linux/tools/bootconfig/test-bootconfig.sh
Masami Hiramatsu e1cef2d4c3 tools/bootconfig: Align the bootconfig applied initrd image size to 4
Align the bootconfig applied initrd image size to 4. To fill the gap,
the bootconfig command uses null characters in between the bootconfig
data and the footer. This will expands the footer size but don't change
the checksum.
Thus the block image of the initrd file with bootconfig is as follows.

[initrd][bootconfig][(pad)][size][csum]["#BOOTCONFIG\n"]

Link: https://lkml.kernel.org/r/160576522046.320071.8550680670010950634.stgit@devnote2

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-19 08:55:44 -05:00

192 lines
3.9 KiB
Bash
Executable File

#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-only
echo "Boot config test script"
if [ -d "$1" ]; then
TESTDIR=$1
else
TESTDIR=.
fi
BOOTCONF=${TESTDIR}/bootconfig
ALIGN=4
INITRD=`mktemp ${TESTDIR}/initrd-XXXX`
TEMPCONF=`mktemp ${TESTDIR}/temp-XXXX.bconf`
OUTFILE=`mktemp ${TESTDIR}/tempout-XXXX`
NG=0
cleanup() {
rm -f $INITRD $TEMPCONF $OUTFILE
exit $NG
}
trap cleanup EXIT TERM
NO=1
xpass() { # pass test command
echo "test case $NO ($3)... "
if ! ($@ && echo "\t\t[OK]"); then
echo "\t\t[NG]"; NG=$((NG + 1))
fi
NO=$((NO + 1))
}
xfail() { # fail test command
echo "test case $NO ($3)... "
if ! (! $@ && echo "\t\t[OK]"); then
echo "\t\t[NG]"; NG=$((NG + 1))
fi
NO=$((NO + 1))
}
echo "Basic command test"
xpass $BOOTCONF $INITRD
echo "Delete command should success without bootconfig"
xpass $BOOTCONF -d $INITRD
dd if=/dev/zero of=$INITRD bs=4096 count=1
echo "key = value;" > $TEMPCONF
bconf_size=$(stat -c %s $TEMPCONF)
initrd_size=$(stat -c %s $INITRD)
echo "Apply command test"
xpass $BOOTCONF -a $TEMPCONF $INITRD
new_size=$(stat -c %s $INITRD)
echo "Show command test"
xpass $BOOTCONF $INITRD
echo "File size check"
total_size=$(expr $bconf_size + $initrd_size + 9 + 12 + $ALIGN - 1 )
total_size=$(expr $total_size / $ALIGN)
total_size=$(expr $total_size \* $ALIGN)
xpass test $new_size -eq $total_size
echo "Apply command repeat test"
xpass $BOOTCONF -a $TEMPCONF $INITRD
echo "File size check"
xpass test $new_size -eq $(stat -c %s $INITRD)
echo "Delete command check"
xpass $BOOTCONF -d $INITRD
echo "File size check"
new_size=$(stat -c %s $INITRD)
xpass test $new_size -eq $initrd_size
echo "No error messge while applying"
dd if=/dev/zero of=$INITRD bs=4096 count=1
printf " \0\0\0 \0\0\0" >> $INITRD
$BOOTCONF -a $TEMPCONF $INITRD > $OUTFILE 2>&1
xfail grep -i "failed" $OUTFILE
xfail grep -i "error" $OUTFILE
echo "Max node number check"
echo -n > $TEMPCONF
for i in `seq 1 1024` ; do
echo "node$i" >> $TEMPCONF
done
xpass $BOOTCONF -a $TEMPCONF $INITRD
echo "badnode" >> $TEMPCONF
xfail $BOOTCONF -a $TEMPCONF $INITRD
echo "Max filesize check"
# Max size is 32767 (including terminal byte)
echo -n "data = \"" > $TEMPCONF
dd if=/dev/urandom bs=768 count=32 | base64 -w0 >> $TEMPCONF
echo "\"" >> $TEMPCONF
xfail $BOOTCONF -a $TEMPCONF $INITRD
truncate -s 32764 $TEMPCONF
echo "\"" >> $TEMPCONF # add 2 bytes + terminal ('\"\n\0')
xpass $BOOTCONF -a $TEMPCONF $INITRD
echo "Adding same-key values"
cat > $TEMPCONF << EOF
key = bar, baz
key += qux
EOF
echo > $INITRD
xpass $BOOTCONF -a $TEMPCONF $INITRD
$BOOTCONF $INITRD > $OUTFILE
xpass grep -q "bar" $OUTFILE
xpass grep -q "baz" $OUTFILE
xpass grep -q "qux" $OUTFILE
echo "Override same-key values"
cat > $TEMPCONF << EOF
key = bar, baz
key := qux
EOF
echo > $INITRD
xpass $BOOTCONF -a $TEMPCONF $INITRD
$BOOTCONF $INITRD > $OUTFILE
xfail grep -q "bar" $OUTFILE
xfail grep -q "baz" $OUTFILE
xpass grep -q "qux" $OUTFILE
echo "Double/single quotes test"
echo "key = '\"string\"';" > $TEMPCONF
$BOOTCONF -a $TEMPCONF $INITRD
$BOOTCONF $INITRD > $TEMPCONF
cat $TEMPCONF
xpass grep \'\"string\"\' $TEMPCONF
echo "Repeat same-key tree"
cat > $TEMPCONF << EOF
foo
bar
foo { buz }
EOF
echo > $INITRD
xpass $BOOTCONF -a $TEMPCONF $INITRD
$BOOTCONF $INITRD > $OUTFILE
xpass grep -q "bar" $OUTFILE
echo "Remove/keep tailing spaces"
cat > $TEMPCONF << EOF
foo = val # comment
bar = "val2 " # comment
EOF
echo > $INITRD
xpass $BOOTCONF -a $TEMPCONF $INITRD
$BOOTCONF $INITRD > $OUTFILE
xfail grep -q val[[:space:]] $OUTFILE
xpass grep -q val2[[:space:]] $OUTFILE
echo "=== expected failure cases ==="
for i in samples/bad-* ; do
xfail $BOOTCONF -a $i $INITRD
done
echo "=== expected success cases ==="
for i in samples/good-* ; do
xpass $BOOTCONF -a $i $INITRD
done
echo
echo "=== Summary ==="
echo "# of Passed: $(expr $NO - $NG - 1)"
echo "# of Failed: $NG"
echo
if [ $NG -eq 0 ]; then
echo "All tests passed"
else
echo "$NG tests failed"
exit 1
fi