulator_idx = 0;
|
|
int gpio_regulator_idx = 0;
|
|
|
|
r8a7790_clock_init();
|
|
|
|
pinctrl_register_mappings(lager_pinctrl_map,
|
|
ARRAY_SIZE(lager_pinctrl_map));
|
|
r8a7790_pinmux_init();
|
|
|
|
r8a7790_add_standard_devices();
|
|
platform_device_register_data(NULL, "leds-gpio", -1,
|
|
&lager_leds_pdata,
|
|
sizeof(lager_leds_pdata));
|
|
platform_device_register_data(NULL, "gpio-keys", -1,
|
|
&lager_keys_pdata,
|
|
sizeof(lager_keys_pdata));
|
|
regulator_register_always_on(fixed_regulator_idx++,
|
|
"fixed-3.3V", fixed3v3_power_consumers,
|
|
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
|
|
platform_device_register_resndata(NULL, "sh_mmcif", 1,
|
|
mmcif1_resources, ARRAY_SIZE(mmcif1_resources),
|
|
&mmcif1_pdata, sizeof(mmcif1_pdata));
|
|
|
|
platform_device_register_full(ðer_info);
|
|
|
|
lager_add_du_device();
|
|
|
|
platform_device_register_resndata(NULL, "qspi", 0,
|
|
qspi_resources,
|
|
ARRAY_SIZE(qspi_resources),
|
|
&qspi_pdata, sizeof(qspi_pdata));
|
|
spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
|
|
|
|
platform_device_register_data(NULL, "reg-fixed-voltage", fixed_regulator_idx++,
|
|
&vcc_sdhi0_info, sizeof(struct fixed_voltage_config));
|
|
platform_device_register_data(NULL, "reg-fixed-voltage", fixed_regulator_idx++,
|
|
&vcc_sdhi2_info, sizeof(struct fixed_voltage_config));
|
|
|
|
platform_device_register_data(NULL, "gpio-regulator", gpio_regulator_idx++,
|
|
&vccq_sdhi0_info, sizeof(struct gpio_regulator_config));
|
|
platform_device_register_data(NULL, "gpio-regulator", gpio_regulator_idx++,
|
|
&vccq_sdhi2_info, sizeof(struct gpio_regulator_config));
|
|
|
|
lager_add_camera1_device();
|
|
|
|
platform_device_register_full(&sata1_info);
|
|
|
|
platform_device_register_resndata(NULL, "usb_phy_rcar_gen2",
|
|
-1, usbhs_phy_resources,
|
|
ARRAY_SIZE(usbhs_phy_resources),
|
|
&usbhs_phy_pdata,
|
|
sizeof(usbhs_phy_pdata));
|
|
lager_register_usbhs();
|
|
lager_add_usb1_device();
|
|
lager_add_usb2_device();
|
|
|
|
lager_add_rsnd_device();
|
|
|
|
platform_device_register_resndata(NULL, "sh_mobile_sdhi", 0,
|
|
sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
|
|
&sdhi0_info, sizeof(struct sh_mobile_sdhi_info));
|
|
platform_device_register_resndata(NULL, "sh_mobile_sdhi", 2,
|
|
sdhi2_resources, ARRAY_SIZE(sdhi2_resources),
|
|
&sdhi2_info, sizeof(struct sh_mobile_sdhi_info));
|
|
}
|
|
|
|
/*
|
|
* Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds
|
|
* to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits
|
|
* 14-15. We have to set them back to 01 from the default 00 value each time
|
|
* the PHY is reset. It's also important because the PHY's LED0 signal is
|
|
* connected to SoC's ETH_LINK signal and in the PHY's default mode it will
|
|
* bounce on and off after each packet, which we apparently want to avoid.
|
|
*/
|
|
static int lager_ksz8041_fixup(struct phy_device *phydev)
|
|
{
|
|
u16 phyctrl1 = phy_read(phydev, 0x1e);
|
|
|
|
phyctrl1 &= ~0xc000;
|
|
phyctrl1 |= 0x4000;
|
|
return phy_write(phydev, 0x1e, phyctrl1);
|
|
}
|
|
|
|
static void __init lager_init(void)
|
|
{
|
|
lager_add_standard_devices();
|
|
|
|
irq_set_irq_type(irq_pin(0), IRQ_TYPE_LEVEL_LOW);
|
|
|
|
if (IS_ENABLED(CONFIG_PHYLIB))
|
|
phy_register_fixup_for_id("r8a7790-ether-ff:01",
|
|
lager_ksz8041_fixup);
|
|
}
|
|
|
|
static const char * const lager_boards_compat_dt[] __initconst = {
|
|
"renesas,lager",
|
|
NULL,
|
|
};
|
|
|
|
DT_MACHINE_START(LAGER_DT, "lager")
|
|
.smp = smp_ops(r8a7790_smp_ops),
|
|
.init_early = shmobile_init_delay,
|
|
.init_time = rcar_gen2_timer_init,
|
|
.init_machine = lager_init,
|
|
.init_late = shmobile_init_late,
|
|
.reserve = rcar_gen2_reserve,
|
|
.dt_compat = lager_boards_compat_dt,
|
|
MACHINE_END
|