mirror of
https://github.com/torvalds/linux.git
synced 2024-11-23 20:51:44 +00:00
16d4f5378d
After commitb8a1a4cd5a
("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then03c835f498
("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230526060955.1130253-1-u.kleine-koenig@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
396 lines
9.9 KiB
C
396 lines
9.9 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Driver for Skyworks Si521xx PCIe clock generator driver
|
|
*
|
|
* The following series can be supported:
|
|
* - Si52144 - 4x DIFF
|
|
* - Si52146 - 6x DIFF
|
|
* - Si52147 - 9x DIFF
|
|
* Currently tested:
|
|
* - Si52144
|
|
*
|
|
* Copyright (C) 2022 Marek Vasut <marex@denx.de>
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bitrev.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regmap.h>
|
|
|
|
/* OE1 and OE2 register */
|
|
#define SI521XX_REG_OE(n) (((n) & 0x1) + 1)
|
|
#define SI521XX_REG_ID 0x3
|
|
#define SI521XX_REG_ID_PROG GENMASK(7, 4)
|
|
#define SI521XX_REG_ID_VENDOR GENMASK(3, 0)
|
|
#define SI521XX_REG_BC 0x4
|
|
#define SI521XX_REG_DA 0x5
|
|
#define SI521XX_REG_DA_AMP_SEL BIT(7)
|
|
#define SI521XX_REG_DA_AMP_MASK GENMASK(6, 4)
|
|
#define SI521XX_REG_DA_AMP_MIN 300000
|
|
#define SI521XX_REG_DA_AMP_DEFAULT 800000
|
|
#define SI521XX_REG_DA_AMP_MAX 1000000
|
|
#define SI521XX_REG_DA_AMP_STEP 100000
|
|
#define SI521XX_REG_DA_AMP(UV) \
|
|
FIELD_PREP(SI521XX_REG_DA_AMP_MASK, \
|
|
((UV) - SI521XX_REG_DA_AMP_MIN) / SI521XX_REG_DA_AMP_STEP)
|
|
#define SI521XX_REG_DA_UNKNOWN BIT(3) /* Always set */
|
|
|
|
/* Count of populated OE bits in control register ref, 1 and 2 */
|
|
#define SI521XX_OE_MAP(cr1, cr2) (((cr2) << 8) | (cr1))
|
|
#define SI521XX_OE_MAP_GET_OE(oe, map) (((map) >> (((oe) - 1) * 8)) & 0xff)
|
|
|
|
#define SI521XX_DIFF_MULT 4
|
|
#define SI521XX_DIFF_DIV 1
|
|
|
|
/* Supported Skyworks Si521xx models. */
|
|
enum si521xx_model {
|
|
SI52144 = 0x44,
|
|
SI52146 = 0x46,
|
|
SI52147 = 0x47,
|
|
};
|
|
|
|
struct si521xx;
|
|
|
|
struct si_clk {
|
|
struct clk_hw hw;
|
|
struct si521xx *si;
|
|
u8 reg;
|
|
u8 bit;
|
|
};
|
|
|
|
struct si521xx {
|
|
struct i2c_client *client;
|
|
struct regmap *regmap;
|
|
struct si_clk clk_dif[9];
|
|
u16 chip_info;
|
|
u8 pll_amplitude;
|
|
};
|
|
|
|
/*
|
|
* Si521xx i2c regmap
|
|
*/
|
|
static const struct regmap_range si521xx_readable_ranges[] = {
|
|
regmap_reg_range(SI521XX_REG_OE(0), SI521XX_REG_DA),
|
|
};
|
|
|
|
static const struct regmap_access_table si521xx_readable_table = {
|
|
.yes_ranges = si521xx_readable_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(si521xx_readable_ranges),
|
|
};
|
|
|
|
static const struct regmap_range si521xx_writeable_ranges[] = {
|
|
regmap_reg_range(SI521XX_REG_OE(0), SI521XX_REG_OE(1)),
|
|
regmap_reg_range(SI521XX_REG_BC, SI521XX_REG_DA),
|
|
};
|
|
|
|
static const struct regmap_access_table si521xx_writeable_table = {
|
|
.yes_ranges = si521xx_writeable_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(si521xx_writeable_ranges),
|
|
};
|
|
|
|
static int si521xx_regmap_i2c_write(void *context, unsigned int reg,
|
|
unsigned int val)
|
|
{
|
|
struct i2c_client *i2c = context;
|
|
const u8 data[3] = { reg, 1, val };
|
|
const int count = ARRAY_SIZE(data);
|
|
int ret;
|
|
|
|
ret = i2c_master_send(i2c, data, count);
|
|
if (ret == count)
|
|
return 0;
|
|
else if (ret < 0)
|
|
return ret;
|
|
else
|
|
return -EIO;
|
|
}
|
|
|
|
static int si521xx_regmap_i2c_read(void *context, unsigned int reg,
|
|
unsigned int *val)
|
|
{
|
|
struct i2c_client *i2c = context;
|
|
struct i2c_msg xfer[2];
|
|
u8 txdata = reg;
|
|
u8 rxdata[2];
|
|
int ret;
|
|
|
|
xfer[0].addr = i2c->addr;
|
|
xfer[0].flags = 0;
|
|
xfer[0].len = 1;
|
|
xfer[0].buf = (void *)&txdata;
|
|
|
|
xfer[1].addr = i2c->addr;
|
|
xfer[1].flags = I2C_M_RD;
|
|
xfer[1].len = 2;
|
|
xfer[1].buf = (void *)rxdata;
|
|
|
|
ret = i2c_transfer(i2c->adapter, xfer, 2);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret != 2)
|
|
return -EIO;
|
|
|
|
/*
|
|
* Byte 0 is transfer length, which is always 1 due
|
|
* to BCP register programming to 1 in si521xx_probe(),
|
|
* ignore it and use data from Byte 1.
|
|
*/
|
|
*val = rxdata[1];
|
|
return 0;
|
|
}
|
|
|
|
static const struct regmap_config si521xx_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.cache_type = REGCACHE_NONE,
|
|
.max_register = SI521XX_REG_DA,
|
|
.rd_table = &si521xx_readable_table,
|
|
.wr_table = &si521xx_writeable_table,
|
|
.reg_write = si521xx_regmap_i2c_write,
|
|
.reg_read = si521xx_regmap_i2c_read,
|
|
};
|
|
|
|
static unsigned long si521xx_diff_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
unsigned long long rate;
|
|
|
|
rate = (unsigned long long)parent_rate * SI521XX_DIFF_MULT;
|
|
do_div(rate, SI521XX_DIFF_DIV);
|
|
return (unsigned long)rate;
|
|
}
|
|
|
|
static long si521xx_diff_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
unsigned long best_parent;
|
|
|
|
best_parent = (rate / SI521XX_DIFF_MULT) * SI521XX_DIFF_DIV;
|
|
*prate = clk_hw_round_rate(clk_hw_get_parent(hw), best_parent);
|
|
|
|
return (*prate / SI521XX_DIFF_DIV) * SI521XX_DIFF_MULT;
|
|
}
|
|
|
|
static int si521xx_diff_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
/*
|
|
* We must report success but we can do so unconditionally because
|
|
* si521xx_diff_round_rate returns values that ensure this call is a
|
|
* nop.
|
|
*/
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define to_si521xx_clk(_hw) container_of(_hw, struct si_clk, hw)
|
|
|
|
static int si521xx_diff_prepare(struct clk_hw *hw)
|
|
{
|
|
struct si_clk *si_clk = to_si521xx_clk(hw);
|
|
struct si521xx *si = si_clk->si;
|
|
|
|
regmap_set_bits(si->regmap, SI521XX_REG_OE(si_clk->reg), si_clk->bit);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void si521xx_diff_unprepare(struct clk_hw *hw)
|
|
{
|
|
struct si_clk *si_clk = to_si521xx_clk(hw);
|
|
struct si521xx *si = si_clk->si;
|
|
|
|
regmap_clear_bits(si->regmap, SI521XX_REG_OE(si_clk->reg), si_clk->bit);
|
|
}
|
|
|
|
static const struct clk_ops si521xx_diff_clk_ops = {
|
|
.round_rate = si521xx_diff_round_rate,
|
|
.set_rate = si521xx_diff_set_rate,
|
|
.recalc_rate = si521xx_diff_recalc_rate,
|
|
.prepare = si521xx_diff_prepare,
|
|
.unprepare = si521xx_diff_unprepare,
|
|
};
|
|
|
|
static int si521xx_get_common_config(struct si521xx *si)
|
|
{
|
|
struct i2c_client *client = si->client;
|
|
struct device_node *np = client->dev.of_node;
|
|
unsigned int amp;
|
|
int ret;
|
|
|
|
/* Set defaults */
|
|
si->pll_amplitude = SI521XX_REG_DA_AMP(SI521XX_REG_DA_AMP_DEFAULT);
|
|
|
|
/* Output clock amplitude */
|
|
ret = of_property_read_u32(np, "skyworks,out-amplitude-microvolt",
|
|
&);
|
|
if (!ret) {
|
|
if (amp < SI521XX_REG_DA_AMP_MIN || amp > SI521XX_REG_DA_AMP_MAX ||
|
|
amp % SI521XX_REG_DA_AMP_STEP) {
|
|
return dev_err_probe(&client->dev, -EINVAL,
|
|
"Invalid skyworks,out-amplitude-microvolt value\n");
|
|
}
|
|
si->pll_amplitude = SI521XX_REG_DA_AMP(amp);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void si521xx_update_config(struct si521xx *si)
|
|
{
|
|
/* If amplitude is non-default, update it. */
|
|
if (si->pll_amplitude == SI521XX_REG_DA_AMP(SI521XX_REG_DA_AMP_DEFAULT))
|
|
return;
|
|
|
|
regmap_update_bits(si->regmap, SI521XX_REG_DA,
|
|
SI521XX_REG_DA_AMP_MASK, si->pll_amplitude);
|
|
}
|
|
|
|
static void si521xx_diff_idx_to_reg_bit(const u16 chip_info, const int idx,
|
|
struct si_clk *clk)
|
|
{
|
|
unsigned long mask;
|
|
int oe, b, ctr = 0;
|
|
|
|
for (oe = 1; oe <= 2; oe++) {
|
|
mask = bitrev8(SI521XX_OE_MAP_GET_OE(oe, chip_info));
|
|
for_each_set_bit(b, &mask, 8) {
|
|
if (ctr++ != idx)
|
|
continue;
|
|
clk->reg = SI521XX_REG_OE(oe);
|
|
clk->bit = 7 - b;
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
static struct clk_hw *
|
|
si521xx_of_clk_get(struct of_phandle_args *clkspec, void *data)
|
|
{
|
|
struct si521xx *si = data;
|
|
unsigned int idx = clkspec->args[0];
|
|
|
|
return &si->clk_dif[idx].hw;
|
|
}
|
|
|
|
static int si521xx_probe(struct i2c_client *client)
|
|
{
|
|
const u16 chip_info = (u16)(uintptr_t)device_get_match_data(&client->dev);
|
|
const struct clk_parent_data clk_parent_data = { .index = 0 };
|
|
struct si521xx *si;
|
|
unsigned char name[6] = "DIFF0";
|
|
struct clk_init_data init = {};
|
|
int i, ret;
|
|
|
|
if (!chip_info)
|
|
return -EINVAL;
|
|
|
|
si = devm_kzalloc(&client->dev, sizeof(*si), GFP_KERNEL);
|
|
if (!si)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(client, si);
|
|
si->client = client;
|
|
|
|
/* Fetch common configuration from DT (if specified) */
|
|
ret = si521xx_get_common_config(si);
|
|
if (ret)
|
|
return ret;
|
|
|
|
si->regmap = devm_regmap_init(&client->dev, NULL, client,
|
|
&si521xx_regmap_config);
|
|
if (IS_ERR(si->regmap))
|
|
return dev_err_probe(&client->dev, PTR_ERR(si->regmap),
|
|
"Failed to allocate register map\n");
|
|
|
|
/* Always read back 1 Byte via I2C */
|
|
ret = regmap_write(si->regmap, SI521XX_REG_BC, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Register clock */
|
|
for (i = 0; i < hweight16(chip_info); i++) {
|
|
memset(&init, 0, sizeof(init));
|
|
snprintf(name, 6, "DIFF%d", i);
|
|
init.name = name;
|
|
init.ops = &si521xx_diff_clk_ops;
|
|
init.parent_data = &clk_parent_data;
|
|
init.num_parents = 1;
|
|
init.flags = CLK_SET_RATE_PARENT;
|
|
|
|
si->clk_dif[i].hw.init = &init;
|
|
si->clk_dif[i].si = si;
|
|
|
|
si521xx_diff_idx_to_reg_bit(chip_info, i, &si->clk_dif[i]);
|
|
|
|
ret = devm_clk_hw_register(&client->dev, &si->clk_dif[i].hw);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_of_clk_add_hw_provider(&client->dev, si521xx_of_clk_get, si);
|
|
if (!ret)
|
|
si521xx_update_config(si);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __maybe_unused si521xx_suspend(struct device *dev)
|
|
{
|
|
struct si521xx *si = dev_get_drvdata(dev);
|
|
|
|
regcache_cache_only(si->regmap, true);
|
|
regcache_mark_dirty(si->regmap);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused si521xx_resume(struct device *dev)
|
|
{
|
|
struct si521xx *si = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
regcache_cache_only(si->regmap, false);
|
|
ret = regcache_sync(si->regmap);
|
|
if (ret)
|
|
dev_err(dev, "Failed to restore register map: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static const struct i2c_device_id si521xx_id[] = {
|
|
{ "si52144", .driver_data = SI521XX_OE_MAP(0x5, 0xc0) },
|
|
{ "si52146", .driver_data = SI521XX_OE_MAP(0x15, 0xe0) },
|
|
{ "si52147", .driver_data = SI521XX_OE_MAP(0x17, 0xf8) },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, si521xx_id);
|
|
|
|
static const struct of_device_id clk_si521xx_of_match[] = {
|
|
{ .compatible = "skyworks,si52144", .data = (void *)SI521XX_OE_MAP(0x5, 0xc0) },
|
|
{ .compatible = "skyworks,si52146", .data = (void *)SI521XX_OE_MAP(0x15, 0xe0) },
|
|
{ .compatible = "skyworks,si52147", .data = (void *)SI521XX_OE_MAP(0x15, 0xf8) },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, clk_si521xx_of_match);
|
|
|
|
static SIMPLE_DEV_PM_OPS(si521xx_pm_ops, si521xx_suspend, si521xx_resume);
|
|
|
|
static struct i2c_driver si521xx_driver = {
|
|
.driver = {
|
|
.name = "clk-si521xx",
|
|
.pm = &si521xx_pm_ops,
|
|
.of_match_table = clk_si521xx_of_match,
|
|
},
|
|
.probe = si521xx_probe,
|
|
.id_table = si521xx_id,
|
|
};
|
|
module_i2c_driver(si521xx_driver);
|
|
|
|
MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
|
|
MODULE_DESCRIPTION("Skyworks Si521xx PCIe clock generator driver");
|
|
MODULE_LICENSE("GPL");
|