mirror of
https://github.com/torvalds/linux.git
synced 2024-12-02 09:01:34 +00:00
13ff3bdafd
These plls are found in the Tensor gs101 SoC found in the Pixel 6. pll0516x: Integer PLL with high frequency pll0517x: Integer PLL with middle frequency pll0518x: Integer PLL with low frequency PLL0516x FOUT = (MDIV * 2 * FIN)/PDIV * 2^SDIV) PLL0517x and PLL0518x FOUT = (MDIV * FIN)/PDIV*2^SDIV) The PLLs are similar enough to pll_0822x that the same code can handle both. The main difference is the change in the fout formula for the high frequency 0516 pll. Locktime for 516,517 & 518 is 150 the same as the pll_0822x lock factor. MDIV, SDIV PDIV masks and bit shifts are also the same as 0822x. When defining the PLL the "con" parameter should be set to CON3 register, like this PLL(pll_0517x, CLK_FOUT_SHARED0_PLL, "fout_shared0_pll", "oscclk", PLL_LOCKTIME_PLL_SHARED0, PLL_CON3_PLL_SHARED0, NULL), Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Will McVicker <willmcvicker@google.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Link: https://lore.kernel.org/r/20231211162331.435900-8-peter.griffin@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
1428 lines
39 KiB
C
1428 lines
39 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
|
|
* Copyright (c) 2013 Linaro Ltd.
|
|
*
|
|
* This file contains the utility functions to register the pll clocks.
|
|
*/
|
|
|
|
#include <linux/errno.h>
|
|
#include <linux/hrtimer.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/timekeeping.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/io.h>
|
|
#include "clk.h"
|
|
#include "clk-pll.h"
|
|
|
|
#define PLL_TIMEOUT_US 20000U
|
|
#define PLL_TIMEOUT_LOOPS 1000000U
|
|
|
|
struct samsung_clk_pll {
|
|
struct clk_hw hw;
|
|
void __iomem *lock_reg;
|
|
void __iomem *con_reg;
|
|
/* PLL enable control bit offset in @con_reg register */
|
|
unsigned short enable_offs;
|
|
/* PLL lock status bit offset in @con_reg register */
|
|
unsigned short lock_offs;
|
|
enum samsung_pll_type type;
|
|
unsigned int rate_count;
|
|
const struct samsung_pll_rate_table *rate_table;
|
|
};
|
|
|
|
#define to_clk_pll(_hw) container_of(_hw, struct samsung_clk_pll, hw)
|
|
|
|
static const struct samsung_pll_rate_table *samsung_get_pll_settings(
|
|
struct samsung_clk_pll *pll, unsigned long rate)
|
|
{
|
|
const struct samsung_pll_rate_table *rate_table = pll->rate_table;
|
|
int i;
|
|
|
|
for (i = 0; i < pll->rate_count; i++) {
|
|
if (rate == rate_table[i].rate)
|
|
return &rate_table[i];
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static long samsung_pll_round_rate(struct clk_hw *hw,
|
|
unsigned long drate, unsigned long *prate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
const struct samsung_pll_rate_table *rate_table = pll->rate_table;
|
|
int i;
|
|
|
|
/* Assumming rate_table is in descending order */
|
|
for (i = 0; i < pll->rate_count; i++) {
|
|
if (drate >= rate_table[i].rate)
|
|
return rate_table[i].rate;
|
|
}
|
|
|
|
/* return minimum supported value */
|
|
return rate_table[i - 1].rate;
|
|
}
|
|
|
|
static bool pll_early_timeout = true;
|
|
|
|
static int __init samsung_pll_disable_early_timeout(void)
|
|
{
|
|
pll_early_timeout = false;
|
|
return 0;
|
|
}
|
|
arch_initcall(samsung_pll_disable_early_timeout);
|
|
|
|
/* Wait until the PLL is locked */
|
|
static int samsung_pll_lock_wait(struct samsung_clk_pll *pll,
|
|
unsigned int reg_mask)
|
|
{
|
|
int i, ret;
|
|
u32 val;
|
|
|
|
/*
|
|
* This function might be called when the timekeeping API can't be used
|
|
* to detect timeouts. One situation is when the clocksource is not yet
|
|
* initialized, another when the timekeeping is suspended. udelay() also
|
|
* cannot be used when the clocksource is not running on arm64, since
|
|
* the current timer is used as cycle counter. So a simple busy loop
|
|
* is used here in that special cases. The limit of iterations has been
|
|
* derived from experimental measurements of various PLLs on multiple
|
|
* Exynos SoC variants. Single register read time was usually in range
|
|
* 0.4...1.5 us, never less than 0.4 us.
|
|
*/
|
|
if (pll_early_timeout || timekeeping_suspended) {
|
|
i = PLL_TIMEOUT_LOOPS;
|
|
while (i-- > 0) {
|
|
if (readl_relaxed(pll->con_reg) & reg_mask)
|
|
return 0;
|
|
|
|
cpu_relax();
|
|
}
|
|
ret = -ETIMEDOUT;
|
|
} else {
|
|
ret = readl_relaxed_poll_timeout_atomic(pll->con_reg, val,
|
|
val & reg_mask, 0, PLL_TIMEOUT_US);
|
|
}
|
|
|
|
if (ret < 0)
|
|
pr_err("Could not lock PLL %s\n", clk_hw_get_name(&pll->hw));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int samsung_pll3xxx_enable(struct clk_hw *hw)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 tmp;
|
|
|
|
tmp = readl_relaxed(pll->con_reg);
|
|
tmp |= BIT(pll->enable_offs);
|
|
writel_relaxed(tmp, pll->con_reg);
|
|
|
|
return samsung_pll_lock_wait(pll, BIT(pll->lock_offs));
|
|
}
|
|
|
|
static void samsung_pll3xxx_disable(struct clk_hw *hw)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 tmp;
|
|
|
|
tmp = readl_relaxed(pll->con_reg);
|
|
tmp &= ~BIT(pll->enable_offs);
|
|
writel_relaxed(tmp, pll->con_reg);
|
|
}
|
|
|
|
/*
|
|
* PLL2126 Clock Type
|
|
*/
|
|
|
|
#define PLL2126_MDIV_MASK (0xff)
|
|
#define PLL2126_PDIV_MASK (0x3f)
|
|
#define PLL2126_SDIV_MASK (0x3)
|
|
#define PLL2126_MDIV_SHIFT (16)
|
|
#define PLL2126_PDIV_SHIFT (8)
|
|
#define PLL2126_SDIV_SHIFT (0)
|
|
|
|
static unsigned long samsung_pll2126_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 pll_con, mdiv, pdiv, sdiv;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con = readl_relaxed(pll->con_reg);
|
|
mdiv = (pll_con >> PLL2126_MDIV_SHIFT) & PLL2126_MDIV_MASK;
|
|
pdiv = (pll_con >> PLL2126_PDIV_SHIFT) & PLL2126_PDIV_MASK;
|
|
sdiv = (pll_con >> PLL2126_SDIV_SHIFT) & PLL2126_SDIV_MASK;
|
|
|
|
fvco *= (mdiv + 8);
|
|
do_div(fvco, (pdiv + 2) << sdiv);
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll2126_clk_ops = {
|
|
.recalc_rate = samsung_pll2126_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL3000 Clock Type
|
|
*/
|
|
|
|
#define PLL3000_MDIV_MASK (0xff)
|
|
#define PLL3000_PDIV_MASK (0x3)
|
|
#define PLL3000_SDIV_MASK (0x3)
|
|
#define PLL3000_MDIV_SHIFT (16)
|
|
#define PLL3000_PDIV_SHIFT (8)
|
|
#define PLL3000_SDIV_SHIFT (0)
|
|
|
|
static unsigned long samsung_pll3000_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 pll_con, mdiv, pdiv, sdiv;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con = readl_relaxed(pll->con_reg);
|
|
mdiv = (pll_con >> PLL3000_MDIV_SHIFT) & PLL3000_MDIV_MASK;
|
|
pdiv = (pll_con >> PLL3000_PDIV_SHIFT) & PLL3000_PDIV_MASK;
|
|
sdiv = (pll_con >> PLL3000_SDIV_SHIFT) & PLL3000_SDIV_MASK;
|
|
|
|
fvco *= (2 * (mdiv + 8));
|
|
do_div(fvco, pdiv << sdiv);
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll3000_clk_ops = {
|
|
.recalc_rate = samsung_pll3000_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL35xx Clock Type
|
|
*/
|
|
/* Maximum lock time can be 270 * PDIV cycles */
|
|
#define PLL35XX_LOCK_FACTOR (270)
|
|
|
|
#define PLL35XX_MDIV_MASK (0x3FF)
|
|
#define PLL35XX_PDIV_MASK (0x3F)
|
|
#define PLL35XX_SDIV_MASK (0x7)
|
|
#define PLL35XX_MDIV_SHIFT (16)
|
|
#define PLL35XX_PDIV_SHIFT (8)
|
|
#define PLL35XX_SDIV_SHIFT (0)
|
|
#define PLL35XX_LOCK_STAT_SHIFT (29)
|
|
#define PLL35XX_ENABLE_SHIFT (31)
|
|
|
|
static unsigned long samsung_pll35xx_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 mdiv, pdiv, sdiv, pll_con;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con = readl_relaxed(pll->con_reg);
|
|
mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
|
|
pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
|
|
sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK;
|
|
|
|
fvco *= mdiv;
|
|
do_div(fvco, (pdiv << sdiv));
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static inline bool samsung_pll35xx_mp_change(
|
|
const struct samsung_pll_rate_table *rate, u32 pll_con)
|
|
{
|
|
u32 old_mdiv, old_pdiv;
|
|
|
|
old_mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
|
|
old_pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
|
|
|
|
return (rate->mdiv != old_mdiv || rate->pdiv != old_pdiv);
|
|
}
|
|
|
|
static int samsung_pll35xx_set_rate(struct clk_hw *hw, unsigned long drate,
|
|
unsigned long prate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
const struct samsung_pll_rate_table *rate;
|
|
u32 tmp;
|
|
|
|
/* Get required rate settings from table */
|
|
rate = samsung_get_pll_settings(pll, drate);
|
|
if (!rate) {
|
|
pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
|
|
drate, clk_hw_get_name(hw));
|
|
return -EINVAL;
|
|
}
|
|
|
|
tmp = readl_relaxed(pll->con_reg);
|
|
|
|
if (!(samsung_pll35xx_mp_change(rate, tmp))) {
|
|
/* If only s change, change just s value only*/
|
|
tmp &= ~(PLL35XX_SDIV_MASK << PLL35XX_SDIV_SHIFT);
|
|
tmp |= rate->sdiv << PLL35XX_SDIV_SHIFT;
|
|
writel_relaxed(tmp, pll->con_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set PLL lock time. */
|
|
writel_relaxed(rate->pdiv * PLL35XX_LOCK_FACTOR,
|
|
pll->lock_reg);
|
|
|
|
/* Change PLL PMS values */
|
|
tmp &= ~((PLL35XX_MDIV_MASK << PLL35XX_MDIV_SHIFT) |
|
|
(PLL35XX_PDIV_MASK << PLL35XX_PDIV_SHIFT) |
|
|
(PLL35XX_SDIV_MASK << PLL35XX_SDIV_SHIFT));
|
|
tmp |= (rate->mdiv << PLL35XX_MDIV_SHIFT) |
|
|
(rate->pdiv << PLL35XX_PDIV_SHIFT) |
|
|
(rate->sdiv << PLL35XX_SDIV_SHIFT);
|
|
writel_relaxed(tmp, pll->con_reg);
|
|
|
|
/* Wait for PLL lock if the PLL is enabled */
|
|
if (tmp & BIT(pll->enable_offs))
|
|
return samsung_pll_lock_wait(pll, BIT(pll->lock_offs));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll35xx_clk_ops = {
|
|
.recalc_rate = samsung_pll35xx_recalc_rate,
|
|
.round_rate = samsung_pll_round_rate,
|
|
.set_rate = samsung_pll35xx_set_rate,
|
|
.enable = samsung_pll3xxx_enable,
|
|
.disable = samsung_pll3xxx_disable,
|
|
};
|
|
|
|
static const struct clk_ops samsung_pll35xx_clk_min_ops = {
|
|
.recalc_rate = samsung_pll35xx_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL36xx Clock Type
|
|
*/
|
|
/* Maximum lock time can be 3000 * PDIV cycles */
|
|
#define PLL36XX_LOCK_FACTOR (3000)
|
|
|
|
#define PLL36XX_KDIV_MASK (0xFFFF)
|
|
#define PLL36XX_MDIV_MASK (0x1FF)
|
|
#define PLL36XX_PDIV_MASK (0x3F)
|
|
#define PLL36XX_SDIV_MASK (0x7)
|
|
#define PLL36XX_MDIV_SHIFT (16)
|
|
#define PLL36XX_PDIV_SHIFT (8)
|
|
#define PLL36XX_SDIV_SHIFT (0)
|
|
#define PLL36XX_KDIV_SHIFT (0)
|
|
#define PLL36XX_LOCK_STAT_SHIFT (29)
|
|
#define PLL36XX_ENABLE_SHIFT (31)
|
|
|
|
static unsigned long samsung_pll36xx_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 mdiv, pdiv, sdiv, pll_con0, pll_con1;
|
|
s16 kdiv;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con0 = readl_relaxed(pll->con_reg);
|
|
pll_con1 = readl_relaxed(pll->con_reg + 4);
|
|
mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
|
|
pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
|
|
sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
|
|
kdiv = (s16)(pll_con1 & PLL36XX_KDIV_MASK);
|
|
|
|
fvco *= (mdiv << 16) + kdiv;
|
|
do_div(fvco, (pdiv << sdiv));
|
|
fvco >>= 16;
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static inline bool samsung_pll36xx_mpk_change(
|
|
const struct samsung_pll_rate_table *rate, u32 pll_con0, u32 pll_con1)
|
|
{
|
|
u32 old_mdiv, old_pdiv, old_kdiv;
|
|
|
|
old_mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
|
|
old_pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
|
|
old_kdiv = (pll_con1 >> PLL36XX_KDIV_SHIFT) & PLL36XX_KDIV_MASK;
|
|
|
|
return (rate->mdiv != old_mdiv || rate->pdiv != old_pdiv ||
|
|
rate->kdiv != old_kdiv);
|
|
}
|
|
|
|
static int samsung_pll36xx_set_rate(struct clk_hw *hw, unsigned long drate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 pll_con0, pll_con1;
|
|
const struct samsung_pll_rate_table *rate;
|
|
|
|
rate = samsung_get_pll_settings(pll, drate);
|
|
if (!rate) {
|
|
pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
|
|
drate, clk_hw_get_name(hw));
|
|
return -EINVAL;
|
|
}
|
|
|
|
pll_con0 = readl_relaxed(pll->con_reg);
|
|
pll_con1 = readl_relaxed(pll->con_reg + 4);
|
|
|
|
if (!(samsung_pll36xx_mpk_change(rate, pll_con0, pll_con1))) {
|
|
/* If only s change, change just s value only*/
|
|
pll_con0 &= ~(PLL36XX_SDIV_MASK << PLL36XX_SDIV_SHIFT);
|
|
pll_con0 |= (rate->sdiv << PLL36XX_SDIV_SHIFT);
|
|
writel_relaxed(pll_con0, pll->con_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set PLL lock time. */
|
|
writel_relaxed(rate->pdiv * PLL36XX_LOCK_FACTOR, pll->lock_reg);
|
|
|
|
/* Change PLL PMS values */
|
|
pll_con0 &= ~((PLL36XX_MDIV_MASK << PLL36XX_MDIV_SHIFT) |
|
|
(PLL36XX_PDIV_MASK << PLL36XX_PDIV_SHIFT) |
|
|
(PLL36XX_SDIV_MASK << PLL36XX_SDIV_SHIFT));
|
|
pll_con0 |= (rate->mdiv << PLL36XX_MDIV_SHIFT) |
|
|
(rate->pdiv << PLL36XX_PDIV_SHIFT) |
|
|
(rate->sdiv << PLL36XX_SDIV_SHIFT);
|
|
writel_relaxed(pll_con0, pll->con_reg);
|
|
|
|
pll_con1 &= ~(PLL36XX_KDIV_MASK << PLL36XX_KDIV_SHIFT);
|
|
pll_con1 |= rate->kdiv << PLL36XX_KDIV_SHIFT;
|
|
writel_relaxed(pll_con1, pll->con_reg + 4);
|
|
|
|
if (pll_con0 & BIT(pll->enable_offs))
|
|
return samsung_pll_lock_wait(pll, BIT(pll->lock_offs));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll36xx_clk_ops = {
|
|
.recalc_rate = samsung_pll36xx_recalc_rate,
|
|
.set_rate = samsung_pll36xx_set_rate,
|
|
.round_rate = samsung_pll_round_rate,
|
|
.enable = samsung_pll3xxx_enable,
|
|
.disable = samsung_pll3xxx_disable,
|
|
};
|
|
|
|
static const struct clk_ops samsung_pll36xx_clk_min_ops = {
|
|
.recalc_rate = samsung_pll36xx_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL0822x Clock Type
|
|
*/
|
|
/* Maximum lock time can be 150 * PDIV cycles */
|
|
#define PLL0822X_LOCK_FACTOR (150)
|
|
|
|
#define PLL0822X_MDIV_MASK (0x3FF)
|
|
#define PLL0822X_PDIV_MASK (0x3F)
|
|
#define PLL0822X_SDIV_MASK (0x7)
|
|
#define PLL0822X_MDIV_SHIFT (16)
|
|
#define PLL0822X_PDIV_SHIFT (8)
|
|
#define PLL0822X_SDIV_SHIFT (0)
|
|
#define PLL0822X_LOCK_STAT_SHIFT (29)
|
|
#define PLL0822X_ENABLE_SHIFT (31)
|
|
|
|
static unsigned long samsung_pll0822x_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 mdiv, pdiv, sdiv, pll_con3;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con3 = readl_relaxed(pll->con_reg);
|
|
mdiv = (pll_con3 >> PLL0822X_MDIV_SHIFT) & PLL0822X_MDIV_MASK;
|
|
pdiv = (pll_con3 >> PLL0822X_PDIV_SHIFT) & PLL0822X_PDIV_MASK;
|
|
sdiv = (pll_con3 >> PLL0822X_SDIV_SHIFT) & PLL0822X_SDIV_MASK;
|
|
|
|
fvco *= mdiv;
|
|
if (pll->type == pll_0516x)
|
|
fvco *= 2;
|
|
|
|
do_div(fvco, (pdiv << sdiv));
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static int samsung_pll0822x_set_rate(struct clk_hw *hw, unsigned long drate,
|
|
unsigned long prate)
|
|
{
|
|
const struct samsung_pll_rate_table *rate;
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 pll_con3;
|
|
|
|
/* Get required rate settings from table */
|
|
rate = samsung_get_pll_settings(pll, drate);
|
|
if (!rate) {
|
|
pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
|
|
drate, clk_hw_get_name(hw));
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Change PLL PMS values */
|
|
pll_con3 = readl_relaxed(pll->con_reg);
|
|
pll_con3 &= ~((PLL0822X_MDIV_MASK << PLL0822X_MDIV_SHIFT) |
|
|
(PLL0822X_PDIV_MASK << PLL0822X_PDIV_SHIFT) |
|
|
(PLL0822X_SDIV_MASK << PLL0822X_SDIV_SHIFT));
|
|
pll_con3 |= (rate->mdiv << PLL0822X_MDIV_SHIFT) |
|
|
(rate->pdiv << PLL0822X_PDIV_SHIFT) |
|
|
(rate->sdiv << PLL0822X_SDIV_SHIFT);
|
|
|
|
/* Set PLL lock time */
|
|
writel_relaxed(rate->pdiv * PLL0822X_LOCK_FACTOR,
|
|
pll->lock_reg);
|
|
|
|
/* Write PMS values */
|
|
writel_relaxed(pll_con3, pll->con_reg);
|
|
|
|
/* Wait for PLL lock if the PLL is enabled */
|
|
if (pll_con3 & BIT(pll->enable_offs))
|
|
return samsung_pll_lock_wait(pll, BIT(pll->lock_offs));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll0822x_clk_ops = {
|
|
.recalc_rate = samsung_pll0822x_recalc_rate,
|
|
.round_rate = samsung_pll_round_rate,
|
|
.set_rate = samsung_pll0822x_set_rate,
|
|
.enable = samsung_pll3xxx_enable,
|
|
.disable = samsung_pll3xxx_disable,
|
|
};
|
|
|
|
static const struct clk_ops samsung_pll0822x_clk_min_ops = {
|
|
.recalc_rate = samsung_pll0822x_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL0831x Clock Type
|
|
*/
|
|
/* Maximum lock time can be 500 * PDIV cycles */
|
|
#define PLL0831X_LOCK_FACTOR (500)
|
|
|
|
#define PLL0831X_KDIV_MASK (0xFFFF)
|
|
#define PLL0831X_MDIV_MASK (0x1FF)
|
|
#define PLL0831X_PDIV_MASK (0x3F)
|
|
#define PLL0831X_SDIV_MASK (0x7)
|
|
#define PLL0831X_MDIV_SHIFT (16)
|
|
#define PLL0831X_PDIV_SHIFT (8)
|
|
#define PLL0831X_SDIV_SHIFT (0)
|
|
#define PLL0831X_KDIV_SHIFT (0)
|
|
#define PLL0831X_LOCK_STAT_SHIFT (29)
|
|
#define PLL0831X_ENABLE_SHIFT (31)
|
|
|
|
static unsigned long samsung_pll0831x_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 mdiv, pdiv, sdiv, pll_con3, pll_con5;
|
|
s16 kdiv;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con3 = readl_relaxed(pll->con_reg);
|
|
pll_con5 = readl_relaxed(pll->con_reg + 8);
|
|
mdiv = (pll_con3 >> PLL0831X_MDIV_SHIFT) & PLL0831X_MDIV_MASK;
|
|
pdiv = (pll_con3 >> PLL0831X_PDIV_SHIFT) & PLL0831X_PDIV_MASK;
|
|
sdiv = (pll_con3 >> PLL0831X_SDIV_SHIFT) & PLL0831X_SDIV_MASK;
|
|
kdiv = (s16)((pll_con5 >> PLL0831X_KDIV_SHIFT) & PLL0831X_KDIV_MASK);
|
|
|
|
fvco *= (mdiv << 16) + kdiv;
|
|
do_div(fvco, (pdiv << sdiv));
|
|
fvco >>= 16;
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static int samsung_pll0831x_set_rate(struct clk_hw *hw, unsigned long drate,
|
|
unsigned long parent_rate)
|
|
{
|
|
const struct samsung_pll_rate_table *rate;
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 pll_con3, pll_con5;
|
|
|
|
/* Get required rate settings from table */
|
|
rate = samsung_get_pll_settings(pll, drate);
|
|
if (!rate) {
|
|
pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
|
|
drate, clk_hw_get_name(hw));
|
|
return -EINVAL;
|
|
}
|
|
|
|
pll_con3 = readl_relaxed(pll->con_reg);
|
|
pll_con5 = readl_relaxed(pll->con_reg + 8);
|
|
|
|
/* Change PLL PMSK values */
|
|
pll_con3 &= ~((PLL0831X_MDIV_MASK << PLL0831X_MDIV_SHIFT) |
|
|
(PLL0831X_PDIV_MASK << PLL0831X_PDIV_SHIFT) |
|
|
(PLL0831X_SDIV_MASK << PLL0831X_SDIV_SHIFT));
|
|
pll_con3 |= (rate->mdiv << PLL0831X_MDIV_SHIFT) |
|
|
(rate->pdiv << PLL0831X_PDIV_SHIFT) |
|
|
(rate->sdiv << PLL0831X_SDIV_SHIFT);
|
|
pll_con5 &= ~(PLL0831X_KDIV_MASK << PLL0831X_KDIV_SHIFT);
|
|
/*
|
|
* kdiv is 16-bit 2's complement (s16), but stored as unsigned int.
|
|
* Cast it to u16 to avoid leading 0xffff's in case of negative value.
|
|
*/
|
|
pll_con5 |= ((u16)rate->kdiv << PLL0831X_KDIV_SHIFT);
|
|
|
|
/* Set PLL lock time */
|
|
writel_relaxed(rate->pdiv * PLL0831X_LOCK_FACTOR, pll->lock_reg);
|
|
|
|
/* Write PMSK values */
|
|
writel_relaxed(pll_con3, pll->con_reg);
|
|
writel_relaxed(pll_con5, pll->con_reg + 8);
|
|
|
|
/* Wait for PLL lock if the PLL is enabled */
|
|
if (pll_con3 & BIT(pll->enable_offs))
|
|
return samsung_pll_lock_wait(pll, BIT(pll->lock_offs));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll0831x_clk_ops = {
|
|
.recalc_rate = samsung_pll0831x_recalc_rate,
|
|
.set_rate = samsung_pll0831x_set_rate,
|
|
.round_rate = samsung_pll_round_rate,
|
|
.enable = samsung_pll3xxx_enable,
|
|
.disable = samsung_pll3xxx_disable,
|
|
};
|
|
|
|
static const struct clk_ops samsung_pll0831x_clk_min_ops = {
|
|
.recalc_rate = samsung_pll0831x_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL45xx Clock Type
|
|
*/
|
|
#define PLL4502_LOCK_FACTOR 400
|
|
#define PLL4508_LOCK_FACTOR 240
|
|
|
|
#define PLL45XX_MDIV_MASK (0x3FF)
|
|
#define PLL45XX_PDIV_MASK (0x3F)
|
|
#define PLL45XX_SDIV_MASK (0x7)
|
|
#define PLL45XX_AFC_MASK (0x1F)
|
|
#define PLL45XX_MDIV_SHIFT (16)
|
|
#define PLL45XX_PDIV_SHIFT (8)
|
|
#define PLL45XX_SDIV_SHIFT (0)
|
|
#define PLL45XX_AFC_SHIFT (0)
|
|
|
|
#define PLL45XX_ENABLE BIT(31)
|
|
#define PLL45XX_LOCKED BIT(29)
|
|
|
|
static unsigned long samsung_pll45xx_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 mdiv, pdiv, sdiv, pll_con;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con = readl_relaxed(pll->con_reg);
|
|
mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK;
|
|
pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK;
|
|
sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK;
|
|
|
|
if (pll->type == pll_4508)
|
|
sdiv = sdiv - 1;
|
|
|
|
fvco *= mdiv;
|
|
do_div(fvco, (pdiv << sdiv));
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static bool samsung_pll45xx_mp_change(u32 pll_con0, u32 pll_con1,
|
|
const struct samsung_pll_rate_table *rate)
|
|
{
|
|
u32 old_mdiv, old_pdiv, old_afc;
|
|
|
|
old_mdiv = (pll_con0 >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK;
|
|
old_pdiv = (pll_con0 >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK;
|
|
old_afc = (pll_con1 >> PLL45XX_AFC_SHIFT) & PLL45XX_AFC_MASK;
|
|
|
|
return (old_mdiv != rate->mdiv || old_pdiv != rate->pdiv
|
|
|| old_afc != rate->afc);
|
|
}
|
|
|
|
static int samsung_pll45xx_set_rate(struct clk_hw *hw, unsigned long drate,
|
|
unsigned long prate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
const struct samsung_pll_rate_table *rate;
|
|
u32 con0, con1;
|
|
|
|
/* Get required rate settings from table */
|
|
rate = samsung_get_pll_settings(pll, drate);
|
|
if (!rate) {
|
|
pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
|
|
drate, clk_hw_get_name(hw));
|
|
return -EINVAL;
|
|
}
|
|
|
|
con0 = readl_relaxed(pll->con_reg);
|
|
con1 = readl_relaxed(pll->con_reg + 0x4);
|
|
|
|
if (!(samsung_pll45xx_mp_change(con0, con1, rate))) {
|
|
/* If only s change, change just s value only*/
|
|
con0 &= ~(PLL45XX_SDIV_MASK << PLL45XX_SDIV_SHIFT);
|
|
con0 |= rate->sdiv << PLL45XX_SDIV_SHIFT;
|
|
writel_relaxed(con0, pll->con_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set PLL PMS values. */
|
|
con0 &= ~((PLL45XX_MDIV_MASK << PLL45XX_MDIV_SHIFT) |
|
|
(PLL45XX_PDIV_MASK << PLL45XX_PDIV_SHIFT) |
|
|
(PLL45XX_SDIV_MASK << PLL45XX_SDIV_SHIFT));
|
|
con0 |= (rate->mdiv << PLL45XX_MDIV_SHIFT) |
|
|
(rate->pdiv << PLL45XX_PDIV_SHIFT) |
|
|
(rate->sdiv << PLL45XX_SDIV_SHIFT);
|
|
|
|
/* Set PLL AFC value. */
|
|
con1 = readl_relaxed(pll->con_reg + 0x4);
|
|
con1 &= ~(PLL45XX_AFC_MASK << PLL45XX_AFC_SHIFT);
|
|
con1 |= (rate->afc << PLL45XX_AFC_SHIFT);
|
|
|
|
/* Set PLL lock time. */
|
|
switch (pll->type) {
|
|
case pll_4502:
|
|
writel_relaxed(rate->pdiv * PLL4502_LOCK_FACTOR, pll->lock_reg);
|
|
break;
|
|
case pll_4508:
|
|
writel_relaxed(rate->pdiv * PLL4508_LOCK_FACTOR, pll->lock_reg);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Set new configuration. */
|
|
writel_relaxed(con1, pll->con_reg + 0x4);
|
|
writel_relaxed(con0, pll->con_reg);
|
|
|
|
/* Wait for PLL lock */
|
|
return samsung_pll_lock_wait(pll, PLL45XX_LOCKED);
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll45xx_clk_ops = {
|
|
.recalc_rate = samsung_pll45xx_recalc_rate,
|
|
.round_rate = samsung_pll_round_rate,
|
|
.set_rate = samsung_pll45xx_set_rate,
|
|
};
|
|
|
|
static const struct clk_ops samsung_pll45xx_clk_min_ops = {
|
|
.recalc_rate = samsung_pll45xx_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL46xx Clock Type
|
|
*/
|
|
#define PLL46XX_LOCK_FACTOR 3000
|
|
|
|
#define PLL46XX_VSEL_MASK (1)
|
|
#define PLL46XX_MDIV_MASK (0x1FF)
|
|
#define PLL1460X_MDIV_MASK (0x3FF)
|
|
|
|
#define PLL46XX_PDIV_MASK (0x3F)
|
|
#define PLL46XX_SDIV_MASK (0x7)
|
|
#define PLL46XX_VSEL_SHIFT (27)
|
|
#define PLL46XX_MDIV_SHIFT (16)
|
|
#define PLL46XX_PDIV_SHIFT (8)
|
|
#define PLL46XX_SDIV_SHIFT (0)
|
|
|
|
#define PLL46XX_KDIV_MASK (0xFFFF)
|
|
#define PLL4650C_KDIV_MASK (0xFFF)
|
|
#define PLL46XX_KDIV_SHIFT (0)
|
|
#define PLL46XX_MFR_MASK (0x3F)
|
|
#define PLL46XX_MRR_MASK (0x1F)
|
|
#define PLL46XX_KDIV_SHIFT (0)
|
|
#define PLL46XX_MFR_SHIFT (16)
|
|
#define PLL46XX_MRR_SHIFT (24)
|
|
|
|
#define PLL46XX_ENABLE BIT(31)
|
|
#define PLL46XX_LOCKED BIT(29)
|
|
#define PLL46XX_VSEL BIT(27)
|
|
|
|
static unsigned long samsung_pll46xx_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con1, shift;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con0 = readl_relaxed(pll->con_reg);
|
|
pll_con1 = readl_relaxed(pll->con_reg + 4);
|
|
mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & ((pll->type == pll_1460x) ?
|
|
PLL1460X_MDIV_MASK : PLL46XX_MDIV_MASK);
|
|
pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
|
|
sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
|
|
kdiv = pll->type == pll_4650c ? pll_con1 & PLL4650C_KDIV_MASK :
|
|
pll_con1 & PLL46XX_KDIV_MASK;
|
|
|
|
shift = ((pll->type == pll_4600) || (pll->type == pll_1460x)) ? 16 : 10;
|
|
|
|
fvco *= (mdiv << shift) + kdiv;
|
|
do_div(fvco, (pdiv << sdiv));
|
|
fvco >>= shift;
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static bool samsung_pll46xx_mpk_change(u32 pll_con0, u32 pll_con1,
|
|
const struct samsung_pll_rate_table *rate)
|
|
{
|
|
u32 old_mdiv, old_pdiv, old_kdiv;
|
|
|
|
old_mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
|
|
old_pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
|
|
old_kdiv = (pll_con1 >> PLL46XX_KDIV_SHIFT) & PLL46XX_KDIV_MASK;
|
|
|
|
return (old_mdiv != rate->mdiv || old_pdiv != rate->pdiv
|
|
|| old_kdiv != rate->kdiv);
|
|
}
|
|
|
|
static int samsung_pll46xx_set_rate(struct clk_hw *hw, unsigned long drate,
|
|
unsigned long prate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
const struct samsung_pll_rate_table *rate;
|
|
u32 con0, con1, lock;
|
|
|
|
/* Get required rate settings from table */
|
|
rate = samsung_get_pll_settings(pll, drate);
|
|
if (!rate) {
|
|
pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
|
|
drate, clk_hw_get_name(hw));
|
|
return -EINVAL;
|
|
}
|
|
|
|
con0 = readl_relaxed(pll->con_reg);
|
|
con1 = readl_relaxed(pll->con_reg + 0x4);
|
|
|
|
if (!(samsung_pll46xx_mpk_change(con0, con1, rate))) {
|
|
/* If only s change, change just s value only*/
|
|
con0 &= ~(PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
|
|
con0 |= rate->sdiv << PLL46XX_SDIV_SHIFT;
|
|
writel_relaxed(con0, pll->con_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set PLL lock time. */
|
|
lock = rate->pdiv * PLL46XX_LOCK_FACTOR;
|
|
if (lock > 0xffff)
|
|
/* Maximum lock time bitfield is 16-bit. */
|
|
lock = 0xffff;
|
|
|
|
/* Set PLL PMS and VSEL values. */
|
|
if (pll->type == pll_1460x) {
|
|
con0 &= ~((PLL1460X_MDIV_MASK << PLL46XX_MDIV_SHIFT) |
|
|
(PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT) |
|
|
(PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT));
|
|
} else {
|
|
con0 &= ~((PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT) |
|
|
(PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT) |
|
|
(PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT) |
|
|
(PLL46XX_VSEL_MASK << PLL46XX_VSEL_SHIFT));
|
|
con0 |= rate->vsel << PLL46XX_VSEL_SHIFT;
|
|
}
|
|
|
|
con0 |= (rate->mdiv << PLL46XX_MDIV_SHIFT) |
|
|
(rate->pdiv << PLL46XX_PDIV_SHIFT) |
|
|
(rate->sdiv << PLL46XX_SDIV_SHIFT);
|
|
|
|
/* Set PLL K, MFR and MRR values. */
|
|
con1 = readl_relaxed(pll->con_reg + 0x4);
|
|
con1 &= ~((PLL46XX_KDIV_MASK << PLL46XX_KDIV_SHIFT) |
|
|
(PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT) |
|
|
(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT));
|
|
con1 |= (rate->kdiv << PLL46XX_KDIV_SHIFT) |
|
|
(rate->mfr << PLL46XX_MFR_SHIFT) |
|
|
(rate->mrr << PLL46XX_MRR_SHIFT);
|
|
|
|
/* Write configuration to PLL */
|
|
writel_relaxed(lock, pll->lock_reg);
|
|
writel_relaxed(con0, pll->con_reg);
|
|
writel_relaxed(con1, pll->con_reg + 0x4);
|
|
|
|
/* Wait for PLL lock */
|
|
return samsung_pll_lock_wait(pll, PLL46XX_LOCKED);
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll46xx_clk_ops = {
|
|
.recalc_rate = samsung_pll46xx_recalc_rate,
|
|
.round_rate = samsung_pll_round_rate,
|
|
.set_rate = samsung_pll46xx_set_rate,
|
|
};
|
|
|
|
static const struct clk_ops samsung_pll46xx_clk_min_ops = {
|
|
.recalc_rate = samsung_pll46xx_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL6552 Clock Type
|
|
*/
|
|
|
|
#define PLL6552_MDIV_MASK 0x3ff
|
|
#define PLL6552_PDIV_MASK 0x3f
|
|
#define PLL6552_SDIV_MASK 0x7
|
|
#define PLL6552_MDIV_SHIFT 16
|
|
#define PLL6552_MDIV_SHIFT_2416 14
|
|
#define PLL6552_PDIV_SHIFT 8
|
|
#define PLL6552_PDIV_SHIFT_2416 5
|
|
#define PLL6552_SDIV_SHIFT 0
|
|
|
|
static unsigned long samsung_pll6552_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 mdiv, pdiv, sdiv, pll_con;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con = readl_relaxed(pll->con_reg);
|
|
if (pll->type == pll_6552_s3c2416) {
|
|
mdiv = (pll_con >> PLL6552_MDIV_SHIFT_2416) & PLL6552_MDIV_MASK;
|
|
pdiv = (pll_con >> PLL6552_PDIV_SHIFT_2416) & PLL6552_PDIV_MASK;
|
|
} else {
|
|
mdiv = (pll_con >> PLL6552_MDIV_SHIFT) & PLL6552_MDIV_MASK;
|
|
pdiv = (pll_con >> PLL6552_PDIV_SHIFT) & PLL6552_PDIV_MASK;
|
|
}
|
|
sdiv = (pll_con >> PLL6552_SDIV_SHIFT) & PLL6552_SDIV_MASK;
|
|
|
|
fvco *= mdiv;
|
|
do_div(fvco, (pdiv << sdiv));
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll6552_clk_ops = {
|
|
.recalc_rate = samsung_pll6552_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL6553 Clock Type
|
|
*/
|
|
|
|
#define PLL6553_MDIV_MASK 0xff
|
|
#define PLL6553_PDIV_MASK 0x3f
|
|
#define PLL6553_SDIV_MASK 0x7
|
|
#define PLL6553_KDIV_MASK 0xffff
|
|
#define PLL6553_MDIV_SHIFT 16
|
|
#define PLL6553_PDIV_SHIFT 8
|
|
#define PLL6553_SDIV_SHIFT 0
|
|
#define PLL6553_KDIV_SHIFT 0
|
|
|
|
static unsigned long samsung_pll6553_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con1;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con0 = readl_relaxed(pll->con_reg);
|
|
pll_con1 = readl_relaxed(pll->con_reg + 0x4);
|
|
mdiv = (pll_con0 >> PLL6553_MDIV_SHIFT) & PLL6553_MDIV_MASK;
|
|
pdiv = (pll_con0 >> PLL6553_PDIV_SHIFT) & PLL6553_PDIV_MASK;
|
|
sdiv = (pll_con0 >> PLL6553_SDIV_SHIFT) & PLL6553_SDIV_MASK;
|
|
kdiv = (pll_con1 >> PLL6553_KDIV_SHIFT) & PLL6553_KDIV_MASK;
|
|
|
|
fvco *= (mdiv << 16) + kdiv;
|
|
do_div(fvco, (pdiv << sdiv));
|
|
fvco >>= 16;
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll6553_clk_ops = {
|
|
.recalc_rate = samsung_pll6553_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL2550x Clock Type
|
|
*/
|
|
|
|
#define PLL2550X_R_MASK (0x1)
|
|
#define PLL2550X_P_MASK (0x3F)
|
|
#define PLL2550X_M_MASK (0x3FF)
|
|
#define PLL2550X_S_MASK (0x7)
|
|
#define PLL2550X_R_SHIFT (20)
|
|
#define PLL2550X_P_SHIFT (14)
|
|
#define PLL2550X_M_SHIFT (4)
|
|
#define PLL2550X_S_SHIFT (0)
|
|
|
|
static unsigned long samsung_pll2550x_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 r, p, m, s, pll_stat;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_stat = readl_relaxed(pll->con_reg);
|
|
r = (pll_stat >> PLL2550X_R_SHIFT) & PLL2550X_R_MASK;
|
|
if (!r)
|
|
return 0;
|
|
p = (pll_stat >> PLL2550X_P_SHIFT) & PLL2550X_P_MASK;
|
|
m = (pll_stat >> PLL2550X_M_SHIFT) & PLL2550X_M_MASK;
|
|
s = (pll_stat >> PLL2550X_S_SHIFT) & PLL2550X_S_MASK;
|
|
|
|
fvco *= m;
|
|
do_div(fvco, (p << s));
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll2550x_clk_ops = {
|
|
.recalc_rate = samsung_pll2550x_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL2550xx Clock Type
|
|
*/
|
|
|
|
/* Maximum lock time can be 270 * PDIV cycles */
|
|
#define PLL2550XX_LOCK_FACTOR 270
|
|
|
|
#define PLL2550XX_M_MASK 0x3FF
|
|
#define PLL2550XX_P_MASK 0x3F
|
|
#define PLL2550XX_S_MASK 0x7
|
|
#define PLL2550XX_LOCK_STAT_MASK 0x1
|
|
#define PLL2550XX_M_SHIFT 9
|
|
#define PLL2550XX_P_SHIFT 3
|
|
#define PLL2550XX_S_SHIFT 0
|
|
#define PLL2550XX_LOCK_STAT_SHIFT 21
|
|
|
|
static unsigned long samsung_pll2550xx_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 mdiv, pdiv, sdiv, pll_con;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con = readl_relaxed(pll->con_reg);
|
|
mdiv = (pll_con >> PLL2550XX_M_SHIFT) & PLL2550XX_M_MASK;
|
|
pdiv = (pll_con >> PLL2550XX_P_SHIFT) & PLL2550XX_P_MASK;
|
|
sdiv = (pll_con >> PLL2550XX_S_SHIFT) & PLL2550XX_S_MASK;
|
|
|
|
fvco *= mdiv;
|
|
do_div(fvco, (pdiv << sdiv));
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static inline bool samsung_pll2550xx_mp_change(u32 mdiv, u32 pdiv, u32 pll_con)
|
|
{
|
|
u32 old_mdiv, old_pdiv;
|
|
|
|
old_mdiv = (pll_con >> PLL2550XX_M_SHIFT) & PLL2550XX_M_MASK;
|
|
old_pdiv = (pll_con >> PLL2550XX_P_SHIFT) & PLL2550XX_P_MASK;
|
|
|
|
return mdiv != old_mdiv || pdiv != old_pdiv;
|
|
}
|
|
|
|
static int samsung_pll2550xx_set_rate(struct clk_hw *hw, unsigned long drate,
|
|
unsigned long prate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
const struct samsung_pll_rate_table *rate;
|
|
u32 tmp;
|
|
|
|
/* Get required rate settings from table */
|
|
rate = samsung_get_pll_settings(pll, drate);
|
|
if (!rate) {
|
|
pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
|
|
drate, clk_hw_get_name(hw));
|
|
return -EINVAL;
|
|
}
|
|
|
|
tmp = readl_relaxed(pll->con_reg);
|
|
|
|
if (!(samsung_pll2550xx_mp_change(rate->mdiv, rate->pdiv, tmp))) {
|
|
/* If only s change, change just s value only*/
|
|
tmp &= ~(PLL2550XX_S_MASK << PLL2550XX_S_SHIFT);
|
|
tmp |= rate->sdiv << PLL2550XX_S_SHIFT;
|
|
writel_relaxed(tmp, pll->con_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set PLL lock time. */
|
|
writel_relaxed(rate->pdiv * PLL2550XX_LOCK_FACTOR, pll->lock_reg);
|
|
|
|
/* Change PLL PMS values */
|
|
tmp &= ~((PLL2550XX_M_MASK << PLL2550XX_M_SHIFT) |
|
|
(PLL2550XX_P_MASK << PLL2550XX_P_SHIFT) |
|
|
(PLL2550XX_S_MASK << PLL2550XX_S_SHIFT));
|
|
tmp |= (rate->mdiv << PLL2550XX_M_SHIFT) |
|
|
(rate->pdiv << PLL2550XX_P_SHIFT) |
|
|
(rate->sdiv << PLL2550XX_S_SHIFT);
|
|
writel_relaxed(tmp, pll->con_reg);
|
|
|
|
/* Wait for PLL lock */
|
|
return samsung_pll_lock_wait(pll,
|
|
PLL2550XX_LOCK_STAT_MASK << PLL2550XX_LOCK_STAT_SHIFT);
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll2550xx_clk_ops = {
|
|
.recalc_rate = samsung_pll2550xx_recalc_rate,
|
|
.round_rate = samsung_pll_round_rate,
|
|
.set_rate = samsung_pll2550xx_set_rate,
|
|
};
|
|
|
|
static const struct clk_ops samsung_pll2550xx_clk_min_ops = {
|
|
.recalc_rate = samsung_pll2550xx_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL2650x Clock Type
|
|
*/
|
|
|
|
/* Maximum lock time can be 3000 * PDIV cycles */
|
|
#define PLL2650X_LOCK_FACTOR 3000
|
|
|
|
#define PLL2650X_M_MASK 0x1ff
|
|
#define PLL2650X_P_MASK 0x3f
|
|
#define PLL2650X_S_MASK 0x7
|
|
#define PLL2650X_K_MASK 0xffff
|
|
#define PLL2650X_LOCK_STAT_MASK 0x1
|
|
#define PLL2650X_M_SHIFT 16
|
|
#define PLL2650X_P_SHIFT 8
|
|
#define PLL2650X_S_SHIFT 0
|
|
#define PLL2650X_K_SHIFT 0
|
|
#define PLL2650X_LOCK_STAT_SHIFT 29
|
|
#define PLL2650X_PLL_ENABLE_SHIFT 31
|
|
|
|
static unsigned long samsung_pll2650x_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u64 fout = parent_rate;
|
|
u32 mdiv, pdiv, sdiv, pll_con0, pll_con1;
|
|
s16 kdiv;
|
|
|
|
pll_con0 = readl_relaxed(pll->con_reg);
|
|
mdiv = (pll_con0 >> PLL2650X_M_SHIFT) & PLL2650X_M_MASK;
|
|
pdiv = (pll_con0 >> PLL2650X_P_SHIFT) & PLL2650X_P_MASK;
|
|
sdiv = (pll_con0 >> PLL2650X_S_SHIFT) & PLL2650X_S_MASK;
|
|
|
|
pll_con1 = readl_relaxed(pll->con_reg + 4);
|
|
kdiv = (s16)((pll_con1 >> PLL2650X_K_SHIFT) & PLL2650X_K_MASK);
|
|
|
|
fout *= (mdiv << 16) + kdiv;
|
|
do_div(fout, (pdiv << sdiv));
|
|
fout >>= 16;
|
|
|
|
return (unsigned long)fout;
|
|
}
|
|
|
|
static int samsung_pll2650x_set_rate(struct clk_hw *hw, unsigned long drate,
|
|
unsigned long prate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
const struct samsung_pll_rate_table *rate;
|
|
u32 con0, con1;
|
|
|
|
/* Get required rate settings from table */
|
|
rate = samsung_get_pll_settings(pll, drate);
|
|
if (!rate) {
|
|
pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
|
|
drate, clk_hw_get_name(hw));
|
|
return -EINVAL;
|
|
}
|
|
|
|
con0 = readl_relaxed(pll->con_reg);
|
|
con1 = readl_relaxed(pll->con_reg + 4);
|
|
|
|
/* Set PLL lock time. */
|
|
writel_relaxed(rate->pdiv * PLL2650X_LOCK_FACTOR, pll->lock_reg);
|
|
|
|
/* Change PLL PMS values */
|
|
con0 &= ~((PLL2650X_M_MASK << PLL2650X_M_SHIFT) |
|
|
(PLL2650X_P_MASK << PLL2650X_P_SHIFT) |
|
|
(PLL2650X_S_MASK << PLL2650X_S_SHIFT));
|
|
con0 |= (rate->mdiv << PLL2650X_M_SHIFT) |
|
|
(rate->pdiv << PLL2650X_P_SHIFT) |
|
|
(rate->sdiv << PLL2650X_S_SHIFT);
|
|
con0 |= (1 << PLL2650X_PLL_ENABLE_SHIFT);
|
|
writel_relaxed(con0, pll->con_reg);
|
|
|
|
con1 &= ~(PLL2650X_K_MASK << PLL2650X_K_SHIFT);
|
|
con1 |= ((rate->kdiv & PLL2650X_K_MASK) << PLL2650X_K_SHIFT);
|
|
writel_relaxed(con1, pll->con_reg + 4);
|
|
|
|
/* Wait for PLL lock */
|
|
return samsung_pll_lock_wait(pll,
|
|
PLL2650X_LOCK_STAT_MASK << PLL2650X_LOCK_STAT_SHIFT);
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll2650x_clk_ops = {
|
|
.recalc_rate = samsung_pll2650x_recalc_rate,
|
|
.round_rate = samsung_pll_round_rate,
|
|
.set_rate = samsung_pll2650x_set_rate,
|
|
};
|
|
|
|
static const struct clk_ops samsung_pll2650x_clk_min_ops = {
|
|
.recalc_rate = samsung_pll2650x_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL2650XX Clock Type
|
|
*/
|
|
|
|
/* Maximum lock time can be 3000 * PDIV cycles */
|
|
#define PLL2650XX_LOCK_FACTOR 3000
|
|
|
|
#define PLL2650XX_MDIV_SHIFT 9
|
|
#define PLL2650XX_PDIV_SHIFT 3
|
|
#define PLL2650XX_SDIV_SHIFT 0
|
|
#define PLL2650XX_KDIV_SHIFT 0
|
|
#define PLL2650XX_MDIV_MASK 0x1ff
|
|
#define PLL2650XX_PDIV_MASK 0x3f
|
|
#define PLL2650XX_SDIV_MASK 0x7
|
|
#define PLL2650XX_KDIV_MASK 0xffff
|
|
#define PLL2650XX_PLL_ENABLE_SHIFT 23
|
|
#define PLL2650XX_PLL_LOCKTIME_SHIFT 21
|
|
#define PLL2650XX_PLL_FOUTMASK_SHIFT 31
|
|
|
|
static unsigned long samsung_pll2650xx_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 mdiv, pdiv, sdiv, pll_con0, pll_con2;
|
|
s16 kdiv;
|
|
u64 fvco = parent_rate;
|
|
|
|
pll_con0 = readl_relaxed(pll->con_reg);
|
|
pll_con2 = readl_relaxed(pll->con_reg + 8);
|
|
mdiv = (pll_con0 >> PLL2650XX_MDIV_SHIFT) & PLL2650XX_MDIV_MASK;
|
|
pdiv = (pll_con0 >> PLL2650XX_PDIV_SHIFT) & PLL2650XX_PDIV_MASK;
|
|
sdiv = (pll_con0 >> PLL2650XX_SDIV_SHIFT) & PLL2650XX_SDIV_MASK;
|
|
kdiv = (s16)(pll_con2 & PLL2650XX_KDIV_MASK);
|
|
|
|
fvco *= (mdiv << 16) + kdiv;
|
|
do_div(fvco, (pdiv << sdiv));
|
|
fvco >>= 16;
|
|
|
|
return (unsigned long)fvco;
|
|
}
|
|
|
|
static int samsung_pll2650xx_set_rate(struct clk_hw *hw, unsigned long drate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct samsung_clk_pll *pll = to_clk_pll(hw);
|
|
u32 pll_con0, pll_con2;
|
|
const struct samsung_pll_rate_table *rate;
|
|
|
|
rate = samsung_get_pll_settings(pll, drate);
|
|
if (!rate) {
|
|
pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
|
|
drate, clk_hw_get_name(hw));
|
|
return -EINVAL;
|
|
}
|
|
|
|
pll_con0 = readl_relaxed(pll->con_reg);
|
|
pll_con2 = readl_relaxed(pll->con_reg + 8);
|
|
|
|
/* Change PLL PMS values */
|
|
pll_con0 &= ~(PLL2650XX_MDIV_MASK << PLL2650XX_MDIV_SHIFT |
|
|
PLL2650XX_PDIV_MASK << PLL2650XX_PDIV_SHIFT |
|
|
PLL2650XX_SDIV_MASK << PLL2650XX_SDIV_SHIFT);
|
|
pll_con0 |= rate->mdiv << PLL2650XX_MDIV_SHIFT;
|
|
pll_con0 |= rate->pdiv << PLL2650XX_PDIV_SHIFT;
|
|
pll_con0 |= rate->sdiv << PLL2650XX_SDIV_SHIFT;
|
|
pll_con0 |= 1 << PLL2650XX_PLL_ENABLE_SHIFT;
|
|
pll_con0 |= 1 << PLL2650XX_PLL_FOUTMASK_SHIFT;
|
|
|
|
pll_con2 &= ~(PLL2650XX_KDIV_MASK << PLL2650XX_KDIV_SHIFT);
|
|
pll_con2 |= ((~(rate->kdiv) + 1) & PLL2650XX_KDIV_MASK)
|
|
<< PLL2650XX_KDIV_SHIFT;
|
|
|
|
/* Set PLL lock time. */
|
|
writel_relaxed(PLL2650XX_LOCK_FACTOR * rate->pdiv, pll->lock_reg);
|
|
|
|
writel_relaxed(pll_con0, pll->con_reg);
|
|
writel_relaxed(pll_con2, pll->con_reg + 8);
|
|
|
|
return samsung_pll_lock_wait(pll, 0x1 << PLL2650XX_PLL_LOCKTIME_SHIFT);
|
|
}
|
|
|
|
static const struct clk_ops samsung_pll2650xx_clk_ops = {
|
|
.recalc_rate = samsung_pll2650xx_recalc_rate,
|
|
.set_rate = samsung_pll2650xx_set_rate,
|
|
.round_rate = samsung_pll_round_rate,
|
|
};
|
|
|
|
static const struct clk_ops samsung_pll2650xx_clk_min_ops = {
|
|
.recalc_rate = samsung_pll2650xx_recalc_rate,
|
|
};
|
|
|
|
static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
|
|
const struct samsung_pll_clock *pll_clk)
|
|
{
|
|
struct samsung_clk_pll *pll;
|
|
struct clk_init_data init;
|
|
int ret, len;
|
|
|
|
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
|
|
if (!pll) {
|
|
pr_err("%s: could not allocate pll clk %s\n",
|
|
__func__, pll_clk->name);
|
|
return;
|
|
}
|
|
|
|
init.name = pll_clk->name;
|
|
init.flags = pll_clk->flags;
|
|
init.parent_names = &pll_clk->parent_name;
|
|
init.num_parents = 1;
|
|
|
|
if (pll_clk->rate_table) {
|
|
/* find count of rates in rate_table */
|
|
for (len = 0; pll_clk->rate_table[len].rate != 0; )
|
|
len++;
|
|
|
|
pll->rate_count = len;
|
|
pll->rate_table = kmemdup(pll_clk->rate_table,
|
|
pll->rate_count *
|
|
sizeof(struct samsung_pll_rate_table),
|
|
GFP_KERNEL);
|
|
WARN(!pll->rate_table,
|
|
"%s: could not allocate rate table for %s\n",
|
|
__func__, pll_clk->name);
|
|
}
|
|
|
|
switch (pll_clk->type) {
|
|
case pll_2126:
|
|
init.ops = &samsung_pll2126_clk_ops;
|
|
break;
|
|
case pll_3000:
|
|
init.ops = &samsung_pll3000_clk_ops;
|
|
break;
|
|
/* clk_ops for 35xx and 2550 are similar */
|
|
case pll_35xx:
|
|
case pll_2550:
|
|
case pll_1450x:
|
|
case pll_1451x:
|
|
case pll_1452x:
|
|
case pll_142xx:
|
|
pll->enable_offs = PLL35XX_ENABLE_SHIFT;
|
|
pll->lock_offs = PLL35XX_LOCK_STAT_SHIFT;
|
|
if (!pll->rate_table)
|
|
init.ops = &samsung_pll35xx_clk_min_ops;
|
|
else
|
|
init.ops = &samsung_pll35xx_clk_ops;
|
|
break;
|
|
case pll_1417x:
|
|
case pll_0818x:
|
|
case pll_0822x:
|
|
case pll_0516x:
|
|
case pll_0517x:
|
|
case pll_0518x:
|
|
pll->enable_offs = PLL0822X_ENABLE_SHIFT;
|
|
pll->lock_offs = PLL0822X_LOCK_STAT_SHIFT;
|
|
if (!pll->rate_table)
|
|
init.ops = &samsung_pll0822x_clk_min_ops;
|
|
else
|
|
init.ops = &samsung_pll0822x_clk_ops;
|
|
break;
|
|
case pll_4500:
|
|
init.ops = &samsung_pll45xx_clk_min_ops;
|
|
break;
|
|
case pll_4502:
|
|
case pll_4508:
|
|
if (!pll->rate_table)
|
|
init.ops = &samsung_pll45xx_clk_min_ops;
|
|
else
|
|
init.ops = &samsung_pll45xx_clk_ops;
|
|
break;
|
|
/* clk_ops for 36xx and 2650 are similar */
|
|
case pll_36xx:
|
|
case pll_2650:
|
|
pll->enable_offs = PLL36XX_ENABLE_SHIFT;
|
|
pll->lock_offs = PLL36XX_LOCK_STAT_SHIFT;
|
|
if (!pll->rate_table)
|
|
init.ops = &samsung_pll36xx_clk_min_ops;
|
|
else
|
|
init.ops = &samsung_pll36xx_clk_ops;
|
|
break;
|
|
case pll_0831x:
|
|
pll->enable_offs = PLL0831X_ENABLE_SHIFT;
|
|
pll->lock_offs = PLL0831X_LOCK_STAT_SHIFT;
|
|
if (!pll->rate_table)
|
|
init.ops = &samsung_pll0831x_clk_min_ops;
|
|
else
|
|
init.ops = &samsung_pll0831x_clk_ops;
|
|
break;
|
|
case pll_6552:
|
|
case pll_6552_s3c2416:
|
|
init.ops = &samsung_pll6552_clk_ops;
|
|
break;
|
|
case pll_6553:
|
|
init.ops = &samsung_pll6553_clk_ops;
|
|
break;
|
|
case pll_4600:
|
|
case pll_4650:
|
|
case pll_4650c:
|
|
case pll_1460x:
|
|
if (!pll->rate_table)
|
|
init.ops = &samsung_pll46xx_clk_min_ops;
|
|
else
|
|
init.ops = &samsung_pll46xx_clk_ops;
|
|
break;
|
|
case pll_2550x:
|
|
init.ops = &samsung_pll2550x_clk_ops;
|
|
break;
|
|
case pll_2550xx:
|
|
if (!pll->rate_table)
|
|
init.ops = &samsung_pll2550xx_clk_min_ops;
|
|
else
|
|
init.ops = &samsung_pll2550xx_clk_ops;
|
|
break;
|
|
case pll_2650x:
|
|
if (!pll->rate_table)
|
|
init.ops = &samsung_pll2650x_clk_min_ops;
|
|
else
|
|
init.ops = &samsung_pll2650x_clk_ops;
|
|
break;
|
|
case pll_2650xx:
|
|
if (!pll->rate_table)
|
|
init.ops = &samsung_pll2650xx_clk_min_ops;
|
|
else
|
|
init.ops = &samsung_pll2650xx_clk_ops;
|
|
break;
|
|
default:
|
|
pr_warn("%s: Unknown pll type for pll clk %s\n",
|
|
__func__, pll_clk->name);
|
|
}
|
|
|
|
pll->hw.init = &init;
|
|
pll->type = pll_clk->type;
|
|
pll->lock_reg = ctx->reg_base + pll_clk->lock_offset;
|
|
pll->con_reg = ctx->reg_base + pll_clk->con_offset;
|
|
|
|
ret = clk_hw_register(ctx->dev, &pll->hw);
|
|
if (ret) {
|
|
pr_err("%s: failed to register pll clock %s : %d\n",
|
|
__func__, pll_clk->name, ret);
|
|
kfree(pll->rate_table);
|
|
kfree(pll);
|
|
return;
|
|
}
|
|
|
|
samsung_clk_add_lookup(ctx, &pll->hw, pll_clk->id);
|
|
}
|
|
|
|
void __init samsung_clk_register_pll(struct samsung_clk_provider *ctx,
|
|
const struct samsung_pll_clock *pll_list,
|
|
unsigned int nr_pll)
|
|
{
|
|
int cnt;
|
|
|
|
for (cnt = 0; cnt < nr_pll; cnt++)
|
|
_samsung_clk_register_pll(ctx, &pll_list[cnt]);
|
|
}
|