mirror of
https://github.com/torvalds/linux.git
synced 2024-12-30 06:41:43 +00:00
528222d853
rc-core kapi uses nanoseconds for infrared durations for receiving, and microseconds for sending. The uapi already uses microseconds for both, so this patch does not change the uapi. Infrared durations do not need nanosecond resolution. IR protocols do not have durations shorter than about 100 microseconds. Some IR hardware offers 250 microseconds resolution, which is sufficient for most protocols. Better hardware has 50 microsecond resolution and is enough for every protocol I am aware off. Unify on microseconds everywhere. This simplifies the code since less conversion between microseconds and nanoseconds needs to be done. This affects: - rx_resolution member of struct rc_dev - timeout member of struct rc_dev - duration member in struct ir_raw_event Cc: "Bruno Prémont" <bonbons@linux-vserver.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Patrick Lerda <patrick9876@free.fr> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "David Härdeman" <david@hardeman.nu> Cc: Benjamin Valentin <benpicco@googlemail.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
572 lines
13 KiB
C
572 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* IguanaWorks USB IR Transceiver support
|
|
*
|
|
* Copyright (C) 2012 Sean Young <sean@mess.org>
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/input.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/completion.h>
|
|
#include <media/rc-core.h>
|
|
|
|
#define BUF_SIZE 152
|
|
|
|
struct iguanair {
|
|
struct rc_dev *rc;
|
|
|
|
struct device *dev;
|
|
struct usb_device *udev;
|
|
|
|
uint16_t version;
|
|
uint8_t bufsize;
|
|
uint8_t cycle_overhead;
|
|
|
|
/* receiver support */
|
|
bool receiver_on;
|
|
dma_addr_t dma_in, dma_out;
|
|
uint8_t *buf_in;
|
|
struct urb *urb_in, *urb_out;
|
|
struct completion completion;
|
|
|
|
/* transmit support */
|
|
bool tx_overflow;
|
|
uint32_t carrier;
|
|
struct send_packet *packet;
|
|
|
|
char name[64];
|
|
char phys[64];
|
|
};
|
|
|
|
#define CMD_NOP 0x00
|
|
#define CMD_GET_VERSION 0x01
|
|
#define CMD_GET_BUFSIZE 0x11
|
|
#define CMD_GET_FEATURES 0x10
|
|
#define CMD_SEND 0x15
|
|
#define CMD_EXECUTE 0x1f
|
|
#define CMD_RX_OVERFLOW 0x31
|
|
#define CMD_TX_OVERFLOW 0x32
|
|
#define CMD_RECEIVER_ON 0x12
|
|
#define CMD_RECEIVER_OFF 0x14
|
|
|
|
#define DIR_IN 0xdc
|
|
#define DIR_OUT 0xcd
|
|
|
|
#define MAX_IN_PACKET 8u
|
|
#define MAX_OUT_PACKET (sizeof(struct send_packet) + BUF_SIZE)
|
|
#define TIMEOUT 1000
|
|
#define RX_RESOLUTION 21
|
|
|
|
struct packet {
|
|
uint16_t start;
|
|
uint8_t direction;
|
|
uint8_t cmd;
|
|
};
|
|
|
|
struct send_packet {
|
|
struct packet header;
|
|
uint8_t length;
|
|
uint8_t channels;
|
|
uint8_t busy7;
|
|
uint8_t busy4;
|
|
uint8_t payload[];
|
|
};
|
|
|
|
static void process_ir_data(struct iguanair *ir, unsigned len)
|
|
{
|
|
if (len >= 4 && ir->buf_in[0] == 0 && ir->buf_in[1] == 0) {
|
|
switch (ir->buf_in[3]) {
|
|
case CMD_GET_VERSION:
|
|
if (len == 6) {
|
|
ir->version = (ir->buf_in[5] << 8) |
|
|
ir->buf_in[4];
|
|
complete(&ir->completion);
|
|
}
|
|
break;
|
|
case CMD_GET_BUFSIZE:
|
|
if (len >= 5) {
|
|
ir->bufsize = ir->buf_in[4];
|
|
complete(&ir->completion);
|
|
}
|
|
break;
|
|
case CMD_GET_FEATURES:
|
|
if (len > 5) {
|
|
ir->cycle_overhead = ir->buf_in[5];
|
|
complete(&ir->completion);
|
|
}
|
|
break;
|
|
case CMD_TX_OVERFLOW:
|
|
ir->tx_overflow = true;
|
|
fallthrough;
|
|
case CMD_RECEIVER_OFF:
|
|
case CMD_RECEIVER_ON:
|
|
case CMD_SEND:
|
|
complete(&ir->completion);
|
|
break;
|
|
case CMD_RX_OVERFLOW:
|
|
dev_warn(ir->dev, "receive overflow\n");
|
|
ir_raw_event_reset(ir->rc);
|
|
break;
|
|
default:
|
|
dev_warn(ir->dev, "control code %02x received\n",
|
|
ir->buf_in[3]);
|
|
break;
|
|
}
|
|
} else if (len >= 7) {
|
|
struct ir_raw_event rawir = {};
|
|
unsigned i;
|
|
bool event = false;
|
|
|
|
for (i = 0; i < 7; i++) {
|
|
if (ir->buf_in[i] == 0x80) {
|
|
rawir.pulse = false;
|
|
rawir.duration = 21845;
|
|
} else {
|
|
rawir.pulse = (ir->buf_in[i] & 0x80) == 0;
|
|
rawir.duration = ((ir->buf_in[i] & 0x7f) + 1) *
|
|
RX_RESOLUTION;
|
|
}
|
|
|
|
if (ir_raw_event_store_with_filter(ir->rc, &rawir))
|
|
event = true;
|
|
}
|
|
|
|
if (event)
|
|
ir_raw_event_handle(ir->rc);
|
|
}
|
|
}
|
|
|
|
static void iguanair_rx(struct urb *urb)
|
|
{
|
|
struct iguanair *ir;
|
|
int rc;
|
|
|
|
if (!urb)
|
|
return;
|
|
|
|
ir = urb->context;
|
|
if (!ir) {
|
|
usb_unlink_urb(urb);
|
|
return;
|
|
}
|
|
|
|
switch (urb->status) {
|
|
case 0:
|
|
process_ir_data(ir, urb->actual_length);
|
|
break;
|
|
case -ECONNRESET:
|
|
case -ENOENT:
|
|
case -ESHUTDOWN:
|
|
usb_unlink_urb(urb);
|
|
return;
|
|
case -EPIPE:
|
|
default:
|
|
dev_dbg(ir->dev, "Error: urb status = %d\n", urb->status);
|
|
break;
|
|
}
|
|
|
|
rc = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (rc && rc != -ENODEV)
|
|
dev_warn(ir->dev, "failed to resubmit urb: %d\n", rc);
|
|
}
|
|
|
|
static void iguanair_irq_out(struct urb *urb)
|
|
{
|
|
struct iguanair *ir = urb->context;
|
|
|
|
if (urb->status)
|
|
dev_dbg(ir->dev, "Error: out urb status = %d\n", urb->status);
|
|
|
|
/* if we sent an nop packet, do not expect a response */
|
|
if (urb->status == 0 && ir->packet->header.cmd == CMD_NOP)
|
|
complete(&ir->completion);
|
|
}
|
|
|
|
static int iguanair_send(struct iguanair *ir, unsigned size)
|
|
{
|
|
int rc;
|
|
|
|
reinit_completion(&ir->completion);
|
|
|
|
ir->urb_out->transfer_buffer_length = size;
|
|
rc = usb_submit_urb(ir->urb_out, GFP_KERNEL);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (wait_for_completion_timeout(&ir->completion, TIMEOUT) == 0)
|
|
return -ETIMEDOUT;
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int iguanair_get_features(struct iguanair *ir)
|
|
{
|
|
int rc;
|
|
|
|
/*
|
|
* On cold boot, the iguanair initializes on the first packet
|
|
* received but does not process that packet. Send an empty
|
|
* packet.
|
|
*/
|
|
ir->packet->header.start = 0;
|
|
ir->packet->header.direction = DIR_OUT;
|
|
ir->packet->header.cmd = CMD_NOP;
|
|
iguanair_send(ir, sizeof(ir->packet->header));
|
|
|
|
ir->packet->header.cmd = CMD_GET_VERSION;
|
|
rc = iguanair_send(ir, sizeof(ir->packet->header));
|
|
if (rc) {
|
|
dev_info(ir->dev, "failed to get version\n");
|
|
goto out;
|
|
}
|
|
|
|
if (ir->version < 0x205) {
|
|
dev_err(ir->dev, "firmware 0x%04x is too old\n", ir->version);
|
|
rc = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
ir->bufsize = 150;
|
|
ir->cycle_overhead = 65;
|
|
|
|
ir->packet->header.cmd = CMD_GET_BUFSIZE;
|
|
|
|
rc = iguanair_send(ir, sizeof(ir->packet->header));
|
|
if (rc) {
|
|
dev_info(ir->dev, "failed to get buffer size\n");
|
|
goto out;
|
|
}
|
|
|
|
if (ir->bufsize > BUF_SIZE) {
|
|
dev_info(ir->dev, "buffer size %u larger than expected\n",
|
|
ir->bufsize);
|
|
ir->bufsize = BUF_SIZE;
|
|
}
|
|
|
|
ir->packet->header.cmd = CMD_GET_FEATURES;
|
|
|
|
rc = iguanair_send(ir, sizeof(ir->packet->header));
|
|
if (rc)
|
|
dev_info(ir->dev, "failed to get features\n");
|
|
out:
|
|
return rc;
|
|
}
|
|
|
|
static int iguanair_receiver(struct iguanair *ir, bool enable)
|
|
{
|
|
ir->packet->header.start = 0;
|
|
ir->packet->header.direction = DIR_OUT;
|
|
ir->packet->header.cmd = enable ? CMD_RECEIVER_ON : CMD_RECEIVER_OFF;
|
|
|
|
if (enable)
|
|
ir_raw_event_reset(ir->rc);
|
|
|
|
return iguanair_send(ir, sizeof(ir->packet->header));
|
|
}
|
|
|
|
/*
|
|
* The iguanair creates the carrier by busy spinning after each half period.
|
|
* This is counted in CPU cycles, with the CPU running at 24MHz. It is
|
|
* broken down into 7-cycles and 4-cyles delays, with a preference for
|
|
* 4-cycle delays, minus the overhead of the loop itself (cycle_overhead).
|
|
*/
|
|
static int iguanair_set_tx_carrier(struct rc_dev *dev, uint32_t carrier)
|
|
{
|
|
struct iguanair *ir = dev->priv;
|
|
|
|
if (carrier < 25000 || carrier > 150000)
|
|
return -EINVAL;
|
|
|
|
if (carrier != ir->carrier) {
|
|
uint32_t cycles, fours, sevens;
|
|
|
|
ir->carrier = carrier;
|
|
|
|
cycles = DIV_ROUND_CLOSEST(24000000, carrier * 2) -
|
|
ir->cycle_overhead;
|
|
|
|
/*
|
|
* Calculate minimum number of 7 cycles needed so
|
|
* we are left with a multiple of 4; so we want to have
|
|
* (sevens * 7) & 3 == cycles & 3
|
|
*/
|
|
sevens = (4 - cycles) & 3;
|
|
fours = (cycles - sevens * 7) / 4;
|
|
|
|
/*
|
|
* The firmware interprets these values as a relative offset
|
|
* for a branch. Immediately following the branches, there
|
|
* 4 instructions of 7 cycles (2 bytes each) and 110
|
|
* instructions of 4 cycles (1 byte each). A relative branch
|
|
* of 0 will execute all of them, branch further for less
|
|
* cycle burning.
|
|
*/
|
|
ir->packet->busy7 = (4 - sevens) * 2;
|
|
ir->packet->busy4 = 110 - fours;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int iguanair_set_tx_mask(struct rc_dev *dev, uint32_t mask)
|
|
{
|
|
struct iguanair *ir = dev->priv;
|
|
|
|
if (mask > 15)
|
|
return 4;
|
|
|
|
ir->packet->channels = mask << 4;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int iguanair_tx(struct rc_dev *dev, unsigned *txbuf, unsigned count)
|
|
{
|
|
struct iguanair *ir = dev->priv;
|
|
unsigned int i, size, p, periods;
|
|
int rc;
|
|
|
|
/* convert from us to carrier periods */
|
|
for (i = size = 0; i < count; i++) {
|
|
periods = DIV_ROUND_CLOSEST(txbuf[i] * ir->carrier, 1000000);
|
|
while (periods) {
|
|
p = min(periods, 127u);
|
|
if (size >= ir->bufsize) {
|
|
rc = -EINVAL;
|
|
goto out;
|
|
}
|
|
ir->packet->payload[size++] = p | ((i & 1) ? 0x80 : 0);
|
|
periods -= p;
|
|
}
|
|
}
|
|
|
|
ir->packet->header.start = 0;
|
|
ir->packet->header.direction = DIR_OUT;
|
|
ir->packet->header.cmd = CMD_SEND;
|
|
ir->packet->length = size;
|
|
|
|
ir->tx_overflow = false;
|
|
|
|
rc = iguanair_send(ir, sizeof(*ir->packet) + size);
|
|
|
|
if (rc == 0 && ir->tx_overflow)
|
|
rc = -EOVERFLOW;
|
|
|
|
out:
|
|
return rc ? rc : count;
|
|
}
|
|
|
|
static int iguanair_open(struct rc_dev *rdev)
|
|
{
|
|
struct iguanair *ir = rdev->priv;
|
|
int rc;
|
|
|
|
rc = iguanair_receiver(ir, true);
|
|
if (rc == 0)
|
|
ir->receiver_on = true;
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void iguanair_close(struct rc_dev *rdev)
|
|
{
|
|
struct iguanair *ir = rdev->priv;
|
|
int rc;
|
|
|
|
rc = iguanair_receiver(ir, false);
|
|
ir->receiver_on = false;
|
|
if (rc && rc != -ENODEV)
|
|
dev_warn(ir->dev, "failed to disable receiver: %d\n", rc);
|
|
}
|
|
|
|
static int iguanair_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct usb_device *udev = interface_to_usbdev(intf);
|
|
struct iguanair *ir;
|
|
struct rc_dev *rc;
|
|
int ret, pipein, pipeout;
|
|
struct usb_host_interface *idesc;
|
|
|
|
idesc = intf->cur_altsetting;
|
|
if (idesc->desc.bNumEndpoints < 2)
|
|
return -ENODEV;
|
|
|
|
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
|
|
rc = rc_allocate_device(RC_DRIVER_IR_RAW);
|
|
if (!ir || !rc) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
ir->buf_in = usb_alloc_coherent(udev, MAX_IN_PACKET, GFP_KERNEL,
|
|
&ir->dma_in);
|
|
ir->packet = usb_alloc_coherent(udev, MAX_OUT_PACKET, GFP_KERNEL,
|
|
&ir->dma_out);
|
|
ir->urb_in = usb_alloc_urb(0, GFP_KERNEL);
|
|
ir->urb_out = usb_alloc_urb(0, GFP_KERNEL);
|
|
|
|
if (!ir->buf_in || !ir->packet || !ir->urb_in || !ir->urb_out ||
|
|
!usb_endpoint_is_int_in(&idesc->endpoint[0].desc) ||
|
|
!usb_endpoint_is_int_out(&idesc->endpoint[1].desc)) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
ir->rc = rc;
|
|
ir->dev = &intf->dev;
|
|
ir->udev = udev;
|
|
|
|
init_completion(&ir->completion);
|
|
pipeout = usb_sndintpipe(udev,
|
|
idesc->endpoint[1].desc.bEndpointAddress);
|
|
usb_fill_int_urb(ir->urb_out, udev, pipeout, ir->packet, MAX_OUT_PACKET,
|
|
iguanair_irq_out, ir, 1);
|
|
ir->urb_out->transfer_dma = ir->dma_out;
|
|
ir->urb_out->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
|
|
|
|
pipein = usb_rcvintpipe(udev, idesc->endpoint[0].desc.bEndpointAddress);
|
|
usb_fill_int_urb(ir->urb_in, udev, pipein, ir->buf_in, MAX_IN_PACKET,
|
|
iguanair_rx, ir, 1);
|
|
ir->urb_in->transfer_dma = ir->dma_in;
|
|
ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
|
|
|
|
ret = usb_submit_urb(ir->urb_in, GFP_KERNEL);
|
|
if (ret) {
|
|
dev_warn(&intf->dev, "failed to submit urb: %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = iguanair_get_features(ir);
|
|
if (ret)
|
|
goto out2;
|
|
|
|
snprintf(ir->name, sizeof(ir->name),
|
|
"IguanaWorks USB IR Transceiver version 0x%04x", ir->version);
|
|
|
|
usb_make_path(ir->udev, ir->phys, sizeof(ir->phys));
|
|
|
|
rc->device_name = ir->name;
|
|
rc->input_phys = ir->phys;
|
|
usb_to_input_id(ir->udev, &rc->input_id);
|
|
rc->dev.parent = &intf->dev;
|
|
rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
|
|
rc->priv = ir;
|
|
rc->open = iguanair_open;
|
|
rc->close = iguanair_close;
|
|
rc->s_tx_mask = iguanair_set_tx_mask;
|
|
rc->s_tx_carrier = iguanair_set_tx_carrier;
|
|
rc->tx_ir = iguanair_tx;
|
|
rc->driver_name = KBUILD_MODNAME;
|
|
rc->map_name = RC_MAP_RC6_MCE;
|
|
rc->min_timeout = 1;
|
|
rc->timeout = IR_DEFAULT_TIMEOUT;
|
|
rc->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
|
|
rc->rx_resolution = RX_RESOLUTION;
|
|
|
|
iguanair_set_tx_carrier(rc, 38000);
|
|
iguanair_set_tx_mask(rc, 0);
|
|
|
|
ret = rc_register_device(rc);
|
|
if (ret < 0) {
|
|
dev_err(&intf->dev, "failed to register rc device %d", ret);
|
|
goto out2;
|
|
}
|
|
|
|
usb_set_intfdata(intf, ir);
|
|
|
|
return 0;
|
|
out2:
|
|
usb_kill_urb(ir->urb_in);
|
|
usb_kill_urb(ir->urb_out);
|
|
out:
|
|
if (ir) {
|
|
usb_free_urb(ir->urb_in);
|
|
usb_free_urb(ir->urb_out);
|
|
usb_free_coherent(udev, MAX_IN_PACKET, ir->buf_in, ir->dma_in);
|
|
usb_free_coherent(udev, MAX_OUT_PACKET, ir->packet,
|
|
ir->dma_out);
|
|
}
|
|
rc_free_device(rc);
|
|
kfree(ir);
|
|
return ret;
|
|
}
|
|
|
|
static void iguanair_disconnect(struct usb_interface *intf)
|
|
{
|
|
struct iguanair *ir = usb_get_intfdata(intf);
|
|
|
|
rc_unregister_device(ir->rc);
|
|
usb_set_intfdata(intf, NULL);
|
|
usb_kill_urb(ir->urb_in);
|
|
usb_kill_urb(ir->urb_out);
|
|
usb_free_urb(ir->urb_in);
|
|
usb_free_urb(ir->urb_out);
|
|
usb_free_coherent(ir->udev, MAX_IN_PACKET, ir->buf_in, ir->dma_in);
|
|
usb_free_coherent(ir->udev, MAX_OUT_PACKET, ir->packet, ir->dma_out);
|
|
kfree(ir);
|
|
}
|
|
|
|
static int iguanair_suspend(struct usb_interface *intf, pm_message_t message)
|
|
{
|
|
struct iguanair *ir = usb_get_intfdata(intf);
|
|
int rc = 0;
|
|
|
|
if (ir->receiver_on) {
|
|
rc = iguanair_receiver(ir, false);
|
|
if (rc)
|
|
dev_warn(ir->dev, "failed to disable receiver for suspend\n");
|
|
}
|
|
|
|
usb_kill_urb(ir->urb_in);
|
|
usb_kill_urb(ir->urb_out);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int iguanair_resume(struct usb_interface *intf)
|
|
{
|
|
struct iguanair *ir = usb_get_intfdata(intf);
|
|
int rc;
|
|
|
|
rc = usb_submit_urb(ir->urb_in, GFP_KERNEL);
|
|
if (rc)
|
|
dev_warn(&intf->dev, "failed to submit urb: %d\n", rc);
|
|
|
|
if (ir->receiver_on) {
|
|
rc = iguanair_receiver(ir, true);
|
|
if (rc)
|
|
dev_warn(ir->dev, "failed to enable receiver after resume\n");
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static const struct usb_device_id iguanair_table[] = {
|
|
{ USB_DEVICE(0x1781, 0x0938) },
|
|
{ }
|
|
};
|
|
|
|
static struct usb_driver iguanair_driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.probe = iguanair_probe,
|
|
.disconnect = iguanair_disconnect,
|
|
.suspend = iguanair_suspend,
|
|
.resume = iguanair_resume,
|
|
.reset_resume = iguanair_resume,
|
|
.id_table = iguanair_table,
|
|
.soft_unbind = 1 /* we want to disable receiver on unbind */
|
|
};
|
|
|
|
module_usb_driver(iguanair_driver);
|
|
|
|
MODULE_DESCRIPTION("IguanaWorks USB IR Transceiver");
|
|
MODULE_AUTHOR("Sean Young <sean@mess.org>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(usb, iguanair_table);
|
|
|