mirror of
https://github.com/torvalds/linux.git
synced 2024-12-21 02:21:36 +00:00
528222d853
rc-core kapi uses nanoseconds for infrared durations for receiving, and microseconds for sending. The uapi already uses microseconds for both, so this patch does not change the uapi. Infrared durations do not need nanosecond resolution. IR protocols do not have durations shorter than about 100 microseconds. Some IR hardware offers 250 microseconds resolution, which is sufficient for most protocols. Better hardware has 50 microsecond resolution and is enough for every protocol I am aware off. Unify on microseconds everywhere. This simplifies the code since less conversion between microseconds and nanoseconds needs to be done. This affects: - rx_resolution member of struct rc_dev - timeout member of struct rc_dev - duration member in struct ir_raw_event Cc: "Bruno Prémont" <bonbons@linux-vserver.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Patrick Lerda <patrick9876@free.fr> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "David Härdeman" <david@hardeman.nu> Cc: Benjamin Valentin <benpicco@googlemail.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
409 lines
9.7 KiB
C
409 lines
9.7 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2014 Linaro Ltd.
|
|
* Copyright (c) 2014 Hisilicon Limited.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <media/rc-core.h>
|
|
|
|
#define IR_ENABLE 0x00
|
|
#define IR_CONFIG 0x04
|
|
#define CNT_LEADS 0x08
|
|
#define CNT_LEADE 0x0c
|
|
#define CNT_SLEADE 0x10
|
|
#define CNT0_B 0x14
|
|
#define CNT1_B 0x18
|
|
#define IR_BUSY 0x1c
|
|
#define IR_DATAH 0x20
|
|
#define IR_DATAL 0x24
|
|
#define IR_INTM 0x28
|
|
#define IR_INTS 0x2c
|
|
#define IR_INTC 0x30
|
|
#define IR_START 0x34
|
|
|
|
/* interrupt mask */
|
|
#define INTMS_SYMBRCV (BIT(24) | BIT(8))
|
|
#define INTMS_TIMEOUT (BIT(25) | BIT(9))
|
|
#define INTMS_OVERFLOW (BIT(26) | BIT(10))
|
|
#define INT_CLR_OVERFLOW BIT(18)
|
|
#define INT_CLR_TIMEOUT BIT(17)
|
|
#define INT_CLR_RCV BIT(16)
|
|
#define INT_CLR_RCVTIMEOUT (BIT(16) | BIT(17))
|
|
|
|
#define IR_CLK_ENABLE BIT(4)
|
|
#define IR_CLK_RESET BIT(5)
|
|
|
|
/* IR_ENABLE register bits */
|
|
#define IR_ENABLE_EN BIT(0)
|
|
#define IR_ENABLE_EN_EXTRA BIT(8)
|
|
|
|
#define IR_CFG_WIDTH_MASK 0xffff
|
|
#define IR_CFG_WIDTH_SHIFT 16
|
|
#define IR_CFG_FORMAT_MASK 0x3
|
|
#define IR_CFG_FORMAT_SHIFT 14
|
|
#define IR_CFG_INT_LEVEL_MASK 0x3f
|
|
#define IR_CFG_INT_LEVEL_SHIFT 8
|
|
/* only support raw mode */
|
|
#define IR_CFG_MODE_RAW BIT(7)
|
|
#define IR_CFG_FREQ_MASK 0x7f
|
|
#define IR_CFG_FREQ_SHIFT 0
|
|
#define IR_CFG_INT_THRESHOLD 1
|
|
/* symbol start from low to high, symbol stream end at high*/
|
|
#define IR_CFG_SYMBOL_FMT 0
|
|
#define IR_CFG_SYMBOL_MAXWIDTH 0x3e80
|
|
|
|
#define IR_HIX5HD2_NAME "hix5hd2-ir"
|
|
|
|
/* Need to set extra bit for enabling IR */
|
|
#define HIX5HD2_FLAG_EXTRA_ENABLE BIT(0)
|
|
|
|
struct hix5hd2_soc_data {
|
|
u32 clk_reg;
|
|
u32 flags;
|
|
};
|
|
|
|
static const struct hix5hd2_soc_data hix5hd2_data = {
|
|
.clk_reg = 0x48,
|
|
};
|
|
|
|
static const struct hix5hd2_soc_data hi3796cv300_data = {
|
|
.clk_reg = 0x60,
|
|
.flags = HIX5HD2_FLAG_EXTRA_ENABLE,
|
|
};
|
|
|
|
struct hix5hd2_ir_priv {
|
|
int irq;
|
|
void __iomem *base;
|
|
struct device *dev;
|
|
struct rc_dev *rdev;
|
|
struct regmap *regmap;
|
|
struct clk *clock;
|
|
unsigned long rate;
|
|
const struct hix5hd2_soc_data *socdata;
|
|
};
|
|
|
|
static int hix5hd2_ir_clk_enable(struct hix5hd2_ir_priv *dev, bool on)
|
|
{
|
|
u32 clk_reg = dev->socdata->clk_reg;
|
|
u32 val;
|
|
int ret = 0;
|
|
|
|
if (dev->regmap) {
|
|
regmap_read(dev->regmap, clk_reg, &val);
|
|
if (on) {
|
|
val &= ~IR_CLK_RESET;
|
|
val |= IR_CLK_ENABLE;
|
|
} else {
|
|
val &= ~IR_CLK_ENABLE;
|
|
val |= IR_CLK_RESET;
|
|
}
|
|
regmap_write(dev->regmap, clk_reg, val);
|
|
} else {
|
|
if (on)
|
|
ret = clk_prepare_enable(dev->clock);
|
|
else
|
|
clk_disable_unprepare(dev->clock);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static inline void hix5hd2_ir_enable(struct hix5hd2_ir_priv *priv)
|
|
{
|
|
u32 val = IR_ENABLE_EN;
|
|
|
|
if (priv->socdata->flags & HIX5HD2_FLAG_EXTRA_ENABLE)
|
|
val |= IR_ENABLE_EN_EXTRA;
|
|
|
|
writel_relaxed(val, priv->base + IR_ENABLE);
|
|
}
|
|
|
|
static int hix5hd2_ir_config(struct hix5hd2_ir_priv *priv)
|
|
{
|
|
int timeout = 10000;
|
|
u32 val, rate;
|
|
|
|
hix5hd2_ir_enable(priv);
|
|
|
|
while (readl_relaxed(priv->base + IR_BUSY)) {
|
|
if (timeout--) {
|
|
udelay(1);
|
|
} else {
|
|
dev_err(priv->dev, "IR_BUSY timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
/* Now only support raw mode, with symbol start from low to high */
|
|
rate = DIV_ROUND_CLOSEST(priv->rate, 1000000);
|
|
val = IR_CFG_SYMBOL_MAXWIDTH & IR_CFG_WIDTH_MASK << IR_CFG_WIDTH_SHIFT;
|
|
val |= IR_CFG_SYMBOL_FMT & IR_CFG_FORMAT_MASK << IR_CFG_FORMAT_SHIFT;
|
|
val |= (IR_CFG_INT_THRESHOLD - 1) & IR_CFG_INT_LEVEL_MASK
|
|
<< IR_CFG_INT_LEVEL_SHIFT;
|
|
val |= IR_CFG_MODE_RAW;
|
|
val |= (rate - 1) & IR_CFG_FREQ_MASK << IR_CFG_FREQ_SHIFT;
|
|
writel_relaxed(val, priv->base + IR_CONFIG);
|
|
|
|
writel_relaxed(0x00, priv->base + IR_INTM);
|
|
/* write arbitrary value to start */
|
|
writel_relaxed(0x01, priv->base + IR_START);
|
|
return 0;
|
|
}
|
|
|
|
static int hix5hd2_ir_open(struct rc_dev *rdev)
|
|
{
|
|
struct hix5hd2_ir_priv *priv = rdev->priv;
|
|
int ret;
|
|
|
|
ret = hix5hd2_ir_clk_enable(priv, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = hix5hd2_ir_config(priv);
|
|
if (ret) {
|
|
hix5hd2_ir_clk_enable(priv, false);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void hix5hd2_ir_close(struct rc_dev *rdev)
|
|
{
|
|
struct hix5hd2_ir_priv *priv = rdev->priv;
|
|
|
|
hix5hd2_ir_clk_enable(priv, false);
|
|
}
|
|
|
|
static irqreturn_t hix5hd2_ir_rx_interrupt(int irq, void *data)
|
|
{
|
|
u32 symb_num, symb_val, symb_time;
|
|
u32 data_l, data_h;
|
|
u32 irq_sr, i;
|
|
struct hix5hd2_ir_priv *priv = data;
|
|
|
|
irq_sr = readl_relaxed(priv->base + IR_INTS);
|
|
if (irq_sr & INTMS_OVERFLOW) {
|
|
/*
|
|
* we must read IR_DATAL first, then we can clean up
|
|
* IR_INTS availably since logic would not clear
|
|
* fifo when overflow, drv do the job
|
|
*/
|
|
ir_raw_event_reset(priv->rdev);
|
|
symb_num = readl_relaxed(priv->base + IR_DATAH);
|
|
for (i = 0; i < symb_num; i++)
|
|
readl_relaxed(priv->base + IR_DATAL);
|
|
|
|
writel_relaxed(INT_CLR_OVERFLOW, priv->base + IR_INTC);
|
|
dev_info(priv->dev, "overflow, level=%d\n",
|
|
IR_CFG_INT_THRESHOLD);
|
|
}
|
|
|
|
if ((irq_sr & INTMS_SYMBRCV) || (irq_sr & INTMS_TIMEOUT)) {
|
|
struct ir_raw_event ev = {};
|
|
|
|
symb_num = readl_relaxed(priv->base + IR_DATAH);
|
|
for (i = 0; i < symb_num; i++) {
|
|
symb_val = readl_relaxed(priv->base + IR_DATAL);
|
|
data_l = ((symb_val & 0xffff) * 10);
|
|
data_h = ((symb_val >> 16) & 0xffff) * 10;
|
|
symb_time = (data_l + data_h) / 10;
|
|
|
|
ev.duration = data_l;
|
|
ev.pulse = true;
|
|
ir_raw_event_store(priv->rdev, &ev);
|
|
|
|
if (symb_time < IR_CFG_SYMBOL_MAXWIDTH) {
|
|
ev.duration = data_h;
|
|
ev.pulse = false;
|
|
ir_raw_event_store(priv->rdev, &ev);
|
|
} else {
|
|
ir_raw_event_set_idle(priv->rdev, true);
|
|
}
|
|
}
|
|
|
|
if (irq_sr & INTMS_SYMBRCV)
|
|
writel_relaxed(INT_CLR_RCV, priv->base + IR_INTC);
|
|
if (irq_sr & INTMS_TIMEOUT)
|
|
writel_relaxed(INT_CLR_TIMEOUT, priv->base + IR_INTC);
|
|
}
|
|
|
|
/* Empty software fifo */
|
|
ir_raw_event_handle(priv->rdev);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static const struct of_device_id hix5hd2_ir_table[] = {
|
|
{ .compatible = "hisilicon,hix5hd2-ir", &hix5hd2_data, },
|
|
{ .compatible = "hisilicon,hi3796cv300-ir", &hi3796cv300_data, },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, hix5hd2_ir_table);
|
|
|
|
static int hix5hd2_ir_probe(struct platform_device *pdev)
|
|
{
|
|
struct rc_dev *rdev;
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *res;
|
|
struct hix5hd2_ir_priv *priv;
|
|
struct device_node *node = pdev->dev.of_node;
|
|
const struct of_device_id *of_id;
|
|
const char *map_name;
|
|
int ret;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
of_id = of_match_device(hix5hd2_ir_table, dev);
|
|
if (!of_id) {
|
|
dev_err(dev, "Unable to initialize IR data\n");
|
|
return -ENODEV;
|
|
}
|
|
priv->socdata = of_id->data;
|
|
|
|
priv->regmap = syscon_regmap_lookup_by_phandle(node,
|
|
"hisilicon,power-syscon");
|
|
if (IS_ERR(priv->regmap)) {
|
|
dev_info(dev, "no power-reg\n");
|
|
priv->regmap = NULL;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
priv->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(priv->base))
|
|
return PTR_ERR(priv->base);
|
|
|
|
priv->irq = platform_get_irq(pdev, 0);
|
|
if (priv->irq < 0)
|
|
return priv->irq;
|
|
|
|
rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
|
|
if (!rdev)
|
|
return -ENOMEM;
|
|
|
|
priv->clock = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(priv->clock)) {
|
|
dev_err(dev, "clock not found\n");
|
|
ret = PTR_ERR(priv->clock);
|
|
goto err;
|
|
}
|
|
ret = clk_prepare_enable(priv->clock);
|
|
if (ret)
|
|
goto err;
|
|
priv->rate = clk_get_rate(priv->clock);
|
|
|
|
rdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
|
|
rdev->priv = priv;
|
|
rdev->open = hix5hd2_ir_open;
|
|
rdev->close = hix5hd2_ir_close;
|
|
rdev->driver_name = IR_HIX5HD2_NAME;
|
|
map_name = of_get_property(node, "linux,rc-map-name", NULL);
|
|
rdev->map_name = map_name ?: RC_MAP_EMPTY;
|
|
rdev->device_name = IR_HIX5HD2_NAME;
|
|
rdev->input_phys = IR_HIX5HD2_NAME "/input0";
|
|
rdev->input_id.bustype = BUS_HOST;
|
|
rdev->input_id.vendor = 0x0001;
|
|
rdev->input_id.product = 0x0001;
|
|
rdev->input_id.version = 0x0100;
|
|
rdev->rx_resolution = 10;
|
|
rdev->timeout = IR_CFG_SYMBOL_MAXWIDTH * 10;
|
|
|
|
ret = rc_register_device(rdev);
|
|
if (ret < 0)
|
|
goto clkerr;
|
|
|
|
if (devm_request_irq(dev, priv->irq, hix5hd2_ir_rx_interrupt,
|
|
0, pdev->name, priv) < 0) {
|
|
dev_err(dev, "IRQ %d register failed\n", priv->irq);
|
|
ret = -EINVAL;
|
|
goto regerr;
|
|
}
|
|
|
|
priv->rdev = rdev;
|
|
priv->dev = dev;
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
return ret;
|
|
|
|
regerr:
|
|
rc_unregister_device(rdev);
|
|
rdev = NULL;
|
|
clkerr:
|
|
clk_disable_unprepare(priv->clock);
|
|
err:
|
|
rc_free_device(rdev);
|
|
dev_err(dev, "Unable to register device (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int hix5hd2_ir_remove(struct platform_device *pdev)
|
|
{
|
|
struct hix5hd2_ir_priv *priv = platform_get_drvdata(pdev);
|
|
|
|
clk_disable_unprepare(priv->clock);
|
|
rc_unregister_device(priv->rdev);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int hix5hd2_ir_suspend(struct device *dev)
|
|
{
|
|
struct hix5hd2_ir_priv *priv = dev_get_drvdata(dev);
|
|
|
|
clk_disable_unprepare(priv->clock);
|
|
hix5hd2_ir_clk_enable(priv, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hix5hd2_ir_resume(struct device *dev)
|
|
{
|
|
struct hix5hd2_ir_priv *priv = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = hix5hd2_ir_clk_enable(priv, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(priv->clock);
|
|
if (ret) {
|
|
hix5hd2_ir_clk_enable(priv, false);
|
|
return ret;
|
|
}
|
|
|
|
hix5hd2_ir_enable(priv);
|
|
|
|
writel_relaxed(0x00, priv->base + IR_INTM);
|
|
writel_relaxed(0xff, priv->base + IR_INTC);
|
|
writel_relaxed(0x01, priv->base + IR_START);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(hix5hd2_ir_pm_ops, hix5hd2_ir_suspend,
|
|
hix5hd2_ir_resume);
|
|
|
|
static struct platform_driver hix5hd2_ir_driver = {
|
|
.driver = {
|
|
.name = IR_HIX5HD2_NAME,
|
|
.of_match_table = hix5hd2_ir_table,
|
|
.pm = &hix5hd2_ir_pm_ops,
|
|
},
|
|
.probe = hix5hd2_ir_probe,
|
|
.remove = hix5hd2_ir_remove,
|
|
};
|
|
|
|
module_platform_driver(hix5hd2_ir_driver);
|
|
|
|
MODULE_DESCRIPTION("IR controller driver for hix5hd2 platforms");
|
|
MODULE_AUTHOR("Guoxiong Yan <yanguoxiong@huawei.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:hix5hd2-ir");
|