Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-01 09:41:44 +00:00
Code Issues Packages Projects Releases Wiki Activity
7a781afde6
linux/arch/arm/plat-omap/include/mach/mux.h
Arun KS 2619bc3274 ARM: OMAP3: Pin multiplexing updates for 24xx and 34xx 
This patch adds some new pin multiplexing options
for McBSP and McSPI from Arun KS. Also add two more
GPIOs from David Brownell.

Also mark omap24xx_cfg_reg() static.

Signed-off-by: Arun KS <arunks@mistralsolutions.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10 17:36:54 -08:00

815 lines
17 KiB
C
Raw Blame History

/*
* arch/arm/plat-omap/include/mach/mux.h
*
* Table of the Omap register configurations for the FUNC_MUX and
* PULL_DWN combinations.
*
* Copyright (C) 2004 - 2008 Texas Instruments Inc.
* Copyright (C) 2003 - 2008 Nokia Corporation
*
* Written by Tony Lindgren
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* NOTE: Please use the following naming style for new pin entries.
* For example, W8_1610_MMC2_DAT0, where:
* - W8 = ball
* - 1610 = 1510 or 1610, none if common for both 1510 and 1610
* - MMC2_DAT0 = function
*/
#ifndef __ASM_ARCH_MUX_H
#define __ASM_ARCH_MUX_H
#define PU_PD_SEL_NA 0 /* No pu_pd reg available */
#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */
#ifdef CONFIG_OMAP_MUX_DEBUG
#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
.mux_reg = FUNC_MUX_CTRL_##reg, \
.mask_offset = mode_offset, \
.mask = mode,
#define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \
.pull_reg = PULL_DWN_CTRL_##reg, \
.pull_bit = bit, \
.pull_val = status,
#define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \
.pu_pd_reg = PU_PD_SEL_##reg, \
.pu_pd_val = status,
#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
.mux_reg = OMAP730_IO_CONF_##reg, \
.mask_offset = mode_offset, \
.mask = mode,
#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP730_IO_CONF_"#reg, \
.pull_reg = OMAP730_IO_CONF_##reg, \
.pull_bit = bit, \
.pull_val = status,
#else
#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
.mask_offset = mode_offset, \
.mask = mode,
#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \
.pull_bit = bit, \
.pull_val = status,
#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \
.pu_pd_val = status,
#define MUX_REG_730(reg, mode_offset, mode) \
.mux_reg = OMAP730_IO_CONF_##reg, \
.mask_offset = mode_offset, \
.mask = mode,
#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, \
.pull_bit = bit, \
.pull_val = status,
#endif /* CONFIG_OMAP_MUX_DEBUG */
#define MUX_CFG(desc, mux_reg, mode_offset, mode, \
pull_reg, pull_bit, pull_status, \
pu_pd_reg, pu_pd_status, debug_status) \
{ \
.name = desc, \
.debug = debug_status, \
MUX_REG(mux_reg, mode_offset, mode) \
PULL_REG(pull_reg, pull_bit, pull_status) \
PU_PD_REG(pu_pd_reg, pu_pd_status) \
},
/*
* OMAP730 has a slightly different config for the pin mux.
* - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
* not the FUNC_MUX_CTRL_x regs from hardware.h
* - for pull-up/down, only has one enable bit which is is in the same register
* as mux config
*/
#define MUX_CFG_730(desc, mux_reg, mode_offset, mode, \
pull_bit, pull_status, debug_status)\
{ \
.name = desc, \
.debug = debug_status, \
MUX_REG_730(mux_reg, mode_offset, mode) \
PULL_REG_730(mux_reg, pull_bit, pull_status) \
PU_PD_REG(NA, 0) \
},
#define MUX_CFG_24XX(desc, reg_offset, mode, \
pull_en, pull_mode, dbg) \
{ \
.name = desc, \
.debug = dbg, \
.mux_reg = reg_offset, \
.mask = mode, \
.pull_val = pull_en, \
.pu_pd_val = pull_mode, \
},
/* 24xx/34xx mux bit defines */
#define OMAP2_PULL_ENA (1 << 3)
#define OMAP2_PULL_UP (1 << 4)
#define OMAP2_ALTELECTRICALSEL (1 << 5)
/* 34xx specific mux bit defines */
#define OMAP3_INPUT_EN (1 << 8)
#define OMAP3_OFF_EN (1 << 9)
#define OMAP3_OFFOUT_EN (1 << 10)
#define OMAP3_OFFOUT_VAL (1 << 11)
#define OMAP3_OFF_PULL_EN (1 << 12)
#define OMAP3_OFF_PULL_UP (1 << 13)
#define OMAP3_WAKEUP_EN (1 << 14)
/* 34xx mux mode options for each pin. See TRM for options */
#define OMAP34XX_MUX_MODE0 0
#define OMAP34XX_MUX_MODE1 1
#define OMAP34XX_MUX_MODE2 2
#define OMAP34XX_MUX_MODE3 3
#define OMAP34XX_MUX_MODE4 4
#define OMAP34XX_MUX_MODE5 5
#define OMAP34XX_MUX_MODE6 6
#define OMAP34XX_MUX_MODE7 7
/* 34xx active pin states */
#define OMAP34XX_PIN_OUTPUT 0
#define OMAP34XX_PIN_INPUT OMAP3_INPUT_EN
#define OMAP34XX_PIN_INPUT_PULLUP (OMAP2_PULL_ENA | OMAP3_INPUT_EN \
| OMAP2_PULL_UP)
#define OMAP34XX_PIN_INPUT_PULLDOWN (OMAP2_PULL_ENA | OMAP3_INPUT_EN)
/* 34xx off mode states */
#define OMAP34XX_PIN_OFF_NONE 0
#define OMAP34XX_PIN_OFF_OUTPUT_HIGH (OMAP3_OFF_EN | OMAP3_OFFOUT_EN \
| OMAP3_OFFOUT_VAL)
#define OMAP34XX_PIN_OFF_OUTPUT_LOW (OMAP3_OFF_EN | OMAP3_OFFOUT_EN)
#define OMAP34XX_PIN_OFF_INPUT_PULLUP (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \
| OMAP3_OFF_PULL_UP)
#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN)
#define OMAP34XX_PIN_OFF_WAKEUPENABLE OMAP3_WAKEUP_EN
#define MUX_CFG_34XX(desc, reg_offset, mux_value) { \
.name = desc, \
.debug = 0, \
.mux_reg = reg_offset, \
.mux_val = mux_value \
},
struct pin_config {
char *name;
const unsigned int mux_reg;
unsigned char debug;
#if defined(CONFIG_ARCH_OMAP34XX)
u16 mux_val; /* Wake-up, off mode, pull, mux mode */
#endif
#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
const unsigned char mask_offset;
const unsigned char mask;
const char *pull_name;
const unsigned int pull_reg;
const unsigned char pull_val;
const unsigned char pull_bit;
const char *pu_pd_name;
const unsigned int pu_pd_reg;
const unsigned char pu_pd_val;
#endif
#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
const char *mux_reg_name;
#endif
};
enum omap730_index {
/* OMAP 730 keyboard */
E2_730_KBR0,
J7_730_KBR1,
E1_730_KBR2,
F3_730_KBR3,
D2_730_KBR4,
C2_730_KBC0,
D3_730_KBC1,
E4_730_KBC2,
F4_730_KBC3,
E3_730_KBC4,
/* USB */
AA17_730_USB_DM,
W16_730_USB_PU_EN,
W17_730_USB_VBUSI,
};
enum omap1xxx_index {
/* UART1 (BT_UART_GATING)*/
UART1_TX = 0,
UART1_RTS,
/* UART2 (COM_UART_GATING)*/
UART2_TX,
UART2_RX,
UART2_CTS,
UART2_RTS,
/* UART3 (GIGA_UART_GATING) */
UART3_TX,
UART3_RX,
UART3_CTS,
UART3_RTS,
UART3_CLKREQ,
UART3_BCLK, /* 12MHz clock out */
Y15_1610_UART3_RTS,
/* PWT & PWL */
PWT,
PWL,
/* USB master generic */
R18_USB_VBUS,
R18_1510_USB_GPIO0,
W4_USB_PUEN,
W4_USB_CLKO,
W4_USB_HIGHZ,
W4_GPIO58,
/* USB1 master */
USB1_SUSP,
USB1_SEO,
W13_1610_USB1_SE0,
USB1_TXEN,
USB1_TXD,
USB1_VP,
USB1_VM,
USB1_RCV,
USB1_SPEED,
R13_1610_USB1_SPEED,
R13_1710_USB1_SE0,
/* USB2 master */
USB2_SUSP,
USB2_VP,
USB2_TXEN,
USB2_VM,
USB2_RCV,
USB2_SEO,
USB2_TXD,
/* OMAP-1510 GPIO */
R18_1510_GPIO0,
R19_1510_GPIO1,
M14_1510_GPIO2,
/* OMAP1610 GPIO */
P18_1610_GPIO3,
Y15_1610_GPIO17,
/* OMAP-1710 GPIO */
R18_1710_GPIO0,
V2_1710_GPIO10,
N21_1710_GPIO14,
W15_1710_GPIO40,
/* MPUIO */
MPUIO2,
N15_1610_MPUIO2,
MPUIO4,
MPUIO5,
T20_1610_MPUIO5,
W11_1610_MPUIO6,
V10_1610_MPUIO7,
W11_1610_MPUIO9,
V10_1610_MPUIO10,
W10_1610_MPUIO11,
E20_1610_MPUIO13,
U20_1610_MPUIO14,
E19_1610_MPUIO15,
/* MCBSP2 */
MCBSP2_CLKR,
MCBSP2_CLKX,
MCBSP2_DR,
MCBSP2_DX,
MCBSP2_FSR,
MCBSP2_FSX,
/* MCBSP3 */
MCBSP3_CLKX,
/* Misc ballouts */
BALLOUT_V8_ARMIO3,
N20_HDQ,
/* OMAP-1610 MMC2 */
W8_1610_MMC2_DAT0,
V8_1610_MMC2_DAT1,
W15_1610_MMC2_DAT2,
R10_1610_MMC2_DAT3,
Y10_1610_MMC2_CLK,
Y8_1610_MMC2_CMD,
V9_1610_MMC2_CMDDIR,
V5_1610_MMC2_DATDIR0,
W19_1610_MMC2_DATDIR1,
R18_1610_MMC2_CLKIN,
/* OMAP-1610 External Trace Interface */
M19_1610_ETM_PSTAT0,
L15_1610_ETM_PSTAT1,
L18_1610_ETM_PSTAT2,
L19_1610_ETM_D0,
J19_1610_ETM_D6,
J18_1610_ETM_D7,
/* OMAP16XX GPIO */
P20_1610_GPIO4,
V9_1610_GPIO7,
W8_1610_GPIO9,
N20_1610_GPIO11,
N19_1610_GPIO13,
P10_1610_GPIO22,
V5_1610_GPIO24,
AA20_1610_GPIO_41,
W19_1610_GPIO48,
M7_1610_GPIO62,
V14_16XX_GPIO37,
R9_16XX_GPIO18,
L14_16XX_GPIO49,
/* OMAP-1610 uWire */
V19_1610_UWIRE_SCLK,
U18_1610_UWIRE_SDI,
W21_1610_UWIRE_SDO,
N14_1610_UWIRE_CS0,
P15_1610_UWIRE_CS3,
N15_1610_UWIRE_CS1,
/* OMAP-1610 SPI */
U19_1610_SPIF_SCK,
U18_1610_SPIF_DIN,
P20_1610_SPIF_DIN,
W21_1610_SPIF_DOUT,
R18_1610_SPIF_DOUT,
N14_1610_SPIF_CS0,
N15_1610_SPIF_CS1,
T19_1610_SPIF_CS2,
P15_1610_SPIF_CS3,
/* OMAP-1610 Flash */
L3_1610_FLASH_CS2B_OE,
M8_1610_FLASH_CS2B_WE,
/* First MMC */
MMC_CMD,
MMC_DAT1,
MMC_DAT2,
MMC_DAT0,
MMC_CLK,
MMC_DAT3,
/* OMAP-1710 MMC CMDDIR and DATDIR0 */
M15_1710_MMC_CLKI,
P19_1710_MMC_CMDDIR,
P20_1710_MMC_DATDIR0,
/* OMAP-1610 USB0 alternate pin configuration */
W9_USB0_TXEN,
AA9_USB0_VP,
Y5_USB0_RCV,
R9_USB0_VM,
V6_USB0_TXD,
W5_USB0_SE0,
V9_USB0_SPEED,
V9_USB0_SUSP,
/* USB2 */
W9_USB2_TXEN,
AA9_USB2_VP,
Y5_USB2_RCV,
R9_USB2_VM,
V6_USB2_TXD,
W5_USB2_SE0,
/* 16XX UART */
R13_1610_UART1_TX,
V14_16XX_UART1_RX,
R14_1610_UART1_CTS,
AA15_1610_UART1_RTS,
R9_16XX_UART2_RX,
L14_16XX_UART3_RX,
/* I2C OMAP-1610 */
I2C_SCL,
I2C_SDA,
/* Keypad */
F18_1610_KBC0,
D20_1610_KBC1,
D19_1610_KBC2,
E18_1610_KBC3,
C21_1610_KBC4,
G18_1610_KBR0,
F19_1610_KBR1,
H14_1610_KBR2,
E20_1610_KBR3,
E19_1610_KBR4,
N19_1610_KBR5,
/* Power management */
T20_1610_LOW_PWR,
/* MCLK Settings */
V5_1710_MCLK_ON,
V5_1710_MCLK_OFF,
R10_1610_MCLK_ON,
R10_1610_MCLK_OFF,
/* CompactFlash controller */
P11_1610_CF_CD2,
R11_1610_CF_IOIS16,
V10_1610_CF_IREQ,
W10_1610_CF_RESET,
W11_1610_CF_CD1,
/* parallel camera */
J15_1610_CAM_LCLK,
J18_1610_CAM_D7,
J19_1610_CAM_D6,
J14_1610_CAM_D5,
K18_1610_CAM_D4,
K19_1610_CAM_D3,
K15_1610_CAM_D2,
K14_1610_CAM_D1,
L19_1610_CAM_D0,
L18_1610_CAM_VS,
L15_1610_CAM_HS,
M19_1610_CAM_RSTZ,
Y15_1610_CAM_OUTCLK,
/* serial camera */
H19_1610_CAM_EXCLK,
Y12_1610_CCP_CLKP,
W13_1610_CCP_CLKM,
W14_1610_CCP_DATAP,
Y14_1610_CCP_DATAM,
};
enum omap24xx_index {
/* 24xx I2C */
M19_24XX_I2C1_SCL,
L15_24XX_I2C1_SDA,
J15_24XX_I2C2_SCL,
H19_24XX_I2C2_SDA,
/* 24xx Menelaus interrupt */
W19_24XX_SYS_NIRQ,
/* 24xx clock */
W14_24XX_SYS_CLKOUT,
/* 24xx GPMC chipselects, wait pin monitoring */
E2_GPMC_NCS2,
L2_GPMC_NCS7,
L3_GPMC_WAIT0,
N7_GPMC_WAIT1,
M1_GPMC_WAIT2,
P1_GPMC_WAIT3,
/* 242X McBSP */
Y15_24XX_MCBSP2_CLKX,
R14_24XX_MCBSP2_FSX,
W15_24XX_MCBSP2_DR,
V15_24XX_MCBSP2_DX,
/* 24xx GPIO */
M21_242X_GPIO11,
P21_242X_GPIO12,
AA10_242X_GPIO13,
AA6_242X_GPIO14,
AA4_242X_GPIO15,
Y11_242X_GPIO16,
AA12_242X_GPIO17,
AA8_242X_GPIO58,
Y20_24XX_GPIO60,
W4__24XX_GPIO74,
N15_24XX_GPIO85,
M15_24XX_GPIO92,
P20_24XX_GPIO93,
P18_24XX_GPIO95,
M18_24XX_GPIO96,
L14_24XX_GPIO97,
J15_24XX_GPIO99,
V14_24XX_GPIO117,
P14_24XX_GPIO125,
/* 242x DBG GPIO */
V4_242X_GPIO49,
W2_242X_GPIO50,
U4_242X_GPIO51,
V3_242X_GPIO52,
V2_242X_GPIO53,
V6_242X_GPIO53,
T4_242X_GPIO54,
Y4_242X_GPIO54,
T3_242X_GPIO55,
U2_242X_GPIO56,
/* 24xx external DMA requests */
AA10_242X_DMAREQ0,
AA6_242X_DMAREQ1,
E4_242X_DMAREQ2,
G4_242X_DMAREQ3,
D3_242X_DMAREQ4,
E3_242X_DMAREQ5,
/* UART3 */
K15_24XX_UART3_TX,
K14_24XX_UART3_RX,
/* MMC/SDIO */
G19_24XX_MMC_CLKO,
H18_24XX_MMC_CMD,
F20_24XX_MMC_DAT0,
H14_24XX_MMC_DAT1,
E19_24XX_MMC_DAT2,
D19_24XX_MMC_DAT3,
F19_24XX_MMC_DAT_DIR0,
E20_24XX_MMC_DAT_DIR1,
F18_24XX_MMC_DAT_DIR2,
E18_24XX_MMC_DAT_DIR3,
G18_24XX_MMC_CMD_DIR,
H15_24XX_MMC_CLKI,
/* Full speed USB */
J20_24XX_USB0_PUEN,
J19_24XX_USB0_VP,
K20_24XX_USB0_VM,
J18_24XX_USB0_RCV,
K19_24XX_USB0_TXEN,
J14_24XX_USB0_SE0,
K18_24XX_USB0_DAT,
N14_24XX_USB1_SE0,
W12_24XX_USB1_SE0,
P15_24XX_USB1_DAT,
R13_24XX_USB1_DAT,
W20_24XX_USB1_TXEN,
P13_24XX_USB1_TXEN,
V19_24XX_USB1_RCV,
V12_24XX_USB1_RCV,
AA10_24XX_USB2_SE0,
Y11_24XX_USB2_DAT,
AA12_24XX_USB2_TXEN,
AA6_24XX_USB2_RCV,
AA4_24XX_USB2_TLLSE0,
/* Keypad GPIO*/
T19_24XX_KBR0,
R19_24XX_KBR1,
V18_24XX_KBR2,
M21_24XX_KBR3,
E5__24XX_KBR4,
M18_24XX_KBR5,
R20_24XX_KBC0,
M14_24XX_KBC1,
H19_24XX_KBC2,
V17_24XX_KBC3,
P21_24XX_KBC4,
L14_24XX_KBC5,
N19_24XX_KBC6,
/* 24xx Menelaus Keypad GPIO */
B3__24XX_KBR5,
AA4_24XX_KBC2,
B13_24XX_KBC6,
/* 2430 USB */
AD9_2430_USB0_PUEN,
Y11_2430_USB0_VP,
AD7_2430_USB0_VM,
AE7_2430_USB0_RCV,
AD4_2430_USB0_TXEN,
AF9_2430_USB0_SE0,
AE6_2430_USB0_DAT,
AD24_2430_USB1_SE0,
AB24_2430_USB1_RCV,
Y25_2430_USB1_TXEN,
AA26_2430_USB1_DAT,
/* 2430 HS-USB */
AD9_2430_USB0HS_DATA3,
Y11_2430_USB0HS_DATA4,
AD7_2430_USB0HS_DATA5,
AE7_2430_USB0HS_DATA6,
AD4_2430_USB0HS_DATA2,
AF9_2430_USB0HS_DATA0,
AE6_2430_USB0HS_DATA1,
AE8_2430_USB0HS_CLK,
AD8_2430_USB0HS_DIR,
AE5_2430_USB0HS_STP,
AE9_2430_USB0HS_NXT,
AC7_2430_USB0HS_DATA7,
/* 2430 McBSP */
AD6_2430_MCBSP_CLKS,
AB2_2430_MCBSP1_CLKR,
AD5_2430_MCBSP1_FSR,
AA1_2430_MCBSP1_DX,
AF3_2430_MCBSP1_DR,
AB3_2430_MCBSP1_FSX,
Y9_2430_MCBSP1_CLKX,
AC10_2430_MCBSP2_FSX,
AD16_2430_MCBSP2_CLX,
AE13_2430_MCBSP2_DX,
AD13_2430_MCBSP2_DR,
AC10_2430_MCBSP2_FSX_OFF,
AD16_2430_MCBSP2_CLX_OFF,
AE13_2430_MCBSP2_DX_OFF,
AD13_2430_MCBSP2_DR_OFF,
AC9_2430_MCBSP3_CLKX,
AE4_2430_MCBSP3_FSX,
AE2_2430_MCBSP3_DR,
AF4_2430_MCBSP3_DX,
N3_2430_MCBSP4_CLKX,
AD23_2430_MCBSP4_DR,
AB25_2430_MCBSP4_DX,
AC25_2430_MCBSP4_FSX,
AE16_2430_MCBSP5_CLKX,
AF12_2430_MCBSP5_FSX,
K7_2430_MCBSP5_DX,
M1_2430_MCBSP5_DR,
/* 2430 McSPI*/
Y18_2430_MCSPI1_CLK,
AD15_2430_MCSPI1_SIMO,
AE17_2430_MCSPI1_SOMI,
U1_2430_MCSPI1_CS0,
/* Touchscreen GPIO */
AF19_2430_GPIO_85,
};
enum omap34xx_index {
/* 34xx I2C */
K21_34XX_I2C1_SCL,
J21_34XX_I2C1_SDA,
AF15_34XX_I2C2_SCL,
AE15_34XX_I2C2_SDA,
AF14_34XX_I2C3_SCL,
AG14_34XX_I2C3_SDA,
AD26_34XX_I2C4_SCL,
AE26_34XX_I2C4_SDA,
/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
Y8_3430_USB1HS_PHY_CLK,
Y9_3430_USB1HS_PHY_STP,
AA14_3430_USB1HS_PHY_DIR,
AA11_3430_USB1HS_PHY_NXT,
W13_3430_USB1HS_PHY_DATA0,
W12_3430_USB1HS_PHY_DATA1,
W11_3430_USB1HS_PHY_DATA2,
Y11_3430_USB1HS_PHY_DATA3,
W9_3430_USB1HS_PHY_DATA4,
Y12_3430_USB1HS_PHY_DATA5,
W8_3430_USB1HS_PHY_DATA6,
Y13_3430_USB1HS_PHY_DATA7,
/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
AA8_3430_USB2HS_PHY_CLK,
AA10_3430_USB2HS_PHY_STP,
AA9_3430_USB2HS_PHY_DIR,
AB11_3430_USB2HS_PHY_NXT,
AB10_3430_USB2HS_PHY_DATA0,
AB9_3430_USB2HS_PHY_DATA1,
W3_3430_USB2HS_PHY_DATA2,
T4_3430_USB2HS_PHY_DATA3,
T3_3430_USB2HS_PHY_DATA4,
R3_3430_USB2HS_PHY_DATA5,
R4_3430_USB2HS_PHY_DATA6,
T2_3430_USB2HS_PHY_DATA7,
/* TLL - HSUSB: 12-pin TLL Port 1*/
Y8_3430_USB1HS_TLL_CLK,
Y9_3430_USB1HS_TLL_STP,
AA14_3430_USB1HS_TLL_DIR,
AA11_3430_USB1HS_TLL_NXT,
W13_3430_USB1HS_TLL_DATA0,
W12_3430_USB1HS_TLL_DATA1,
W11_3430_USB1HS_TLL_DATA2,
Y11_3430_USB1HS_TLL_DATA3,
W9_3430_USB1HS_TLL_DATA4,
Y12_3430_USB1HS_TLL_DATA5,
W8_3430_USB1HS_TLL_DATA6,
Y13_3430_USB1HS_TLL_DATA7,
/* TLL - HSUSB: 12-pin TLL Port 2*/
AA8_3430_USB2HS_TLL_CLK,
AA10_3430_USB2HS_TLL_STP,
AA9_3430_USB2HS_TLL_DIR,
AB11_3430_USB2HS_TLL_NXT,
AB10_3430_USB2HS_TLL_DATA0,
AB9_3430_USB2HS_TLL_DATA1,
W3_3430_USB2HS_TLL_DATA2,
T4_3430_USB2HS_TLL_DATA3,
T3_3430_USB2HS_TLL_DATA4,
R3_3430_USB2HS_TLL_DATA5,
R4_3430_USB2HS_TLL_DATA6,
T2_3430_USB2HS_TLL_DATA7,
/* TLL - HSUSB: 12-pin TLL Port 3*/
AA6_3430_USB3HS_TLL_CLK,
AB3_3430_USB3HS_TLL_STP,
AA3_3430_USB3HS_TLL_DIR,
Y3_3430_USB3HS_TLL_NXT,
AA5_3430_USB3HS_TLL_DATA0,
Y4_3430_USB3HS_TLL_DATA1,
Y5_3430_USB3HS_TLL_DATA2,
W5_3430_USB3HS_TLL_DATA3,
AB12_3430_USB3HS_TLL_DATA4,
AB13_3430_USB3HS_TLL_DATA5,
AA13_3430_USB3HS_TLL_DATA6,
AA12_3430_USB3HS_TLL_DATA7,
/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
AF10_3430_USB1FS_PHY_MM1_RXDP,
AG9_3430_USB1FS_PHY_MM1_RXDM,
W13_3430_USB1FS_PHY_MM1_RXRCV,
W12_3430_USB1FS_PHY_MM1_TXSE0,
W11_3430_USB1FS_PHY_MM1_TXDAT,
Y11_3430_USB1FS_PHY_MM1_TXEN_N,
/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
AF7_3430_USB2FS_PHY_MM2_RXDP,
AH7_3430_USB2FS_PHY_MM2_RXDM,
AB10_3430_USB2FS_PHY_MM2_RXRCV,
AB9_3430_USB2FS_PHY_MM2_TXSE0,
W3_3430_USB2FS_PHY_MM2_TXDAT,
T4_3430_USB2FS_PHY_MM2_TXEN_N,
/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
AH3_3430_USB3FS_PHY_MM3_RXDP,
AE3_3430_USB3FS_PHY_MM3_RXDM,
AD1_3430_USB3FS_PHY_MM3_RXRCV,
AE1_3430_USB3FS_PHY_MM3_TXSE0,
AD2_3430_USB3FS_PHY_MM3_TXDAT,
AC1_3430_USB3FS_PHY_MM3_TXEN_N,
/* 34xx GPIO
* - normally these are bidirectional, no internal pullup/pulldown
* - "_UP" suffix (GPIO3_UP) if internal pullup is configured
* - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown
* - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx)
*/
AH8_34XX_GPIO29,
J25_34XX_GPIO170,
};
struct omap_mux_cfg {
struct pin_config *pins;
unsigned long size;
int (*cfg_reg)(const struct pin_config *cfg);
};
#ifdef CONFIG_OMAP_MUX
/* setup pin muxing in Linux */
extern int omap1_mux_init(void);
extern int omap2_mux_init(void);
extern int omap_mux_register(struct omap_mux_cfg *);
extern int omap_cfg_reg(unsigned long reg_cfg);
#else
/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
static inline int omap1_mux_init(void) { return 0; }
static inline int omap2_mux_init(void) { return 0; }
static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
#endif
#endif
Reference in New Issue View Git Blame Copy Permalink