mirror of
https://github.com/torvalds/linux.git
synced 2024-12-26 04:42:12 +00:00
6cf2a73cb2
The DM support describes lots of aspects related to mapped disk partitions from the userspace PoV. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
136 lines
4.2 KiB
ReStructuredText
136 lines
4.2 KiB
ReStructuredText
================================
|
|
Device-mapper "unstriped" target
|
|
================================
|
|
|
|
Introduction
|
|
============
|
|
|
|
The device-mapper "unstriped" target provides a transparent mechanism to
|
|
unstripe a device-mapper "striped" target to access the underlying disks
|
|
without having to touch the true backing block-device. It can also be
|
|
used to unstripe a hardware RAID-0 to access backing disks.
|
|
|
|
Parameters:
|
|
<number of stripes> <chunk size> <stripe #> <dev_path> <offset>
|
|
|
|
<number of stripes>
|
|
The number of stripes in the RAID 0.
|
|
|
|
<chunk size>
|
|
The amount of 512B sectors in the chunk striping.
|
|
|
|
<dev_path>
|
|
The block device you wish to unstripe.
|
|
|
|
<stripe #>
|
|
The stripe number within the device that corresponds to physical
|
|
drive you wish to unstripe. This must be 0 indexed.
|
|
|
|
|
|
Why use this module?
|
|
====================
|
|
|
|
An example of undoing an existing dm-stripe
|
|
-------------------------------------------
|
|
|
|
This small bash script will setup 4 loop devices and use the existing
|
|
striped target to combine the 4 devices into one. It then will use
|
|
the unstriped target ontop of the striped device to access the
|
|
individual backing loop devices. We write data to the newly exposed
|
|
unstriped devices and verify the data written matches the correct
|
|
underlying device on the striped array::
|
|
|
|
#!/bin/bash
|
|
|
|
MEMBER_SIZE=$((128 * 1024 * 1024))
|
|
NUM=4
|
|
SEQ_END=$((${NUM}-1))
|
|
CHUNK=256
|
|
BS=4096
|
|
|
|
RAID_SIZE=$((${MEMBER_SIZE}*${NUM}/512))
|
|
DM_PARMS="0 ${RAID_SIZE} striped ${NUM} ${CHUNK}"
|
|
COUNT=$((${MEMBER_SIZE} / ${BS}))
|
|
|
|
for i in $(seq 0 ${SEQ_END}); do
|
|
dd if=/dev/zero of=member-${i} bs=${MEMBER_SIZE} count=1 oflag=direct
|
|
losetup /dev/loop${i} member-${i}
|
|
DM_PARMS+=" /dev/loop${i} 0"
|
|
done
|
|
|
|
echo $DM_PARMS | dmsetup create raid0
|
|
for i in $(seq 0 ${SEQ_END}); do
|
|
echo "0 1 unstriped ${NUM} ${CHUNK} ${i} /dev/mapper/raid0 0" | dmsetup create set-${i}
|
|
done;
|
|
|
|
for i in $(seq 0 ${SEQ_END}); do
|
|
dd if=/dev/urandom of=/dev/mapper/set-${i} bs=${BS} count=${COUNT} oflag=direct
|
|
diff /dev/mapper/set-${i} member-${i}
|
|
done;
|
|
|
|
for i in $(seq 0 ${SEQ_END}); do
|
|
dmsetup remove set-${i}
|
|
done
|
|
|
|
dmsetup remove raid0
|
|
|
|
for i in $(seq 0 ${SEQ_END}); do
|
|
losetup -d /dev/loop${i}
|
|
rm -f member-${i}
|
|
done
|
|
|
|
Another example
|
|
---------------
|
|
|
|
Intel NVMe drives contain two cores on the physical device.
|
|
Each core of the drive has segregated access to its LBA range.
|
|
The current LBA model has a RAID 0 128k chunk on each core, resulting
|
|
in a 256k stripe across the two cores::
|
|
|
|
Core 0: Core 1:
|
|
__________ __________
|
|
| LBA 512| | LBA 768|
|
|
| LBA 0 | | LBA 256|
|
|
---------- ----------
|
|
|
|
The purpose of this unstriping is to provide better QoS in noisy
|
|
neighbor environments. When two partitions are created on the
|
|
aggregate drive without this unstriping, reads on one partition
|
|
can affect writes on another partition. This is because the partitions
|
|
are striped across the two cores. When we unstripe this hardware RAID 0
|
|
and make partitions on each new exposed device the two partitions are now
|
|
physically separated.
|
|
|
|
With the dm-unstriped target we're able to segregate an fio script that
|
|
has read and write jobs that are independent of each other. Compared to
|
|
when we run the test on a combined drive with partitions, we were able
|
|
to get a 92% reduction in read latency using this device mapper target.
|
|
|
|
|
|
Example dmsetup usage
|
|
=====================
|
|
|
|
unstriped ontop of Intel NVMe device that has 2 cores
|
|
-----------------------------------------------------
|
|
|
|
::
|
|
|
|
dmsetup create nvmset0 --table '0 512 unstriped 2 256 0 /dev/nvme0n1 0'
|
|
dmsetup create nvmset1 --table '0 512 unstriped 2 256 1 /dev/nvme0n1 0'
|
|
|
|
There will now be two devices that expose Intel NVMe core 0 and 1
|
|
respectively::
|
|
|
|
/dev/mapper/nvmset0
|
|
/dev/mapper/nvmset1
|
|
|
|
unstriped ontop of striped with 4 drives using 128K chunk size
|
|
--------------------------------------------------------------
|
|
|
|
::
|
|
|
|
dmsetup create raid_disk0 --table '0 512 unstriped 4 256 0 /dev/mapper/striped 0'
|
|
dmsetup create raid_disk1 --table '0 512 unstriped 4 256 1 /dev/mapper/striped 0'
|
|
dmsetup create raid_disk2 --table '0 512 unstriped 4 256 2 /dev/mapper/striped 0'
|
|
dmsetup create raid_disk3 --table '0 512 unstriped 4 256 3 /dev/mapper/striped 0'
|