mirror of
https://github.com/torvalds/linux.git
synced 2024-12-07 03:21:32 +00:00
1f918e0fe4
The Battery Type Indicator (BTI) resistor is a resistor mounted between a special terminal on the battery and ground. By sending a fixed current (such as 7mA) through this resistor and measuring the voltage over it, the resistance can be determined, and this verifies the battery type. Typical side view of the battery: o o o GND BTI +3.8V Typical example of the electrical layout: +3.8 V BTI | | | + | _______ [ ] 7kOhm ___ | | | | | GND GND By verifying this resistance before attempting to charge the battery we add an additional level of security. In some systems this is used for plug-and-play of batteries with different capacity. In other cases, this is merely used to verify that the right type of battery is connected, if several batteries have the same physical shape and can be plugged into the same slot. Sometimes this is just a surplus security mechanism. Nokia and Samsung among many other vendors are known to use these BTI resistors. Add the BTI properties to struct power_supply_battery_info and switch the AB8500 charger code over to using it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
428 lines
13 KiB
C
428 lines
13 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
|
|
#ifndef _AB8500_CHARGER_H_
|
|
#define _AB8500_CHARGER_H_
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
/*
|
|
* System control 2 register offsets.
|
|
* bank = 0x02
|
|
*/
|
|
#define AB8500_MAIN_WDOG_CTRL_REG 0x01
|
|
#define AB8500_LOW_BAT_REG 0x03
|
|
#define AB8500_BATT_OK_REG 0x04
|
|
/*
|
|
* USB/ULPI register offsets
|
|
* Bank : 0x5
|
|
*/
|
|
#define AB8500_USB_LINE_STAT_REG 0x80
|
|
#define AB8500_USB_LINE_CTRL2_REG 0x82
|
|
#define AB8500_USB_LINK1_STAT_REG 0x94
|
|
|
|
/*
|
|
* Charger / status register offfsets
|
|
* Bank : 0x0B
|
|
*/
|
|
#define AB8500_CH_STATUS1_REG 0x00
|
|
#define AB8500_CH_STATUS2_REG 0x01
|
|
#define AB8500_CH_USBCH_STAT1_REG 0x02
|
|
#define AB8500_CH_USBCH_STAT2_REG 0x03
|
|
#define AB8540_CH_USBCH_STAT3_REG 0x04
|
|
#define AB8500_CH_STAT_REG 0x05
|
|
|
|
/*
|
|
* Charger / control register offfsets
|
|
* Bank : 0x0B
|
|
*/
|
|
#define AB8500_CH_VOLT_LVL_REG 0x40
|
|
#define AB8500_CH_VOLT_LVL_MAX_REG 0x41 /*Only in Cut2.0*/
|
|
#define AB8500_CH_OPT_CRNTLVL_REG 0x42
|
|
#define AB8500_CH_OPT_CRNTLVL_MAX_REG 0x43 /*Only in Cut2.0*/
|
|
#define AB8500_CH_WD_TIMER_REG 0x50
|
|
#define AB8500_CHARG_WD_CTRL 0x51
|
|
#define AB8500_BTEMP_HIGH_TH 0x52
|
|
#define AB8500_LED_INDICATOR_PWM_CTRL 0x53
|
|
#define AB8500_LED_INDICATOR_PWM_DUTY 0x54
|
|
#define AB8500_BATT_OVV 0x55
|
|
#define AB8500_CHARGER_CTRL 0x56
|
|
#define AB8500_BAT_CTRL_CURRENT_SOURCE 0x60 /*Only in Cut2.0*/
|
|
|
|
/*
|
|
* Charger / main control register offsets
|
|
* Bank : 0x0B
|
|
*/
|
|
#define AB8500_MCH_CTRL1 0x80
|
|
#define AB8500_MCH_CTRL2 0x81
|
|
#define AB8500_MCH_IPT_CURLVL_REG 0x82
|
|
#define AB8500_CH_WD_REG 0x83
|
|
|
|
/*
|
|
* Charger / USB control register offsets
|
|
* Bank : 0x0B
|
|
*/
|
|
#define AB8500_USBCH_CTRL1_REG 0xC0
|
|
#define AB8500_USBCH_CTRL2_REG 0xC1
|
|
#define AB8500_USBCH_IPT_CRNTLVL_REG 0xC2
|
|
#define AB8540_USB_PP_MODE_REG 0xC5
|
|
#define AB8540_USB_PP_CHR_REG 0xC6
|
|
|
|
/*
|
|
* Gas Gauge register offsets
|
|
* Bank : 0x0C
|
|
*/
|
|
#define AB8500_GASG_CC_CTRL_REG 0x00
|
|
#define AB8500_GASG_CC_ACCU1_REG 0x01
|
|
#define AB8500_GASG_CC_ACCU2_REG 0x02
|
|
#define AB8500_GASG_CC_ACCU3_REG 0x03
|
|
#define AB8500_GASG_CC_ACCU4_REG 0x04
|
|
#define AB8500_GASG_CC_SMPL_CNTRL_REG 0x05
|
|
#define AB8500_GASG_CC_SMPL_CNTRH_REG 0x06
|
|
#define AB8500_GASG_CC_SMPL_CNVL_REG 0x07
|
|
#define AB8500_GASG_CC_SMPL_CNVH_REG 0x08
|
|
#define AB8500_GASG_CC_CNTR_AVGOFF_REG 0x09
|
|
#define AB8500_GASG_CC_OFFSET_REG 0x0A
|
|
#define AB8500_GASG_CC_NCOV_ACCU 0x10
|
|
#define AB8500_GASG_CC_NCOV_ACCU_CTRL 0x11
|
|
#define AB8500_GASG_CC_NCOV_ACCU_LOW 0x12
|
|
#define AB8500_GASG_CC_NCOV_ACCU_MED 0x13
|
|
#define AB8500_GASG_CC_NCOV_ACCU_HIGH 0x14
|
|
|
|
/*
|
|
* Interrupt register offsets
|
|
* Bank : 0x0E
|
|
*/
|
|
#define AB8500_IT_SOURCE2_REG 0x01
|
|
#define AB8500_IT_SOURCE21_REG 0x14
|
|
|
|
/*
|
|
* RTC register offsets
|
|
* Bank: 0x0F
|
|
*/
|
|
#define AB8500_RTC_BACKUP_CHG_REG 0x0C
|
|
#define AB8500_RTC_CC_CONF_REG 0x01
|
|
#define AB8500_RTC_CTRL_REG 0x0B
|
|
#define AB8500_RTC_CTRL1_REG 0x11
|
|
|
|
/*
|
|
* OTP register offsets
|
|
* Bank : 0x15
|
|
*/
|
|
#define AB8500_OTP_CONF_15 0x0E
|
|
|
|
/* GPADC constants from AB8500 spec, UM0836 */
|
|
#define ADC_RESOLUTION 1024
|
|
#define ADC_CH_MAIN_MIN 0
|
|
#define ADC_CH_MAIN_MAX 20030
|
|
#define ADC_CH_VBUS_MIN 0
|
|
#define ADC_CH_VBUS_MAX 20030
|
|
#define ADC_CH_VBAT_MIN 2300
|
|
#define ADC_CH_VBAT_MAX 4800
|
|
#define ADC_CH_BKBAT_MIN 0
|
|
#define ADC_CH_BKBAT_MAX 3200
|
|
|
|
/* Main charge i/p current */
|
|
#define MAIN_CH_IP_CUR_0P9A 0x80
|
|
#define MAIN_CH_IP_CUR_1P0A 0x90
|
|
#define MAIN_CH_IP_CUR_1P1A 0xA0
|
|
#define MAIN_CH_IP_CUR_1P2A 0xB0
|
|
#define MAIN_CH_IP_CUR_1P3A 0xC0
|
|
#define MAIN_CH_IP_CUR_1P4A 0xD0
|
|
#define MAIN_CH_IP_CUR_1P5A 0xE0
|
|
|
|
/* ChVoltLevel */
|
|
#define CH_VOL_LVL_3P5 0x00
|
|
#define CH_VOL_LVL_4P0 0x14
|
|
#define CH_VOL_LVL_4P05 0x16
|
|
#define CH_VOL_LVL_4P1 0x1B
|
|
#define CH_VOL_LVL_4P15 0x20
|
|
#define CH_VOL_LVL_4P2 0x25
|
|
#define CH_VOL_LVL_4P6 0x4D
|
|
|
|
/* ChOutputCurrentLevel */
|
|
#define CH_OP_CUR_LVL_0P1 0x00
|
|
#define CH_OP_CUR_LVL_0P2 0x01
|
|
#define CH_OP_CUR_LVL_0P3 0x02
|
|
#define CH_OP_CUR_LVL_0P4 0x03
|
|
#define CH_OP_CUR_LVL_0P5 0x04
|
|
#define CH_OP_CUR_LVL_0P6 0x05
|
|
#define CH_OP_CUR_LVL_0P7 0x06
|
|
#define CH_OP_CUR_LVL_0P8 0x07
|
|
#define CH_OP_CUR_LVL_0P9 0x08
|
|
#define CH_OP_CUR_LVL_1P4 0x0D
|
|
#define CH_OP_CUR_LVL_1P5 0x0E
|
|
#define CH_OP_CUR_LVL_1P6 0x0F
|
|
#define CH_OP_CUR_LVL_2P 0x3F
|
|
|
|
/* BTEMP High thermal limits */
|
|
#define BTEMP_HIGH_TH_57_0 0x00
|
|
#define BTEMP_HIGH_TH_52 0x01
|
|
#define BTEMP_HIGH_TH_57_1 0x02
|
|
#define BTEMP_HIGH_TH_62 0x03
|
|
|
|
#define LOW_BAT_3P1V 0x20
|
|
#define LOW_BAT_2P3V 0x00
|
|
#define LOW_BAT_RESET 0x01
|
|
#define LOW_BAT_ENABLE 0x01
|
|
|
|
/* Backup battery constants */
|
|
#define BUP_ICH_SEL_50UA 0x00
|
|
#define BUP_ICH_SEL_150UA 0x04
|
|
#define BUP_ICH_SEL_300UA 0x08
|
|
#define BUP_ICH_SEL_700UA 0x0C
|
|
|
|
enum bup_vch_sel {
|
|
BUP_VCH_SEL_2P5V,
|
|
BUP_VCH_SEL_2P6V,
|
|
BUP_VCH_SEL_2P8V,
|
|
BUP_VCH_SEL_3P1V,
|
|
/*
|
|
* Note that the following 5 values 2.7v, 2.9v, 3.0v, 3.2v, 3.3v
|
|
* are only available on ab8540. You can't choose these 5
|
|
* voltage on ab8500/ab8505/ab9540.
|
|
*/
|
|
BUP_VCH_SEL_2P7V,
|
|
BUP_VCH_SEL_2P9V,
|
|
BUP_VCH_SEL_3P0V,
|
|
BUP_VCH_SEL_3P2V,
|
|
BUP_VCH_SEL_3P3V,
|
|
};
|
|
|
|
#define BUP_VCH_RANGE 0x02
|
|
#define VBUP33_VRTCN 0x01
|
|
|
|
/* Battery OVV constants */
|
|
#define BATT_OVV_ENA 0x02
|
|
#define BATT_OVV_TH_3P7 0x00
|
|
#define BATT_OVV_TH_4P75 0x01
|
|
|
|
/* A value to indicate over voltage (microvolts) */
|
|
#define BATT_OVV_VALUE 4750000
|
|
|
|
/* VBUS OVV constants */
|
|
#define VBUS_OVV_SELECT_MASK 0x78
|
|
#define VBUS_OVV_SELECT_5P6V 0x00
|
|
#define VBUS_OVV_SELECT_5P7V 0x08
|
|
#define VBUS_OVV_SELECT_5P8V 0x10
|
|
#define VBUS_OVV_SELECT_5P9V 0x18
|
|
#define VBUS_OVV_SELECT_6P0V 0x20
|
|
#define VBUS_OVV_SELECT_6P1V 0x28
|
|
#define VBUS_OVV_SELECT_6P2V 0x30
|
|
#define VBUS_OVV_SELECT_6P3V 0x38
|
|
|
|
#define VBUS_AUTO_IN_CURR_LIM_ENA 0x04
|
|
|
|
/* Fuel Gauge constants */
|
|
#define RESET_ACCU 0x02
|
|
#define READ_REQ 0x01
|
|
#define CC_DEEP_SLEEP_ENA 0x02
|
|
#define CC_PWR_UP_ENA 0x01
|
|
#define CC_SAMPLES_40 0x28
|
|
#define RD_NCONV_ACCU_REQ 0x01
|
|
#define CC_CALIB 0x08
|
|
#define CC_INTAVGOFFSET_ENA 0x10
|
|
#define CC_MUXOFFSET 0x80
|
|
#define CC_INT_CAL_N_AVG_MASK 0x60
|
|
#define CC_INT_CAL_SAMPLES_16 0x40
|
|
#define CC_INT_CAL_SAMPLES_8 0x20
|
|
#define CC_INT_CAL_SAMPLES_4 0x00
|
|
|
|
/* RTC constants */
|
|
#define RTC_BUP_CH_ENA 0x10
|
|
|
|
/* BatCtrl Current Source Constants */
|
|
#define BAT_CTRL_7U_ENA 0x01
|
|
#define BAT_CTRL_20U_ENA 0x02
|
|
#define BAT_CTRL_18U_ENA 0x01
|
|
#define BAT_CTRL_16U_ENA 0x02
|
|
#define BAT_CTRL_CMP_ENA 0x04
|
|
#define FORCE_BAT_CTRL_CMP_HIGH 0x08
|
|
#define BAT_CTRL_PULL_UP_ENA 0x10
|
|
|
|
/* Battery type */
|
|
#define BATTERY_UNKNOWN 00
|
|
|
|
/* Registers for pcut feature in ab8505 and ab9540 */
|
|
#define AB8505_RTC_PCUT_CTL_STATUS_REG 0x12
|
|
#define AB8505_RTC_PCUT_TIME_REG 0x13
|
|
#define AB8505_RTC_PCUT_MAX_TIME_REG 0x14
|
|
#define AB8505_RTC_PCUT_FLAG_TIME_REG 0x15
|
|
#define AB8505_RTC_PCUT_RESTART_REG 0x16
|
|
#define AB8505_RTC_PCUT_DEBOUNCE_REG 0x17
|
|
|
|
/* USB Power Path constants for ab8540 */
|
|
#define BUS_VSYS_VOL_SELECT_MASK 0x06
|
|
#define BUS_VSYS_VOL_SELECT_3P6V 0x00
|
|
#define BUS_VSYS_VOL_SELECT_3P325V 0x02
|
|
#define BUS_VSYS_VOL_SELECT_3P9V 0x04
|
|
#define BUS_VSYS_VOL_SELECT_4P3V 0x06
|
|
#define BUS_POWER_PATH_MODE_ENA 0x01
|
|
#define BUS_PP_PRECHG_CURRENT_MASK 0x0E
|
|
#define BUS_POWER_PATH_PRECHG_ENA 0x01
|
|
|
|
/* Forward declaration */
|
|
struct ab8500_fg;
|
|
|
|
/**
|
|
* struct ab8500_fg_parameters - Fuel gauge algorithm parameters, in seconds
|
|
* if not specified
|
|
* @recovery_sleep_timer: Time between measurements while recovering
|
|
* @recovery_total_time: Total recovery time
|
|
* @init_timer: Measurement interval during startup
|
|
* @init_discard_time: Time we discard voltage measurement at startup
|
|
* @init_total_time: Total init time during startup
|
|
* @high_curr_time: Time current has to be high to go to recovery
|
|
* @accu_charging: FG accumulation time while charging
|
|
* @accu_high_curr_ua: FG accumulation time in high current mode
|
|
* @high_curr_threshold_ua: High current threshold, in uA
|
|
* @lowbat_threshold_uv: Low battery threshold, in uV
|
|
* @battok_falling_th_sel0 Threshold in mV for battOk signal sel0
|
|
* Resolution in 50 mV step.
|
|
* @battok_raising_th_sel1 Threshold in mV for battOk signal sel1
|
|
* Resolution in 50 mV step.
|
|
* @user_cap_limit Capacity reported from user must be within this
|
|
* limit to be considered as sane, in percentage
|
|
* points.
|
|
* @maint_thres This is the threshold where we stop reporting
|
|
* battery full while in maintenance, in per cent
|
|
* @pcut_enable: Enable power cut feature in ab8505
|
|
* @pcut_max_time: Max time threshold
|
|
* @pcut_flag_time: Flagtime threshold
|
|
* @pcut_max_restart: Max number of restarts
|
|
* @pcut_debounce_time: Sets battery debounce time
|
|
*/
|
|
struct ab8500_fg_parameters {
|
|
int recovery_sleep_timer;
|
|
int recovery_total_time;
|
|
int init_timer;
|
|
int init_discard_time;
|
|
int init_total_time;
|
|
int high_curr_time;
|
|
int accu_charging;
|
|
int accu_high_curr;
|
|
int high_curr_threshold_ua;
|
|
int lowbat_threshold_uv;
|
|
int battok_falling_th_sel0;
|
|
int battok_raising_th_sel1;
|
|
int user_cap_limit;
|
|
int maint_thres;
|
|
bool pcut_enable;
|
|
u8 pcut_max_time;
|
|
u8 pcut_flag_time;
|
|
u8 pcut_max_restart;
|
|
u8 pcut_debounce_time;
|
|
};
|
|
|
|
/**
|
|
* struct ab8500_charger_maximization - struct used by the board config.
|
|
* @use_maxi: Enable maximization for this battery type
|
|
* @maxi_chg_curr_ua: Maximum charger current allowed in microampere
|
|
* @maxi_wait_cycles: cycles to wait before setting charger current
|
|
* @charger_curr_step_ua: delta between two charger current settings (uA)
|
|
*/
|
|
struct ab8500_maxim_parameters {
|
|
bool ena_maxi;
|
|
int chg_curr_ua;
|
|
int wait_cycles;
|
|
int charger_curr_step_ua;
|
|
};
|
|
|
|
/**
|
|
* struct ab8500_bm_capacity_levels - ab8500 capacity level data
|
|
* @critical: critical capacity level in percent
|
|
* @low: low capacity level in percent
|
|
* @normal: normal capacity level in percent
|
|
* @high: high capacity level in percent
|
|
* @full: full capacity level in percent
|
|
*/
|
|
struct ab8500_bm_capacity_levels {
|
|
int critical;
|
|
int low;
|
|
int normal;
|
|
int high;
|
|
int full;
|
|
};
|
|
|
|
/**
|
|
* struct ab8500_bm_charger_parameters - Charger specific parameters
|
|
* @usb_volt_max_uv: maximum allowed USB charger voltage in uV
|
|
* @usb_curr_max_ua: maximum allowed USB charger current in uA
|
|
* @ac_volt_max_uv: maximum allowed AC charger voltage in uV
|
|
* @ac_curr_max_ua: maximum allowed AC charger current in uA
|
|
*/
|
|
struct ab8500_bm_charger_parameters {
|
|
int usb_volt_max_uv;
|
|
int usb_curr_max_ua;
|
|
int ac_volt_max_uv;
|
|
int ac_curr_max_ua;
|
|
};
|
|
|
|
/**
|
|
* struct ab8500_bm_data - ab8500 battery management data
|
|
* @bi battery info from device tree
|
|
* @temp_now present battery temperature
|
|
* @temp_interval_chg temperature measurement interval in s when charging
|
|
* @temp_interval_nochg temperature measurement interval in s when not charging
|
|
* @main_safety_tmr_h safety timer for main charger
|
|
* @usb_safety_tmr_h safety timer for usb charger
|
|
* @bkup_bat_v voltage which we charge the backup battery with
|
|
* @bkup_bat_i current which we charge the backup battery with
|
|
* @capacity_scaling indicates whether capacity scaling is to be used
|
|
* @chg_unknown_bat flag to enable charging of unknown batteries
|
|
* @enable_overshoot flag to enable VBAT overshoot control
|
|
* @auto_trig flag to enable auto adc trigger
|
|
* @fg_res resistance of FG resistor in 0.1mOhm
|
|
* @interval_charging charge alg cycle period time when charging (sec)
|
|
* @interval_not_charging charge alg cycle period time when not charging (sec)
|
|
* @temp_hysteresis temperature hysteresis
|
|
* @maxi maximization parameters
|
|
* @cap_levels capacity in percent for the different capacity levels
|
|
* @chg_params charger parameters
|
|
* @fg_params fuel gauge parameters
|
|
*/
|
|
struct ab8500_bm_data {
|
|
struct power_supply_battery_info *bi;
|
|
int temp_now;
|
|
int temp_interval_chg;
|
|
int temp_interval_nochg;
|
|
int main_safety_tmr_h;
|
|
int usb_safety_tmr_h;
|
|
int bkup_bat_v;
|
|
int bkup_bat_i;
|
|
bool capacity_scaling;
|
|
bool chg_unknown_bat;
|
|
bool enable_overshoot;
|
|
bool auto_trig;
|
|
int fg_res;
|
|
int interval_charging;
|
|
int interval_not_charging;
|
|
int temp_hysteresis;
|
|
const struct ab8500_maxim_parameters *maxi;
|
|
const struct ab8500_bm_capacity_levels *cap_levels;
|
|
const struct ab8500_bm_charger_parameters *chg_params;
|
|
const struct ab8500_fg_parameters *fg_params;
|
|
};
|
|
|
|
/* Forward declaration */
|
|
struct ab8500_fg;
|
|
|
|
extern struct ab8500_bm_data ab8500_bm_data;
|
|
|
|
void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA);
|
|
struct ab8500_fg *ab8500_fg_get(void);
|
|
int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev);
|
|
int ab8500_fg_inst_curr_start(struct ab8500_fg *di);
|
|
int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res);
|
|
int ab8500_fg_inst_curr_started(struct ab8500_fg *di);
|
|
int ab8500_fg_inst_curr_done(struct ab8500_fg *di);
|
|
int ab8500_bm_of_probe(struct power_supply *psy,
|
|
struct ab8500_bm_data *bm);
|
|
void ab8500_bm_of_remove(struct power_supply *psy,
|
|
struct ab8500_bm_data *bm);
|
|
|
|
extern struct platform_driver ab8500_fg_driver;
|
|
extern struct platform_driver ab8500_btemp_driver;
|
|
extern struct platform_driver ab8500_chargalg_driver;
|
|
|
|
#endif /* _AB8500_CHARGER_H_ */
|