mirror of
https://github.com/torvalds/linux.git
synced 2024-12-14 23:25:54 +00:00
3f9c37a0c9
Add support for the I2C controller found on several NXP devices including LPC2xxx, LPC178x/7x and LPC18xx/43xx. The controller is implemented as a state machine and the driver act upon the state changes when the bus is accessed. The I2C controller supports master/slave operation, bus arbitration, programmable clock rate, and speeds up to 1 Mbit/s. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
34 lines
751 B
Plaintext
34 lines
751 B
Plaintext
NXP I2C controller for LPC2xxx/178x/18xx/43xx
|
|
|
|
Required properties:
|
|
- compatible: must be "nxp,lpc1788-i2c"
|
|
- reg: physical address and length of the device registers
|
|
- interrupts: a single interrupt specifier
|
|
- clocks: clock for the device
|
|
- #address-cells: should be <1>
|
|
- #size-cells: should be <0>
|
|
|
|
Optional properties:
|
|
- clock-frequency: the desired I2C bus clock frequency in Hz; in
|
|
absence of this property the default value is used (100 kHz).
|
|
|
|
Example:
|
|
i2c0: i2c@400a1000 {
|
|
compatible = "nxp,lpc1788-i2c";
|
|
reg = <0x400a1000 0x1000>;
|
|
interrupts = <18>;
|
|
clocks = <&ccu1 CLK_APB1_I2C0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
&i2c0 {
|
|
clock-frequency = <400000>;
|
|
|
|
lm75@48 {
|
|
compatible = "nxp,lm75";
|
|
reg = <0x48>;
|
|
};
|
|
};
|
|
|