mirror of
https://github.com/torvalds/linux.git
synced 2024-12-29 14:21:47 +00:00
9cbd72e577
This patch adds the document for DSPI driver under Documentation/devicetree/bindings/spi/. Signed-off-by: Chao Fu <b44548@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
43 lines
1.1 KiB
Plaintext
43 lines
1.1 KiB
Plaintext
ARM Freescale DSPI controller
|
|
|
|
Required properties:
|
|
- compatible : "fsl,vf610-dspi"
|
|
- reg : Offset and length of the register set for the device
|
|
- interrupts : Should contain SPI controller interrupt
|
|
- clocks: from common clock binding: handle to dspi clock.
|
|
- clock-names: from common clock binding: Shall be "dspi".
|
|
- pinctrl-0: pin control group to be used for this controller.
|
|
- pinctrl-names: must contain a "default" entry.
|
|
- spi-num-chipselects : the number of the chipselect signals.
|
|
- bus-num : the slave chip chipselect signal number.
|
|
Example:
|
|
|
|
dspi0@4002c000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,vf610-dspi";
|
|
reg = <0x4002c000 0x1000>;
|
|
interrupts = <0 67 0x04>;
|
|
clocks = <&clks VF610_CLK_DSPI0>;
|
|
clock-names = "dspi";
|
|
spi-num-chipselects = <5>;
|
|
bus-num = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_dspi0_1>;
|
|
status = "okay";
|
|
|
|
sflash: at26df081a@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "atmel,at26df081a";
|
|
spi-max-frequency = <16000000>;
|
|
spi-cpol;
|
|
spi-cpha;
|
|
reg = <0>;
|
|
linux,modalias = "m25p80";
|
|
modal = "at26df081a";
|
|
};
|
|
};
|
|
|
|
|