linux/arch/x86/kernel/process.c
Linus Torvalds 4da9f33026 Support for FSGSBASE. Almost 5 years after the first RFC to support it,
this has been brought into a shape which is maintainable and actually
 works.
 
 This final version was done by Sasha Levin who took it up after Intel
 dropped the ball. Sasha discovered that the SGX (sic!) offerings out there
 ship rogue kernel modules enabling FSGSBASE behind the kernels back which
 opens an instantanious unpriviledged root hole.
 
 The FSGSBASE instructions provide a considerable speedup of the context
 switch path and enable user space to write GSBASE without kernel
 interaction. This enablement requires careful handling of the exception
 entries which go through the paranoid entry path as they cannot longer rely
 on the assumption that user GSBASE is positive (as enforced via prctl() on
 non FSGSBASE enabled systemn). All other entries (syscalls, interrupts and
 exceptions) can still just utilize SWAPGS unconditionally when the entry
 comes from user space. Converting these entries to use FSGSBASE has no
 benefit as SWAPGS is only marginally slower than WRGSBASE and locating and
 retrieving the kernel GSBASE value is not a free operation either. The real
 benefit of RD/WRGSBASE is the avoidance of the MSR reads and writes.
 
 The changes come with appropriate selftests and have held up in field
 testing against the (sanitized) Graphene-SGX driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl8pGnoTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoTYJD/9873GkwvGcc/Vq/dJH1szGTgFftPyZ
 c/Y9gzx7EGBPLo25BS820L+ZlynzXHDxExKfCEaD10TZfe5XIc1vYNR0J74M2NmK
 IBgEDstJeW93ai+rHCFRXIevhpzU4GgGYJ1MeeOgbVMN3aGU1g6HfzMvtF0fPn8Y
 n6fsLZa43wgnoTdjwjjikpDTrzoZbaL1mbODBzBVPAaTbim7IKKTge6r/iCKrOjz
 Uixvm3g9lVzx52zidJ9kWa8esmbOM1j0EPe7/hy3qH9DFo87KxEzjHNH3T6gY5t6
 NJhRAIfY+YyTHpPCUCshj6IkRudE6w/qjEAmKP9kWZxoJrvPCTWOhCzelwsFS9b9
 gxEYfsnaKhsfNhB6fi0PtWlMzPINmEA7SuPza33u5WtQUK7s1iNlgHfvMbjstbwg
 MSETn4SG2/ZyzUrSC06lVwV8kh0RgM3cENc/jpFfIHD0vKGI3qfka/1RY94kcOCG
 AeJd0YRSU2RqL7lmxhHyG8tdb8eexns41IzbPCLXX2sF00eKNkVvMRYT2mKfKLFF
 q8v1x7yuwmODdXfFR6NdCkGm9IU7wtL6wuQ8Nhu9UraFmcXo6X6FLJC18FqcvSb9
 jvcRP4XY/8pNjjf44JB8yWfah0xGQsaMIKQGP4yLv4j6Xk1xAQKH1MqcC7l1D2HN
 5Z24GibFqSK/vA==
 =QaAN
 -----END PGP SIGNATURE-----

Merge tag 'x86-fsgsbase-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fsgsbase from Thomas Gleixner:
 "Support for FSGSBASE. Almost 5 years after the first RFC to support
  it, this has been brought into a shape which is maintainable and
  actually works.

  This final version was done by Sasha Levin who took it up after Intel
  dropped the ball. Sasha discovered that the SGX (sic!) offerings out
  there ship rogue kernel modules enabling FSGSBASE behind the kernels
  back which opens an instantanious unpriviledged root hole.

  The FSGSBASE instructions provide a considerable speedup of the
  context switch path and enable user space to write GSBASE without
  kernel interaction. This enablement requires careful handling of the
  exception entries which go through the paranoid entry path as they
  can no longer rely on the assumption that user GSBASE is positive (as
  enforced via prctl() on non FSGSBASE enabled systemn).

  All other entries (syscalls, interrupts and exceptions) can still just
  utilize SWAPGS unconditionally when the entry comes from user space.
  Converting these entries to use FSGSBASE has no benefit as SWAPGS is
  only marginally slower than WRGSBASE and locating and retrieving the
  kernel GSBASE value is not a free operation either. The real benefit
  of RD/WRGSBASE is the avoidance of the MSR reads and writes.

  The changes come with appropriate selftests and have held up in field
  testing against the (sanitized) Graphene-SGX driver"

* tag 'x86-fsgsbase-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  x86/fsgsbase: Fix Xen PV support
  x86/ptrace: Fix 32-bit PTRACE_SETREGS vs fsbase and gsbase
  selftests/x86/fsgsbase: Add a missing memory constraint
  selftests/x86/fsgsbase: Fix a comment in the ptrace_write_gsbase test
  selftests/x86: Add a syscall_arg_fault_64 test for negative GSBASE
  selftests/x86/fsgsbase: Test ptracer-induced GS base write with FSGSBASE
  selftests/x86/fsgsbase: Test GS selector on ptracer-induced GS base write
  Documentation/x86/64: Add documentation for GS/FS addressing mode
  x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2
  x86/cpu: Enable FSGSBASE on 64bit by default and add a chicken bit
  x86/entry/64: Handle FSGSBASE enabled paranoid entry/exit
  x86/entry/64: Introduce the FIND_PERCPU_BASE macro
  x86/entry/64: Switch CR3 before SWAPGS in paranoid entry
  x86/speculation/swapgs: Check FSGSBASE in enabling SWAPGS mitigation
  x86/process/64: Use FSGSBASE instructions on thread copy and ptrace
  x86/process/64: Use FSBSBASE in switch_to() if available
  x86/process/64: Make save_fsgs_for_kvm() ready for FSGSBASE
  x86/fsgsbase/64: Enable FSGSBASE instructions in helper functions
  x86/fsgsbase/64: Add intrinsics for FSGSBASE instructions
  x86/cpu: Add 'unsafe_fsgsbase' to enable CR4.FSGSBASE
  ...
2020-08-04 21:16:22 -07:00

986 lines
24 KiB
C

// SPDX-License-Identifier: GPL-2.0
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/prctl.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/sched/idle.h>
#include <linux/sched/debug.h>
#include <linux/sched/task.h>
#include <linux/sched/task_stack.h>
#include <linux/init.h>
#include <linux/export.h>
#include <linux/pm.h>
#include <linux/tick.h>
#include <linux/random.h>
#include <linux/user-return-notifier.h>
#include <linux/dmi.h>
#include <linux/utsname.h>
#include <linux/stackprotector.h>
#include <linux/cpuidle.h>
#include <linux/acpi.h>
#include <linux/elf-randomize.h>
#include <trace/events/power.h>
#include <linux/hw_breakpoint.h>
#include <asm/cpu.h>
#include <asm/apic.h>
#include <linux/uaccess.h>
#include <asm/mwait.h>
#include <asm/fpu/internal.h>
#include <asm/debugreg.h>
#include <asm/nmi.h>
#include <asm/tlbflush.h>
#include <asm/mce.h>
#include <asm/vm86.h>
#include <asm/switch_to.h>
#include <asm/desc.h>
#include <asm/prctl.h>
#include <asm/spec-ctrl.h>
#include <asm/io_bitmap.h>
#include <asm/proto.h>
#include "process.h"
/*
* per-CPU TSS segments. Threads are completely 'soft' on Linux,
* no more per-task TSS's. The TSS size is kept cacheline-aligned
* so they are allowed to end up in the .data..cacheline_aligned
* section. Since TSS's are completely CPU-local, we want them
* on exact cacheline boundaries, to eliminate cacheline ping-pong.
*/
__visible DEFINE_PER_CPU_PAGE_ALIGNED(struct tss_struct, cpu_tss_rw) = {
.x86_tss = {
/*
* .sp0 is only used when entering ring 0 from a lower
* privilege level. Since the init task never runs anything
* but ring 0 code, there is no need for a valid value here.
* Poison it.
*/
.sp0 = (1UL << (BITS_PER_LONG-1)) + 1,
/*
* .sp1 is cpu_current_top_of_stack. The init task never
* runs user code, but cpu_current_top_of_stack should still
* be well defined before the first context switch.
*/
.sp1 = TOP_OF_INIT_STACK,
#ifdef CONFIG_X86_32
.ss0 = __KERNEL_DS,
.ss1 = __KERNEL_CS,
#endif
.io_bitmap_base = IO_BITMAP_OFFSET_INVALID,
},
};
EXPORT_PER_CPU_SYMBOL(cpu_tss_rw);
DEFINE_PER_CPU(bool, __tss_limit_invalid);
EXPORT_PER_CPU_SYMBOL_GPL(__tss_limit_invalid);
/*
* this gets called so that we can store lazy state into memory and copy the
* current task into the new thread.
*/
int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
{
memcpy(dst, src, arch_task_struct_size);
#ifdef CONFIG_VM86
dst->thread.vm86 = NULL;
#endif
return fpu__copy(dst, src);
}
/*
* Free thread data structures etc..
*/
void exit_thread(struct task_struct *tsk)
{
struct thread_struct *t = &tsk->thread;
struct fpu *fpu = &t->fpu;
if (test_thread_flag(TIF_IO_BITMAP))
io_bitmap_exit(tsk);
free_vm86(t);
fpu__drop(fpu);
}
static int set_new_tls(struct task_struct *p, unsigned long tls)
{
struct user_desc __user *utls = (struct user_desc __user *)tls;
if (in_ia32_syscall())
return do_set_thread_area(p, -1, utls, 0);
else
return do_set_thread_area_64(p, ARCH_SET_FS, tls);
}
int copy_thread(unsigned long clone_flags, unsigned long sp, unsigned long arg,
struct task_struct *p, unsigned long tls)
{
struct inactive_task_frame *frame;
struct fork_frame *fork_frame;
struct pt_regs *childregs;
int ret = 0;
childregs = task_pt_regs(p);
fork_frame = container_of(childregs, struct fork_frame, regs);
frame = &fork_frame->frame;
frame->bp = 0;
frame->ret_addr = (unsigned long) ret_from_fork;
p->thread.sp = (unsigned long) fork_frame;
p->thread.io_bitmap = NULL;
memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
#ifdef CONFIG_X86_64
current_save_fsgs();
p->thread.fsindex = current->thread.fsindex;
p->thread.fsbase = current->thread.fsbase;
p->thread.gsindex = current->thread.gsindex;
p->thread.gsbase = current->thread.gsbase;
savesegment(es, p->thread.es);
savesegment(ds, p->thread.ds);
#else
p->thread.sp0 = (unsigned long) (childregs + 1);
/*
* Clear all status flags including IF and set fixed bit. 64bit
* does not have this initialization as the frame does not contain
* flags. The flags consistency (especially vs. AC) is there
* ensured via objtool, which lacks 32bit support.
*/
frame->flags = X86_EFLAGS_FIXED;
#endif
/* Kernel thread ? */
if (unlikely(p->flags & PF_KTHREAD)) {
memset(childregs, 0, sizeof(struct pt_regs));
kthread_frame_init(frame, sp, arg);
return 0;
}
frame->bx = 0;
*childregs = *current_pt_regs();
childregs->ax = 0;
if (sp)
childregs->sp = sp;
#ifdef CONFIG_X86_32
task_user_gs(p) = get_user_gs(current_pt_regs());
#endif
/* Set a new TLS for the child thread? */
if (clone_flags & CLONE_SETTLS)
ret = set_new_tls(p, tls);
if (!ret && unlikely(test_tsk_thread_flag(current, TIF_IO_BITMAP)))
io_bitmap_share(p);
return ret;
}
void flush_thread(void)
{
struct task_struct *tsk = current;
flush_ptrace_hw_breakpoint(tsk);
memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
fpu__clear_all(&tsk->thread.fpu);
}
void disable_TSC(void)
{
preempt_disable();
if (!test_and_set_thread_flag(TIF_NOTSC))
/*
* Must flip the CPU state synchronously with
* TIF_NOTSC in the current running context.
*/
cr4_set_bits(X86_CR4_TSD);
preempt_enable();
}
static void enable_TSC(void)
{
preempt_disable();
if (test_and_clear_thread_flag(TIF_NOTSC))
/*
* Must flip the CPU state synchronously with
* TIF_NOTSC in the current running context.
*/
cr4_clear_bits(X86_CR4_TSD);
preempt_enable();
}
int get_tsc_mode(unsigned long adr)
{
unsigned int val;
if (test_thread_flag(TIF_NOTSC))
val = PR_TSC_SIGSEGV;
else
val = PR_TSC_ENABLE;
return put_user(val, (unsigned int __user *)adr);
}
int set_tsc_mode(unsigned int val)
{
if (val == PR_TSC_SIGSEGV)
disable_TSC();
else if (val == PR_TSC_ENABLE)
enable_TSC();
else
return -EINVAL;
return 0;
}
DEFINE_PER_CPU(u64, msr_misc_features_shadow);
static void set_cpuid_faulting(bool on)
{
u64 msrval;
msrval = this_cpu_read(msr_misc_features_shadow);
msrval &= ~MSR_MISC_FEATURES_ENABLES_CPUID_FAULT;
msrval |= (on << MSR_MISC_FEATURES_ENABLES_CPUID_FAULT_BIT);
this_cpu_write(msr_misc_features_shadow, msrval);
wrmsrl(MSR_MISC_FEATURES_ENABLES, msrval);
}
static void disable_cpuid(void)
{
preempt_disable();
if (!test_and_set_thread_flag(TIF_NOCPUID)) {
/*
* Must flip the CPU state synchronously with
* TIF_NOCPUID in the current running context.
*/
set_cpuid_faulting(true);
}
preempt_enable();
}
static void enable_cpuid(void)
{
preempt_disable();
if (test_and_clear_thread_flag(TIF_NOCPUID)) {
/*
* Must flip the CPU state synchronously with
* TIF_NOCPUID in the current running context.
*/
set_cpuid_faulting(false);
}
preempt_enable();
}
static int get_cpuid_mode(void)
{
return !test_thread_flag(TIF_NOCPUID);
}
static int set_cpuid_mode(struct task_struct *task, unsigned long cpuid_enabled)
{
if (!boot_cpu_has(X86_FEATURE_CPUID_FAULT))
return -ENODEV;
if (cpuid_enabled)
enable_cpuid();
else
disable_cpuid();
return 0;
}
/*
* Called immediately after a successful exec.
*/
void arch_setup_new_exec(void)
{
/* If cpuid was previously disabled for this task, re-enable it. */
if (test_thread_flag(TIF_NOCPUID))
enable_cpuid();
/*
* Don't inherit TIF_SSBD across exec boundary when
* PR_SPEC_DISABLE_NOEXEC is used.
*/
if (test_thread_flag(TIF_SSBD) &&
task_spec_ssb_noexec(current)) {
clear_thread_flag(TIF_SSBD);
task_clear_spec_ssb_disable(current);
task_clear_spec_ssb_noexec(current);
speculation_ctrl_update(task_thread_info(current)->flags);
}
}
#ifdef CONFIG_X86_IOPL_IOPERM
static inline void switch_to_bitmap(unsigned long tifp)
{
/*
* Invalidate I/O bitmap if the previous task used it. This prevents
* any possible leakage of an active I/O bitmap.
*
* If the next task has an I/O bitmap it will handle it on exit to
* user mode.
*/
if (tifp & _TIF_IO_BITMAP)
tss_invalidate_io_bitmap();
}
static void tss_copy_io_bitmap(struct tss_struct *tss, struct io_bitmap *iobm)
{
/*
* Copy at least the byte range of the incoming tasks bitmap which
* covers the permitted I/O ports.
*
* If the previous task which used an I/O bitmap had more bits
* permitted, then the copy needs to cover those as well so they
* get turned off.
*/
memcpy(tss->io_bitmap.bitmap, iobm->bitmap,
max(tss->io_bitmap.prev_max, iobm->max));
/*
* Store the new max and the sequence number of this bitmap
* and a pointer to the bitmap itself.
*/
tss->io_bitmap.prev_max = iobm->max;
tss->io_bitmap.prev_sequence = iobm->sequence;
}
/**
* tss_update_io_bitmap - Update I/O bitmap before exiting to usermode
*/
void native_tss_update_io_bitmap(void)
{
struct tss_struct *tss = this_cpu_ptr(&cpu_tss_rw);
struct thread_struct *t = &current->thread;
u16 *base = &tss->x86_tss.io_bitmap_base;
if (!test_thread_flag(TIF_IO_BITMAP)) {
native_tss_invalidate_io_bitmap();
return;
}
if (IS_ENABLED(CONFIG_X86_IOPL_IOPERM) && t->iopl_emul == 3) {
*base = IO_BITMAP_OFFSET_VALID_ALL;
} else {
struct io_bitmap *iobm = t->io_bitmap;
/*
* Only copy bitmap data when the sequence number differs. The
* update time is accounted to the incoming task.
*/
if (tss->io_bitmap.prev_sequence != iobm->sequence)
tss_copy_io_bitmap(tss, iobm);
/* Enable the bitmap */
*base = IO_BITMAP_OFFSET_VALID_MAP;
}
/*
* Make sure that the TSS limit is covering the IO bitmap. It might have
* been cut down by a VMEXIT to 0x67 which would cause a subsequent I/O
* access from user space to trigger a #GP because tbe bitmap is outside
* the TSS limit.
*/
refresh_tss_limit();
}
#else /* CONFIG_X86_IOPL_IOPERM */
static inline void switch_to_bitmap(unsigned long tifp) { }
#endif
#ifdef CONFIG_SMP
struct ssb_state {
struct ssb_state *shared_state;
raw_spinlock_t lock;
unsigned int disable_state;
unsigned long local_state;
};
#define LSTATE_SSB 0
static DEFINE_PER_CPU(struct ssb_state, ssb_state);
void speculative_store_bypass_ht_init(void)
{
struct ssb_state *st = this_cpu_ptr(&ssb_state);
unsigned int this_cpu = smp_processor_id();
unsigned int cpu;
st->local_state = 0;
/*
* Shared state setup happens once on the first bringup
* of the CPU. It's not destroyed on CPU hotunplug.
*/
if (st->shared_state)
return;
raw_spin_lock_init(&st->lock);
/*
* Go over HT siblings and check whether one of them has set up the
* shared state pointer already.
*/
for_each_cpu(cpu, topology_sibling_cpumask(this_cpu)) {
if (cpu == this_cpu)
continue;
if (!per_cpu(ssb_state, cpu).shared_state)
continue;
/* Link it to the state of the sibling: */
st->shared_state = per_cpu(ssb_state, cpu).shared_state;
return;
}
/*
* First HT sibling to come up on the core. Link shared state of
* the first HT sibling to itself. The siblings on the same core
* which come up later will see the shared state pointer and link
* themself to the state of this CPU.
*/
st->shared_state = st;
}
/*
* Logic is: First HT sibling enables SSBD for both siblings in the core
* and last sibling to disable it, disables it for the whole core. This how
* MSR_SPEC_CTRL works in "hardware":
*
* CORE_SPEC_CTRL = THREAD0_SPEC_CTRL | THREAD1_SPEC_CTRL
*/
static __always_inline void amd_set_core_ssb_state(unsigned long tifn)
{
struct ssb_state *st = this_cpu_ptr(&ssb_state);
u64 msr = x86_amd_ls_cfg_base;
if (!static_cpu_has(X86_FEATURE_ZEN)) {
msr |= ssbd_tif_to_amd_ls_cfg(tifn);
wrmsrl(MSR_AMD64_LS_CFG, msr);
return;
}
if (tifn & _TIF_SSBD) {
/*
* Since this can race with prctl(), block reentry on the
* same CPU.
*/
if (__test_and_set_bit(LSTATE_SSB, &st->local_state))
return;
msr |= x86_amd_ls_cfg_ssbd_mask;
raw_spin_lock(&st->shared_state->lock);
/* First sibling enables SSBD: */
if (!st->shared_state->disable_state)
wrmsrl(MSR_AMD64_LS_CFG, msr);
st->shared_state->disable_state++;
raw_spin_unlock(&st->shared_state->lock);
} else {
if (!__test_and_clear_bit(LSTATE_SSB, &st->local_state))
return;
raw_spin_lock(&st->shared_state->lock);
st->shared_state->disable_state--;
if (!st->shared_state->disable_state)
wrmsrl(MSR_AMD64_LS_CFG, msr);
raw_spin_unlock(&st->shared_state->lock);
}
}
#else
static __always_inline void amd_set_core_ssb_state(unsigned long tifn)
{
u64 msr = x86_amd_ls_cfg_base | ssbd_tif_to_amd_ls_cfg(tifn);
wrmsrl(MSR_AMD64_LS_CFG, msr);
}
#endif
static __always_inline void amd_set_ssb_virt_state(unsigned long tifn)
{
/*
* SSBD has the same definition in SPEC_CTRL and VIRT_SPEC_CTRL,
* so ssbd_tif_to_spec_ctrl() just works.
*/
wrmsrl(MSR_AMD64_VIRT_SPEC_CTRL, ssbd_tif_to_spec_ctrl(tifn));
}
/*
* Update the MSRs managing speculation control, during context switch.
*
* tifp: Previous task's thread flags
* tifn: Next task's thread flags
*/
static __always_inline void __speculation_ctrl_update(unsigned long tifp,
unsigned long tifn)
{
unsigned long tif_diff = tifp ^ tifn;
u64 msr = x86_spec_ctrl_base;
bool updmsr = false;
lockdep_assert_irqs_disabled();
/* Handle change of TIF_SSBD depending on the mitigation method. */
if (static_cpu_has(X86_FEATURE_VIRT_SSBD)) {
if (tif_diff & _TIF_SSBD)
amd_set_ssb_virt_state(tifn);
} else if (static_cpu_has(X86_FEATURE_LS_CFG_SSBD)) {
if (tif_diff & _TIF_SSBD)
amd_set_core_ssb_state(tifn);
} else if (static_cpu_has(X86_FEATURE_SPEC_CTRL_SSBD) ||
static_cpu_has(X86_FEATURE_AMD_SSBD)) {
updmsr |= !!(tif_diff & _TIF_SSBD);
msr |= ssbd_tif_to_spec_ctrl(tifn);
}
/* Only evaluate TIF_SPEC_IB if conditional STIBP is enabled. */
if (IS_ENABLED(CONFIG_SMP) &&
static_branch_unlikely(&switch_to_cond_stibp)) {
updmsr |= !!(tif_diff & _TIF_SPEC_IB);
msr |= stibp_tif_to_spec_ctrl(tifn);
}
if (updmsr)
wrmsrl(MSR_IA32_SPEC_CTRL, msr);
}
static unsigned long speculation_ctrl_update_tif(struct task_struct *tsk)
{
if (test_and_clear_tsk_thread_flag(tsk, TIF_SPEC_FORCE_UPDATE)) {
if (task_spec_ssb_disable(tsk))
set_tsk_thread_flag(tsk, TIF_SSBD);
else
clear_tsk_thread_flag(tsk, TIF_SSBD);
if (task_spec_ib_disable(tsk))
set_tsk_thread_flag(tsk, TIF_SPEC_IB);
else
clear_tsk_thread_flag(tsk, TIF_SPEC_IB);
}
/* Return the updated threadinfo flags*/
return task_thread_info(tsk)->flags;
}
void speculation_ctrl_update(unsigned long tif)
{
unsigned long flags;
/* Forced update. Make sure all relevant TIF flags are different */
local_irq_save(flags);
__speculation_ctrl_update(~tif, tif);
local_irq_restore(flags);
}
/* Called from seccomp/prctl update */
void speculation_ctrl_update_current(void)
{
preempt_disable();
speculation_ctrl_update(speculation_ctrl_update_tif(current));
preempt_enable();
}
static inline void cr4_toggle_bits_irqsoff(unsigned long mask)
{
unsigned long newval, cr4 = this_cpu_read(cpu_tlbstate.cr4);
newval = cr4 ^ mask;
if (newval != cr4) {
this_cpu_write(cpu_tlbstate.cr4, newval);
__write_cr4(newval);
}
}
void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p)
{
unsigned long tifp, tifn;
tifn = READ_ONCE(task_thread_info(next_p)->flags);
tifp = READ_ONCE(task_thread_info(prev_p)->flags);
switch_to_bitmap(tifp);
propagate_user_return_notify(prev_p, next_p);
if ((tifp & _TIF_BLOCKSTEP || tifn & _TIF_BLOCKSTEP) &&
arch_has_block_step()) {
unsigned long debugctl, msk;
rdmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
debugctl &= ~DEBUGCTLMSR_BTF;
msk = tifn & _TIF_BLOCKSTEP;
debugctl |= (msk >> TIF_BLOCKSTEP) << DEBUGCTLMSR_BTF_SHIFT;
wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
}
if ((tifp ^ tifn) & _TIF_NOTSC)
cr4_toggle_bits_irqsoff(X86_CR4_TSD);
if ((tifp ^ tifn) & _TIF_NOCPUID)
set_cpuid_faulting(!!(tifn & _TIF_NOCPUID));
if (likely(!((tifp | tifn) & _TIF_SPEC_FORCE_UPDATE))) {
__speculation_ctrl_update(tifp, tifn);
} else {
speculation_ctrl_update_tif(prev_p);
tifn = speculation_ctrl_update_tif(next_p);
/* Enforce MSR update to ensure consistent state */
__speculation_ctrl_update(~tifn, tifn);
}
if ((tifp ^ tifn) & _TIF_SLD)
switch_to_sld(tifn);
}
/*
* Idle related variables and functions
*/
unsigned long boot_option_idle_override = IDLE_NO_OVERRIDE;
EXPORT_SYMBOL(boot_option_idle_override);
static void (*x86_idle)(void);
#ifndef CONFIG_SMP
static inline void play_dead(void)
{
BUG();
}
#endif
void arch_cpu_idle_enter(void)
{
tsc_verify_tsc_adjust(false);
local_touch_nmi();
}
void arch_cpu_idle_dead(void)
{
play_dead();
}
/*
* Called from the generic idle code.
*/
void arch_cpu_idle(void)
{
x86_idle();
}
/*
* We use this if we don't have any better idle routine..
*/
void __cpuidle default_idle(void)
{
trace_cpu_idle_rcuidle(1, smp_processor_id());
safe_halt();
trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
}
#if defined(CONFIG_APM_MODULE) || defined(CONFIG_HALTPOLL_CPUIDLE_MODULE)
EXPORT_SYMBOL(default_idle);
#endif
#ifdef CONFIG_XEN
bool xen_set_default_idle(void)
{
bool ret = !!x86_idle;
x86_idle = default_idle;
return ret;
}
#endif
void stop_this_cpu(void *dummy)
{
local_irq_disable();
/*
* Remove this CPU:
*/
set_cpu_online(smp_processor_id(), false);
disable_local_APIC();
mcheck_cpu_clear(this_cpu_ptr(&cpu_info));
/*
* Use wbinvd on processors that support SME. This provides support
* for performing a successful kexec when going from SME inactive
* to SME active (or vice-versa). The cache must be cleared so that
* if there are entries with the same physical address, both with and
* without the encryption bit, they don't race each other when flushed
* and potentially end up with the wrong entry being committed to
* memory.
*/
if (boot_cpu_has(X86_FEATURE_SME))
native_wbinvd();
for (;;) {
/*
* Use native_halt() so that memory contents don't change
* (stack usage and variables) after possibly issuing the
* native_wbinvd() above.
*/
native_halt();
}
}
/*
* AMD Erratum 400 aware idle routine. We handle it the same way as C3 power
* states (local apic timer and TSC stop).
*/
static void amd_e400_idle(void)
{
/*
* We cannot use static_cpu_has_bug() here because X86_BUG_AMD_APIC_C1E
* gets set after static_cpu_has() places have been converted via
* alternatives.
*/
if (!boot_cpu_has_bug(X86_BUG_AMD_APIC_C1E)) {
default_idle();
return;
}
tick_broadcast_enter();
default_idle();
/*
* The switch back from broadcast mode needs to be called with
* interrupts disabled.
*/
local_irq_disable();
tick_broadcast_exit();
local_irq_enable();
}
/*
* Intel Core2 and older machines prefer MWAIT over HALT for C1.
* We can't rely on cpuidle installing MWAIT, because it will not load
* on systems that support only C1 -- so the boot default must be MWAIT.
*
* Some AMD machines are the opposite, they depend on using HALT.
*
* So for default C1, which is used during boot until cpuidle loads,
* use MWAIT-C1 on Intel HW that has it, else use HALT.
*/
static int prefer_mwait_c1_over_halt(const struct cpuinfo_x86 *c)
{
if (c->x86_vendor != X86_VENDOR_INTEL)
return 0;
if (!cpu_has(c, X86_FEATURE_MWAIT) || boot_cpu_has_bug(X86_BUG_MONITOR))
return 0;
return 1;
}
/*
* MONITOR/MWAIT with no hints, used for default C1 state. This invokes MWAIT
* with interrupts enabled and no flags, which is backwards compatible with the
* original MWAIT implementation.
*/
static __cpuidle void mwait_idle(void)
{
if (!current_set_polling_and_test()) {
trace_cpu_idle_rcuidle(1, smp_processor_id());
if (this_cpu_has(X86_BUG_CLFLUSH_MONITOR)) {
mb(); /* quirk */
clflush((void *)&current_thread_info()->flags);
mb(); /* quirk */
}
__monitor((void *)&current_thread_info()->flags, 0, 0);
if (!need_resched())
__sti_mwait(0, 0);
else
local_irq_enable();
trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
} else {
local_irq_enable();
}
__current_clr_polling();
}
void select_idle_routine(const struct cpuinfo_x86 *c)
{
#ifdef CONFIG_SMP
if (boot_option_idle_override == IDLE_POLL && smp_num_siblings > 1)
pr_warn_once("WARNING: polling idle and HT enabled, performance may degrade\n");
#endif
if (x86_idle || boot_option_idle_override == IDLE_POLL)
return;
if (boot_cpu_has_bug(X86_BUG_AMD_E400)) {
pr_info("using AMD E400 aware idle routine\n");
x86_idle = amd_e400_idle;
} else if (prefer_mwait_c1_over_halt(c)) {
pr_info("using mwait in idle threads\n");
x86_idle = mwait_idle;
} else
x86_idle = default_idle;
}
void amd_e400_c1e_apic_setup(void)
{
if (boot_cpu_has_bug(X86_BUG_AMD_APIC_C1E)) {
pr_info("Switch to broadcast mode on CPU%d\n", smp_processor_id());
local_irq_disable();
tick_broadcast_force();
local_irq_enable();
}
}
void __init arch_post_acpi_subsys_init(void)
{
u32 lo, hi;
if (!boot_cpu_has_bug(X86_BUG_AMD_E400))
return;
/*
* AMD E400 detection needs to happen after ACPI has been enabled. If
* the machine is affected K8_INTP_C1E_ACTIVE_MASK bits are set in
* MSR_K8_INT_PENDING_MSG.
*/
rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi);
if (!(lo & K8_INTP_C1E_ACTIVE_MASK))
return;
boot_cpu_set_bug(X86_BUG_AMD_APIC_C1E);
if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
mark_tsc_unstable("TSC halt in AMD C1E");
pr_info("System has AMD C1E enabled\n");
}
static int __init idle_setup(char *str)
{
if (!str)
return -EINVAL;
if (!strcmp(str, "poll")) {
pr_info("using polling idle threads\n");
boot_option_idle_override = IDLE_POLL;
cpu_idle_poll_ctrl(true);
} else if (!strcmp(str, "halt")) {
/*
* When the boot option of idle=halt is added, halt is
* forced to be used for CPU idle. In such case CPU C2/C3
* won't be used again.
* To continue to load the CPU idle driver, don't touch
* the boot_option_idle_override.
*/
x86_idle = default_idle;
boot_option_idle_override = IDLE_HALT;
} else if (!strcmp(str, "nomwait")) {
/*
* If the boot option of "idle=nomwait" is added,
* it means that mwait will be disabled for CPU C2/C3
* states. In such case it won't touch the variable
* of boot_option_idle_override.
*/
boot_option_idle_override = IDLE_NOMWAIT;
} else
return -1;
return 0;
}
early_param("idle", idle_setup);
unsigned long arch_align_stack(unsigned long sp)
{
if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
sp -= get_random_int() % 8192;
return sp & ~0xf;
}
unsigned long arch_randomize_brk(struct mm_struct *mm)
{
return randomize_page(mm->brk, 0x02000000);
}
/*
* Called from fs/proc with a reference on @p to find the function
* which called into schedule(). This needs to be done carefully
* because the task might wake up and we might look at a stack
* changing under us.
*/
unsigned long get_wchan(struct task_struct *p)
{
unsigned long start, bottom, top, sp, fp, ip, ret = 0;
int count = 0;
if (p == current || p->state == TASK_RUNNING)
return 0;
if (!try_get_task_stack(p))
return 0;
start = (unsigned long)task_stack_page(p);
if (!start)
goto out;
/*
* Layout of the stack page:
*
* ----------- topmax = start + THREAD_SIZE - sizeof(unsigned long)
* PADDING
* ----------- top = topmax - TOP_OF_KERNEL_STACK_PADDING
* stack
* ----------- bottom = start
*
* The tasks stack pointer points at the location where the
* framepointer is stored. The data on the stack is:
* ... IP FP ... IP FP
*
* We need to read FP and IP, so we need to adjust the upper
* bound by another unsigned long.
*/
top = start + THREAD_SIZE - TOP_OF_KERNEL_STACK_PADDING;
top -= 2 * sizeof(unsigned long);
bottom = start;
sp = READ_ONCE(p->thread.sp);
if (sp < bottom || sp > top)
goto out;
fp = READ_ONCE_NOCHECK(((struct inactive_task_frame *)sp)->bp);
do {
if (fp < bottom || fp > top)
goto out;
ip = READ_ONCE_NOCHECK(*(unsigned long *)(fp + sizeof(unsigned long)));
if (!in_sched_functions(ip)) {
ret = ip;
goto out;
}
fp = READ_ONCE_NOCHECK(*(unsigned long *)fp);
} while (count++ < 16 && p->state != TASK_RUNNING);
out:
put_task_stack(p);
return ret;
}
long do_arch_prctl_common(struct task_struct *task, int option,
unsigned long cpuid_enabled)
{
switch (option) {
case ARCH_GET_CPUID:
return get_cpuid_mode();
case ARCH_SET_CPUID:
return set_cpuid_mode(task, cpuid_enabled);
}
return -EINVAL;
}