linux/drivers/iio
Greg Kroah-Hartman c532cc617e First set of IIO fixes for the 5.7 cycle.
Includes one MAINTAINERS update to avoid people getting a lot of bounce
 messages and complaining about it.
 
 * MAINTAINERS
   - Drop Stefan Popa's Analog Devices email address in favour of
     Michael Hennerich.
 * core
   - Fix handling of dB sysfs inputs.
   - Drop a stray semi colon in macro definition.
 * ad5770r
   - Fix an off by one in chec on maximum number of channels.
 * ad7192
   - Fix a null pointer de-reference due to the name previously being
     retrieved from the spi_get_device_id call which no longer works as
     the relevant table was removed.
 * ad7797
   - Use correct attribute group.
 * counter/104-quad-8
   - Add locks to prevent some race conditions.
 * inv-mpu6050
   - Fix issues around suspend / resume clashing with runtime PM.
 * stm32-adc
   - Fix sleep in invalid context
   - Fix id relative path error in device tree binding doc.
 * st_lsm6dsx
   - Fix a read alignment issue on an untagged FIFO.
   - Handle odr for slave to properly compute the FIFO data layout / pattern.
   - Flush the HW FIFO before resettting the device to avoid a race on
     interrupt line 1.
 * st_sensors
   - Rely on ODR mask not ODR address to identify if the ODR can be set.
     Some devices have an ODR address of 0.
 * ti-ads8344
   - Byte ordering was wrong - fix it.
 * xilinx-xadc
   - Fix inverted logic in powering down the second ADC.
   - Fix clearing interrupt when enabling the trigger.
   - Fix configuration of sequencer when in simultaneous sampling mode.
   - Limit initial sampling rate as done for runtime configured ones.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl6cgbkRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Foj/qg//c1TF2fhXEuGNua2M9PzaO+UgEkymF5lD
 R9bQPOPLXesTxmIZDIPWuIYaoFOIBrB6Kc9DvE8+7apVc0I/JFYmuXSjY1LGoBj5
 6WSrbtfAHYD5HBY/ZQq92iw+feFlctWtpp7H6Ngy2c7lQy8OKMhrHOA1NgbC++HH
 5OA5uoMD7Fo0mvAGY7/74DiJFEKG/PUUrGWSbH792Mh0EmvXgyFkWyHEXCUrS6Qo
 gbaLk8mZsTac3iwYoLk7AdYyQpEdQD/tnCHpBzHHdTdDcQuKHbknP9t/zFuEkM/e
 hAH6H/cOr+IMOkMvYe1HDRQsOwkPQppz2GnxtWAUwCV8Shkn7khOExnV17zqUfJx
 NSzX60/iZWj53cAJkp4ZW4Uf6dqEEeCvV9jzWngXsCTRz96tpwJoLDilTEStSp1r
 0d17OpFSkrPoJQR6miK+wCeoA4CcLLfGJXG1BcDpsT0qgHq/TNx7P7AX55Ip//IL
 uu7qCDzFHAct8C50r1725pthsX/69PI34F8wHQ+bSt8eBlEMc/+iDavXO7MPvNNi
 Xd/Je0c+6pV15X9lCN7RqujDjBb2yMzX9f3Omq0txc4ughYGYb3QLwAfBidjW6Wy
 fI6AgBXOdqUOlFgq0ncDUVmS73AMfb2ilvstfY+cfhLrtGIzZNwin1znSIxcesaS
 tUGD9Xk/bPc=
 =SmJy
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-5.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes for the 5.7 cycle.

Includes one MAINTAINERS update to avoid people getting a lot of bounce
messages and complaining about it.

* MAINTAINERS
  - Drop Stefan Popa's Analog Devices email address in favour of
    Michael Hennerich.
* core
  - Fix handling of dB sysfs inputs.
  - Drop a stray semi colon in macro definition.
* ad5770r
  - Fix an off by one in chec on maximum number of channels.
* ad7192
  - Fix a null pointer de-reference due to the name previously being
    retrieved from the spi_get_device_id call which no longer works as
    the relevant table was removed.
* ad7797
  - Use correct attribute group.
* counter/104-quad-8
  - Add locks to prevent some race conditions.
* inv-mpu6050
  - Fix issues around suspend / resume clashing with runtime PM.
* stm32-adc
  - Fix sleep in invalid context
  - Fix id relative path error in device tree binding doc.
* st_lsm6dsx
  - Fix a read alignment issue on an untagged FIFO.
  - Handle odr for slave to properly compute the FIFO data layout / pattern.
  - Flush the HW FIFO before resettting the device to avoid a race on
    interrupt line 1.
* st_sensors
  - Rely on ODR mask not ODR address to identify if the ODR can be set.
    Some devices have an ODR address of 0.
* ti-ads8344
  - Byte ordering was wrong - fix it.
* xilinx-xadc
  - Fix inverted logic in powering down the second ADC.
  - Fix clearing interrupt when enabling the trigger.
  - Fix configuration of sequencer when in simultaneous sampling mode.
  - Limit initial sampling rate as done for runtime configured ones.

* tag 'iio-fixes-for-5.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  MAINTAINERS: remove Stefan Popa's email
  iio: adc: ad7192: fix null pointer de-reference crash during probe
  iio: core: remove extra semi-colon from devm_iio_device_register() macro
  iio: adc: ti-ads8344: properly byte swap value
  iio: imu: inv_mpu6050: fix suspend/resume with runtime power
  iio: st_sensors: rely on odr mask to know if odr can be set
  iio: xilinx-xadc: Make sure not exceed maximum samplerate
  iio: xilinx-xadc: Fix sequencer configuration for aux channels in simultaneous mode
  iio: xilinx-xadc: Fix clearing interrupt when enabling trigger
  iio: xilinx-xadc: Fix ADC-B powerdown
  iio: dac: ad5770r: fix off-by-one check on maximum number of channels
  iio: imu: st_lsm6dsx: flush hw FIFO before resetting the device
  iio: core: Fix handling of 'dB'
  dt-bindings: iio: adc: stm32-adc: fix id relative path
  counter: 104-quad-8: Add lock guards - generic interface
  iio: imu: st_lsm6dsx: specify slave odr in slv_odr
  iio: imu: st_lsm6dsx: fix read misalignment on untagged FIFO
  iio: adc: stm32-adc: fix sleep in atomic context
  iio:ad7797: Use correct attribute_group
2020-04-20 14:07:00 +02:00
..
accel chrome platform changes for 5.7 2020-04-08 21:25:49 -07:00
adc First set of IIO fixes for the 5.7 cycle. 2020-04-20 14:07:00 +02:00
afe treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
amplifiers iio: amplifiers: ad8366: add support for HMC1119 Attenuator 2020-03-08 17:28:43 +00:00
buffer iio: buffer: rename 'read_first_n' callback to 'read' 2019-12-29 15:20:09 +00:00
chemical Merge 5.6-rc7 into staging-next 2020-03-23 08:01:20 +01:00
common First set of IIO fixes for the 5.7 cycle. 2020-04-20 14:07:00 +02:00
dac iio: dac: ad5770r: fix off-by-one check on maximum number of channels 2020-04-19 17:50:01 +01:00
dummy spi: docs: convert to ReST and add it to the kABI bookset 2019-07-31 14:13:13 -06:00
frequency iio: adf4350: Convert to use GPIO descriptor 2019-12-15 11:42:16 +00:00
gyro iio: imu: adis: Add self_test_reg variable 2020-03-08 17:28:30 +00:00
health treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174 2019-05-30 11:26:41 -07:00
humidity iio: humidity: dht11 remove TODO since it doesn't make sense 2020-01-12 11:34:15 +00:00
imu iio: imu: inv_mpu6050: fix suspend/resume with runtime power 2020-04-19 17:50:02 +01:00
light chrome platform changes for 5.7 2020-04-08 21:25:49 -07:00
magnetometer iio: magnetometer: ak8974: Fix negative raw values in sysfs 2020-02-21 11:59:46 +00:00
multiplexer treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
orientation treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 309 2019-06-05 17:37:04 +02:00
position iio: position: Add support for Azoteq IQS624/625 angle sensors 2020-03-27 08:25:59 +00:00
potentiometer iio: potentiometer: add a driver for Maxim 5432-5435 2019-08-05 14:25:08 +01:00
potentiostat iio: potentiostat: lmp9100: fix iio_triggered_buffer_{predisable,postenable} positions 2020-03-08 17:28:53 +00:00
pressure chrome platform changes for 5.7 2020-04-08 21:25:49 -07:00
proximity Merge 5.6-rc7 into staging-next 2020-03-23 08:01:20 +01:00
resolver iio: ad2s1200: Drop legacy include 2019-12-15 11:42:15 +00:00
temperature iio: temperature: Add support for Azoteq IQS620AT temperature sensor 2020-03-27 08:25:50 +00:00
trigger Merge 5.6-rc7 into staging-next 2020-03-23 08:01:20 +01:00
iio_core_trigger.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
iio_core.h iio: buffer: rename 'read_first_n' callback to 'read' 2019-12-29 15:20:09 +00:00
industrialio-buffer.c Merge 5.5-rc7 into staging-next 2020-01-22 09:05:34 +01:00
industrialio-configfs.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
industrialio-core.c First set of IIO fixes for the 5.7 cycle. 2020-04-20 14:07:00 +02:00
industrialio-event.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
industrialio-sw-device.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
industrialio-sw-trigger.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
industrialio-trigger.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
industrialio-triggered-event.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00
inkern.c Driver Core and debugfs changes for 5.3-rc1 2019-07-12 12:24:03 -07:00
Kconfig iio: position: Add support for Azoteq IQS624/625 angle sensors 2020-03-27 08:25:59 +00:00
Makefile iio: position: Add support for Azoteq IQS624/625 angle sensors 2020-03-27 08:25:59 +00:00
TODO iio: add a TODO 2020-03-08 17:28:53 +00:00