mirror of
https://github.com/torvalds/linux.git
synced 2024-12-24 20:01:55 +00:00
a1880d3867
This patch adds a DT binding documentation for the MT7629 soc. Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
63 lines
2.2 KiB
Plaintext
63 lines
2.2 KiB
Plaintext
Binding for MTK SPI controller
|
|
|
|
Required properties:
|
|
- compatible: should be one of the following.
|
|
- mediatek,mt2701-spi: for mt2701 platforms
|
|
- mediatek,mt2712-spi: for mt2712 platforms
|
|
- mediatek,mt6589-spi: for mt6589 platforms
|
|
- mediatek,mt7622-spi: for mt7622 platforms
|
|
- "mediatek,mt7629-spi", "mediatek,mt7622-spi": for mt7629 platforms
|
|
- mediatek,mt8135-spi: for mt8135 platforms
|
|
- mediatek,mt8173-spi: for mt8173 platforms
|
|
- mediatek,mt8183-spi: for mt8183 platforms
|
|
|
|
- #address-cells: should be 1.
|
|
|
|
- #size-cells: should be 0.
|
|
|
|
- reg: Address and length of the register set for the device
|
|
|
|
- interrupts: Should contain spi interrupt
|
|
|
|
- clocks: phandles to input clocks.
|
|
The first should be one of the following. It's PLL.
|
|
- <&clk26m>: specify parent clock 26MHZ.
|
|
- <&topckgen CLK_TOP_SYSPLL3_D2>: specify parent clock 109MHZ.
|
|
It's the default one.
|
|
- <&topckgen CLK_TOP_SYSPLL4_D2>: specify parent clock 78MHZ.
|
|
- <&topckgen CLK_TOP_UNIVPLL2_D4>: specify parent clock 104MHZ.
|
|
- <&topckgen CLK_TOP_UNIVPLL1_D8>: specify parent clock 78MHZ.
|
|
The second should be <&topckgen CLK_TOP_SPI_SEL>. It's clock mux.
|
|
The third is <&pericfg CLK_PERI_SPI0>. It's clock gate.
|
|
|
|
- clock-names: shall be "parent-clk" for the parent clock, "sel-clk" for the
|
|
muxes clock, and "spi-clk" for the clock gate.
|
|
|
|
Optional properties:
|
|
-cs-gpios: see spi-bus.txt.
|
|
|
|
- mediatek,pad-select: specify which pins group(ck/mi/mo/cs) spi
|
|
controller used. This is an array, the element value should be 0~3,
|
|
only required for MT8173.
|
|
0: specify GPIO69,70,71,72 for spi pins.
|
|
1: specify GPIO102,103,104,105 for spi pins.
|
|
2: specify GPIO128,129,130,131 for spi pins.
|
|
3: specify GPIO5,6,7,8 for spi pins.
|
|
|
|
Example:
|
|
|
|
- SoC Specific Portion:
|
|
spi: spi@1100a000 {
|
|
compatible = "mediatek,mt8173-spi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0 0x1100a000 0 0x1000>;
|
|
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
|
|
<&topckgen CLK_TOP_SPI_SEL>,
|
|
<&pericfg CLK_PERI_SPI0>;
|
|
clock-names = "parent-clk", "sel-clk", "spi-clk";
|
|
cs-gpios = <&pio 105 GPIO_ACTIVE_LOW>, <&pio 72 GPIO_ACTIVE_LOW>;
|
|
mediatek,pad-select = <1>, <0>;
|
|
};
|