mirror of
https://github.com/torvalds/linux.git
synced 2024-11-07 20:51:47 +00:00
c574fa93af
mx53qsb uses GPIO7_8 to turn on VBUS, so add support for it. Also specify the PHY type in the device tree. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
323 lines
6.4 KiB
Plaintext
323 lines
6.4 KiB
Plaintext
/*
|
|
* Copyright 2011 Freescale Semiconductor, Inc.
|
|
* Copyright 2011 Linaro Ltd.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "imx53.dtsi"
|
|
|
|
/ {
|
|
model = "Freescale i.MX53 Quick Start Board";
|
|
compatible = "fsl,imx53-qsb", "fsl,imx53";
|
|
|
|
memory {
|
|
reg = <0x70000000 0x40000000>;
|
|
};
|
|
|
|
display@di0 {
|
|
compatible = "fsl,imx-parallel-display";
|
|
crtcs = <&ipu 0>;
|
|
interface-pix-fmt = "rgb565";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ipu_disp0_1>;
|
|
status = "disabled";
|
|
display-timings {
|
|
claawvga {
|
|
native-mode;
|
|
clock-frequency = <27000000>;
|
|
hactive = <800>;
|
|
vactive = <480>;
|
|
hback-porch = <40>;
|
|
hfront-porch = <60>;
|
|
vback-porch = <10>;
|
|
vfront-porch = <10>;
|
|
hsync-len = <20>;
|
|
vsync-len = <10>;
|
|
hsync-active = <0>;
|
|
vsync-active = <0>;
|
|
de-active = <1>;
|
|
pixelclk-active = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
power {
|
|
label = "Power Button";
|
|
gpios = <&gpio1 8 0>;
|
|
linux,code = <116>; /* KEY_POWER */
|
|
gpio-key,wakeup;
|
|
};
|
|
|
|
volume-up {
|
|
label = "Volume Up";
|
|
gpios = <&gpio2 14 0>;
|
|
linux,code = <115>; /* KEY_VOLUMEUP */
|
|
};
|
|
|
|
volume-down {
|
|
label = "Volume Down";
|
|
gpios = <&gpio2 15 0>;
|
|
linux,code = <114>; /* KEY_VOLUMEDOWN */
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&led_pin_gpio7_7>;
|
|
|
|
user {
|
|
label = "Heartbeat";
|
|
gpios = <&gpio7 7 0>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
|
|
reg_3p2v: 3p2v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3P2V";
|
|
regulator-min-microvolt = <3200000>;
|
|
regulator-max-microvolt = <3200000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_usb_vbus: usb_vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usb_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio7 8 0>;
|
|
enable-active-high;
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "fsl,imx53-qsb-sgtl5000",
|
|
"fsl,imx-audio-sgtl5000";
|
|
model = "imx53-qsb-sgtl5000";
|
|
ssi-controller = <&ssi2>;
|
|
audio-codec = <&sgtl5000>;
|
|
audio-routing =
|
|
"MIC_IN", "Mic Jack",
|
|
"Mic Jack", "Mic Bias",
|
|
"Headphone Jack", "HP_OUT";
|
|
mux-int-port = <2>;
|
|
mux-ext-port = <5>;
|
|
};
|
|
};
|
|
|
|
&esdhc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_esdhc1_1>;
|
|
cd-gpios = <&gpio3 13 0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ssi2 {
|
|
fsl,mode = "i2s-slave";
|
|
status = "okay";
|
|
};
|
|
|
|
&esdhc3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_esdhc3_1>;
|
|
cd-gpios = <&gpio3 11 0>;
|
|
wp-gpios = <&gpio3 12 0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hog>;
|
|
|
|
hog {
|
|
pinctrl_hog: hoggrp {
|
|
fsl,pins = <
|
|
MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
|
|
MX53_PAD_GPIO_8__GPIO1_8 0x80000000
|
|
MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
|
|
MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
|
|
MX53_PAD_EIM_DA11__GPIO3_11 0x80000000
|
|
MX53_PAD_EIM_DA12__GPIO3_12 0x80000000
|
|
MX53_PAD_EIM_DA13__GPIO3_13 0x80000000
|
|
MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
|
|
MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000
|
|
MX53_PAD_GPIO_16__GPIO7_11 0x80000000
|
|
>;
|
|
};
|
|
|
|
led_pin_gpio7_7: led_gpio7_7@0 {
|
|
fsl,pins = <
|
|
MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
|
|
>;
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1_1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2_1>;
|
|
status = "okay";
|
|
|
|
sgtl5000: codec@0a {
|
|
compatible = "fsl,sgtl5000";
|
|
reg = <0x0a>;
|
|
VDDA-supply = <®_3p2v>;
|
|
VDDIO-supply = <®_3p2v>;
|
|
clocks = <&clks 150>;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1_1>;
|
|
status = "okay";
|
|
|
|
accelerometer: mma8450@1c {
|
|
compatible = "fsl,mma8450";
|
|
reg = <0x1c>;
|
|
};
|
|
|
|
pmic: dialog@48 {
|
|
compatible = "dlg,da9053-aa", "dlg,da9052";
|
|
reg = <0x48>;
|
|
interrupt-parent = <&gpio7>;
|
|
interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
|
|
|
|
regulators {
|
|
buck1_reg: buck1 {
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <2075000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck2_reg: buck2 {
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <2075000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck3_reg: buck3 {
|
|
regulator-min-microvolt = <925000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck4_reg: buck4 {
|
|
regulator-min-microvolt = <925000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo1_reg: ldo1 {
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo2_reg: ldo2 {
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo3_reg: ldo3 {
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo4_reg: ldo4 {
|
|
regulator-min-microvolt = <1725000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo5_reg: ldo5 {
|
|
regulator-min-microvolt = <1725000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo6_reg: ldo6 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <3600000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo7_reg: ldo7 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <3600000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo8_reg: ldo8 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <3600000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo9_reg: ldo9 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <3600000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo10_reg: ldo10 {
|
|
regulator-min-microvolt = <1250000>;
|
|
regulator-max-microvolt = <3650000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&audmux {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_audmux_1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&fec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_fec_1>;
|
|
phy-mode = "rmii";
|
|
phy-reset-gpios = <&gpio7 6 0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&vpu {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh1 {
|
|
vbus-supply = <®_usb_vbus>;
|
|
phy_type = "utmi";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg {
|
|
status = "okay";
|
|
};
|