linux/arch/arm/include/asm/kvm_host.h
Marc Zyngier 3c1e716508 arm/arm64: KVM: Use set/way op trapping to track the state of the caches
Trying to emulate the behaviour of set/way cache ops is fairly
pointless, as there are too many ways we can end-up missing stuff.
Also, there is some system caches out there that simply ignore
set/way operations.

So instead of trying to implement them, let's convert it to VA ops,
and use them as a way to re-enable the trapping of VM ops. That way,
we can detect the point when the MMU/caches are turned off, and do
a full VM flush (which is what the guest was trying to do anyway).

This allows a 32bit zImage to boot on the APM thingy, and will
probably help bootloaders in general.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-29 23:24:56 +01:00

241 lines
6.6 KiB
C

/*
* Copyright (C) 2012 - Virtual Open Systems and Columbia University
* Author: Christoffer Dall <c.dall@virtualopensystems.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#ifndef __ARM_KVM_HOST_H__
#define __ARM_KVM_HOST_H__
#include <linux/types.h>
#include <linux/kvm_types.h>
#include <asm/kvm.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_mmio.h>
#include <asm/fpstate.h>
#include <kvm/arm_arch_timer.h>
#if defined(CONFIG_KVM_ARM_MAX_VCPUS)
#define KVM_MAX_VCPUS CONFIG_KVM_ARM_MAX_VCPUS
#else
#define KVM_MAX_VCPUS 0
#endif
#define KVM_USER_MEM_SLOTS 32
#define KVM_PRIVATE_MEM_SLOTS 4
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
#define KVM_HAVE_ONE_REG
#define KVM_VCPU_MAX_FEATURES 2
#include <kvm/arm_vgic.h>
u32 *kvm_vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num, u32 mode);
int __attribute_const__ kvm_target_cpu(void);
int kvm_reset_vcpu(struct kvm_vcpu *vcpu);
void kvm_reset_coprocs(struct kvm_vcpu *vcpu);
struct kvm_arch {
/* VTTBR value associated with below pgd and vmid */
u64 vttbr;
/* Timer */
struct arch_timer_kvm timer;
/*
* Anything that is not used directly from assembly code goes
* here.
*/
/* The VMID generation used for the virt. memory system */
u64 vmid_gen;
u32 vmid;
/* Stage-2 page table */
pgd_t *pgd;
/* Interrupt controller */
struct vgic_dist vgic;
};
#define KVM_NR_MEM_OBJS 40
/*
* We don't want allocation failures within the mmu code, so we preallocate
* enough memory for a single page fault in a cache.
*/
struct kvm_mmu_memory_cache {
int nobjs;
void *objects[KVM_NR_MEM_OBJS];
};
struct kvm_vcpu_fault_info {
u32 hsr; /* Hyp Syndrome Register */
u32 hxfar; /* Hyp Data/Inst. Fault Address Register */
u32 hpfar; /* Hyp IPA Fault Address Register */
u32 hyp_pc; /* PC when exception was taken from Hyp mode */
};
typedef struct vfp_hard_struct kvm_cpu_context_t;
struct kvm_vcpu_arch {
struct kvm_regs regs;
int target; /* Processor target */
DECLARE_BITMAP(features, KVM_VCPU_MAX_FEATURES);
/* System control coprocessor (cp15) */
u32 cp15[NR_CP15_REGS];
/* The CPU type we expose to the VM */
u32 midr;
/* HYP trapping configuration */
u32 hcr;
/* Interrupt related fields */
u32 irq_lines; /* IRQ and FIQ levels */
/* Exception Information */
struct kvm_vcpu_fault_info fault;
/* Floating point registers (VFP and Advanced SIMD/NEON) */
struct vfp_hard_struct vfp_guest;
/* Host FP context */
kvm_cpu_context_t *host_cpu_context;
/* VGIC state */
struct vgic_cpu vgic_cpu;
struct arch_timer_cpu timer_cpu;
/*
* Anything that is not used directly from assembly code goes
* here.
*/
/* Don't run the guest on this vcpu */
bool pause;
/* IO related fields */
struct kvm_decode mmio_decode;
/* Cache some mmu pages needed inside spinlock regions */
struct kvm_mmu_memory_cache mmu_page_cache;
/* Detect first run of a vcpu */
bool has_run_once;
};
struct kvm_vm_stat {
u32 remote_tlb_flush;
};
struct kvm_vcpu_stat {
u32 halt_wakeup;
};
int kvm_vcpu_preferred_target(struct kvm_vcpu_init *init);
unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu);
int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices);
int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg);
int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg);
u64 kvm_call_hyp(void *hypfn, ...);
void force_vm_exit(const cpumask_t *mask);
#define KVM_ARCH_WANT_MMU_NOTIFIER
int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
int kvm_unmap_hva_range(struct kvm *kvm,
unsigned long start, unsigned long end);
void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte);
unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu);
int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices);
/* We do not have shadow page tables, hence the empty hooks */
static inline int kvm_age_hva(struct kvm *kvm, unsigned long start,
unsigned long end)
{
return 0;
}
static inline int kvm_test_age_hva(struct kvm *kvm, unsigned long hva)
{
return 0;
}
static inline void kvm_arch_mmu_notifier_invalidate_page(struct kvm *kvm,
unsigned long address)
{
}
struct kvm_vcpu *kvm_arm_get_running_vcpu(void);
struct kvm_vcpu __percpu **kvm_get_running_vcpus(void);
int kvm_arm_copy_coproc_indices(struct kvm_vcpu *vcpu, u64 __user *uindices);
unsigned long kvm_arm_num_coproc_regs(struct kvm_vcpu *vcpu);
int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *);
int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *);
int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run,
int exception_index);
static inline void __cpu_init_hyp_mode(phys_addr_t boot_pgd_ptr,
phys_addr_t pgd_ptr,
unsigned long hyp_stack_ptr,
unsigned long vector_ptr)
{
/*
* Call initialization code, and switch to the full blown HYP
* code. The init code doesn't need to preserve these
* registers as r0-r3 are already callee saved according to
* the AAPCS.
* Note that we slightly misuse the prototype by casing the
* stack pointer to a void *.
*
* We don't have enough registers to perform the full init in
* one go. Install the boot PGD first, and then install the
* runtime PGD, stack pointer and vectors. The PGDs are always
* passed as the third argument, in order to be passed into
* r2-r3 to the init code (yes, this is compliant with the
* PCS!).
*/
kvm_call_hyp(NULL, 0, boot_pgd_ptr);
kvm_call_hyp((void*)hyp_stack_ptr, vector_ptr, pgd_ptr);
}
static inline int kvm_arch_dev_ioctl_check_extension(long ext)
{
return 0;
}
static inline void vgic_arch_setup(const struct vgic_params *vgic)
{
BUG_ON(vgic->type != VGIC_V2);
}
int kvm_perf_init(void);
int kvm_perf_teardown(void);
static inline void kvm_arch_hardware_disable(void) {}
static inline void kvm_arch_hardware_unsetup(void) {}
static inline void kvm_arch_sync_events(struct kvm *kvm) {}
static inline void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu) {}
static inline void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu) {}
#endif /* __ARM_KVM_HOST_H__ */