mirror of
https://github.com/torvalds/linux.git
synced 2024-12-27 05:11:48 +00:00
e4faafbf5c
- Propagate regulator_get_optional() errors so callers can distinguish real errors from optional regulators that are absent (Thierry Reding) - Propagate devm_of_phy_get() errors so callers can distinguish real errors from optional PHYs that are absent (Thierry Reding) - Add Andrew Murray as PCI native driver reviewer (Lorenzo Pieralisi) * remotes/lorenzo/pci/misc: MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: iproc: Propagate errors for optional PHYs PCI: histb: Propagate errors for optional regulators PCI: armada8x: Propagate errors for optional PHYs PCI: imx6: Propagate errors for optional regulators PCI: exynos: Propagate errors for optional PHYs PCI: rockchip: Propagate errors for optional regulators
1307 lines
34 KiB
C
1307 lines
34 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* PCIe host controller driver for Freescale i.MX6 SoCs
|
|
*
|
|
* Copyright (C) 2013 Kosagi
|
|
* http://www.kosagi.com
|
|
*
|
|
* Author: Sean Cross <xobs@kosagi.com>
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
|
|
#include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/resource.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/types.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/pm_domain.h>
|
|
#include <linux/pm_runtime.h>
|
|
|
|
#include "pcie-designware.h"
|
|
|
|
#define IMX8MQ_GPR_PCIE_REF_USE_PAD BIT(9)
|
|
#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN BIT(10)
|
|
#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE BIT(11)
|
|
#define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE GENMASK(11, 8)
|
|
#define IMX8MQ_PCIE2_BASE_ADDR 0x33c00000
|
|
|
|
#define to_imx6_pcie(x) dev_get_drvdata((x)->dev)
|
|
|
|
enum imx6_pcie_variants {
|
|
IMX6Q,
|
|
IMX6SX,
|
|
IMX6QP,
|
|
IMX7D,
|
|
IMX8MQ,
|
|
};
|
|
|
|
#define IMX6_PCIE_FLAG_IMX6_PHY BIT(0)
|
|
#define IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE BIT(1)
|
|
#define IMX6_PCIE_FLAG_SUPPORTS_SUSPEND BIT(2)
|
|
|
|
struct imx6_pcie_drvdata {
|
|
enum imx6_pcie_variants variant;
|
|
u32 flags;
|
|
int dbi_length;
|
|
};
|
|
|
|
struct imx6_pcie {
|
|
struct dw_pcie *pci;
|
|
int reset_gpio;
|
|
bool gpio_active_high;
|
|
struct clk *pcie_bus;
|
|
struct clk *pcie_phy;
|
|
struct clk *pcie_inbound_axi;
|
|
struct clk *pcie;
|
|
struct clk *pcie_aux;
|
|
struct regmap *iomuxc_gpr;
|
|
u32 controller_id;
|
|
struct reset_control *pciephy_reset;
|
|
struct reset_control *apps_reset;
|
|
struct reset_control *turnoff_reset;
|
|
u32 tx_deemph_gen1;
|
|
u32 tx_deemph_gen2_3p5db;
|
|
u32 tx_deemph_gen2_6db;
|
|
u32 tx_swing_full;
|
|
u32 tx_swing_low;
|
|
int link_gen;
|
|
struct regulator *vpcie;
|
|
void __iomem *phy_base;
|
|
|
|
/* power domain for pcie */
|
|
struct device *pd_pcie;
|
|
/* power domain for pcie phy */
|
|
struct device *pd_pcie_phy;
|
|
const struct imx6_pcie_drvdata *drvdata;
|
|
};
|
|
|
|
/* Parameters for the waiting for PCIe PHY PLL to lock on i.MX7 */
|
|
#define PHY_PLL_LOCK_WAIT_USLEEP_MAX 200
|
|
#define PHY_PLL_LOCK_WAIT_TIMEOUT (2000 * PHY_PLL_LOCK_WAIT_USLEEP_MAX)
|
|
|
|
/* PCIe Root Complex registers (memory-mapped) */
|
|
#define PCIE_RC_IMX6_MSI_CAP 0x50
|
|
#define PCIE_RC_LCR 0x7c
|
|
#define PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1 0x1
|
|
#define PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN2 0x2
|
|
#define PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK 0xf
|
|
|
|
#define PCIE_RC_LCSR 0x80
|
|
|
|
/* PCIe Port Logic registers (memory-mapped) */
|
|
#define PL_OFFSET 0x700
|
|
|
|
#define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
|
|
#define PCIE_PHY_CTRL_DATA(x) FIELD_PREP(GENMASK(15, 0), (x))
|
|
#define PCIE_PHY_CTRL_CAP_ADR BIT(16)
|
|
#define PCIE_PHY_CTRL_CAP_DAT BIT(17)
|
|
#define PCIE_PHY_CTRL_WR BIT(18)
|
|
#define PCIE_PHY_CTRL_RD BIT(19)
|
|
|
|
#define PCIE_PHY_STAT (PL_OFFSET + 0x110)
|
|
#define PCIE_PHY_STAT_ACK BIT(16)
|
|
|
|
#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
|
|
|
|
/* PHY registers (not memory-mapped) */
|
|
#define PCIE_PHY_ATEOVRD 0x10
|
|
#define PCIE_PHY_ATEOVRD_EN BIT(2)
|
|
#define PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT 0
|
|
#define PCIE_PHY_ATEOVRD_REF_CLKDIV_MASK 0x1
|
|
|
|
#define PCIE_PHY_MPLL_OVRD_IN_LO 0x11
|
|
#define PCIE_PHY_MPLL_MULTIPLIER_SHIFT 2
|
|
#define PCIE_PHY_MPLL_MULTIPLIER_MASK 0x7f
|
|
#define PCIE_PHY_MPLL_MULTIPLIER_OVRD BIT(9)
|
|
|
|
#define PCIE_PHY_RX_ASIC_OUT 0x100D
|
|
#define PCIE_PHY_RX_ASIC_OUT_VALID (1 << 0)
|
|
|
|
/* iMX7 PCIe PHY registers */
|
|
#define PCIE_PHY_CMN_REG4 0x14
|
|
/* These are probably the bits that *aren't* DCC_FB_EN */
|
|
#define PCIE_PHY_CMN_REG4_DCC_FB_EN 0x29
|
|
|
|
#define PCIE_PHY_CMN_REG15 0x54
|
|
#define PCIE_PHY_CMN_REG15_DLY_4 BIT(2)
|
|
#define PCIE_PHY_CMN_REG15_PLL_PD BIT(5)
|
|
#define PCIE_PHY_CMN_REG15_OVRD_PLL_PD BIT(7)
|
|
|
|
#define PCIE_PHY_CMN_REG24 0x90
|
|
#define PCIE_PHY_CMN_REG24_RX_EQ BIT(6)
|
|
#define PCIE_PHY_CMN_REG24_RX_EQ_SEL BIT(3)
|
|
|
|
#define PCIE_PHY_CMN_REG26 0x98
|
|
#define PCIE_PHY_CMN_REG26_ATT_MODE 0xBC
|
|
|
|
#define PHY_RX_OVRD_IN_LO 0x1005
|
|
#define PHY_RX_OVRD_IN_LO_RX_DATA_EN BIT(5)
|
|
#define PHY_RX_OVRD_IN_LO_RX_PLL_EN BIT(3)
|
|
|
|
static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, bool exp_val)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
bool val;
|
|
u32 max_iterations = 10;
|
|
u32 wait_counter = 0;
|
|
|
|
do {
|
|
val = dw_pcie_readl_dbi(pci, PCIE_PHY_STAT) &
|
|
PCIE_PHY_STAT_ACK;
|
|
wait_counter++;
|
|
|
|
if (val == exp_val)
|
|
return 0;
|
|
|
|
udelay(1);
|
|
} while (wait_counter < max_iterations);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int pcie_phy_wait_ack(struct imx6_pcie *imx6_pcie, int addr)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
u32 val;
|
|
int ret;
|
|
|
|
val = PCIE_PHY_CTRL_DATA(addr);
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, val);
|
|
|
|
val |= PCIE_PHY_CTRL_CAP_ADR;
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, val);
|
|
|
|
ret = pcie_phy_poll_ack(imx6_pcie, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val = PCIE_PHY_CTRL_DATA(addr);
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, val);
|
|
|
|
return pcie_phy_poll_ack(imx6_pcie, false);
|
|
}
|
|
|
|
/* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */
|
|
static int pcie_phy_read(struct imx6_pcie *imx6_pcie, int addr, u16 *data)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
u32 phy_ctl;
|
|
int ret;
|
|
|
|
ret = pcie_phy_wait_ack(imx6_pcie, addr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* assert Read signal */
|
|
phy_ctl = PCIE_PHY_CTRL_RD;
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, phy_ctl);
|
|
|
|
ret = pcie_phy_poll_ack(imx6_pcie, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*data = dw_pcie_readl_dbi(pci, PCIE_PHY_STAT);
|
|
|
|
/* deassert Read signal */
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, 0x00);
|
|
|
|
return pcie_phy_poll_ack(imx6_pcie, false);
|
|
}
|
|
|
|
static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, u16 data)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
u32 var;
|
|
int ret;
|
|
|
|
/* write addr */
|
|
/* cap addr */
|
|
ret = pcie_phy_wait_ack(imx6_pcie, addr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
var = PCIE_PHY_CTRL_DATA(data);
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
|
|
|
|
/* capture data */
|
|
var |= PCIE_PHY_CTRL_CAP_DAT;
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
|
|
|
|
ret = pcie_phy_poll_ack(imx6_pcie, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* deassert cap data */
|
|
var = PCIE_PHY_CTRL_DATA(data);
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
|
|
|
|
/* wait for ack de-assertion */
|
|
ret = pcie_phy_poll_ack(imx6_pcie, false);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* assert wr signal */
|
|
var = PCIE_PHY_CTRL_WR;
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
|
|
|
|
/* wait for ack */
|
|
ret = pcie_phy_poll_ack(imx6_pcie, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* deassert wr signal */
|
|
var = PCIE_PHY_CTRL_DATA(data);
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
|
|
|
|
/* wait for ack de-assertion */
|
|
ret = pcie_phy_poll_ack(imx6_pcie, false);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, 0x0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
u16 tmp;
|
|
|
|
if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_IMX6_PHY))
|
|
return;
|
|
|
|
pcie_phy_read(imx6_pcie, PHY_RX_OVRD_IN_LO, &tmp);
|
|
tmp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN |
|
|
PHY_RX_OVRD_IN_LO_RX_PLL_EN);
|
|
pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp);
|
|
|
|
usleep_range(2000, 3000);
|
|
|
|
pcie_phy_read(imx6_pcie, PHY_RX_OVRD_IN_LO, &tmp);
|
|
tmp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN |
|
|
PHY_RX_OVRD_IN_LO_RX_PLL_EN);
|
|
pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp);
|
|
}
|
|
|
|
#ifdef CONFIG_ARM
|
|
/* Added for PCI abort handling */
|
|
static int imx6q_pcie_abort_handler(unsigned long addr,
|
|
unsigned int fsr, struct pt_regs *regs)
|
|
{
|
|
unsigned long pc = instruction_pointer(regs);
|
|
unsigned long instr = *(unsigned long *)pc;
|
|
int reg = (instr >> 12) & 15;
|
|
|
|
/*
|
|
* If the instruction being executed was a read,
|
|
* make it look like it read all-ones.
|
|
*/
|
|
if ((instr & 0x0c100000) == 0x04100000) {
|
|
unsigned long val;
|
|
|
|
if (instr & 0x00400000)
|
|
val = 255;
|
|
else
|
|
val = -1;
|
|
|
|
regs->uregs[reg] = val;
|
|
regs->ARM_pc += 4;
|
|
return 0;
|
|
}
|
|
|
|
if ((instr & 0x0e100090) == 0x00100090) {
|
|
regs->uregs[reg] = -1;
|
|
regs->ARM_pc += 4;
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
#endif
|
|
|
|
static int imx6_pcie_attach_pd(struct device *dev)
|
|
{
|
|
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
|
|
struct device_link *link;
|
|
|
|
/* Do nothing when in a single power domain */
|
|
if (dev->pm_domain)
|
|
return 0;
|
|
|
|
imx6_pcie->pd_pcie = dev_pm_domain_attach_by_name(dev, "pcie");
|
|
if (IS_ERR(imx6_pcie->pd_pcie))
|
|
return PTR_ERR(imx6_pcie->pd_pcie);
|
|
/* Do nothing when power domain missing */
|
|
if (!imx6_pcie->pd_pcie)
|
|
return 0;
|
|
link = device_link_add(dev, imx6_pcie->pd_pcie,
|
|
DL_FLAG_STATELESS |
|
|
DL_FLAG_PM_RUNTIME |
|
|
DL_FLAG_RPM_ACTIVE);
|
|
if (!link) {
|
|
dev_err(dev, "Failed to add device_link to pcie pd.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
imx6_pcie->pd_pcie_phy = dev_pm_domain_attach_by_name(dev, "pcie_phy");
|
|
if (IS_ERR(imx6_pcie->pd_pcie_phy))
|
|
return PTR_ERR(imx6_pcie->pd_pcie_phy);
|
|
|
|
link = device_link_add(dev, imx6_pcie->pd_pcie_phy,
|
|
DL_FLAG_STATELESS |
|
|
DL_FLAG_PM_RUNTIME |
|
|
DL_FLAG_RPM_ACTIVE);
|
|
if (!link) {
|
|
dev_err(dev, "Failed to add device_link to pcie_phy pd.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
struct device *dev = imx6_pcie->pci->dev;
|
|
|
|
switch (imx6_pcie->drvdata->variant) {
|
|
case IMX7D:
|
|
case IMX8MQ:
|
|
reset_control_assert(imx6_pcie->pciephy_reset);
|
|
reset_control_assert(imx6_pcie->apps_reset);
|
|
break;
|
|
case IMX6SX:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6SX_GPR12_PCIE_TEST_POWERDOWN,
|
|
IMX6SX_GPR12_PCIE_TEST_POWERDOWN);
|
|
/* Force PCIe PHY reset */
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
|
|
IMX6SX_GPR5_PCIE_BTNRST_RESET,
|
|
IMX6SX_GPR5_PCIE_BTNRST_RESET);
|
|
break;
|
|
case IMX6QP:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_SW_RST,
|
|
IMX6Q_GPR1_PCIE_SW_RST);
|
|
break;
|
|
case IMX6Q:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
|
|
break;
|
|
}
|
|
|
|
if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
|
|
int ret = regulator_disable(imx6_pcie->vpcie);
|
|
|
|
if (ret)
|
|
dev_err(dev, "failed to disable vpcie regulator: %d\n",
|
|
ret);
|
|
}
|
|
}
|
|
|
|
static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
|
|
{
|
|
WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ);
|
|
return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
|
|
}
|
|
|
|
static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
unsigned int offset;
|
|
int ret = 0;
|
|
|
|
switch (imx6_pcie->drvdata->variant) {
|
|
case IMX6SX:
|
|
ret = clk_prepare_enable(imx6_pcie->pcie_inbound_axi);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable pcie_axi clock\n");
|
|
break;
|
|
}
|
|
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6SX_GPR12_PCIE_TEST_POWERDOWN, 0);
|
|
break;
|
|
case IMX6QP: /* FALLTHROUGH */
|
|
case IMX6Q:
|
|
/* power up core phy and enable ref clock */
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
|
|
/*
|
|
* the async reset input need ref clock to sync internally,
|
|
* when the ref clock comes after reset, internal synced
|
|
* reset time is too short, cannot meet the requirement.
|
|
* add one ~10us delay here.
|
|
*/
|
|
usleep_range(10, 100);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
|
|
break;
|
|
case IMX7D:
|
|
break;
|
|
case IMX8MQ:
|
|
ret = clk_prepare_enable(imx6_pcie->pcie_aux);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable pcie_aux clock\n");
|
|
break;
|
|
}
|
|
|
|
offset = imx6_pcie_grp_offset(imx6_pcie);
|
|
/*
|
|
* Set the over ride low and enabled
|
|
* make sure that REF_CLK is turned on.
|
|
*/
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, offset,
|
|
IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE,
|
|
0);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, offset,
|
|
IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN,
|
|
IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN);
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
u32 val;
|
|
struct device *dev = imx6_pcie->pci->dev;
|
|
|
|
if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr,
|
|
IOMUXC_GPR22, val,
|
|
val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED,
|
|
PHY_PLL_LOCK_WAIT_USLEEP_MAX,
|
|
PHY_PLL_LOCK_WAIT_TIMEOUT))
|
|
dev_err(dev, "PCIe PLL lock timeout\n");
|
|
}
|
|
|
|
static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
int ret;
|
|
|
|
if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
|
|
ret = regulator_enable(imx6_pcie->vpcie);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable vpcie regulator: %d\n",
|
|
ret);
|
|
return;
|
|
}
|
|
}
|
|
|
|
ret = clk_prepare_enable(imx6_pcie->pcie_phy);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable pcie_phy clock\n");
|
|
goto err_pcie_phy;
|
|
}
|
|
|
|
ret = clk_prepare_enable(imx6_pcie->pcie_bus);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable pcie_bus clock\n");
|
|
goto err_pcie_bus;
|
|
}
|
|
|
|
ret = clk_prepare_enable(imx6_pcie->pcie);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable pcie clock\n");
|
|
goto err_pcie;
|
|
}
|
|
|
|
ret = imx6_pcie_enable_ref_clk(imx6_pcie);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable pcie ref clock\n");
|
|
goto err_ref_clk;
|
|
}
|
|
|
|
/* allow the clocks to stabilize */
|
|
usleep_range(200, 500);
|
|
|
|
/* Some boards don't have PCIe reset GPIO. */
|
|
if (gpio_is_valid(imx6_pcie->reset_gpio)) {
|
|
gpio_set_value_cansleep(imx6_pcie->reset_gpio,
|
|
imx6_pcie->gpio_active_high);
|
|
msleep(100);
|
|
gpio_set_value_cansleep(imx6_pcie->reset_gpio,
|
|
!imx6_pcie->gpio_active_high);
|
|
}
|
|
|
|
switch (imx6_pcie->drvdata->variant) {
|
|
case IMX8MQ:
|
|
reset_control_deassert(imx6_pcie->pciephy_reset);
|
|
break;
|
|
case IMX7D:
|
|
reset_control_deassert(imx6_pcie->pciephy_reset);
|
|
|
|
/* Workaround for ERR010728, failure of PCI-e PLL VCO to
|
|
* oscillate, especially when cold. This turns off "Duty-cycle
|
|
* Corrector" and other mysterious undocumented things.
|
|
*/
|
|
if (likely(imx6_pcie->phy_base)) {
|
|
/* De-assert DCC_FB_EN */
|
|
writel(PCIE_PHY_CMN_REG4_DCC_FB_EN,
|
|
imx6_pcie->phy_base + PCIE_PHY_CMN_REG4);
|
|
/* Assert RX_EQS and RX_EQS_SEL */
|
|
writel(PCIE_PHY_CMN_REG24_RX_EQ_SEL
|
|
| PCIE_PHY_CMN_REG24_RX_EQ,
|
|
imx6_pcie->phy_base + PCIE_PHY_CMN_REG24);
|
|
/* Assert ATT_MODE */
|
|
writel(PCIE_PHY_CMN_REG26_ATT_MODE,
|
|
imx6_pcie->phy_base + PCIE_PHY_CMN_REG26);
|
|
} else {
|
|
dev_warn(dev, "Unable to apply ERR010728 workaround. DT missing fsl,imx7d-pcie-phy phandle ?\n");
|
|
}
|
|
|
|
imx7d_pcie_wait_for_phy_pll_lock(imx6_pcie);
|
|
break;
|
|
case IMX6SX:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
|
|
IMX6SX_GPR5_PCIE_BTNRST_RESET, 0);
|
|
break;
|
|
case IMX6QP:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_SW_RST, 0);
|
|
|
|
usleep_range(200, 500);
|
|
break;
|
|
case IMX6Q: /* Nothing to do */
|
|
break;
|
|
}
|
|
|
|
return;
|
|
|
|
err_ref_clk:
|
|
clk_disable_unprepare(imx6_pcie->pcie);
|
|
err_pcie:
|
|
clk_disable_unprepare(imx6_pcie->pcie_bus);
|
|
err_pcie_bus:
|
|
clk_disable_unprepare(imx6_pcie->pcie_phy);
|
|
err_pcie_phy:
|
|
if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
|
|
ret = regulator_disable(imx6_pcie->vpcie);
|
|
if (ret)
|
|
dev_err(dev, "failed to disable vpcie regulator: %d\n",
|
|
ret);
|
|
}
|
|
}
|
|
|
|
static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
unsigned int mask, val;
|
|
|
|
if (imx6_pcie->drvdata->variant == IMX8MQ &&
|
|
imx6_pcie->controller_id == 1) {
|
|
mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE;
|
|
val = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
|
|
PCI_EXP_TYPE_ROOT_PORT);
|
|
} else {
|
|
mask = IMX6Q_GPR12_DEVICE_TYPE;
|
|
val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE,
|
|
PCI_EXP_TYPE_ROOT_PORT);
|
|
}
|
|
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val);
|
|
}
|
|
|
|
static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
switch (imx6_pcie->drvdata->variant) {
|
|
case IMX8MQ:
|
|
/*
|
|
* TODO: Currently this code assumes external
|
|
* oscillator is being used
|
|
*/
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr,
|
|
imx6_pcie_grp_offset(imx6_pcie),
|
|
IMX8MQ_GPR_PCIE_REF_USE_PAD,
|
|
IMX8MQ_GPR_PCIE_REF_USE_PAD);
|
|
break;
|
|
case IMX7D:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
|
|
break;
|
|
case IMX6SX:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6SX_GPR12_PCIE_RX_EQ_MASK,
|
|
IMX6SX_GPR12_PCIE_RX_EQ_2);
|
|
/* FALLTHROUGH */
|
|
default:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
|
|
|
|
/* configure constant input signal to the pcie ctrl and phy */
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
|
|
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
IMX6Q_GPR8_TX_DEEMPH_GEN1,
|
|
imx6_pcie->tx_deemph_gen1 << 0);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
|
|
imx6_pcie->tx_deemph_gen2_3p5db << 6);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
|
|
imx6_pcie->tx_deemph_gen2_6db << 12);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
IMX6Q_GPR8_TX_SWING_FULL,
|
|
imx6_pcie->tx_swing_full << 18);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
IMX6Q_GPR8_TX_SWING_LOW,
|
|
imx6_pcie->tx_swing_low << 25);
|
|
break;
|
|
}
|
|
|
|
imx6_pcie_configure_type(imx6_pcie);
|
|
}
|
|
|
|
static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
unsigned long phy_rate = clk_get_rate(imx6_pcie->pcie_phy);
|
|
int mult, div;
|
|
u16 val;
|
|
|
|
if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_IMX6_PHY))
|
|
return 0;
|
|
|
|
switch (phy_rate) {
|
|
case 125000000:
|
|
/*
|
|
* The default settings of the MPLL are for a 125MHz input
|
|
* clock, so no need to reconfigure anything in that case.
|
|
*/
|
|
return 0;
|
|
case 100000000:
|
|
mult = 25;
|
|
div = 0;
|
|
break;
|
|
case 200000000:
|
|
mult = 25;
|
|
div = 1;
|
|
break;
|
|
default:
|
|
dev_err(imx6_pcie->pci->dev,
|
|
"Unsupported PHY reference clock rate %lu\n", phy_rate);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pcie_phy_read(imx6_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, &val);
|
|
val &= ~(PCIE_PHY_MPLL_MULTIPLIER_MASK <<
|
|
PCIE_PHY_MPLL_MULTIPLIER_SHIFT);
|
|
val |= mult << PCIE_PHY_MPLL_MULTIPLIER_SHIFT;
|
|
val |= PCIE_PHY_MPLL_MULTIPLIER_OVRD;
|
|
pcie_phy_write(imx6_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, val);
|
|
|
|
pcie_phy_read(imx6_pcie, PCIE_PHY_ATEOVRD, &val);
|
|
val &= ~(PCIE_PHY_ATEOVRD_REF_CLKDIV_MASK <<
|
|
PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT);
|
|
val |= div << PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT;
|
|
val |= PCIE_PHY_ATEOVRD_EN;
|
|
pcie_phy_write(imx6_pcie, PCIE_PHY_ATEOVRD, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
u32 tmp;
|
|
unsigned int retries;
|
|
|
|
for (retries = 0; retries < 200; retries++) {
|
|
tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
|
|
/* Test if the speed change finished. */
|
|
if (!(tmp & PORT_LOGIC_SPEED_CHANGE))
|
|
return 0;
|
|
usleep_range(100, 1000);
|
|
}
|
|
|
|
dev_err(dev, "Speed change timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static void imx6_pcie_ltssm_enable(struct device *dev)
|
|
{
|
|
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
|
|
|
|
switch (imx6_pcie->drvdata->variant) {
|
|
case IMX6Q:
|
|
case IMX6SX:
|
|
case IMX6QP:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6Q_GPR12_PCIE_CTL_2,
|
|
IMX6Q_GPR12_PCIE_CTL_2);
|
|
break;
|
|
case IMX7D:
|
|
case IMX8MQ:
|
|
reset_control_deassert(imx6_pcie->apps_reset);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
u32 tmp;
|
|
int ret;
|
|
|
|
/*
|
|
* Force Gen1 operation when starting the link. In case the link is
|
|
* started in Gen2 mode, there is a possibility the devices on the
|
|
* bus will not be detected at all. This happens with PCIe switches.
|
|
*/
|
|
tmp = dw_pcie_readl_dbi(pci, PCIE_RC_LCR);
|
|
tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
|
|
tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1;
|
|
dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp);
|
|
|
|
/* Start LTSSM. */
|
|
imx6_pcie_ltssm_enable(dev);
|
|
|
|
ret = dw_pcie_wait_for_link(pci);
|
|
if (ret)
|
|
goto err_reset_phy;
|
|
|
|
if (imx6_pcie->link_gen == 2) {
|
|
/* Allow Gen2 mode after the link is up. */
|
|
tmp = dw_pcie_readl_dbi(pci, PCIE_RC_LCR);
|
|
tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
|
|
tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN2;
|
|
dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp);
|
|
|
|
/*
|
|
* Start Directed Speed Change so the best possible
|
|
* speed both link partners support can be negotiated.
|
|
*/
|
|
tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
|
|
tmp |= PORT_LOGIC_SPEED_CHANGE;
|
|
dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
|
|
|
|
if (imx6_pcie->drvdata->flags &
|
|
IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE) {
|
|
/*
|
|
* On i.MX7, DIRECT_SPEED_CHANGE behaves differently
|
|
* from i.MX6 family when no link speed transition
|
|
* occurs and we go Gen1 -> yep, Gen1. The difference
|
|
* is that, in such case, it will not be cleared by HW
|
|
* which will cause the following code to report false
|
|
* failure.
|
|
*/
|
|
|
|
ret = imx6_pcie_wait_for_speed_change(imx6_pcie);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to bring link up!\n");
|
|
goto err_reset_phy;
|
|
}
|
|
}
|
|
|
|
/* Make sure link training is finished as well! */
|
|
ret = dw_pcie_wait_for_link(pci);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to bring link up!\n");
|
|
goto err_reset_phy;
|
|
}
|
|
} else {
|
|
dev_info(dev, "Link: Gen2 disabled\n");
|
|
}
|
|
|
|
tmp = dw_pcie_readl_dbi(pci, PCIE_RC_LCSR);
|
|
dev_info(dev, "Link up, Gen%i\n", (tmp >> 16) & 0xf);
|
|
return 0;
|
|
|
|
err_reset_phy:
|
|
dev_dbg(dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n",
|
|
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
|
|
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
|
|
imx6_pcie_reset_phy(imx6_pcie);
|
|
return ret;
|
|
}
|
|
|
|
static int imx6_pcie_host_init(struct pcie_port *pp)
|
|
{
|
|
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
|
|
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
|
|
|
|
imx6_pcie_assert_core_reset(imx6_pcie);
|
|
imx6_pcie_init_phy(imx6_pcie);
|
|
imx6_pcie_deassert_core_reset(imx6_pcie);
|
|
imx6_setup_phy_mpll(imx6_pcie);
|
|
dw_pcie_setup_rc(pp);
|
|
imx6_pcie_establish_link(imx6_pcie);
|
|
|
|
if (IS_ENABLED(CONFIG_PCI_MSI))
|
|
dw_pcie_msi_init(pp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dw_pcie_host_ops imx6_pcie_host_ops = {
|
|
.host_init = imx6_pcie_host_init,
|
|
};
|
|
|
|
static int imx6_add_pcie_port(struct imx6_pcie *imx6_pcie,
|
|
struct platform_device *pdev)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
struct pcie_port *pp = &pci->pp;
|
|
struct device *dev = &pdev->dev;
|
|
int ret;
|
|
|
|
if (IS_ENABLED(CONFIG_PCI_MSI)) {
|
|
pp->msi_irq = platform_get_irq_byname(pdev, "msi");
|
|
if (pp->msi_irq <= 0) {
|
|
dev_err(dev, "failed to get MSI irq\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
pp->ops = &imx6_pcie_host_ops;
|
|
|
|
ret = dw_pcie_host_init(pp);
|
|
if (ret) {
|
|
dev_err(dev, "failed to initialize host\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dw_pcie_ops dw_pcie_ops = {
|
|
/* No special ops needed, but pcie-designware still expects this struct */
|
|
};
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static void imx6_pcie_ltssm_disable(struct device *dev)
|
|
{
|
|
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
|
|
|
|
switch (imx6_pcie->drvdata->variant) {
|
|
case IMX6SX:
|
|
case IMX6QP:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6Q_GPR12_PCIE_CTL_2, 0);
|
|
break;
|
|
case IMX7D:
|
|
reset_control_assert(imx6_pcie->apps_reset);
|
|
break;
|
|
default:
|
|
dev_err(dev, "ltssm_disable not supported\n");
|
|
}
|
|
}
|
|
|
|
static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
struct device *dev = imx6_pcie->pci->dev;
|
|
|
|
/* Some variants have a turnoff reset in DT */
|
|
if (imx6_pcie->turnoff_reset) {
|
|
reset_control_assert(imx6_pcie->turnoff_reset);
|
|
reset_control_deassert(imx6_pcie->turnoff_reset);
|
|
goto pm_turnoff_sleep;
|
|
}
|
|
|
|
/* Others poke directly at IOMUXC registers */
|
|
switch (imx6_pcie->drvdata->variant) {
|
|
case IMX6SX:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6SX_GPR12_PCIE_PM_TURN_OFF,
|
|
IMX6SX_GPR12_PCIE_PM_TURN_OFF);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6SX_GPR12_PCIE_PM_TURN_OFF, 0);
|
|
break;
|
|
default:
|
|
dev_err(dev, "PME_Turn_Off not implemented\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Components with an upstream port must respond to
|
|
* PME_Turn_Off with PME_TO_Ack but we can't check.
|
|
*
|
|
* The standard recommends a 1-10ms timeout after which to
|
|
* proceed anyway as if acks were received.
|
|
*/
|
|
pm_turnoff_sleep:
|
|
usleep_range(1000, 10000);
|
|
}
|
|
|
|
static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
clk_disable_unprepare(imx6_pcie->pcie);
|
|
clk_disable_unprepare(imx6_pcie->pcie_phy);
|
|
clk_disable_unprepare(imx6_pcie->pcie_bus);
|
|
|
|
switch (imx6_pcie->drvdata->variant) {
|
|
case IMX6SX:
|
|
clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
|
|
break;
|
|
case IMX7D:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
|
|
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
|
|
break;
|
|
case IMX8MQ:
|
|
clk_disable_unprepare(imx6_pcie->pcie_aux);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int imx6_pcie_suspend_noirq(struct device *dev)
|
|
{
|
|
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
|
|
|
|
if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND))
|
|
return 0;
|
|
|
|
imx6_pcie_pm_turnoff(imx6_pcie);
|
|
imx6_pcie_clk_disable(imx6_pcie);
|
|
imx6_pcie_ltssm_disable(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx6_pcie_resume_noirq(struct device *dev)
|
|
{
|
|
int ret;
|
|
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
|
|
struct pcie_port *pp = &imx6_pcie->pci->pp;
|
|
|
|
if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND))
|
|
return 0;
|
|
|
|
imx6_pcie_assert_core_reset(imx6_pcie);
|
|
imx6_pcie_init_phy(imx6_pcie);
|
|
imx6_pcie_deassert_core_reset(imx6_pcie);
|
|
dw_pcie_setup_rc(pp);
|
|
|
|
ret = imx6_pcie_establish_link(imx6_pcie);
|
|
if (ret < 0)
|
|
dev_info(dev, "pcie link is down after resume.\n");
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops imx6_pcie_pm_ops = {
|
|
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(imx6_pcie_suspend_noirq,
|
|
imx6_pcie_resume_noirq)
|
|
};
|
|
|
|
static int imx6_pcie_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct dw_pcie *pci;
|
|
struct imx6_pcie *imx6_pcie;
|
|
struct device_node *np;
|
|
struct resource *dbi_base;
|
|
struct device_node *node = dev->of_node;
|
|
int ret;
|
|
u16 val;
|
|
|
|
imx6_pcie = devm_kzalloc(dev, sizeof(*imx6_pcie), GFP_KERNEL);
|
|
if (!imx6_pcie)
|
|
return -ENOMEM;
|
|
|
|
pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
|
|
if (!pci)
|
|
return -ENOMEM;
|
|
|
|
pci->dev = dev;
|
|
pci->ops = &dw_pcie_ops;
|
|
|
|
imx6_pcie->pci = pci;
|
|
imx6_pcie->drvdata = of_device_get_match_data(dev);
|
|
|
|
/* Find the PHY if one is defined, only imx7d uses it */
|
|
np = of_parse_phandle(node, "fsl,imx7d-pcie-phy", 0);
|
|
if (np) {
|
|
struct resource res;
|
|
|
|
ret = of_address_to_resource(np, 0, &res);
|
|
if (ret) {
|
|
dev_err(dev, "Unable to map PCIe PHY\n");
|
|
return ret;
|
|
}
|
|
imx6_pcie->phy_base = devm_ioremap_resource(dev, &res);
|
|
if (IS_ERR(imx6_pcie->phy_base)) {
|
|
dev_err(dev, "Unable to map PCIe PHY\n");
|
|
return PTR_ERR(imx6_pcie->phy_base);
|
|
}
|
|
}
|
|
|
|
dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
pci->dbi_base = devm_ioremap_resource(dev, dbi_base);
|
|
if (IS_ERR(pci->dbi_base))
|
|
return PTR_ERR(pci->dbi_base);
|
|
|
|
/* Fetch GPIOs */
|
|
imx6_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0);
|
|
imx6_pcie->gpio_active_high = of_property_read_bool(node,
|
|
"reset-gpio-active-high");
|
|
if (gpio_is_valid(imx6_pcie->reset_gpio)) {
|
|
ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio,
|
|
imx6_pcie->gpio_active_high ?
|
|
GPIOF_OUT_INIT_HIGH :
|
|
GPIOF_OUT_INIT_LOW,
|
|
"PCIe reset");
|
|
if (ret) {
|
|
dev_err(dev, "unable to get reset gpio\n");
|
|
return ret;
|
|
}
|
|
} else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) {
|
|
return imx6_pcie->reset_gpio;
|
|
}
|
|
|
|
/* Fetch clocks */
|
|
imx6_pcie->pcie_phy = devm_clk_get(dev, "pcie_phy");
|
|
if (IS_ERR(imx6_pcie->pcie_phy)) {
|
|
dev_err(dev, "pcie_phy clock source missing or invalid\n");
|
|
return PTR_ERR(imx6_pcie->pcie_phy);
|
|
}
|
|
|
|
imx6_pcie->pcie_bus = devm_clk_get(dev, "pcie_bus");
|
|
if (IS_ERR(imx6_pcie->pcie_bus)) {
|
|
dev_err(dev, "pcie_bus clock source missing or invalid\n");
|
|
return PTR_ERR(imx6_pcie->pcie_bus);
|
|
}
|
|
|
|
imx6_pcie->pcie = devm_clk_get(dev, "pcie");
|
|
if (IS_ERR(imx6_pcie->pcie)) {
|
|
dev_err(dev, "pcie clock source missing or invalid\n");
|
|
return PTR_ERR(imx6_pcie->pcie);
|
|
}
|
|
|
|
switch (imx6_pcie->drvdata->variant) {
|
|
case IMX6SX:
|
|
imx6_pcie->pcie_inbound_axi = devm_clk_get(dev,
|
|
"pcie_inbound_axi");
|
|
if (IS_ERR(imx6_pcie->pcie_inbound_axi)) {
|
|
dev_err(dev, "pcie_inbound_axi clock missing or invalid\n");
|
|
return PTR_ERR(imx6_pcie->pcie_inbound_axi);
|
|
}
|
|
break;
|
|
case IMX8MQ:
|
|
imx6_pcie->pcie_aux = devm_clk_get(dev, "pcie_aux");
|
|
if (IS_ERR(imx6_pcie->pcie_aux)) {
|
|
dev_err(dev, "pcie_aux clock source missing or invalid\n");
|
|
return PTR_ERR(imx6_pcie->pcie_aux);
|
|
}
|
|
/* fall through */
|
|
case IMX7D:
|
|
if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
|
|
imx6_pcie->controller_id = 1;
|
|
|
|
imx6_pcie->pciephy_reset = devm_reset_control_get_exclusive(dev,
|
|
"pciephy");
|
|
if (IS_ERR(imx6_pcie->pciephy_reset)) {
|
|
dev_err(dev, "Failed to get PCIEPHY reset control\n");
|
|
return PTR_ERR(imx6_pcie->pciephy_reset);
|
|
}
|
|
|
|
imx6_pcie->apps_reset = devm_reset_control_get_exclusive(dev,
|
|
"apps");
|
|
if (IS_ERR(imx6_pcie->apps_reset)) {
|
|
dev_err(dev, "Failed to get PCIE APPS reset control\n");
|
|
return PTR_ERR(imx6_pcie->apps_reset);
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Grab turnoff reset */
|
|
imx6_pcie->turnoff_reset = devm_reset_control_get_optional_exclusive(dev, "turnoff");
|
|
if (IS_ERR(imx6_pcie->turnoff_reset)) {
|
|
dev_err(dev, "Failed to get TURNOFF reset control\n");
|
|
return PTR_ERR(imx6_pcie->turnoff_reset);
|
|
}
|
|
|
|
/* Grab GPR config register range */
|
|
imx6_pcie->iomuxc_gpr =
|
|
syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
|
|
if (IS_ERR(imx6_pcie->iomuxc_gpr)) {
|
|
dev_err(dev, "unable to find iomuxc registers\n");
|
|
return PTR_ERR(imx6_pcie->iomuxc_gpr);
|
|
}
|
|
|
|
/* Grab PCIe PHY Tx Settings */
|
|
if (of_property_read_u32(node, "fsl,tx-deemph-gen1",
|
|
&imx6_pcie->tx_deemph_gen1))
|
|
imx6_pcie->tx_deemph_gen1 = 0;
|
|
|
|
if (of_property_read_u32(node, "fsl,tx-deemph-gen2-3p5db",
|
|
&imx6_pcie->tx_deemph_gen2_3p5db))
|
|
imx6_pcie->tx_deemph_gen2_3p5db = 0;
|
|
|
|
if (of_property_read_u32(node, "fsl,tx-deemph-gen2-6db",
|
|
&imx6_pcie->tx_deemph_gen2_6db))
|
|
imx6_pcie->tx_deemph_gen2_6db = 20;
|
|
|
|
if (of_property_read_u32(node, "fsl,tx-swing-full",
|
|
&imx6_pcie->tx_swing_full))
|
|
imx6_pcie->tx_swing_full = 127;
|
|
|
|
if (of_property_read_u32(node, "fsl,tx-swing-low",
|
|
&imx6_pcie->tx_swing_low))
|
|
imx6_pcie->tx_swing_low = 127;
|
|
|
|
/* Limit link speed */
|
|
ret = of_property_read_u32(node, "fsl,max-link-speed",
|
|
&imx6_pcie->link_gen);
|
|
if (ret)
|
|
imx6_pcie->link_gen = 1;
|
|
|
|
imx6_pcie->vpcie = devm_regulator_get_optional(&pdev->dev, "vpcie");
|
|
if (IS_ERR(imx6_pcie->vpcie)) {
|
|
if (PTR_ERR(imx6_pcie->vpcie) != -ENODEV)
|
|
return PTR_ERR(imx6_pcie->vpcie);
|
|
imx6_pcie->vpcie = NULL;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, imx6_pcie);
|
|
|
|
ret = imx6_pcie_attach_pd(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = imx6_add_pcie_port(imx6_pcie, pdev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (pci_msi_enabled()) {
|
|
val = dw_pcie_readw_dbi(pci, PCIE_RC_IMX6_MSI_CAP +
|
|
PCI_MSI_FLAGS);
|
|
val |= PCI_MSI_FLAGS_ENABLE;
|
|
dw_pcie_writew_dbi(pci, PCIE_RC_IMX6_MSI_CAP + PCI_MSI_FLAGS,
|
|
val);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void imx6_pcie_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct imx6_pcie *imx6_pcie = platform_get_drvdata(pdev);
|
|
|
|
/* bring down link, so bootloader gets clean state in case of reboot */
|
|
imx6_pcie_assert_core_reset(imx6_pcie);
|
|
}
|
|
|
|
static const struct imx6_pcie_drvdata drvdata[] = {
|
|
[IMX6Q] = {
|
|
.variant = IMX6Q,
|
|
.flags = IMX6_PCIE_FLAG_IMX6_PHY |
|
|
IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE,
|
|
.dbi_length = 0x200,
|
|
},
|
|
[IMX6SX] = {
|
|
.variant = IMX6SX,
|
|
.flags = IMX6_PCIE_FLAG_IMX6_PHY |
|
|
IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE |
|
|
IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
|
|
},
|
|
[IMX6QP] = {
|
|
.variant = IMX6QP,
|
|
.flags = IMX6_PCIE_FLAG_IMX6_PHY |
|
|
IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE,
|
|
},
|
|
[IMX7D] = {
|
|
.variant = IMX7D,
|
|
.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
|
|
},
|
|
[IMX8MQ] = {
|
|
.variant = IMX8MQ,
|
|
},
|
|
};
|
|
|
|
static const struct of_device_id imx6_pcie_of_match[] = {
|
|
{ .compatible = "fsl,imx6q-pcie", .data = &drvdata[IMX6Q], },
|
|
{ .compatible = "fsl,imx6sx-pcie", .data = &drvdata[IMX6SX], },
|
|
{ .compatible = "fsl,imx6qp-pcie", .data = &drvdata[IMX6QP], },
|
|
{ .compatible = "fsl,imx7d-pcie", .data = &drvdata[IMX7D], },
|
|
{ .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], } ,
|
|
{},
|
|
};
|
|
|
|
static struct platform_driver imx6_pcie_driver = {
|
|
.driver = {
|
|
.name = "imx6q-pcie",
|
|
.of_match_table = imx6_pcie_of_match,
|
|
.suppress_bind_attrs = true,
|
|
.pm = &imx6_pcie_pm_ops,
|
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
|
},
|
|
.probe = imx6_pcie_probe,
|
|
.shutdown = imx6_pcie_shutdown,
|
|
};
|
|
|
|
static void imx6_pcie_quirk(struct pci_dev *dev)
|
|
{
|
|
struct pci_bus *bus = dev->bus;
|
|
struct pcie_port *pp = bus->sysdata;
|
|
|
|
/* Bus parent is the PCI bridge, its parent is this platform driver */
|
|
if (!bus->dev.parent || !bus->dev.parent->parent)
|
|
return;
|
|
|
|
/* Make sure we only quirk devices associated with this driver */
|
|
if (bus->dev.parent->parent->driver != &imx6_pcie_driver.driver)
|
|
return;
|
|
|
|
if (bus->number == pp->root_bus_nr) {
|
|
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
|
|
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
|
|
|
|
/*
|
|
* Limit config length to avoid the kernel reading beyond
|
|
* the register set and causing an abort on i.MX 6Quad
|
|
*/
|
|
if (imx6_pcie->drvdata->dbi_length) {
|
|
dev->cfg_size = imx6_pcie->drvdata->dbi_length;
|
|
dev_info(&dev->dev, "Limiting cfg_size to %d\n",
|
|
dev->cfg_size);
|
|
}
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_SYNOPSYS, 0xabcd,
|
|
PCI_CLASS_BRIDGE_PCI, 8, imx6_pcie_quirk);
|
|
|
|
static int __init imx6_pcie_init(void)
|
|
{
|
|
#ifdef CONFIG_ARM
|
|
/*
|
|
* Since probe() can be deferred we need to make sure that
|
|
* hook_fault_code is not called after __init memory is freed
|
|
* by kernel and since imx6q_pcie_abort_handler() is a no-op,
|
|
* we can install the handler here without risking it
|
|
* accessing some uninitialized driver state.
|
|
*/
|
|
hook_fault_code(8, imx6q_pcie_abort_handler, SIGBUS, 0,
|
|
"external abort on non-linefetch");
|
|
#endif
|
|
|
|
return platform_driver_register(&imx6_pcie_driver);
|
|
}
|
|
device_initcall(imx6_pcie_init);
|