mirror of
https://github.com/torvalds/linux.git
synced 2024-12-14 07:02:23 +00:00
7f4b04614a
Currently cpufreq frequency table has two fields: frequency and driver_data. driver_data is only for drivers' internal use and cpufreq core shouldn't use it at all. But with the introduction of BOOST frequencies, this assumption was broken and we started using it as a flag instead. There are two problems due to this: - It is against the description of this field, as driver's data is used by the core now. - if drivers fill it with -3 for any frequency, then those frequencies are never considered by cpufreq core as it is exactly same as value of CPUFREQ_BOOST_FREQ, i.e. ~2. The best way to get this fixed is by creating another field flags which will be used for such flags. This patch does that. Along with that various drivers need modifications due to the change of struct cpufreq_frequency_table. Reviewed-by: Gautham R Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
200 lines
4.8 KiB
C
200 lines
4.8 KiB
C
/*
|
|
* kirkwood_freq.c: cpufreq driver for the Marvell kirkwood
|
|
*
|
|
* Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
#include <asm/proc-fns.h>
|
|
|
|
#define CPU_SW_INT_BLK BIT(28)
|
|
|
|
static struct priv
|
|
{
|
|
struct clk *cpu_clk;
|
|
struct clk *ddr_clk;
|
|
struct clk *powersave_clk;
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
} priv;
|
|
|
|
#define STATE_CPU_FREQ 0x01
|
|
#define STATE_DDR_FREQ 0x02
|
|
|
|
/*
|
|
* Kirkwood can swap the clock to the CPU between two clocks:
|
|
*
|
|
* - cpu clk
|
|
* - ddr clk
|
|
*
|
|
* The frequencies are set at runtime before registering this *
|
|
* table.
|
|
*/
|
|
static struct cpufreq_frequency_table kirkwood_freq_table[] = {
|
|
{0, STATE_CPU_FREQ, 0}, /* CPU uses cpuclk */
|
|
{0, STATE_DDR_FREQ, 0}, /* CPU uses ddrclk */
|
|
{0, 0, CPUFREQ_TABLE_END},
|
|
};
|
|
|
|
static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu)
|
|
{
|
|
if (__clk_is_enabled(priv.powersave_clk))
|
|
return kirkwood_freq_table[1].frequency;
|
|
return kirkwood_freq_table[0].frequency;
|
|
}
|
|
|
|
static int kirkwood_cpufreq_target(struct cpufreq_policy *policy,
|
|
unsigned int index)
|
|
{
|
|
unsigned int state = kirkwood_freq_table[index].driver_data;
|
|
unsigned long reg;
|
|
|
|
local_irq_disable();
|
|
|
|
/* Disable interrupts to the CPU */
|
|
reg = readl_relaxed(priv.base);
|
|
reg |= CPU_SW_INT_BLK;
|
|
writel_relaxed(reg, priv.base);
|
|
|
|
switch (state) {
|
|
case STATE_CPU_FREQ:
|
|
clk_disable(priv.powersave_clk);
|
|
break;
|
|
case STATE_DDR_FREQ:
|
|
clk_enable(priv.powersave_clk);
|
|
break;
|
|
}
|
|
|
|
/* Wait-for-Interrupt, while the hardware changes frequency */
|
|
cpu_do_idle();
|
|
|
|
/* Enable interrupts to the CPU */
|
|
reg = readl_relaxed(priv.base);
|
|
reg &= ~CPU_SW_INT_BLK;
|
|
writel_relaxed(reg, priv.base);
|
|
|
|
local_irq_enable();
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Module init and exit code */
|
|
static int kirkwood_cpufreq_cpu_init(struct cpufreq_policy *policy)
|
|
{
|
|
return cpufreq_generic_init(policy, kirkwood_freq_table, 5000);
|
|
}
|
|
|
|
static struct cpufreq_driver kirkwood_cpufreq_driver = {
|
|
.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
|
|
.get = kirkwood_cpufreq_get_cpu_frequency,
|
|
.verify = cpufreq_generic_frequency_table_verify,
|
|
.target_index = kirkwood_cpufreq_target,
|
|
.init = kirkwood_cpufreq_cpu_init,
|
|
.name = "kirkwood-cpufreq",
|
|
.attr = cpufreq_generic_attr,
|
|
};
|
|
|
|
static int kirkwood_cpufreq_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np;
|
|
struct resource *res;
|
|
int err;
|
|
|
|
priv.dev = &pdev->dev;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
priv.base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(priv.base))
|
|
return PTR_ERR(priv.base);
|
|
|
|
np = of_cpu_device_node_get(0);
|
|
if (!np) {
|
|
dev_err(&pdev->dev, "failed to get cpu device node\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
priv.cpu_clk = of_clk_get_by_name(np, "cpu_clk");
|
|
if (IS_ERR(priv.cpu_clk)) {
|
|
dev_err(priv.dev, "Unable to get cpuclk");
|
|
return PTR_ERR(priv.cpu_clk);
|
|
}
|
|
|
|
clk_prepare_enable(priv.cpu_clk);
|
|
kirkwood_freq_table[0].frequency = clk_get_rate(priv.cpu_clk) / 1000;
|
|
|
|
priv.ddr_clk = of_clk_get_by_name(np, "ddrclk");
|
|
if (IS_ERR(priv.ddr_clk)) {
|
|
dev_err(priv.dev, "Unable to get ddrclk");
|
|
err = PTR_ERR(priv.ddr_clk);
|
|
goto out_cpu;
|
|
}
|
|
|
|
clk_prepare_enable(priv.ddr_clk);
|
|
kirkwood_freq_table[1].frequency = clk_get_rate(priv.ddr_clk) / 1000;
|
|
|
|
priv.powersave_clk = of_clk_get_by_name(np, "powersave");
|
|
if (IS_ERR(priv.powersave_clk)) {
|
|
dev_err(priv.dev, "Unable to get powersave");
|
|
err = PTR_ERR(priv.powersave_clk);
|
|
goto out_ddr;
|
|
}
|
|
clk_prepare(priv.powersave_clk);
|
|
|
|
of_node_put(np);
|
|
np = NULL;
|
|
|
|
err = cpufreq_register_driver(&kirkwood_cpufreq_driver);
|
|
if (!err)
|
|
return 0;
|
|
|
|
dev_err(priv.dev, "Failed to register cpufreq driver");
|
|
|
|
clk_disable_unprepare(priv.powersave_clk);
|
|
out_ddr:
|
|
clk_disable_unprepare(priv.ddr_clk);
|
|
out_cpu:
|
|
clk_disable_unprepare(priv.cpu_clk);
|
|
of_node_put(np);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int kirkwood_cpufreq_remove(struct platform_device *pdev)
|
|
{
|
|
cpufreq_unregister_driver(&kirkwood_cpufreq_driver);
|
|
|
|
clk_disable_unprepare(priv.powersave_clk);
|
|
clk_disable_unprepare(priv.ddr_clk);
|
|
clk_disable_unprepare(priv.cpu_clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver kirkwood_cpufreq_platform_driver = {
|
|
.probe = kirkwood_cpufreq_probe,
|
|
.remove = kirkwood_cpufreq_remove,
|
|
.driver = {
|
|
.name = "kirkwood-cpufreq",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(kirkwood_cpufreq_platform_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch");
|
|
MODULE_DESCRIPTION("cpufreq driver for Marvell's kirkwood CPU");
|
|
MODULE_ALIAS("platform:kirkwood-cpufreq");
|