mirror of
https://github.com/torvalds/linux.git
synced 2024-12-12 14:12:51 +00:00
7e8d5755be
Add support for 64-bit platforms to driver. The hardware only supports 32-bit register accesses so the accesses need to be split up into two writes when setting the current and tail descriptor values. Signed-off-by: Moritz Fischer <mdf@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1360 lines
37 KiB
C
1360 lines
37 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/* Copyright (c) 2016-2017, National Instruments Corp.
|
|
*
|
|
* Author: Moritz Fischer <mdf@kernel.org>
|
|
*/
|
|
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_mdio.h>
|
|
#include <linux/of_net.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/nvmem-consumer.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/iopoll.h>
|
|
|
|
#define TX_BD_NUM 64
|
|
#define RX_BD_NUM 128
|
|
|
|
/* Axi DMA Register definitions */
|
|
#define XAXIDMA_TX_CR_OFFSET 0x00 /* Channel control */
|
|
#define XAXIDMA_TX_SR_OFFSET 0x04 /* Status */
|
|
#define XAXIDMA_TX_CDESC_OFFSET 0x08 /* Current descriptor pointer */
|
|
#define XAXIDMA_TX_TDESC_OFFSET 0x10 /* Tail descriptor pointer */
|
|
|
|
#define XAXIDMA_RX_CR_OFFSET 0x30 /* Channel control */
|
|
#define XAXIDMA_RX_SR_OFFSET 0x34 /* Status */
|
|
#define XAXIDMA_RX_CDESC_OFFSET 0x38 /* Current descriptor pointer */
|
|
#define XAXIDMA_RX_TDESC_OFFSET 0x40 /* Tail descriptor pointer */
|
|
|
|
#define XAXIDMA_CR_RUNSTOP_MASK 0x1 /* Start/stop DMA channel */
|
|
#define XAXIDMA_CR_RESET_MASK 0x4 /* Reset DMA engine */
|
|
|
|
#define XAXIDMA_BD_CTRL_LENGTH_MASK 0x007FFFFF /* Requested len */
|
|
#define XAXIDMA_BD_CTRL_TXSOF_MASK 0x08000000 /* First tx packet */
|
|
#define XAXIDMA_BD_CTRL_TXEOF_MASK 0x04000000 /* Last tx packet */
|
|
#define XAXIDMA_BD_CTRL_ALL_MASK 0x0C000000 /* All control bits */
|
|
|
|
#define XAXIDMA_DELAY_MASK 0xFF000000 /* Delay timeout counter */
|
|
#define XAXIDMA_COALESCE_MASK 0x00FF0000 /* Coalesce counter */
|
|
|
|
#define XAXIDMA_DELAY_SHIFT 24
|
|
#define XAXIDMA_COALESCE_SHIFT 16
|
|
|
|
#define XAXIDMA_IRQ_IOC_MASK 0x00001000 /* Completion intr */
|
|
#define XAXIDMA_IRQ_DELAY_MASK 0x00002000 /* Delay interrupt */
|
|
#define XAXIDMA_IRQ_ERROR_MASK 0x00004000 /* Error interrupt */
|
|
#define XAXIDMA_IRQ_ALL_MASK 0x00007000 /* All interrupts */
|
|
|
|
/* Default TX/RX Threshold and waitbound values for SGDMA mode */
|
|
#define XAXIDMA_DFT_TX_THRESHOLD 24
|
|
#define XAXIDMA_DFT_TX_WAITBOUND 254
|
|
#define XAXIDMA_DFT_RX_THRESHOLD 24
|
|
#define XAXIDMA_DFT_RX_WAITBOUND 254
|
|
|
|
#define XAXIDMA_BD_STS_ACTUAL_LEN_MASK 0x007FFFFF /* Actual len */
|
|
#define XAXIDMA_BD_STS_COMPLETE_MASK 0x80000000 /* Completed */
|
|
#define XAXIDMA_BD_STS_DEC_ERR_MASK 0x40000000 /* Decode error */
|
|
#define XAXIDMA_BD_STS_SLV_ERR_MASK 0x20000000 /* Slave error */
|
|
#define XAXIDMA_BD_STS_INT_ERR_MASK 0x10000000 /* Internal err */
|
|
#define XAXIDMA_BD_STS_ALL_ERR_MASK 0x70000000 /* All errors */
|
|
#define XAXIDMA_BD_STS_RXSOF_MASK 0x08000000 /* First rx pkt */
|
|
#define XAXIDMA_BD_STS_RXEOF_MASK 0x04000000 /* Last rx pkt */
|
|
#define XAXIDMA_BD_STS_ALL_MASK 0xFC000000 /* All status bits */
|
|
|
|
#define NIXGE_REG_CTRL_OFFSET 0x4000
|
|
#define NIXGE_REG_INFO 0x00
|
|
#define NIXGE_REG_MAC_CTL 0x04
|
|
#define NIXGE_REG_PHY_CTL 0x08
|
|
#define NIXGE_REG_LED_CTL 0x0c
|
|
#define NIXGE_REG_MDIO_DATA 0x10
|
|
#define NIXGE_REG_MDIO_ADDR 0x14
|
|
#define NIXGE_REG_MDIO_OP 0x18
|
|
#define NIXGE_REG_MDIO_CTRL 0x1c
|
|
|
|
#define NIXGE_ID_LED_CTL_EN BIT(0)
|
|
#define NIXGE_ID_LED_CTL_VAL BIT(1)
|
|
|
|
#define NIXGE_MDIO_CLAUSE45 BIT(12)
|
|
#define NIXGE_MDIO_CLAUSE22 0
|
|
#define NIXGE_MDIO_OP(n) (((n) & 0x3) << 10)
|
|
#define NIXGE_MDIO_OP_ADDRESS 0
|
|
#define NIXGE_MDIO_C45_WRITE BIT(0)
|
|
#define NIXGE_MDIO_C45_READ (BIT(1) | BIT(0))
|
|
#define NIXGE_MDIO_C22_WRITE BIT(0)
|
|
#define NIXGE_MDIO_C22_READ BIT(1)
|
|
#define NIXGE_MDIO_ADDR(n) (((n) & 0x1f) << 5)
|
|
#define NIXGE_MDIO_MMD(n) (((n) & 0x1f) << 0)
|
|
|
|
#define NIXGE_REG_MAC_LSB 0x1000
|
|
#define NIXGE_REG_MAC_MSB 0x1004
|
|
|
|
/* Packet size info */
|
|
#define NIXGE_HDR_SIZE 14 /* Size of Ethernet header */
|
|
#define NIXGE_TRL_SIZE 4 /* Size of Ethernet trailer (FCS) */
|
|
#define NIXGE_MTU 1500 /* Max MTU of an Ethernet frame */
|
|
#define NIXGE_JUMBO_MTU 9000 /* Max MTU of a jumbo Eth. frame */
|
|
|
|
#define NIXGE_MAX_FRAME_SIZE (NIXGE_MTU + NIXGE_HDR_SIZE + NIXGE_TRL_SIZE)
|
|
#define NIXGE_MAX_JUMBO_FRAME_SIZE \
|
|
(NIXGE_JUMBO_MTU + NIXGE_HDR_SIZE + NIXGE_TRL_SIZE)
|
|
|
|
struct nixge_hw_dma_bd {
|
|
u32 next_lo;
|
|
u32 next_hi;
|
|
u32 phys_lo;
|
|
u32 phys_hi;
|
|
u32 reserved3;
|
|
u32 reserved4;
|
|
u32 cntrl;
|
|
u32 status;
|
|
u32 app0;
|
|
u32 app1;
|
|
u32 app2;
|
|
u32 app3;
|
|
u32 app4;
|
|
u32 sw_id_offset_lo;
|
|
u32 sw_id_offset_hi;
|
|
u32 reserved6;
|
|
};
|
|
|
|
#ifdef CONFIG_PHYS_ADDR_T_64BIT
|
|
#define nixge_hw_dma_bd_set_addr(bd, field, addr) \
|
|
do { \
|
|
(bd)->field##_lo = lower_32_bits(((u64)addr)); \
|
|
(bd)->field##_hi = upper_32_bits(((u64)addr)); \
|
|
} while (0)
|
|
#else
|
|
#define nixge_hw_dma_bd_set_addr(bd, field, addr) \
|
|
((bd)->field##_lo = lower_32_bits((addr)))
|
|
#endif
|
|
|
|
#define nixge_hw_dma_bd_set_phys(bd, addr) \
|
|
nixge_hw_dma_bd_set_addr((bd), phys, (addr))
|
|
|
|
#define nixge_hw_dma_bd_set_next(bd, addr) \
|
|
nixge_hw_dma_bd_set_addr((bd), next, (addr))
|
|
|
|
#define nixge_hw_dma_bd_set_offset(bd, addr) \
|
|
nixge_hw_dma_bd_set_addr((bd), sw_id_offset, (addr))
|
|
|
|
#ifdef CONFIG_PHYS_ADDR_T_64BIT
|
|
#define nixge_hw_dma_bd_get_addr(bd, field) \
|
|
(dma_addr_t)((((u64)(bd)->field##_hi) << 32) | ((bd)->field##_lo))
|
|
#else
|
|
#define nixge_hw_dma_bd_get_addr(bd, field) \
|
|
(dma_addr_t)((bd)->field##_lo)
|
|
#endif
|
|
|
|
struct nixge_tx_skb {
|
|
struct sk_buff *skb;
|
|
dma_addr_t mapping;
|
|
size_t size;
|
|
bool mapped_as_page;
|
|
};
|
|
|
|
struct nixge_priv {
|
|
struct net_device *ndev;
|
|
struct napi_struct napi;
|
|
struct device *dev;
|
|
|
|
/* Connection to PHY device */
|
|
struct device_node *phy_node;
|
|
phy_interface_t phy_mode;
|
|
|
|
int link;
|
|
unsigned int speed;
|
|
unsigned int duplex;
|
|
|
|
/* MDIO bus data */
|
|
struct mii_bus *mii_bus; /* MII bus reference */
|
|
|
|
/* IO registers, dma functions and IRQs */
|
|
void __iomem *ctrl_regs;
|
|
void __iomem *dma_regs;
|
|
|
|
struct tasklet_struct dma_err_tasklet;
|
|
|
|
int tx_irq;
|
|
int rx_irq;
|
|
|
|
/* Buffer descriptors */
|
|
struct nixge_hw_dma_bd *tx_bd_v;
|
|
struct nixge_tx_skb *tx_skb;
|
|
dma_addr_t tx_bd_p;
|
|
|
|
struct nixge_hw_dma_bd *rx_bd_v;
|
|
dma_addr_t rx_bd_p;
|
|
u32 tx_bd_ci;
|
|
u32 tx_bd_tail;
|
|
u32 rx_bd_ci;
|
|
|
|
u32 coalesce_count_rx;
|
|
u32 coalesce_count_tx;
|
|
};
|
|
|
|
static void nixge_dma_write_reg(struct nixge_priv *priv, off_t offset, u32 val)
|
|
{
|
|
writel(val, priv->dma_regs + offset);
|
|
}
|
|
|
|
static void nixge_dma_write_desc_reg(struct nixge_priv *priv, off_t offset,
|
|
dma_addr_t addr)
|
|
{
|
|
writel(lower_32_bits(addr), priv->dma_regs + offset);
|
|
#ifdef CONFIG_PHYS_ADDR_T_64BIT
|
|
writel(upper_32_bits(addr), priv->dma_regs + offset + 4);
|
|
#endif
|
|
}
|
|
|
|
static u32 nixge_dma_read_reg(const struct nixge_priv *priv, off_t offset)
|
|
{
|
|
return readl(priv->dma_regs + offset);
|
|
}
|
|
|
|
static void nixge_ctrl_write_reg(struct nixge_priv *priv, off_t offset, u32 val)
|
|
{
|
|
writel(val, priv->ctrl_regs + offset);
|
|
}
|
|
|
|
static u32 nixge_ctrl_read_reg(struct nixge_priv *priv, off_t offset)
|
|
{
|
|
return readl(priv->ctrl_regs + offset);
|
|
}
|
|
|
|
#define nixge_ctrl_poll_timeout(priv, addr, val, cond, sleep_us, timeout_us) \
|
|
readl_poll_timeout((priv)->ctrl_regs + (addr), (val), (cond), \
|
|
(sleep_us), (timeout_us))
|
|
|
|
#define nixge_dma_poll_timeout(priv, addr, val, cond, sleep_us, timeout_us) \
|
|
readl_poll_timeout((priv)->dma_regs + (addr), (val), (cond), \
|
|
(sleep_us), (timeout_us))
|
|
|
|
static void nixge_hw_dma_bd_release(struct net_device *ndev)
|
|
{
|
|
struct nixge_priv *priv = netdev_priv(ndev);
|
|
dma_addr_t phys_addr;
|
|
struct sk_buff *skb;
|
|
int i;
|
|
|
|
for (i = 0; i < RX_BD_NUM; i++) {
|
|
phys_addr = nixge_hw_dma_bd_get_addr(&priv->rx_bd_v[i],
|
|
phys);
|
|
|
|
dma_unmap_single(ndev->dev.parent, phys_addr,
|
|
NIXGE_MAX_JUMBO_FRAME_SIZE,
|
|
DMA_FROM_DEVICE);
|
|
|
|
skb = (struct sk_buff *)
|
|
nixge_hw_dma_bd_get_addr(&priv->rx_bd_v[i],
|
|
sw_id_offset);
|
|
dev_kfree_skb(skb);
|
|
}
|
|
|
|
if (priv->rx_bd_v)
|
|
dma_free_coherent(ndev->dev.parent,
|
|
sizeof(*priv->rx_bd_v) * RX_BD_NUM,
|
|
priv->rx_bd_v,
|
|
priv->rx_bd_p);
|
|
|
|
if (priv->tx_skb)
|
|
devm_kfree(ndev->dev.parent, priv->tx_skb);
|
|
|
|
if (priv->tx_bd_v)
|
|
dma_free_coherent(ndev->dev.parent,
|
|
sizeof(*priv->tx_bd_v) * TX_BD_NUM,
|
|
priv->tx_bd_v,
|
|
priv->tx_bd_p);
|
|
}
|
|
|
|
static int nixge_hw_dma_bd_init(struct net_device *ndev)
|
|
{
|
|
struct nixge_priv *priv = netdev_priv(ndev);
|
|
struct sk_buff *skb;
|
|
dma_addr_t phys;
|
|
u32 cr;
|
|
int i;
|
|
|
|
/* Reset the indexes which are used for accessing the BDs */
|
|
priv->tx_bd_ci = 0;
|
|
priv->tx_bd_tail = 0;
|
|
priv->rx_bd_ci = 0;
|
|
|
|
/* Allocate the Tx and Rx buffer descriptors. */
|
|
priv->tx_bd_v = dma_zalloc_coherent(ndev->dev.parent,
|
|
sizeof(*priv->tx_bd_v) * TX_BD_NUM,
|
|
&priv->tx_bd_p, GFP_KERNEL);
|
|
if (!priv->tx_bd_v)
|
|
goto out;
|
|
|
|
priv->tx_skb = devm_kcalloc(ndev->dev.parent,
|
|
TX_BD_NUM, sizeof(*priv->tx_skb),
|
|
GFP_KERNEL);
|
|
if (!priv->tx_skb)
|
|
goto out;
|
|
|
|
priv->rx_bd_v = dma_zalloc_coherent(ndev->dev.parent,
|
|
sizeof(*priv->rx_bd_v) * RX_BD_NUM,
|
|
&priv->rx_bd_p, GFP_KERNEL);
|
|
if (!priv->rx_bd_v)
|
|
goto out;
|
|
|
|
for (i = 0; i < TX_BD_NUM; i++) {
|
|
nixge_hw_dma_bd_set_next(&priv->tx_bd_v[i],
|
|
priv->tx_bd_p +
|
|
sizeof(*priv->tx_bd_v) *
|
|
((i + 1) % TX_BD_NUM));
|
|
}
|
|
|
|
for (i = 0; i < RX_BD_NUM; i++) {
|
|
nixge_hw_dma_bd_set_next(&priv->rx_bd_v[i],
|
|
priv->rx_bd_p
|
|
+ sizeof(*priv->rx_bd_v) *
|
|
((i + 1) % RX_BD_NUM));
|
|
|
|
skb = netdev_alloc_skb_ip_align(ndev,
|
|
NIXGE_MAX_JUMBO_FRAME_SIZE);
|
|
if (!skb)
|
|
goto out;
|
|
|
|
nixge_hw_dma_bd_set_offset(&priv->rx_bd_v[i], skb);
|
|
phys = dma_map_single(ndev->dev.parent, skb->data,
|
|
NIXGE_MAX_JUMBO_FRAME_SIZE,
|
|
DMA_FROM_DEVICE);
|
|
|
|
nixge_hw_dma_bd_set_phys(&priv->rx_bd_v[i], phys);
|
|
|
|
priv->rx_bd_v[i].cntrl = NIXGE_MAX_JUMBO_FRAME_SIZE;
|
|
}
|
|
|
|
/* Start updating the Rx channel control register */
|
|
cr = nixge_dma_read_reg(priv, XAXIDMA_RX_CR_OFFSET);
|
|
/* Update the interrupt coalesce count */
|
|
cr = ((cr & ~XAXIDMA_COALESCE_MASK) |
|
|
((priv->coalesce_count_rx) << XAXIDMA_COALESCE_SHIFT));
|
|
/* Update the delay timer count */
|
|
cr = ((cr & ~XAXIDMA_DELAY_MASK) |
|
|
(XAXIDMA_DFT_RX_WAITBOUND << XAXIDMA_DELAY_SHIFT));
|
|
/* Enable coalesce, delay timer and error interrupts */
|
|
cr |= XAXIDMA_IRQ_ALL_MASK;
|
|
/* Write to the Rx channel control register */
|
|
nixge_dma_write_reg(priv, XAXIDMA_RX_CR_OFFSET, cr);
|
|
|
|
/* Start updating the Tx channel control register */
|
|
cr = nixge_dma_read_reg(priv, XAXIDMA_TX_CR_OFFSET);
|
|
/* Update the interrupt coalesce count */
|
|
cr = (((cr & ~XAXIDMA_COALESCE_MASK)) |
|
|
((priv->coalesce_count_tx) << XAXIDMA_COALESCE_SHIFT));
|
|
/* Update the delay timer count */
|
|
cr = (((cr & ~XAXIDMA_DELAY_MASK)) |
|
|
(XAXIDMA_DFT_TX_WAITBOUND << XAXIDMA_DELAY_SHIFT));
|
|
/* Enable coalesce, delay timer and error interrupts */
|
|
cr |= XAXIDMA_IRQ_ALL_MASK;
|
|
/* Write to the Tx channel control register */
|
|
nixge_dma_write_reg(priv, XAXIDMA_TX_CR_OFFSET, cr);
|
|
|
|
/* Populate the tail pointer and bring the Rx Axi DMA engine out of
|
|
* halted state. This will make the Rx side ready for reception.
|
|
*/
|
|
nixge_dma_write_desc_reg(priv, XAXIDMA_RX_CDESC_OFFSET, priv->rx_bd_p);
|
|
cr = nixge_dma_read_reg(priv, XAXIDMA_RX_CR_OFFSET);
|
|
nixge_dma_write_reg(priv, XAXIDMA_RX_CR_OFFSET,
|
|
cr | XAXIDMA_CR_RUNSTOP_MASK);
|
|
nixge_dma_write_desc_reg(priv, XAXIDMA_RX_TDESC_OFFSET, priv->rx_bd_p +
|
|
(sizeof(*priv->rx_bd_v) * (RX_BD_NUM - 1)));
|
|
|
|
/* Write to the RS (Run-stop) bit in the Tx channel control register.
|
|
* Tx channel is now ready to run. But only after we write to the
|
|
* tail pointer register that the Tx channel will start transmitting.
|
|
*/
|
|
nixge_dma_write_desc_reg(priv, XAXIDMA_TX_CDESC_OFFSET, priv->tx_bd_p);
|
|
cr = nixge_dma_read_reg(priv, XAXIDMA_TX_CR_OFFSET);
|
|
nixge_dma_write_reg(priv, XAXIDMA_TX_CR_OFFSET,
|
|
cr | XAXIDMA_CR_RUNSTOP_MASK);
|
|
|
|
return 0;
|
|
out:
|
|
nixge_hw_dma_bd_release(ndev);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void __nixge_device_reset(struct nixge_priv *priv, off_t offset)
|
|
{
|
|
u32 status;
|
|
int err;
|
|
|
|
/* Reset Axi DMA. This would reset NIXGE Ethernet core as well.
|
|
* The reset process of Axi DMA takes a while to complete as all
|
|
* pending commands/transfers will be flushed or completed during
|
|
* this reset process.
|
|
*/
|
|
nixge_dma_write_reg(priv, offset, XAXIDMA_CR_RESET_MASK);
|
|
err = nixge_dma_poll_timeout(priv, offset, status,
|
|
!(status & XAXIDMA_CR_RESET_MASK), 10,
|
|
1000);
|
|
if (err)
|
|
netdev_err(priv->ndev, "%s: DMA reset timeout!\n", __func__);
|
|
}
|
|
|
|
static void nixge_device_reset(struct net_device *ndev)
|
|
{
|
|
struct nixge_priv *priv = netdev_priv(ndev);
|
|
|
|
__nixge_device_reset(priv, XAXIDMA_TX_CR_OFFSET);
|
|
__nixge_device_reset(priv, XAXIDMA_RX_CR_OFFSET);
|
|
|
|
if (nixge_hw_dma_bd_init(ndev))
|
|
netdev_err(ndev, "%s: descriptor allocation failed\n",
|
|
__func__);
|
|
|
|
netif_trans_update(ndev);
|
|
}
|
|
|
|
static void nixge_handle_link_change(struct net_device *ndev)
|
|
{
|
|
struct nixge_priv *priv = netdev_priv(ndev);
|
|
struct phy_device *phydev = ndev->phydev;
|
|
|
|
if (phydev->link != priv->link || phydev->speed != priv->speed ||
|
|
phydev->duplex != priv->duplex) {
|
|
priv->link = phydev->link;
|
|
priv->speed = phydev->speed;
|
|
priv->duplex = phydev->duplex;
|
|
phy_print_status(phydev);
|
|
}
|
|
}
|
|
|
|
static void nixge_tx_skb_unmap(struct nixge_priv *priv,
|
|
struct nixge_tx_skb *tx_skb)
|
|
{
|
|
if (tx_skb->mapping) {
|
|
if (tx_skb->mapped_as_page)
|
|
dma_unmap_page(priv->ndev->dev.parent, tx_skb->mapping,
|
|
tx_skb->size, DMA_TO_DEVICE);
|
|
else
|
|
dma_unmap_single(priv->ndev->dev.parent,
|
|
tx_skb->mapping,
|
|
tx_skb->size, DMA_TO_DEVICE);
|
|
tx_skb->mapping = 0;
|
|
}
|
|
|
|
if (tx_skb->skb) {
|
|
dev_kfree_skb_any(tx_skb->skb);
|
|
tx_skb->skb = NULL;
|
|
}
|
|
}
|
|
|
|
static void nixge_start_xmit_done(struct net_device *ndev)
|
|
{
|
|
struct nixge_priv *priv = netdev_priv(ndev);
|
|
struct nixge_hw_dma_bd *cur_p;
|
|
struct nixge_tx_skb *tx_skb;
|
|
unsigned int status = 0;
|
|
u32 packets = 0;
|
|
u32 size = 0;
|
|
|
|
cur_p = &priv->tx_bd_v[priv->tx_bd_ci];
|
|
tx_skb = &priv->tx_skb[priv->tx_bd_ci];
|
|
|
|
status = cur_p->status;
|
|
|
|
while (status & XAXIDMA_BD_STS_COMPLETE_MASK) {
|
|
nixge_tx_skb_unmap(priv, tx_skb);
|
|
cur_p->status = 0;
|
|
|
|
size += status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK;
|
|
packets++;
|
|
|
|
++priv->tx_bd_ci;
|
|
priv->tx_bd_ci %= TX_BD_NUM;
|
|
cur_p = &priv->tx_bd_v[priv->tx_bd_ci];
|
|
tx_skb = &priv->tx_skb[priv->tx_bd_ci];
|
|
status = cur_p->status;
|
|
}
|
|
|
|
ndev->stats.tx_packets += packets;
|
|
ndev->stats.tx_bytes += size;
|
|
|
|
if (packets)
|
|
netif_wake_queue(ndev);
|
|
}
|
|
|
|
static int nixge_check_tx_bd_space(struct nixge_priv *priv,
|
|
int num_frag)
|
|
{
|
|
struct nixge_hw_dma_bd *cur_p;
|
|
|
|
cur_p = &priv->tx_bd_v[(priv->tx_bd_tail + num_frag) % TX_BD_NUM];
|
|
if (cur_p->status & XAXIDMA_BD_STS_ALL_MASK)
|
|
return NETDEV_TX_BUSY;
|
|
return 0;
|
|
}
|
|
|
|
static int nixge_start_xmit(struct sk_buff *skb, struct net_device *ndev)
|
|
{
|
|
struct nixge_priv *priv = netdev_priv(ndev);
|
|
struct nixge_hw_dma_bd *cur_p;
|
|
struct nixge_tx_skb *tx_skb;
|
|
dma_addr_t tail_p, cur_phys;
|
|
skb_frag_t *frag;
|
|
u32 num_frag;
|
|
u32 ii;
|
|
|
|
num_frag = skb_shinfo(skb)->nr_frags;
|
|
cur_p = &priv->tx_bd_v[priv->tx_bd_tail];
|
|
tx_skb = &priv->tx_skb[priv->tx_bd_tail];
|
|
|
|
if (nixge_check_tx_bd_space(priv, num_frag)) {
|
|
if (!netif_queue_stopped(ndev))
|
|
netif_stop_queue(ndev);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
cur_phys = dma_map_single(ndev->dev.parent, skb->data,
|
|
skb_headlen(skb), DMA_TO_DEVICE);
|
|
if (dma_mapping_error(ndev->dev.parent, cur_phys))
|
|
goto drop;
|
|
nixge_hw_dma_bd_set_phys(cur_p, cur_phys);
|
|
|
|
cur_p->cntrl = skb_headlen(skb) | XAXIDMA_BD_CTRL_TXSOF_MASK;
|
|
|
|
tx_skb->skb = NULL;
|
|
tx_skb->mapping = cur_phys;
|
|
tx_skb->size = skb_headlen(skb);
|
|
tx_skb->mapped_as_page = false;
|
|
|
|
for (ii = 0; ii < num_frag; ii++) {
|
|
++priv->tx_bd_tail;
|
|
priv->tx_bd_tail %= TX_BD_NUM;
|
|
cur_p = &priv->tx_bd_v[priv->tx_bd_tail];
|
|
tx_skb = &priv->tx_skb[priv->tx_bd_tail];
|
|
frag = &skb_shinfo(skb)->frags[ii];
|
|
|
|
cur_phys = skb_frag_dma_map(ndev->dev.parent, frag, 0,
|
|
skb_frag_size(frag),
|
|
DMA_TO_DEVICE);
|
|
if (dma_mapping_error(ndev->dev.parent, cur_phys))
|
|
goto frag_err;
|
|
nixge_hw_dma_bd_set_phys(cur_p, cur_phys);
|
|
|
|
cur_p->cntrl = skb_frag_size(frag);
|
|
|
|
tx_skb->skb = NULL;
|
|
tx_skb->mapping = cur_phys;
|
|
tx_skb->size = skb_frag_size(frag);
|
|
tx_skb->mapped_as_page = true;
|
|
}
|
|
|
|
/* last buffer of the frame */
|
|
tx_skb->skb = skb;
|
|
|
|
cur_p->cntrl |= XAXIDMA_BD_CTRL_TXEOF_MASK;
|
|
|
|
tail_p = priv->tx_bd_p + sizeof(*priv->tx_bd_v) * priv->tx_bd_tail;
|
|
/* Start the transfer */
|
|
nixge_dma_write_desc_reg(priv, XAXIDMA_TX_TDESC_OFFSET, tail_p);
|
|
++priv->tx_bd_tail;
|
|
priv->tx_bd_tail %= TX_BD_NUM;
|
|
|
|
return NETDEV_TX_OK;
|
|
frag_err:
|
|
for (; ii > 0; ii--) {
|
|
if (priv->tx_bd_tail)
|
|
priv->tx_bd_tail--;
|
|
else
|
|
priv->tx_bd_tail = TX_BD_NUM - 1;
|
|
|
|
tx_skb = &priv->tx_skb[priv->tx_bd_tail];
|
|
nixge_tx_skb_unmap(priv, tx_skb);
|
|
|
|
cur_p = &priv->tx_bd_v[priv->tx_bd_tail];
|
|
cur_p->status = 0;
|
|
}
|
|
dma_unmap_single(priv->ndev->dev.parent,
|
|
tx_skb->mapping,
|
|
tx_skb->size, DMA_TO_DEVICE);
|
|
drop:
|
|
ndev->stats.tx_dropped++;
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static int nixge_recv(struct net_device *ndev, int budget)
|
|
{
|
|
struct nixge_priv *priv = netdev_priv(ndev);
|
|
struct sk_buff *skb, *new_skb;
|
|
struct nixge_hw_dma_bd *cur_p;
|
|
dma_addr_t tail_p = 0, cur_phys = 0;
|
|
u32 packets = 0;
|
|
u32 length = 0;
|
|
u32 size = 0;
|
|
|
|
cur_p = &priv->rx_bd_v[priv->rx_bd_ci];
|
|
|
|
while ((cur_p->status & XAXIDMA_BD_STS_COMPLETE_MASK &&
|
|
budget > packets)) {
|
|
tail_p = priv->rx_bd_p + sizeof(*priv->rx_bd_v) *
|
|
priv->rx_bd_ci;
|
|
|
|
skb = (struct sk_buff *)nixge_hw_dma_bd_get_addr(cur_p,
|
|
sw_id_offset);
|
|
|
|
length = cur_p->status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK;
|
|
if (length > NIXGE_MAX_JUMBO_FRAME_SIZE)
|
|
length = NIXGE_MAX_JUMBO_FRAME_SIZE;
|
|
|
|
dma_unmap_single(ndev->dev.parent,
|
|
nixge_hw_dma_bd_get_addr(cur_p, phys),
|
|
NIXGE_MAX_JUMBO_FRAME_SIZE,
|
|
DMA_FROM_DEVICE);
|
|
|
|
skb_put(skb, length);
|
|
|
|
skb->protocol = eth_type_trans(skb, ndev);
|
|
skb_checksum_none_assert(skb);
|
|
|
|
/* For now mark them as CHECKSUM_NONE since
|
|
* we don't have offload capabilities
|
|
*/
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
|
|
napi_gro_receive(&priv->napi, skb);
|
|
|
|
size += length;
|
|
packets++;
|
|
|
|
new_skb = netdev_alloc_skb_ip_align(ndev,
|
|
NIXGE_MAX_JUMBO_FRAME_SIZE);
|
|
if (!new_skb)
|
|
return packets;
|
|
|
|
cur_phys = dma_map_single(ndev->dev.parent, new_skb->data,
|
|
NIXGE_MAX_JUMBO_FRAME_SIZE,
|
|
DMA_FROM_DEVICE);
|
|
if (dma_mapping_error(ndev->dev.parent, cur_phys)) {
|
|
/* FIXME: bail out and clean up */
|
|
netdev_err(ndev, "Failed to map ...\n");
|
|
}
|
|
nixge_hw_dma_bd_set_phys(cur_p, cur_phys);
|
|
cur_p->cntrl = NIXGE_MAX_JUMBO_FRAME_SIZE;
|
|
cur_p->status = 0;
|
|
nixge_hw_dma_bd_set_offset(cur_p, new_skb);
|
|
|
|
++priv->rx_bd_ci;
|
|
priv->rx_bd_ci %= RX_BD_NUM;
|
|
cur_p = &priv->rx_bd_v[priv->rx_bd_ci];
|
|
}
|
|
|
|
ndev->stats.rx_packets += packets;
|
|
ndev->stats.rx_bytes += size;
|
|
|
|
if (tail_p)
|
|
nixge_dma_write_desc_reg(priv, XAXIDMA_RX_TDESC_OFFSET, tail_p);
|
|
|
|
return packets;
|
|
}
|
|
|
|
static int nixge_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
struct nixge_priv *priv = container_of(napi, struct nixge_priv, napi);
|
|
int work_done;
|
|
u32 status, cr;
|
|
|
|
work_done = 0;
|
|
|
|
work_done = nixge_recv(priv->ndev, budget);
|
|
if (work_done < budget) {
|
|
napi_complete_done(napi, work_done);
|
|
status = nixge_dma_read_reg(priv, XAXIDMA_RX_SR_OFFSET);
|
|
|
|
if (status & (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK)) {
|
|
/* If there's more, reschedule, but clear */
|
|
nixge_dma_write_reg(priv, XAXIDMA_RX_SR_OFFSET, status);
|
|
napi_reschedule(napi);
|
|
} else {
|
|
/* if not, turn on RX IRQs again ... */
|
|
cr = nixge_dma_read_reg(priv, XAXIDMA_RX_CR_OFFSET);
|
|
cr |= (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK);
|
|
nixge_dma_write_reg(priv, XAXIDMA_RX_CR_OFFSET, cr);
|
|
}
|
|
}
|
|
|
|
return work_done;
|
|
}
|
|
|
|
static irqreturn_t nixge_tx_irq(int irq, void *_ndev)
|
|
{
|
|
struct nixge_priv *priv = netdev_priv(_ndev);
|
|
struct net_device *ndev = _ndev;
|
|
unsigned int status;
|
|
dma_addr_t phys;
|
|
u32 cr;
|
|
|
|
status = nixge_dma_read_reg(priv, XAXIDMA_TX_SR_OFFSET);
|
|
if (status & (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK)) {
|
|
nixge_dma_write_reg(priv, XAXIDMA_TX_SR_OFFSET, status);
|
|
nixge_start_xmit_done(priv->ndev);
|
|
goto out;
|
|
}
|
|
if (!(status & XAXIDMA_IRQ_ALL_MASK)) {
|
|
netdev_err(ndev, "No interrupts asserted in Tx path\n");
|
|
return IRQ_NONE;
|
|
}
|
|
if (status & XAXIDMA_IRQ_ERROR_MASK) {
|
|
phys = nixge_hw_dma_bd_get_addr(&priv->tx_bd_v[priv->tx_bd_ci],
|
|
phys);
|
|
|
|
netdev_err(ndev, "DMA Tx error 0x%x\n", status);
|
|
netdev_err(ndev, "Current BD is at: 0x%llx\n", (u64)phys);
|
|
|
|
cr = nixge_dma_read_reg(priv, XAXIDMA_TX_CR_OFFSET);
|
|
/* Disable coalesce, delay timer and error interrupts */
|
|
cr &= (~XAXIDMA_IRQ_ALL_MASK);
|
|
/* Write to the Tx channel control register */
|
|
nixge_dma_write_reg(priv, XAXIDMA_TX_CR_OFFSET, cr);
|
|
|
|
cr = nixge_dma_read_reg(priv, XAXIDMA_RX_CR_OFFSET);
|
|
/* Disable coalesce, delay timer and error interrupts */
|
|
cr &= (~XAXIDMA_IRQ_ALL_MASK);
|
|
/* Write to the Rx channel control register */
|
|
nixge_dma_write_reg(priv, XAXIDMA_RX_CR_OFFSET, cr);
|
|
|
|
tasklet_schedule(&priv->dma_err_tasklet);
|
|
nixge_dma_write_reg(priv, XAXIDMA_TX_SR_OFFSET, status);
|
|
}
|
|
out:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t nixge_rx_irq(int irq, void *_ndev)
|
|
{
|
|
struct nixge_priv *priv = netdev_priv(_ndev);
|
|
struct net_device *ndev = _ndev;
|
|
unsigned int status;
|
|
dma_addr_t phys;
|
|
u32 cr;
|
|
|
|
status = nixge_dma_read_reg(priv, XAXIDMA_RX_SR_OFFSET);
|
|
if (status & (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK)) {
|
|
/* Turn of IRQs because NAPI */
|
|
nixge_dma_write_reg(priv, XAXIDMA_RX_SR_OFFSET, status);
|
|
cr = nixge_dma_read_reg(priv, XAXIDMA_RX_CR_OFFSET);
|
|
cr &= ~(XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK);
|
|
nixge_dma_write_reg(priv, XAXIDMA_RX_CR_OFFSET, cr);
|
|
|
|
if (napi_schedule_prep(&priv->napi))
|
|
__napi_schedule(&priv->napi);
|
|
goto out;
|
|
}
|
|
if (!(status & XAXIDMA_IRQ_ALL_MASK)) {
|
|
netdev_err(ndev, "No interrupts asserted in Rx path\n");
|
|
return IRQ_NONE;
|
|
}
|
|
if (status & XAXIDMA_IRQ_ERROR_MASK) {
|
|
phys = nixge_hw_dma_bd_get_addr(&priv->rx_bd_v[priv->rx_bd_ci],
|
|
phys);
|
|
netdev_err(ndev, "DMA Rx error 0x%x\n", status);
|
|
netdev_err(ndev, "Current BD is at: 0x%llx\n", (u64)phys);
|
|
|
|
cr = nixge_dma_read_reg(priv, XAXIDMA_TX_CR_OFFSET);
|
|
/* Disable coalesce, delay timer and error interrupts */
|
|
cr &= (~XAXIDMA_IRQ_ALL_MASK);
|
|
/* Finally write to the Tx channel control register */
|
|
nixge_dma_write_reg(priv, XAXIDMA_TX_CR_OFFSET, cr);
|
|
|
|
cr = nixge_dma_read_reg(priv, XAXIDMA_RX_CR_OFFSET);
|
|
/* Disable coalesce, delay timer and error interrupts */
|
|
cr &= (~XAXIDMA_IRQ_ALL_MASK);
|
|
/* write to the Rx channel control register */
|
|
nixge_dma_write_reg(priv, XAXIDMA_RX_CR_OFFSET, cr);
|
|
|
|
tasklet_schedule(&priv->dma_err_tasklet);
|
|
nixge_dma_write_reg(priv, XAXIDMA_RX_SR_OFFSET, status);
|
|
}
|
|
out:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void nixge_dma_err_handler(unsigned long data)
|
|
{
|
|
struct nixge_priv *lp = (struct nixge_priv *)data;
|
|
struct nixge_hw_dma_bd *cur_p;
|
|
struct nixge_tx_skb *tx_skb;
|
|
u32 cr, i;
|
|
|
|
__nixge_device_reset(lp, XAXIDMA_TX_CR_OFFSET);
|
|
__nixge_device_reset(lp, XAXIDMA_RX_CR_OFFSET);
|
|
|
|
for (i = 0; i < TX_BD_NUM; i++) {
|
|
cur_p = &lp->tx_bd_v[i];
|
|
tx_skb = &lp->tx_skb[i];
|
|
nixge_tx_skb_unmap(lp, tx_skb);
|
|
|
|
nixge_hw_dma_bd_set_phys(cur_p, 0);
|
|
cur_p->cntrl = 0;
|
|
cur_p->status = 0;
|
|
nixge_hw_dma_bd_set_offset(cur_p, 0);
|
|
}
|
|
|
|
for (i = 0; i < RX_BD_NUM; i++) {
|
|
cur_p = &lp->rx_bd_v[i];
|
|
cur_p->status = 0;
|
|
}
|
|
|
|
lp->tx_bd_ci = 0;
|
|
lp->tx_bd_tail = 0;
|
|
lp->rx_bd_ci = 0;
|
|
|
|
/* Start updating the Rx channel control register */
|
|
cr = nixge_dma_read_reg(lp, XAXIDMA_RX_CR_OFFSET);
|
|
/* Update the interrupt coalesce count */
|
|
cr = ((cr & ~XAXIDMA_COALESCE_MASK) |
|
|
(XAXIDMA_DFT_RX_THRESHOLD << XAXIDMA_COALESCE_SHIFT));
|
|
/* Update the delay timer count */
|
|
cr = ((cr & ~XAXIDMA_DELAY_MASK) |
|
|
(XAXIDMA_DFT_RX_WAITBOUND << XAXIDMA_DELAY_SHIFT));
|
|
/* Enable coalesce, delay timer and error interrupts */
|
|
cr |= XAXIDMA_IRQ_ALL_MASK;
|
|
/* Finally write to the Rx channel control register */
|
|
nixge_dma_write_reg(lp, XAXIDMA_RX_CR_OFFSET, cr);
|
|
|
|
/* Start updating the Tx channel control register */
|
|
cr = nixge_dma_read_reg(lp, XAXIDMA_TX_CR_OFFSET);
|
|
/* Update the interrupt coalesce count */
|
|
cr = (((cr & ~XAXIDMA_COALESCE_MASK)) |
|
|
(XAXIDMA_DFT_TX_THRESHOLD << XAXIDMA_COALESCE_SHIFT));
|
|
/* Update the delay timer count */
|
|
cr = (((cr & ~XAXIDMA_DELAY_MASK)) |
|
|
(XAXIDMA_DFT_TX_WAITBOUND << XAXIDMA_DELAY_SHIFT));
|
|
/* Enable coalesce, delay timer and error interrupts */
|
|
cr |= XAXIDMA_IRQ_ALL_MASK;
|
|
/* Finally write to the Tx channel control register */
|
|
nixge_dma_write_reg(lp, XAXIDMA_TX_CR_OFFSET, cr);
|
|
|
|
/* Populate the tail pointer and bring the Rx Axi DMA engine out of
|
|
* halted state. This will make the Rx side ready for reception.
|
|
*/
|
|
nixge_dma_write_desc_reg(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p);
|
|
cr = nixge_dma_read_reg(lp, XAXIDMA_RX_CR_OFFSET);
|
|
nixge_dma_write_reg(lp, XAXIDMA_RX_CR_OFFSET,
|
|
cr | XAXIDMA_CR_RUNSTOP_MASK);
|
|
nixge_dma_write_desc_reg(lp, XAXIDMA_RX_TDESC_OFFSET, lp->rx_bd_p +
|
|
(sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1)));
|
|
|
|
/* Write to the RS (Run-stop) bit in the Tx channel control register.
|
|
* Tx channel is now ready to run. But only after we write to the
|
|
* tail pointer register that the Tx channel will start transmitting
|
|
*/
|
|
nixge_dma_write_desc_reg(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p);
|
|
cr = nixge_dma_read_reg(lp, XAXIDMA_TX_CR_OFFSET);
|
|
nixge_dma_write_reg(lp, XAXIDMA_TX_CR_OFFSET,
|
|
cr | XAXIDMA_CR_RUNSTOP_MASK);
|
|
}
|
|
|
|
static int nixge_open(struct net_device *ndev)
|
|
{
|
|
struct nixge_priv *priv = netdev_priv(ndev);
|
|
struct phy_device *phy;
|
|
int ret;
|
|
|
|
nixge_device_reset(ndev);
|
|
|
|
phy = of_phy_connect(ndev, priv->phy_node,
|
|
&nixge_handle_link_change, 0, priv->phy_mode);
|
|
if (!phy)
|
|
return -ENODEV;
|
|
|
|
phy_start(phy);
|
|
|
|
/* Enable tasklets for Axi DMA error handling */
|
|
tasklet_init(&priv->dma_err_tasklet, nixge_dma_err_handler,
|
|
(unsigned long)priv);
|
|
|
|
napi_enable(&priv->napi);
|
|
|
|
/* Enable interrupts for Axi DMA Tx */
|
|
ret = request_irq(priv->tx_irq, nixge_tx_irq, 0, ndev->name, ndev);
|
|
if (ret)
|
|
goto err_tx_irq;
|
|
/* Enable interrupts for Axi DMA Rx */
|
|
ret = request_irq(priv->rx_irq, nixge_rx_irq, 0, ndev->name, ndev);
|
|
if (ret)
|
|
goto err_rx_irq;
|
|
|
|
netif_start_queue(ndev);
|
|
|
|
return 0;
|
|
|
|
err_rx_irq:
|
|
free_irq(priv->tx_irq, ndev);
|
|
err_tx_irq:
|
|
phy_stop(phy);
|
|
phy_disconnect(phy);
|
|
tasklet_kill(&priv->dma_err_tasklet);
|
|
netdev_err(ndev, "request_irq() failed\n");
|
|
return ret;
|
|
}
|
|
|
|
static int nixge_stop(struct net_device *ndev)
|
|
{
|
|
struct nixge_priv *priv = netdev_priv(ndev);
|
|
u32 cr;
|
|
|
|
netif_stop_queue(ndev);
|
|
napi_disable(&priv->napi);
|
|
|
|
if (ndev->phydev) {
|
|
phy_stop(ndev->phydev);
|
|
phy_disconnect(ndev->phydev);
|
|
}
|
|
|
|
cr = nixge_dma_read_reg(priv, XAXIDMA_RX_CR_OFFSET);
|
|
nixge_dma_write_reg(priv, XAXIDMA_RX_CR_OFFSET,
|
|
cr & (~XAXIDMA_CR_RUNSTOP_MASK));
|
|
cr = nixge_dma_read_reg(priv, XAXIDMA_TX_CR_OFFSET);
|
|
nixge_dma_write_reg(priv, XAXIDMA_TX_CR_OFFSET,
|
|
cr & (~XAXIDMA_CR_RUNSTOP_MASK));
|
|
|
|
tasklet_kill(&priv->dma_err_tasklet);
|
|
|
|
free_irq(priv->tx_irq, ndev);
|
|
free_irq(priv->rx_irq, ndev);
|
|
|
|
nixge_hw_dma_bd_release(ndev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nixge_change_mtu(struct net_device *ndev, int new_mtu)
|
|
{
|
|
if (netif_running(ndev))
|
|
return -EBUSY;
|
|
|
|
if ((new_mtu + NIXGE_HDR_SIZE + NIXGE_TRL_SIZE) >
|
|
NIXGE_MAX_JUMBO_FRAME_SIZE)
|
|
return -EINVAL;
|
|
|
|
ndev->mtu = new_mtu;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static s32 __nixge_hw_set_mac_address(struct net_device *ndev)
|
|
{
|
|
struct nixge_priv *priv = netdev_priv(ndev);
|
|
|
|
nixge_ctrl_write_reg(priv, NIXGE_REG_MAC_LSB,
|
|
(ndev->dev_addr[2]) << 24 |
|
|
(ndev->dev_addr[3] << 16) |
|
|
(ndev->dev_addr[4] << 8) |
|
|
(ndev->dev_addr[5] << 0));
|
|
|
|
nixge_ctrl_write_reg(priv, NIXGE_REG_MAC_MSB,
|
|
(ndev->dev_addr[1] | (ndev->dev_addr[0] << 8)));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nixge_net_set_mac_address(struct net_device *ndev, void *p)
|
|
{
|
|
int err;
|
|
|
|
err = eth_mac_addr(ndev, p);
|
|
if (!err)
|
|
__nixge_hw_set_mac_address(ndev);
|
|
|
|
return err;
|
|
}
|
|
|
|
static const struct net_device_ops nixge_netdev_ops = {
|
|
.ndo_open = nixge_open,
|
|
.ndo_stop = nixge_stop,
|
|
.ndo_start_xmit = nixge_start_xmit,
|
|
.ndo_change_mtu = nixge_change_mtu,
|
|
.ndo_set_mac_address = nixge_net_set_mac_address,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
};
|
|
|
|
static void nixge_ethtools_get_drvinfo(struct net_device *ndev,
|
|
struct ethtool_drvinfo *ed)
|
|
{
|
|
strlcpy(ed->driver, "nixge", sizeof(ed->driver));
|
|
strlcpy(ed->bus_info, "platform", sizeof(ed->driver));
|
|
}
|
|
|
|
static int nixge_ethtools_get_coalesce(struct net_device *ndev,
|
|
struct ethtool_coalesce *ecoalesce)
|
|
{
|
|
struct nixge_priv *priv = netdev_priv(ndev);
|
|
u32 regval = 0;
|
|
|
|
regval = nixge_dma_read_reg(priv, XAXIDMA_RX_CR_OFFSET);
|
|
ecoalesce->rx_max_coalesced_frames = (regval & XAXIDMA_COALESCE_MASK)
|
|
>> XAXIDMA_COALESCE_SHIFT;
|
|
regval = nixge_dma_read_reg(priv, XAXIDMA_TX_CR_OFFSET);
|
|
ecoalesce->tx_max_coalesced_frames = (regval & XAXIDMA_COALESCE_MASK)
|
|
>> XAXIDMA_COALESCE_SHIFT;
|
|
return 0;
|
|
}
|
|
|
|
static int nixge_ethtools_set_coalesce(struct net_device *ndev,
|
|
struct ethtool_coalesce *ecoalesce)
|
|
{
|
|
struct nixge_priv *priv = netdev_priv(ndev);
|
|
|
|
if (netif_running(ndev)) {
|
|
netdev_err(ndev,
|
|
"Please stop netif before applying configuration\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (ecoalesce->rx_coalesce_usecs ||
|
|
ecoalesce->rx_coalesce_usecs_irq ||
|
|
ecoalesce->rx_max_coalesced_frames_irq ||
|
|
ecoalesce->tx_coalesce_usecs ||
|
|
ecoalesce->tx_coalesce_usecs_irq ||
|
|
ecoalesce->tx_max_coalesced_frames_irq ||
|
|
ecoalesce->stats_block_coalesce_usecs ||
|
|
ecoalesce->use_adaptive_rx_coalesce ||
|
|
ecoalesce->use_adaptive_tx_coalesce ||
|
|
ecoalesce->pkt_rate_low ||
|
|
ecoalesce->rx_coalesce_usecs_low ||
|
|
ecoalesce->rx_max_coalesced_frames_low ||
|
|
ecoalesce->tx_coalesce_usecs_low ||
|
|
ecoalesce->tx_max_coalesced_frames_low ||
|
|
ecoalesce->pkt_rate_high ||
|
|
ecoalesce->rx_coalesce_usecs_high ||
|
|
ecoalesce->rx_max_coalesced_frames_high ||
|
|
ecoalesce->tx_coalesce_usecs_high ||
|
|
ecoalesce->tx_max_coalesced_frames_high ||
|
|
ecoalesce->rate_sample_interval)
|
|
return -EOPNOTSUPP;
|
|
if (ecoalesce->rx_max_coalesced_frames)
|
|
priv->coalesce_count_rx = ecoalesce->rx_max_coalesced_frames;
|
|
if (ecoalesce->tx_max_coalesced_frames)
|
|
priv->coalesce_count_tx = ecoalesce->tx_max_coalesced_frames;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nixge_ethtools_set_phys_id(struct net_device *ndev,
|
|
enum ethtool_phys_id_state state)
|
|
{
|
|
struct nixge_priv *priv = netdev_priv(ndev);
|
|
u32 ctrl;
|
|
|
|
ctrl = nixge_ctrl_read_reg(priv, NIXGE_REG_LED_CTL);
|
|
switch (state) {
|
|
case ETHTOOL_ID_ACTIVE:
|
|
ctrl |= NIXGE_ID_LED_CTL_EN;
|
|
/* Enable identification LED override*/
|
|
nixge_ctrl_write_reg(priv, NIXGE_REG_LED_CTL, ctrl);
|
|
return 2;
|
|
|
|
case ETHTOOL_ID_ON:
|
|
ctrl |= NIXGE_ID_LED_CTL_VAL;
|
|
nixge_ctrl_write_reg(priv, NIXGE_REG_LED_CTL, ctrl);
|
|
break;
|
|
|
|
case ETHTOOL_ID_OFF:
|
|
ctrl &= ~NIXGE_ID_LED_CTL_VAL;
|
|
nixge_ctrl_write_reg(priv, NIXGE_REG_LED_CTL, ctrl);
|
|
break;
|
|
|
|
case ETHTOOL_ID_INACTIVE:
|
|
/* Restore LED settings */
|
|
ctrl &= ~NIXGE_ID_LED_CTL_EN;
|
|
nixge_ctrl_write_reg(priv, NIXGE_REG_LED_CTL, ctrl);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct ethtool_ops nixge_ethtool_ops = {
|
|
.get_drvinfo = nixge_ethtools_get_drvinfo,
|
|
.get_coalesce = nixge_ethtools_get_coalesce,
|
|
.set_coalesce = nixge_ethtools_set_coalesce,
|
|
.set_phys_id = nixge_ethtools_set_phys_id,
|
|
.get_link_ksettings = phy_ethtool_get_link_ksettings,
|
|
.set_link_ksettings = phy_ethtool_set_link_ksettings,
|
|
.get_link = ethtool_op_get_link,
|
|
};
|
|
|
|
static int nixge_mdio_read(struct mii_bus *bus, int phy_id, int reg)
|
|
{
|
|
struct nixge_priv *priv = bus->priv;
|
|
u32 status, tmp;
|
|
int err;
|
|
u16 device;
|
|
|
|
if (reg & MII_ADDR_C45) {
|
|
device = (reg >> 16) & 0x1f;
|
|
|
|
nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_ADDR, reg & 0xffff);
|
|
|
|
tmp = NIXGE_MDIO_CLAUSE45 | NIXGE_MDIO_OP(NIXGE_MDIO_OP_ADDRESS)
|
|
| NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
|
|
|
|
nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
|
|
nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1);
|
|
|
|
err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
|
|
!status, 10, 1000);
|
|
if (err) {
|
|
dev_err(priv->dev, "timeout setting address");
|
|
return err;
|
|
}
|
|
|
|
tmp = NIXGE_MDIO_CLAUSE45 | NIXGE_MDIO_OP(NIXGE_MDIO_C45_READ) |
|
|
NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
|
|
} else {
|
|
device = reg & 0x1f;
|
|
|
|
tmp = NIXGE_MDIO_CLAUSE22 | NIXGE_MDIO_OP(NIXGE_MDIO_C22_READ) |
|
|
NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
|
|
}
|
|
|
|
nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
|
|
nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1);
|
|
|
|
err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
|
|
!status, 10, 1000);
|
|
if (err) {
|
|
dev_err(priv->dev, "timeout setting read command");
|
|
return err;
|
|
}
|
|
|
|
status = nixge_ctrl_read_reg(priv, NIXGE_REG_MDIO_DATA);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int nixge_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
|
|
{
|
|
struct nixge_priv *priv = bus->priv;
|
|
u32 status, tmp;
|
|
u16 device;
|
|
int err;
|
|
|
|
if (reg & MII_ADDR_C45) {
|
|
device = (reg >> 16) & 0x1f;
|
|
|
|
nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_ADDR, reg & 0xffff);
|
|
|
|
tmp = NIXGE_MDIO_CLAUSE45 | NIXGE_MDIO_OP(NIXGE_MDIO_OP_ADDRESS)
|
|
| NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
|
|
|
|
nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
|
|
nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1);
|
|
|
|
err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
|
|
!status, 10, 1000);
|
|
if (err) {
|
|
dev_err(priv->dev, "timeout setting address");
|
|
return err;
|
|
}
|
|
|
|
tmp = NIXGE_MDIO_CLAUSE45 | NIXGE_MDIO_OP(NIXGE_MDIO_C45_WRITE)
|
|
| NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
|
|
|
|
nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_DATA, val);
|
|
nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
|
|
err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
|
|
!status, 10, 1000);
|
|
if (err)
|
|
dev_err(priv->dev, "timeout setting write command");
|
|
} else {
|
|
device = reg & 0x1f;
|
|
|
|
tmp = NIXGE_MDIO_CLAUSE22 |
|
|
NIXGE_MDIO_OP(NIXGE_MDIO_C22_WRITE) |
|
|
NIXGE_MDIO_ADDR(phy_id) | NIXGE_MDIO_MMD(device);
|
|
|
|
nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_DATA, val);
|
|
nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_OP, tmp);
|
|
nixge_ctrl_write_reg(priv, NIXGE_REG_MDIO_CTRL, 1);
|
|
|
|
err = nixge_ctrl_poll_timeout(priv, NIXGE_REG_MDIO_CTRL, status,
|
|
!status, 10, 1000);
|
|
if (err)
|
|
dev_err(priv->dev, "timeout setting write command");
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int nixge_mdio_setup(struct nixge_priv *priv, struct device_node *np)
|
|
{
|
|
struct mii_bus *bus;
|
|
|
|
bus = devm_mdiobus_alloc(priv->dev);
|
|
if (!bus)
|
|
return -ENOMEM;
|
|
|
|
snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(priv->dev));
|
|
bus->priv = priv;
|
|
bus->name = "nixge_mii_bus";
|
|
bus->read = nixge_mdio_read;
|
|
bus->write = nixge_mdio_write;
|
|
bus->parent = priv->dev;
|
|
|
|
priv->mii_bus = bus;
|
|
|
|
return of_mdiobus_register(bus, np);
|
|
}
|
|
|
|
static void *nixge_get_nvmem_address(struct device *dev)
|
|
{
|
|
struct nvmem_cell *cell;
|
|
size_t cell_size;
|
|
char *mac;
|
|
|
|
cell = nvmem_cell_get(dev, "address");
|
|
if (IS_ERR(cell))
|
|
return NULL;
|
|
|
|
mac = nvmem_cell_read(cell, &cell_size);
|
|
nvmem_cell_put(cell);
|
|
|
|
return mac;
|
|
}
|
|
|
|
static int nixge_probe(struct platform_device *pdev)
|
|
{
|
|
struct nixge_priv *priv;
|
|
struct net_device *ndev;
|
|
struct resource *dmares;
|
|
const u8 *mac_addr;
|
|
int err;
|
|
|
|
ndev = alloc_etherdev(sizeof(*priv));
|
|
if (!ndev)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, ndev);
|
|
SET_NETDEV_DEV(ndev, &pdev->dev);
|
|
|
|
ndev->features = NETIF_F_SG;
|
|
ndev->netdev_ops = &nixge_netdev_ops;
|
|
ndev->ethtool_ops = &nixge_ethtool_ops;
|
|
|
|
/* MTU range: 64 - 9000 */
|
|
ndev->min_mtu = 64;
|
|
ndev->max_mtu = NIXGE_JUMBO_MTU;
|
|
|
|
mac_addr = nixge_get_nvmem_address(&pdev->dev);
|
|
if (mac_addr && is_valid_ether_addr(mac_addr)) {
|
|
ether_addr_copy(ndev->dev_addr, mac_addr);
|
|
kfree(mac_addr);
|
|
} else {
|
|
eth_hw_addr_random(ndev);
|
|
}
|
|
|
|
priv = netdev_priv(ndev);
|
|
priv->ndev = ndev;
|
|
priv->dev = &pdev->dev;
|
|
|
|
netif_napi_add(ndev, &priv->napi, nixge_poll, NAPI_POLL_WEIGHT);
|
|
|
|
dmares = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
priv->dma_regs = devm_ioremap_resource(&pdev->dev, dmares);
|
|
if (IS_ERR(priv->dma_regs)) {
|
|
netdev_err(ndev, "failed to map dma regs\n");
|
|
return PTR_ERR(priv->dma_regs);
|
|
}
|
|
priv->ctrl_regs = priv->dma_regs + NIXGE_REG_CTRL_OFFSET;
|
|
__nixge_hw_set_mac_address(ndev);
|
|
|
|
priv->tx_irq = platform_get_irq_byname(pdev, "tx");
|
|
if (priv->tx_irq < 0) {
|
|
netdev_err(ndev, "could not find 'tx' irq");
|
|
return priv->tx_irq;
|
|
}
|
|
|
|
priv->rx_irq = platform_get_irq_byname(pdev, "rx");
|
|
if (priv->rx_irq < 0) {
|
|
netdev_err(ndev, "could not find 'rx' irq");
|
|
return priv->rx_irq;
|
|
}
|
|
|
|
priv->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD;
|
|
priv->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD;
|
|
|
|
err = nixge_mdio_setup(priv, pdev->dev.of_node);
|
|
if (err) {
|
|
netdev_err(ndev, "error registering mdio bus");
|
|
goto free_netdev;
|
|
}
|
|
|
|
priv->phy_mode = of_get_phy_mode(pdev->dev.of_node);
|
|
if (priv->phy_mode < 0) {
|
|
netdev_err(ndev, "not find \"phy-mode\" property\n");
|
|
err = -EINVAL;
|
|
goto unregister_mdio;
|
|
}
|
|
|
|
priv->phy_node = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
|
|
if (!priv->phy_node) {
|
|
netdev_err(ndev, "not find \"phy-handle\" property\n");
|
|
err = -EINVAL;
|
|
goto unregister_mdio;
|
|
}
|
|
|
|
err = register_netdev(priv->ndev);
|
|
if (err) {
|
|
netdev_err(ndev, "register_netdev() error (%i)\n", err);
|
|
goto unregister_mdio;
|
|
}
|
|
|
|
return 0;
|
|
|
|
unregister_mdio:
|
|
mdiobus_unregister(priv->mii_bus);
|
|
|
|
free_netdev:
|
|
free_netdev(ndev);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int nixge_remove(struct platform_device *pdev)
|
|
{
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
struct nixge_priv *priv = netdev_priv(ndev);
|
|
|
|
unregister_netdev(ndev);
|
|
|
|
mdiobus_unregister(priv->mii_bus);
|
|
|
|
free_netdev(ndev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Match table for of_platform binding */
|
|
static const struct of_device_id nixge_dt_ids[] = {
|
|
{ .compatible = "ni,xge-enet-2.00", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, nixge_dt_ids);
|
|
|
|
static struct platform_driver nixge_driver = {
|
|
.probe = nixge_probe,
|
|
.remove = nixge_remove,
|
|
.driver = {
|
|
.name = "nixge",
|
|
.of_match_table = of_match_ptr(nixge_dt_ids),
|
|
},
|
|
};
|
|
module_platform_driver(nixge_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("National Instruments XGE Management MAC");
|
|
MODULE_AUTHOR("Moritz Fischer <mdf@kernel.org>");
|