mirror of
https://github.com/torvalds/linux.git
synced 2024-12-24 11:51:27 +00:00
bac7f4c1bf
While IECTRL is disabled, input signals are pulled-down internally.
If pin-muxing is set up first, glitch signals (Low to High transition)
might be input to hardware blocks.
Bad case scenario:
[1] The hardware block is already running before pinctrl is handled.
(the reset is de-asserted by default or by a firmware, for example)
[2] The pin-muxing is set up. The input signals to hardware block
are pulled-down by the chip-internal biasing.
[3] The pins are input-enabled. The signals from the board reach the
hardware block.
Actually, one invalid character is input to the UART blocks for such
SoCs as PH1-LD4, PH1-sLD8, where UART devices start to run at the
power on reset.
To avoid such problems, pins should be input-enabled before muxing.
Fixes: 6e90889202
("pinctrl: UniPhier: add UniPhier pinctrl core support")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reported-by: Dai Okamura <okamura.dai@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
689 lines
18 KiB
C
689 lines
18 KiB
C
/*
|
|
* Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/export.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/pinctrl/pinconf.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
#include <linux/pinctrl/pinmux.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#include "../core.h"
|
|
#include "../pinctrl-utils.h"
|
|
#include "pinctrl-uniphier.h"
|
|
|
|
struct uniphier_pinctrl_priv {
|
|
struct pinctrl_dev *pctldev;
|
|
struct regmap *regmap;
|
|
struct uniphier_pinctrl_socdata *socdata;
|
|
};
|
|
|
|
static int uniphier_pctl_get_groups_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct uniphier_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return priv->socdata->groups_count;
|
|
}
|
|
|
|
static const char *uniphier_pctl_get_group_name(struct pinctrl_dev *pctldev,
|
|
unsigned selector)
|
|
{
|
|
struct uniphier_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return priv->socdata->groups[selector].name;
|
|
}
|
|
|
|
static int uniphier_pctl_get_group_pins(struct pinctrl_dev *pctldev,
|
|
unsigned selector,
|
|
const unsigned **pins,
|
|
unsigned *num_pins)
|
|
{
|
|
struct uniphier_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*pins = priv->socdata->groups[selector].pins;
|
|
*num_pins = priv->socdata->groups[selector].num_pins;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
static void uniphier_pctl_pin_dbg_show(struct pinctrl_dev *pctldev,
|
|
struct seq_file *s, unsigned offset)
|
|
{
|
|
const struct pinctrl_pin_desc *pin = &pctldev->desc->pins[offset];
|
|
const char *pull_dir, *drv_str;
|
|
|
|
switch (uniphier_pin_get_pull_dir(pin->drv_data)) {
|
|
case UNIPHIER_PIN_PULL_UP:
|
|
pull_dir = "UP";
|
|
break;
|
|
case UNIPHIER_PIN_PULL_DOWN:
|
|
pull_dir = "DOWN";
|
|
break;
|
|
case UNIPHIER_PIN_PULL_NONE:
|
|
pull_dir = "NONE";
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
switch (uniphier_pin_get_drv_str(pin->drv_data)) {
|
|
case UNIPHIER_PIN_DRV_4_8:
|
|
drv_str = "4/8(mA)";
|
|
break;
|
|
case UNIPHIER_PIN_DRV_8_12_16_20:
|
|
drv_str = "8/12/16/20(mA)";
|
|
break;
|
|
case UNIPHIER_PIN_DRV_FIXED_4:
|
|
drv_str = "4(mA)";
|
|
break;
|
|
case UNIPHIER_PIN_DRV_FIXED_5:
|
|
drv_str = "5(mA)";
|
|
break;
|
|
case UNIPHIER_PIN_DRV_FIXED_8:
|
|
drv_str = "8(mA)";
|
|
break;
|
|
case UNIPHIER_PIN_DRV_NONE:
|
|
drv_str = "NONE";
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
seq_printf(s, " PULL_DIR=%s DRV_STR=%s", pull_dir, drv_str);
|
|
}
|
|
#endif
|
|
|
|
static const struct pinctrl_ops uniphier_pctlops = {
|
|
.get_groups_count = uniphier_pctl_get_groups_count,
|
|
.get_group_name = uniphier_pctl_get_group_name,
|
|
.get_group_pins = uniphier_pctl_get_group_pins,
|
|
#ifdef CONFIG_DEBUG_FS
|
|
.pin_dbg_show = uniphier_pctl_pin_dbg_show,
|
|
#endif
|
|
.dt_node_to_map = pinconf_generic_dt_node_to_map_all,
|
|
.dt_free_map = pinctrl_utils_dt_free_map,
|
|
};
|
|
|
|
static int uniphier_conf_pin_bias_get(struct pinctrl_dev *pctldev,
|
|
const struct pinctrl_pin_desc *pin,
|
|
enum pin_config_param param)
|
|
{
|
|
struct uniphier_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev);
|
|
enum uniphier_pin_pull_dir pull_dir =
|
|
uniphier_pin_get_pull_dir(pin->drv_data);
|
|
unsigned int pupdctrl, reg, shift, val;
|
|
unsigned int expected = 1;
|
|
int ret;
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
if (pull_dir == UNIPHIER_PIN_PULL_NONE)
|
|
return 0;
|
|
if (pull_dir == UNIPHIER_PIN_PULL_UP_FIXED ||
|
|
pull_dir == UNIPHIER_PIN_PULL_DOWN_FIXED)
|
|
return -EINVAL;
|
|
expected = 0;
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
if (pull_dir == UNIPHIER_PIN_PULL_UP_FIXED)
|
|
return 0;
|
|
if (pull_dir != UNIPHIER_PIN_PULL_UP)
|
|
return -EINVAL;
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
if (pull_dir == UNIPHIER_PIN_PULL_DOWN_FIXED)
|
|
return 0;
|
|
if (pull_dir != UNIPHIER_PIN_PULL_DOWN)
|
|
return -EINVAL;
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
pupdctrl = uniphier_pin_get_pupdctrl(pin->drv_data);
|
|
|
|
reg = UNIPHIER_PINCTRL_PUPDCTRL_BASE + pupdctrl / 32 * 4;
|
|
shift = pupdctrl % 32;
|
|
|
|
ret = regmap_read(priv->regmap, reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val = (val >> shift) & 1;
|
|
|
|
return (val == expected) ? 0 : -EINVAL;
|
|
}
|
|
|
|
static int uniphier_conf_pin_drive_get(struct pinctrl_dev *pctldev,
|
|
const struct pinctrl_pin_desc *pin,
|
|
u16 *strength)
|
|
{
|
|
struct uniphier_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev);
|
|
enum uniphier_pin_drv_str drv_str =
|
|
uniphier_pin_get_drv_str(pin->drv_data);
|
|
const unsigned int strength_4_8[] = {4, 8};
|
|
const unsigned int strength_8_12_16_20[] = {8, 12, 16, 20};
|
|
const unsigned int *supported_strength;
|
|
unsigned int drvctrl, reg, shift, mask, width, val;
|
|
int ret;
|
|
|
|
switch (drv_str) {
|
|
case UNIPHIER_PIN_DRV_4_8:
|
|
supported_strength = strength_4_8;
|
|
width = 1;
|
|
break;
|
|
case UNIPHIER_PIN_DRV_8_12_16_20:
|
|
supported_strength = strength_8_12_16_20;
|
|
width = 2;
|
|
break;
|
|
case UNIPHIER_PIN_DRV_FIXED_4:
|
|
*strength = 4;
|
|
return 0;
|
|
case UNIPHIER_PIN_DRV_FIXED_5:
|
|
*strength = 5;
|
|
return 0;
|
|
case UNIPHIER_PIN_DRV_FIXED_8:
|
|
*strength = 8;
|
|
return 0;
|
|
default:
|
|
/* drive strength control is not supported for this pin */
|
|
return -EINVAL;
|
|
}
|
|
|
|
drvctrl = uniphier_pin_get_drvctrl(pin->drv_data);
|
|
drvctrl *= width;
|
|
|
|
reg = (width == 2) ? UNIPHIER_PINCTRL_DRV2CTRL_BASE :
|
|
UNIPHIER_PINCTRL_DRVCTRL_BASE;
|
|
|
|
reg += drvctrl / 32 * 4;
|
|
shift = drvctrl % 32;
|
|
mask = (1U << width) - 1;
|
|
|
|
ret = regmap_read(priv->regmap, reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*strength = supported_strength[(val >> shift) & mask];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uniphier_conf_pin_input_enable_get(struct pinctrl_dev *pctldev,
|
|
const struct pinctrl_pin_desc *pin)
|
|
{
|
|
struct uniphier_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev);
|
|
unsigned int iectrl = uniphier_pin_get_iectrl(pin->drv_data);
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
if (iectrl == UNIPHIER_PIN_IECTRL_NONE)
|
|
/* This pin is always input-enabled. */
|
|
return 0;
|
|
|
|
ret = regmap_read(priv->regmap, UNIPHIER_PINCTRL_IECTRL, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return val & BIT(iectrl) ? 0 : -EINVAL;
|
|
}
|
|
|
|
static int uniphier_conf_pin_config_get(struct pinctrl_dev *pctldev,
|
|
unsigned pin,
|
|
unsigned long *configs)
|
|
{
|
|
const struct pinctrl_pin_desc *pin_desc = &pctldev->desc->pins[pin];
|
|
enum pin_config_param param = pinconf_to_config_param(*configs);
|
|
bool has_arg = false;
|
|
u16 arg;
|
|
int ret;
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
ret = uniphier_conf_pin_bias_get(pctldev, pin_desc, param);
|
|
break;
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
ret = uniphier_conf_pin_drive_get(pctldev, pin_desc, &arg);
|
|
has_arg = true;
|
|
break;
|
|
case PIN_CONFIG_INPUT_ENABLE:
|
|
ret = uniphier_conf_pin_input_enable_get(pctldev, pin_desc);
|
|
break;
|
|
default:
|
|
/* unsupported parameter */
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
if (ret == 0 && has_arg)
|
|
*configs = pinconf_to_config_packed(param, arg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int uniphier_conf_pin_bias_set(struct pinctrl_dev *pctldev,
|
|
const struct pinctrl_pin_desc *pin,
|
|
enum pin_config_param param,
|
|
u16 arg)
|
|
{
|
|
struct uniphier_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev);
|
|
enum uniphier_pin_pull_dir pull_dir =
|
|
uniphier_pin_get_pull_dir(pin->drv_data);
|
|
unsigned int pupdctrl, reg, shift;
|
|
unsigned int val = 1;
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
if (pull_dir == UNIPHIER_PIN_PULL_NONE)
|
|
return 0;
|
|
if (pull_dir == UNIPHIER_PIN_PULL_UP_FIXED ||
|
|
pull_dir == UNIPHIER_PIN_PULL_DOWN_FIXED) {
|
|
dev_err(pctldev->dev,
|
|
"can not disable pull register for pin %u (%s)\n",
|
|
pin->number, pin->name);
|
|
return -EINVAL;
|
|
}
|
|
val = 0;
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
if (pull_dir == UNIPHIER_PIN_PULL_UP_FIXED && arg != 0)
|
|
return 0;
|
|
if (pull_dir != UNIPHIER_PIN_PULL_UP) {
|
|
dev_err(pctldev->dev,
|
|
"pull-up is unsupported for pin %u (%s)\n",
|
|
pin->number, pin->name);
|
|
return -EINVAL;
|
|
}
|
|
if (arg == 0) {
|
|
dev_err(pctldev->dev, "pull-up can not be total\n");
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
if (pull_dir == UNIPHIER_PIN_PULL_DOWN_FIXED && arg != 0)
|
|
return 0;
|
|
if (pull_dir != UNIPHIER_PIN_PULL_DOWN) {
|
|
dev_err(pctldev->dev,
|
|
"pull-down is unsupported for pin %u (%s)\n",
|
|
pin->number, pin->name);
|
|
return -EINVAL;
|
|
}
|
|
if (arg == 0) {
|
|
dev_err(pctldev->dev, "pull-down can not be total\n");
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
|
|
if (pull_dir == UNIPHIER_PIN_PULL_NONE) {
|
|
dev_err(pctldev->dev,
|
|
"pull-up/down is unsupported for pin %u (%s)\n",
|
|
pin->number, pin->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (arg == 0)
|
|
return 0; /* configuration ingored */
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
pupdctrl = uniphier_pin_get_pupdctrl(pin->drv_data);
|
|
|
|
reg = UNIPHIER_PINCTRL_PUPDCTRL_BASE + pupdctrl / 32 * 4;
|
|
shift = pupdctrl % 32;
|
|
|
|
return regmap_update_bits(priv->regmap, reg, 1 << shift, val << shift);
|
|
}
|
|
|
|
static int uniphier_conf_pin_drive_set(struct pinctrl_dev *pctldev,
|
|
const struct pinctrl_pin_desc *pin,
|
|
u16 strength)
|
|
{
|
|
struct uniphier_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev);
|
|
enum uniphier_pin_drv_str drv_str =
|
|
uniphier_pin_get_drv_str(pin->drv_data);
|
|
const unsigned int strength_4_8[] = {4, 8, -1};
|
|
const unsigned int strength_8_12_16_20[] = {8, 12, 16, 20, -1};
|
|
const unsigned int *supported_strength;
|
|
unsigned int drvctrl, reg, shift, mask, width, val;
|
|
|
|
switch (drv_str) {
|
|
case UNIPHIER_PIN_DRV_4_8:
|
|
supported_strength = strength_4_8;
|
|
width = 1;
|
|
break;
|
|
case UNIPHIER_PIN_DRV_8_12_16_20:
|
|
supported_strength = strength_8_12_16_20;
|
|
width = 2;
|
|
break;
|
|
default:
|
|
dev_err(pctldev->dev,
|
|
"cannot change drive strength for pin %u (%s)\n",
|
|
pin->number, pin->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (val = 0; supported_strength[val] > 0; val++) {
|
|
if (supported_strength[val] > strength)
|
|
break;
|
|
}
|
|
|
|
if (val == 0) {
|
|
dev_err(pctldev->dev,
|
|
"unsupported drive strength %u mA for pin %u (%s)\n",
|
|
strength, pin->number, pin->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
val--;
|
|
|
|
drvctrl = uniphier_pin_get_drvctrl(pin->drv_data);
|
|
drvctrl *= width;
|
|
|
|
reg = (width == 2) ? UNIPHIER_PINCTRL_DRV2CTRL_BASE :
|
|
UNIPHIER_PINCTRL_DRVCTRL_BASE;
|
|
|
|
reg += drvctrl / 32 * 4;
|
|
shift = drvctrl % 32;
|
|
mask = (1U << width) - 1;
|
|
|
|
return regmap_update_bits(priv->regmap, reg,
|
|
mask << shift, val << shift);
|
|
}
|
|
|
|
static int uniphier_conf_pin_input_enable(struct pinctrl_dev *pctldev,
|
|
const struct pinctrl_pin_desc *pin,
|
|
u16 enable)
|
|
{
|
|
struct uniphier_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev);
|
|
unsigned int iectrl = uniphier_pin_get_iectrl(pin->drv_data);
|
|
|
|
if (enable == 0) {
|
|
/*
|
|
* Multiple pins share one input enable, so per-pin disabling
|
|
* is impossible.
|
|
*/
|
|
dev_err(pctldev->dev, "unable to disable input\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (iectrl == UNIPHIER_PIN_IECTRL_NONE)
|
|
/* This pin is always input-enabled. nothing to do. */
|
|
return 0;
|
|
|
|
return regmap_update_bits(priv->regmap, UNIPHIER_PINCTRL_IECTRL,
|
|
BIT(iectrl), BIT(iectrl));
|
|
}
|
|
|
|
static int uniphier_conf_pin_config_set(struct pinctrl_dev *pctldev,
|
|
unsigned pin,
|
|
unsigned long *configs,
|
|
unsigned num_configs)
|
|
{
|
|
const struct pinctrl_pin_desc *pin_desc = &pctldev->desc->pins[pin];
|
|
int i, ret;
|
|
|
|
for (i = 0; i < num_configs; i++) {
|
|
enum pin_config_param param =
|
|
pinconf_to_config_param(configs[i]);
|
|
u16 arg = pinconf_to_config_argument(configs[i]);
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
|
|
ret = uniphier_conf_pin_bias_set(pctldev, pin_desc,
|
|
param, arg);
|
|
break;
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
ret = uniphier_conf_pin_drive_set(pctldev, pin_desc,
|
|
arg);
|
|
break;
|
|
case PIN_CONFIG_INPUT_ENABLE:
|
|
ret = uniphier_conf_pin_input_enable(pctldev,
|
|
pin_desc, arg);
|
|
break;
|
|
default:
|
|
dev_err(pctldev->dev,
|
|
"unsupported configuration parameter %u\n",
|
|
param);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uniphier_conf_pin_config_group_set(struct pinctrl_dev *pctldev,
|
|
unsigned selector,
|
|
unsigned long *configs,
|
|
unsigned num_configs)
|
|
{
|
|
struct uniphier_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev);
|
|
const unsigned *pins = priv->socdata->groups[selector].pins;
|
|
unsigned num_pins = priv->socdata->groups[selector].num_pins;
|
|
int i, ret;
|
|
|
|
for (i = 0; i < num_pins; i++) {
|
|
ret = uniphier_conf_pin_config_set(pctldev, pins[i],
|
|
configs, num_configs);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinconf_ops uniphier_confops = {
|
|
.is_generic = true,
|
|
.pin_config_get = uniphier_conf_pin_config_get,
|
|
.pin_config_set = uniphier_conf_pin_config_set,
|
|
.pin_config_group_set = uniphier_conf_pin_config_group_set,
|
|
};
|
|
|
|
static int uniphier_pmx_get_functions_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct uniphier_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return priv->socdata->functions_count;
|
|
}
|
|
|
|
static const char *uniphier_pmx_get_function_name(struct pinctrl_dev *pctldev,
|
|
unsigned selector)
|
|
{
|
|
struct uniphier_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return priv->socdata->functions[selector].name;
|
|
}
|
|
|
|
static int uniphier_pmx_get_function_groups(struct pinctrl_dev *pctldev,
|
|
unsigned selector,
|
|
const char * const **groups,
|
|
unsigned *num_groups)
|
|
{
|
|
struct uniphier_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*groups = priv->socdata->functions[selector].groups;
|
|
*num_groups = priv->socdata->functions[selector].num_groups;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uniphier_pmx_set_one_mux(struct pinctrl_dev *pctldev, unsigned pin,
|
|
unsigned muxval)
|
|
{
|
|
struct uniphier_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev);
|
|
unsigned mux_bits = priv->socdata->mux_bits;
|
|
unsigned reg_stride = priv->socdata->reg_stride;
|
|
unsigned reg, reg_end, shift, mask;
|
|
int ret;
|
|
|
|
/* some pins need input-enabling */
|
|
ret = uniphier_conf_pin_input_enable(pctldev,
|
|
&pctldev->desc->pins[pin], 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
reg = UNIPHIER_PINCTRL_PINMUX_BASE + pin * mux_bits / 32 * reg_stride;
|
|
reg_end = reg + reg_stride;
|
|
shift = pin * mux_bits % 32;
|
|
mask = (1U << mux_bits) - 1;
|
|
|
|
/*
|
|
* If reg_stride is greater than 4, the MSB of each pinsel shall be
|
|
* stored in the offset+4.
|
|
*/
|
|
for (; reg < reg_end; reg += 4) {
|
|
ret = regmap_update_bits(priv->regmap, reg,
|
|
mask << shift, muxval << shift);
|
|
if (ret)
|
|
return ret;
|
|
muxval >>= mux_bits;
|
|
}
|
|
|
|
if (priv->socdata->load_pinctrl) {
|
|
ret = regmap_write(priv->regmap,
|
|
UNIPHIER_PINCTRL_LOAD_PINMUX, 1);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uniphier_pmx_set_mux(struct pinctrl_dev *pctldev,
|
|
unsigned func_selector,
|
|
unsigned group_selector)
|
|
{
|
|
struct uniphier_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev);
|
|
const struct uniphier_pinctrl_group *grp =
|
|
&priv->socdata->groups[group_selector];
|
|
int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < grp->num_pins; i++) {
|
|
ret = uniphier_pmx_set_one_mux(pctldev, grp->pins[i],
|
|
grp->muxvals[i]);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uniphier_pmx_gpio_request_enable(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_gpio_range *range,
|
|
unsigned offset)
|
|
{
|
|
struct uniphier_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev);
|
|
const struct uniphier_pinctrl_group *groups = priv->socdata->groups;
|
|
int groups_count = priv->socdata->groups_count;
|
|
enum uniphier_pinmux_gpio_range_type range_type;
|
|
int i, j;
|
|
|
|
if (strstr(range->name, "irq"))
|
|
range_type = UNIPHIER_PINMUX_GPIO_RANGE_IRQ;
|
|
else
|
|
range_type = UNIPHIER_PINMUX_GPIO_RANGE_PORT;
|
|
|
|
for (i = 0; i < groups_count; i++) {
|
|
if (groups[i].range_type != range_type)
|
|
continue;
|
|
|
|
for (j = 0; j < groups[i].num_pins; j++)
|
|
if (groups[i].pins[j] == offset)
|
|
goto found;
|
|
}
|
|
|
|
dev_err(pctldev->dev, "pin %u does not support GPIO\n", offset);
|
|
return -EINVAL;
|
|
|
|
found:
|
|
return uniphier_pmx_set_one_mux(pctldev, offset, groups[i].muxvals[j]);
|
|
}
|
|
|
|
static const struct pinmux_ops uniphier_pmxops = {
|
|
.get_functions_count = uniphier_pmx_get_functions_count,
|
|
.get_function_name = uniphier_pmx_get_function_name,
|
|
.get_function_groups = uniphier_pmx_get_function_groups,
|
|
.set_mux = uniphier_pmx_set_mux,
|
|
.gpio_request_enable = uniphier_pmx_gpio_request_enable,
|
|
.strict = true,
|
|
};
|
|
|
|
int uniphier_pinctrl_probe(struct platform_device *pdev,
|
|
struct pinctrl_desc *desc,
|
|
struct uniphier_pinctrl_socdata *socdata)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct uniphier_pinctrl_priv *priv;
|
|
|
|
if (!socdata ||
|
|
!socdata->groups ||
|
|
!socdata->groups_count ||
|
|
!socdata->functions ||
|
|
!socdata->functions_count ||
|
|
!socdata->mux_bits ||
|
|
!socdata->reg_stride) {
|
|
dev_err(dev, "pinctrl socdata lacks necessary members\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->regmap = syscon_node_to_regmap(dev->of_node);
|
|
if (IS_ERR(priv->regmap)) {
|
|
dev_err(dev, "failed to get regmap\n");
|
|
return PTR_ERR(priv->regmap);
|
|
}
|
|
|
|
priv->socdata = socdata;
|
|
desc->pctlops = &uniphier_pctlops;
|
|
desc->pmxops = &uniphier_pmxops;
|
|
desc->confops = &uniphier_confops;
|
|
|
|
priv->pctldev = pinctrl_register(desc, dev, priv);
|
|
if (IS_ERR(priv->pctldev)) {
|
|
dev_err(dev, "failed to register UniPhier pinctrl driver\n");
|
|
return PTR_ERR(priv->pctldev);
|
|
}
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(uniphier_pinctrl_probe);
|
|
|
|
int uniphier_pinctrl_remove(struct platform_device *pdev)
|
|
{
|
|
struct uniphier_pinctrl_priv *priv = platform_get_drvdata(pdev);
|
|
|
|
pinctrl_unregister(priv->pctldev);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(uniphier_pinctrl_remove);
|