Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-22 20:22:09 +00:00
Code Issues Packages Projects Releases Wiki Activity
7fa1675e84
linux/arch/sh/boards/board-magicpanelr2.c
Arnd Bergmann ee5a66d87c gpiolib: remove empty asm/gpio.h files 
The arm and sh versions of this file are identical to the generic
versions and can just be removed.

The drivers that actually use the sh3 specific version also include
cpu/gpio.h directly, with the exception of magicpanelr2, which is
easily fixed. This leaves coldfire as the only gpio driver
that needs something custom for gpiolib.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
2023-03-06 12:33:01 +02:00

392 lines
11 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* linux/arch/sh/boards/magicpanel/setup.c
*
* Copyright (C) 2007 Markus Brunner, Mark Jonas
*
* Magic Panel Release 2 board setup
*/
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/map.h>
#include <linux/sh_intc.h>
#include <mach/magicpanelr2.h>
#include <asm/heartbeat.h>
#include <cpu/gpio.h>
#include <cpu/sh7720.h>
/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x"),
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
};
#define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL)
/* Wait until reset finished. Timeout is 100ms. */
static int __init ethernet_reset_finished(void)
{
int i;
if (LAN9115_READY)
return 1;
for (i = 0; i < 10; ++i) {
mdelay(10);
if (LAN9115_READY)
return 1;
}
return 0;
}
static void __init reset_ethernet(void)
{
/* PMDR: LAN_RESET=on */
CLRBITS_OUTB(0x10, PORT_PMDR);
udelay(200);
/* PMDR: LAN_RESET=off */
SETBITS_OUTB(0x10, PORT_PMDR);
}
static void __init setup_chip_select(void)
{
/* CS2: LAN (0x08000000 - 0x0bffffff) */
/* no idle cycles, normal space, 8 bit data bus */
__raw_writel(0x36db0400, CS2BCR);
/* (SW:1.5 WR:3 HW:1.5), ext. wait */
__raw_writel(0x000003c0, CS2WCR);
/* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */
/* no idle cycles, normal space, 8 bit data bus */
__raw_writel(0x00000200, CS4BCR);
/* (SW:1.5 WR:3 HW:1.5), ext. wait */
__raw_writel(0x00100981, CS4WCR);
/* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */
/* no idle cycles, normal space, 8 bit data bus */
__raw_writel(0x00000200, CS5ABCR);
/* (SW:1.5 WR:3 HW:1.5), ext. wait */
__raw_writel(0x00100981, CS5AWCR);
/* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */
/* no idle cycles, normal space, 8 bit data bus */
__raw_writel(0x00000200, CS5BBCR);
/* (SW:1.5 WR:3 HW:1.5), ext. wait */
__raw_writel(0x00100981, CS5BWCR);
/* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */
/* no idle cycles, normal space, 8 bit data bus */
__raw_writel(0x00000200, CS6ABCR);
/* (SW:1.5 WR:3 HW:1.5), no ext. wait */
__raw_writel(0x001009C1, CS6AWCR);
}
static void __init setup_port_multiplexing(void)
{
/* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5);
* A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1);
*/
__raw_writew(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */
/* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1);
* B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0);
*/
__raw_writew(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */
/* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4);
* C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0;
*/
__raw_writew(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */
/* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4);
* D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0);
*/
__raw_writew(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */
/* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP;
* E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM;
*/
__raw_writew(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */
/* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3;
* F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc);
*/
__raw_writew(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */
/* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2);
* G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9);
*/
__raw_writew(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */
/* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE);
* H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR;
*/
__raw_writew(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */
/* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3;
* J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC;
*/
__raw_writew(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */
/* K7 (x); K6 (x); K5 (x); K4 (x);
* K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY)
*/
__raw_writew(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */
/* L7 TRST; L6 TMS; L5 TDO; L4 TDI;
* L3 TCK; L2 (x); L1 (x); L0 (x);
*/
__raw_writew(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */
/* M7 GPO(CURRENT_SINK); M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED);
* M4 GPO(LAN_RESET); M3 GPO(BUZZER); M2 GPO(LCD_BL);
* M1 CS5B(CAN3_CS); M0 GPI+(nc);
*/
__raw_writew(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */
/* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit,
* LAN_RESET=off, BUZZER=off, LCD_BL=off
*/
#if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2
__raw_writeb(0x30, PORT_PMDR);
#elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3
__raw_writeb(0xF0, PORT_PMDR);
#else
#error Unknown revision of PLATFORM_MP_R2
#endif
/* P7 (x); P6 (x); P5 (x);
* P4 GPO(nu); P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ);
* P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ)
*/
__raw_writew(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */
__raw_writeb(0x10, PORT_PPDR);
/* R7 A25; R6 A24; R5 A23; R4 A22;
* R3 A21; R2 A20; R1 A19; R0 A0;
*/
gpio_request(GPIO_FN_A25, NULL);
gpio_request(GPIO_FN_A24, NULL);
gpio_request(GPIO_FN_A23, NULL);
gpio_request(GPIO_FN_A22, NULL);
gpio_request(GPIO_FN_A21, NULL);
gpio_request(GPIO_FN_A20, NULL);
gpio_request(GPIO_FN_A19, NULL);
gpio_request(GPIO_FN_A0, NULL);
/* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2);
* S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK;
*/
__raw_writew(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */
/* T7 (x); T6 (x); T5 (x); T4 COM1_CTS;
* T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG)
*/
__raw_writew(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */
/* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT);
* U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK;
*/
__raw_writew(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */
/* V7 (x); V6 (x); V5 (x); V4 GPO(MID2);
* V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT);
*/
__raw_writew(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */
}
static void __init mpr2_setup(char **cmdline_p)
{
/* set Pin Select Register A:
* /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2,
* /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND
*/
__raw_writew(0xAABC, PORT_PSELA);
/* set Pin Select Register B:
* /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC,
* LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved
*/
__raw_writew(0x3C00, PORT_PSELB);
/* set Pin Select Register C:
* SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved
*/
__raw_writew(0x0000, PORT_PSELC);
/* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK,
* Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved
*/
__raw_writew(0x0000, PORT_PSELD);
/* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */
__raw_writew(0x0101, PORT_UTRCTL);
/* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */
__raw_writew(0xA5C0, PORT_UCLKCR_W);
setup_chip_select();
setup_port_multiplexing();
reset_ethernet();
printk(KERN_INFO "Magic Panel Release 2 A.%i\n",
CONFIG_SH_MAGIC_PANEL_R2_VERSION);
if (ethernet_reset_finished() == 0)
printk(KERN_WARNING "Ethernet not ready\n");
}
static struct resource smsc911x_resources[] = {
[0] = {
.start = 0xa8000000,
.end = 0xabffffff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = evt2irq(0x660),
.end = evt2irq(0x660),
.flags = IORESOURCE_IRQ,
},
};
static struct smsc911x_platform_config smsc911x_config = {
.phy_interface = PHY_INTERFACE_MODE_MII,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
.flags = SMSC911X_USE_32BIT,
};
static struct platform_device smsc911x_device = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(smsc911x_resources),
.resource = smsc911x_resources,
.dev = {
.platform_data = &smsc911x_config,
},
};
static struct resource heartbeat_resources[] = {
[0] = {
.start = PA_LED,
.end = PA_LED,
.flags = IORESOURCE_MEM,
},
};
static struct heartbeat_data heartbeat_data = {
.flags = HEARTBEAT_INVERTED,
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
.dev = {
.platform_data = &heartbeat_data,
},
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
static struct mtd_partition mpr2_partitions[] = {
/* Reserved for bootloader, read-only */
{
.name = "Bootloader",
.offset = 0x00000000UL,
.size = MPR2_MTD_BOOTLOADER_SIZE,
.mask_flags = MTD_WRITEABLE,
},
/* Reserved for kernel image */
{
.name = "Kernel",
.offset = MTDPART_OFS_NXTBLK,
.size = MPR2_MTD_KERNEL_SIZE,
},
/* Rest is used for Flash FS */
{
.name = "Flash_FS",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL,
}
};
static struct physmap_flash_data flash_data = {
.parts = mpr2_partitions,
.nr_parts = ARRAY_SIZE(mpr2_partitions),
.width = 2,
};
static struct resource flash_resource = {
.start = 0x00000000,
.end = 0x2000000UL,
.flags = IORESOURCE_MEM,
};
static struct platform_device flash_device = {
.name = "physmap-flash",
.id = -1,
.resource = &flash_resource,
.num_resources = 1,
.dev = {
.platform_data = &flash_data,
},
};
/*
* Add all resources to the platform_device
*/
static struct platform_device *mpr2_devices[] __initdata = {
&heartbeat_device,
&smsc911x_device,
&flash_device,
};
static int __init mpr2_devices_setup(void)
{
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices));
}
device_initcall(mpr2_devices_setup);
/*
* Initialize IRQ setting
*/
static void __init init_mpr2_IRQ(void)
{
plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-5 */
irq_set_irq_type(evt2irq(0x600), IRQ_TYPE_LEVEL_LOW); /* IRQ0 CAN1 */
irq_set_irq_type(evt2irq(0x620), IRQ_TYPE_LEVEL_LOW); /* IRQ1 CAN2 */
irq_set_irq_type(evt2irq(0x640), IRQ_TYPE_LEVEL_LOW); /* IRQ2 CAN3 */
irq_set_irq_type(evt2irq(0x660), IRQ_TYPE_LEVEL_LOW); /* IRQ3 SMSC9115 */
irq_set_irq_type(evt2irq(0x680), IRQ_TYPE_EDGE_RISING); /* IRQ4 touchscreen */
irq_set_irq_type(evt2irq(0x6a0), IRQ_TYPE_EDGE_FALLING); /* IRQ5 touchscreen */
intc_set_priority(evt2irq(0x600), 13); /* IRQ0 CAN1 */
intc_set_priority(evt2irq(0x620), 13); /* IRQ0 CAN2 */
intc_set_priority(evt2irq(0x640), 13); /* IRQ0 CAN3 */
intc_set_priority(evt2irq(0x660), 6); /* IRQ3 SMSC9115 */
}
/*
* The Machine Vector
*/
static struct sh_machine_vector mv_mpr2 __initmv = {
.mv_name = "mpr2",
.mv_setup = mpr2_setup,
.mv_init_irq = init_mpr2_IRQ,
};
Reference in New Issue View Git Blame Copy Permalink