Greg Kroah-Hartman 7b2d7faa09 Second set of new device support, features and minor fixes for IIO in the 5.6 cycle ... Just a small set this time. As we are very near the merge window, I've rolled a few fixes in here rather than adding noise just before release. A short delay here will do little harm. New device support * adis16480 - Add support for adis16490. After earlier rework this is simple ID plus chip info. Features * kxcjk1013 - mount matrix support. * lsm_6dsx - mount matrix support. Cleanups / minor or late breaking fixes * ad7124 - add support to ad-sigma-delta and use it in this driver to allow the the interrupt type to be IRQF_TRIGGER_LOW unlike most other devices using this framework. * adis - use delay structure now available in SPI to handle transfer delays - introduce a timeouts structure to allow support of new devices * ak8975 - drop platform data support. No one is using it and it adds complexity. - use device_get_match_data rather than open coding much the same thing. * dht11 - drop meaningless todo * at91-samad2_adc - switch to dma_request_chan * altas-sensor - add a helper function to compute number of channels. Needed for new device support that is under review. * bma400 - add a lower bound check on scale. * inv_mpu6050 - add support for temperature data in the fifos for all chips. - support an odd situation where a board supports only interrupt triggering on both edges. * st_lsm6dsx - check and handle potential error return. * st_sensors - fix some values for the LSM9DS0 which is ever so slightly different from other devices using the same whoami value. - switch over to generic functions from dt ones, avoiding need for separate ACPI support. * stm32-adc - switch to dma_request_chan - suppress an error print in deferred probe case. * stm32-dac - drop private data structure element for reset controller as only used in probe. - reflect more cleanly that the reset controller is optional whilst ensuring that if is specified any errors are caught. * stm32-dfsdm - switch to dma_request_chan - fix missing application of formatting to single conversions. - ensure the sampling rate is updated when the oversampling ratio is changed. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl4jXUMRHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0FogF3A//Zv8vsOT11FI2+ntE94yyHk+HE8HunPVf tAWQ8AJX587QxqUqfidt4unH7r/62ybIXQTA+Dp0A2KnnL3iZU/qpAUfosQpWPeo 60Xr59a7E/Igs6sO9fUHCqmF8wKdjdoiUduApA4mhp4k7JfVAoGwyQfE7JppZPR4 VqJwDS+JyzY2IJXi/GbdWmwa1rQ/dkeY/lhy7cBOVVV/tu2Pow3QD69qDxLr4jrK Ck1p2PmUMI0cBXnThQGcyn3vOX/1irY9QJdt7PlVMSEmBnE1P4/Htvd40tG9o39S giOTufGG+A5VDRMnPW3qW32ccgQ/YFuqpmf083YlfhYaZUtRVJjlMwJnY8AQko31 Qg9VW4M8XjQI1XivuIgJONk4vzXGSbVvynI2qXuFsS0YvnuLOH4OU/MjGbEIBZ6r xBIoAVLueVjNshFS9ShsoJA6iBLouXoCpVutrnXpiCGGSCnf+oo6X9hj//JcfZFi jgsrltH7ae3V3N//QziAQ5Dw00/HcImJW0eNpOVQ/p3hJc7ImzDPps4FBW439A/K ni7dFvFhSpDIkuLVwql+/eyoMJWNBcW+dTUy5OWUgPl/yDKIN5rNtCQwN07ZuJdG 6ieBdrvNO2Y58vql4jJXQqR0OagQ4o0Yu1CnyXLFvqK1G9a1pFKEXcKkJLEZYwf5 Kz0dAtQTUGQ= =/q/r -----END PGP SIGNATURE----- Merge tag 'iio-for-5.6b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of new device support, features and minor fixes for IIO in the 5.6 cycle Just a small set this time. As we are very near the merge window, I've rolled a few fixes in here rather than adding noise just before release. A short delay here will do little harm. New device support * adis16480 - Add support for adis16490. After earlier rework this is simple ID plus chip info. Features * kxcjk1013 - mount matrix support. * lsm_6dsx - mount matrix support. Cleanups / minor or late breaking fixes * ad7124 - add support to ad-sigma-delta and use it in this driver to allow the the interrupt type to be IRQF_TRIGGER_LOW unlike most other devices using this framework. * adis - use delay structure now available in SPI to handle transfer delays - introduce a timeouts structure to allow support of new devices * ak8975 - drop platform data support. No one is using it and it adds complexity. - use device_get_match_data rather than open coding much the same thing. * dht11 - drop meaningless todo * at91-samad2_adc - switch to dma_request_chan * altas-sensor - add a helper function to compute number of channels. Needed for new device support that is under review. * bma400 - add a lower bound check on scale. * inv_mpu6050 - add support for temperature data in the fifos for all chips. - support an odd situation where a board supports only interrupt triggering on both edges. * st_lsm6dsx - check and handle potential error return. * st_sensors - fix some values for the LSM9DS0 which is ever so slightly different from other devices using the same whoami value. - switch over to generic functions from dt ones, avoiding need for separate ACPI support. * stm32-adc - switch to dma_request_chan - suppress an error print in deferred probe case. * stm32-dac - drop private data structure element for reset controller as only used in probe. - reflect more cleanly that the reset controller is optional whilst ensuring that if is specified any errors are caught. * stm32-dfsdm - switch to dma_request_chan - fix missing application of formatting to single conversions. - ensure the sampling rate is updated when the oversampling ratio is changed. * tag 'iio-for-5.6b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (29 commits) iio: dac: stm32-dac: better handle reset controller failures iio: dac: stm32-dac: use reset controller only at probe time dt-bindings: iio: accel: kxcjk1013: Document mount-matrix property iio: accel: kxcjk1013: Support orientation matrix iio: imu: st_lsm6dsx: add mount matrix support iio: adc: stm32-adc: don't print an error on probe deferral dt-bindings: iio: adis16480: add compatible entry for ADIS16490 iio: imu: adis16480: Add support for ADIS16490 iio: accel: bma400: prevent setting accel scale too low iio: imu/mpu6050: support dual-edge IRQ iio: imu: inv_mpu6050: add fifo temperature data support iio: magnetometer: ak8975: Convert to use device_get_match_data() iio: magnetometer: ak8975: Get rid of platform data iio: adc: ad7124: Set IRQ type to falling iio: adc: ad-sigma-delta: Allow custom IRQ flags iio: imu: adis: use new `delay` structure for SPI transfer delays iio: adc: stm32-dfsdm: adapt sampling rate to oversampling ratio iio: adc: stm32-dfsdm: fix single conversion iio: st_sensors: Make use of device properties iio: st_sensors: Drop redundant parameter from st_sensors_of_name_probe() ...		2020-01-19 14:59:05 +01:00
..
bindings	Second set of new device support, features and minor fixes for IIO in the 5.6 cycle	2020-01-19 14:59:05 +01:00
booting-without-of.txt	docs: arm: convert docs to ReST and rename to *.rst	2019-07-15 09:20:24 -03:00
changesets.txt
dynamic-resolution-notes.txt
of_unittest.txt
overlay-notes.txt
usage-model.txt
writing-schema.rst	dt-bindings: Improve validation build error handling	2019-11-14 10:46:16 -06:00