Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-16 16:12:52 +00:00
Code Issues Packages Projects Releases Wiki Activity
6ea24cf79e
linux/drivers/input/misc/pmic8xxx-pwrkey.c
Stephen Boyd eda5ecc0a6 Input: pmic8xxx-pwrkey - fix algorithm for converting trigger delay 
The trigger delay algorithm that converts from microseconds to
the register value looks incorrect. According to most of the PMIC
documentation, the equation is

	delay (Seconds) = (1 / 1024) * 2 ^ (x + 4)

except for one case where the documentation looks to have a
formatting issue and the equation looks like

	delay (Seconds) = (1 / 1024) * 2 x + 4

Most likely this driver was written with the improper
documentation to begin with. According to the downstream sources
the valid delays are from 2 seconds to 1/64 second, and the
latter equation just doesn't make sense for that. Let's fix the
algorithm and the range check to match the documentation and the
downstream sources.

Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: 92d57a73e4 ("input: Add support for Qualcomm PMIC8XXX power key")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-17 05:24:53 -07:00

471 lines
13 KiB
C
Raw Blame History

/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/log2.h>
#include <linux/of.h>
#include <linux/of_device.h>
#define PON_CNTL_1 0x1C
#define PON_CNTL_PULL_UP BIT(7)
#define PON_CNTL_TRIG_DELAY_MASK (0x7)
#define PON_CNTL_1_PULL_UP_EN 0xe0
#define PON_CNTL_1_USB_PWR_EN 0x10
#define PON_CNTL_1_WD_EN_RESET 0x08
#define PM8058_SLEEP_CTRL 0x02b
#define PM8921_SLEEP_CTRL 0x10a
#define SLEEP_CTRL_SMPL_EN_RESET 0x04
/* Regulator master enable addresses */
#define REG_PM8058_VREG_EN_MSM 0x018
#define REG_PM8058_VREG_EN_GRP_5_4 0x1c8
/* Regulator control registers for shutdown/reset */
#define PM8058_S0_CTRL 0x004
#define PM8058_S1_CTRL 0x005
#define PM8058_S3_CTRL 0x111
#define PM8058_L21_CTRL 0x120
#define PM8058_L22_CTRL 0x121
#define PM8058_REGULATOR_ENABLE_MASK 0x80
#define PM8058_REGULATOR_ENABLE 0x80
#define PM8058_REGULATOR_DISABLE 0x00
#define PM8058_REGULATOR_PULL_DOWN_MASK 0x40
#define PM8058_REGULATOR_PULL_DOWN_EN 0x40
/* Buck CTRL register */
#define PM8058_SMPS_LEGACY_VREF_SEL 0x20
#define PM8058_SMPS_LEGACY_VPROG_MASK 0x1f
#define PM8058_SMPS_ADVANCED_BAND_MASK 0xC0
#define PM8058_SMPS_ADVANCED_BAND_SHIFT 6
#define PM8058_SMPS_ADVANCED_VPROG_MASK 0x3f
/* Buck TEST2 registers for shutdown/reset */
#define PM8058_S0_TEST2 0x084
#define PM8058_S1_TEST2 0x085
#define PM8058_S3_TEST2 0x11a
#define PM8058_REGULATOR_BANK_WRITE 0x80
#define PM8058_REGULATOR_BANK_MASK 0x70
#define PM8058_REGULATOR_BANK_SHIFT 4
#define PM8058_REGULATOR_BANK_SEL(n) ((n) << PM8058_REGULATOR_BANK_SHIFT)
/* Buck TEST2 register bank 1 */
#define PM8058_SMPS_LEGACY_VLOW_SEL 0x01
/* Buck TEST2 register bank 7 */
#define PM8058_SMPS_ADVANCED_MODE_MASK 0x02
#define PM8058_SMPS_ADVANCED_MODE 0x02
#define PM8058_SMPS_LEGACY_MODE 0x00
/**
* struct pmic8xxx_pwrkey - pmic8xxx pwrkey information
* @key_press_irq: key press irq number
* @regmap: device regmap
* @shutdown_fn: shutdown configuration function
*/
struct pmic8xxx_pwrkey {
int key_press_irq;
struct regmap *regmap;
int (*shutdown_fn)(struct pmic8xxx_pwrkey *, bool);
};
static irqreturn_t pwrkey_press_irq(int irq, void *_pwr)
{
struct input_dev *pwr = _pwr;
input_report_key(pwr, KEY_POWER, 1);
input_sync(pwr);
return IRQ_HANDLED;
}
static irqreturn_t pwrkey_release_irq(int irq, void *_pwr)
{
struct input_dev *pwr = _pwr;
input_report_key(pwr, KEY_POWER, 0);
input_sync(pwr);
return IRQ_HANDLED;
}
static int __maybe_unused pmic8xxx_pwrkey_suspend(struct device *dev)
{
struct pmic8xxx_pwrkey *pwrkey = dev_get_drvdata(dev);
if (device_may_wakeup(dev))
enable_irq_wake(pwrkey->key_press_irq);
return 0;
}
static int __maybe_unused pmic8xxx_pwrkey_resume(struct device *dev)
{
struct pmic8xxx_pwrkey *pwrkey = dev_get_drvdata(dev);
if (device_may_wakeup(dev))
disable_irq_wake(pwrkey->key_press_irq);
return 0;
}
static SIMPLE_DEV_PM_OPS(pm8xxx_pwr_key_pm_ops,
pmic8xxx_pwrkey_suspend, pmic8xxx_pwrkey_resume);
static void pmic8xxx_pwrkey_shutdown(struct platform_device *pdev)
{
struct pmic8xxx_pwrkey *pwrkey = platform_get_drvdata(pdev);
int error;
u8 mask, val;
bool reset = system_state == SYSTEM_RESTART;
if (pwrkey->shutdown_fn) {
error = pwrkey->shutdown_fn(pwrkey, reset);
if (error)
return;
}
/*
* Select action to perform (reset or shutdown) when PS_HOLD goes low.
* Also ensure that KPD, CBL0, and CBL1 pull ups are enabled and that
* USB charging is enabled.
*/
mask = PON_CNTL_1_PULL_UP_EN | PON_CNTL_1_USB_PWR_EN;
mask |= PON_CNTL_1_WD_EN_RESET;
val = mask;
if (!reset)
val &= ~PON_CNTL_1_WD_EN_RESET;
regmap_update_bits(pwrkey->regmap, PON_CNTL_1, mask, val);
}
/*
* Set an SMPS regulator to be disabled in its CTRL register, but enabled
* in the master enable register. Also set it's pull down enable bit.
* Take care to make sure that the output voltage doesn't change if switching
* from advanced mode to legacy mode.
*/
static int pm8058_disable_smps_locally_set_pull_down(struct regmap *regmap,
u16 ctrl_addr, u16 test2_addr, u16 master_enable_addr,
u8 master_enable_bit)
{
int error;
u8 vref_sel, vlow_sel, band, vprog, bank;
unsigned int reg;
bank = PM8058_REGULATOR_BANK_SEL(7);
error = regmap_write(regmap, test2_addr, bank);
if (error)
return error;
error = regmap_read(regmap, test2_addr, &reg);
if (error)
return error;
reg &= PM8058_SMPS_ADVANCED_MODE_MASK;
/* Check if in advanced mode. */
if (reg == PM8058_SMPS_ADVANCED_MODE) {
/* Determine current output voltage. */
error = regmap_read(regmap, ctrl_addr, &reg);
if (error)
return error;
band = reg & PM8058_SMPS_ADVANCED_BAND_MASK;
band >>= PM8058_SMPS_ADVANCED_BAND_SHIFT;
switch (band) {
case 3:
vref_sel = 0;
vlow_sel = 0;
break;
case 2:
vref_sel = PM8058_SMPS_LEGACY_VREF_SEL;
vlow_sel = 0;
break;
case 1:
vref_sel = PM8058_SMPS_LEGACY_VREF_SEL;
vlow_sel = PM8058_SMPS_LEGACY_VLOW_SEL;
break;
default:
pr_err("%s: regulator already disabled\n", __func__);
return -EPERM;
}
vprog = reg & PM8058_SMPS_ADVANCED_VPROG_MASK;
/* Round up if fine step is in use. */
vprog = (vprog + 1) >> 1;
if (vprog > PM8058_SMPS_LEGACY_VPROG_MASK)
vprog = PM8058_SMPS_LEGACY_VPROG_MASK;
/* Set VLOW_SEL bit. */
bank = PM8058_REGULATOR_BANK_SEL(1);
error = regmap_write(regmap, test2_addr, bank);
if (error)
return error;
error = regmap_update_bits(regmap, test2_addr,
PM8058_REGULATOR_BANK_WRITE | PM8058_REGULATOR_BANK_MASK
| PM8058_SMPS_LEGACY_VLOW_SEL,
PM8058_REGULATOR_BANK_WRITE |
PM8058_REGULATOR_BANK_SEL(1) | vlow_sel);
if (error)
return error;
/* Switch to legacy mode */
bank = PM8058_REGULATOR_BANK_SEL(7);
error = regmap_write(regmap, test2_addr, bank);
if (error)
return error;
error = regmap_update_bits(regmap, test2_addr,
PM8058_REGULATOR_BANK_WRITE |
PM8058_REGULATOR_BANK_MASK |
PM8058_SMPS_ADVANCED_MODE_MASK,
PM8058_REGULATOR_BANK_WRITE |
PM8058_REGULATOR_BANK_SEL(7) |
PM8058_SMPS_LEGACY_MODE);
if (error)
return error;
/* Enable locally, enable pull down, keep voltage the same. */
error = regmap_update_bits(regmap, ctrl_addr,
PM8058_REGULATOR_ENABLE_MASK |
PM8058_REGULATOR_PULL_DOWN_MASK |
PM8058_SMPS_LEGACY_VREF_SEL |
PM8058_SMPS_LEGACY_VPROG_MASK,
PM8058_REGULATOR_ENABLE | PM8058_REGULATOR_PULL_DOWN_EN
| vref_sel | vprog);
if (error)
return error;
}
/* Enable in master control register. */
error = regmap_update_bits(regmap, master_enable_addr,
master_enable_bit, master_enable_bit);
if (error)
return error;
/* Disable locally and enable pull down. */
return regmap_update_bits(regmap, ctrl_addr,
PM8058_REGULATOR_ENABLE_MASK | PM8058_REGULATOR_PULL_DOWN_MASK,
PM8058_REGULATOR_DISABLE | PM8058_REGULATOR_PULL_DOWN_EN);
}
static int pm8058_disable_ldo_locally_set_pull_down(struct regmap *regmap,
u16 ctrl_addr, u16 master_enable_addr, u8 master_enable_bit)
{
int error;
/* Enable LDO in master control register. */
error = regmap_update_bits(regmap, master_enable_addr,
master_enable_bit, master_enable_bit);
if (error)
return error;
/* Disable LDO in CTRL register and set pull down */
return regmap_update_bits(regmap, ctrl_addr,
PM8058_REGULATOR_ENABLE_MASK | PM8058_REGULATOR_PULL_DOWN_MASK,
PM8058_REGULATOR_DISABLE | PM8058_REGULATOR_PULL_DOWN_EN);
}
static int pm8058_pwrkey_shutdown(struct pmic8xxx_pwrkey *pwrkey, bool reset)
{
int error;
struct regmap *regmap = pwrkey->regmap;
u8 mask, val;
/* When shutting down, enable active pulldowns on important rails. */
if (!reset) {
/* Disable SMPS's 0,1,3 locally and set pulldown enable bits. */
pm8058_disable_smps_locally_set_pull_down(regmap,
PM8058_S0_CTRL, PM8058_S0_TEST2,
REG_PM8058_VREG_EN_MSM, BIT(7));
pm8058_disable_smps_locally_set_pull_down(regmap,
PM8058_S1_CTRL, PM8058_S1_TEST2,
REG_PM8058_VREG_EN_MSM, BIT(6));
pm8058_disable_smps_locally_set_pull_down(regmap,
PM8058_S3_CTRL, PM8058_S3_TEST2,
REG_PM8058_VREG_EN_GRP_5_4, BIT(7) | BIT(4));
/* Disable LDO 21 locally and set pulldown enable bit. */
pm8058_disable_ldo_locally_set_pull_down(regmap,
PM8058_L21_CTRL, REG_PM8058_VREG_EN_GRP_5_4,
BIT(1));
}
/*
* Fix-up: Set regulator LDO22 to 1.225 V in high power mode. Leave its
* pull-down state intact. This ensures a safe shutdown.
*/
error = regmap_update_bits(regmap, PM8058_L22_CTRL, 0xbf, 0x93);
if (error)
return error;
/* Enable SMPL if resetting is desired */
mask = SLEEP_CTRL_SMPL_EN_RESET;
val = 0;
if (reset)
val = mask;
return regmap_update_bits(regmap, PM8058_SLEEP_CTRL, mask, val);
}
static int pm8921_pwrkey_shutdown(struct pmic8xxx_pwrkey *pwrkey, bool reset)
{
struct regmap *regmap = pwrkey->regmap;
u8 mask = SLEEP_CTRL_SMPL_EN_RESET;
u8 val = 0;
/* Enable SMPL if resetting is desired */
if (reset)
val = mask;
return regmap_update_bits(regmap, PM8921_SLEEP_CTRL, mask, val);
}
static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
{
struct input_dev *pwr;
int key_release_irq = platform_get_irq(pdev, 0);
int key_press_irq = platform_get_irq(pdev, 1);
int err;
unsigned int delay;
unsigned int pon_cntl;
struct regmap *regmap;
struct pmic8xxx_pwrkey *pwrkey;
u32 kpd_delay;
bool pull_up;
if (of_property_read_u32(pdev->dev.of_node, "debounce", &kpd_delay))
kpd_delay = 15625;
/* Valid range of pwr key trigger delay is 1/64 sec to 2 seconds. */
if (kpd_delay > USEC_PER_SEC * 2 || kpd_delay < USEC_PER_SEC / 64) {
dev_err(&pdev->dev, "invalid power key trigger delay\n");
return -EINVAL;
}
pull_up = of_property_read_bool(pdev->dev.of_node, "pull-up");
regmap = dev_get_regmap(pdev->dev.parent, NULL);
if (!regmap) {
dev_err(&pdev->dev, "failed to locate regmap for the device\n");
return -ENODEV;
}
pwrkey = devm_kzalloc(&pdev->dev, sizeof(*pwrkey), GFP_KERNEL);
if (!pwrkey)
return -ENOMEM;
pwrkey->shutdown_fn = of_device_get_match_data(&pdev->dev);
pwrkey->regmap = regmap;
pwrkey->key_press_irq = key_press_irq;
pwr = devm_input_allocate_device(&pdev->dev);
if (!pwr) {
dev_dbg(&pdev->dev, "Can't allocate power button\n");
return -ENOMEM;
}
input_set_capability(pwr, EV_KEY, KEY_POWER);
pwr->name = "pmic8xxx_pwrkey";
pwr->phys = "pmic8xxx_pwrkey/input0";
delay = (kpd_delay << 6) / USEC_PER_SEC;
delay = ilog2(delay);
err = regmap_read(regmap, PON_CNTL_1, &pon_cntl);
if (err < 0) {
dev_err(&pdev->dev, "failed reading PON_CNTL_1 err=%d\n", err);
return err;
}
pon_cntl &= ~PON_CNTL_TRIG_DELAY_MASK;
pon_cntl |= (delay & PON_CNTL_TRIG_DELAY_MASK);
if (pull_up)
pon_cntl |= PON_CNTL_PULL_UP;
else
pon_cntl &= ~PON_CNTL_PULL_UP;
err = regmap_write(regmap, PON_CNTL_1, pon_cntl);
if (err < 0) {
dev_err(&pdev->dev, "failed writing PON_CNTL_1 err=%d\n", err);
return err;
}
err = devm_request_irq(&pdev->dev, key_press_irq, pwrkey_press_irq,
IRQF_TRIGGER_RISING,
"pmic8xxx_pwrkey_press", pwr);
if (err) {
dev_err(&pdev->dev, "Can't get %d IRQ for pwrkey: %d\n",
key_press_irq, err);
return err;
}
err = devm_request_irq(&pdev->dev, key_release_irq, pwrkey_release_irq,
IRQF_TRIGGER_RISING,
"pmic8xxx_pwrkey_release", pwr);
if (err) {
dev_err(&pdev->dev, "Can't get %d IRQ for pwrkey: %d\n",
key_release_irq, err);
return err;
}
err = input_register_device(pwr);
if (err) {
dev_err(&pdev->dev, "Can't register power key: %d\n", err);
return err;
}
platform_set_drvdata(pdev, pwrkey);
device_init_wakeup(&pdev->dev, 1);
return 0;
}
static int pmic8xxx_pwrkey_remove(struct platform_device *pdev)
{
device_init_wakeup(&pdev->dev, 0);
return 0;
}
static const struct of_device_id pm8xxx_pwr_key_id_table[] = {
{ .compatible = "qcom,pm8058-pwrkey", .data = &pm8058_pwrkey_shutdown },
{ .compatible = "qcom,pm8921-pwrkey", .data = &pm8921_pwrkey_shutdown },
{ }
};
MODULE_DEVICE_TABLE(of, pm8xxx_pwr_key_id_table);
static struct platform_driver pmic8xxx_pwrkey_driver = {
.probe = pmic8xxx_pwrkey_probe,
.remove = pmic8xxx_pwrkey_remove,
.shutdown = pmic8xxx_pwrkey_shutdown,
.driver = {
.name = "pm8xxx-pwrkey",
.pm = &pm8xxx_pwr_key_pm_ops,
.of_match_table = pm8xxx_pwr_key_id_table,
},
};
module_platform_driver(pmic8xxx_pwrkey_driver);
MODULE_ALIAS("platform:pmic8xxx_pwrkey");
MODULE_DESCRIPTION("PMIC8XXX Power Key driver");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Trilok Soni <tsoni@codeaurora.org>");
Reference in New Issue View Git Blame Copy Permalink