mirror of
https://github.com/torvalds/linux.git
synced 2024-12-26 04:42:12 +00:00
2374a5399b
The HSI2C module on Exynos7 differs in the transfer status bits. Transfer status bits were moved to INT_ENABLE and INT_STATUS registers This patch adds support for the HSI2C module on Exynos7. 1. Implementes a "hw" field in the variant struct to distinguish the hardware. 2. Updates the dt-new compatible in dt-binding documenation Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
54 lines
1.6 KiB
Plaintext
54 lines
1.6 KiB
Plaintext
* Samsung's High Speed I2C controller
|
|
|
|
The Samsung's High Speed I2C controller is used to interface with I2C devices
|
|
at various speeds ranging from 100khz to 3.4Mhz.
|
|
|
|
Required properties:
|
|
- compatible: value should be.
|
|
-> "samsung,exynos5-hsi2c", (DEPRECATED)
|
|
for i2c compatible with HSI2C available
|
|
on Exynos5250 and Exynos5420 SoCs.
|
|
-> "samsung,exynos5250-hsi2c", for i2c compatible with HSI2C available
|
|
on Exynos5250 and Exynos5420 SoCs.
|
|
-> "samsung,exynos5260-hsi2c", for i2c compatible with HSI2C available
|
|
on Exynos5260 SoCs.
|
|
-> "samsung,exynos7-hsi2c", for i2c compatible with HSI2C available
|
|
on Exynos7 SoCs.
|
|
|
|
- reg: physical base address of the controller and length of memory mapped
|
|
region.
|
|
- interrupts: interrupt number to the cpu.
|
|
- #address-cells: always 1 (for i2c addresses)
|
|
- #size-cells: always 0
|
|
|
|
- Pinctrl:
|
|
- pinctrl-0: Pin control group to be used for this controller.
|
|
- pinctrl-names: Should contain only one value - "default".
|
|
|
|
Optional properties:
|
|
- clock-frequency: Desired operating frequency in Hz of the bus.
|
|
-> If not specified, the bus operates in fast-speed mode at
|
|
at 100khz.
|
|
-> If specified, the bus operates in high-speed mode only if the
|
|
clock-frequency is >= 1Mhz.
|
|
|
|
Example:
|
|
|
|
hsi2c@12ca0000 {
|
|
compatible = "samsung,exynos5250-hsi2c";
|
|
reg = <0x12ca0000 0x100>;
|
|
interrupts = <56>;
|
|
clock-frequency = <100000>;
|
|
|
|
pinctrl-0 = <&i2c4_bus>;
|
|
pinctrl-names = "default";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
s2mps11_pmic@66 {
|
|
compatible = "samsung,s2mps11-pmic";
|
|
reg = <0x66>;
|
|
};
|
|
};
|