mirror of
https://github.com/torvalds/linux.git
synced 2024-12-23 11:21:33 +00:00
1c5fb66afa
These drivers are GPIO drivers, and the do not need to use the legacy header in <linux/gpio.h>, go directly for <linux/gpio/driver.h> instead. Replace any use of GPIOF_* with 0/1, these flags are for consumers, not drivers. Get rid of a few gpio_to_irq() users that was littering around the place, use local callbacks or avoid using it at all. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
886 lines
21 KiB
C
886 lines
21 KiB
C
/*
|
|
* Copyright (c) 2015, Sony Mobile Communications AB.
|
|
* Copyright (c) 2013, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
#include <linux/pinctrl/pinmux.h>
|
|
#include <linux/pinctrl/pinconf.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_irq.h>
|
|
|
|
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
|
|
|
|
#include "../core.h"
|
|
#include "../pinctrl-utils.h"
|
|
|
|
/* MPP registers */
|
|
#define SSBI_REG_ADDR_MPP_BASE 0x50
|
|
#define SSBI_REG_ADDR_MPP(n) (SSBI_REG_ADDR_MPP_BASE + n)
|
|
|
|
/* MPP Type: type */
|
|
#define PM8XXX_MPP_TYPE_D_INPUT 0
|
|
#define PM8XXX_MPP_TYPE_D_OUTPUT 1
|
|
#define PM8XXX_MPP_TYPE_D_BI_DIR 2
|
|
#define PM8XXX_MPP_TYPE_A_INPUT 3
|
|
#define PM8XXX_MPP_TYPE_A_OUTPUT 4
|
|
#define PM8XXX_MPP_TYPE_SINK 5
|
|
#define PM8XXX_MPP_TYPE_DTEST_SINK 6
|
|
#define PM8XXX_MPP_TYPE_DTEST_OUTPUT 7
|
|
|
|
/* Digital Input: control */
|
|
#define PM8XXX_MPP_DIN_TO_INT 0
|
|
#define PM8XXX_MPP_DIN_TO_DBUS1 1
|
|
#define PM8XXX_MPP_DIN_TO_DBUS2 2
|
|
#define PM8XXX_MPP_DIN_TO_DBUS3 3
|
|
|
|
/* Digital Output: control */
|
|
#define PM8XXX_MPP_DOUT_CTRL_LOW 0
|
|
#define PM8XXX_MPP_DOUT_CTRL_HIGH 1
|
|
#define PM8XXX_MPP_DOUT_CTRL_MPP 2
|
|
#define PM8XXX_MPP_DOUT_CTRL_INV_MPP 3
|
|
|
|
/* Bidirectional: control */
|
|
#define PM8XXX_MPP_BI_PULLUP_1KOHM 0
|
|
#define PM8XXX_MPP_BI_PULLUP_OPEN 1
|
|
#define PM8XXX_MPP_BI_PULLUP_10KOHM 2
|
|
#define PM8XXX_MPP_BI_PULLUP_30KOHM 3
|
|
|
|
/* Analog Output: control */
|
|
#define PM8XXX_MPP_AOUT_CTRL_DISABLE 0
|
|
#define PM8XXX_MPP_AOUT_CTRL_ENABLE 1
|
|
#define PM8XXX_MPP_AOUT_CTRL_MPP_HIGH_EN 2
|
|
#define PM8XXX_MPP_AOUT_CTRL_MPP_LOW_EN 3
|
|
|
|
/* Current Sink: control */
|
|
#define PM8XXX_MPP_CS_CTRL_DISABLE 0
|
|
#define PM8XXX_MPP_CS_CTRL_ENABLE 1
|
|
#define PM8XXX_MPP_CS_CTRL_MPP_HIGH_EN 2
|
|
#define PM8XXX_MPP_CS_CTRL_MPP_LOW_EN 3
|
|
|
|
/* DTEST Current Sink: control */
|
|
#define PM8XXX_MPP_DTEST_CS_CTRL_EN1 0
|
|
#define PM8XXX_MPP_DTEST_CS_CTRL_EN2 1
|
|
#define PM8XXX_MPP_DTEST_CS_CTRL_EN3 2
|
|
#define PM8XXX_MPP_DTEST_CS_CTRL_EN4 3
|
|
|
|
/* DTEST Digital Output: control */
|
|
#define PM8XXX_MPP_DTEST_DBUS1 0
|
|
#define PM8XXX_MPP_DTEST_DBUS2 1
|
|
#define PM8XXX_MPP_DTEST_DBUS3 2
|
|
#define PM8XXX_MPP_DTEST_DBUS4 3
|
|
|
|
/* custom pinconf parameters */
|
|
#define PM8XXX_CONFIG_AMUX (PIN_CONFIG_END + 1)
|
|
#define PM8XXX_CONFIG_DTEST_SELECTOR (PIN_CONFIG_END + 2)
|
|
#define PM8XXX_CONFIG_ALEVEL (PIN_CONFIG_END + 3)
|
|
#define PM8XXX_CONFIG_PAIRED (PIN_CONFIG_END + 4)
|
|
|
|
/**
|
|
* struct pm8xxx_pin_data - dynamic configuration for a pin
|
|
* @reg: address of the control register
|
|
* @irq: IRQ from the PMIC interrupt controller
|
|
* @mode: operating mode for the pin (digital, analog or current sink)
|
|
* @input: pin is input
|
|
* @output: pin is output
|
|
* @high_z: pin is floating
|
|
* @paired: mpp operates in paired mode
|
|
* @output_value: logical output value of the mpp
|
|
* @power_source: selected power source
|
|
* @dtest: DTEST route selector
|
|
* @amux: input muxing in analog mode
|
|
* @aout_level: selector of the output in analog mode
|
|
* @drive_strength: drive strength of the current sink
|
|
* @pullup: pull up value, when in digital bidirectional mode
|
|
*/
|
|
struct pm8xxx_pin_data {
|
|
unsigned reg;
|
|
int irq;
|
|
|
|
u8 mode;
|
|
|
|
bool input;
|
|
bool output;
|
|
bool high_z;
|
|
bool paired;
|
|
bool output_value;
|
|
|
|
u8 power_source;
|
|
u8 dtest;
|
|
u8 amux;
|
|
u8 aout_level;
|
|
u8 drive_strength;
|
|
unsigned pullup;
|
|
};
|
|
|
|
struct pm8xxx_mpp {
|
|
struct device *dev;
|
|
struct regmap *regmap;
|
|
struct pinctrl_dev *pctrl;
|
|
struct gpio_chip chip;
|
|
|
|
struct pinctrl_desc desc;
|
|
unsigned npins;
|
|
};
|
|
|
|
static const struct pinconf_generic_params pm8xxx_mpp_bindings[] = {
|
|
{"qcom,amux-route", PM8XXX_CONFIG_AMUX, 0},
|
|
{"qcom,analog-level", PM8XXX_CONFIG_ALEVEL, 0},
|
|
{"qcom,dtest", PM8XXX_CONFIG_DTEST_SELECTOR, 0},
|
|
{"qcom,paired", PM8XXX_CONFIG_PAIRED, 0},
|
|
};
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
static const struct pin_config_item pm8xxx_conf_items[] = {
|
|
PCONFDUMP(PM8XXX_CONFIG_AMUX, "analog mux", NULL, true),
|
|
PCONFDUMP(PM8XXX_CONFIG_ALEVEL, "analog level", NULL, true),
|
|
PCONFDUMP(PM8XXX_CONFIG_DTEST_SELECTOR, "dtest", NULL, true),
|
|
PCONFDUMP(PM8XXX_CONFIG_PAIRED, "paired", NULL, false),
|
|
};
|
|
#endif
|
|
|
|
#define PM8XXX_MAX_MPPS 12
|
|
static const char * const pm8xxx_groups[PM8XXX_MAX_MPPS] = {
|
|
"mpp1", "mpp2", "mpp3", "mpp4", "mpp5", "mpp6", "mpp7", "mpp8",
|
|
"mpp9", "mpp10", "mpp11", "mpp12",
|
|
};
|
|
|
|
#define PM8XXX_MPP_DIGITAL 0
|
|
#define PM8XXX_MPP_ANALOG 1
|
|
#define PM8XXX_MPP_SINK 2
|
|
|
|
static const char * const pm8xxx_mpp_functions[] = {
|
|
"digital", "analog", "sink",
|
|
};
|
|
|
|
static int pm8xxx_mpp_update(struct pm8xxx_mpp *pctrl,
|
|
struct pm8xxx_pin_data *pin)
|
|
{
|
|
unsigned level;
|
|
unsigned ctrl;
|
|
unsigned type;
|
|
int ret;
|
|
u8 val;
|
|
|
|
switch (pin->mode) {
|
|
case PM8XXX_MPP_DIGITAL:
|
|
if (pin->dtest) {
|
|
type = PM8XXX_MPP_TYPE_DTEST_OUTPUT;
|
|
ctrl = pin->dtest - 1;
|
|
} else if (pin->input && pin->output) {
|
|
type = PM8XXX_MPP_TYPE_D_BI_DIR;
|
|
if (pin->high_z)
|
|
ctrl = PM8XXX_MPP_BI_PULLUP_OPEN;
|
|
else if (pin->pullup == 600)
|
|
ctrl = PM8XXX_MPP_BI_PULLUP_1KOHM;
|
|
else if (pin->pullup == 10000)
|
|
ctrl = PM8XXX_MPP_BI_PULLUP_10KOHM;
|
|
else
|
|
ctrl = PM8XXX_MPP_BI_PULLUP_30KOHM;
|
|
} else if (pin->input) {
|
|
type = PM8XXX_MPP_TYPE_D_INPUT;
|
|
if (pin->dtest)
|
|
ctrl = pin->dtest;
|
|
else
|
|
ctrl = PM8XXX_MPP_DIN_TO_INT;
|
|
} else {
|
|
type = PM8XXX_MPP_TYPE_D_OUTPUT;
|
|
ctrl = !!pin->output_value;
|
|
if (pin->paired)
|
|
ctrl |= BIT(1);
|
|
}
|
|
|
|
level = pin->power_source;
|
|
break;
|
|
case PM8XXX_MPP_ANALOG:
|
|
if (pin->output) {
|
|
type = PM8XXX_MPP_TYPE_A_OUTPUT;
|
|
level = pin->aout_level;
|
|
ctrl = pin->output_value;
|
|
if (pin->paired)
|
|
ctrl |= BIT(1);
|
|
} else {
|
|
type = PM8XXX_MPP_TYPE_A_INPUT;
|
|
level = pin->amux;
|
|
ctrl = 0;
|
|
}
|
|
break;
|
|
case PM8XXX_MPP_SINK:
|
|
level = (pin->drive_strength / 5) - 1;
|
|
if (pin->dtest) {
|
|
type = PM8XXX_MPP_TYPE_DTEST_SINK;
|
|
ctrl = pin->dtest - 1;
|
|
} else {
|
|
type = PM8XXX_MPP_TYPE_SINK;
|
|
ctrl = pin->output_value;
|
|
if (pin->paired)
|
|
ctrl |= BIT(1);
|
|
}
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
val = type << 5 | level << 2 | ctrl;
|
|
ret = regmap_write(pctrl->regmap, pin->reg, val);
|
|
if (ret)
|
|
dev_err(pctrl->dev, "failed to write register\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int pm8xxx_get_groups_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pctrl->npins;
|
|
}
|
|
|
|
static const char *pm8xxx_get_group_name(struct pinctrl_dev *pctldev,
|
|
unsigned group)
|
|
{
|
|
return pm8xxx_groups[group];
|
|
}
|
|
|
|
|
|
static int pm8xxx_get_group_pins(struct pinctrl_dev *pctldev,
|
|
unsigned group,
|
|
const unsigned **pins,
|
|
unsigned *num_pins)
|
|
{
|
|
struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*pins = &pctrl->desc.pins[group].number;
|
|
*num_pins = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinctrl_ops pm8xxx_pinctrl_ops = {
|
|
.get_groups_count = pm8xxx_get_groups_count,
|
|
.get_group_name = pm8xxx_get_group_name,
|
|
.get_group_pins = pm8xxx_get_group_pins,
|
|
.dt_node_to_map = pinconf_generic_dt_node_to_map_group,
|
|
.dt_free_map = pinctrl_utils_free_map,
|
|
};
|
|
|
|
static int pm8xxx_get_functions_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
return ARRAY_SIZE(pm8xxx_mpp_functions);
|
|
}
|
|
|
|
static const char *pm8xxx_get_function_name(struct pinctrl_dev *pctldev,
|
|
unsigned function)
|
|
{
|
|
return pm8xxx_mpp_functions[function];
|
|
}
|
|
|
|
static int pm8xxx_get_function_groups(struct pinctrl_dev *pctldev,
|
|
unsigned function,
|
|
const char * const **groups,
|
|
unsigned * const num_groups)
|
|
{
|
|
struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*groups = pm8xxx_groups;
|
|
*num_groups = pctrl->npins;
|
|
return 0;
|
|
}
|
|
|
|
static int pm8xxx_pinmux_set_mux(struct pinctrl_dev *pctldev,
|
|
unsigned function,
|
|
unsigned group)
|
|
{
|
|
struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
struct pm8xxx_pin_data *pin = pctrl->desc.pins[group].drv_data;
|
|
|
|
pin->mode = function;
|
|
pm8xxx_mpp_update(pctrl, pin);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinmux_ops pm8xxx_pinmux_ops = {
|
|
.get_functions_count = pm8xxx_get_functions_count,
|
|
.get_function_name = pm8xxx_get_function_name,
|
|
.get_function_groups = pm8xxx_get_function_groups,
|
|
.set_mux = pm8xxx_pinmux_set_mux,
|
|
};
|
|
|
|
static int pm8xxx_pin_config_get(struct pinctrl_dev *pctldev,
|
|
unsigned int offset,
|
|
unsigned long *config)
|
|
{
|
|
struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
|
|
unsigned param = pinconf_to_config_param(*config);
|
|
unsigned arg;
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
arg = pin->pullup;
|
|
break;
|
|
case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
|
|
arg = pin->high_z;
|
|
break;
|
|
case PIN_CONFIG_INPUT_ENABLE:
|
|
arg = pin->input;
|
|
break;
|
|
case PIN_CONFIG_OUTPUT:
|
|
arg = pin->output_value;
|
|
break;
|
|
case PIN_CONFIG_POWER_SOURCE:
|
|
arg = pin->power_source;
|
|
break;
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
arg = pin->drive_strength;
|
|
break;
|
|
case PM8XXX_CONFIG_DTEST_SELECTOR:
|
|
arg = pin->dtest;
|
|
break;
|
|
case PM8XXX_CONFIG_AMUX:
|
|
arg = pin->amux;
|
|
break;
|
|
case PM8XXX_CONFIG_ALEVEL:
|
|
arg = pin->aout_level;
|
|
break;
|
|
case PM8XXX_CONFIG_PAIRED:
|
|
arg = pin->paired;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
*config = pinconf_to_config_packed(param, arg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pm8xxx_pin_config_set(struct pinctrl_dev *pctldev,
|
|
unsigned int offset,
|
|
unsigned long *configs,
|
|
unsigned num_configs)
|
|
{
|
|
struct pm8xxx_mpp *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
|
|
unsigned param;
|
|
unsigned arg;
|
|
unsigned i;
|
|
|
|
for (i = 0; i < num_configs; i++) {
|
|
param = pinconf_to_config_param(configs[i]);
|
|
arg = pinconf_to_config_argument(configs[i]);
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
pin->pullup = arg;
|
|
break;
|
|
case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
|
|
pin->high_z = true;
|
|
break;
|
|
case PIN_CONFIG_INPUT_ENABLE:
|
|
pin->input = true;
|
|
break;
|
|
case PIN_CONFIG_OUTPUT:
|
|
pin->output = true;
|
|
pin->output_value = !!arg;
|
|
break;
|
|
case PIN_CONFIG_POWER_SOURCE:
|
|
pin->power_source = arg;
|
|
break;
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
pin->drive_strength = arg;
|
|
break;
|
|
case PM8XXX_CONFIG_DTEST_SELECTOR:
|
|
pin->dtest = arg;
|
|
break;
|
|
case PM8XXX_CONFIG_AMUX:
|
|
pin->amux = arg;
|
|
break;
|
|
case PM8XXX_CONFIG_ALEVEL:
|
|
pin->aout_level = arg;
|
|
break;
|
|
case PM8XXX_CONFIG_PAIRED:
|
|
pin->paired = !!arg;
|
|
break;
|
|
default:
|
|
dev_err(pctrl->dev,
|
|
"unsupported config parameter: %x\n",
|
|
param);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
pm8xxx_mpp_update(pctrl, pin);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinconf_ops pm8xxx_pinconf_ops = {
|
|
.is_generic = true,
|
|
.pin_config_group_get = pm8xxx_pin_config_get,
|
|
.pin_config_group_set = pm8xxx_pin_config_set,
|
|
};
|
|
|
|
static struct pinctrl_desc pm8xxx_pinctrl_desc = {
|
|
.name = "pm8xxx_mpp",
|
|
.pctlops = &pm8xxx_pinctrl_ops,
|
|
.pmxops = &pm8xxx_pinmux_ops,
|
|
.confops = &pm8xxx_pinconf_ops,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int pm8xxx_mpp_direction_input(struct gpio_chip *chip,
|
|
unsigned offset)
|
|
{
|
|
struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip);
|
|
struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
|
|
|
|
switch (pin->mode) {
|
|
case PM8XXX_MPP_DIGITAL:
|
|
pin->input = true;
|
|
break;
|
|
case PM8XXX_MPP_ANALOG:
|
|
pin->input = true;
|
|
pin->output = true;
|
|
break;
|
|
case PM8XXX_MPP_SINK:
|
|
return -EINVAL;
|
|
}
|
|
|
|
pm8xxx_mpp_update(pctrl, pin);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pm8xxx_mpp_direction_output(struct gpio_chip *chip,
|
|
unsigned offset,
|
|
int value)
|
|
{
|
|
struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip);
|
|
struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
|
|
|
|
switch (pin->mode) {
|
|
case PM8XXX_MPP_DIGITAL:
|
|
pin->output = true;
|
|
break;
|
|
case PM8XXX_MPP_ANALOG:
|
|
pin->input = false;
|
|
pin->output = true;
|
|
break;
|
|
case PM8XXX_MPP_SINK:
|
|
pin->input = false;
|
|
pin->output = true;
|
|
break;
|
|
}
|
|
|
|
pm8xxx_mpp_update(pctrl, pin);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pm8xxx_mpp_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip);
|
|
struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
|
|
bool state;
|
|
int ret;
|
|
|
|
if (!pin->input)
|
|
return !!pin->output_value;
|
|
|
|
ret = irq_get_irqchip_state(pin->irq, IRQCHIP_STATE_LINE_LEVEL, &state);
|
|
if (!ret)
|
|
ret = !!state;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void pm8xxx_mpp_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip);
|
|
struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
|
|
|
|
pin->output_value = !!value;
|
|
|
|
pm8xxx_mpp_update(pctrl, pin);
|
|
}
|
|
|
|
static int pm8xxx_mpp_of_xlate(struct gpio_chip *chip,
|
|
const struct of_phandle_args *gpio_desc,
|
|
u32 *flags)
|
|
{
|
|
if (chip->of_gpio_n_cells < 2)
|
|
return -EINVAL;
|
|
|
|
if (flags)
|
|
*flags = gpio_desc->args[1];
|
|
|
|
return gpio_desc->args[0] - 1;
|
|
}
|
|
|
|
|
|
static int pm8xxx_mpp_to_irq(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip);
|
|
struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
|
|
|
|
return pin->irq;
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
#include <linux/seq_file.h>
|
|
|
|
static void pm8xxx_mpp_dbg_show_one(struct seq_file *s,
|
|
struct pinctrl_dev *pctldev,
|
|
struct gpio_chip *chip,
|
|
unsigned offset,
|
|
unsigned gpio)
|
|
{
|
|
struct pm8xxx_mpp *pctrl = gpiochip_get_data(chip);
|
|
struct pm8xxx_pin_data *pin = pctrl->desc.pins[offset].drv_data;
|
|
|
|
static const char * const aout_lvls[] = {
|
|
"1v25", "1v25_2", "0v625", "0v3125", "mpp", "abus1", "abus2",
|
|
"abus3"
|
|
};
|
|
|
|
static const char * const amuxs[] = {
|
|
"amux5", "amux6", "amux7", "amux8", "amux9", "abus1", "abus2",
|
|
"abus3",
|
|
};
|
|
|
|
seq_printf(s, " mpp%-2d:", offset + 1);
|
|
|
|
switch (pin->mode) {
|
|
case PM8XXX_MPP_DIGITAL:
|
|
seq_puts(s, " digital ");
|
|
if (pin->dtest) {
|
|
seq_printf(s, "dtest%d\n", pin->dtest);
|
|
} else if (pin->input && pin->output) {
|
|
if (pin->high_z)
|
|
seq_puts(s, "bi-dir high-z");
|
|
else
|
|
seq_printf(s, "bi-dir %dOhm", pin->pullup);
|
|
} else if (pin->input) {
|
|
if (pin->dtest)
|
|
seq_printf(s, "in dtest%d", pin->dtest);
|
|
else
|
|
seq_puts(s, "in gpio");
|
|
} else if (pin->output) {
|
|
seq_puts(s, "out ");
|
|
|
|
if (!pin->paired) {
|
|
seq_puts(s, pin->output_value ?
|
|
"high" : "low");
|
|
} else {
|
|
seq_puts(s, pin->output_value ?
|
|
"inverted" : "follow");
|
|
}
|
|
}
|
|
break;
|
|
case PM8XXX_MPP_ANALOG:
|
|
seq_puts(s, " analog ");
|
|
if (pin->output) {
|
|
seq_printf(s, "out %s ", aout_lvls[pin->aout_level]);
|
|
if (!pin->paired) {
|
|
seq_puts(s, pin->output_value ?
|
|
"high" : "low");
|
|
} else {
|
|
seq_puts(s, pin->output_value ?
|
|
"inverted" : "follow");
|
|
}
|
|
} else {
|
|
seq_printf(s, "input mux %s", amuxs[pin->amux]);
|
|
}
|
|
break;
|
|
case PM8XXX_MPP_SINK:
|
|
seq_printf(s, " sink %dmA ", pin->drive_strength);
|
|
if (pin->dtest) {
|
|
seq_printf(s, "dtest%d", pin->dtest);
|
|
} else {
|
|
if (!pin->paired) {
|
|
seq_puts(s, pin->output_value ?
|
|
"high" : "low");
|
|
} else {
|
|
seq_puts(s, pin->output_value ?
|
|
"inverted" : "follow");
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
static void pm8xxx_mpp_dbg_show(struct seq_file *s, struct gpio_chip *chip)
|
|
{
|
|
unsigned gpio = chip->base;
|
|
unsigned i;
|
|
|
|
for (i = 0; i < chip->ngpio; i++, gpio++) {
|
|
pm8xxx_mpp_dbg_show_one(s, NULL, chip, i, gpio);
|
|
seq_puts(s, "\n");
|
|
}
|
|
}
|
|
|
|
#else
|
|
#define pm8xxx_mpp_dbg_show NULL
|
|
#endif
|
|
|
|
static const struct gpio_chip pm8xxx_mpp_template = {
|
|
.direction_input = pm8xxx_mpp_direction_input,
|
|
.direction_output = pm8xxx_mpp_direction_output,
|
|
.get = pm8xxx_mpp_get,
|
|
.set = pm8xxx_mpp_set,
|
|
.of_xlate = pm8xxx_mpp_of_xlate,
|
|
.to_irq = pm8xxx_mpp_to_irq,
|
|
.dbg_show = pm8xxx_mpp_dbg_show,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int pm8xxx_pin_populate(struct pm8xxx_mpp *pctrl,
|
|
struct pm8xxx_pin_data *pin)
|
|
{
|
|
unsigned int val;
|
|
unsigned level;
|
|
unsigned ctrl;
|
|
unsigned type;
|
|
int ret;
|
|
|
|
ret = regmap_read(pctrl->regmap, pin->reg, &val);
|
|
if (ret) {
|
|
dev_err(pctrl->dev, "failed to read register\n");
|
|
return ret;
|
|
}
|
|
|
|
type = (val >> 5) & 7;
|
|
level = (val >> 2) & 7;
|
|
ctrl = (val) & 3;
|
|
|
|
switch (type) {
|
|
case PM8XXX_MPP_TYPE_D_INPUT:
|
|
pin->mode = PM8XXX_MPP_DIGITAL;
|
|
pin->input = true;
|
|
pin->power_source = level;
|
|
pin->dtest = ctrl;
|
|
break;
|
|
case PM8XXX_MPP_TYPE_D_OUTPUT:
|
|
pin->mode = PM8XXX_MPP_DIGITAL;
|
|
pin->output = true;
|
|
pin->power_source = level;
|
|
pin->output_value = !!(ctrl & BIT(0));
|
|
pin->paired = !!(ctrl & BIT(1));
|
|
break;
|
|
case PM8XXX_MPP_TYPE_D_BI_DIR:
|
|
pin->mode = PM8XXX_MPP_DIGITAL;
|
|
pin->input = true;
|
|
pin->output = true;
|
|
pin->power_source = level;
|
|
switch (ctrl) {
|
|
case PM8XXX_MPP_BI_PULLUP_1KOHM:
|
|
pin->pullup = 600;
|
|
break;
|
|
case PM8XXX_MPP_BI_PULLUP_OPEN:
|
|
pin->high_z = true;
|
|
break;
|
|
case PM8XXX_MPP_BI_PULLUP_10KOHM:
|
|
pin->pullup = 10000;
|
|
break;
|
|
case PM8XXX_MPP_BI_PULLUP_30KOHM:
|
|
pin->pullup = 30000;
|
|
break;
|
|
}
|
|
break;
|
|
case PM8XXX_MPP_TYPE_A_INPUT:
|
|
pin->mode = PM8XXX_MPP_ANALOG;
|
|
pin->input = true;
|
|
pin->amux = level;
|
|
break;
|
|
case PM8XXX_MPP_TYPE_A_OUTPUT:
|
|
pin->mode = PM8XXX_MPP_ANALOG;
|
|
pin->output = true;
|
|
pin->aout_level = level;
|
|
pin->output_value = !!(ctrl & BIT(0));
|
|
pin->paired = !!(ctrl & BIT(1));
|
|
break;
|
|
case PM8XXX_MPP_TYPE_SINK:
|
|
pin->mode = PM8XXX_MPP_SINK;
|
|
pin->drive_strength = 5 * (level + 1);
|
|
pin->output_value = !!(ctrl & BIT(0));
|
|
pin->paired = !!(ctrl & BIT(1));
|
|
break;
|
|
case PM8XXX_MPP_TYPE_DTEST_SINK:
|
|
pin->mode = PM8XXX_MPP_SINK;
|
|
pin->dtest = ctrl + 1;
|
|
pin->drive_strength = 5 * (level + 1);
|
|
break;
|
|
case PM8XXX_MPP_TYPE_DTEST_OUTPUT:
|
|
pin->mode = PM8XXX_MPP_DIGITAL;
|
|
pin->power_source = level;
|
|
if (ctrl >= 1)
|
|
pin->dtest = ctrl;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id pm8xxx_mpp_of_match[] = {
|
|
{ .compatible = "qcom,pm8018-mpp" },
|
|
{ .compatible = "qcom,pm8038-mpp" },
|
|
{ .compatible = "qcom,pm8058-mpp" },
|
|
{ .compatible = "qcom,pm8917-mpp" },
|
|
{ .compatible = "qcom,pm8821-mpp" },
|
|
{ .compatible = "qcom,pm8921-mpp" },
|
|
{ .compatible = "qcom,ssbi-mpp" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, pm8xxx_mpp_of_match);
|
|
|
|
static int pm8xxx_mpp_probe(struct platform_device *pdev)
|
|
{
|
|
struct pm8xxx_pin_data *pin_data;
|
|
struct pinctrl_pin_desc *pins;
|
|
struct pm8xxx_mpp *pctrl;
|
|
int ret;
|
|
int i, npins;
|
|
|
|
pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL);
|
|
if (!pctrl)
|
|
return -ENOMEM;
|
|
|
|
pctrl->dev = &pdev->dev;
|
|
npins = platform_irq_count(pdev);
|
|
if (!npins)
|
|
return -EINVAL;
|
|
if (npins < 0)
|
|
return npins;
|
|
pctrl->npins = npins;
|
|
|
|
pctrl->regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
|
if (!pctrl->regmap) {
|
|
dev_err(&pdev->dev, "parent regmap unavailable\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
pctrl->desc = pm8xxx_pinctrl_desc;
|
|
pctrl->desc.npins = pctrl->npins;
|
|
|
|
pins = devm_kcalloc(&pdev->dev,
|
|
pctrl->desc.npins,
|
|
sizeof(struct pinctrl_pin_desc),
|
|
GFP_KERNEL);
|
|
if (!pins)
|
|
return -ENOMEM;
|
|
|
|
pin_data = devm_kcalloc(&pdev->dev,
|
|
pctrl->desc.npins,
|
|
sizeof(struct pm8xxx_pin_data),
|
|
GFP_KERNEL);
|
|
if (!pin_data)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < pctrl->desc.npins; i++) {
|
|
pin_data[i].reg = SSBI_REG_ADDR_MPP(i);
|
|
pin_data[i].irq = platform_get_irq(pdev, i);
|
|
if (pin_data[i].irq < 0) {
|
|
dev_err(&pdev->dev,
|
|
"missing interrupts for pin %d\n", i);
|
|
return pin_data[i].irq;
|
|
}
|
|
|
|
ret = pm8xxx_pin_populate(pctrl, &pin_data[i]);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pins[i].number = i;
|
|
pins[i].name = pm8xxx_groups[i];
|
|
pins[i].drv_data = &pin_data[i];
|
|
}
|
|
pctrl->desc.pins = pins;
|
|
|
|
pctrl->desc.num_custom_params = ARRAY_SIZE(pm8xxx_mpp_bindings);
|
|
pctrl->desc.custom_params = pm8xxx_mpp_bindings;
|
|
#ifdef CONFIG_DEBUG_FS
|
|
pctrl->desc.custom_conf_items = pm8xxx_conf_items;
|
|
#endif
|
|
|
|
pctrl->pctrl = devm_pinctrl_register(&pdev->dev, &pctrl->desc, pctrl);
|
|
if (IS_ERR(pctrl->pctrl)) {
|
|
dev_err(&pdev->dev, "couldn't register pm8xxx mpp driver\n");
|
|
return PTR_ERR(pctrl->pctrl);
|
|
}
|
|
|
|
pctrl->chip = pm8xxx_mpp_template;
|
|
pctrl->chip.base = -1;
|
|
pctrl->chip.parent = &pdev->dev;
|
|
pctrl->chip.of_node = pdev->dev.of_node;
|
|
pctrl->chip.of_gpio_n_cells = 2;
|
|
pctrl->chip.label = dev_name(pctrl->dev);
|
|
pctrl->chip.ngpio = pctrl->npins;
|
|
ret = gpiochip_add_data(&pctrl->chip, pctrl);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed register gpiochip\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = gpiochip_add_pin_range(&pctrl->chip,
|
|
dev_name(pctrl->dev),
|
|
0, 0, pctrl->chip.ngpio);
|
|
if (ret) {
|
|
dev_err(pctrl->dev, "failed to add pin range\n");
|
|
goto unregister_gpiochip;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, pctrl);
|
|
|
|
dev_dbg(&pdev->dev, "Qualcomm pm8xxx mpp driver probed\n");
|
|
|
|
return 0;
|
|
|
|
unregister_gpiochip:
|
|
gpiochip_remove(&pctrl->chip);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int pm8xxx_mpp_remove(struct platform_device *pdev)
|
|
{
|
|
struct pm8xxx_mpp *pctrl = platform_get_drvdata(pdev);
|
|
|
|
gpiochip_remove(&pctrl->chip);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver pm8xxx_mpp_driver = {
|
|
.driver = {
|
|
.name = "qcom-ssbi-mpp",
|
|
.of_match_table = pm8xxx_mpp_of_match,
|
|
},
|
|
.probe = pm8xxx_mpp_probe,
|
|
.remove = pm8xxx_mpp_remove,
|
|
};
|
|
|
|
module_platform_driver(pm8xxx_mpp_driver);
|
|
|
|
MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>");
|
|
MODULE_DESCRIPTION("Qualcomm PM8xxx MPP driver");
|
|
MODULE_LICENSE("GPL v2");
|