linux/arch/arm/Kconfig.debug
Linus Torvalds 42daabf62b ARM SoC late changes
These are changes that arrived a little late before the merge
 window or that have multiple dependencies on previous branches
 so they did not fit into one of the earlier ones. There
 are 10 branches merged here, a total of 39 non-merge commits.
 Contents are a mixed bag for the above reasons:
 
 * Two new SoC platforms: ST microelectronics stixxxx and
   the TI 'Nspire' graphing calculator. These should have
   been in the 'soc' branch but were a little late
 * Support for the Exynos 5420 variant in mach-exynos,
   which is based on the other exynos branches to avoid
   conflicts.
 * Various small changes for sh-mobile, ux500 and davinci
 * Common clk support for MSM
 
 Conflicts:
 * In Kconfig.debug, various additions trivially conflict,
   the list should be kept in alphabetical order when
   resolving.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUdLnl2CrR//JCVInAQIrKhAAwvtsGNe6j9nDuLEitWtQAmhHYZQyUJ8k
 o9j/1j1CqhE8C0bLRud8D4m1GxfxbGeRm2d0HoNbxda3FmntUufqBDi6neMiQiLO
 VltC5rOYL8Mday0Asc3SBfjBj8SZC2bypicKy5zUfzsObCBt343g1WvYffMDNmwH
 FveOQK6q2BKmO67cazc9tk5xmxjVwP/LB8r5mQtiXmMguw0R+ZIDDIP6xaURFkxX
 SAElleD2wtvpVHP1d6AKHpXN99u3xV3uoJjKljECEXdBzW/ZX8m7FG2tKY5xy368
 ta0Nhh2MSRnBhUYOH9uah4PQWYEsbZ+M/W+3J9tKRu6q9D/c/AAxILyXUY2tcHNC
 o1UwcUn1druirx3X1AW8HYAGNwW7BD3HANzIiUkQZG7ByfM4qCtUEo2SAFNIGBoR
 v1FMLhMPgMWotZnKrDQQd0anxkKIOFaSMRVgpQLW2jQt/B7sHLmEH2yDffkbSD76
 PQDThnW/dfm9dgeK+X4fPrveIMKbjQlbFz0okN+LPsUf8e1045HBgCi2A0lTIGWM
 kVVgXHKKXi8G8HBa4VyDlORVHXk1bJEheF+zlDvdk4fHkcf+H/OfvFG2O9TdIdpb
 ITXRyyteaRM4YIZpnJbzeeZDZXT89c2ah7xq36iM+L1ScidyntPquViXeasSc8r6
 pKu9ZDc0Mow=
 =cRu2
 -----END PGP SIGNATURE-----

Merge tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late changes from Arnd Bergmann:
 "These are changes that arrived a little late before the merge window
  or that have multiple dependencies on previous branches so they did
  not fit into one of the earlier ones.  There are 10 branches merged
  here, a total of 39 non-merge commits.  Contents are a mixed bag for
  the above reasons:

   * Two new SoC platforms: ST microelectronics stixxxx and the TI
     'Nspire' graphing calculator.  These should have been in the 'soc'
     branch but were a little late
   * Support for the Exynos 5420 variant in mach-exynos, which is based
     on the other exynos branches to avoid conflicts.
   * Various small changes for sh-mobile, ux500 and davinci
   * Common clk support for MSM"

* tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  ARM: ux500: bail out on alien cpus
  ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins
  serial: sh-sci: Initialise variables before access in sci_set_termios()
  ARM: stih41x: Add B2020 board support
  ARM: stih41x: Add B2000 board support
  ARM: sti: Add DEBUG_LL console support
  ARM: sti: Add STiH416 SOC support
  ARM: sti: Add STiH415 SOC support
  ARM: msm: Migrate to common clock framework
  ARM: msm: Make proc_comm clock control into a platform driver
  ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver
  ARM: msm: Remove clock-7x30.h include file
  ARM: msm: Remove custom clk_set_{max,min}_rate() API
  ARM: msm: Remove custom clk_set_flags() API
  msm: iommu: Use clk_set_rate() instead of clk_set_min_rate()
  msm: iommu: Convert to clk_prepare/unprepare
  msm_sdcc: Convert to clk_prepare/unprepare
  usb: otg: msm: Convert to clk_prepare/unprepare
  msm_serial: Use devm_clk_get() and properly return errors
  msm_serial: Convert to clk_prepare/unprepare
  ...
2013-07-02 14:42:51 -07:00

840 lines
26 KiB
Plaintext

menu "Kernel hacking"
source "lib/Kconfig.debug"
config STRICT_DEVMEM
bool "Filter access to /dev/mem"
depends on MMU
---help---
If this option is disabled, you allow userspace (root) access to all
of memory, including kernel and userspace memory. Accidental
access to this is obviously disastrous, but specific access can
be used by people debugging the kernel.
If this option is switched on, the /dev/mem file only allows
userspace access to memory mapped peripherals.
If in doubt, say Y.
# RMK wants arm kernels compiled with frame pointers or stack unwinding.
# If you know what you are doing and are willing to live without stack
# traces, you can get a slightly smaller kernel by setting this option to
# n, but then RMK will have to kill you ;).
config FRAME_POINTER
bool
depends on !THUMB2_KERNEL
default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER
help
If you say N here, the resulting kernel will be slightly smaller and
faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
when a problem occurs with the kernel, the information that is
reported is severely limited.
config ARM_UNWIND
bool "Enable stack unwinding support (EXPERIMENTAL)"
depends on AEABI
default y
help
This option enables stack unwinding support in the kernel
using the information automatically generated by the
compiler. The resulting kernel image is slightly bigger but
the performance is not affected. Currently, this feature
only works with EABI compilers. If unsure say Y.
config OLD_MCOUNT
bool
depends on FUNCTION_TRACER && FRAME_POINTER
default y
config DEBUG_USER
bool "Verbose user fault messages"
help
When a user program crashes due to an exception, the kernel can
print a brief message explaining what the problem was. This is
sometimes helpful for debugging but serves no purpose on a
production system. Most people should say N here.
In addition, you need to pass user_debug=N on the kernel command
line to enable this feature. N consists of the sum of:
1 - undefined instruction events
2 - system calls
4 - invalid data aborts
8 - SIGSEGV faults
16 - SIGBUS faults
# These options are only for real kernel hackers who want to get their hands dirty.
config DEBUG_LL
bool "Kernel low-level debugging functions (read help!)"
depends on DEBUG_KERNEL
help
Say Y here to include definitions of printascii, printch, printhex
in the kernel. This is helpful if you are debugging code that
executes before the console is initialized.
Note that selecting this option will limit the kernel to a single
UART definition, as specified below. Attempting to boot the kernel
image on a different platform *will not work*, so this option should
not be enabled for kernels that are intended to be portable.
choice
prompt "Kernel low-level debugging port"
depends on DEBUG_LL
config AT91_DEBUG_LL_DBGU0
bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
depends on HAVE_AT91_DBGU0
config AT91_DEBUG_LL_DBGU1
bool "Kernel low-level debugging on 9263 and 9g45"
depends on HAVE_AT91_DBGU1
config DEBUG_BCM2835
bool "Kernel low-level debugging on BCM2835 PL011 UART"
depends on ARCH_BCM2835
config DEBUG_CLPS711X_UART1
bool "Kernel low-level debugging messages via UART1"
depends on ARCH_CLPS711X
help
Say Y here if you want the debug print routines to direct
their output to the first serial port on these devices.
config DEBUG_CLPS711X_UART2
bool "Kernel low-level debugging messages via UART2"
depends on ARCH_CLPS711X
help
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
config DEBUG_CNS3XXX
bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
depends on ARCH_CNS3XXX
help
Say Y here if you want the debug print routines to direct
their output to the CNS3xxx UART0.
config DEBUG_DAVINCI_DA8XX_UART1
bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
depends on ARCH_DAVINCI_DA8XX
help
Say Y here if you want the debug print routines to direct
their output to UART1 serial port on DaVinci DA8XX devices.
config DEBUG_DAVINCI_DA8XX_UART2
bool "Kernel low-level debugging on DaVinci DA8XX using UART2"
depends on ARCH_DAVINCI_DA8XX
help
Say Y here if you want the debug print routines to direct
their output to UART2 serial port on DaVinci DA8XX devices.
config DEBUG_DAVINCI_DMx_UART0
bool "Kernel low-level debugging on DaVinci DMx using UART0"
depends on ARCH_DAVINCI_DMx
help
Say Y here if you want the debug print routines to direct
their output to UART0 serial port on DaVinci DMx devices.
config DEBUG_DAVINCI_TNETV107X_UART1
bool "Kernel low-level debugging on DaVinci TNETV107x using UART1"
depends on ARCH_DAVINCI_TNETV107X
help
Say Y here if you want the debug print routines to direct
their output to UART1 serial port on DaVinci TNETV107X
devices.
config DEBUG_ZYNQ_UART0
bool "Kernel low-level debugging on Xilinx Zynq using UART0"
depends on ARCH_ZYNQ
help
Say Y here if you want the debug print routines to direct
their output to UART0 on the Zynq platform.
config DEBUG_ZYNQ_UART1
bool "Kernel low-level debugging on Xilinx Zynq using UART1"
depends on ARCH_ZYNQ
help
Say Y here if you want the debug print routines to direct
their output to UART1 on the Zynq platform.
If you have a ZC702 board and want early boot messages to
appear on the USB serial adaptor, select this option.
config DEBUG_DC21285_PORT
bool "Kernel low-level debugging messages via footbridge serial port"
depends on FOOTBRIDGE
help
Say Y here if you want the debug print routines to direct
their output to the serial port in the DC21285 (Footbridge).
config DEBUG_FOOTBRIDGE_COM1
bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
depends on FOOTBRIDGE
help
Say Y here if you want the debug print routines to direct
their output to the 8250 at PCI COM1.
config DEBUG_HIGHBANK_UART
bool "Kernel low-level debugging messages via Highbank UART"
depends on ARCH_HIGHBANK
help
Say Y here if you want the debug print routines to direct
their output to the UART on Highbank based devices.
config DEBUG_IMX1_UART
bool "i.MX1 Debug UART"
depends on SOC_IMX1
help
Say Y here if you want kernel low-level debugging support
on i.MX1.
config DEBUG_IMX23_UART
bool "i.MX23 Debug UART"
depends on SOC_IMX23
help
Say Y here if you want kernel low-level debugging support
on i.MX23.
config DEBUG_IMX25_UART
bool "i.MX25 Debug UART"
depends on SOC_IMX25
help
Say Y here if you want kernel low-level debugging support
on i.MX25.
config DEBUG_IMX21_IMX27_UART
bool "i.MX21 and i.MX27 Debug UART"
depends on SOC_IMX21 || SOC_IMX27
help
Say Y here if you want kernel low-level debugging support
on i.MX21 or i.MX27.
config DEBUG_IMX28_UART
bool "i.MX28 Debug UART"
depends on SOC_IMX28
help
Say Y here if you want kernel low-level debugging support
on i.MX28.
config DEBUG_IMX31_UART
bool "i.MX31 Debug UART"
depends on SOC_IMX31
help
Say Y here if you want kernel low-level debugging support
on i.MX31.
config DEBUG_IMX35_UART
bool "i.MX35 Debug UART"
depends on SOC_IMX35
help
Say Y here if you want kernel low-level debugging support
on i.MX35.
config DEBUG_IMX51_UART
bool "i.MX51 Debug UART"
depends on SOC_IMX51
help
Say Y here if you want kernel low-level debugging support
on i.MX51.
config DEBUG_IMX53_UART
bool "i.MX53 Debug UART"
depends on SOC_IMX53
help
Say Y here if you want kernel low-level debugging support
on i.MX53.
config DEBUG_IMX6Q_UART
bool "i.MX6Q/DL Debug UART"
depends on SOC_IMX6Q
help
Say Y here if you want kernel low-level debugging support
on i.MX6Q/DL.
config DEBUG_IMX6SL_UART
bool "i.MX6SL Debug UART"
depends on SOC_IMX6SL
help
Say Y here if you want kernel low-level debugging support
on i.MX6SL.
config DEBUG_KEYSTONE_UART0
bool "Kernel low-level debugging on KEYSTONE2 using UART0"
depends on ARCH_KEYSTONE
help
Say Y here if you want the debug print routines to direct
their output to UART0 serial port on KEYSTONE2 devices.
config DEBUG_KEYSTONE_UART1
bool "Kernel low-level debugging on KEYSTONE2 using UART1"
depends on ARCH_KEYSTONE
help
Say Y here if you want the debug print routines to direct
their output to UART1 serial port on KEYSTONE2 devices.
config DEBUG_MMP_UART2
bool "Kernel low-level debugging message via MMP UART2"
depends on ARCH_MMP
help
Say Y here if you want kernel low-level debugging support
on MMP UART2.
config DEBUG_MMP_UART3
bool "Kernel low-level debugging message via MMP UART3"
depends on ARCH_MMP
help
Say Y here if you want kernel low-level debugging support
on MMP UART3.
config DEBUG_MSM_UART1
bool "Kernel low-level debugging messages via MSM UART1"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
help
Say Y here if you want the debug print routines to direct
their output to the first serial port on MSM devices.
config DEBUG_MSM_UART2
bool "Kernel low-level debugging messages via MSM UART2"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
help
Say Y here if you want the debug print routines to direct
their output to the second serial port on MSM devices.
config DEBUG_MSM_UART3
bool "Kernel low-level debugging messages via MSM UART3"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
help
Say Y here if you want the debug print routines to direct
their output to the third serial port on MSM devices.
config DEBUG_MSM8660_UART
bool "Kernel low-level debugging messages via MSM 8660 UART"
depends on ARCH_MSM8X60
select MSM_HAS_DEBUG_UART_HS
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8660 devices.
config DEBUG_MSM8960_UART
bool "Kernel low-level debugging messages via MSM 8960 UART"
depends on ARCH_MSM8960
select MSM_HAS_DEBUG_UART_HS
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8960 devices.
config DEBUG_MVEBU_UART
bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)"
depends on ARCH_MVEBU
help
Say Y here if you want kernel low-level debugging support
on MVEBU based platforms.
This option should be used with the old bootloaders
that left the internal registers mapped at
0xd0000000. As of today, this is the case on
platforms such as the Globalscale Mirabox or the
Plathome OpenBlocks AX3, when using the original
bootloader.
If the wrong DEBUG_MVEBU_UART* option is selected,
when u-boot hands over to the kernel, the system
silently crashes, with no serial output at all.
config DEBUG_MVEBU_UART_ALTERNATE
bool "Kernel low-level debugging messages via MVEBU UART (new bootloaders)"
depends on ARCH_MVEBU
help
Say Y here if you want kernel low-level debugging support
on MVEBU based platforms.
This option should be used with the new bootloaders
that remap the internal registers at 0xf1000000.
If the wrong DEBUG_MVEBU_UART* option is selected,
when u-boot hands over to the kernel, the system
silently crashes, with no serial output at all.
config DEBUG_NOMADIK_UART
bool "Kernel low-level debugging messages via NOMADIK UART"
depends on ARCH_NOMADIK
help
Say Y here if you want kernel low-level debugging support
on NOMADIK based platforms.
config DEBUG_NSPIRE_CLASSIC_UART
bool "Kernel low-level debugging via TI-NSPIRE 8250 UART"
depends on ARCH_NSPIRE
help
Say Y here if you want kernel low-level debugging support
on TI-NSPIRE classic models.
config DEBUG_NSPIRE_CX_UART
bool "Kernel low-level debugging via TI-NSPIRE PL011 UART"
depends on ARCH_NSPIRE
help
Say Y here if you want kernel low-level debugging support
on TI-NSPIRE CX models.
config DEBUG_OMAP2PLUS_UART
bool "Kernel low-level debugging messages via OMAP2PLUS UART"
depends on ARCH_OMAP2PLUS
help
Say Y here if you want kernel low-level debugging support
on OMAP2PLUS based platforms.
config DEBUG_PICOXCELL_UART
depends on ARCH_PICOXCELL
bool "Use PicoXcell UART for low-level debug"
help
Say Y here if you want kernel low-level debugging support
on PicoXcell based platforms.
config DEBUG_PXA_UART1
depends on ARCH_PXA
bool "Use PXA UART1 for low-level debug"
help
Say Y here if you want kernel low-level debugging support
on PXA UART1.
config DEBUG_REALVIEW_STD_PORT
bool "RealView Default UART"
depends on ARCH_REALVIEW
help
Say Y here if you want the debug print routines to direct
their output to the serial port on RealView EB, PB11MP, PBA8
and PBX platforms.
config DEBUG_REALVIEW_PB1176_PORT
bool "RealView PB1176 UART"
depends on MACH_REALVIEW_PB1176
help
Say Y here if you want the debug print routines to direct
their output to the standard serial port on the RealView
PB1176 platform.
config DEBUG_ROCKCHIP_UART
bool "Kernel low-level debugging messages via Rockchip UART"
depends on ARCH_ROCKCHIP
help
Say Y here if you want kernel low-level debugging support
on Rockchip based platforms.
config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
bool "Use S3C UART 0 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 0. The port must have been initialised
by the boot-loader before use.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_S3C_UART1
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
bool "Use S3C UART 1 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 1. The port must have been initialised
by the boot-loader before use.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_S3C_UART2
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
bool "Use S3C UART 2 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 2. The port must have been initialised
by the boot-loader before use.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_S3C_UART3
depends on PLAT_SAMSUNG && ARCH_EXYNOS
select DEBUG_EXYNOS_UART
bool "Use S3C UART 3 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 3. The port must have been initialised
by the boot-loader before use.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_SOCFPGA_UART
depends on ARCH_SOCFPGA
bool "Use SOCFPGA UART for low-level debug"
help
Say Y here if you want kernel low-level debugging support
on SOCFPGA based platforms.
config DEBUG_SUNXI_UART0
bool "Kernel low-level debugging messages via sunXi UART0"
depends on ARCH_SUNXI
help
Say Y here if you want kernel low-level debugging support
on Allwinner A1X based platforms on the UART0.
config DEBUG_SUNXI_UART1
bool "Kernel low-level debugging messages via sunXi UART1"
depends on ARCH_SUNXI
help
Say Y here if you want kernel low-level debugging support
on Allwinner A1X based platforms on the UART1.
config DEBUG_TEGRA_UART
depends on ARCH_TEGRA
bool "Use Tegra UART for low-level debug"
help
Say Y here if you want kernel low-level debugging support
on Tegra based platforms.
config DEBUG_SIRFPRIMA2_UART1
bool "Kernel low-level debugging messages via SiRFprimaII UART1"
depends on ARCH_PRIMA2
help
Say Y here if you want the debug print routines to direct
their output to the uart1 port on SiRFprimaII devices.
config DEBUG_SIRFMARCO_UART1
bool "Kernel low-level debugging messages via SiRFmarco UART1"
depends on ARCH_MARCO
help
Say Y here if you want the debug print routines to direct
their output to the uart1 port on SiRFmarco devices.
config DEBUG_U300_UART
bool "Kernel low-level debugging messages via U300 UART0"
depends on ARCH_U300
help
Say Y here if you want the debug print routines to direct
their output to the uart port on U300 devices.
config DEBUG_UX500_UART
depends on ARCH_U8500
bool "Use Ux500 UART for low-level debug"
help
Say Y here if you want kernel low-level debugging support
on Ux500 based platforms.
config DEBUG_VEXPRESS_UART0_DETECT
bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
depends on ARCH_VEXPRESS && CPU_CP15_MMU
help
This option enables a simple heuristic which tries to determine
the motherboard's memory map variant (original or RS1) and then
choose the relevant UART0 base address.
Note that this will only work with standard A-class core tiles,
and may fail with non-standard SMM or custom software models.
config DEBUG_VEXPRESS_UART0_CA9
bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)"
depends on ARCH_VEXPRESS
help
This option selects UART0 at 0x10009000. Except for custom models,
this applies only to the V2P-CA9 tile.
config DEBUG_VEXPRESS_UART0_RS1
bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)"
depends on ARCH_VEXPRESS
help
This option selects UART0 at 0x1c090000. This applies to most
of the tiles using the RS1 memory map, including all new A-class
core tiles, FPGA-based SMMs and software models.
config DEBUG_VT8500_UART0
bool "Use UART0 on VIA/Wondermedia SoCs"
depends on ARCH_VT8500
help
This option selects UART0 on VIA/Wondermedia System-on-a-chip
devices, including VT8500, WM8505, WM8650 and WM8850.
config DEBUG_STI_UART
depends on ARCH_STI
bool "Use StiH415/416 ASC for low-level debug"
help
Say Y here if you want kernel low-level debugging support
on StiH415/416 based platforms like B2000, B2020.
It support UART2 and SBC_UART1.
If unsure, say N.
config DEBUG_LL_UART_NONE
bool "No low-level debugging UART"
depends on !ARCH_MULTIPLATFORM
help
Say Y here if your platform doesn't provide a UART option
below. This relies on your platform choosing the right UART
definition internally in order for low-level debugging to
work.
config DEBUG_ICEDCC
bool "Kernel low-level debugging via EmbeddedICE DCC channel"
help
Say Y here if you want the debug print routines to direct
their output to the EmbeddedICE macrocell's DCC channel using
co-processor 14. This is known to work on the ARM9 style ICE
channel and on the XScale with the PEEDI.
Note that the system will appear to hang during boot if there
is nothing connected to read from the DCC.
config DEBUG_SEMIHOSTING
bool "Kernel low-level debug output via semihosting I/O"
help
Semihosting enables code running on an ARM target to use
the I/O facilities on a host debugger/emulator through a
simple SVC call. The host debugger or emulator must have
semihosting enabled for the special svc call to be trapped
otherwise the kernel will crash.
This is known to work with OpenOCD, as well as
ARM's Fast Models, or any other controlling environment
that implements semihosting.
For more details about semihosting, please see
chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
endchoice
config DEBUG_EXYNOS_UART
bool
config DEBUG_IMX_UART_PORT
int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
DEBUG_IMX21_IMX27_UART || \
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
DEBUG_IMX51_UART || \
DEBUG_IMX53_UART || \
DEBUG_IMX6Q_UART || \
DEBUG_IMX6SL_UART
default 1
depends on ARCH_MXC
help
Choose UART port on which kernel low-level debug messages
should be output.
choice
prompt "Low-level debug console UART"
depends on DEBUG_OMAP2PLUS_UART
config DEBUG_OMAP2UART1
bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
help
This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
omap3 torpedo and 3530 lv som.
config DEBUG_OMAP2UART2
bool "OMAP2/3/4 UART2"
config DEBUG_OMAP2UART3
bool "OMAP2 UART3 (n8x0)"
config DEBUG_OMAP3UART3
bool "OMAP3 UART3 (most omap3 boards)"
help
This covers at least cm_t3x, beagle, crane, devkit8000,
igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
and 3517evm.
config DEBUG_OMAP4UART3
bool "OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
config DEBUG_OMAP3UART4
bool "OMAP36XX UART4"
config DEBUG_OMAP4UART4
bool "OMAP4/5 UART4"
config DEBUG_TI81XXUART1
bool "TI81XX UART1 (ti8148evm)"
config DEBUG_TI81XXUART2
bool "TI81XX UART2"
config DEBUG_TI81XXUART3
bool "TI81XX UART3 (ti8168evm)"
config DEBUG_AM33XXUART1
bool "AM33XX UART1"
config DEBUG_ZOOM_UART
bool "Zoom2/3 UART"
endchoice
choice
prompt "Low-level debug console UART"
depends on DEBUG_ROCKCHIP_UART
config DEBUG_RK29_UART0
bool "RK29 UART0"
config DEBUG_RK29_UART1
bool "RK29 UART1"
config DEBUG_RK29_UART2
bool "RK29 UART2"
config DEBUG_RK3X_UART0
bool "RK3X UART0"
config DEBUG_RK3X_UART1
bool "RK3X UART1"
config DEBUG_RK3X_UART2
bool "RK3X UART2"
config DEBUG_RK3X_UART3
bool "RK3X UART3"
endchoice
choice
prompt "Low-level debug console UART"
depends on DEBUG_LL && DEBUG_TEGRA_UART
config TEGRA_DEBUG_UART_AUTO_ODMDATA
bool "Via ODMDATA"
help
Automatically determines which UART to use for low-level debug based
on the ODMDATA value. This value is part of the BCT, and is written
to the boot memory device using nvflash, or other flashing tool.
When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
0/1/2/3/4 are UART A/B/C/D/E.
config TEGRA_DEBUG_UARTA
bool "UART A"
config TEGRA_DEBUG_UARTB
bool "UART B"
config TEGRA_DEBUG_UARTC
bool "UART C"
config TEGRA_DEBUG_UARTD
bool "UART D"
config TEGRA_DEBUG_UARTE
bool "UART E"
endchoice
choice
prompt "Low-level debug console UART"
depends on DEBUG_LL && DEBUG_STI_UART
config STIH41X_DEBUG_ASC2
bool "ASC2 UART"
help
Say Y here if you want kernel low-level debugging support
on STiH415/416 based platforms like b2000, which has
default UART wired up to ASC2.
If unsure, say N.
config STIH41X_DEBUG_SBC_ASC1
bool "SBC ASC1 UART"
help
Say Y here if you want kernel low-level debugging support
on STiH415/416 based platforms like b2020. which has
default UART wired up to SBC ASC1.
If unsure, say N.
endchoice
config DEBUG_LL_INCLUDE
string
default "debug/bcm2835.S" if DEBUG_BCM2835
default "debug/cns3xxx.S" if DEBUG_CNS3XXX
default "debug/exynos.S" if DEBUG_EXYNOS_UART
default "debug/highbank.S" if DEBUG_HIGHBANK_UART
default "debug/icedcc.S" if DEBUG_ICEDCC
default "debug/imx.S" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
DEBUG_IMX21_IMX27_UART || \
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
DEBUG_IMX51_UART || \
DEBUG_IMX53_UART ||\
DEBUG_IMX6Q_UART || \
DEBUG_IMX6SL_UART
default "debug/keystone.S" if DEBUG_KEYSTONE_UART0 || \
DEBUG_KEYSTONE_UART1
default "debug/mvebu.S" if DEBUG_MVEBU_UART || \
DEBUG_MVEBU_UART_ALTERNATE
default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART
default "debug/nomadik.S" if DEBUG_NOMADIK_UART
default "debug/nspire.S" if DEBUG_NSPIRE_CX_UART || \
DEBUG_NSPIRE_CLASSIC_UART
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
default "debug/pxa.S" if DEBUG_PXA_UART1 || DEBUG_MMP_UART2 || \
DEBUG_MMP_UART3
default "debug/rockchip.S" if DEBUG_ROCKCHIP_UART
default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
default "debug/sti.S" if DEBUG_STI_UART
default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1
default "debug/tegra.S" if DEBUG_TEGRA_UART
default "debug/u300.S" if DEBUG_U300_UART
default "debug/ux500.S" if DEBUG_UX500_UART
default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
default "debug/vt8500.S" if DEBUG_VT8500_UART0
default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
default "mach/debug-macro.S"
config DEBUG_UNCOMPRESS
bool
default y if ARCH_MULTIPLATFORM && DEBUG_LL && \
!DEBUG_OMAP2PLUS_UART && \
!DEBUG_TEGRA_UART
config UNCOMPRESS_INCLUDE
string
default "debug/uncompress.h" if ARCH_MULTIPLATFORM
default "mach/uncompress.h"
config EARLY_PRINTK
bool "Early printk"
depends on DEBUG_LL
help
Say Y here if you want to have an early console using the
kernel low-level debugging functions. Add earlyprintk to your
kernel parameters to enable this console.
config OC_ETM
bool "On-chip ETM and ETB"
depends on ARM_AMBA
help
Enables the on-chip embedded trace macrocell and embedded trace
buffer driver that will allow you to collect traces of the
kernel code.
config ARM_KPROBES_TEST
tristate "Kprobes test module"
depends on KPROBES && MODULES
help
Perform tests of kprobes API and instruction set simulation.
config PID_IN_CONTEXTIDR
bool "Write the current PID to the CONTEXTIDR register"
depends on CPU_COPY_V6
help
Enabling this option causes the kernel to write the current PID to
the PROCID field of the CONTEXTIDR register, at the expense of some
additional instructions during context switch. Say Y here only if you
are planning to use hardware trace tools with this kernel.
endmenu