mirror of
https://github.com/torvalds/linux.git
synced 2024-12-30 14:52:05 +00:00
7f9f40c01c
While waiting for the PHY to report the PCIe link is up, we might hit a situation where the link training is still in progress, while the PHY already reports the link is up. Add additional check for this condition. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Frank Li <lznuaa@gmail.com> Cc: Harro Haan <hrhaan@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Mohit KUMAR <Mohit.KUMAR@st.com> Cc: Pratyush Anand <pratyush.anand@st.com> Cc: Richard Zhu <r65037@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Sean Cross <xobs@kosagi.com> Cc: Siva Reddy Kallam <siva.kallam@samsung.com> Cc: Srikanth T Shivanand <ts.srikanth@samsung.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: Yinghai Lu <yinghai@kernel.org>
562 lines
14 KiB
C
562 lines
14 KiB
C
/*
|
|
* PCIe host controller driver for Freescale i.MX6 SoCs
|
|
*
|
|
* Copyright (C) 2013 Kosagi
|
|
* http://www.kosagi.com
|
|
*
|
|
* Author: Sean Cross <xobs@kosagi.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/resource.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/types.h>
|
|
|
|
#include "pcie-designware.h"
|
|
|
|
#define to_imx6_pcie(x) container_of(x, struct imx6_pcie, pp)
|
|
|
|
struct imx6_pcie {
|
|
int reset_gpio;
|
|
int power_on_gpio;
|
|
int wake_up_gpio;
|
|
int disable_gpio;
|
|
struct clk *lvds_gate;
|
|
struct clk *sata_ref_100m;
|
|
struct clk *pcie_ref_125m;
|
|
struct clk *pcie_axi;
|
|
struct pcie_port pp;
|
|
struct regmap *iomuxc_gpr;
|
|
void __iomem *mem_base;
|
|
};
|
|
|
|
/* PCIe Port Logic registers (memory-mapped) */
|
|
#define PL_OFFSET 0x700
|
|
#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
|
|
#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
|
|
#define PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING (1 << 29)
|
|
#define PCIE_PHY_DEBUG_R1_XMLH_LINK_UP (1 << 4)
|
|
|
|
#define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
|
|
#define PCIE_PHY_CTRL_DATA_LOC 0
|
|
#define PCIE_PHY_CTRL_CAP_ADR_LOC 16
|
|
#define PCIE_PHY_CTRL_CAP_DAT_LOC 17
|
|
#define PCIE_PHY_CTRL_WR_LOC 18
|
|
#define PCIE_PHY_CTRL_RD_LOC 19
|
|
|
|
#define PCIE_PHY_STAT (PL_OFFSET + 0x110)
|
|
#define PCIE_PHY_STAT_ACK_LOC 16
|
|
|
|
/* PHY registers (not memory-mapped) */
|
|
#define PCIE_PHY_RX_ASIC_OUT 0x100D
|
|
|
|
#define PHY_RX_OVRD_IN_LO 0x1005
|
|
#define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5)
|
|
#define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3)
|
|
|
|
static int pcie_phy_poll_ack(void __iomem *dbi_base, int exp_val)
|
|
{
|
|
u32 val;
|
|
u32 max_iterations = 10;
|
|
u32 wait_counter = 0;
|
|
|
|
do {
|
|
val = readl(dbi_base + PCIE_PHY_STAT);
|
|
val = (val >> PCIE_PHY_STAT_ACK_LOC) & 0x1;
|
|
wait_counter++;
|
|
|
|
if (val == exp_val)
|
|
return 0;
|
|
|
|
udelay(1);
|
|
} while (wait_counter < max_iterations);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int pcie_phy_wait_ack(void __iomem *dbi_base, int addr)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
|
|
val = addr << PCIE_PHY_CTRL_DATA_LOC;
|
|
writel(val, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
val |= (0x1 << PCIE_PHY_CTRL_CAP_ADR_LOC);
|
|
writel(val, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
ret = pcie_phy_poll_ack(dbi_base, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val = addr << PCIE_PHY_CTRL_DATA_LOC;
|
|
writel(val, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
ret = pcie_phy_poll_ack(dbi_base, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */
|
|
static int pcie_phy_read(void __iomem *dbi_base, int addr , int *data)
|
|
{
|
|
u32 val, phy_ctl;
|
|
int ret;
|
|
|
|
ret = pcie_phy_wait_ack(dbi_base, addr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* assert Read signal */
|
|
phy_ctl = 0x1 << PCIE_PHY_CTRL_RD_LOC;
|
|
writel(phy_ctl, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
ret = pcie_phy_poll_ack(dbi_base, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val = readl(dbi_base + PCIE_PHY_STAT);
|
|
*data = val & 0xffff;
|
|
|
|
/* deassert Read signal */
|
|
writel(0x00, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
ret = pcie_phy_poll_ack(dbi_base, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcie_phy_write(void __iomem *dbi_base, int addr, int data)
|
|
{
|
|
u32 var;
|
|
int ret;
|
|
|
|
/* write addr */
|
|
/* cap addr */
|
|
ret = pcie_phy_wait_ack(dbi_base, addr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
var = data << PCIE_PHY_CTRL_DATA_LOC;
|
|
writel(var, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
/* capture data */
|
|
var |= (0x1 << PCIE_PHY_CTRL_CAP_DAT_LOC);
|
|
writel(var, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
ret = pcie_phy_poll_ack(dbi_base, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* deassert cap data */
|
|
var = data << PCIE_PHY_CTRL_DATA_LOC;
|
|
writel(var, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
/* wait for ack de-assertion */
|
|
ret = pcie_phy_poll_ack(dbi_base, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* assert wr signal */
|
|
var = 0x1 << PCIE_PHY_CTRL_WR_LOC;
|
|
writel(var, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
/* wait for ack */
|
|
ret = pcie_phy_poll_ack(dbi_base, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* deassert wr signal */
|
|
var = data << PCIE_PHY_CTRL_DATA_LOC;
|
|
writel(var, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
/* wait for ack de-assertion */
|
|
ret = pcie_phy_poll_ack(dbi_base, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
writel(0x0, dbi_base + PCIE_PHY_CTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Added for PCI abort handling */
|
|
static int imx6q_pcie_abort_handler(unsigned long addr,
|
|
unsigned int fsr, struct pt_regs *regs)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int imx6_pcie_assert_core_reset(struct pcie_port *pp)
|
|
{
|
|
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
|
|
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
|
|
|
|
/* Some boards don't have PCIe reset GPIO. */
|
|
if (gpio_is_valid(imx6_pcie->reset_gpio)) {
|
|
gpio_set_value(imx6_pcie->reset_gpio, 0);
|
|
msleep(100);
|
|
gpio_set_value(imx6_pcie->reset_gpio, 1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx6_pcie_deassert_core_reset(struct pcie_port *pp)
|
|
{
|
|
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
|
|
int ret;
|
|
|
|
if (gpio_is_valid(imx6_pcie->power_on_gpio))
|
|
gpio_set_value(imx6_pcie->power_on_gpio, 1);
|
|
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
|
|
|
|
ret = clk_prepare_enable(imx6_pcie->sata_ref_100m);
|
|
if (ret) {
|
|
dev_err(pp->dev, "unable to enable sata_ref_100m\n");
|
|
goto err_sata_ref;
|
|
}
|
|
|
|
ret = clk_prepare_enable(imx6_pcie->pcie_ref_125m);
|
|
if (ret) {
|
|
dev_err(pp->dev, "unable to enable pcie_ref_125m\n");
|
|
goto err_pcie_ref;
|
|
}
|
|
|
|
ret = clk_prepare_enable(imx6_pcie->lvds_gate);
|
|
if (ret) {
|
|
dev_err(pp->dev, "unable to enable lvds_gate\n");
|
|
goto err_lvds_gate;
|
|
}
|
|
|
|
ret = clk_prepare_enable(imx6_pcie->pcie_axi);
|
|
if (ret) {
|
|
dev_err(pp->dev, "unable to enable pcie_axi\n");
|
|
goto err_pcie_axi;
|
|
}
|
|
|
|
/* allow the clocks to stabilize */
|
|
usleep_range(200, 500);
|
|
|
|
return 0;
|
|
|
|
err_pcie_axi:
|
|
clk_disable_unprepare(imx6_pcie->lvds_gate);
|
|
err_lvds_gate:
|
|
clk_disable_unprepare(imx6_pcie->pcie_ref_125m);
|
|
err_pcie_ref:
|
|
clk_disable_unprepare(imx6_pcie->sata_ref_100m);
|
|
err_sata_ref:
|
|
return ret;
|
|
|
|
}
|
|
|
|
static void imx6_pcie_init_phy(struct pcie_port *pp)
|
|
{
|
|
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
|
|
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
|
|
|
|
/* configure constant input signal to the pcie ctrl and phy */
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6Q_GPR12_DEVICE_TYPE, PCI_EXP_TYPE_ROOT_PORT << 12);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
|
|
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
IMX6Q_GPR8_TX_DEEMPH_GEN1, 0 << 0);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, 0 << 6);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, 20 << 12);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
IMX6Q_GPR8_TX_SWING_FULL, 127 << 18);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
IMX6Q_GPR8_TX_SWING_LOW, 127 << 25);
|
|
}
|
|
|
|
static void imx6_pcie_host_init(struct pcie_port *pp)
|
|
{
|
|
int count = 0;
|
|
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
|
|
|
|
imx6_pcie_assert_core_reset(pp);
|
|
|
|
imx6_pcie_init_phy(pp);
|
|
|
|
imx6_pcie_deassert_core_reset(pp);
|
|
|
|
dw_pcie_setup_rc(pp);
|
|
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
|
|
|
|
while (!dw_pcie_link_up(pp)) {
|
|
usleep_range(100, 1000);
|
|
count++;
|
|
if (count >= 200) {
|
|
dev_err(pp->dev, "phy link never came up\n");
|
|
dev_dbg(pp->dev,
|
|
"DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
|
|
readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
|
|
readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
|
|
break;
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static int imx6_pcie_link_up(struct pcie_port *pp)
|
|
{
|
|
u32 rc, ltssm, rx_valid, temp;
|
|
|
|
/*
|
|
* Test if the PHY reports that the link is up and also that
|
|
* the link training finished. It might happen that the PHY
|
|
* reports the link is already up, but the link training bit
|
|
* is still set, so make sure to check the training is done
|
|
* as well here.
|
|
*/
|
|
rc = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1);
|
|
if ((rc & PCIE_PHY_DEBUG_R1_XMLH_LINK_UP) &&
|
|
!(rc & PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING))
|
|
return 1;
|
|
|
|
/*
|
|
* From L0, initiate MAC entry to gen2 if EP/RC supports gen2.
|
|
* Wait 2ms (LTSSM timeout is 24ms, PHY lock is ~5us in gen2).
|
|
* If (MAC/LTSSM.state == Recovery.RcvrLock)
|
|
* && (PHY/rx_valid==0) then pulse PHY/rx_reset. Transition
|
|
* to gen2 is stuck
|
|
*/
|
|
pcie_phy_read(pp->dbi_base, PCIE_PHY_RX_ASIC_OUT, &rx_valid);
|
|
ltssm = readl(pp->dbi_base + PCIE_PHY_DEBUG_R0) & 0x3F;
|
|
|
|
if (rx_valid & 0x01)
|
|
return 0;
|
|
|
|
if (ltssm != 0x0d)
|
|
return 0;
|
|
|
|
dev_err(pp->dev, "transition to gen2 is stuck, reset PHY!\n");
|
|
|
|
pcie_phy_read(pp->dbi_base,
|
|
PHY_RX_OVRD_IN_LO, &temp);
|
|
temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN
|
|
| PHY_RX_OVRD_IN_LO_RX_PLL_EN);
|
|
pcie_phy_write(pp->dbi_base,
|
|
PHY_RX_OVRD_IN_LO, temp);
|
|
|
|
usleep_range(2000, 3000);
|
|
|
|
pcie_phy_read(pp->dbi_base,
|
|
PHY_RX_OVRD_IN_LO, &temp);
|
|
temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN
|
|
| PHY_RX_OVRD_IN_LO_RX_PLL_EN);
|
|
pcie_phy_write(pp->dbi_base,
|
|
PHY_RX_OVRD_IN_LO, temp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct pcie_host_ops imx6_pcie_host_ops = {
|
|
.link_up = imx6_pcie_link_up,
|
|
.host_init = imx6_pcie_host_init,
|
|
};
|
|
|
|
static int imx6_add_pcie_port(struct pcie_port *pp,
|
|
struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
|
|
pp->irq = platform_get_irq(pdev, 0);
|
|
if (!pp->irq) {
|
|
dev_err(&pdev->dev, "failed to get irq\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
pp->root_bus_nr = -1;
|
|
pp->ops = &imx6_pcie_host_ops;
|
|
|
|
spin_lock_init(&pp->conf_lock);
|
|
ret = dw_pcie_host_init(pp);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to initialize host\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init imx6_pcie_probe(struct platform_device *pdev)
|
|
{
|
|
struct imx6_pcie *imx6_pcie;
|
|
struct pcie_port *pp;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct resource *dbi_base;
|
|
int ret;
|
|
|
|
imx6_pcie = devm_kzalloc(&pdev->dev, sizeof(*imx6_pcie), GFP_KERNEL);
|
|
if (!imx6_pcie)
|
|
return -ENOMEM;
|
|
|
|
pp = &imx6_pcie->pp;
|
|
pp->dev = &pdev->dev;
|
|
|
|
/* Added for PCI abort handling */
|
|
hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0,
|
|
"imprecise external abort");
|
|
|
|
dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
pp->dbi_base = devm_ioremap_resource(&pdev->dev, dbi_base);
|
|
if (IS_ERR(pp->dbi_base))
|
|
return PTR_ERR(pp->dbi_base);
|
|
|
|
/* Fetch GPIOs */
|
|
imx6_pcie->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0);
|
|
if (gpio_is_valid(imx6_pcie->reset_gpio)) {
|
|
ret = devm_gpio_request_one(&pdev->dev, imx6_pcie->reset_gpio,
|
|
GPIOF_OUT_INIT_LOW, "PCIe reset");
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to get reset gpio\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
imx6_pcie->power_on_gpio = of_get_named_gpio(np, "power-on-gpio", 0);
|
|
if (gpio_is_valid(imx6_pcie->power_on_gpio)) {
|
|
ret = devm_gpio_request_one(&pdev->dev,
|
|
imx6_pcie->power_on_gpio,
|
|
GPIOF_OUT_INIT_LOW,
|
|
"PCIe power enable");
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to get power-on gpio\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
imx6_pcie->wake_up_gpio = of_get_named_gpio(np, "wake-up-gpio", 0);
|
|
if (gpio_is_valid(imx6_pcie->wake_up_gpio)) {
|
|
ret = devm_gpio_request_one(&pdev->dev,
|
|
imx6_pcie->wake_up_gpio,
|
|
GPIOF_IN,
|
|
"PCIe wake up");
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to get wake-up gpio\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
imx6_pcie->disable_gpio = of_get_named_gpio(np, "disable-gpio", 0);
|
|
if (gpio_is_valid(imx6_pcie->disable_gpio)) {
|
|
ret = devm_gpio_request_one(&pdev->dev,
|
|
imx6_pcie->disable_gpio,
|
|
GPIOF_OUT_INIT_HIGH,
|
|
"PCIe disable endpoint");
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to get disable-ep gpio\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* Fetch clocks */
|
|
imx6_pcie->lvds_gate = devm_clk_get(&pdev->dev, "lvds_gate");
|
|
if (IS_ERR(imx6_pcie->lvds_gate)) {
|
|
dev_err(&pdev->dev,
|
|
"lvds_gate clock select missing or invalid\n");
|
|
return PTR_ERR(imx6_pcie->lvds_gate);
|
|
}
|
|
|
|
imx6_pcie->sata_ref_100m = devm_clk_get(&pdev->dev, "sata_ref_100m");
|
|
if (IS_ERR(imx6_pcie->sata_ref_100m)) {
|
|
dev_err(&pdev->dev,
|
|
"sata_ref_100m clock source missing or invalid\n");
|
|
return PTR_ERR(imx6_pcie->sata_ref_100m);
|
|
}
|
|
|
|
imx6_pcie->pcie_ref_125m = devm_clk_get(&pdev->dev, "pcie_ref_125m");
|
|
if (IS_ERR(imx6_pcie->pcie_ref_125m)) {
|
|
dev_err(&pdev->dev,
|
|
"pcie_ref_125m clock source missing or invalid\n");
|
|
return PTR_ERR(imx6_pcie->pcie_ref_125m);
|
|
}
|
|
|
|
imx6_pcie->pcie_axi = devm_clk_get(&pdev->dev, "pcie_axi");
|
|
if (IS_ERR(imx6_pcie->pcie_axi)) {
|
|
dev_err(&pdev->dev,
|
|
"pcie_axi clock source missing or invalid\n");
|
|
return PTR_ERR(imx6_pcie->pcie_axi);
|
|
}
|
|
|
|
/* Grab GPR config register range */
|
|
imx6_pcie->iomuxc_gpr =
|
|
syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
|
|
if (IS_ERR(imx6_pcie->iomuxc_gpr)) {
|
|
dev_err(&pdev->dev, "unable to find iomuxc registers\n");
|
|
return PTR_ERR(imx6_pcie->iomuxc_gpr);
|
|
}
|
|
|
|
ret = imx6_add_pcie_port(pp, pdev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
platform_set_drvdata(pdev, imx6_pcie);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id imx6_pcie_of_match[] = {
|
|
{ .compatible = "fsl,imx6q-pcie", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, imx6_pcie_of_match);
|
|
|
|
static struct platform_driver imx6_pcie_driver = {
|
|
.driver = {
|
|
.name = "imx6q-pcie",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = imx6_pcie_of_match,
|
|
},
|
|
};
|
|
|
|
/* Freescale PCIe driver does not allow module unload */
|
|
|
|
static int __init imx6_pcie_init(void)
|
|
{
|
|
return platform_driver_probe(&imx6_pcie_driver, imx6_pcie_probe);
|
|
}
|
|
fs_initcall(imx6_pcie_init);
|
|
|
|
MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");
|
|
MODULE_DESCRIPTION("Freescale i.MX6 PCIe host controller driver");
|
|
MODULE_LICENSE("GPL v2");
|