mirror of
https://github.com/torvalds/linux.git
synced 2024-12-21 02:21:36 +00:00
3a3c72d69b
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
1962 lines
43 KiB
C
1962 lines
43 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Montage Technology M88DS3103/M88RS6000 demodulator driver
|
|
*
|
|
* Copyright (C) 2013 Antti Palosaari <crope@iki.fi>
|
|
*/
|
|
|
|
#include "m88ds3103_priv.h"
|
|
|
|
static const struct dvb_frontend_ops m88ds3103_ops;
|
|
|
|
/* write single register with mask */
|
|
static int m88ds3103_update_bits(struct m88ds3103_dev *dev,
|
|
u8 reg, u8 mask, u8 val)
|
|
{
|
|
int ret;
|
|
u8 tmp;
|
|
|
|
/* no need for read if whole reg is written */
|
|
if (mask != 0xff) {
|
|
ret = regmap_bulk_read(dev->regmap, reg, &tmp, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val &= mask;
|
|
tmp &= ~mask;
|
|
val |= tmp;
|
|
}
|
|
|
|
return regmap_bulk_write(dev->regmap, reg, &val, 1);
|
|
}
|
|
|
|
/* write reg val table using reg addr auto increment */
|
|
static int m88ds3103_wr_reg_val_tab(struct m88ds3103_dev *dev,
|
|
const struct m88ds3103_reg_val *tab, int tab_len)
|
|
{
|
|
struct i2c_client *client = dev->client;
|
|
int ret, i, j;
|
|
u8 buf[83];
|
|
|
|
dev_dbg(&client->dev, "tab_len=%d\n", tab_len);
|
|
|
|
if (tab_len > 86) {
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
for (i = 0, j = 0; i < tab_len; i++, j++) {
|
|
buf[j] = tab[i].val;
|
|
|
|
if (i == tab_len - 1 || tab[i].reg != tab[i + 1].reg - 1 ||
|
|
!((j + 1) % (dev->cfg->i2c_wr_max - 1))) {
|
|
ret = regmap_bulk_write(dev->regmap, tab[i].reg - j, buf, j + 1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
j = -1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* m88ds3103b demod has an internal device related to clocking. First the i2c
|
|
* gate must be opened, for one transaction, then writes will be allowed.
|
|
*/
|
|
static int m88ds3103b_dt_write(struct m88ds3103_dev *dev, int reg, int data)
|
|
{
|
|
struct i2c_client *client = dev->client;
|
|
u8 buf[] = {reg, data};
|
|
u8 val;
|
|
int ret;
|
|
struct i2c_msg msg = {
|
|
.addr = dev->dt_addr, .flags = 0, .buf = buf, .len = 2
|
|
};
|
|
|
|
m88ds3103_update_bits(dev, 0x11, 0x01, 0x00);
|
|
|
|
val = 0x11;
|
|
ret = regmap_write(dev->regmap, 0x03, val);
|
|
if (ret)
|
|
dev_dbg(&client->dev, "fail=%d\n", ret);
|
|
|
|
ret = i2c_transfer(dev->dt_client->adapter, &msg, 1);
|
|
if (ret != 1) {
|
|
dev_err(&client->dev, "0x%02x (ret=%i, reg=0x%02x, value=0x%02x)\n",
|
|
dev->dt_addr, ret, reg, data);
|
|
|
|
m88ds3103_update_bits(dev, 0x11, 0x01, 0x01);
|
|
return -EREMOTEIO;
|
|
}
|
|
m88ds3103_update_bits(dev, 0x11, 0x01, 0x01);
|
|
|
|
dev_dbg(&client->dev, "0x%02x reg 0x%02x, value 0x%02x\n",
|
|
dev->dt_addr, reg, data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* m88ds3103b demod has an internal device related to clocking. First the i2c
|
|
* gate must be opened, for two transactions, then reads will be allowed.
|
|
*/
|
|
static int m88ds3103b_dt_read(struct m88ds3103_dev *dev, u8 reg)
|
|
{
|
|
struct i2c_client *client = dev->client;
|
|
int ret;
|
|
u8 val;
|
|
u8 b0[] = { reg };
|
|
u8 b1[] = { 0 };
|
|
struct i2c_msg msg[] = {
|
|
{
|
|
.addr = dev->dt_addr,
|
|
.flags = 0,
|
|
.buf = b0,
|
|
.len = 1
|
|
},
|
|
{
|
|
.addr = dev->dt_addr,
|
|
.flags = I2C_M_RD,
|
|
.buf = b1,
|
|
.len = 1
|
|
}
|
|
};
|
|
|
|
m88ds3103_update_bits(dev, 0x11, 0x01, 0x00);
|
|
|
|
val = 0x12;
|
|
ret = regmap_write(dev->regmap, 0x03, val);
|
|
if (ret)
|
|
dev_dbg(&client->dev, "fail=%d\n", ret);
|
|
|
|
ret = i2c_transfer(dev->dt_client->adapter, msg, 2);
|
|
if (ret != 2) {
|
|
dev_err(&client->dev, "0x%02x (ret=%d, reg=0x%02x)\n",
|
|
dev->dt_addr, ret, reg);
|
|
|
|
m88ds3103_update_bits(dev, 0x11, 0x01, 0x01);
|
|
return -EREMOTEIO;
|
|
}
|
|
m88ds3103_update_bits(dev, 0x11, 0x01, 0x01);
|
|
|
|
dev_dbg(&client->dev, "0x%02x reg 0x%02x, value 0x%02x\n",
|
|
dev->dt_addr, reg, b1[0]);
|
|
|
|
return b1[0];
|
|
}
|
|
|
|
/*
|
|
* Get the demodulator AGC PWM voltage setting supplied to the tuner.
|
|
*/
|
|
int m88ds3103_get_agc_pwm(struct dvb_frontend *fe, u8 *_agc_pwm)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
unsigned tmp;
|
|
int ret;
|
|
|
|
ret = regmap_read(dev->regmap, 0x3f, &tmp);
|
|
if (ret == 0)
|
|
*_agc_pwm = tmp;
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(m88ds3103_get_agc_pwm);
|
|
|
|
static int m88ds3103_read_status(struct dvb_frontend *fe,
|
|
enum fe_status *status)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
struct i2c_client *client = dev->client;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int ret, i, itmp;
|
|
unsigned int utmp;
|
|
u8 buf[3];
|
|
|
|
*status = 0;
|
|
|
|
if (!dev->warm) {
|
|
ret = -EAGAIN;
|
|
goto err;
|
|
}
|
|
|
|
switch (c->delivery_system) {
|
|
case SYS_DVBS:
|
|
ret = regmap_read(dev->regmap, 0xd1, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if ((utmp & 0x07) == 0x07)
|
|
*status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
|
FE_HAS_VITERBI | FE_HAS_SYNC |
|
|
FE_HAS_LOCK;
|
|
break;
|
|
case SYS_DVBS2:
|
|
ret = regmap_read(dev->regmap, 0x0d, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if ((utmp & 0x8f) == 0x8f)
|
|
*status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
|
FE_HAS_VITERBI | FE_HAS_SYNC |
|
|
FE_HAS_LOCK;
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid delivery_system\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
dev->fe_status = *status;
|
|
dev_dbg(&client->dev, "lock=%02x status=%02x\n", utmp, *status);
|
|
|
|
/* CNR */
|
|
if (dev->fe_status & FE_HAS_VITERBI) {
|
|
unsigned int cnr, noise, signal, noise_tot, signal_tot;
|
|
|
|
cnr = 0;
|
|
/* more iterations for more accurate estimation */
|
|
#define M88DS3103_SNR_ITERATIONS 3
|
|
|
|
switch (c->delivery_system) {
|
|
case SYS_DVBS:
|
|
itmp = 0;
|
|
|
|
for (i = 0; i < M88DS3103_SNR_ITERATIONS; i++) {
|
|
ret = regmap_read(dev->regmap, 0xff, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
itmp += utmp;
|
|
}
|
|
|
|
/* use of single register limits max value to 15 dB */
|
|
/* SNR(X) dB = 10 * ln(X) / ln(10) dB */
|
|
itmp = DIV_ROUND_CLOSEST(itmp, 8 * M88DS3103_SNR_ITERATIONS);
|
|
if (itmp)
|
|
cnr = div_u64((u64) 10000 * intlog2(itmp), intlog2(10));
|
|
break;
|
|
case SYS_DVBS2:
|
|
noise_tot = 0;
|
|
signal_tot = 0;
|
|
|
|
for (i = 0; i < M88DS3103_SNR_ITERATIONS; i++) {
|
|
ret = regmap_bulk_read(dev->regmap, 0x8c, buf, 3);
|
|
if (ret)
|
|
goto err;
|
|
|
|
noise = buf[1] << 6; /* [13:6] */
|
|
noise |= buf[0] & 0x3f; /* [5:0] */
|
|
noise >>= 2;
|
|
signal = buf[2] * buf[2];
|
|
signal >>= 1;
|
|
|
|
noise_tot += noise;
|
|
signal_tot += signal;
|
|
}
|
|
|
|
noise = noise_tot / M88DS3103_SNR_ITERATIONS;
|
|
signal = signal_tot / M88DS3103_SNR_ITERATIONS;
|
|
|
|
/* SNR(X) dB = 10 * log10(X) dB */
|
|
if (signal > noise) {
|
|
itmp = signal / noise;
|
|
cnr = div_u64((u64) 10000 * intlog10(itmp), (1 << 24));
|
|
}
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid delivery_system\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
if (cnr) {
|
|
c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
|
|
c->cnr.stat[0].svalue = cnr;
|
|
} else {
|
|
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
}
|
|
} else {
|
|
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
}
|
|
|
|
/* BER */
|
|
if (dev->fe_status & FE_HAS_LOCK) {
|
|
unsigned int utmp, post_bit_error, post_bit_count;
|
|
|
|
switch (c->delivery_system) {
|
|
case SYS_DVBS:
|
|
ret = regmap_write(dev->regmap, 0xf9, 0x04);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_read(dev->regmap, 0xf8, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* measurement ready? */
|
|
if (!(utmp & 0x10)) {
|
|
ret = regmap_bulk_read(dev->regmap, 0xf6, buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
post_bit_error = buf[1] << 8 | buf[0] << 0;
|
|
post_bit_count = 0x800000;
|
|
dev->post_bit_error += post_bit_error;
|
|
dev->post_bit_count += post_bit_count;
|
|
dev->dvbv3_ber = post_bit_error;
|
|
|
|
/* restart measurement */
|
|
utmp |= 0x10;
|
|
ret = regmap_write(dev->regmap, 0xf8, utmp);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
break;
|
|
case SYS_DVBS2:
|
|
ret = regmap_bulk_read(dev->regmap, 0xd5, buf, 3);
|
|
if (ret)
|
|
goto err;
|
|
|
|
utmp = buf[2] << 16 | buf[1] << 8 | buf[0] << 0;
|
|
|
|
/* enough data? */
|
|
if (utmp > 4000) {
|
|
ret = regmap_bulk_read(dev->regmap, 0xf7, buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
post_bit_error = buf[1] << 8 | buf[0] << 0;
|
|
post_bit_count = 32 * utmp; /* TODO: FEC */
|
|
dev->post_bit_error += post_bit_error;
|
|
dev->post_bit_count += post_bit_count;
|
|
dev->dvbv3_ber = post_bit_error;
|
|
|
|
/* restart measurement */
|
|
ret = regmap_write(dev->regmap, 0xd1, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0xf9, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0xf9, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0xd1, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid delivery_system\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->post_bit_error.stat[0].uvalue = dev->post_bit_error;
|
|
c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->post_bit_count.stat[0].uvalue = dev->post_bit_count;
|
|
} else {
|
|
c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ds3103b_select_mclk(struct m88ds3103_dev *dev)
|
|
{
|
|
struct i2c_client *client = dev->client;
|
|
struct dtv_frontend_properties *c = &dev->fe.dtv_property_cache;
|
|
u32 adc_Freq_MHz[3] = {96, 93, 99};
|
|
u8 reg16_list[3] = {96, 92, 100}, reg16, reg15;
|
|
u32 offset_MHz[3];
|
|
u32 max_offset = 0;
|
|
u32 old_setting = dev->mclk;
|
|
u32 tuner_freq_MHz = c->frequency / 1000;
|
|
u8 i;
|
|
char big_symbol = 0;
|
|
|
|
big_symbol = (c->symbol_rate > 45010000) ? 1 : 0;
|
|
|
|
if (big_symbol) {
|
|
reg16 = 115;
|
|
} else {
|
|
reg16 = 96;
|
|
|
|
/* TODO: IS THIS NECESSARY ? */
|
|
for (i = 0; i < 3; i++) {
|
|
offset_MHz[i] = tuner_freq_MHz % adc_Freq_MHz[i];
|
|
|
|
if (offset_MHz[i] > (adc_Freq_MHz[i] / 2))
|
|
offset_MHz[i] = adc_Freq_MHz[i] - offset_MHz[i];
|
|
|
|
if (offset_MHz[i] > max_offset) {
|
|
max_offset = offset_MHz[i];
|
|
reg16 = reg16_list[i];
|
|
dev->mclk = adc_Freq_MHz[i] * 1000 * 1000;
|
|
|
|
if (big_symbol)
|
|
dev->mclk /= 2;
|
|
|
|
dev_dbg(&client->dev, "modifying mclk %u -> %u\n",
|
|
old_setting, dev->mclk);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (dev->mclk == 93000000)
|
|
regmap_write(dev->regmap, 0xA0, 0x42);
|
|
else if (dev->mclk == 96000000)
|
|
regmap_write(dev->regmap, 0xA0, 0x44);
|
|
else if (dev->mclk == 99000000)
|
|
regmap_write(dev->regmap, 0xA0, 0x46);
|
|
else if (dev->mclk == 110250000)
|
|
regmap_write(dev->regmap, 0xA0, 0x4E);
|
|
else
|
|
regmap_write(dev->regmap, 0xA0, 0x44);
|
|
|
|
reg15 = m88ds3103b_dt_read(dev, 0x15);
|
|
|
|
m88ds3103b_dt_write(dev, 0x05, 0x40);
|
|
m88ds3103b_dt_write(dev, 0x11, 0x08);
|
|
|
|
if (big_symbol)
|
|
reg15 |= 0x02;
|
|
else
|
|
reg15 &= ~0x02;
|
|
|
|
m88ds3103b_dt_write(dev, 0x15, reg15);
|
|
m88ds3103b_dt_write(dev, 0x16, reg16);
|
|
|
|
usleep_range(5000, 5500);
|
|
|
|
m88ds3103b_dt_write(dev, 0x05, 0x00);
|
|
m88ds3103b_dt_write(dev, 0x11, (u8)(big_symbol ? 0x0E : 0x0A));
|
|
|
|
usleep_range(5000, 5500);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int m88ds3103b_set_mclk(struct m88ds3103_dev *dev, u32 mclk_khz)
|
|
{
|
|
u8 reg11 = 0x0A, reg15, reg16, reg1D, reg1E, reg1F, tmp;
|
|
u8 sm, f0 = 0, f1 = 0, f2 = 0, f3 = 0;
|
|
u16 pll_div_fb, N;
|
|
u32 div;
|
|
|
|
reg15 = m88ds3103b_dt_read(dev, 0x15);
|
|
reg16 = m88ds3103b_dt_read(dev, 0x16);
|
|
reg1D = m88ds3103b_dt_read(dev, 0x1D);
|
|
|
|
if (dev->cfg->ts_mode != M88DS3103_TS_SERIAL) {
|
|
if (reg16 == 92)
|
|
tmp = 93;
|
|
else if (reg16 == 100)
|
|
tmp = 99;
|
|
else
|
|
tmp = 96;
|
|
|
|
mclk_khz *= tmp;
|
|
mclk_khz /= 96;
|
|
}
|
|
|
|
pll_div_fb = (reg15 & 0x01) << 8;
|
|
pll_div_fb += reg16;
|
|
pll_div_fb += 32;
|
|
|
|
div = 9000 * pll_div_fb * 4;
|
|
div /= mclk_khz;
|
|
|
|
if (dev->cfg->ts_mode == M88DS3103_TS_SERIAL) {
|
|
reg11 |= 0x02;
|
|
|
|
if (div <= 32) {
|
|
N = 2;
|
|
|
|
f0 = 0;
|
|
f1 = div / N;
|
|
f2 = div - f1;
|
|
f3 = 0;
|
|
} else if (div <= 34) {
|
|
N = 3;
|
|
|
|
f0 = div / N;
|
|
f1 = (div - f0) / (N - 1);
|
|
f2 = div - f0 - f1;
|
|
f3 = 0;
|
|
} else if (div <= 64) {
|
|
N = 4;
|
|
|
|
f0 = div / N;
|
|
f1 = (div - f0) / (N - 1);
|
|
f2 = (div - f0 - f1) / (N - 2);
|
|
f3 = div - f0 - f1 - f2;
|
|
} else {
|
|
N = 4;
|
|
|
|
f0 = 16;
|
|
f1 = 16;
|
|
f2 = 16;
|
|
f3 = 16;
|
|
}
|
|
|
|
if (f0 == 16)
|
|
f0 = 0;
|
|
else if ((f0 < 8) && (f0 != 0))
|
|
f0 = 8;
|
|
|
|
if (f1 == 16)
|
|
f1 = 0;
|
|
else if ((f1 < 8) && (f1 != 0))
|
|
f1 = 8;
|
|
|
|
if (f2 == 16)
|
|
f2 = 0;
|
|
else if ((f2 < 8) && (f2 != 0))
|
|
f2 = 8;
|
|
|
|
if (f3 == 16)
|
|
f3 = 0;
|
|
else if ((f3 < 8) && (f3 != 0))
|
|
f3 = 8;
|
|
} else {
|
|
reg11 &= ~0x02;
|
|
|
|
if (div <= 32) {
|
|
N = 2;
|
|
|
|
f0 = 0;
|
|
f1 = div / N;
|
|
f2 = div - f1;
|
|
f3 = 0;
|
|
} else if (div <= 48) {
|
|
N = 3;
|
|
|
|
f0 = div / N;
|
|
f1 = (div - f0) / (N - 1);
|
|
f2 = div - f0 - f1;
|
|
f3 = 0;
|
|
} else if (div <= 64) {
|
|
N = 4;
|
|
|
|
f0 = div / N;
|
|
f1 = (div - f0) / (N - 1);
|
|
f2 = (div - f0 - f1) / (N - 2);
|
|
f3 = div - f0 - f1 - f2;
|
|
} else {
|
|
N = 4;
|
|
|
|
f0 = 16;
|
|
f1 = 16;
|
|
f2 = 16;
|
|
f3 = 16;
|
|
}
|
|
|
|
if (f0 == 16)
|
|
f0 = 0;
|
|
else if ((f0 < 9) && (f0 != 0))
|
|
f0 = 9;
|
|
|
|
if (f1 == 16)
|
|
f1 = 0;
|
|
else if ((f1 < 9) && (f1 != 0))
|
|
f1 = 9;
|
|
|
|
if (f2 == 16)
|
|
f2 = 0;
|
|
else if ((f2 < 9) && (f2 != 0))
|
|
f2 = 9;
|
|
|
|
if (f3 == 16)
|
|
f3 = 0;
|
|
else if ((f3 < 9) && (f3 != 0))
|
|
f3 = 9;
|
|
}
|
|
|
|
sm = N - 1;
|
|
|
|
/* Write to registers */
|
|
//reg15 &= 0x01;
|
|
//reg15 |= (pll_div_fb >> 8) & 0x01;
|
|
|
|
//reg16 = pll_div_fb & 0xFF;
|
|
|
|
reg1D &= ~0x03;
|
|
reg1D |= sm;
|
|
reg1D |= 0x80;
|
|
|
|
reg1E = ((f3 << 4) + f2) & 0xFF;
|
|
reg1F = ((f1 << 4) + f0) & 0xFF;
|
|
|
|
m88ds3103b_dt_write(dev, 0x05, 0x40);
|
|
m88ds3103b_dt_write(dev, 0x11, 0x08);
|
|
m88ds3103b_dt_write(dev, 0x1D, reg1D);
|
|
m88ds3103b_dt_write(dev, 0x1E, reg1E);
|
|
m88ds3103b_dt_write(dev, 0x1F, reg1F);
|
|
|
|
m88ds3103b_dt_write(dev, 0x17, 0xc1);
|
|
m88ds3103b_dt_write(dev, 0x17, 0x81);
|
|
|
|
usleep_range(5000, 5500);
|
|
|
|
m88ds3103b_dt_write(dev, 0x05, 0x00);
|
|
m88ds3103b_dt_write(dev, 0x11, 0x0A);
|
|
|
|
usleep_range(5000, 5500);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int m88ds3103_set_frontend(struct dvb_frontend *fe)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
struct i2c_client *client = dev->client;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int ret, len;
|
|
const struct m88ds3103_reg_val *init;
|
|
u8 u8tmp, u8tmp1 = 0, u8tmp2 = 0; /* silence compiler warning */
|
|
u8 buf[3];
|
|
u16 u16tmp;
|
|
u32 tuner_frequency_khz, target_mclk, u32tmp;
|
|
s32 s32tmp;
|
|
static const struct reg_sequence reset_buf[] = {
|
|
{0x07, 0x80}, {0x07, 0x00}
|
|
};
|
|
|
|
dev_dbg(&client->dev,
|
|
"delivery_system=%d modulation=%d frequency=%u symbol_rate=%d inversion=%d pilot=%d rolloff=%d\n",
|
|
c->delivery_system, c->modulation, c->frequency, c->symbol_rate,
|
|
c->inversion, c->pilot, c->rolloff);
|
|
|
|
if (!dev->warm) {
|
|
ret = -EAGAIN;
|
|
goto err;
|
|
}
|
|
|
|
/* reset */
|
|
ret = regmap_multi_reg_write(dev->regmap, reset_buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Disable demod clock path */
|
|
if (dev->chip_id == M88RS6000_CHIP_ID) {
|
|
if (dev->chiptype == M88DS3103_CHIPTYPE_3103B) {
|
|
ret = regmap_read(dev->regmap, 0xb2, &u32tmp);
|
|
if (ret)
|
|
goto err;
|
|
if (u32tmp == 0x01) {
|
|
ret = regmap_write(dev->regmap, 0x00, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap, 0xb2, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
ret = regmap_write(dev->regmap, 0x06, 0xe0);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* program tuner */
|
|
if (fe->ops.tuner_ops.set_params) {
|
|
ret = fe->ops.tuner_ops.set_params(fe);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
if (fe->ops.tuner_ops.get_frequency) {
|
|
ret = fe->ops.tuner_ops.get_frequency(fe, &tuner_frequency_khz);
|
|
if (ret)
|
|
goto err;
|
|
} else {
|
|
/*
|
|
* Use nominal target frequency as tuner driver does not provide
|
|
* actual frequency used. Carrier offset calculation is not
|
|
* valid.
|
|
*/
|
|
tuner_frequency_khz = c->frequency;
|
|
}
|
|
|
|
/* set M88RS6000/DS3103B demod main mclk and ts mclk from tuner die */
|
|
if (dev->chip_id == M88RS6000_CHIP_ID) {
|
|
if (c->symbol_rate > 45010000)
|
|
dev->mclk = 110250000;
|
|
else
|
|
dev->mclk = 96000000;
|
|
|
|
if (c->delivery_system == SYS_DVBS)
|
|
target_mclk = 96000000;
|
|
else
|
|
target_mclk = 144000000;
|
|
|
|
if (dev->chiptype == M88DS3103_CHIPTYPE_3103B) {
|
|
m88ds3103b_select_mclk(dev);
|
|
m88ds3103b_set_mclk(dev, target_mclk / 1000);
|
|
}
|
|
|
|
/* Enable demod clock path */
|
|
ret = regmap_write(dev->regmap, 0x06, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
usleep_range(10000, 20000);
|
|
} else {
|
|
/* set M88DS3103 mclk and ts mclk. */
|
|
dev->mclk = 96000000;
|
|
|
|
switch (dev->cfg->ts_mode) {
|
|
case M88DS3103_TS_SERIAL:
|
|
case M88DS3103_TS_SERIAL_D7:
|
|
target_mclk = dev->cfg->ts_clk;
|
|
break;
|
|
case M88DS3103_TS_PARALLEL:
|
|
case M88DS3103_TS_CI:
|
|
if (c->delivery_system == SYS_DVBS)
|
|
target_mclk = 96000000;
|
|
else {
|
|
if (c->symbol_rate < 18000000)
|
|
target_mclk = 96000000;
|
|
else if (c->symbol_rate < 28000000)
|
|
target_mclk = 144000000;
|
|
else
|
|
target_mclk = 192000000;
|
|
}
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid ts_mode\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
switch (target_mclk) {
|
|
case 96000000:
|
|
u8tmp1 = 0x02; /* 0b10 */
|
|
u8tmp2 = 0x01; /* 0b01 */
|
|
break;
|
|
case 144000000:
|
|
u8tmp1 = 0x00; /* 0b00 */
|
|
u8tmp2 = 0x01; /* 0b01 */
|
|
break;
|
|
case 192000000:
|
|
u8tmp1 = 0x03; /* 0b11 */
|
|
u8tmp2 = 0x00; /* 0b00 */
|
|
break;
|
|
}
|
|
ret = m88ds3103_update_bits(dev, 0x22, 0xc0, u8tmp1 << 6);
|
|
if (ret)
|
|
goto err;
|
|
ret = m88ds3103_update_bits(dev, 0x24, 0xc0, u8tmp2 << 6);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_write(dev->regmap, 0xb2, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0x00, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
|
|
switch (c->delivery_system) {
|
|
case SYS_DVBS:
|
|
if (dev->chip_id == M88RS6000_CHIP_ID) {
|
|
len = ARRAY_SIZE(m88rs6000_dvbs_init_reg_vals);
|
|
init = m88rs6000_dvbs_init_reg_vals;
|
|
} else {
|
|
len = ARRAY_SIZE(m88ds3103_dvbs_init_reg_vals);
|
|
init = m88ds3103_dvbs_init_reg_vals;
|
|
}
|
|
break;
|
|
case SYS_DVBS2:
|
|
if (dev->chip_id == M88RS6000_CHIP_ID) {
|
|
len = ARRAY_SIZE(m88rs6000_dvbs2_init_reg_vals);
|
|
init = m88rs6000_dvbs2_init_reg_vals;
|
|
} else {
|
|
len = ARRAY_SIZE(m88ds3103_dvbs2_init_reg_vals);
|
|
init = m88ds3103_dvbs2_init_reg_vals;
|
|
}
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid delivery_system\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
/* program init table */
|
|
if (c->delivery_system != dev->delivery_system) {
|
|
ret = m88ds3103_wr_reg_val_tab(dev, init, len);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
if (dev->chip_id == M88RS6000_CHIP_ID) {
|
|
if (c->delivery_system == SYS_DVBS2 &&
|
|
c->symbol_rate <= 5000000) {
|
|
ret = regmap_write(dev->regmap, 0xc0, 0x04);
|
|
if (ret)
|
|
goto err;
|
|
buf[0] = 0x09;
|
|
buf[1] = 0x22;
|
|
buf[2] = 0x88;
|
|
ret = regmap_bulk_write(dev->regmap, 0x8a, buf, 3);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
ret = m88ds3103_update_bits(dev, 0x9d, 0x08, 0x08);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (dev->chiptype == M88DS3103_CHIPTYPE_3103B) {
|
|
buf[0] = m88ds3103b_dt_read(dev, 0x15);
|
|
buf[1] = m88ds3103b_dt_read(dev, 0x16);
|
|
|
|
if (c->symbol_rate > 45010000) {
|
|
buf[0] &= ~0x03;
|
|
buf[0] |= 0x02;
|
|
buf[0] |= ((147 - 32) >> 8) & 0x01;
|
|
buf[1] = (147 - 32) & 0xFF;
|
|
|
|
dev->mclk = 110250 * 1000;
|
|
} else {
|
|
buf[0] &= ~0x03;
|
|
buf[0] |= ((128 - 32) >> 8) & 0x01;
|
|
buf[1] = (128 - 32) & 0xFF;
|
|
|
|
dev->mclk = 96000 * 1000;
|
|
}
|
|
m88ds3103b_dt_write(dev, 0x15, buf[0]);
|
|
m88ds3103b_dt_write(dev, 0x16, buf[1]);
|
|
|
|
regmap_read(dev->regmap, 0x30, &u32tmp);
|
|
u32tmp &= ~0x80;
|
|
regmap_write(dev->regmap, 0x30, u32tmp & 0xff);
|
|
}
|
|
|
|
ret = regmap_write(dev->regmap, 0xf1, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (dev->chiptype != M88DS3103_CHIPTYPE_3103B) {
|
|
ret = m88ds3103_update_bits(dev, 0x30, 0x80, 0x80);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
switch (dev->cfg->ts_mode) {
|
|
case M88DS3103_TS_SERIAL:
|
|
u8tmp1 = 0x00;
|
|
u8tmp = 0x06;
|
|
break;
|
|
case M88DS3103_TS_SERIAL_D7:
|
|
u8tmp1 = 0x20;
|
|
u8tmp = 0x06;
|
|
break;
|
|
case M88DS3103_TS_PARALLEL:
|
|
u8tmp = 0x02;
|
|
if (dev->chiptype == M88DS3103_CHIPTYPE_3103B) {
|
|
u8tmp = 0x01;
|
|
u8tmp1 = 0x01;
|
|
}
|
|
break;
|
|
case M88DS3103_TS_CI:
|
|
u8tmp = 0x03;
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid ts_mode\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
if (dev->cfg->ts_clk_pol)
|
|
u8tmp |= 0x40;
|
|
|
|
/* TS mode */
|
|
ret = regmap_write(dev->regmap, 0xfd, u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
switch (dev->cfg->ts_mode) {
|
|
case M88DS3103_TS_SERIAL:
|
|
case M88DS3103_TS_SERIAL_D7:
|
|
ret = m88ds3103_update_bits(dev, 0x29, 0x20, u8tmp1);
|
|
if (ret)
|
|
goto err;
|
|
u16tmp = 0;
|
|
u8tmp1 = 0x3f;
|
|
u8tmp2 = 0x3f;
|
|
break;
|
|
case M88DS3103_TS_PARALLEL:
|
|
if (dev->chiptype == M88DS3103_CHIPTYPE_3103B) {
|
|
ret = m88ds3103_update_bits(dev, 0x29, 0x01, u8tmp1);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
fallthrough;
|
|
default:
|
|
u16tmp = DIV_ROUND_UP(target_mclk, dev->cfg->ts_clk);
|
|
u8tmp1 = u16tmp / 2 - 1;
|
|
u8tmp2 = DIV_ROUND_UP(u16tmp, 2) - 1;
|
|
}
|
|
|
|
dev_dbg(&client->dev, "target_mclk=%u ts_clk=%u ts_clk_divide_ratio=%u\n",
|
|
target_mclk, dev->cfg->ts_clk, u16tmp);
|
|
|
|
/* u8tmp1[5:2] => fe[3:0], u8tmp1[1:0] => ea[7:6] */
|
|
/* u8tmp2[5:0] => ea[5:0] */
|
|
u8tmp = (u8tmp1 >> 2) & 0x0f;
|
|
ret = regmap_update_bits(dev->regmap, 0xfe, 0x0f, u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
u8tmp = ((u8tmp1 & 0x03) << 6) | u8tmp2 >> 0;
|
|
ret = regmap_write(dev->regmap, 0xea, u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (c->symbol_rate <= 3000000)
|
|
u8tmp = 0x20;
|
|
else if (c->symbol_rate <= 10000000)
|
|
u8tmp = 0x10;
|
|
else
|
|
u8tmp = 0x06;
|
|
|
|
if (dev->chiptype == M88DS3103_CHIPTYPE_3103B)
|
|
m88ds3103b_set_mclk(dev, target_mclk / 1000);
|
|
|
|
ret = regmap_write(dev->regmap, 0xc3, 0x08);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0xc8, u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0xc4, 0x08);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0xc7, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
u16tmp = DIV_ROUND_CLOSEST_ULL((u64)c->symbol_rate * 0x10000, dev->mclk);
|
|
buf[0] = (u16tmp >> 0) & 0xff;
|
|
buf[1] = (u16tmp >> 8) & 0xff;
|
|
ret = regmap_bulk_write(dev->regmap, 0x61, buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = m88ds3103_update_bits(dev, 0x4d, 0x02, dev->cfg->spec_inv << 1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = m88ds3103_update_bits(dev, 0x30, 0x10, dev->cfg->agc_inv << 4);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0x33, dev->cfg->agc);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (dev->chiptype == M88DS3103_CHIPTYPE_3103B) {
|
|
/* enable/disable 192M LDPC clock */
|
|
ret = m88ds3103_update_bits(dev, 0x29, 0x10,
|
|
(c->delivery_system == SYS_DVBS) ? 0x10 : 0x0);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = m88ds3103_update_bits(dev, 0xc9, 0x08, 0x08);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
dev_dbg(&client->dev, "carrier offset=%d\n",
|
|
(tuner_frequency_khz - c->frequency));
|
|
|
|
/* Use 32-bit calc as there is no s64 version of DIV_ROUND_CLOSEST() */
|
|
s32tmp = 0x10000 * (tuner_frequency_khz - c->frequency);
|
|
s32tmp = DIV_ROUND_CLOSEST(s32tmp, dev->mclk / 1000);
|
|
buf[0] = (s32tmp >> 0) & 0xff;
|
|
buf[1] = (s32tmp >> 8) & 0xff;
|
|
ret = regmap_bulk_write(dev->regmap, 0x5e, buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0x00, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0xb2, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev->delivery_system = c->delivery_system;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ds3103_init(struct dvb_frontend *fe)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
struct i2c_client *client = dev->client;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int ret, len, rem;
|
|
unsigned int utmp;
|
|
const struct firmware *firmware;
|
|
const char *name;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
/* set cold state by default */
|
|
dev->warm = false;
|
|
|
|
/* wake up device from sleep */
|
|
ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* firmware status */
|
|
ret = regmap_read(dev->regmap, 0xb9, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev_dbg(&client->dev, "firmware=%02x\n", utmp);
|
|
|
|
if (utmp)
|
|
goto warm;
|
|
|
|
/* global reset, global diseqc reset, global fec reset */
|
|
ret = regmap_write(dev->regmap, 0x07, 0xe0);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap, 0x07, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* cold state - try to download firmware */
|
|
dev_info(&client->dev, "found a '%s' in cold state\n",
|
|
dev->fe.ops.info.name);
|
|
|
|
if (dev->chiptype == M88DS3103_CHIPTYPE_3103B)
|
|
name = M88DS3103B_FIRMWARE;
|
|
else if (dev->chip_id == M88RS6000_CHIP_ID)
|
|
name = M88RS6000_FIRMWARE;
|
|
else
|
|
name = M88DS3103_FIRMWARE;
|
|
|
|
/* request the firmware, this will block and timeout */
|
|
ret = request_firmware(&firmware, name, &client->dev);
|
|
if (ret) {
|
|
dev_err(&client->dev, "firmware file '%s' not found\n", name);
|
|
goto err;
|
|
}
|
|
|
|
dev_info(&client->dev, "downloading firmware from file '%s'\n", name);
|
|
|
|
ret = regmap_write(dev->regmap, 0xb2, 0x01);
|
|
if (ret)
|
|
goto err_release_firmware;
|
|
|
|
for (rem = firmware->size; rem > 0; rem -= (dev->cfg->i2c_wr_max - 1)) {
|
|
len = min(dev->cfg->i2c_wr_max - 1, rem);
|
|
ret = regmap_bulk_write(dev->regmap, 0xb0,
|
|
&firmware->data[firmware->size - rem],
|
|
len);
|
|
if (ret) {
|
|
dev_err(&client->dev, "firmware download failed %d\n",
|
|
ret);
|
|
goto err_release_firmware;
|
|
}
|
|
}
|
|
|
|
ret = regmap_write(dev->regmap, 0xb2, 0x00);
|
|
if (ret)
|
|
goto err_release_firmware;
|
|
|
|
release_firmware(firmware);
|
|
|
|
ret = regmap_read(dev->regmap, 0xb9, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (!utmp) {
|
|
ret = -EINVAL;
|
|
dev_info(&client->dev, "firmware did not run\n");
|
|
goto err;
|
|
}
|
|
|
|
dev_info(&client->dev, "found a '%s' in warm state\n",
|
|
dev->fe.ops.info.name);
|
|
dev_info(&client->dev, "firmware version: %X.%X\n",
|
|
(utmp >> 4) & 0xf, (utmp >> 0 & 0xf));
|
|
|
|
if (dev->chiptype == M88DS3103_CHIPTYPE_3103B) {
|
|
m88ds3103b_dt_write(dev, 0x21, 0x92);
|
|
m88ds3103b_dt_write(dev, 0x15, 0x6C);
|
|
m88ds3103b_dt_write(dev, 0x17, 0xC1);
|
|
m88ds3103b_dt_write(dev, 0x17, 0x81);
|
|
}
|
|
warm:
|
|
/* warm state */
|
|
dev->warm = true;
|
|
|
|
/* init stats here in order signal app which stats are supported */
|
|
c->cnr.len = 1;
|
|
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->post_bit_error.len = 1;
|
|
c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->post_bit_count.len = 1;
|
|
c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
|
|
return 0;
|
|
err_release_firmware:
|
|
release_firmware(firmware);
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ds3103_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
struct i2c_client *client = dev->client;
|
|
int ret;
|
|
unsigned int utmp;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
dev->fe_status = 0;
|
|
dev->delivery_system = SYS_UNDEFINED;
|
|
|
|
/* TS Hi-Z */
|
|
if (dev->chip_id == M88RS6000_CHIP_ID)
|
|
utmp = 0x29;
|
|
else
|
|
utmp = 0x27;
|
|
ret = m88ds3103_update_bits(dev, utmp, 0x01, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* sleep */
|
|
ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x10);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ds3103_get_frontend(struct dvb_frontend *fe,
|
|
struct dtv_frontend_properties *c)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
struct i2c_client *client = dev->client;
|
|
int ret;
|
|
u8 buf[3];
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
if (!dev->warm || !(dev->fe_status & FE_HAS_LOCK)) {
|
|
ret = 0;
|
|
goto err;
|
|
}
|
|
|
|
switch (c->delivery_system) {
|
|
case SYS_DVBS:
|
|
ret = regmap_bulk_read(dev->regmap, 0xe0, &buf[0], 1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_bulk_read(dev->regmap, 0xe6, &buf[1], 1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
switch ((buf[0] >> 2) & 0x01) {
|
|
case 0:
|
|
c->inversion = INVERSION_OFF;
|
|
break;
|
|
case 1:
|
|
c->inversion = INVERSION_ON;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[1] >> 5) & 0x07) {
|
|
case 0:
|
|
c->fec_inner = FEC_7_8;
|
|
break;
|
|
case 1:
|
|
c->fec_inner = FEC_5_6;
|
|
break;
|
|
case 2:
|
|
c->fec_inner = FEC_3_4;
|
|
break;
|
|
case 3:
|
|
c->fec_inner = FEC_2_3;
|
|
break;
|
|
case 4:
|
|
c->fec_inner = FEC_1_2;
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid fec_inner\n");
|
|
}
|
|
|
|
c->modulation = QPSK;
|
|
|
|
break;
|
|
case SYS_DVBS2:
|
|
ret = regmap_bulk_read(dev->regmap, 0x7e, &buf[0], 1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_bulk_read(dev->regmap, 0x89, &buf[1], 1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_bulk_read(dev->regmap, 0xf2, &buf[2], 1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
switch ((buf[0] >> 0) & 0x0f) {
|
|
case 2:
|
|
c->fec_inner = FEC_2_5;
|
|
break;
|
|
case 3:
|
|
c->fec_inner = FEC_1_2;
|
|
break;
|
|
case 4:
|
|
c->fec_inner = FEC_3_5;
|
|
break;
|
|
case 5:
|
|
c->fec_inner = FEC_2_3;
|
|
break;
|
|
case 6:
|
|
c->fec_inner = FEC_3_4;
|
|
break;
|
|
case 7:
|
|
c->fec_inner = FEC_4_5;
|
|
break;
|
|
case 8:
|
|
c->fec_inner = FEC_5_6;
|
|
break;
|
|
case 9:
|
|
c->fec_inner = FEC_8_9;
|
|
break;
|
|
case 10:
|
|
c->fec_inner = FEC_9_10;
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid fec_inner\n");
|
|
}
|
|
|
|
switch ((buf[0] >> 5) & 0x01) {
|
|
case 0:
|
|
c->pilot = PILOT_OFF;
|
|
break;
|
|
case 1:
|
|
c->pilot = PILOT_ON;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[0] >> 6) & 0x07) {
|
|
case 0:
|
|
c->modulation = QPSK;
|
|
break;
|
|
case 1:
|
|
c->modulation = PSK_8;
|
|
break;
|
|
case 2:
|
|
c->modulation = APSK_16;
|
|
break;
|
|
case 3:
|
|
c->modulation = APSK_32;
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid modulation\n");
|
|
}
|
|
|
|
switch ((buf[1] >> 7) & 0x01) {
|
|
case 0:
|
|
c->inversion = INVERSION_OFF;
|
|
break;
|
|
case 1:
|
|
c->inversion = INVERSION_ON;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[2] >> 0) & 0x03) {
|
|
case 0:
|
|
c->rolloff = ROLLOFF_35;
|
|
break;
|
|
case 1:
|
|
c->rolloff = ROLLOFF_25;
|
|
break;
|
|
case 2:
|
|
c->rolloff = ROLLOFF_20;
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid rolloff\n");
|
|
}
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid delivery_system\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_bulk_read(dev->regmap, 0x6d, buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
c->symbol_rate = DIV_ROUND_CLOSEST_ULL((u64)(buf[1] << 8 | buf[0] << 0) * dev->mclk, 0x10000);
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ds3103_read_snr(struct dvb_frontend *fe, u16 *snr)
|
|
{
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
|
|
if (c->cnr.stat[0].scale == FE_SCALE_DECIBEL)
|
|
*snr = div_s64(c->cnr.stat[0].svalue, 100);
|
|
else
|
|
*snr = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int m88ds3103_read_ber(struct dvb_frontend *fe, u32 *ber)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
|
|
*ber = dev->dvbv3_ber;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int m88ds3103_set_tone(struct dvb_frontend *fe,
|
|
enum fe_sec_tone_mode fe_sec_tone_mode)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
struct i2c_client *client = dev->client;
|
|
int ret;
|
|
unsigned int utmp, tone, reg_a1_mask;
|
|
|
|
dev_dbg(&client->dev, "fe_sec_tone_mode=%d\n", fe_sec_tone_mode);
|
|
|
|
if (!dev->warm) {
|
|
ret = -EAGAIN;
|
|
goto err;
|
|
}
|
|
|
|
switch (fe_sec_tone_mode) {
|
|
case SEC_TONE_ON:
|
|
tone = 0;
|
|
reg_a1_mask = 0x47;
|
|
break;
|
|
case SEC_TONE_OFF:
|
|
tone = 1;
|
|
reg_a1_mask = 0x00;
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid fe_sec_tone_mode\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
utmp = tone << 7 | dev->cfg->envelope_mode << 5;
|
|
ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
utmp = 1 << 2;
|
|
ret = m88ds3103_update_bits(dev, 0xa1, reg_a1_mask, utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ds3103_set_voltage(struct dvb_frontend *fe,
|
|
enum fe_sec_voltage fe_sec_voltage)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
struct i2c_client *client = dev->client;
|
|
int ret;
|
|
unsigned int utmp;
|
|
bool voltage_sel, voltage_dis;
|
|
|
|
dev_dbg(&client->dev, "fe_sec_voltage=%d\n", fe_sec_voltage);
|
|
|
|
if (!dev->warm) {
|
|
ret = -EAGAIN;
|
|
goto err;
|
|
}
|
|
|
|
switch (fe_sec_voltage) {
|
|
case SEC_VOLTAGE_18:
|
|
voltage_sel = true;
|
|
voltage_dis = false;
|
|
break;
|
|
case SEC_VOLTAGE_13:
|
|
voltage_sel = false;
|
|
voltage_dis = false;
|
|
break;
|
|
case SEC_VOLTAGE_OFF:
|
|
voltage_sel = false;
|
|
voltage_dis = true;
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid fe_sec_voltage\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
/* output pin polarity */
|
|
voltage_sel ^= dev->cfg->lnb_hv_pol;
|
|
voltage_dis ^= dev->cfg->lnb_en_pol;
|
|
|
|
utmp = voltage_dis << 1 | voltage_sel << 0;
|
|
ret = m88ds3103_update_bits(dev, 0xa2, 0x03, utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ds3103_diseqc_send_master_cmd(struct dvb_frontend *fe,
|
|
struct dvb_diseqc_master_cmd *diseqc_cmd)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
struct i2c_client *client = dev->client;
|
|
int ret;
|
|
unsigned int utmp;
|
|
unsigned long timeout;
|
|
|
|
dev_dbg(&client->dev, "msg=%*ph\n",
|
|
diseqc_cmd->msg_len, diseqc_cmd->msg);
|
|
|
|
if (!dev->warm) {
|
|
ret = -EAGAIN;
|
|
goto err;
|
|
}
|
|
|
|
if (diseqc_cmd->msg_len < 3 || diseqc_cmd->msg_len > 6) {
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
utmp = dev->cfg->envelope_mode << 5;
|
|
ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_bulk_write(dev->regmap, 0xa3, diseqc_cmd->msg,
|
|
diseqc_cmd->msg_len);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0xa1,
|
|
(diseqc_cmd->msg_len - 1) << 3 | 0x07);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* wait DiSEqC TX ready */
|
|
#define SEND_MASTER_CMD_TIMEOUT 120
|
|
timeout = jiffies + msecs_to_jiffies(SEND_MASTER_CMD_TIMEOUT);
|
|
|
|
/* DiSEqC message period is 13.5 ms per byte */
|
|
utmp = diseqc_cmd->msg_len * 13500;
|
|
usleep_range(utmp - 4000, utmp);
|
|
|
|
for (utmp = 1; !time_after(jiffies, timeout) && utmp;) {
|
|
ret = regmap_read(dev->regmap, 0xa1, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
utmp = (utmp >> 6) & 0x1;
|
|
}
|
|
|
|
if (utmp == 0) {
|
|
dev_dbg(&client->dev, "diseqc tx took %u ms\n",
|
|
jiffies_to_msecs(jiffies) -
|
|
(jiffies_to_msecs(timeout) - SEND_MASTER_CMD_TIMEOUT));
|
|
} else {
|
|
dev_dbg(&client->dev, "diseqc tx timeout\n");
|
|
|
|
ret = m88ds3103_update_bits(dev, 0xa1, 0xc0, 0x40);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
ret = m88ds3103_update_bits(dev, 0xa2, 0xc0, 0x80);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (utmp == 1) {
|
|
ret = -ETIMEDOUT;
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ds3103_diseqc_send_burst(struct dvb_frontend *fe,
|
|
enum fe_sec_mini_cmd fe_sec_mini_cmd)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
struct i2c_client *client = dev->client;
|
|
int ret;
|
|
unsigned int utmp, burst;
|
|
unsigned long timeout;
|
|
|
|
dev_dbg(&client->dev, "fe_sec_mini_cmd=%d\n", fe_sec_mini_cmd);
|
|
|
|
if (!dev->warm) {
|
|
ret = -EAGAIN;
|
|
goto err;
|
|
}
|
|
|
|
utmp = dev->cfg->envelope_mode << 5;
|
|
ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
switch (fe_sec_mini_cmd) {
|
|
case SEC_MINI_A:
|
|
burst = 0x02;
|
|
break;
|
|
case SEC_MINI_B:
|
|
burst = 0x01;
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid fe_sec_mini_cmd\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_write(dev->regmap, 0xa1, burst);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* wait DiSEqC TX ready */
|
|
#define SEND_BURST_TIMEOUT 40
|
|
timeout = jiffies + msecs_to_jiffies(SEND_BURST_TIMEOUT);
|
|
|
|
/* DiSEqC ToneBurst period is 12.5 ms */
|
|
usleep_range(8500, 12500);
|
|
|
|
for (utmp = 1; !time_after(jiffies, timeout) && utmp;) {
|
|
ret = regmap_read(dev->regmap, 0xa1, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
utmp = (utmp >> 6) & 0x1;
|
|
}
|
|
|
|
if (utmp == 0) {
|
|
dev_dbg(&client->dev, "diseqc tx took %u ms\n",
|
|
jiffies_to_msecs(jiffies) -
|
|
(jiffies_to_msecs(timeout) - SEND_BURST_TIMEOUT));
|
|
} else {
|
|
dev_dbg(&client->dev, "diseqc tx timeout\n");
|
|
|
|
ret = m88ds3103_update_bits(dev, 0xa1, 0xc0, 0x40);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
ret = m88ds3103_update_bits(dev, 0xa2, 0xc0, 0x80);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (utmp == 1) {
|
|
ret = -ETIMEDOUT;
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ds3103_get_tune_settings(struct dvb_frontend *fe,
|
|
struct dvb_frontend_tune_settings *s)
|
|
{
|
|
s->min_delay_ms = 3000;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void m88ds3103_release(struct dvb_frontend *fe)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
struct i2c_client *client = dev->client;
|
|
|
|
i2c_unregister_device(client);
|
|
}
|
|
|
|
static int m88ds3103_select(struct i2c_mux_core *muxc, u32 chan)
|
|
{
|
|
struct m88ds3103_dev *dev = i2c_mux_priv(muxc);
|
|
struct i2c_client *client = dev->client;
|
|
int ret;
|
|
struct i2c_msg msg = {
|
|
.addr = client->addr,
|
|
.flags = 0,
|
|
.len = 2,
|
|
.buf = "\x03\x11",
|
|
};
|
|
|
|
/* Open tuner I2C repeater for 1 xfer, closes automatically */
|
|
ret = __i2c_transfer(client->adapter, &msg, 1);
|
|
if (ret != 1) {
|
|
dev_warn(&client->dev, "i2c wr failed=%d\n", ret);
|
|
if (ret >= 0)
|
|
ret = -EREMOTEIO;
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* XXX: That is wrapper to m88ds3103_probe() via driver core in order to provide
|
|
* proper I2C client for legacy media attach binding.
|
|
* New users must use I2C client binding directly!
|
|
*/
|
|
struct dvb_frontend *m88ds3103_attach(const struct m88ds3103_config *cfg,
|
|
struct i2c_adapter *i2c,
|
|
struct i2c_adapter **tuner_i2c_adapter)
|
|
{
|
|
struct i2c_client *client;
|
|
struct i2c_board_info board_info;
|
|
struct m88ds3103_platform_data pdata = {};
|
|
|
|
pdata.clk = cfg->clock;
|
|
pdata.i2c_wr_max = cfg->i2c_wr_max;
|
|
pdata.ts_mode = cfg->ts_mode;
|
|
pdata.ts_clk = cfg->ts_clk;
|
|
pdata.ts_clk_pol = cfg->ts_clk_pol;
|
|
pdata.spec_inv = cfg->spec_inv;
|
|
pdata.agc = cfg->agc;
|
|
pdata.agc_inv = cfg->agc_inv;
|
|
pdata.clk_out = cfg->clock_out;
|
|
pdata.envelope_mode = cfg->envelope_mode;
|
|
pdata.lnb_hv_pol = cfg->lnb_hv_pol;
|
|
pdata.lnb_en_pol = cfg->lnb_en_pol;
|
|
pdata.attach_in_use = true;
|
|
|
|
memset(&board_info, 0, sizeof(board_info));
|
|
strscpy(board_info.type, "m88ds3103", I2C_NAME_SIZE);
|
|
board_info.addr = cfg->i2c_addr;
|
|
board_info.platform_data = &pdata;
|
|
client = i2c_new_client_device(i2c, &board_info);
|
|
if (!i2c_client_has_driver(client))
|
|
return NULL;
|
|
|
|
*tuner_i2c_adapter = pdata.get_i2c_adapter(client);
|
|
return pdata.get_dvb_frontend(client);
|
|
}
|
|
EXPORT_SYMBOL(m88ds3103_attach);
|
|
|
|
static const struct dvb_frontend_ops m88ds3103_ops = {
|
|
.delsys = {SYS_DVBS, SYS_DVBS2},
|
|
.info = {
|
|
.name = "Montage Technology M88DS3103",
|
|
.frequency_min_hz = 950 * MHz,
|
|
.frequency_max_hz = 2150 * MHz,
|
|
.frequency_tolerance_hz = 5 * MHz,
|
|
.symbol_rate_min = 1000000,
|
|
.symbol_rate_max = 45000000,
|
|
.caps = FE_CAN_INVERSION_AUTO |
|
|
FE_CAN_FEC_1_2 |
|
|
FE_CAN_FEC_2_3 |
|
|
FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_4_5 |
|
|
FE_CAN_FEC_5_6 |
|
|
FE_CAN_FEC_6_7 |
|
|
FE_CAN_FEC_7_8 |
|
|
FE_CAN_FEC_8_9 |
|
|
FE_CAN_FEC_AUTO |
|
|
FE_CAN_QPSK |
|
|
FE_CAN_RECOVER |
|
|
FE_CAN_2G_MODULATION
|
|
},
|
|
|
|
.release = m88ds3103_release,
|
|
|
|
.get_tune_settings = m88ds3103_get_tune_settings,
|
|
|
|
.init = m88ds3103_init,
|
|
.sleep = m88ds3103_sleep,
|
|
|
|
.set_frontend = m88ds3103_set_frontend,
|
|
.get_frontend = m88ds3103_get_frontend,
|
|
|
|
.read_status = m88ds3103_read_status,
|
|
.read_snr = m88ds3103_read_snr,
|
|
.read_ber = m88ds3103_read_ber,
|
|
|
|
.diseqc_send_master_cmd = m88ds3103_diseqc_send_master_cmd,
|
|
.diseqc_send_burst = m88ds3103_diseqc_send_burst,
|
|
|
|
.set_tone = m88ds3103_set_tone,
|
|
.set_voltage = m88ds3103_set_voltage,
|
|
};
|
|
|
|
static struct dvb_frontend *m88ds3103_get_dvb_frontend(struct i2c_client *client)
|
|
{
|
|
struct m88ds3103_dev *dev = i2c_get_clientdata(client);
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
return &dev->fe;
|
|
}
|
|
|
|
static struct i2c_adapter *m88ds3103_get_i2c_adapter(struct i2c_client *client)
|
|
{
|
|
struct m88ds3103_dev *dev = i2c_get_clientdata(client);
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
return dev->muxc->adapter[0];
|
|
}
|
|
|
|
static int m88ds3103_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct m88ds3103_dev *dev;
|
|
struct m88ds3103_platform_data *pdata = client->dev.platform_data;
|
|
int ret;
|
|
unsigned int utmp;
|
|
|
|
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
|
|
if (!dev) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
dev->client = client;
|
|
dev->config.clock = pdata->clk;
|
|
dev->config.i2c_wr_max = pdata->i2c_wr_max;
|
|
dev->config.ts_mode = pdata->ts_mode;
|
|
dev->config.ts_clk = pdata->ts_clk * 1000;
|
|
dev->config.ts_clk_pol = pdata->ts_clk_pol;
|
|
dev->config.spec_inv = pdata->spec_inv;
|
|
dev->config.agc_inv = pdata->agc_inv;
|
|
dev->config.clock_out = pdata->clk_out;
|
|
dev->config.envelope_mode = pdata->envelope_mode;
|
|
dev->config.agc = pdata->agc;
|
|
dev->config.lnb_hv_pol = pdata->lnb_hv_pol;
|
|
dev->config.lnb_en_pol = pdata->lnb_en_pol;
|
|
dev->cfg = &dev->config;
|
|
/* create regmap */
|
|
dev->regmap_config.reg_bits = 8;
|
|
dev->regmap_config.val_bits = 8;
|
|
dev->regmap_config.lock_arg = dev;
|
|
dev->regmap = devm_regmap_init_i2c(client, &dev->regmap_config);
|
|
if (IS_ERR(dev->regmap)) {
|
|
ret = PTR_ERR(dev->regmap);
|
|
goto err_kfree;
|
|
}
|
|
|
|
/* 0x00: chip id[6:0], 0x01: chip ver[7:0], 0x02: chip ver[15:8] */
|
|
ret = regmap_read(dev->regmap, 0x00, &utmp);
|
|
if (ret)
|
|
goto err_kfree;
|
|
|
|
dev->chip_id = utmp >> 1;
|
|
dev->chiptype = (u8)id->driver_data;
|
|
|
|
dev_dbg(&client->dev, "chip_id=%02x\n", dev->chip_id);
|
|
|
|
switch (dev->chip_id) {
|
|
case M88RS6000_CHIP_ID:
|
|
case M88DS3103_CHIP_ID:
|
|
break;
|
|
default:
|
|
ret = -ENODEV;
|
|
dev_err(&client->dev, "Unknown device. Chip_id=%02x\n", dev->chip_id);
|
|
goto err_kfree;
|
|
}
|
|
|
|
switch (dev->cfg->clock_out) {
|
|
case M88DS3103_CLOCK_OUT_DISABLED:
|
|
utmp = 0x80;
|
|
break;
|
|
case M88DS3103_CLOCK_OUT_ENABLED:
|
|
utmp = 0x00;
|
|
break;
|
|
case M88DS3103_CLOCK_OUT_ENABLED_DIV2:
|
|
utmp = 0x10;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
goto err_kfree;
|
|
}
|
|
|
|
if (!pdata->ts_clk) {
|
|
ret = -EINVAL;
|
|
goto err_kfree;
|
|
}
|
|
|
|
/* 0x29 register is defined differently for m88rs6000. */
|
|
/* set internal tuner address to 0x21 */
|
|
if (dev->chip_id == M88RS6000_CHIP_ID)
|
|
utmp = 0x00;
|
|
|
|
ret = regmap_write(dev->regmap, 0x29, utmp);
|
|
if (ret)
|
|
goto err_kfree;
|
|
|
|
/* sleep */
|
|
ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x00);
|
|
if (ret)
|
|
goto err_kfree;
|
|
ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x01);
|
|
if (ret)
|
|
goto err_kfree;
|
|
ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x10);
|
|
if (ret)
|
|
goto err_kfree;
|
|
|
|
/* create mux i2c adapter for tuner */
|
|
dev->muxc = i2c_mux_alloc(client->adapter, &client->dev, 1, 0, 0,
|
|
m88ds3103_select, NULL);
|
|
if (!dev->muxc) {
|
|
ret = -ENOMEM;
|
|
goto err_kfree;
|
|
}
|
|
dev->muxc->priv = dev;
|
|
ret = i2c_mux_add_adapter(dev->muxc, 0, 0, 0);
|
|
if (ret)
|
|
goto err_kfree;
|
|
|
|
/* create dvb_frontend */
|
|
memcpy(&dev->fe.ops, &m88ds3103_ops, sizeof(struct dvb_frontend_ops));
|
|
if (dev->chiptype == M88DS3103_CHIPTYPE_3103B)
|
|
strscpy(dev->fe.ops.info.name, "Montage Technology M88DS3103B",
|
|
sizeof(dev->fe.ops.info.name));
|
|
else if (dev->chip_id == M88RS6000_CHIP_ID)
|
|
strscpy(dev->fe.ops.info.name, "Montage Technology M88RS6000",
|
|
sizeof(dev->fe.ops.info.name));
|
|
if (!pdata->attach_in_use)
|
|
dev->fe.ops.release = NULL;
|
|
dev->fe.demodulator_priv = dev;
|
|
i2c_set_clientdata(client, dev);
|
|
|
|
/* setup callbacks */
|
|
pdata->get_dvb_frontend = m88ds3103_get_dvb_frontend;
|
|
pdata->get_i2c_adapter = m88ds3103_get_i2c_adapter;
|
|
|
|
if (dev->chiptype == M88DS3103_CHIPTYPE_3103B) {
|
|
/* enable i2c repeater for tuner */
|
|
m88ds3103_update_bits(dev, 0x11, 0x01, 0x01);
|
|
|
|
/* get frontend address */
|
|
ret = regmap_read(dev->regmap, 0x29, &utmp);
|
|
if (ret)
|
|
goto err_kfree;
|
|
dev->dt_addr = ((utmp & 0x80) == 0) ? 0x42 >> 1 : 0x40 >> 1;
|
|
dev_dbg(&client->dev, "dt addr is 0x%02x\n", dev->dt_addr);
|
|
|
|
dev->dt_client = i2c_new_dummy_device(client->adapter,
|
|
dev->dt_addr);
|
|
if (!dev->dt_client) {
|
|
ret = -ENODEV;
|
|
goto err_kfree;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
err_kfree:
|
|
kfree(dev);
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ds3103_remove(struct i2c_client *client)
|
|
{
|
|
struct m88ds3103_dev *dev = i2c_get_clientdata(client);
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
if (dev->dt_client)
|
|
i2c_unregister_device(dev->dt_client);
|
|
|
|
i2c_mux_del_adapters(dev->muxc);
|
|
|
|
kfree(dev);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id m88ds3103_id_table[] = {
|
|
{"m88ds3103", M88DS3103_CHIPTYPE_3103},
|
|
{"m88rs6000", M88DS3103_CHIPTYPE_RS6000},
|
|
{"m88ds3103b", M88DS3103_CHIPTYPE_3103B},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, m88ds3103_id_table);
|
|
|
|
static struct i2c_driver m88ds3103_driver = {
|
|
.driver = {
|
|
.name = "m88ds3103",
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
.probe = m88ds3103_probe,
|
|
.remove = m88ds3103_remove,
|
|
.id_table = m88ds3103_id_table,
|
|
};
|
|
|
|
module_i2c_driver(m88ds3103_driver);
|
|
|
|
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
|
|
MODULE_DESCRIPTION("Montage Technology M88DS3103 DVB-S/S2 demodulator driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_FIRMWARE(M88DS3103_FIRMWARE);
|
|
MODULE_FIRMWARE(M88RS6000_FIRMWARE);
|
|
MODULE_FIRMWARE(M88DS3103B_FIRMWARE);
|