mirror of
https://github.com/torvalds/linux.git
synced 2024-12-23 11:21:33 +00:00
e7550b0be3
Fixes the following sparse warnings: drivers/net/dsa/vitesse-vsc73xx.c:1054:6: warning: symbol 'vsc73xx_get_strings' was not declared. Should it be static? drivers/net/dsa/vitesse-vsc73xx.c:1113:5: warning: symbol 'vsc73xx_get_sset_count' was not declared. Should it be static? drivers/net/dsa/vitesse-vsc73xx.c:1122:6: warning: symbol 'vsc73xx_get_ethtool_stats' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1366 lines
38 KiB
C
1366 lines
38 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/* DSA driver for:
|
|
* Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch
|
|
* Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch
|
|
* Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
|
|
* Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch
|
|
*
|
|
* These switches have a built-in 8051 CPU and can download and execute a
|
|
* firmware in this CPU. They can also be configured to use an external CPU
|
|
* handling the switch in a memory-mapped manner by connecting to that external
|
|
* CPU's memory bus.
|
|
*
|
|
* This driver (currently) only takes control of the switch chip over SPI and
|
|
* configures it to route packages around when connected to a CPU port. The
|
|
* chip has embedded PHYs and VLAN support so we model it using DSA.
|
|
*
|
|
* Copyright (C) 2018 Linus Wallej <linus.walleij@linaro.org>
|
|
* Includes portions of code from the firmware uploader by:
|
|
* Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_mdio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/if_bridge.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/random.h>
|
|
#include <net/dsa.h>
|
|
|
|
#define VSC73XX_BLOCK_MAC 0x1 /* Subblocks 0-4, 6 (CPU port) */
|
|
#define VSC73XX_BLOCK_ANALYZER 0x2 /* Only subblock 0 */
|
|
#define VSC73XX_BLOCK_MII 0x3 /* Subblocks 0 and 1 */
|
|
#define VSC73XX_BLOCK_MEMINIT 0x3 /* Only subblock 2 */
|
|
#define VSC73XX_BLOCK_CAPTURE 0x4 /* Only subblock 2 */
|
|
#define VSC73XX_BLOCK_ARBITER 0x5 /* Only subblock 0 */
|
|
#define VSC73XX_BLOCK_SYSTEM 0x7 /* Only subblock 0 */
|
|
|
|
#define CPU_PORT 6 /* CPU port */
|
|
|
|
/* MAC Block registers */
|
|
#define VSC73XX_MAC_CFG 0x00
|
|
#define VSC73XX_MACHDXGAP 0x02
|
|
#define VSC73XX_FCCONF 0x04
|
|
#define VSC73XX_FCMACHI 0x08
|
|
#define VSC73XX_FCMACLO 0x0c
|
|
#define VSC73XX_MAXLEN 0x10
|
|
#define VSC73XX_ADVPORTM 0x19
|
|
#define VSC73XX_TXUPDCFG 0x24
|
|
#define VSC73XX_TXQ_SELECT_CFG 0x28
|
|
#define VSC73XX_RXOCT 0x50
|
|
#define VSC73XX_TXOCT 0x51
|
|
#define VSC73XX_C_RX0 0x52
|
|
#define VSC73XX_C_RX1 0x53
|
|
#define VSC73XX_C_RX2 0x54
|
|
#define VSC73XX_C_TX0 0x55
|
|
#define VSC73XX_C_TX1 0x56
|
|
#define VSC73XX_C_TX2 0x57
|
|
#define VSC73XX_C_CFG 0x58
|
|
#define VSC73XX_CAT_DROP 0x6e
|
|
#define VSC73XX_CAT_PR_MISC_L2 0x6f
|
|
#define VSC73XX_CAT_PR_USR_PRIO 0x75
|
|
#define VSC73XX_Q_MISC_CONF 0xdf
|
|
|
|
/* MAC_CFG register bits */
|
|
#define VSC73XX_MAC_CFG_WEXC_DIS BIT(31)
|
|
#define VSC73XX_MAC_CFG_PORT_RST BIT(29)
|
|
#define VSC73XX_MAC_CFG_TX_EN BIT(28)
|
|
#define VSC73XX_MAC_CFG_SEED_LOAD BIT(27)
|
|
#define VSC73XX_MAC_CFG_SEED_MASK GENMASK(26, 19)
|
|
#define VSC73XX_MAC_CFG_SEED_OFFSET 19
|
|
#define VSC73XX_MAC_CFG_FDX BIT(18)
|
|
#define VSC73XX_MAC_CFG_GIGA_MODE BIT(17)
|
|
#define VSC73XX_MAC_CFG_RX_EN BIT(16)
|
|
#define VSC73XX_MAC_CFG_VLAN_DBLAWR BIT(15)
|
|
#define VSC73XX_MAC_CFG_VLAN_AWR BIT(14)
|
|
#define VSC73XX_MAC_CFG_100_BASE_T BIT(13) /* Not in manual */
|
|
#define VSC73XX_MAC_CFG_TX_IPG_MASK GENMASK(10, 6)
|
|
#define VSC73XX_MAC_CFG_TX_IPG_OFFSET 6
|
|
#define VSC73XX_MAC_CFG_TX_IPG_1000M (6 << VSC73XX_MAC_CFG_TX_IPG_OFFSET)
|
|
#define VSC73XX_MAC_CFG_TX_IPG_100_10M (17 << VSC73XX_MAC_CFG_TX_IPG_OFFSET)
|
|
#define VSC73XX_MAC_CFG_MAC_RX_RST BIT(5)
|
|
#define VSC73XX_MAC_CFG_MAC_TX_RST BIT(4)
|
|
#define VSC73XX_MAC_CFG_CLK_SEL_MASK GENMASK(2, 0)
|
|
#define VSC73XX_MAC_CFG_CLK_SEL_OFFSET 0
|
|
#define VSC73XX_MAC_CFG_CLK_SEL_1000M 1
|
|
#define VSC73XX_MAC_CFG_CLK_SEL_100M 2
|
|
#define VSC73XX_MAC_CFG_CLK_SEL_10M 3
|
|
#define VSC73XX_MAC_CFG_CLK_SEL_EXT 4
|
|
|
|
#define VSC73XX_MAC_CFG_1000M_F_PHY (VSC73XX_MAC_CFG_FDX | \
|
|
VSC73XX_MAC_CFG_GIGA_MODE | \
|
|
VSC73XX_MAC_CFG_TX_IPG_1000M | \
|
|
VSC73XX_MAC_CFG_CLK_SEL_EXT)
|
|
#define VSC73XX_MAC_CFG_100_10M_F_PHY (VSC73XX_MAC_CFG_FDX | \
|
|
VSC73XX_MAC_CFG_TX_IPG_100_10M | \
|
|
VSC73XX_MAC_CFG_CLK_SEL_EXT)
|
|
#define VSC73XX_MAC_CFG_100_10M_H_PHY (VSC73XX_MAC_CFG_TX_IPG_100_10M | \
|
|
VSC73XX_MAC_CFG_CLK_SEL_EXT)
|
|
#define VSC73XX_MAC_CFG_1000M_F_RGMII (VSC73XX_MAC_CFG_FDX | \
|
|
VSC73XX_MAC_CFG_GIGA_MODE | \
|
|
VSC73XX_MAC_CFG_TX_IPG_1000M | \
|
|
VSC73XX_MAC_CFG_CLK_SEL_1000M)
|
|
#define VSC73XX_MAC_CFG_RESET (VSC73XX_MAC_CFG_PORT_RST | \
|
|
VSC73XX_MAC_CFG_MAC_RX_RST | \
|
|
VSC73XX_MAC_CFG_MAC_TX_RST)
|
|
|
|
/* Flow control register bits */
|
|
#define VSC73XX_FCCONF_ZERO_PAUSE_EN BIT(17)
|
|
#define VSC73XX_FCCONF_FLOW_CTRL_OBEY BIT(16)
|
|
#define VSC73XX_FCCONF_PAUSE_VAL_MASK GENMASK(15, 0)
|
|
|
|
/* ADVPORTM advanced port setup register bits */
|
|
#define VSC73XX_ADVPORTM_IFG_PPM BIT(7)
|
|
#define VSC73XX_ADVPORTM_EXC_COL_CONT BIT(6)
|
|
#define VSC73XX_ADVPORTM_EXT_PORT BIT(5)
|
|
#define VSC73XX_ADVPORTM_INV_GTX BIT(4)
|
|
#define VSC73XX_ADVPORTM_ENA_GTX BIT(3)
|
|
#define VSC73XX_ADVPORTM_DDR_MODE BIT(2)
|
|
#define VSC73XX_ADVPORTM_IO_LOOPBACK BIT(1)
|
|
#define VSC73XX_ADVPORTM_HOST_LOOPBACK BIT(0)
|
|
|
|
/* CAT_DROP categorizer frame dropping register bits */
|
|
#define VSC73XX_CAT_DROP_DROP_MC_SMAC_ENA BIT(6)
|
|
#define VSC73XX_CAT_DROP_FWD_CTRL_ENA BIT(4)
|
|
#define VSC73XX_CAT_DROP_FWD_PAUSE_ENA BIT(3)
|
|
#define VSC73XX_CAT_DROP_UNTAGGED_ENA BIT(2)
|
|
#define VSC73XX_CAT_DROP_TAGGED_ENA BIT(1)
|
|
#define VSC73XX_CAT_DROP_NULL_MAC_ENA BIT(0)
|
|
|
|
#define VSC73XX_Q_MISC_CONF_EXTENT_MEM BIT(31)
|
|
#define VSC73XX_Q_MISC_CONF_EARLY_TX_MASK GENMASK(4, 1)
|
|
#define VSC73XX_Q_MISC_CONF_EARLY_TX_512 (1 << 1)
|
|
#define VSC73XX_Q_MISC_CONF_MAC_PAUSE_MODE BIT(0)
|
|
|
|
/* Frame analyzer block 2 registers */
|
|
#define VSC73XX_STORMLIMIT 0x02
|
|
#define VSC73XX_ADVLEARN 0x03
|
|
#define VSC73XX_IFLODMSK 0x04
|
|
#define VSC73XX_VLANMASK 0x05
|
|
#define VSC73XX_MACHDATA 0x06
|
|
#define VSC73XX_MACLDATA 0x07
|
|
#define VSC73XX_ANMOVED 0x08
|
|
#define VSC73XX_ANAGEFIL 0x09
|
|
#define VSC73XX_ANEVENTS 0x0a
|
|
#define VSC73XX_ANCNTMASK 0x0b
|
|
#define VSC73XX_ANCNTVAL 0x0c
|
|
#define VSC73XX_LEARNMASK 0x0d
|
|
#define VSC73XX_UFLODMASK 0x0e
|
|
#define VSC73XX_MFLODMASK 0x0f
|
|
#define VSC73XX_RECVMASK 0x10
|
|
#define VSC73XX_AGGRCTRL 0x20
|
|
#define VSC73XX_AGGRMSKS 0x30 /* Until 0x3f */
|
|
#define VSC73XX_DSTMASKS 0x40 /* Until 0x7f */
|
|
#define VSC73XX_SRCMASKS 0x80 /* Until 0x87 */
|
|
#define VSC73XX_CAPENAB 0xa0
|
|
#define VSC73XX_MACACCESS 0xb0
|
|
#define VSC73XX_IPMCACCESS 0xb1
|
|
#define VSC73XX_MACTINDX 0xc0
|
|
#define VSC73XX_VLANACCESS 0xd0
|
|
#define VSC73XX_VLANTIDX 0xe0
|
|
#define VSC73XX_AGENCTRL 0xf0
|
|
#define VSC73XX_CAPRST 0xff
|
|
|
|
#define VSC73XX_MACACCESS_CPU_COPY BIT(14)
|
|
#define VSC73XX_MACACCESS_FWD_KILL BIT(13)
|
|
#define VSC73XX_MACACCESS_IGNORE_VLAN BIT(12)
|
|
#define VSC73XX_MACACCESS_AGED_FLAG BIT(11)
|
|
#define VSC73XX_MACACCESS_VALID BIT(10)
|
|
#define VSC73XX_MACACCESS_LOCKED BIT(9)
|
|
#define VSC73XX_MACACCESS_DEST_IDX_MASK GENMASK(8, 3)
|
|
#define VSC73XX_MACACCESS_CMD_MASK GENMASK(2, 0)
|
|
#define VSC73XX_MACACCESS_CMD_IDLE 0
|
|
#define VSC73XX_MACACCESS_CMD_LEARN 1
|
|
#define VSC73XX_MACACCESS_CMD_FORGET 2
|
|
#define VSC73XX_MACACCESS_CMD_AGE_TABLE 3
|
|
#define VSC73XX_MACACCESS_CMD_FLUSH_TABLE 4
|
|
#define VSC73XX_MACACCESS_CMD_CLEAR_TABLE 5
|
|
#define VSC73XX_MACACCESS_CMD_READ_ENTRY 6
|
|
#define VSC73XX_MACACCESS_CMD_WRITE_ENTRY 7
|
|
|
|
#define VSC73XX_VLANACCESS_LEARN_DISABLED BIT(30)
|
|
#define VSC73XX_VLANACCESS_VLAN_MIRROR BIT(29)
|
|
#define VSC73XX_VLANACCESS_VLAN_SRC_CHECK BIT(28)
|
|
#define VSC73XX_VLANACCESS_VLAN_PORT_MASK GENMASK(9, 2)
|
|
#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK GENMASK(2, 0)
|
|
#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_IDLE 0
|
|
#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_READ_ENTRY 1
|
|
#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_WRITE_ENTRY 2
|
|
#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE 3
|
|
|
|
/* MII block 3 registers */
|
|
#define VSC73XX_MII_STAT 0x0
|
|
#define VSC73XX_MII_CMD 0x1
|
|
#define VSC73XX_MII_DATA 0x2
|
|
|
|
/* Arbiter block 5 registers */
|
|
#define VSC73XX_ARBEMPTY 0x0c
|
|
#define VSC73XX_ARBDISC 0x0e
|
|
#define VSC73XX_SBACKWDROP 0x12
|
|
#define VSC73XX_DBACKWDROP 0x13
|
|
#define VSC73XX_ARBBURSTPROB 0x15
|
|
|
|
/* System block 7 registers */
|
|
#define VSC73XX_ICPU_SIPAD 0x01
|
|
#define VSC73XX_GMIIDELAY 0x05
|
|
#define VSC73XX_ICPU_CTRL 0x10
|
|
#define VSC73XX_ICPU_ADDR 0x11
|
|
#define VSC73XX_ICPU_SRAM 0x12
|
|
#define VSC73XX_HWSEM 0x13
|
|
#define VSC73XX_GLORESET 0x14
|
|
#define VSC73XX_ICPU_MBOX_VAL 0x15
|
|
#define VSC73XX_ICPU_MBOX_SET 0x16
|
|
#define VSC73XX_ICPU_MBOX_CLR 0x17
|
|
#define VSC73XX_CHIPID 0x18
|
|
#define VSC73XX_GPIO 0x34
|
|
|
|
#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_NONE 0
|
|
#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_1_4_NS 1
|
|
#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_1_7_NS 2
|
|
#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS 3
|
|
|
|
#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_NONE (0 << 4)
|
|
#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_1_4_NS (1 << 4)
|
|
#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_1_7_NS (2 << 4)
|
|
#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS (3 << 4)
|
|
|
|
#define VSC73XX_ICPU_CTRL_WATCHDOG_RST BIT(31)
|
|
#define VSC73XX_ICPU_CTRL_CLK_DIV_MASK GENMASK(12, 8)
|
|
#define VSC73XX_ICPU_CTRL_SRST_HOLD BIT(7)
|
|
#define VSC73XX_ICPU_CTRL_ICPU_PI_EN BIT(6)
|
|
#define VSC73XX_ICPU_CTRL_BOOT_EN BIT(3)
|
|
#define VSC73XX_ICPU_CTRL_EXT_ACC_EN BIT(2)
|
|
#define VSC73XX_ICPU_CTRL_CLK_EN BIT(1)
|
|
#define VSC73XX_ICPU_CTRL_SRST BIT(0)
|
|
|
|
#define VSC73XX_CHIPID_ID_SHIFT 12
|
|
#define VSC73XX_CHIPID_ID_MASK 0xffff
|
|
#define VSC73XX_CHIPID_REV_SHIFT 28
|
|
#define VSC73XX_CHIPID_REV_MASK 0xf
|
|
#define VSC73XX_CHIPID_ID_7385 0x7385
|
|
#define VSC73XX_CHIPID_ID_7388 0x7388
|
|
#define VSC73XX_CHIPID_ID_7395 0x7395
|
|
#define VSC73XX_CHIPID_ID_7398 0x7398
|
|
|
|
#define VSC73XX_GLORESET_STROBE BIT(4)
|
|
#define VSC73XX_GLORESET_ICPU_LOCK BIT(3)
|
|
#define VSC73XX_GLORESET_MEM_LOCK BIT(2)
|
|
#define VSC73XX_GLORESET_PHY_RESET BIT(1)
|
|
#define VSC73XX_GLORESET_MASTER_RESET BIT(0)
|
|
|
|
#define VSC73XX_CMD_MODE_READ 0
|
|
#define VSC73XX_CMD_MODE_WRITE 1
|
|
#define VSC73XX_CMD_MODE_SHIFT 4
|
|
#define VSC73XX_CMD_BLOCK_SHIFT 5
|
|
#define VSC73XX_CMD_BLOCK_MASK 0x7
|
|
#define VSC73XX_CMD_SUBBLOCK_MASK 0xf
|
|
|
|
#define VSC7385_CLOCK_DELAY ((3 << 4) | 3)
|
|
#define VSC7385_CLOCK_DELAY_MASK ((3 << 4) | 3)
|
|
|
|
#define VSC73XX_ICPU_CTRL_STOP (VSC73XX_ICPU_CTRL_SRST_HOLD | \
|
|
VSC73XX_ICPU_CTRL_BOOT_EN | \
|
|
VSC73XX_ICPU_CTRL_EXT_ACC_EN)
|
|
|
|
#define VSC73XX_ICPU_CTRL_START (VSC73XX_ICPU_CTRL_CLK_DIV | \
|
|
VSC73XX_ICPU_CTRL_BOOT_EN | \
|
|
VSC73XX_ICPU_CTRL_CLK_EN | \
|
|
VSC73XX_ICPU_CTRL_SRST)
|
|
|
|
/**
|
|
* struct vsc73xx - VSC73xx state container
|
|
*/
|
|
struct vsc73xx {
|
|
struct device *dev;
|
|
struct gpio_desc *reset;
|
|
struct spi_device *spi;
|
|
struct dsa_switch *ds;
|
|
struct gpio_chip gc;
|
|
u16 chipid;
|
|
u8 addr[ETH_ALEN];
|
|
struct mutex lock; /* Protects SPI traffic */
|
|
};
|
|
|
|
#define IS_7385(a) ((a)->chipid == VSC73XX_CHIPID_ID_7385)
|
|
#define IS_7388(a) ((a)->chipid == VSC73XX_CHIPID_ID_7388)
|
|
#define IS_7395(a) ((a)->chipid == VSC73XX_CHIPID_ID_7395)
|
|
#define IS_7398(a) ((a)->chipid == VSC73XX_CHIPID_ID_7398)
|
|
#define IS_739X(a) (IS_7395(a) || IS_7398(a))
|
|
|
|
struct vsc73xx_counter {
|
|
u8 counter;
|
|
const char *name;
|
|
};
|
|
|
|
/* Counters are named according to the MIB standards where applicable.
|
|
* Some counters are custom, non-standard. The standard counters are
|
|
* named in accordance with RFC2819, RFC2021 and IEEE Std 802.3-2002 Annex
|
|
* 30A Counters.
|
|
*/
|
|
static const struct vsc73xx_counter vsc73xx_rx_counters[] = {
|
|
{ 0, "RxEtherStatsPkts" },
|
|
{ 1, "RxBroadcast+MulticastPkts" }, /* non-standard counter */
|
|
{ 2, "RxTotalErrorPackets" }, /* non-standard counter */
|
|
{ 3, "RxEtherStatsBroadcastPkts" },
|
|
{ 4, "RxEtherStatsMulticastPkts" },
|
|
{ 5, "RxEtherStatsPkts64Octets" },
|
|
{ 6, "RxEtherStatsPkts65to127Octets" },
|
|
{ 7, "RxEtherStatsPkts128to255Octets" },
|
|
{ 8, "RxEtherStatsPkts256to511Octets" },
|
|
{ 9, "RxEtherStatsPkts512to1023Octets" },
|
|
{ 10, "RxEtherStatsPkts1024to1518Octets" },
|
|
{ 11, "RxJumboFrames" }, /* non-standard counter */
|
|
{ 12, "RxaPauseMACControlFramesTransmitted" },
|
|
{ 13, "RxFIFODrops" }, /* non-standard counter */
|
|
{ 14, "RxBackwardDrops" }, /* non-standard counter */
|
|
{ 15, "RxClassifierDrops" }, /* non-standard counter */
|
|
{ 16, "RxEtherStatsCRCAlignErrors" },
|
|
{ 17, "RxEtherStatsUndersizePkts" },
|
|
{ 18, "RxEtherStatsOversizePkts" },
|
|
{ 19, "RxEtherStatsFragments" },
|
|
{ 20, "RxEtherStatsJabbers" },
|
|
{ 21, "RxaMACControlFramesReceived" },
|
|
/* 22-24 are undefined */
|
|
{ 25, "RxaFramesReceivedOK" },
|
|
{ 26, "RxQoSClass0" }, /* non-standard counter */
|
|
{ 27, "RxQoSClass1" }, /* non-standard counter */
|
|
{ 28, "RxQoSClass2" }, /* non-standard counter */
|
|
{ 29, "RxQoSClass3" }, /* non-standard counter */
|
|
};
|
|
|
|
static const struct vsc73xx_counter vsc73xx_tx_counters[] = {
|
|
{ 0, "TxEtherStatsPkts" },
|
|
{ 1, "TxBroadcast+MulticastPkts" }, /* non-standard counter */
|
|
{ 2, "TxTotalErrorPackets" }, /* non-standard counter */
|
|
{ 3, "TxEtherStatsBroadcastPkts" },
|
|
{ 4, "TxEtherStatsMulticastPkts" },
|
|
{ 5, "TxEtherStatsPkts64Octets" },
|
|
{ 6, "TxEtherStatsPkts65to127Octets" },
|
|
{ 7, "TxEtherStatsPkts128to255Octets" },
|
|
{ 8, "TxEtherStatsPkts256to511Octets" },
|
|
{ 9, "TxEtherStatsPkts512to1023Octets" },
|
|
{ 10, "TxEtherStatsPkts1024to1518Octets" },
|
|
{ 11, "TxJumboFrames" }, /* non-standard counter */
|
|
{ 12, "TxaPauseMACControlFramesTransmitted" },
|
|
{ 13, "TxFIFODrops" }, /* non-standard counter */
|
|
{ 14, "TxDrops" }, /* non-standard counter */
|
|
{ 15, "TxEtherStatsCollisions" },
|
|
{ 16, "TxEtherStatsCRCAlignErrors" },
|
|
{ 17, "TxEtherStatsUndersizePkts" },
|
|
{ 18, "TxEtherStatsOversizePkts" },
|
|
{ 19, "TxEtherStatsFragments" },
|
|
{ 20, "TxEtherStatsJabbers" },
|
|
/* 21-24 are undefined */
|
|
{ 25, "TxaFramesReceivedOK" },
|
|
{ 26, "TxQoSClass0" }, /* non-standard counter */
|
|
{ 27, "TxQoSClass1" }, /* non-standard counter */
|
|
{ 28, "TxQoSClass2" }, /* non-standard counter */
|
|
{ 29, "TxQoSClass3" }, /* non-standard counter */
|
|
};
|
|
|
|
static int vsc73xx_is_addr_valid(u8 block, u8 subblock)
|
|
{
|
|
switch (block) {
|
|
case VSC73XX_BLOCK_MAC:
|
|
switch (subblock) {
|
|
case 0 ... 4:
|
|
case 6:
|
|
return 1;
|
|
}
|
|
break;
|
|
|
|
case VSC73XX_BLOCK_ANALYZER:
|
|
case VSC73XX_BLOCK_SYSTEM:
|
|
switch (subblock) {
|
|
case 0:
|
|
return 1;
|
|
}
|
|
break;
|
|
|
|
case VSC73XX_BLOCK_MII:
|
|
case VSC73XX_BLOCK_CAPTURE:
|
|
case VSC73XX_BLOCK_ARBITER:
|
|
switch (subblock) {
|
|
case 0 ... 1:
|
|
return 1;
|
|
}
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u8 vsc73xx_make_addr(u8 mode, u8 block, u8 subblock)
|
|
{
|
|
u8 ret;
|
|
|
|
ret = (block & VSC73XX_CMD_BLOCK_MASK) << VSC73XX_CMD_BLOCK_SHIFT;
|
|
ret |= (mode & 1) << VSC73XX_CMD_MODE_SHIFT;
|
|
ret |= subblock & VSC73XX_CMD_SUBBLOCK_MASK;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int vsc73xx_read(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
|
|
u32 *val)
|
|
{
|
|
struct spi_transfer t[2];
|
|
struct spi_message m;
|
|
u8 cmd[4];
|
|
u8 buf[4];
|
|
int ret;
|
|
|
|
if (!vsc73xx_is_addr_valid(block, subblock))
|
|
return -EINVAL;
|
|
|
|
spi_message_init(&m);
|
|
|
|
memset(&t, 0, sizeof(t));
|
|
|
|
t[0].tx_buf = cmd;
|
|
t[0].len = sizeof(cmd);
|
|
spi_message_add_tail(&t[0], &m);
|
|
|
|
t[1].rx_buf = buf;
|
|
t[1].len = sizeof(buf);
|
|
spi_message_add_tail(&t[1], &m);
|
|
|
|
cmd[0] = vsc73xx_make_addr(VSC73XX_CMD_MODE_READ, block, subblock);
|
|
cmd[1] = reg;
|
|
cmd[2] = 0;
|
|
cmd[3] = 0;
|
|
|
|
mutex_lock(&vsc->lock);
|
|
ret = spi_sync(vsc->spi, &m);
|
|
mutex_unlock(&vsc->lock);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val = (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vsc73xx_write(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
|
|
u32 val)
|
|
{
|
|
struct spi_transfer t[2];
|
|
struct spi_message m;
|
|
u8 cmd[2];
|
|
u8 buf[4];
|
|
int ret;
|
|
|
|
if (!vsc73xx_is_addr_valid(block, subblock))
|
|
return -EINVAL;
|
|
|
|
spi_message_init(&m);
|
|
|
|
memset(&t, 0, sizeof(t));
|
|
|
|
t[0].tx_buf = cmd;
|
|
t[0].len = sizeof(cmd);
|
|
spi_message_add_tail(&t[0], &m);
|
|
|
|
t[1].tx_buf = buf;
|
|
t[1].len = sizeof(buf);
|
|
spi_message_add_tail(&t[1], &m);
|
|
|
|
cmd[0] = vsc73xx_make_addr(VSC73XX_CMD_MODE_WRITE, block, subblock);
|
|
cmd[1] = reg;
|
|
|
|
buf[0] = (val >> 24) & 0xff;
|
|
buf[1] = (val >> 16) & 0xff;
|
|
buf[2] = (val >> 8) & 0xff;
|
|
buf[3] = val & 0xff;
|
|
|
|
mutex_lock(&vsc->lock);
|
|
ret = spi_sync(vsc->spi, &m);
|
|
mutex_unlock(&vsc->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int vsc73xx_update_bits(struct vsc73xx *vsc, u8 block, u8 subblock,
|
|
u8 reg, u32 mask, u32 val)
|
|
{
|
|
u32 tmp, orig;
|
|
int ret;
|
|
|
|
/* Same read-modify-write algorithm as e.g. regmap */
|
|
ret = vsc73xx_read(vsc, block, subblock, reg, &orig);
|
|
if (ret)
|
|
return ret;
|
|
tmp = orig & ~mask;
|
|
tmp |= val & mask;
|
|
return vsc73xx_write(vsc, block, subblock, reg, tmp);
|
|
}
|
|
|
|
static int vsc73xx_detect(struct vsc73xx *vsc)
|
|
{
|
|
bool icpu_si_boot_en;
|
|
bool icpu_pi_en;
|
|
u32 val;
|
|
u32 rev;
|
|
int ret;
|
|
u32 id;
|
|
|
|
ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
|
|
VSC73XX_ICPU_MBOX_VAL, &val);
|
|
if (ret) {
|
|
dev_err(vsc->dev, "unable to read mailbox (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (val == 0xffffffff) {
|
|
dev_info(vsc->dev, "chip seems dead, assert reset\n");
|
|
gpiod_set_value_cansleep(vsc->reset, 1);
|
|
/* Reset pulse should be 20ns minimum, according to datasheet
|
|
* table 245, so 10us should be fine
|
|
*/
|
|
usleep_range(10, 100);
|
|
gpiod_set_value_cansleep(vsc->reset, 0);
|
|
/* Wait 20ms according to datasheet table 245 */
|
|
msleep(20);
|
|
|
|
ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
|
|
VSC73XX_ICPU_MBOX_VAL, &val);
|
|
if (val == 0xffffffff) {
|
|
dev_err(vsc->dev, "seems not to help, giving up\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
|
|
VSC73XX_CHIPID, &val);
|
|
if (ret) {
|
|
dev_err(vsc->dev, "unable to read chip id (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
id = (val >> VSC73XX_CHIPID_ID_SHIFT) &
|
|
VSC73XX_CHIPID_ID_MASK;
|
|
switch (id) {
|
|
case VSC73XX_CHIPID_ID_7385:
|
|
case VSC73XX_CHIPID_ID_7388:
|
|
case VSC73XX_CHIPID_ID_7395:
|
|
case VSC73XX_CHIPID_ID_7398:
|
|
break;
|
|
default:
|
|
dev_err(vsc->dev, "unsupported chip, id=%04x\n", id);
|
|
return -ENODEV;
|
|
}
|
|
|
|
vsc->chipid = id;
|
|
rev = (val >> VSC73XX_CHIPID_REV_SHIFT) &
|
|
VSC73XX_CHIPID_REV_MASK;
|
|
dev_info(vsc->dev, "VSC%04X (rev: %d) switch found\n", id, rev);
|
|
|
|
ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
|
|
VSC73XX_ICPU_CTRL, &val);
|
|
if (ret) {
|
|
dev_err(vsc->dev, "unable to read iCPU control\n");
|
|
return ret;
|
|
}
|
|
|
|
/* The iCPU can always be used but can boot in different ways.
|
|
* If it is initially disabled and has no external memory,
|
|
* we are in control and can do whatever we like, else we
|
|
* are probably in trouble (we need some way to communicate
|
|
* with the running firmware) so we bail out for now.
|
|
*/
|
|
icpu_pi_en = !!(val & VSC73XX_ICPU_CTRL_ICPU_PI_EN);
|
|
icpu_si_boot_en = !!(val & VSC73XX_ICPU_CTRL_BOOT_EN);
|
|
if (icpu_si_boot_en && icpu_pi_en) {
|
|
dev_err(vsc->dev,
|
|
"iCPU enabled boots from SI, has external memory\n");
|
|
dev_err(vsc->dev, "no idea how to deal with this\n");
|
|
return -ENODEV;
|
|
}
|
|
if (icpu_si_boot_en && !icpu_pi_en) {
|
|
dev_err(vsc->dev,
|
|
"iCPU enabled boots from SI, no external memory\n");
|
|
dev_err(vsc->dev, "no idea how to deal with this\n");
|
|
return -ENODEV;
|
|
}
|
|
if (!icpu_si_boot_en && icpu_pi_en) {
|
|
dev_err(vsc->dev,
|
|
"iCPU enabled, boots from PI external memory\n");
|
|
dev_err(vsc->dev, "no idea how to deal with this\n");
|
|
return -ENODEV;
|
|
}
|
|
/* !icpu_si_boot_en && !cpu_pi_en */
|
|
dev_info(vsc->dev, "iCPU disabled, no external memory\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vsc73xx_phy_read(struct dsa_switch *ds, int phy, int regnum)
|
|
{
|
|
struct vsc73xx *vsc = ds->priv;
|
|
u32 cmd;
|
|
u32 val;
|
|
int ret;
|
|
|
|
/* Setting bit 26 means "read" */
|
|
cmd = BIT(26) | (phy << 21) | (regnum << 16);
|
|
ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd);
|
|
if (ret)
|
|
return ret;
|
|
msleep(2);
|
|
ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MII, 0, 2, &val);
|
|
if (ret)
|
|
return ret;
|
|
if (val & BIT(16)) {
|
|
dev_err(vsc->dev, "reading reg %02x from phy%d failed\n",
|
|
regnum, phy);
|
|
return -EIO;
|
|
}
|
|
val &= 0xFFFFU;
|
|
|
|
dev_dbg(vsc->dev, "read reg %02x from phy%d = %04x\n",
|
|
regnum, phy, val);
|
|
|
|
return val;
|
|
}
|
|
|
|
static int vsc73xx_phy_write(struct dsa_switch *ds, int phy, int regnum,
|
|
u16 val)
|
|
{
|
|
struct vsc73xx *vsc = ds->priv;
|
|
u32 cmd;
|
|
int ret;
|
|
|
|
/* It was found through tedious experiments that this router
|
|
* chip really hates to have it's PHYs reset. They
|
|
* never recover if that happens: autonegotiation stops
|
|
* working after a reset. Just filter out this command.
|
|
* (Resetting the whole chip is OK.)
|
|
*/
|
|
if (regnum == 0 && (val & BIT(15))) {
|
|
dev_info(vsc->dev, "reset PHY - disallowed\n");
|
|
return 0;
|
|
}
|
|
|
|
cmd = (phy << 21) | (regnum << 16);
|
|
ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev_dbg(vsc->dev, "write %04x to reg %02x in phy%d\n",
|
|
val, regnum, phy);
|
|
return 0;
|
|
}
|
|
|
|
static enum dsa_tag_protocol vsc73xx_get_tag_protocol(struct dsa_switch *ds,
|
|
int port)
|
|
{
|
|
/* The switch internally uses a 8 byte header with length,
|
|
* source port, tag, LPA and priority. This is supposedly
|
|
* only accessible when operating the switch using the internal
|
|
* CPU or with an external CPU mapping the device in, but not
|
|
* when operating the switch over SPI and putting frames in/out
|
|
* on port 6 (the CPU port). So far we must assume that we
|
|
* cannot access the tag. (See "Internal frame header" section
|
|
* 3.9.1 in the manual.)
|
|
*/
|
|
return DSA_TAG_PROTO_NONE;
|
|
}
|
|
|
|
static int vsc73xx_setup(struct dsa_switch *ds)
|
|
{
|
|
struct vsc73xx *vsc = ds->priv;
|
|
int i;
|
|
|
|
dev_info(vsc->dev, "set up the switch\n");
|
|
|
|
/* Issue RESET */
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
|
|
VSC73XX_GLORESET_MASTER_RESET);
|
|
usleep_range(125, 200);
|
|
|
|
/* Initialize memory, initialize RAM bank 0..15 except 6 and 7
|
|
* This sequence appears in the
|
|
* VSC7385 SparX-G5 datasheet section 6.6.1
|
|
* VSC7395 SparX-G5e datasheet section 6.6.1
|
|
* "initialization sequence".
|
|
* No explanation is given to the 0x1010400 magic number.
|
|
*/
|
|
for (i = 0; i <= 15; i++) {
|
|
if (i != 6 && i != 7) {
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_MEMINIT,
|
|
2,
|
|
0, 0x1010400 + i);
|
|
mdelay(1);
|
|
}
|
|
}
|
|
mdelay(30);
|
|
|
|
/* Clear MAC table */
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0,
|
|
VSC73XX_MACACCESS,
|
|
VSC73XX_MACACCESS_CMD_CLEAR_TABLE);
|
|
|
|
/* Clear VLAN table */
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0,
|
|
VSC73XX_VLANACCESS,
|
|
VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE);
|
|
|
|
msleep(40);
|
|
|
|
/* Use 20KiB buffers on all ports on VSC7395
|
|
* The VSC7385 has 16KiB buffers and that is the
|
|
* default if we don't set this up explicitly.
|
|
* Port "31" is "all ports".
|
|
*/
|
|
if (IS_739X(vsc))
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 0x1f,
|
|
VSC73XX_Q_MISC_CONF,
|
|
VSC73XX_Q_MISC_CONF_EXTENT_MEM);
|
|
|
|
/* Put all ports into reset until enabled */
|
|
for (i = 0; i < 7; i++) {
|
|
if (i == 5)
|
|
continue;
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 4,
|
|
VSC73XX_MAC_CFG, VSC73XX_MAC_CFG_RESET);
|
|
}
|
|
|
|
/* MII delay, set both GTX and RX delay to 2 ns */
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GMIIDELAY,
|
|
VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS |
|
|
VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS);
|
|
/* Enable reception of frames on all ports */
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_RECVMASK,
|
|
0x5f);
|
|
/* IP multicast flood mask (table 144) */
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_IFLODMSK,
|
|
0xff);
|
|
|
|
mdelay(50);
|
|
|
|
/* Release reset from the internal PHYs */
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
|
|
VSC73XX_GLORESET_PHY_RESET);
|
|
|
|
udelay(4);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void vsc73xx_init_port(struct vsc73xx *vsc, int port)
|
|
{
|
|
u32 val;
|
|
|
|
/* MAC configure, first reset the port and then write defaults */
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
|
|
port,
|
|
VSC73XX_MAC_CFG,
|
|
VSC73XX_MAC_CFG_RESET);
|
|
|
|
/* Take up the port in 1Gbit mode by default, this will be
|
|
* augmented after auto-negotiation on the PHY-facing
|
|
* ports.
|
|
*/
|
|
if (port == CPU_PORT)
|
|
val = VSC73XX_MAC_CFG_1000M_F_RGMII;
|
|
else
|
|
val = VSC73XX_MAC_CFG_1000M_F_PHY;
|
|
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
|
|
port,
|
|
VSC73XX_MAC_CFG,
|
|
val |
|
|
VSC73XX_MAC_CFG_TX_EN |
|
|
VSC73XX_MAC_CFG_RX_EN);
|
|
|
|
/* Max length, we can do up to 9.6 KiB, so allow that.
|
|
* According to application not "VSC7398 Jumbo Frames" setting
|
|
* up the MTU to 9.6 KB does not affect the performance on standard
|
|
* frames, so just enable it. It is clear from the application note
|
|
* that "9.6 kilobytes" == 9600 bytes.
|
|
*/
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
|
|
port,
|
|
VSC73XX_MAXLEN, 9600);
|
|
|
|
/* Flow control for the CPU port:
|
|
* Use a zero delay pause frame when pause condition is left
|
|
* Obey pause control frames
|
|
*/
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
|
|
port,
|
|
VSC73XX_FCCONF,
|
|
VSC73XX_FCCONF_ZERO_PAUSE_EN |
|
|
VSC73XX_FCCONF_FLOW_CTRL_OBEY);
|
|
|
|
/* Issue pause control frames on PHY facing ports.
|
|
* Allow early initiation of MAC transmission if the amount
|
|
* of egress data is below 512 bytes on CPU port.
|
|
* FIXME: enable 20KiB buffers?
|
|
*/
|
|
if (port == CPU_PORT)
|
|
val = VSC73XX_Q_MISC_CONF_EARLY_TX_512;
|
|
else
|
|
val = VSC73XX_Q_MISC_CONF_MAC_PAUSE_MODE;
|
|
val |= VSC73XX_Q_MISC_CONF_EXTENT_MEM;
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
|
|
port,
|
|
VSC73XX_Q_MISC_CONF,
|
|
val);
|
|
|
|
/* Flow control MAC: a MAC address used in flow control frames */
|
|
val = (vsc->addr[5] << 16) | (vsc->addr[4] << 8) | (vsc->addr[3]);
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
|
|
port,
|
|
VSC73XX_FCMACHI,
|
|
val);
|
|
val = (vsc->addr[2] << 16) | (vsc->addr[1] << 8) | (vsc->addr[0]);
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
|
|
port,
|
|
VSC73XX_FCMACLO,
|
|
val);
|
|
|
|
/* Tell the categorizer to forward pause frames, not control
|
|
* frame. Do not drop anything.
|
|
*/
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
|
|
port,
|
|
VSC73XX_CAT_DROP,
|
|
VSC73XX_CAT_DROP_FWD_PAUSE_ENA);
|
|
|
|
/* Clear all counters */
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
|
|
port, VSC73XX_C_RX0, 0);
|
|
}
|
|
|
|
static void vsc73xx_adjust_enable_port(struct vsc73xx *vsc,
|
|
int port, struct phy_device *phydev,
|
|
u32 initval)
|
|
{
|
|
u32 val = initval;
|
|
u8 seed;
|
|
|
|
/* Reset this port FIXME: break out subroutine */
|
|
val |= VSC73XX_MAC_CFG_RESET;
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val);
|
|
|
|
/* Seed the port randomness with randomness */
|
|
get_random_bytes(&seed, 1);
|
|
val |= seed << VSC73XX_MAC_CFG_SEED_OFFSET;
|
|
val |= VSC73XX_MAC_CFG_SEED_LOAD;
|
|
val |= VSC73XX_MAC_CFG_WEXC_DIS;
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val);
|
|
|
|
/* Flow control for the PHY facing ports:
|
|
* Use a zero delay pause frame when pause condition is left
|
|
* Obey pause control frames
|
|
* When generating pause frames, use 0xff as pause value
|
|
*/
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_FCCONF,
|
|
VSC73XX_FCCONF_ZERO_PAUSE_EN |
|
|
VSC73XX_FCCONF_FLOW_CTRL_OBEY |
|
|
0xff);
|
|
|
|
/* Disallow backward dropping of frames from this port */
|
|
vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
|
|
VSC73XX_SBACKWDROP, BIT(port), 0);
|
|
|
|
/* Enable TX, RX, deassert reset, stop loading seed */
|
|
vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
|
|
VSC73XX_MAC_CFG,
|
|
VSC73XX_MAC_CFG_RESET | VSC73XX_MAC_CFG_SEED_LOAD |
|
|
VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN,
|
|
VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN);
|
|
}
|
|
|
|
static void vsc73xx_adjust_link(struct dsa_switch *ds, int port,
|
|
struct phy_device *phydev)
|
|
{
|
|
struct vsc73xx *vsc = ds->priv;
|
|
u32 val;
|
|
|
|
/* Special handling of the CPU-facing port */
|
|
if (port == CPU_PORT) {
|
|
/* Other ports are already initialized but not this one */
|
|
vsc73xx_init_port(vsc, CPU_PORT);
|
|
/* Select the external port for this interface (EXT_PORT)
|
|
* Enable the GMII GTX external clock
|
|
* Use double data rate (DDR mode)
|
|
*/
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
|
|
CPU_PORT,
|
|
VSC73XX_ADVPORTM,
|
|
VSC73XX_ADVPORTM_EXT_PORT |
|
|
VSC73XX_ADVPORTM_ENA_GTX |
|
|
VSC73XX_ADVPORTM_DDR_MODE);
|
|
}
|
|
|
|
/* This is the MAC confiuration that always need to happen
|
|
* after a PHY or the CPU port comes up or down.
|
|
*/
|
|
if (!phydev->link) {
|
|
int maxloop = 10;
|
|
|
|
dev_dbg(vsc->dev, "port %d: went down\n",
|
|
port);
|
|
|
|
/* Disable RX on this port */
|
|
vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
|
|
VSC73XX_MAC_CFG,
|
|
VSC73XX_MAC_CFG_RX_EN, 0);
|
|
|
|
/* Discard packets */
|
|
vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
|
|
VSC73XX_ARBDISC, BIT(port), BIT(port));
|
|
|
|
/* Wait until queue is empty */
|
|
vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0,
|
|
VSC73XX_ARBEMPTY, &val);
|
|
while (!(val & BIT(port))) {
|
|
msleep(1);
|
|
vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0,
|
|
VSC73XX_ARBEMPTY, &val);
|
|
if (--maxloop == 0) {
|
|
dev_err(vsc->dev,
|
|
"timeout waiting for block arbiter\n");
|
|
/* Continue anyway */
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Put this port into reset */
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG,
|
|
VSC73XX_MAC_CFG_RESET);
|
|
|
|
/* Accept packets again */
|
|
vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
|
|
VSC73XX_ARBDISC, BIT(port), 0);
|
|
|
|
/* Allow backward dropping of frames from this port */
|
|
vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
|
|
VSC73XX_SBACKWDROP, BIT(port), BIT(port));
|
|
|
|
/* Receive mask (disable forwarding) */
|
|
vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
|
|
VSC73XX_RECVMASK, BIT(port), 0);
|
|
|
|
return;
|
|
}
|
|
|
|
/* Figure out what speed was negotiated */
|
|
if (phydev->speed == SPEED_1000) {
|
|
dev_dbg(vsc->dev, "port %d: 1000 Mbit mode full duplex\n",
|
|
port);
|
|
|
|
/* Set up default for internal port or external RGMII */
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
|
|
val = VSC73XX_MAC_CFG_1000M_F_RGMII;
|
|
else
|
|
val = VSC73XX_MAC_CFG_1000M_F_PHY;
|
|
vsc73xx_adjust_enable_port(vsc, port, phydev, val);
|
|
} else if (phydev->speed == SPEED_100) {
|
|
if (phydev->duplex == DUPLEX_FULL) {
|
|
val = VSC73XX_MAC_CFG_100_10M_F_PHY;
|
|
dev_dbg(vsc->dev,
|
|
"port %d: 100 Mbit full duplex mode\n",
|
|
port);
|
|
} else {
|
|
val = VSC73XX_MAC_CFG_100_10M_H_PHY;
|
|
dev_dbg(vsc->dev,
|
|
"port %d: 100 Mbit half duplex mode\n",
|
|
port);
|
|
}
|
|
vsc73xx_adjust_enable_port(vsc, port, phydev, val);
|
|
} else if (phydev->speed == SPEED_10) {
|
|
if (phydev->duplex == DUPLEX_FULL) {
|
|
val = VSC73XX_MAC_CFG_100_10M_F_PHY;
|
|
dev_dbg(vsc->dev,
|
|
"port %d: 10 Mbit full duplex mode\n",
|
|
port);
|
|
} else {
|
|
val = VSC73XX_MAC_CFG_100_10M_H_PHY;
|
|
dev_dbg(vsc->dev,
|
|
"port %d: 10 Mbit half duplex mode\n",
|
|
port);
|
|
}
|
|
vsc73xx_adjust_enable_port(vsc, port, phydev, val);
|
|
} else {
|
|
dev_err(vsc->dev,
|
|
"could not adjust link: unknown speed\n");
|
|
}
|
|
|
|
/* Enable port (forwarding) in the receieve mask */
|
|
vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
|
|
VSC73XX_RECVMASK, BIT(port), BIT(port));
|
|
}
|
|
|
|
static int vsc73xx_port_enable(struct dsa_switch *ds, int port,
|
|
struct phy_device *phy)
|
|
{
|
|
struct vsc73xx *vsc = ds->priv;
|
|
|
|
dev_info(vsc->dev, "enable port %d\n", port);
|
|
vsc73xx_init_port(vsc, port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void vsc73xx_port_disable(struct dsa_switch *ds, int port,
|
|
struct phy_device *phy)
|
|
{
|
|
struct vsc73xx *vsc = ds->priv;
|
|
|
|
/* Just put the port into reset */
|
|
vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port,
|
|
VSC73XX_MAC_CFG, VSC73XX_MAC_CFG_RESET);
|
|
}
|
|
|
|
static const struct vsc73xx_counter *
|
|
vsc73xx_find_counter(struct vsc73xx *vsc,
|
|
u8 counter,
|
|
bool tx)
|
|
{
|
|
const struct vsc73xx_counter *cnts;
|
|
int num_cnts;
|
|
int i;
|
|
|
|
if (tx) {
|
|
cnts = vsc73xx_tx_counters;
|
|
num_cnts = ARRAY_SIZE(vsc73xx_tx_counters);
|
|
} else {
|
|
cnts = vsc73xx_rx_counters;
|
|
num_cnts = ARRAY_SIZE(vsc73xx_rx_counters);
|
|
}
|
|
|
|
for (i = 0; i < num_cnts; i++) {
|
|
const struct vsc73xx_counter *cnt;
|
|
|
|
cnt = &cnts[i];
|
|
if (cnt->counter == counter)
|
|
return cnt;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void vsc73xx_get_strings(struct dsa_switch *ds, int port, u32 stringset,
|
|
uint8_t *data)
|
|
{
|
|
const struct vsc73xx_counter *cnt;
|
|
struct vsc73xx *vsc = ds->priv;
|
|
u8 indices[6];
|
|
int i, j;
|
|
u32 val;
|
|
int ret;
|
|
|
|
if (stringset != ETH_SS_STATS)
|
|
return;
|
|
|
|
ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MAC, port,
|
|
VSC73XX_C_CFG, &val);
|
|
if (ret)
|
|
return;
|
|
|
|
indices[0] = (val & 0x1f); /* RX counter 0 */
|
|
indices[1] = ((val >> 5) & 0x1f); /* RX counter 1 */
|
|
indices[2] = ((val >> 10) & 0x1f); /* RX counter 2 */
|
|
indices[3] = ((val >> 16) & 0x1f); /* TX counter 0 */
|
|
indices[4] = ((val >> 21) & 0x1f); /* TX counter 1 */
|
|
indices[5] = ((val >> 26) & 0x1f); /* TX counter 2 */
|
|
|
|
/* The first counters is the RX octets */
|
|
j = 0;
|
|
strncpy(data + j * ETH_GSTRING_LEN,
|
|
"RxEtherStatsOctets", ETH_GSTRING_LEN);
|
|
j++;
|
|
|
|
/* Each port supports recording 3 RX counters and 3 TX counters,
|
|
* figure out what counters we use in this set-up and return the
|
|
* names of them. The hardware default counters will be number of
|
|
* packets on RX/TX, combined broadcast+multicast packets RX/TX and
|
|
* total error packets RX/TX.
|
|
*/
|
|
for (i = 0; i < 3; i++) {
|
|
cnt = vsc73xx_find_counter(vsc, indices[i], false);
|
|
if (cnt)
|
|
strncpy(data + j * ETH_GSTRING_LEN,
|
|
cnt->name, ETH_GSTRING_LEN);
|
|
j++;
|
|
}
|
|
|
|
/* TX stats begins with the number of TX octets */
|
|
strncpy(data + j * ETH_GSTRING_LEN,
|
|
"TxEtherStatsOctets", ETH_GSTRING_LEN);
|
|
j++;
|
|
|
|
for (i = 3; i < 6; i++) {
|
|
cnt = vsc73xx_find_counter(vsc, indices[i], true);
|
|
if (cnt)
|
|
strncpy(data + j * ETH_GSTRING_LEN,
|
|
cnt->name, ETH_GSTRING_LEN);
|
|
j++;
|
|
}
|
|
}
|
|
|
|
static int vsc73xx_get_sset_count(struct dsa_switch *ds, int port, int sset)
|
|
{
|
|
/* We only support SS_STATS */
|
|
if (sset != ETH_SS_STATS)
|
|
return 0;
|
|
/* RX and TX packets, then 3 RX counters, 3 TX counters */
|
|
return 8;
|
|
}
|
|
|
|
static void vsc73xx_get_ethtool_stats(struct dsa_switch *ds, int port,
|
|
uint64_t *data)
|
|
{
|
|
struct vsc73xx *vsc = ds->priv;
|
|
u8 regs[] = {
|
|
VSC73XX_RXOCT,
|
|
VSC73XX_C_RX0,
|
|
VSC73XX_C_RX1,
|
|
VSC73XX_C_RX2,
|
|
VSC73XX_TXOCT,
|
|
VSC73XX_C_TX0,
|
|
VSC73XX_C_TX1,
|
|
VSC73XX_C_TX2,
|
|
};
|
|
u32 val;
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(regs); i++) {
|
|
ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MAC, port,
|
|
regs[i], &val);
|
|
if (ret) {
|
|
dev_err(vsc->dev, "error reading counter %d\n", i);
|
|
return;
|
|
}
|
|
data[i] = val;
|
|
}
|
|
}
|
|
|
|
static const struct dsa_switch_ops vsc73xx_ds_ops = {
|
|
.get_tag_protocol = vsc73xx_get_tag_protocol,
|
|
.setup = vsc73xx_setup,
|
|
.phy_read = vsc73xx_phy_read,
|
|
.phy_write = vsc73xx_phy_write,
|
|
.adjust_link = vsc73xx_adjust_link,
|
|
.get_strings = vsc73xx_get_strings,
|
|
.get_ethtool_stats = vsc73xx_get_ethtool_stats,
|
|
.get_sset_count = vsc73xx_get_sset_count,
|
|
.port_enable = vsc73xx_port_enable,
|
|
.port_disable = vsc73xx_port_disable,
|
|
};
|
|
|
|
static int vsc73xx_gpio_get(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct vsc73xx *vsc = gpiochip_get_data(chip);
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
|
|
VSC73XX_GPIO, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return !!(val & BIT(offset));
|
|
}
|
|
|
|
static void vsc73xx_gpio_set(struct gpio_chip *chip, unsigned int offset,
|
|
int val)
|
|
{
|
|
struct vsc73xx *vsc = gpiochip_get_data(chip);
|
|
u32 tmp = val ? BIT(offset) : 0;
|
|
|
|
vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0,
|
|
VSC73XX_GPIO, BIT(offset), tmp);
|
|
}
|
|
|
|
static int vsc73xx_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned int offset, int val)
|
|
{
|
|
struct vsc73xx *vsc = gpiochip_get_data(chip);
|
|
u32 tmp = val ? BIT(offset) : 0;
|
|
|
|
return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0,
|
|
VSC73XX_GPIO, BIT(offset + 4) | BIT(offset),
|
|
BIT(offset + 4) | tmp);
|
|
}
|
|
|
|
static int vsc73xx_gpio_direction_input(struct gpio_chip *chip,
|
|
unsigned int offset)
|
|
{
|
|
struct vsc73xx *vsc = gpiochip_get_data(chip);
|
|
|
|
return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0,
|
|
VSC73XX_GPIO, BIT(offset + 4),
|
|
0);
|
|
}
|
|
|
|
static int vsc73xx_gpio_get_direction(struct gpio_chip *chip,
|
|
unsigned int offset)
|
|
{
|
|
struct vsc73xx *vsc = gpiochip_get_data(chip);
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
|
|
VSC73XX_GPIO, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return !(val & BIT(offset + 4));
|
|
}
|
|
|
|
static int vsc73xx_gpio_probe(struct vsc73xx *vsc)
|
|
{
|
|
int ret;
|
|
|
|
vsc->gc.label = devm_kasprintf(vsc->dev, GFP_KERNEL, "VSC%04x",
|
|
vsc->chipid);
|
|
vsc->gc.ngpio = 4;
|
|
vsc->gc.owner = THIS_MODULE;
|
|
vsc->gc.parent = vsc->dev;
|
|
vsc->gc.of_node = vsc->dev->of_node;
|
|
vsc->gc.base = -1;
|
|
vsc->gc.get = vsc73xx_gpio_get;
|
|
vsc->gc.set = vsc73xx_gpio_set;
|
|
vsc->gc.direction_input = vsc73xx_gpio_direction_input;
|
|
vsc->gc.direction_output = vsc73xx_gpio_direction_output;
|
|
vsc->gc.get_direction = vsc73xx_gpio_get_direction;
|
|
vsc->gc.can_sleep = true;
|
|
ret = devm_gpiochip_add_data(vsc->dev, &vsc->gc, vsc);
|
|
if (ret) {
|
|
dev_err(vsc->dev, "unable to register GPIO chip\n");
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int vsc73xx_probe(struct spi_device *spi)
|
|
{
|
|
struct device *dev = &spi->dev;
|
|
struct vsc73xx *vsc;
|
|
int ret;
|
|
|
|
vsc = devm_kzalloc(dev, sizeof(*vsc), GFP_KERNEL);
|
|
if (!vsc)
|
|
return -ENOMEM;
|
|
|
|
spi_set_drvdata(spi, vsc);
|
|
vsc->spi = spi_dev_get(spi);
|
|
vsc->dev = dev;
|
|
mutex_init(&vsc->lock);
|
|
|
|
/* Release reset, if any */
|
|
vsc->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
|
|
if (IS_ERR(vsc->reset)) {
|
|
dev_err(dev, "failed to get RESET GPIO\n");
|
|
return PTR_ERR(vsc->reset);
|
|
}
|
|
if (vsc->reset)
|
|
/* Wait 20ms according to datasheet table 245 */
|
|
msleep(20);
|
|
|
|
spi->mode = SPI_MODE_0;
|
|
spi->bits_per_word = 8;
|
|
ret = spi_setup(spi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "spi setup failed.\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = vsc73xx_detect(vsc);
|
|
if (ret) {
|
|
dev_err(dev, "no chip found (%d)\n", ret);
|
|
return -ENODEV;
|
|
}
|
|
|
|
eth_random_addr(vsc->addr);
|
|
dev_info(vsc->dev,
|
|
"MAC for control frames: %02X:%02X:%02X:%02X:%02X:%02X\n",
|
|
vsc->addr[0], vsc->addr[1], vsc->addr[2],
|
|
vsc->addr[3], vsc->addr[4], vsc->addr[5]);
|
|
|
|
/* The VSC7395 switch chips have 5+1 ports which means 5
|
|
* ordinary ports and a sixth CPU port facing the processor
|
|
* with an RGMII interface. These ports are numbered 0..4
|
|
* and 6, so they leave a "hole" in the port map for port 5,
|
|
* which is invalid.
|
|
*
|
|
* The VSC7398 has 8 ports, port 7 is again the CPU port.
|
|
*
|
|
* We allocate 8 ports and avoid access to the nonexistant
|
|
* ports.
|
|
*/
|
|
vsc->ds = dsa_switch_alloc(dev, 8);
|
|
if (!vsc->ds)
|
|
return -ENOMEM;
|
|
vsc->ds->priv = vsc;
|
|
|
|
vsc->ds->ops = &vsc73xx_ds_ops;
|
|
ret = dsa_register_switch(vsc->ds);
|
|
if (ret) {
|
|
dev_err(dev, "unable to register switch (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = vsc73xx_gpio_probe(vsc);
|
|
if (ret) {
|
|
dsa_unregister_switch(vsc->ds);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vsc73xx_remove(struct spi_device *spi)
|
|
{
|
|
struct vsc73xx *vsc = spi_get_drvdata(spi);
|
|
|
|
dsa_unregister_switch(vsc->ds);
|
|
gpiod_set_value(vsc->reset, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id vsc73xx_of_match[] = {
|
|
{
|
|
.compatible = "vitesse,vsc7385",
|
|
},
|
|
{
|
|
.compatible = "vitesse,vsc7388",
|
|
},
|
|
{
|
|
.compatible = "vitesse,vsc7395",
|
|
},
|
|
{
|
|
.compatible = "vitesse,vsc7398",
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, vsc73xx_of_match);
|
|
|
|
static struct spi_driver vsc73xx_driver = {
|
|
.probe = vsc73xx_probe,
|
|
.remove = vsc73xx_remove,
|
|
.driver = {
|
|
.name = "vsc73xx",
|
|
.of_match_table = vsc73xx_of_match,
|
|
},
|
|
};
|
|
module_spi_driver(vsc73xx_driver);
|
|
|
|
MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
|
|
MODULE_DESCRIPTION("Vitesse VSC7385/7388/7395/7398 driver");
|
|
MODULE_LICENSE("GPL v2");
|