mirror of
https://github.com/torvalds/linux.git
synced 2024-12-12 14:12:51 +00:00
6b0e34a030
framework that simplifies a runtime PM call. Otherwise the majority of the diff
falls to a few SoC drivers: Qualcomm, STM32 and MediaTek. Those SoCs gain some
new hardware support and what comes along with that is quite a few lines of
data and some clk_ops code. Beyond the new hardware support we have the usual
pile of driver updates that add missing clks on already supported SoCs or fix
up problems like bad clk tree descriptions. It's nice to see that more drivers
are moving to clk_hw based APIs too.
New Drivers:
- Add STM32MP13 RCC driver (Reset Clock Controller)
- MediaTek MT8186 SoC clk support
- Airoha EN7523 SoC system clocks
- Clock driver for exynosautov9 SoC
- Renesas R-Car V4H and RZ/V2M SoCs
- Renesas RZ/G2UL SoC
- LPASS clk driver for Qualcomm sc7280 SoC
- GCC clk driver for Qualcomm SC8280XP SoC
Updates:
- SDCC uses floor clk ops on Qualcomm MSM8976
- Add modem reset and fix RPM clks on Qualcomm MSM8976
- Add the two missing CLKOUT clocks for U8500/DB8500 SoC
- Mark some clks critical on Ingenic X1000
- Convert ux500 to clk_hw
- Move MediaTek driver to clk_hw provider APIs
- Use i2c driver probe_new to avoid id scans
- Convert a number of Rockchip dt bindings to YAML
- Mark hclk_vo critical on Rockchip rk3568
- Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
- Various cleanups like memory allocation error checks and plugged leaks
- Allwinner H6 RTC clock support
- Allwinner H616 32 kHz clock support
- Add the Universal Flash Storage clock on Renesas R-Car S4-8
- Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi
I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on Renesas RZ/G2UL
- Add display clock support on Renesas RZ/G2L
- Add RPC (QSPI/HyperFlash) clocks on Renesas R-Car E3 and D3
- Add 27 MHz phy PLL ref clock on i.MX
- Add mcore_booted module parameter to tell kernel M core has already booted
for i.MX
- Remove snvs clock on i.MX because it was for secure world only
- Add dt bindings for i.MX8MN GPT
- Add DISP2 pixel clock for i.MX8MP
- Add clkout1/2 for i.MX8MP
- Fix parent clock of ubs_root_clk for i.MX8MP
- Implement better RCG parking on Qualcomm SoCs using the shared RCG clk ops
- Kerneldoc fixes
- Switch Tegra BPMP to determine_rate clk op
- Add a pointer to dt schema for generic clock bindings
-----BEGIN PGP SIGNATURE-----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=7lBA
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Mainly driver updates this time around.
There's a single patch to the core clk framework that simplifies a
runtime PM call. Otherwise the majority of the diff falls to a few SoC
drivers: Qualcomm, STM32 and MediaTek. Those SoCs gain some new
hardware support and what comes along with that is quite a few lines
of data and some clk_ops code.
Beyond the new hardware support we have the usual pile of driver
updates that add missing clks on already supported SoCs or fix up
problems like bad clk tree descriptions. It's nice to see that more
drivers are moving to clk_hw based APIs too.
New Drivers:
- Add STM32MP13 RCC driver (Reset Clock Controller)
- MediaTek MT8186 SoC clk support
- Airoha EN7523 SoC system clocks
- Clock driver for exynosautov9 SoC
- Renesas R-Car V4H and RZ/V2M SoCs
- Renesas RZ/G2UL SoC
- LPASS clk driver for Qualcomm sc7280 SoC
- GCC clk driver for Qualcomm SC8280XP SoC
Updates:
- SDCC uses floor clk ops on Qualcomm MSM8976
- Add modem reset and fix RPM clks on Qualcomm MSM8976
- Add the two missing CLKOUT clocks for U8500/DB8500 SoC
- Mark some clks critical on Ingenic X1000
- Convert ux500 to clk_hw
- Move MediaTek driver to clk_hw provider APIs
- Use i2c driver probe_new to avoid id scans
- Convert a number of Rockchip dt bindings to YAML
- Mark hclk_vo critical on Rockchip rk3568
- Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
- Various cleanups like memory allocation error checks and plugged
leaks
- Allwinner H6 RTC clock support
- Allwinner H616 32 kHz clock support
- Add the Universal Flash Storage clock on Renesas R-Car S4-8
- Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi
I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on Renesas
RZ/G2UL
- Add display clock support on Renesas RZ/G2L
- Add RPC (QSPI/HyperFlash) clocks on Renesas R-Car E3 and D3
- Add 27 MHz phy PLL ref clock on i.MX
- Add mcore_booted module parameter to tell kernel M core has already
booted for i.MX
- Remove snvs clock on i.MX because it was for secure world only
- Add dt bindings for i.MX8MN GPT
- Add DISP2 pixel clock for i.MX8MP
- Add clkout1/2 for i.MX8MP
- Fix parent clock of ubs_root_clk for i.MX8MP
- Implement better RCG parking on Qualcomm SoCs using the shared RCG
clk ops
- Kerneldoc fixes
- Switch Tegra BPMP to determine_rate clk op
- Add a pointer to dt schema for generic clock bindings"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (168 commits)
Revert "clk: qcom: regmap-mux: add pipe clk implementation"
Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc()
clk: stm32mp13: add safe mux management
clk: stm32mp13: add multi mux function
clk: stm32mp13: add all STM32MP13 kernel clocks
clk: stm32mp13: add all STM32MP13 peripheral clocks
clk: stm32mp13: manage secured clocks
clk: stm32mp13: add composite clock
clk: stm32mp13: add stm32 divider clock
clk: stm32mp13: add stm32_gate management
clk: stm32mp13: add stm32_mux clock management
clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller)
dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC
clk: ti: clkctrl: replace usage of found with dedicated list iterator variable
clk: ti: composite: Prefer kcalloc over open coded arithmetic
dt-bindings: clock: exynosautov9: correct count of NR_CLK
clk: mediatek: mt8173: Switch to clk_hw provider APIs
clk: mediatek: Switch to clk_hw provider APIs
...
134 lines
5.2 KiB
Makefile
134 lines
5.2 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
# common clock types
|
|
obj-$(CONFIG_HAVE_CLK) += clk-devres.o clk-bulk.o clkdev.o
|
|
obj-$(CONFIG_COMMON_CLK) += clk.o
|
|
obj-$(CONFIG_CLK_KUNIT_TEST) += clk_test.o
|
|
obj-$(CONFIG_COMMON_CLK) += clk-divider.o
|
|
obj-$(CONFIG_COMMON_CLK) += clk-fixed-factor.o
|
|
obj-$(CONFIG_COMMON_CLK) += clk-fixed-rate.o
|
|
obj-$(CONFIG_COMMON_CLK) += clk-gate.o
|
|
obj-$(CONFIG_CLK_GATE_KUNIT_TEST) += clk-gate_test.o
|
|
obj-$(CONFIG_COMMON_CLK) += clk-multiplier.o
|
|
obj-$(CONFIG_COMMON_CLK) += clk-mux.o
|
|
obj-$(CONFIG_COMMON_CLK) += clk-composite.o
|
|
obj-$(CONFIG_COMMON_CLK) += clk-fractional-divider.o
|
|
obj-$(CONFIG_COMMON_CLK) += clk-gpio.o
|
|
ifeq ($(CONFIG_OF), y)
|
|
obj-$(CONFIG_COMMON_CLK) += clk-conf.o
|
|
endif
|
|
|
|
# hardware specific clock types
|
|
# please keep this section sorted lexicographically by file path name
|
|
obj-$(CONFIG_COMMON_CLK_APPLE_NCO) += clk-apple-nco.o
|
|
obj-$(CONFIG_MACH_ASM9260) += clk-asm9260.o
|
|
obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o
|
|
obj-$(CONFIG_ARCH_AXXIA) += clk-axm5516.o
|
|
obj-$(CONFIG_COMMON_CLK_BD718XX) += clk-bd718x7.o
|
|
obj-$(CONFIG_COMMON_CLK_BM1880) += clk-bm1880.o
|
|
obj-$(CONFIG_COMMON_CLK_CDCE706) += clk-cdce706.o
|
|
obj-$(CONFIG_COMMON_CLK_CDCE925) += clk-cdce925.o
|
|
obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
|
|
obj-$(CONFIG_COMMON_CLK_CS2000_CP) += clk-cs2000-cp.o
|
|
obj-$(CONFIG_ARCH_SPARX5) += clk-sparx5.o
|
|
obj-$(CONFIG_COMMON_CLK_EN7523) += clk-en7523.o
|
|
obj-$(CONFIG_COMMON_CLK_FIXED_MMIO) += clk-fixed-mmio.o
|
|
obj-$(CONFIG_COMMON_CLK_FSL_FLEXSPI) += clk-fsl-flexspi.o
|
|
obj-$(CONFIG_COMMON_CLK_FSL_SAI) += clk-fsl-sai.o
|
|
obj-$(CONFIG_COMMON_CLK_GEMINI) += clk-gemini.o
|
|
obj-$(CONFIG_COMMON_CLK_ASPEED) += clk-aspeed.o
|
|
obj-$(CONFIG_MACH_ASPEED_G6) += clk-ast2600.o
|
|
obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
|
|
obj-$(CONFIG_CLK_HSDK) += clk-hsdk-pll.o
|
|
obj-$(CONFIG_COMMON_CLK_K210) += clk-k210.o
|
|
obj-$(CONFIG_LMK04832) += clk-lmk04832.o
|
|
obj-$(CONFIG_COMMON_CLK_LAN966X) += clk-lan966x.o
|
|
obj-$(CONFIG_COMMON_CLK_LOCHNAGAR) += clk-lochnagar.o
|
|
obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
|
|
obj-$(CONFIG_COMMON_CLK_MAX9485) += clk-max9485.o
|
|
obj-$(CONFIG_ARCH_MILBEAUT_M10V) += clk-milbeaut.o
|
|
obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o
|
|
obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o
|
|
obj-$(CONFIG_ARCH_NPCM7XX) += clk-npcm7xx.o
|
|
obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o
|
|
obj-$(CONFIG_COMMON_CLK_OXNAS) += clk-oxnas.o
|
|
obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o
|
|
obj-$(CONFIG_CLK_LS1028A_PLLDIG) += clk-plldig.o
|
|
obj-$(CONFIG_COMMON_CLK_PWM) += clk-pwm.o
|
|
obj-$(CONFIG_CLK_QORIQ) += clk-qoriq.o
|
|
obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o
|
|
obj-$(CONFIG_COMMON_CLK_HI655X) += clk-hi655x.o
|
|
obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o
|
|
obj-$(CONFIG_COMMON_CLK_SCMI) += clk-scmi.o
|
|
obj-$(CONFIG_COMMON_CLK_SCPI) += clk-scpi.o
|
|
obj-$(CONFIG_COMMON_CLK_SI5341) += clk-si5341.o
|
|
obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o
|
|
obj-$(CONFIG_COMMON_CLK_SI514) += clk-si514.o
|
|
obj-$(CONFIG_COMMON_CLK_SI544) += clk-si544.o
|
|
obj-$(CONFIG_COMMON_CLK_SI570) += clk-si570.o
|
|
obj-$(CONFIG_COMMON_CLK_STM32F) += clk-stm32f4.o
|
|
obj-$(CONFIG_COMMON_CLK_STM32H7) += clk-stm32h7.o
|
|
obj-$(CONFIG_COMMON_CLK_STM32MP157) += clk-stm32mp1.o
|
|
obj-$(CONFIG_COMMON_CLK_TPS68470) += clk-tps68470.o
|
|
obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o
|
|
obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
|
|
obj-$(CONFIG_COMMON_CLK_RS9_PCIE) += clk-renesas-pcie.o
|
|
obj-$(CONFIG_COMMON_CLK_VC5) += clk-versaclock5.o
|
|
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
|
|
obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o
|
|
|
|
# please keep this section sorted lexicographically by directory path name
|
|
obj-y += actions/
|
|
obj-y += analogbits/
|
|
obj-$(CONFIG_COMMON_CLK_AT91) += at91/
|
|
obj-$(CONFIG_ARCH_ARTPEC) += axis/
|
|
obj-$(CONFIG_ARC_PLAT_AXS10X) += axs10x/
|
|
obj-$(CONFIG_CLK_BAIKAL_T1) += baikal-t1/
|
|
obj-y += bcm/
|
|
obj-$(CONFIG_ARCH_BERLIN) += berlin/
|
|
obj-$(CONFIG_ARCH_DAVINCI) += davinci/
|
|
obj-$(CONFIG_ARCH_HISI) += hisilicon/
|
|
obj-y += imgtec/
|
|
obj-y += imx/
|
|
obj-y += ingenic/
|
|
obj-$(CONFIG_ARCH_K3) += keystone/
|
|
obj-$(CONFIG_ARCH_KEYSTONE) += keystone/
|
|
obj-$(CONFIG_MACH_LOONGSON32) += loongson1/
|
|
obj-y += mediatek/
|
|
obj-$(CONFIG_ARCH_MESON) += meson/
|
|
obj-y += microchip/
|
|
ifeq ($(CONFIG_COMMON_CLK), y)
|
|
obj-$(CONFIG_ARCH_MMP) += mmp/
|
|
endif
|
|
obj-y += mstar/
|
|
obj-y += mvebu/
|
|
obj-$(CONFIG_ARCH_MXS) += mxs/
|
|
obj-$(CONFIG_COMMON_CLK_NXP) += nxp/
|
|
obj-$(CONFIG_COMMON_CLK_PISTACHIO) += pistachio/
|
|
obj-$(CONFIG_COMMON_CLK_PXA) += pxa/
|
|
obj-$(CONFIG_COMMON_CLK_QCOM) += qcom/
|
|
obj-y += ralink/
|
|
obj-y += renesas/
|
|
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
|
|
obj-$(CONFIG_COMMON_CLK_SAMSUNG) += samsung/
|
|
obj-$(CONFIG_CLK_SIFIVE) += sifive/
|
|
obj-y += socfpga/
|
|
obj-$(CONFIG_PLAT_SPEAR) += spear/
|
|
obj-y += sprd/
|
|
obj-$(CONFIG_ARCH_STI) += st/
|
|
obj-$(CONFIG_ARCH_STM32) += stm32/
|
|
obj-$(CONFIG_SOC_STARFIVE) += starfive/
|
|
obj-$(CONFIG_ARCH_SUNXI) += sunxi/
|
|
obj-y += sunxi-ng/
|
|
obj-$(CONFIG_ARCH_TEGRA) += tegra/
|
|
obj-y += ti/
|
|
obj-$(CONFIG_CLK_UNIPHIER) += uniphier/
|
|
obj-$(CONFIG_ARCH_U8500) += ux500/
|
|
obj-y += versatile/
|
|
obj-$(CONFIG_COMMON_CLK_VISCONTI) += visconti/
|
|
ifeq ($(CONFIG_COMMON_CLK), y)
|
|
obj-$(CONFIG_X86) += x86/
|
|
endif
|
|
obj-y += xilinx/
|
|
obj-$(CONFIG_ARCH_ZYNQ) += zynq/
|
|
obj-$(CONFIG_COMMON_CLK_ZYNQMP) += zynqmp/
|