linux/arch/s390/kernel/perf_cpum_cf.c
Vasily Gorbik 4efd417f29 s390: raise minimum supported machine generation to z10
Machine generations up to z9 (released in May 2006) have been officially
out of service for several years now (z9 end of service - January 31, 2019).
No distributions build kernels supporting those old machine generations
anymore, except Debian, which seems to pick the oldest supported
generation. The team supporting Debian on s390 has been notified about
the change.

Raising minimum supported machine generation to z10 helps to reduce
maintenance cost and effectively remove code, which is not getting
enough testing coverage due to lack of older hardware and distributions
support. Besides that this unblocks some optimization opportunities and
allows to use wider instruction set in asm files for future features
implementation. Due to this change spectre mitigation and usercopy
implementations could be drastically simplified and many newer instructions
could be converted from ".insn" encoding to instruction names.

Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-10 15:58:17 +01:00

1510 lines
44 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Performance event support for s390x - CPU-measurement Counter Facility
*
* Copyright IBM Corp. 2012, 2021
* Author(s): Hendrik Brueckner <brueckner@linux.ibm.com>
* Thomas Richter <tmricht@linux.ibm.com>
*/
#define KMSG_COMPONENT "cpum_cf"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/kernel.h>
#include <linux/kernel_stat.h>
#include <linux/percpu.h>
#include <linux/notifier.h>
#include <linux/init.h>
#include <linux/export.h>
#include <linux/miscdevice.h>
#include <asm/cpu_mcf.h>
#include <asm/hwctrset.h>
#include <asm/debug.h>
static unsigned int cfdiag_cpu_speed; /* CPU speed for CF_DIAG trailer */
static debug_info_t *cf_dbg;
#define CF_DIAG_CTRSET_DEF 0xfeef /* Counter set header mark */
/* interval in seconds */
/* Counter sets are stored as data stream in a page sized memory buffer and
* exported to user space via raw data attached to the event sample data.
* Each counter set starts with an eight byte header consisting of:
* - a two byte eye catcher (0xfeef)
* - a one byte counter set number
* - a two byte counter set size (indicates the number of counters in this set)
* - a three byte reserved value (must be zero) to make the header the same
* size as a counter value.
* All counter values are eight byte in size.
*
* All counter sets are followed by a 64 byte trailer.
* The trailer consists of a:
* - flag field indicating valid fields when corresponding bit set
* - the counter facility first and second version number
* - the CPU speed if nonzero
* - the time stamp the counter sets have been collected
* - the time of day (TOD) base value
* - the machine type.
*
* The counter sets are saved when the process is prepared to be executed on a
* CPU and saved again when the process is going to be removed from a CPU.
* The difference of both counter sets are calculated and stored in the event
* sample data area.
*/
struct cf_ctrset_entry { /* CPU-M CF counter set entry (8 byte) */
unsigned int def:16; /* 0-15 Data Entry Format */
unsigned int set:16; /* 16-31 Counter set identifier */
unsigned int ctr:16; /* 32-47 Number of stored counters */
unsigned int res1:16; /* 48-63 Reserved */
};
struct cf_trailer_entry { /* CPU-M CF_DIAG trailer (64 byte) */
/* 0 - 7 */
union {
struct {
unsigned int clock_base:1; /* TOD clock base set */
unsigned int speed:1; /* CPU speed set */
/* Measurement alerts */
unsigned int mtda:1; /* Loss of MT ctr. data alert */
unsigned int caca:1; /* Counter auth. change alert */
unsigned int lcda:1; /* Loss of counter data alert */
};
unsigned long flags; /* 0-63 All indicators */
};
/* 8 - 15 */
unsigned int cfvn:16; /* 64-79 Ctr First Version */
unsigned int csvn:16; /* 80-95 Ctr Second Version */
unsigned int cpu_speed:32; /* 96-127 CPU speed */
/* 16 - 23 */
unsigned long timestamp; /* 128-191 Timestamp (TOD) */
/* 24 - 55 */
union {
struct {
unsigned long progusage1;
unsigned long progusage2;
unsigned long progusage3;
unsigned long tod_base;
};
unsigned long progusage[4];
};
/* 56 - 63 */
unsigned int mach_type:16; /* Machine type */
unsigned int res1:16; /* Reserved */
unsigned int res2:32; /* Reserved */
};
/* Create the trailer data at the end of a page. */
static void cfdiag_trailer(struct cf_trailer_entry *te)
{
struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
struct cpuid cpuid;
te->cfvn = cpuhw->info.cfvn; /* Counter version numbers */
te->csvn = cpuhw->info.csvn;
get_cpu_id(&cpuid); /* Machine type */
te->mach_type = cpuid.machine;
te->cpu_speed = cfdiag_cpu_speed;
if (te->cpu_speed)
te->speed = 1;
te->clock_base = 1; /* Save clock base */
te->tod_base = tod_clock_base.tod;
te->timestamp = get_tod_clock_fast();
}
/* Read a counter set. The counter set number determines the counter set and
* the CPUM-CF first and second version number determine the number of
* available counters in each counter set.
* Each counter set starts with header containing the counter set number and
* the number of eight byte counters.
*
* The functions returns the number of bytes occupied by this counter set
* including the header.
* If there is no counter in the counter set, this counter set is useless and
* zero is returned on this case.
*
* Note that the counter sets may not be enabled or active and the stcctm
* instruction might return error 3. Depending on error_ok value this is ok,
* for example when called from cpumf_pmu_start() call back function.
*/
static size_t cfdiag_getctrset(struct cf_ctrset_entry *ctrdata, int ctrset,
size_t room, bool error_ok)
{
struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
size_t ctrset_size, need = 0;
int rc = 3; /* Assume write failure */
ctrdata->def = CF_DIAG_CTRSET_DEF;
ctrdata->set = ctrset;
ctrdata->res1 = 0;
ctrset_size = cpum_cf_ctrset_size(ctrset, &cpuhw->info);
if (ctrset_size) { /* Save data */
need = ctrset_size * sizeof(u64) + sizeof(*ctrdata);
if (need <= room) {
rc = ctr_stcctm(ctrset, ctrset_size,
(u64 *)(ctrdata + 1));
}
if (rc != 3 || error_ok)
ctrdata->ctr = ctrset_size;
else
need = 0;
}
debug_sprintf_event(cf_dbg, 3,
"%s ctrset %d ctrset_size %zu cfvn %d csvn %d"
" need %zd rc %d\n", __func__, ctrset, ctrset_size,
cpuhw->info.cfvn, cpuhw->info.csvn, need, rc);
return need;
}
static const u64 cpumf_ctr_ctl[CPUMF_CTR_SET_MAX] = {
[CPUMF_CTR_SET_BASIC] = 0x02,
[CPUMF_CTR_SET_USER] = 0x04,
[CPUMF_CTR_SET_CRYPTO] = 0x08,
[CPUMF_CTR_SET_EXT] = 0x01,
[CPUMF_CTR_SET_MT_DIAG] = 0x20,
};
/* Read out all counter sets and save them in the provided data buffer.
* The last 64 byte host an artificial trailer entry.
*/
static size_t cfdiag_getctr(void *data, size_t sz, unsigned long auth,
bool error_ok)
{
struct cf_trailer_entry *trailer;
size_t offset = 0, done;
int i;
memset(data, 0, sz);
sz -= sizeof(*trailer); /* Always room for trailer */
for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
struct cf_ctrset_entry *ctrdata = data + offset;
if (!(auth & cpumf_ctr_ctl[i]))
continue; /* Counter set not authorized */
done = cfdiag_getctrset(ctrdata, i, sz - offset, error_ok);
offset += done;
}
trailer = data + offset;
cfdiag_trailer(trailer);
return offset + sizeof(*trailer);
}
/* Calculate the difference for each counter in a counter set. */
static void cfdiag_diffctrset(u64 *pstart, u64 *pstop, int counters)
{
for (; --counters >= 0; ++pstart, ++pstop)
if (*pstop >= *pstart)
*pstop -= *pstart;
else
*pstop = *pstart - *pstop + 1;
}
/* Scan the counter sets and calculate the difference of each counter
* in each set. The result is the increment of each counter during the
* period the counter set has been activated.
*
* Return true on success.
*/
static int cfdiag_diffctr(struct cpu_cf_events *cpuhw, unsigned long auth)
{
struct cf_trailer_entry *trailer_start, *trailer_stop;
struct cf_ctrset_entry *ctrstart, *ctrstop;
size_t offset = 0;
auth &= (1 << CPUMF_LCCTL_ENABLE_SHIFT) - 1;
do {
ctrstart = (struct cf_ctrset_entry *)(cpuhw->start + offset);
ctrstop = (struct cf_ctrset_entry *)(cpuhw->stop + offset);
if (memcmp(ctrstop, ctrstart, sizeof(*ctrstop))) {
pr_err_once("cpum_cf_diag counter set compare error "
"in set %i\n", ctrstart->set);
return 0;
}
auth &= ~cpumf_ctr_ctl[ctrstart->set];
if (ctrstart->def == CF_DIAG_CTRSET_DEF) {
cfdiag_diffctrset((u64 *)(ctrstart + 1),
(u64 *)(ctrstop + 1), ctrstart->ctr);
offset += ctrstart->ctr * sizeof(u64) +
sizeof(*ctrstart);
}
} while (ctrstart->def && auth);
/* Save time_stamp from start of event in stop's trailer */
trailer_start = (struct cf_trailer_entry *)(cpuhw->start + offset);
trailer_stop = (struct cf_trailer_entry *)(cpuhw->stop + offset);
trailer_stop->progusage[0] = trailer_start->timestamp;
return 1;
}
static enum cpumf_ctr_set get_counter_set(u64 event)
{
int set = CPUMF_CTR_SET_MAX;
if (event < 32)
set = CPUMF_CTR_SET_BASIC;
else if (event < 64)
set = CPUMF_CTR_SET_USER;
else if (event < 128)
set = CPUMF_CTR_SET_CRYPTO;
else if (event < 288)
set = CPUMF_CTR_SET_EXT;
else if (event >= 448 && event < 496)
set = CPUMF_CTR_SET_MT_DIAG;
return set;
}
static int validate_ctr_version(const struct hw_perf_event *hwc,
enum cpumf_ctr_set set)
{
struct cpu_cf_events *cpuhw;
int err = 0;
u16 mtdiag_ctl;
cpuhw = &get_cpu_var(cpu_cf_events);
/* check required version for counter sets */
switch (set) {
case CPUMF_CTR_SET_BASIC:
case CPUMF_CTR_SET_USER:
if (cpuhw->info.cfvn < 1)
err = -EOPNOTSUPP;
break;
case CPUMF_CTR_SET_CRYPTO:
if ((cpuhw->info.csvn >= 1 && cpuhw->info.csvn <= 5 &&
hwc->config > 79) ||
(cpuhw->info.csvn >= 6 && hwc->config > 83))
err = -EOPNOTSUPP;
break;
case CPUMF_CTR_SET_EXT:
if (cpuhw->info.csvn < 1)
err = -EOPNOTSUPP;
if ((cpuhw->info.csvn == 1 && hwc->config > 159) ||
(cpuhw->info.csvn == 2 && hwc->config > 175) ||
(cpuhw->info.csvn >= 3 && cpuhw->info.csvn <= 5
&& hwc->config > 255) ||
(cpuhw->info.csvn >= 6 && hwc->config > 287))
err = -EOPNOTSUPP;
break;
case CPUMF_CTR_SET_MT_DIAG:
if (cpuhw->info.csvn <= 3)
err = -EOPNOTSUPP;
/*
* MT-diagnostic counters are read-only. The counter set
* is automatically enabled and activated on all CPUs with
* multithreading (SMT). Deactivation of multithreading
* also disables the counter set. State changes are ignored
* by lcctl(). Because Linux controls SMT enablement through
* a kernel parameter only, the counter set is either disabled
* or enabled and active.
*
* Thus, the counters can only be used if SMT is on and the
* counter set is enabled and active.
*/
mtdiag_ctl = cpumf_ctr_ctl[CPUMF_CTR_SET_MT_DIAG];
if (!((cpuhw->info.auth_ctl & mtdiag_ctl) &&
(cpuhw->info.enable_ctl & mtdiag_ctl) &&
(cpuhw->info.act_ctl & mtdiag_ctl)))
err = -EOPNOTSUPP;
break;
case CPUMF_CTR_SET_MAX:
err = -EOPNOTSUPP;
}
put_cpu_var(cpu_cf_events);
return err;
}
static int validate_ctr_auth(const struct hw_perf_event *hwc)
{
struct cpu_cf_events *cpuhw;
int err = 0;
cpuhw = &get_cpu_var(cpu_cf_events);
/* Check authorization for cpu counter sets.
* If the particular CPU counter set is not authorized,
* return with -ENOENT in order to fall back to other
* PMUs that might suffice the event request.
*/
if (!(hwc->config_base & cpuhw->info.auth_ctl))
err = -ENOENT;
put_cpu_var(cpu_cf_events);
return err;
}
/*
* Change the CPUMF state to active.
* Enable and activate the CPU-counter sets according
* to the per-cpu control state.
*/
static void cpumf_pmu_enable(struct pmu *pmu)
{
struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
int err;
if (cpuhw->flags & PMU_F_ENABLED)
return;
err = lcctl(cpuhw->state | cpuhw->dev_state);
if (err) {
pr_err("Enabling the performance measuring unit "
"failed with rc=%x\n", err);
return;
}
cpuhw->flags |= PMU_F_ENABLED;
}
/*
* Change the CPUMF state to inactive.
* Disable and enable (inactive) the CPU-counter sets according
* to the per-cpu control state.
*/
static void cpumf_pmu_disable(struct pmu *pmu)
{
struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
int err;
u64 inactive;
if (!(cpuhw->flags & PMU_F_ENABLED))
return;
inactive = cpuhw->state & ~((1 << CPUMF_LCCTL_ENABLE_SHIFT) - 1);
inactive |= cpuhw->dev_state;
err = lcctl(inactive);
if (err) {
pr_err("Disabling the performance measuring unit "
"failed with rc=%x\n", err);
return;
}
cpuhw->flags &= ~PMU_F_ENABLED;
}
/* Number of perf events counting hardware events */
static atomic_t num_events = ATOMIC_INIT(0);
/* Used to avoid races in calling reserve/release_cpumf_hardware */
static DEFINE_MUTEX(pmc_reserve_mutex);
/* Release the PMU if event is the last perf event */
static void hw_perf_event_destroy(struct perf_event *event)
{
if (!atomic_add_unless(&num_events, -1, 1)) {
mutex_lock(&pmc_reserve_mutex);
if (atomic_dec_return(&num_events) == 0)
__kernel_cpumcf_end();
mutex_unlock(&pmc_reserve_mutex);
}
}
/* CPUMF <-> perf event mappings for kernel+userspace (basic set) */
static const int cpumf_generic_events_basic[] = {
[PERF_COUNT_HW_CPU_CYCLES] = 0,
[PERF_COUNT_HW_INSTRUCTIONS] = 1,
[PERF_COUNT_HW_CACHE_REFERENCES] = -1,
[PERF_COUNT_HW_CACHE_MISSES] = -1,
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = -1,
[PERF_COUNT_HW_BRANCH_MISSES] = -1,
[PERF_COUNT_HW_BUS_CYCLES] = -1,
};
/* CPUMF <-> perf event mappings for userspace (problem-state set) */
static const int cpumf_generic_events_user[] = {
[PERF_COUNT_HW_CPU_CYCLES] = 32,
[PERF_COUNT_HW_INSTRUCTIONS] = 33,
[PERF_COUNT_HW_CACHE_REFERENCES] = -1,
[PERF_COUNT_HW_CACHE_MISSES] = -1,
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = -1,
[PERF_COUNT_HW_BRANCH_MISSES] = -1,
[PERF_COUNT_HW_BUS_CYCLES] = -1,
};
static void cpumf_hw_inuse(void)
{
mutex_lock(&pmc_reserve_mutex);
if (atomic_inc_return(&num_events) == 1)
__kernel_cpumcf_begin();
mutex_unlock(&pmc_reserve_mutex);
}
static int __hw_perf_event_init(struct perf_event *event, unsigned int type)
{
struct perf_event_attr *attr = &event->attr;
struct hw_perf_event *hwc = &event->hw;
enum cpumf_ctr_set set;
int err = 0;
u64 ev;
switch (type) {
case PERF_TYPE_RAW:
/* Raw events are used to access counters directly,
* hence do not permit excludes */
if (attr->exclude_kernel || attr->exclude_user ||
attr->exclude_hv)
return -EOPNOTSUPP;
ev = attr->config;
break;
case PERF_TYPE_HARDWARE:
if (is_sampling_event(event)) /* No sampling support */
return -ENOENT;
ev = attr->config;
/* Count user space (problem-state) only */
if (!attr->exclude_user && attr->exclude_kernel) {
if (ev >= ARRAY_SIZE(cpumf_generic_events_user))
return -EOPNOTSUPP;
ev = cpumf_generic_events_user[ev];
/* No support for kernel space counters only */
} else if (!attr->exclude_kernel && attr->exclude_user) {
return -EOPNOTSUPP;
} else { /* Count user and kernel space */
if (ev >= ARRAY_SIZE(cpumf_generic_events_basic))
return -EOPNOTSUPP;
ev = cpumf_generic_events_basic[ev];
}
break;
default:
return -ENOENT;
}
if (ev == -1)
return -ENOENT;
if (ev > PERF_CPUM_CF_MAX_CTR)
return -ENOENT;
/* Obtain the counter set to which the specified counter belongs */
set = get_counter_set(ev);
switch (set) {
case CPUMF_CTR_SET_BASIC:
case CPUMF_CTR_SET_USER:
case CPUMF_CTR_SET_CRYPTO:
case CPUMF_CTR_SET_EXT:
case CPUMF_CTR_SET_MT_DIAG:
/*
* Use the hardware perf event structure to store the
* counter number in the 'config' member and the counter
* set number in the 'config_base' as bit mask.
* It is later used to enable/disable the counter(s).
*/
hwc->config = ev;
hwc->config_base = cpumf_ctr_ctl[set];
break;
case CPUMF_CTR_SET_MAX:
/* The counter could not be associated to a counter set */
return -EINVAL;
}
/* Initialize for using the CPU-measurement counter facility */
cpumf_hw_inuse();
event->destroy = hw_perf_event_destroy;
/* Finally, validate version and authorization of the counter set */
err = validate_ctr_auth(hwc);
if (!err)
err = validate_ctr_version(hwc, set);
return err;
}
static int cpumf_pmu_event_init(struct perf_event *event)
{
unsigned int type = event->attr.type;
int err;
if (type == PERF_TYPE_HARDWARE || type == PERF_TYPE_RAW)
err = __hw_perf_event_init(event, type);
else if (event->pmu->type == type)
/* Registered as unknown PMU */
err = __hw_perf_event_init(event, PERF_TYPE_RAW);
else
return -ENOENT;
if (unlikely(err) && event->destroy)
event->destroy(event);
return err;
}
static int hw_perf_event_reset(struct perf_event *event)
{
u64 prev, new;
int err;
do {
prev = local64_read(&event->hw.prev_count);
err = ecctr(event->hw.config, &new);
if (err) {
if (err != 3)
break;
/* The counter is not (yet) available. This
* might happen if the counter set to which
* this counter belongs is in the disabled
* state.
*/
new = 0;
}
} while (local64_cmpxchg(&event->hw.prev_count, prev, new) != prev);
return err;
}
static void hw_perf_event_update(struct perf_event *event)
{
u64 prev, new, delta;
int err;
do {
prev = local64_read(&event->hw.prev_count);
err = ecctr(event->hw.config, &new);
if (err)
return;
} while (local64_cmpxchg(&event->hw.prev_count, prev, new) != prev);
delta = (prev <= new) ? new - prev
: (-1ULL - prev) + new + 1; /* overflow */
local64_add(delta, &event->count);
}
static void cpumf_pmu_read(struct perf_event *event)
{
if (event->hw.state & PERF_HES_STOPPED)
return;
hw_perf_event_update(event);
}
static void cpumf_pmu_start(struct perf_event *event, int flags)
{
struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
struct hw_perf_event *hwc = &event->hw;
int i;
if (!(hwc->state & PERF_HES_STOPPED))
return;
hwc->state = 0;
/* (Re-)enable and activate the counter set */
ctr_set_enable(&cpuhw->state, hwc->config_base);
ctr_set_start(&cpuhw->state, hwc->config_base);
/* The counter set to which this counter belongs can be already active.
* Because all counters in a set are active, the event->hw.prev_count
* needs to be synchronized. At this point, the counter set can be in
* the inactive or disabled state.
*/
if (hwc->config == PERF_EVENT_CPUM_CF_DIAG) {
cpuhw->usedss = cfdiag_getctr(cpuhw->start,
sizeof(cpuhw->start),
hwc->config_base, true);
} else {
hw_perf_event_reset(event);
}
/* Increment refcount for counter sets */
for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i)
if ((hwc->config_base & cpumf_ctr_ctl[i]))
atomic_inc(&cpuhw->ctr_set[i]);
}
/* Create perf event sample with the counter sets as raw data. The sample
* is then pushed to the event subsystem and the function checks for
* possible event overflows. If an event overflow occurs, the PMU is
* stopped.
*
* Return non-zero if an event overflow occurred.
*/
static int cfdiag_push_sample(struct perf_event *event,
struct cpu_cf_events *cpuhw)
{
struct perf_sample_data data;
struct perf_raw_record raw;
struct pt_regs regs;
int overflow;
/* Setup perf sample */
perf_sample_data_init(&data, 0, event->hw.last_period);
memset(&regs, 0, sizeof(regs));
memset(&raw, 0, sizeof(raw));
if (event->attr.sample_type & PERF_SAMPLE_CPU)
data.cpu_entry.cpu = event->cpu;
if (event->attr.sample_type & PERF_SAMPLE_RAW) {
raw.frag.size = cpuhw->usedss;
raw.frag.data = cpuhw->stop;
raw.size = raw.frag.size;
data.raw = &raw;
}
overflow = perf_event_overflow(event, &data, &regs);
debug_sprintf_event(cf_dbg, 3,
"%s event %#llx sample_type %#llx raw %d ov %d\n",
__func__, event->hw.config,
event->attr.sample_type, raw.size, overflow);
if (overflow)
event->pmu->stop(event, 0);
perf_event_update_userpage(event);
return overflow;
}
static void cpumf_pmu_stop(struct perf_event *event, int flags)
{
struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
struct hw_perf_event *hwc = &event->hw;
int i;
if (!(hwc->state & PERF_HES_STOPPED)) {
/* Decrement reference count for this counter set and if this
* is the last used counter in the set, clear activation
* control and set the counter set state to inactive.
*/
for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
if (!(hwc->config_base & cpumf_ctr_ctl[i]))
continue;
if (!atomic_dec_return(&cpuhw->ctr_set[i]))
ctr_set_stop(&cpuhw->state, cpumf_ctr_ctl[i]);
}
hwc->state |= PERF_HES_STOPPED;
}
if ((flags & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) {
if (hwc->config == PERF_EVENT_CPUM_CF_DIAG) {
local64_inc(&event->count);
cpuhw->usedss = cfdiag_getctr(cpuhw->stop,
sizeof(cpuhw->stop),
event->hw.config_base,
false);
if (cfdiag_diffctr(cpuhw, event->hw.config_base))
cfdiag_push_sample(event, cpuhw);
} else if (cpuhw->flags & PMU_F_RESERVED) {
/* Only update when PMU not hotplugged off */
hw_perf_event_update(event);
}
hwc->state |= PERF_HES_UPTODATE;
}
}
static int cpumf_pmu_add(struct perf_event *event, int flags)
{
struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
ctr_set_enable(&cpuhw->state, event->hw.config_base);
event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
if (flags & PERF_EF_START)
cpumf_pmu_start(event, PERF_EF_RELOAD);
return 0;
}
static void cpumf_pmu_del(struct perf_event *event, int flags)
{
struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
int i;
cpumf_pmu_stop(event, PERF_EF_UPDATE);
/* Check if any counter in the counter set is still used. If not used,
* change the counter set to the disabled state. This also clears the
* content of all counters in the set.
*
* When a new perf event has been added but not yet started, this can
* clear enable control and resets all counters in a set. Therefore,
* cpumf_pmu_start() always has to reenable a counter set.
*/
for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i)
if (!atomic_read(&cpuhw->ctr_set[i]))
ctr_set_disable(&cpuhw->state, cpumf_ctr_ctl[i]);
}
/* Performance monitoring unit for s390x */
static struct pmu cpumf_pmu = {
.task_ctx_nr = perf_sw_context,
.capabilities = PERF_PMU_CAP_NO_INTERRUPT,
.pmu_enable = cpumf_pmu_enable,
.pmu_disable = cpumf_pmu_disable,
.event_init = cpumf_pmu_event_init,
.add = cpumf_pmu_add,
.del = cpumf_pmu_del,
.start = cpumf_pmu_start,
.stop = cpumf_pmu_stop,
.read = cpumf_pmu_read,
};
static int cfset_init(void);
static int __init cpumf_pmu_init(void)
{
int rc;
if (!kernel_cpumcf_avail())
return -ENODEV;
/* Setup s390dbf facility */
cf_dbg = debug_register(KMSG_COMPONENT, 2, 1, 128);
if (!cf_dbg) {
pr_err("Registration of s390dbf(cpum_cf) failed\n");
return -ENOMEM;
}
debug_register_view(cf_dbg, &debug_sprintf_view);
cpumf_pmu.attr_groups = cpumf_cf_event_group();
rc = perf_pmu_register(&cpumf_pmu, "cpum_cf", -1);
if (rc) {
debug_unregister_view(cf_dbg, &debug_sprintf_view);
debug_unregister(cf_dbg);
pr_err("Registering the cpum_cf PMU failed with rc=%i\n", rc);
} else if (stccm_avail()) { /* Setup counter set device */
cfset_init();
}
return rc;
}
/* Support for the CPU Measurement Facility counter set extraction using
* device /dev/hwctr. This allows user space programs to extract complete
* counter set via normal file operations.
*/
static atomic_t cfset_opencnt = ATOMIC_INIT(0); /* Access count */
static DEFINE_MUTEX(cfset_ctrset_mutex);/* Synchronize access to hardware */
struct cfset_call_on_cpu_parm { /* Parm struct for smp_call_on_cpu */
unsigned int sets; /* Counter set bit mask */
atomic_t cpus_ack; /* # CPUs successfully executed func */
};
static struct cfset_session { /* CPUs and counter set bit mask */
struct list_head head; /* Head of list of active processes */
} cfset_session = {
.head = LIST_HEAD_INIT(cfset_session.head)
};
struct cfset_request { /* CPUs and counter set bit mask */
unsigned long ctrset; /* Bit mask of counter set to read */
cpumask_t mask; /* CPU mask to read from */
struct list_head node; /* Chain to cfset_session.head */
};
static void cfset_session_init(void)
{
INIT_LIST_HEAD(&cfset_session.head);
}
/* Remove current request from global bookkeeping. Maintain a counter set bit
* mask on a per CPU basis.
* Done in process context under mutex protection.
*/
static void cfset_session_del(struct cfset_request *p)
{
list_del(&p->node);
}
/* Add current request to global bookkeeping. Maintain a counter set bit mask
* on a per CPU basis.
* Done in process context under mutex protection.
*/
static void cfset_session_add(struct cfset_request *p)
{
list_add(&p->node, &cfset_session.head);
}
/* The /dev/hwctr device access uses PMU_F_IN_USE to mark the device access
* path is currently used.
* The cpu_cf_events::dev_state is used to denote counter sets in use by this
* interface. It is always or'ed in. If this interface is not active, its
* value is zero and no additional counter sets will be included.
*
* The cpu_cf_events::state is used by the perf_event_open SVC and remains
* unchanged.
*
* perf_pmu_enable() and perf_pmu_enable() and its call backs
* cpumf_pmu_enable() and cpumf_pmu_disable() are called by the
* performance measurement subsystem to enable per process
* CPU Measurement counter facility.
* The XXX_enable() and XXX_disable functions are used to turn off
* x86 performance monitoring interrupt (PMI) during scheduling.
* s390 uses these calls to temporarily stop and resume the active CPU
* counters sets during scheduling.
*
* We do allow concurrent access of perf_event_open() SVC and /dev/hwctr
* device access. The perf_event_open() SVC interface makes a lot of effort
* to only run the counters while the calling process is actively scheduled
* to run.
* When /dev/hwctr interface is also used at the same time, the counter sets
* will keep running, even when the process is scheduled off a CPU.
* However this is not a problem and does not lead to wrong counter values
* for the perf_event_open() SVC. The current counter value will be recorded
* during schedule-in. At schedule-out time the current counter value is
* extracted again and the delta is calculated and added to the event.
*/
/* Stop all counter sets via ioctl interface */
static void cfset_ioctl_off(void *parm)
{
struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
struct cfset_call_on_cpu_parm *p = parm;
int rc;
/* Check if any counter set used by /dev/hwc */
for (rc = CPUMF_CTR_SET_BASIC; rc < CPUMF_CTR_SET_MAX; ++rc)
if ((p->sets & cpumf_ctr_ctl[rc])) {
if (!atomic_dec_return(&cpuhw->ctr_set[rc])) {
ctr_set_disable(&cpuhw->dev_state,
cpumf_ctr_ctl[rc]);
ctr_set_stop(&cpuhw->dev_state,
cpumf_ctr_ctl[rc]);
}
}
/* Keep perf_event_open counter sets */
rc = lcctl(cpuhw->dev_state | cpuhw->state);
if (rc)
pr_err("Counter set stop %#llx of /dev/%s failed rc=%i\n",
cpuhw->state, S390_HWCTR_DEVICE, rc);
if (!cpuhw->dev_state)
cpuhw->flags &= ~PMU_F_IN_USE;
debug_sprintf_event(cf_dbg, 4, "%s rc %d state %#llx dev_state %#llx\n",
__func__, rc, cpuhw->state, cpuhw->dev_state);
}
/* Start counter sets on particular CPU */
static void cfset_ioctl_on(void *parm)
{
struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
struct cfset_call_on_cpu_parm *p = parm;
int rc;
cpuhw->flags |= PMU_F_IN_USE;
ctr_set_enable(&cpuhw->dev_state, p->sets);
ctr_set_start(&cpuhw->dev_state, p->sets);
for (rc = CPUMF_CTR_SET_BASIC; rc < CPUMF_CTR_SET_MAX; ++rc)
if ((p->sets & cpumf_ctr_ctl[rc]))
atomic_inc(&cpuhw->ctr_set[rc]);
rc = lcctl(cpuhw->dev_state | cpuhw->state); /* Start counter sets */
if (!rc)
atomic_inc(&p->cpus_ack);
else
pr_err("Counter set start %#llx of /dev/%s failed rc=%i\n",
cpuhw->dev_state | cpuhw->state, S390_HWCTR_DEVICE, rc);
debug_sprintf_event(cf_dbg, 4, "%s rc %d state %#llx dev_state %#llx\n",
__func__, rc, cpuhw->state, cpuhw->dev_state);
}
static void cfset_release_cpu(void *p)
{
struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
int rc;
debug_sprintf_event(cf_dbg, 4, "%s state %#llx dev_state %#llx\n",
__func__, cpuhw->state, cpuhw->dev_state);
cpuhw->dev_state = 0;
rc = lcctl(cpuhw->state); /* Keep perf_event_open counter sets */
if (rc)
pr_err("Counter set release %#llx of /dev/%s failed rc=%i\n",
cpuhw->state, S390_HWCTR_DEVICE, rc);
}
/* This modifies the process CPU mask to adopt it to the currently online
* CPUs. Offline CPUs can not be addresses. This call terminates the access
* and is usually followed by close() or a new iotcl(..., START, ...) which
* creates a new request structure.
*/
static void cfset_all_stop(struct cfset_request *req)
{
struct cfset_call_on_cpu_parm p = {
.sets = req->ctrset,
};
cpumask_and(&req->mask, &req->mask, cpu_online_mask);
on_each_cpu_mask(&req->mask, cfset_ioctl_off, &p, 1);
}
/* Release function is also called when application gets terminated without
* doing a proper ioctl(..., S390_HWCTR_STOP, ...) command.
*/
static int cfset_release(struct inode *inode, struct file *file)
{
mutex_lock(&cfset_ctrset_mutex);
/* Open followed by close/exit has no private_data */
if (file->private_data) {
cfset_all_stop(file->private_data);
cfset_session_del(file->private_data);
kfree(file->private_data);
file->private_data = NULL;
}
if (!atomic_dec_return(&cfset_opencnt))
on_each_cpu(cfset_release_cpu, NULL, 1);
mutex_unlock(&cfset_ctrset_mutex);
hw_perf_event_destroy(NULL);
return 0;
}
static int cfset_open(struct inode *inode, struct file *file)
{
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
mutex_lock(&cfset_ctrset_mutex);
if (atomic_inc_return(&cfset_opencnt) == 1)
cfset_session_init();
mutex_unlock(&cfset_ctrset_mutex);
cpumf_hw_inuse();
file->private_data = NULL;
/* nonseekable_open() never fails */
return nonseekable_open(inode, file);
}
static int cfset_all_start(struct cfset_request *req)
{
struct cfset_call_on_cpu_parm p = {
.sets = req->ctrset,
.cpus_ack = ATOMIC_INIT(0),
};
cpumask_var_t mask;
int rc = 0;
if (!alloc_cpumask_var(&mask, GFP_KERNEL))
return -ENOMEM;
cpumask_and(mask, &req->mask, cpu_online_mask);
on_each_cpu_mask(mask, cfset_ioctl_on, &p, 1);
if (atomic_read(&p.cpus_ack) != cpumask_weight(mask)) {
on_each_cpu_mask(mask, cfset_ioctl_off, &p, 1);
rc = -EIO;
debug_sprintf_event(cf_dbg, 4, "%s CPUs missing", __func__);
}
free_cpumask_var(mask);
return rc;
}
/* Return the maximum required space for all possible CPUs in case one
* CPU will be onlined during the START, READ, STOP cycles.
* To find out the size of the counter sets, any one CPU will do. They
* all have the same counter sets.
*/
static size_t cfset_needspace(unsigned int sets)
{
struct cpu_cf_events *cpuhw = get_cpu_ptr(&cpu_cf_events);
size_t bytes = 0;
int i;
for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
if (!(sets & cpumf_ctr_ctl[i]))
continue;
bytes += cpum_cf_ctrset_size(i, &cpuhw->info) * sizeof(u64) +
sizeof(((struct s390_ctrset_setdata *)0)->set) +
sizeof(((struct s390_ctrset_setdata *)0)->no_cnts);
}
bytes = sizeof(((struct s390_ctrset_read *)0)->no_cpus) + nr_cpu_ids *
(bytes + sizeof(((struct s390_ctrset_cpudata *)0)->cpu_nr) +
sizeof(((struct s390_ctrset_cpudata *)0)->no_sets));
put_cpu_ptr(&cpu_cf_events);
return bytes;
}
static int cfset_all_copy(unsigned long arg, cpumask_t *mask)
{
struct s390_ctrset_read __user *ctrset_read;
unsigned int cpu, cpus, rc;
void __user *uptr;
ctrset_read = (struct s390_ctrset_read __user *)arg;
uptr = ctrset_read->data;
for_each_cpu(cpu, mask) {
struct cpu_cf_events *cpuhw = per_cpu_ptr(&cpu_cf_events, cpu);
struct s390_ctrset_cpudata __user *ctrset_cpudata;
ctrset_cpudata = uptr;
rc = put_user(cpu, &ctrset_cpudata->cpu_nr);
rc |= put_user(cpuhw->sets, &ctrset_cpudata->no_sets);
rc |= copy_to_user(ctrset_cpudata->data, cpuhw->data,
cpuhw->used);
if (rc)
return -EFAULT;
uptr += sizeof(struct s390_ctrset_cpudata) + cpuhw->used;
cond_resched();
}
cpus = cpumask_weight(mask);
if (put_user(cpus, &ctrset_read->no_cpus))
return -EFAULT;
debug_sprintf_event(cf_dbg, 4, "%s copied %ld\n", __func__,
uptr - (void __user *)ctrset_read->data);
return 0;
}
static size_t cfset_cpuset_read(struct s390_ctrset_setdata *p, int ctrset,
int ctrset_size, size_t room)
{
size_t need = 0;
int rc = -1;
need = sizeof(*p) + sizeof(u64) * ctrset_size;
if (need <= room) {
p->set = cpumf_ctr_ctl[ctrset];
p->no_cnts = ctrset_size;
rc = ctr_stcctm(ctrset, ctrset_size, (u64 *)p->cv);
if (rc == 3) /* Nothing stored */
need = 0;
}
return need;
}
/* Read all counter sets. */
static void cfset_cpu_read(void *parm)
{
struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
struct cfset_call_on_cpu_parm *p = parm;
int set, set_size;
size_t space;
/* No data saved yet */
cpuhw->used = 0;
cpuhw->sets = 0;
memset(cpuhw->data, 0, sizeof(cpuhw->data));
/* Scan the counter sets */
for (set = CPUMF_CTR_SET_BASIC; set < CPUMF_CTR_SET_MAX; ++set) {
struct s390_ctrset_setdata *sp = (void *)cpuhw->data +
cpuhw->used;
if (!(p->sets & cpumf_ctr_ctl[set]))
continue; /* Counter set not in list */
set_size = cpum_cf_ctrset_size(set, &cpuhw->info);
space = sizeof(cpuhw->data) - cpuhw->used;
space = cfset_cpuset_read(sp, set, set_size, space);
if (space) {
cpuhw->used += space;
cpuhw->sets += 1;
}
}
debug_sprintf_event(cf_dbg, 4, "%s sets %d used %zd\n", __func__,
cpuhw->sets, cpuhw->used);
}
static int cfset_all_read(unsigned long arg, struct cfset_request *req)
{
struct cfset_call_on_cpu_parm p;
cpumask_var_t mask;
int rc;
if (!alloc_cpumask_var(&mask, GFP_KERNEL))
return -ENOMEM;
p.sets = req->ctrset;
cpumask_and(mask, &req->mask, cpu_online_mask);
on_each_cpu_mask(mask, cfset_cpu_read, &p, 1);
rc = cfset_all_copy(arg, mask);
free_cpumask_var(mask);
return rc;
}
static long cfset_ioctl_read(unsigned long arg, struct cfset_request *req)
{
struct s390_ctrset_read read;
int ret = -ENODATA;
if (req && req->ctrset) {
if (copy_from_user(&read, (char __user *)arg, sizeof(read)))
return -EFAULT;
ret = cfset_all_read(arg, req);
}
return ret;
}
static long cfset_ioctl_stop(struct file *file)
{
struct cfset_request *req = file->private_data;
int ret = -ENXIO;
if (req) {
cfset_all_stop(req);
cfset_session_del(req);
kfree(req);
file->private_data = NULL;
ret = 0;
}
return ret;
}
static long cfset_ioctl_start(unsigned long arg, struct file *file)
{
struct s390_ctrset_start __user *ustart;
struct s390_ctrset_start start;
struct cfset_request *preq;
void __user *umask;
unsigned int len;
int ret = 0;
size_t need;
if (file->private_data)
return -EBUSY;
ustart = (struct s390_ctrset_start __user *)arg;
if (copy_from_user(&start, ustart, sizeof(start)))
return -EFAULT;
if (start.version != S390_HWCTR_START_VERSION)
return -EINVAL;
if (start.counter_sets & ~(cpumf_ctr_ctl[CPUMF_CTR_SET_BASIC] |
cpumf_ctr_ctl[CPUMF_CTR_SET_USER] |
cpumf_ctr_ctl[CPUMF_CTR_SET_CRYPTO] |
cpumf_ctr_ctl[CPUMF_CTR_SET_EXT] |
cpumf_ctr_ctl[CPUMF_CTR_SET_MT_DIAG]))
return -EINVAL; /* Invalid counter set */
if (!start.counter_sets)
return -EINVAL; /* No counter set at all? */
preq = kzalloc(sizeof(*preq), GFP_KERNEL);
if (!preq)
return -ENOMEM;
cpumask_clear(&preq->mask);
len = min_t(u64, start.cpumask_len, cpumask_size());
umask = (void __user *)start.cpumask;
if (copy_from_user(&preq->mask, umask, len)) {
kfree(preq);
return -EFAULT;
}
if (cpumask_empty(&preq->mask)) {
kfree(preq);
return -EINVAL;
}
need = cfset_needspace(start.counter_sets);
if (put_user(need, &ustart->data_bytes)) {
kfree(preq);
return -EFAULT;
}
preq->ctrset = start.counter_sets;
ret = cfset_all_start(preq);
if (!ret) {
cfset_session_add(preq);
file->private_data = preq;
debug_sprintf_event(cf_dbg, 4, "%s set %#lx need %ld ret %d\n",
__func__, preq->ctrset, need, ret);
} else {
kfree(preq);
}
return ret;
}
/* Entry point to the /dev/hwctr device interface.
* The ioctl system call supports three subcommands:
* S390_HWCTR_START: Start the specified counter sets on a CPU list. The
* counter set keeps running until explicitly stopped. Returns the number
* of bytes needed to store the counter values. If another S390_HWCTR_START
* ioctl subcommand is called without a previous S390_HWCTR_STOP stop
* command on the same file descriptor, -EBUSY is returned.
* S390_HWCTR_READ: Read the counter set values from specified CPU list given
* with the S390_HWCTR_START command.
* S390_HWCTR_STOP: Stops the counter sets on the CPU list given with the
* previous S390_HWCTR_START subcommand.
*/
static long cfset_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
int ret;
cpus_read_lock();
mutex_lock(&cfset_ctrset_mutex);
switch (cmd) {
case S390_HWCTR_START:
ret = cfset_ioctl_start(arg, file);
break;
case S390_HWCTR_STOP:
ret = cfset_ioctl_stop(file);
break;
case S390_HWCTR_READ:
ret = cfset_ioctl_read(arg, file->private_data);
break;
default:
ret = -ENOTTY;
break;
}
mutex_unlock(&cfset_ctrset_mutex);
cpus_read_unlock();
return ret;
}
static const struct file_operations cfset_fops = {
.owner = THIS_MODULE,
.open = cfset_open,
.release = cfset_release,
.unlocked_ioctl = cfset_ioctl,
.compat_ioctl = cfset_ioctl,
.llseek = no_llseek
};
static struct miscdevice cfset_dev = {
.name = S390_HWCTR_DEVICE,
.minor = MISC_DYNAMIC_MINOR,
.fops = &cfset_fops,
};
/* Hotplug add of a CPU. Scan through all active processes and add
* that CPU to the list of CPUs supplied with ioctl(..., START, ...).
*/
int cfset_online_cpu(unsigned int cpu)
{
struct cfset_call_on_cpu_parm p;
struct cfset_request *rp;
mutex_lock(&cfset_ctrset_mutex);
if (!list_empty(&cfset_session.head)) {
list_for_each_entry(rp, &cfset_session.head, node) {
p.sets = rp->ctrset;
cfset_ioctl_on(&p);
cpumask_set_cpu(cpu, &rp->mask);
}
}
mutex_unlock(&cfset_ctrset_mutex);
return 0;
}
/* Hotplug remove of a CPU. Scan through all active processes and clear
* that CPU from the list of CPUs supplied with ioctl(..., START, ...).
*/
int cfset_offline_cpu(unsigned int cpu)
{
struct cfset_call_on_cpu_parm p;
struct cfset_request *rp;
mutex_lock(&cfset_ctrset_mutex);
if (!list_empty(&cfset_session.head)) {
list_for_each_entry(rp, &cfset_session.head, node) {
p.sets = rp->ctrset;
cfset_ioctl_off(&p);
cpumask_clear_cpu(cpu, &rp->mask);
}
}
mutex_unlock(&cfset_ctrset_mutex);
return 0;
}
static void cfdiag_read(struct perf_event *event)
{
debug_sprintf_event(cf_dbg, 3, "%s event %#llx count %ld\n", __func__,
event->attr.config, local64_read(&event->count));
}
static int get_authctrsets(void)
{
struct cpu_cf_events *cpuhw;
unsigned long auth = 0;
enum cpumf_ctr_set i;
cpuhw = &get_cpu_var(cpu_cf_events);
for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
if (cpuhw->info.auth_ctl & cpumf_ctr_ctl[i])
auth |= cpumf_ctr_ctl[i];
}
put_cpu_var(cpu_cf_events);
return auth;
}
/* Setup the event. Test for authorized counter sets and only include counter
* sets which are authorized at the time of the setup. Including unauthorized
* counter sets result in specification exception (and panic).
*/
static int cfdiag_event_init2(struct perf_event *event)
{
struct perf_event_attr *attr = &event->attr;
int err = 0;
/* Set sample_period to indicate sampling */
event->hw.config = attr->config;
event->hw.sample_period = attr->sample_period;
local64_set(&event->hw.period_left, event->hw.sample_period);
local64_set(&event->count, 0);
event->hw.last_period = event->hw.sample_period;
/* Add all authorized counter sets to config_base. The
* the hardware init function is either called per-cpu or just once
* for all CPUS (event->cpu == -1). This depends on the whether
* counting is started for all CPUs or on a per workload base where
* the perf event moves from one CPU to another CPU.
* Checking the authorization on any CPU is fine as the hardware
* applies the same authorization settings to all CPUs.
*/
event->hw.config_base = get_authctrsets();
/* No authorized counter sets, nothing to count/sample */
if (!event->hw.config_base)
err = -EINVAL;
debug_sprintf_event(cf_dbg, 5, "%s err %d config_base %#lx\n",
__func__, err, event->hw.config_base);
return err;
}
static int cfdiag_event_init(struct perf_event *event)
{
struct perf_event_attr *attr = &event->attr;
int err = -ENOENT;
if (event->attr.config != PERF_EVENT_CPUM_CF_DIAG ||
event->attr.type != event->pmu->type)
goto out;
/* Raw events are used to access counters directly,
* hence do not permit excludes.
* This event is useless without PERF_SAMPLE_RAW to return counter set
* values as raw data.
*/
if (attr->exclude_kernel || attr->exclude_user || attr->exclude_hv ||
!(attr->sample_type & (PERF_SAMPLE_CPU | PERF_SAMPLE_RAW))) {
err = -EOPNOTSUPP;
goto out;
}
/* Initialize for using the CPU-measurement counter facility */
cpumf_hw_inuse();
event->destroy = hw_perf_event_destroy;
err = cfdiag_event_init2(event);
if (unlikely(err))
event->destroy(event);
out:
return err;
}
/* Create cf_diag/events/CF_DIAG event sysfs file. This counter is used
* to collect the complete counter sets for a scheduled process. Target
* are complete counter sets attached as raw data to the artificial event.
* This results in complete counter sets available when a process is
* scheduled. Contains the delta of every counter while the process was
* running.
*/
CPUMF_EVENT_ATTR(CF_DIAG, CF_DIAG, PERF_EVENT_CPUM_CF_DIAG);
static struct attribute *cfdiag_events_attr[] = {
CPUMF_EVENT_PTR(CF_DIAG, CF_DIAG),
NULL,
};
PMU_FORMAT_ATTR(event, "config:0-63");
static struct attribute *cfdiag_format_attr[] = {
&format_attr_event.attr,
NULL,
};
static struct attribute_group cfdiag_events_group = {
.name = "events",
.attrs = cfdiag_events_attr,
};
static struct attribute_group cfdiag_format_group = {
.name = "format",
.attrs = cfdiag_format_attr,
};
static const struct attribute_group *cfdiag_attr_groups[] = {
&cfdiag_events_group,
&cfdiag_format_group,
NULL,
};
/* Performance monitoring unit for event CF_DIAG. Since this event
* is also started and stopped via the perf_event_open() system call, use
* the same event enable/disable call back functions. They do not
* have a pointer to the perf_event strcture as first parameter.
*
* The functions XXX_add, XXX_del, XXX_start and XXX_stop are also common.
* Reuse them and distinguish the event (always first parameter) via
* 'config' member.
*/
static struct pmu cf_diag = {
.task_ctx_nr = perf_sw_context,
.event_init = cfdiag_event_init,
.pmu_enable = cpumf_pmu_enable,
.pmu_disable = cpumf_pmu_disable,
.add = cpumf_pmu_add,
.del = cpumf_pmu_del,
.start = cpumf_pmu_start,
.stop = cpumf_pmu_stop,
.read = cfdiag_read,
.attr_groups = cfdiag_attr_groups
};
/* Calculate memory needed to store all counter sets together with header and
* trailer data. This is independent of the counter set authorization which
* can vary depending on the configuration.
*/
static size_t cfdiag_maxsize(struct cpumf_ctr_info *info)
{
size_t max_size = sizeof(struct cf_trailer_entry);
enum cpumf_ctr_set i;
for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
size_t size = cpum_cf_ctrset_size(i, info);
if (size)
max_size += size * sizeof(u64) +
sizeof(struct cf_ctrset_entry);
}
return max_size;
}
/* Get the CPU speed, try sampling facility first and CPU attributes second. */
static void cfdiag_get_cpu_speed(void)
{
unsigned long mhz;
if (cpum_sf_avail()) { /* Sampling facility first */
struct hws_qsi_info_block si;
memset(&si, 0, sizeof(si));
if (!qsi(&si)) {
cfdiag_cpu_speed = si.cpu_speed;
return;
}
}
/* Fallback: CPU speed extract static part. Used in case
* CPU Measurement Sampling Facility is turned off.
*/
mhz = __ecag(ECAG_CPU_ATTRIBUTE, 0);
if (mhz != -1UL)
cfdiag_cpu_speed = mhz & 0xffffffff;
}
static int cfset_init(void)
{
struct cpumf_ctr_info info;
size_t need;
int rc;
if (qctri(&info))
return -ENODEV;
cfdiag_get_cpu_speed();
/* Make sure the counter set data fits into predefined buffer. */
need = cfdiag_maxsize(&info);
if (need > sizeof(((struct cpu_cf_events *)0)->start)) {
pr_err("Insufficient memory for PMU(cpum_cf_diag) need=%zu\n",
need);
return -ENOMEM;
}
rc = misc_register(&cfset_dev);
if (rc) {
pr_err("Registration of /dev/%s failed rc=%i\n",
cfset_dev.name, rc);
goto out;
}
rc = perf_pmu_register(&cf_diag, "cpum_cf_diag", -1);
if (rc) {
misc_deregister(&cfset_dev);
pr_err("Registration of PMU(cpum_cf_diag) failed with rc=%i\n",
rc);
}
out:
return rc;
}
device_initcall(cpumf_pmu_init);