mirror of
https://github.com/torvalds/linux.git
synced 2024-11-06 03:51:48 +00:00
0e170c72c0
Add support for the 965G and 965GM graphic chipsets to the intelfb driver. I have a notebook with an Intel Mobile GM965/GL960 Integrated Graphics Controller and with the attached patch the framebuffer comes up. I have tested it a bit with DirectFB to make sure it is working stable. I also have an Intel Mobile GM945 and I compared the results, the programming interface of the 9xx series from Intel is mostly the same, so I think the patch should add all the functionality which the 945GM has. Signed-off-by: Maik Broemme <mbroemme@plusserver.de> Cc: Dave Airlie <airlied@linux.ie> Cc: Antonino Daplas <adaplas@pol.net> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1685 lines
44 KiB
C
1685 lines
44 KiB
C
/*
|
|
* intelfb
|
|
*
|
|
* Linux framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/
|
|
* 945G/945GM/965G/965GM integrated graphics chips.
|
|
*
|
|
* Copyright © 2002, 2003 David Dawes <dawes@xfree86.org>
|
|
* 2004 Sylvain Meyer
|
|
* 2006 David Airlie
|
|
*
|
|
* This driver consists of two parts. The first part (intelfbdrv.c) provides
|
|
* the basic fbdev interfaces, is derived in part from the radeonfb and
|
|
* vesafb drivers, and is covered by the GPL. The second part (intelfbhw.c)
|
|
* provides the code to program the hardware. Most of it is derived from
|
|
* the i810/i830 XFree86 driver. The HW-specific code is covered here
|
|
* under a dual license (GPL and MIT/XFree86 license).
|
|
*
|
|
* Author: David Dawes
|
|
*
|
|
*/
|
|
|
|
/* $DHD: intelfb/intelfbdrv.c,v 1.20 2003/06/27 15:17:40 dawes Exp $ */
|
|
|
|
/*
|
|
* Changes:
|
|
* 01/2003 - Initial driver (0.1.0), no mode switching, no acceleration.
|
|
* This initial version is a basic core that works a lot like
|
|
* the vesafb driver. It must be built-in to the kernel,
|
|
* and the initial video mode must be set with vga=XXX at
|
|
* boot time. (David Dawes)
|
|
*
|
|
* 01/2003 - Version 0.2.0: Mode switching added, colormap support
|
|
* implemented, Y panning, and soft screen blanking implemented.
|
|
* No acceleration yet. (David Dawes)
|
|
*
|
|
* 01/2003 - Version 0.3.0: fbcon acceleration support added. Module
|
|
* option handling added. (David Dawes)
|
|
*
|
|
* 01/2003 - Version 0.4.0: fbcon HW cursor support added. (David Dawes)
|
|
*
|
|
* 01/2003 - Version 0.4.1: Add auto-generation of built-in modes.
|
|
* (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.4.2: Add check for active non-CRT devices, and
|
|
* mode validation checks. (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.4.3: Check when the VC is in graphics mode so that
|
|
* acceleration is disabled while an XFree86 server is running.
|
|
* (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.4.4: Monitor DPMS support. (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.4.5: Basic XFree86 + fbdev working. (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.5.0: Modify to work with the 2.5.32 kernel as well
|
|
* as 2.4.x kernels. (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.6.0: Split out HW-specifics into a separate file.
|
|
* (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.7.0: Test on 852GM/855GM. Acceleration and HW
|
|
* cursor are disabled on this platform. (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.7.1: Test on 845G. Acceleration is disabled
|
|
* on this platform. (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.7.2: Test on 830M. Acceleration and HW
|
|
* cursor are disabled on this platform. (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.7.3: Fix 8-bit modes for mobile platforms
|
|
* (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.7.4: Add checks for FB and FBCON_HAS_CFB* configured
|
|
* in the kernel, and add mode bpp verification and default
|
|
* bpp selection based on which FBCON_HAS_CFB* are configured.
|
|
* (David Dawes)
|
|
*
|
|
* 02/2003 - Version 0.7.5: Add basic package/install scripts based on the
|
|
* DRI packaging scripts. (David Dawes)
|
|
*
|
|
* 04/2003 - Version 0.7.6: Fix typo that affects builds with SMP-enabled
|
|
* kernels. (David Dawes, reported by Anupam).
|
|
*
|
|
* 06/2003 - Version 0.7.7:
|
|
* Fix Makefile.kernel build problem (Tsutomu Yasuda).
|
|
* Fix mis-placed #endif (2.4.21 kernel).
|
|
*
|
|
* 09/2004 - Version 0.9.0 - by Sylvain Meyer
|
|
* Port to linux 2.6 kernel fbdev
|
|
* Fix HW accel and HW cursor on i845G
|
|
* Use of agpgart for fb memory reservation
|
|
* Add mtrr support
|
|
*
|
|
* 10/2004 - Version 0.9.1
|
|
* Use module_param instead of old MODULE_PARM
|
|
* Some cleanup
|
|
*
|
|
* 11/2004 - Version 0.9.2
|
|
* Add vram option to reserve more memory than stolen by BIOS
|
|
* Fix intelfbhw_pan_display typo
|
|
* Add __initdata annotations
|
|
*
|
|
* 04/2008 - Version 0.9.5
|
|
* Add support for 965G/965GM. (Maik Broemme <mbroemme@plusserver.de>)
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/string.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/pagemap.h>
|
|
#include <linux/screen_info.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#ifdef CONFIG_MTRR
|
|
#include <asm/mtrr.h>
|
|
#endif
|
|
|
|
#include "intelfb.h"
|
|
#include "intelfbhw.h"
|
|
#include "../edid.h"
|
|
|
|
static void __devinit get_initial_mode(struct intelfb_info *dinfo);
|
|
static void update_dinfo(struct intelfb_info *dinfo,
|
|
struct fb_var_screeninfo *var);
|
|
static int intelfb_open(struct fb_info *info, int user);
|
|
static int intelfb_release(struct fb_info *info, int user);
|
|
static int intelfb_check_var(struct fb_var_screeninfo *var,
|
|
struct fb_info *info);
|
|
static int intelfb_set_par(struct fb_info *info);
|
|
static int intelfb_setcolreg(unsigned regno, unsigned red, unsigned green,
|
|
unsigned blue, unsigned transp,
|
|
struct fb_info *info);
|
|
|
|
static int intelfb_blank(int blank, struct fb_info *info);
|
|
static int intelfb_pan_display(struct fb_var_screeninfo *var,
|
|
struct fb_info *info);
|
|
|
|
static void intelfb_fillrect(struct fb_info *info,
|
|
const struct fb_fillrect *rect);
|
|
static void intelfb_copyarea(struct fb_info *info,
|
|
const struct fb_copyarea *region);
|
|
static void intelfb_imageblit(struct fb_info *info,
|
|
const struct fb_image *image);
|
|
static int intelfb_cursor(struct fb_info *info,
|
|
struct fb_cursor *cursor);
|
|
|
|
static int intelfb_sync(struct fb_info *info);
|
|
|
|
static int intelfb_ioctl(struct fb_info *info,
|
|
unsigned int cmd, unsigned long arg);
|
|
|
|
static int __devinit intelfb_pci_register(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent);
|
|
static void __devexit intelfb_pci_unregister(struct pci_dev *pdev);
|
|
static int __devinit intelfb_set_fbinfo(struct intelfb_info *dinfo);
|
|
|
|
/*
|
|
* Limiting the class to PCI_CLASS_DISPLAY_VGA prevents function 1 of the
|
|
* mobile chipsets from being registered.
|
|
*/
|
|
#if DETECT_VGA_CLASS_ONLY
|
|
#define INTELFB_CLASS_MASK ~0 << 8
|
|
#else
|
|
#define INTELFB_CLASS_MASK 0
|
|
#endif
|
|
|
|
static struct pci_device_id intelfb_pci_table[] __devinitdata = {
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_830M, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_830M },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_845G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_845G },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_85XGM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_85XGM },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_865G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_865G },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915G },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915GM },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945G },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945GM },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_965G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_965G },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_965GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_965GM },
|
|
{ 0, }
|
|
};
|
|
|
|
/* Global data */
|
|
static int num_registered = 0;
|
|
|
|
/* fb ops */
|
|
static struct fb_ops intel_fb_ops = {
|
|
.owner = THIS_MODULE,
|
|
.fb_open = intelfb_open,
|
|
.fb_release = intelfb_release,
|
|
.fb_check_var = intelfb_check_var,
|
|
.fb_set_par = intelfb_set_par,
|
|
.fb_setcolreg = intelfb_setcolreg,
|
|
.fb_blank = intelfb_blank,
|
|
.fb_pan_display = intelfb_pan_display,
|
|
.fb_fillrect = intelfb_fillrect,
|
|
.fb_copyarea = intelfb_copyarea,
|
|
.fb_imageblit = intelfb_imageblit,
|
|
.fb_cursor = intelfb_cursor,
|
|
.fb_sync = intelfb_sync,
|
|
.fb_ioctl = intelfb_ioctl
|
|
};
|
|
|
|
/* PCI driver module table */
|
|
static struct pci_driver intelfb_driver = {
|
|
.name = "intelfb",
|
|
.id_table = intelfb_pci_table,
|
|
.probe = intelfb_pci_register,
|
|
.remove = __devexit_p(intelfb_pci_unregister)
|
|
};
|
|
|
|
/* Module description/parameters */
|
|
MODULE_AUTHOR("David Dawes <dawes@tungstengraphics.com>, "
|
|
"Sylvain Meyer <sylvain.meyer@worldonline.fr>");
|
|
MODULE_DESCRIPTION("Framebuffer driver for Intel(R) " SUPPORTED_CHIPSETS
|
|
" chipsets");
|
|
MODULE_LICENSE("Dual BSD/GPL");
|
|
MODULE_DEVICE_TABLE(pci, intelfb_pci_table);
|
|
|
|
static int accel = 1;
|
|
static int vram = 4;
|
|
static int hwcursor = 0;
|
|
static int mtrr = 1;
|
|
static int fixed = 0;
|
|
static int noinit = 0;
|
|
static int noregister = 0;
|
|
static int probeonly = 0;
|
|
static int idonly = 0;
|
|
static int bailearly = 0;
|
|
static int voffset = 48;
|
|
static char *mode = NULL;
|
|
|
|
module_param(accel, bool, S_IRUGO);
|
|
MODULE_PARM_DESC(accel, "Enable hardware acceleration");
|
|
module_param(vram, int, S_IRUGO);
|
|
MODULE_PARM_DESC(vram, "System RAM to allocate to framebuffer in MiB");
|
|
module_param(voffset, int, S_IRUGO);
|
|
MODULE_PARM_DESC(voffset, "Offset of framebuffer in MiB");
|
|
module_param(hwcursor, bool, S_IRUGO);
|
|
MODULE_PARM_DESC(hwcursor, "Enable HW cursor");
|
|
module_param(mtrr, bool, S_IRUGO);
|
|
MODULE_PARM_DESC(mtrr, "Enable MTRR support");
|
|
module_param(fixed, bool, S_IRUGO);
|
|
MODULE_PARM_DESC(fixed, "Disable mode switching");
|
|
module_param(noinit, bool, 0);
|
|
MODULE_PARM_DESC(noinit, "Don't initialise graphics mode when loading");
|
|
module_param(noregister, bool, 0);
|
|
MODULE_PARM_DESC(noregister, "Don't register, just probe and exit (debug)");
|
|
module_param(probeonly, bool, 0);
|
|
MODULE_PARM_DESC(probeonly, "Do a minimal probe (debug)");
|
|
module_param(idonly, bool, 0);
|
|
MODULE_PARM_DESC(idonly, "Just identify without doing anything else (debug)");
|
|
module_param(bailearly, bool, 0);
|
|
MODULE_PARM_DESC(bailearly, "Bail out early, depending on value (debug)");
|
|
module_param(mode, charp, S_IRUGO);
|
|
MODULE_PARM_DESC(mode,
|
|
"Initial video mode \"<xres>x<yres>[-<depth>][@<refresh>]\"");
|
|
|
|
#ifndef MODULE
|
|
#define OPT_EQUAL(opt, name) (!strncmp(opt, name, strlen(name)))
|
|
#define OPT_INTVAL(opt, name) simple_strtoul(opt + strlen(name) + 1, NULL, 0)
|
|
#define OPT_STRVAL(opt, name) (opt + strlen(name))
|
|
|
|
static __inline__ char * get_opt_string(const char *this_opt, const char *name)
|
|
{
|
|
const char *p;
|
|
int i;
|
|
char *ret;
|
|
|
|
p = OPT_STRVAL(this_opt, name);
|
|
i = 0;
|
|
while (p[i] && p[i] != ' ' && p[i] != ',')
|
|
i++;
|
|
ret = kmalloc(i + 1, GFP_KERNEL);
|
|
if (ret) {
|
|
strncpy(ret, p, i);
|
|
ret[i] = '\0';
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static __inline__ int get_opt_int(const char *this_opt, const char *name,
|
|
int *ret)
|
|
{
|
|
if (!ret)
|
|
return 0;
|
|
|
|
if (!OPT_EQUAL(this_opt, name))
|
|
return 0;
|
|
|
|
*ret = OPT_INTVAL(this_opt, name);
|
|
return 1;
|
|
}
|
|
|
|
static __inline__ int get_opt_bool(const char *this_opt, const char *name,
|
|
int *ret)
|
|
{
|
|
if (!ret)
|
|
return 0;
|
|
|
|
if (OPT_EQUAL(this_opt, name)) {
|
|
if (this_opt[strlen(name)] == '=')
|
|
*ret = simple_strtoul(this_opt + strlen(name) + 1,
|
|
NULL, 0);
|
|
else
|
|
*ret = 1;
|
|
} else {
|
|
if (OPT_EQUAL(this_opt, "no") && OPT_EQUAL(this_opt + 2, name))
|
|
*ret = 0;
|
|
else
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static int __init intelfb_setup(char *options)
|
|
{
|
|
char *this_opt;
|
|
|
|
DBG_MSG("intelfb_setup\n");
|
|
|
|
if (!options || !*options) {
|
|
DBG_MSG("no options\n");
|
|
return 0;
|
|
} else
|
|
DBG_MSG("options: %s\n", options);
|
|
|
|
/*
|
|
* These are the built-in options analogous to the module parameters
|
|
* defined above.
|
|
*
|
|
* The syntax is:
|
|
*
|
|
* video=intelfb:[mode][,<param>=<val>] ...
|
|
*
|
|
* e.g.,
|
|
*
|
|
* video=intelfb:1024x768-16@75,accel=0
|
|
*/
|
|
|
|
while ((this_opt = strsep(&options, ","))) {
|
|
if (!*this_opt)
|
|
continue;
|
|
if (get_opt_bool(this_opt, "accel", &accel))
|
|
;
|
|
else if (get_opt_int(this_opt, "vram", &vram))
|
|
;
|
|
else if (get_opt_bool(this_opt, "hwcursor", &hwcursor))
|
|
;
|
|
else if (get_opt_bool(this_opt, "mtrr", &mtrr))
|
|
;
|
|
else if (get_opt_bool(this_opt, "fixed", &fixed))
|
|
;
|
|
else if (get_opt_bool(this_opt, "init", &noinit))
|
|
noinit = !noinit;
|
|
else if (OPT_EQUAL(this_opt, "mode="))
|
|
mode = get_opt_string(this_opt, "mode=");
|
|
else
|
|
mode = this_opt;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
static int __init intelfb_init(void)
|
|
{
|
|
#ifndef MODULE
|
|
char *option = NULL;
|
|
#endif
|
|
|
|
DBG_MSG("intelfb_init\n");
|
|
|
|
INF_MSG("Framebuffer driver for "
|
|
"Intel(R) " SUPPORTED_CHIPSETS " chipsets\n");
|
|
INF_MSG("Version " INTELFB_VERSION "\n");
|
|
|
|
if (idonly)
|
|
return -ENODEV;
|
|
|
|
#ifndef MODULE
|
|
if (fb_get_options("intelfb", &option))
|
|
return -ENODEV;
|
|
intelfb_setup(option);
|
|
#endif
|
|
|
|
return pci_register_driver(&intelfb_driver);
|
|
}
|
|
|
|
static void __exit intelfb_exit(void)
|
|
{
|
|
DBG_MSG("intelfb_exit\n");
|
|
pci_unregister_driver(&intelfb_driver);
|
|
}
|
|
|
|
module_init(intelfb_init);
|
|
module_exit(intelfb_exit);
|
|
|
|
/***************************************************************
|
|
* mtrr support functions *
|
|
***************************************************************/
|
|
|
|
#ifdef CONFIG_MTRR
|
|
static inline void __devinit set_mtrr(struct intelfb_info *dinfo)
|
|
{
|
|
dinfo->mtrr_reg = mtrr_add(dinfo->aperture.physical,
|
|
dinfo->aperture.size, MTRR_TYPE_WRCOMB, 1);
|
|
if (dinfo->mtrr_reg < 0) {
|
|
ERR_MSG("unable to set MTRR\n");
|
|
return;
|
|
}
|
|
dinfo->has_mtrr = 1;
|
|
}
|
|
static inline void unset_mtrr(struct intelfb_info *dinfo)
|
|
{
|
|
if (dinfo->has_mtrr)
|
|
mtrr_del(dinfo->mtrr_reg, dinfo->aperture.physical,
|
|
dinfo->aperture.size);
|
|
}
|
|
#else
|
|
#define set_mtrr(x) WRN_MSG("MTRR is disabled in the kernel\n")
|
|
|
|
#define unset_mtrr(x) do { } while (0)
|
|
#endif /* CONFIG_MTRR */
|
|
|
|
/***************************************************************
|
|
* driver init / cleanup *
|
|
***************************************************************/
|
|
|
|
static void cleanup(struct intelfb_info *dinfo)
|
|
{
|
|
DBG_MSG("cleanup\n");
|
|
|
|
if (!dinfo)
|
|
return;
|
|
|
|
intelfbhw_disable_irq(dinfo);
|
|
|
|
fb_dealloc_cmap(&dinfo->info->cmap);
|
|
kfree(dinfo->info->pixmap.addr);
|
|
|
|
if (dinfo->registered)
|
|
unregister_framebuffer(dinfo->info);
|
|
|
|
unset_mtrr(dinfo);
|
|
|
|
if (dinfo->fbmem_gart && dinfo->gtt_fb_mem) {
|
|
agp_unbind_memory(dinfo->gtt_fb_mem);
|
|
agp_free_memory(dinfo->gtt_fb_mem);
|
|
}
|
|
if (dinfo->gtt_cursor_mem) {
|
|
agp_unbind_memory(dinfo->gtt_cursor_mem);
|
|
agp_free_memory(dinfo->gtt_cursor_mem);
|
|
}
|
|
if (dinfo->gtt_ring_mem) {
|
|
agp_unbind_memory(dinfo->gtt_ring_mem);
|
|
agp_free_memory(dinfo->gtt_ring_mem);
|
|
}
|
|
|
|
#ifdef CONFIG_FB_INTEL_I2C
|
|
/* un-register I2C bus */
|
|
intelfb_delete_i2c_busses(dinfo);
|
|
#endif
|
|
|
|
if (dinfo->mmio_base)
|
|
iounmap((void __iomem *)dinfo->mmio_base);
|
|
if (dinfo->aperture.virtual)
|
|
iounmap((void __iomem *)dinfo->aperture.virtual);
|
|
|
|
if (dinfo->flag & INTELFB_MMIO_ACQUIRED)
|
|
release_mem_region(dinfo->mmio_base_phys, INTEL_REG_SIZE);
|
|
if (dinfo->flag & INTELFB_FB_ACQUIRED)
|
|
release_mem_region(dinfo->aperture.physical,
|
|
dinfo->aperture.size);
|
|
framebuffer_release(dinfo->info);
|
|
}
|
|
|
|
#define bailout(dinfo) do { \
|
|
DBG_MSG("bailout\n"); \
|
|
cleanup(dinfo); \
|
|
INF_MSG("Not going to register framebuffer, exiting...\n"); \
|
|
return -ENODEV; \
|
|
} while (0)
|
|
|
|
|
|
static int __devinit intelfb_pci_register(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct fb_info *info;
|
|
struct intelfb_info *dinfo;
|
|
int i, err, dvo;
|
|
int aperture_size, stolen_size;
|
|
struct agp_kern_info gtt_info;
|
|
int agp_memtype;
|
|
const char *s;
|
|
struct agp_bridge_data *bridge;
|
|
int aperture_bar = 0;
|
|
int mmio_bar = 1;
|
|
int offset;
|
|
|
|
DBG_MSG("intelfb_pci_register\n");
|
|
|
|
num_registered++;
|
|
if (num_registered != 1) {
|
|
ERR_MSG("Attempted to register %d devices "
|
|
"(should be only 1).\n", num_registered);
|
|
return -ENODEV;
|
|
}
|
|
|
|
info = framebuffer_alloc(sizeof(struct intelfb_info), &pdev->dev);
|
|
if (!info) {
|
|
ERR_MSG("Could not allocate memory for intelfb_info.\n");
|
|
return -ENODEV;
|
|
}
|
|
if (fb_alloc_cmap(&info->cmap, 256, 1) < 0) {
|
|
ERR_MSG("Could not allocate cmap for intelfb_info.\n");
|
|
goto err_out_cmap;
|
|
return -ENODEV;
|
|
}
|
|
|
|
dinfo = info->par;
|
|
dinfo->info = info;
|
|
dinfo->fbops = &intel_fb_ops;
|
|
dinfo->pdev = pdev;
|
|
|
|
/* Reserve pixmap space. */
|
|
info->pixmap.addr = kzalloc(64 * 1024, GFP_KERNEL);
|
|
if (info->pixmap.addr == NULL) {
|
|
ERR_MSG("Cannot reserve pixmap memory.\n");
|
|
goto err_out_pixmap;
|
|
}
|
|
|
|
/* set early this option because it could be changed by tv encoder
|
|
driver */
|
|
dinfo->fixed_mode = fixed;
|
|
|
|
/* Enable device. */
|
|
if ((err = pci_enable_device(pdev))) {
|
|
ERR_MSG("Cannot enable device.\n");
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Set base addresses. */
|
|
if ((ent->device == PCI_DEVICE_ID_INTEL_915G) ||
|
|
(ent->device == PCI_DEVICE_ID_INTEL_915GM) ||
|
|
(ent->device == PCI_DEVICE_ID_INTEL_945G) ||
|
|
(ent->device == PCI_DEVICE_ID_INTEL_945GM) ||
|
|
(ent->device == PCI_DEVICE_ID_INTEL_965G) ||
|
|
(ent->device == PCI_DEVICE_ID_INTEL_965GM)) {
|
|
|
|
aperture_bar = 2;
|
|
mmio_bar = 0;
|
|
}
|
|
dinfo->aperture.physical = pci_resource_start(pdev, aperture_bar);
|
|
dinfo->aperture.size = pci_resource_len(pdev, aperture_bar);
|
|
dinfo->mmio_base_phys = pci_resource_start(pdev, mmio_bar);
|
|
DBG_MSG("fb aperture: 0x%llx/0x%llx, MMIO region: 0x%llx/0x%llx\n",
|
|
(unsigned long long)pci_resource_start(pdev, aperture_bar),
|
|
(unsigned long long)pci_resource_len(pdev, aperture_bar),
|
|
(unsigned long long)pci_resource_start(pdev, mmio_bar),
|
|
(unsigned long long)pci_resource_len(pdev, mmio_bar));
|
|
|
|
/* Reserve the fb and MMIO regions */
|
|
if (!request_mem_region(dinfo->aperture.physical, dinfo->aperture.size,
|
|
INTELFB_MODULE_NAME)) {
|
|
ERR_MSG("Cannot reserve FB region.\n");
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
dinfo->flag |= INTELFB_FB_ACQUIRED;
|
|
|
|
if (!request_mem_region(dinfo->mmio_base_phys,
|
|
INTEL_REG_SIZE,
|
|
INTELFB_MODULE_NAME)) {
|
|
ERR_MSG("Cannot reserve MMIO region.\n");
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
dinfo->flag |= INTELFB_MMIO_ACQUIRED;
|
|
|
|
/* Get the chipset info. */
|
|
dinfo->pci_chipset = pdev->device;
|
|
|
|
if (intelfbhw_get_chipset(pdev, dinfo)) {
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (intelfbhw_get_memory(pdev, &aperture_size,&stolen_size)) {
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
INF_MSG("%02x:%02x.%d: %s, aperture size %dMB, "
|
|
"stolen memory %dkB\n",
|
|
pdev->bus->number, PCI_SLOT(pdev->devfn),
|
|
PCI_FUNC(pdev->devfn), dinfo->name,
|
|
BtoMB(aperture_size), BtoKB(stolen_size));
|
|
|
|
/* Set these from the options. */
|
|
dinfo->accel = accel;
|
|
dinfo->hwcursor = hwcursor;
|
|
|
|
if (NOACCEL_CHIPSET(dinfo) && dinfo->accel == 1) {
|
|
INF_MSG("Acceleration is not supported for the %s chipset.\n",
|
|
dinfo->name);
|
|
dinfo->accel = 0;
|
|
}
|
|
|
|
/* Framebuffer parameters - Use all the stolen memory if >= vram */
|
|
if (ROUND_UP_TO_PAGE(stolen_size) >= MB(vram)) {
|
|
dinfo->fb.size = ROUND_UP_TO_PAGE(stolen_size);
|
|
dinfo->fbmem_gart = 0;
|
|
} else {
|
|
dinfo->fb.size = MB(vram);
|
|
dinfo->fbmem_gart = 1;
|
|
}
|
|
|
|
/* Allocate space for the ring buffer and HW cursor if enabled. */
|
|
if (dinfo->accel) {
|
|
dinfo->ring.size = RINGBUFFER_SIZE;
|
|
dinfo->ring_tail_mask = dinfo->ring.size - 1;
|
|
}
|
|
if (dinfo->hwcursor)
|
|
dinfo->cursor.size = HW_CURSOR_SIZE;
|
|
|
|
/* Use agpgart to manage the GATT */
|
|
if (!(bridge = agp_backend_acquire(pdev))) {
|
|
ERR_MSG("cannot acquire agp\n");
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* get the current gatt info */
|
|
if (agp_copy_info(bridge, >t_info)) {
|
|
ERR_MSG("cannot get agp info\n");
|
|
agp_backend_release(bridge);
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (MB(voffset) < stolen_size)
|
|
offset = (stolen_size >> 12);
|
|
else
|
|
offset = ROUND_UP_TO_PAGE(MB(voffset))/GTT_PAGE_SIZE;
|
|
|
|
/* set the mem offsets - set them after the already used pages */
|
|
if (dinfo->accel)
|
|
dinfo->ring.offset = offset + gtt_info.current_memory;
|
|
if (dinfo->hwcursor)
|
|
dinfo->cursor.offset = offset +
|
|
+ gtt_info.current_memory + (dinfo->ring.size >> 12);
|
|
if (dinfo->fbmem_gart)
|
|
dinfo->fb.offset = offset +
|
|
+ gtt_info.current_memory + (dinfo->ring.size >> 12)
|
|
+ (dinfo->cursor.size >> 12);
|
|
|
|
/* Allocate memories (which aren't stolen) */
|
|
/* Map the fb and MMIO regions */
|
|
/* ioremap only up to the end of used aperture */
|
|
dinfo->aperture.virtual = (u8 __iomem *)ioremap_nocache
|
|
(dinfo->aperture.physical, ((offset + dinfo->fb.offset) << 12)
|
|
+ dinfo->fb.size);
|
|
if (!dinfo->aperture.virtual) {
|
|
ERR_MSG("Cannot remap FB region.\n");
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
dinfo->mmio_base =
|
|
(u8 __iomem *)ioremap_nocache(dinfo->mmio_base_phys,
|
|
INTEL_REG_SIZE);
|
|
if (!dinfo->mmio_base) {
|
|
ERR_MSG("Cannot remap MMIO region.\n");
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (dinfo->accel) {
|
|
if (!(dinfo->gtt_ring_mem =
|
|
agp_allocate_memory(bridge, dinfo->ring.size >> 12,
|
|
AGP_NORMAL_MEMORY))) {
|
|
ERR_MSG("cannot allocate ring buffer memory\n");
|
|
agp_backend_release(bridge);
|
|
cleanup(dinfo);
|
|
return -ENOMEM;
|
|
}
|
|
if (agp_bind_memory(dinfo->gtt_ring_mem,
|
|
dinfo->ring.offset)) {
|
|
ERR_MSG("cannot bind ring buffer memory\n");
|
|
agp_backend_release(bridge);
|
|
cleanup(dinfo);
|
|
return -EBUSY;
|
|
}
|
|
dinfo->ring.physical = dinfo->aperture.physical
|
|
+ (dinfo->ring.offset << 12);
|
|
dinfo->ring.virtual = dinfo->aperture.virtual
|
|
+ (dinfo->ring.offset << 12);
|
|
dinfo->ring_head = 0;
|
|
}
|
|
if (dinfo->hwcursor) {
|
|
agp_memtype = dinfo->mobile ? AGP_PHYSICAL_MEMORY
|
|
: AGP_NORMAL_MEMORY;
|
|
if (!(dinfo->gtt_cursor_mem =
|
|
agp_allocate_memory(bridge, dinfo->cursor.size >> 12,
|
|
agp_memtype))) {
|
|
ERR_MSG("cannot allocate cursor memory\n");
|
|
agp_backend_release(bridge);
|
|
cleanup(dinfo);
|
|
return -ENOMEM;
|
|
}
|
|
if (agp_bind_memory(dinfo->gtt_cursor_mem,
|
|
dinfo->cursor.offset)) {
|
|
ERR_MSG("cannot bind cursor memory\n");
|
|
agp_backend_release(bridge);
|
|
cleanup(dinfo);
|
|
return -EBUSY;
|
|
}
|
|
if (dinfo->mobile)
|
|
dinfo->cursor.physical
|
|
= dinfo->gtt_cursor_mem->physical;
|
|
else
|
|
dinfo->cursor.physical = dinfo->aperture.physical
|
|
+ (dinfo->cursor.offset << 12);
|
|
dinfo->cursor.virtual = dinfo->aperture.virtual
|
|
+ (dinfo->cursor.offset << 12);
|
|
}
|
|
if (dinfo->fbmem_gart) {
|
|
if (!(dinfo->gtt_fb_mem =
|
|
agp_allocate_memory(bridge, dinfo->fb.size >> 12,
|
|
AGP_NORMAL_MEMORY))) {
|
|
WRN_MSG("cannot allocate framebuffer memory - use "
|
|
"the stolen one\n");
|
|
dinfo->fbmem_gart = 0;
|
|
}
|
|
if (agp_bind_memory(dinfo->gtt_fb_mem,
|
|
dinfo->fb.offset)) {
|
|
WRN_MSG("cannot bind framebuffer memory - use "
|
|
"the stolen one\n");
|
|
dinfo->fbmem_gart = 0;
|
|
}
|
|
}
|
|
|
|
/* update framebuffer memory parameters */
|
|
if (!dinfo->fbmem_gart)
|
|
dinfo->fb.offset = 0; /* starts at offset 0 */
|
|
dinfo->fb.physical = dinfo->aperture.physical
|
|
+ (dinfo->fb.offset << 12);
|
|
dinfo->fb.virtual = dinfo->aperture.virtual + (dinfo->fb.offset << 12);
|
|
dinfo->fb_start = dinfo->fb.offset << 12;
|
|
|
|
/* release agpgart */
|
|
agp_backend_release(bridge);
|
|
|
|
if (mtrr)
|
|
set_mtrr(dinfo);
|
|
|
|
DBG_MSG("fb: 0x%x(+ 0x%x)/0x%x (0x%p)\n",
|
|
dinfo->fb.physical, dinfo->fb.offset, dinfo->fb.size,
|
|
dinfo->fb.virtual);
|
|
DBG_MSG("MMIO: 0x%x/0x%x (0x%p)\n",
|
|
dinfo->mmio_base_phys, INTEL_REG_SIZE,
|
|
dinfo->mmio_base);
|
|
DBG_MSG("ring buffer: 0x%x/0x%x (0x%p)\n",
|
|
dinfo->ring.physical, dinfo->ring.size,
|
|
dinfo->ring.virtual);
|
|
DBG_MSG("HW cursor: 0x%x/0x%x (0x%p) (offset 0x%x) (phys 0x%x)\n",
|
|
dinfo->cursor.physical, dinfo->cursor.size,
|
|
dinfo->cursor.virtual, dinfo->cursor.offset,
|
|
dinfo->cursor.physical);
|
|
|
|
DBG_MSG("options: vram = %d, accel = %d, hwcursor = %d, fixed = %d, "
|
|
"noinit = %d\n", vram, accel, hwcursor, fixed, noinit);
|
|
DBG_MSG("options: mode = \"%s\"\n", mode ? mode : "");
|
|
|
|
if (probeonly)
|
|
bailout(dinfo);
|
|
|
|
/*
|
|
* Check if the LVDS port or any DVO ports are enabled. If so,
|
|
* don't allow mode switching
|
|
*/
|
|
dvo = intelfbhw_check_non_crt(dinfo);
|
|
if (dvo) {
|
|
dinfo->fixed_mode = 1;
|
|
WRN_MSG("Non-CRT device is enabled ( ");
|
|
i = 0;
|
|
while (dvo) {
|
|
if (dvo & 1) {
|
|
s = intelfbhw_dvo_to_string(1 << i);
|
|
if (s)
|
|
printk("%s ", s);
|
|
}
|
|
dvo >>= 1;
|
|
++i;
|
|
}
|
|
printk("). Disabling mode switching.\n");
|
|
}
|
|
|
|
if (bailearly == 1)
|
|
bailout(dinfo);
|
|
|
|
if (FIXED_MODE(dinfo) &&
|
|
screen_info.orig_video_isVGA != VIDEO_TYPE_VLFB) {
|
|
ERR_MSG("Video mode must be programmed at boot time.\n");
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (bailearly == 2)
|
|
bailout(dinfo);
|
|
|
|
/* Initialise dinfo and related data. */
|
|
/* If an initial mode was programmed at boot time, get its details. */
|
|
if (screen_info.orig_video_isVGA == VIDEO_TYPE_VLFB)
|
|
get_initial_mode(dinfo);
|
|
|
|
if (bailearly == 3)
|
|
bailout(dinfo);
|
|
|
|
if (FIXED_MODE(dinfo)) /* remap fb address */
|
|
update_dinfo(dinfo, &dinfo->initial_var);
|
|
|
|
if (bailearly == 4)
|
|
bailout(dinfo);
|
|
|
|
|
|
if (intelfb_set_fbinfo(dinfo)) {
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (bailearly == 5)
|
|
bailout(dinfo);
|
|
|
|
#ifdef CONFIG_FB_INTEL_I2C
|
|
/* register I2C bus */
|
|
intelfb_create_i2c_busses(dinfo);
|
|
#endif
|
|
|
|
if (bailearly == 6)
|
|
bailout(dinfo);
|
|
|
|
pci_set_drvdata(pdev, dinfo);
|
|
|
|
/* Save the initial register state. */
|
|
i = intelfbhw_read_hw_state(dinfo, &dinfo->save_state,
|
|
bailearly > 6 ? bailearly - 6 : 0);
|
|
if (i != 0) {
|
|
DBG_MSG("intelfbhw_read_hw_state returned %d\n", i);
|
|
bailout(dinfo);
|
|
}
|
|
|
|
intelfbhw_print_hw_state(dinfo, &dinfo->save_state);
|
|
|
|
if (bailearly == 18)
|
|
bailout(dinfo);
|
|
|
|
/* Cursor initialisation */
|
|
if (dinfo->hwcursor) {
|
|
intelfbhw_cursor_init(dinfo);
|
|
intelfbhw_cursor_reset(dinfo);
|
|
}
|
|
|
|
if (bailearly == 19)
|
|
bailout(dinfo);
|
|
|
|
/* 2d acceleration init */
|
|
if (dinfo->accel)
|
|
intelfbhw_2d_start(dinfo);
|
|
|
|
if (bailearly == 20)
|
|
bailout(dinfo);
|
|
|
|
if (noregister)
|
|
bailout(dinfo);
|
|
|
|
if (register_framebuffer(dinfo->info) < 0) {
|
|
ERR_MSG("Cannot register framebuffer.\n");
|
|
cleanup(dinfo);
|
|
return -ENODEV;
|
|
}
|
|
|
|
dinfo->registered = 1;
|
|
dinfo->open = 0;
|
|
|
|
init_waitqueue_head(&dinfo->vsync.wait);
|
|
spin_lock_init(&dinfo->int_lock);
|
|
dinfo->irq_flags = 0;
|
|
dinfo->vsync.pan_display = 0;
|
|
dinfo->vsync.pan_offset = 0;
|
|
|
|
return 0;
|
|
|
|
err_out_pixmap:
|
|
fb_dealloc_cmap(&info->cmap);
|
|
err_out_cmap:
|
|
framebuffer_release(info);
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void __devexit
|
|
intelfb_pci_unregister(struct pci_dev *pdev)
|
|
{
|
|
struct intelfb_info *dinfo = pci_get_drvdata(pdev);
|
|
|
|
DBG_MSG("intelfb_pci_unregister\n");
|
|
|
|
if (!dinfo)
|
|
return;
|
|
|
|
cleanup(dinfo);
|
|
|
|
pci_set_drvdata(pdev, NULL);
|
|
}
|
|
|
|
/***************************************************************
|
|
* helper functions *
|
|
***************************************************************/
|
|
|
|
int __inline__ intelfb_var_to_depth(const struct fb_var_screeninfo *var)
|
|
{
|
|
DBG_MSG("intelfb_var_to_depth: bpp: %d, green.length is %d\n",
|
|
var->bits_per_pixel, var->green.length);
|
|
|
|
switch (var->bits_per_pixel) {
|
|
case 16:
|
|
return (var->green.length == 6) ? 16 : 15;
|
|
case 32:
|
|
return 24;
|
|
default:
|
|
return var->bits_per_pixel;
|
|
}
|
|
}
|
|
|
|
|
|
static __inline__ int var_to_refresh(const struct fb_var_screeninfo *var)
|
|
{
|
|
int xtot = var->xres + var->left_margin + var->right_margin +
|
|
var->hsync_len;
|
|
int ytot = var->yres + var->upper_margin + var->lower_margin +
|
|
var->vsync_len;
|
|
|
|
return (1000000000 / var->pixclock * 1000 + 500) / xtot / ytot;
|
|
}
|
|
|
|
/***************************************************************
|
|
* Various intialisation functions *
|
|
***************************************************************/
|
|
|
|
static void __devinit get_initial_mode(struct intelfb_info *dinfo)
|
|
{
|
|
struct fb_var_screeninfo *var;
|
|
int xtot, ytot;
|
|
|
|
DBG_MSG("get_initial_mode\n");
|
|
|
|
dinfo->initial_vga = 1;
|
|
dinfo->initial_fb_base = screen_info.lfb_base;
|
|
dinfo->initial_video_ram = screen_info.lfb_size * KB(64);
|
|
dinfo->initial_pitch = screen_info.lfb_linelength;
|
|
|
|
var = &dinfo->initial_var;
|
|
memset(var, 0, sizeof(*var));
|
|
var->xres = screen_info.lfb_width;
|
|
var->yres = screen_info.lfb_height;
|
|
var->bits_per_pixel = screen_info.lfb_depth;
|
|
switch (screen_info.lfb_depth) {
|
|
case 15:
|
|
var->bits_per_pixel = 16;
|
|
break;
|
|
case 24:
|
|
var->bits_per_pixel = 32;
|
|
break;
|
|
}
|
|
|
|
DBG_MSG("Initial info: FB is 0x%x/0x%x (%d kByte)\n",
|
|
dinfo->initial_fb_base, dinfo->initial_video_ram,
|
|
BtoKB(dinfo->initial_video_ram));
|
|
|
|
DBG_MSG("Initial info: mode is %dx%d-%d (%d)\n",
|
|
var->xres, var->yres, var->bits_per_pixel,
|
|
dinfo->initial_pitch);
|
|
|
|
/* Dummy timing values (assume 60Hz) */
|
|
var->left_margin = (var->xres / 8) & 0xf8;
|
|
var->right_margin = 32;
|
|
var->upper_margin = 16;
|
|
var->lower_margin = 4;
|
|
var->hsync_len = (var->xres / 8) & 0xf8;
|
|
var->vsync_len = 4;
|
|
|
|
xtot = var->xres + var->left_margin +
|
|
var->right_margin + var->hsync_len;
|
|
ytot = var->yres + var->upper_margin +
|
|
var->lower_margin + var->vsync_len;
|
|
var->pixclock = 10000000 / xtot * 1000 / ytot * 100 / 60;
|
|
|
|
var->height = -1;
|
|
var->width = -1;
|
|
|
|
if (var->bits_per_pixel > 8) {
|
|
var->red.offset = screen_info.red_pos;
|
|
var->red.length = screen_info.red_size;
|
|
var->green.offset = screen_info.green_pos;
|
|
var->green.length = screen_info.green_size;
|
|
var->blue.offset = screen_info.blue_pos;
|
|
var->blue.length = screen_info.blue_size;
|
|
var->transp.offset = screen_info.rsvd_pos;
|
|
var->transp.length = screen_info.rsvd_size;
|
|
} else {
|
|
var->red.length = 8;
|
|
var->green.length = 8;
|
|
var->blue.length = 8;
|
|
}
|
|
}
|
|
|
|
static int __devinit intelfb_init_var(struct intelfb_info *dinfo)
|
|
{
|
|
struct fb_var_screeninfo *var;
|
|
int msrc = 0;
|
|
|
|
DBG_MSG("intelfb_init_var\n");
|
|
|
|
var = &dinfo->info->var;
|
|
if (FIXED_MODE(dinfo)) {
|
|
memcpy(var, &dinfo->initial_var,
|
|
sizeof(struct fb_var_screeninfo));
|
|
msrc = 5;
|
|
} else {
|
|
const u8 *edid_s = fb_firmware_edid(&dinfo->pdev->dev);
|
|
u8 *edid_d = NULL;
|
|
|
|
if (edid_s) {
|
|
edid_d = kmemdup(edid_s, EDID_LENGTH, GFP_KERNEL);
|
|
|
|
if (edid_d) {
|
|
fb_edid_to_monspecs(edid_d,
|
|
&dinfo->info->monspecs);
|
|
kfree(edid_d);
|
|
}
|
|
}
|
|
|
|
if (mode) {
|
|
printk("intelfb: Looking for mode in private "
|
|
"database\n");
|
|
msrc = fb_find_mode(var, dinfo->info, mode,
|
|
dinfo->info->monspecs.modedb,
|
|
dinfo->info->monspecs.modedb_len,
|
|
NULL, 0);
|
|
|
|
if (msrc && msrc > 1) {
|
|
printk("intelfb: No mode in private database, "
|
|
"intelfb: looking for mode in global "
|
|
"database ");
|
|
msrc = fb_find_mode(var, dinfo->info, mode,
|
|
NULL, 0, NULL, 0);
|
|
|
|
if (msrc)
|
|
msrc |= 8;
|
|
}
|
|
|
|
}
|
|
|
|
if (!msrc)
|
|
msrc = fb_find_mode(var, dinfo->info, PREFERRED_MODE,
|
|
NULL, 0, NULL, 0);
|
|
}
|
|
|
|
if (!msrc) {
|
|
ERR_MSG("Cannot find a suitable video mode.\n");
|
|
return 1;
|
|
}
|
|
|
|
INF_MSG("Initial video mode is %dx%d-%d@%d.\n", var->xres, var->yres,
|
|
var->bits_per_pixel, var_to_refresh(var));
|
|
|
|
DBG_MSG("Initial video mode is from %d.\n", msrc);
|
|
|
|
#if ALLOCATE_FOR_PANNING
|
|
/* Allow use of half of the video ram for panning */
|
|
var->xres_virtual = var->xres;
|
|
var->yres_virtual =
|
|
dinfo->fb.size / 2 / (var->bits_per_pixel * var->xres);
|
|
if (var->yres_virtual < var->yres)
|
|
var->yres_virtual = var->yres;
|
|
#else
|
|
var->yres_virtual = var->yres;
|
|
#endif
|
|
|
|
if (dinfo->accel)
|
|
var->accel_flags |= FB_ACCELF_TEXT;
|
|
else
|
|
var->accel_flags &= ~FB_ACCELF_TEXT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __devinit intelfb_set_fbinfo(struct intelfb_info *dinfo)
|
|
{
|
|
struct fb_info *info = dinfo->info;
|
|
|
|
DBG_MSG("intelfb_set_fbinfo\n");
|
|
|
|
info->flags = FBINFO_FLAG_DEFAULT;
|
|
info->fbops = &intel_fb_ops;
|
|
info->pseudo_palette = dinfo->pseudo_palette;
|
|
|
|
info->pixmap.size = 64*1024;
|
|
info->pixmap.buf_align = 8;
|
|
info->pixmap.access_align = 32;
|
|
info->pixmap.flags = FB_PIXMAP_SYSTEM;
|
|
|
|
if (intelfb_init_var(dinfo))
|
|
return 1;
|
|
|
|
info->pixmap.scan_align = 1;
|
|
strcpy(info->fix.id, dinfo->name);
|
|
info->fix.smem_start = dinfo->fb.physical;
|
|
info->fix.smem_len = dinfo->fb.size;
|
|
info->fix.type = FB_TYPE_PACKED_PIXELS;
|
|
info->fix.type_aux = 0;
|
|
info->fix.xpanstep = 8;
|
|
info->fix.ypanstep = 1;
|
|
info->fix.ywrapstep = 0;
|
|
info->fix.mmio_start = dinfo->mmio_base_phys;
|
|
info->fix.mmio_len = INTEL_REG_SIZE;
|
|
info->fix.accel = FB_ACCEL_I830;
|
|
update_dinfo(dinfo, &info->var);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Update dinfo to match the active video mode. */
|
|
static void update_dinfo(struct intelfb_info *dinfo,
|
|
struct fb_var_screeninfo *var)
|
|
{
|
|
DBG_MSG("update_dinfo\n");
|
|
|
|
dinfo->bpp = var->bits_per_pixel;
|
|
dinfo->depth = intelfb_var_to_depth(var);
|
|
dinfo->xres = var->xres;
|
|
dinfo->yres = var->xres;
|
|
dinfo->pixclock = var->pixclock;
|
|
|
|
dinfo->info->fix.visual = dinfo->visual;
|
|
dinfo->info->fix.line_length = dinfo->pitch;
|
|
|
|
switch (dinfo->bpp) {
|
|
case 8:
|
|
dinfo->visual = FB_VISUAL_PSEUDOCOLOR;
|
|
dinfo->pitch = var->xres_virtual;
|
|
break;
|
|
case 16:
|
|
dinfo->visual = FB_VISUAL_TRUECOLOR;
|
|
dinfo->pitch = var->xres_virtual * 2;
|
|
break;
|
|
case 32:
|
|
dinfo->visual = FB_VISUAL_TRUECOLOR;
|
|
dinfo->pitch = var->xres_virtual * 4;
|
|
break;
|
|
}
|
|
|
|
/* Make sure the line length is a aligned correctly. */
|
|
if (IS_I9XX(dinfo))
|
|
dinfo->pitch = ROUND_UP_TO(dinfo->pitch, STRIDE_ALIGNMENT_I9XX);
|
|
else
|
|
dinfo->pitch = ROUND_UP_TO(dinfo->pitch, STRIDE_ALIGNMENT);
|
|
|
|
if (FIXED_MODE(dinfo))
|
|
dinfo->pitch = dinfo->initial_pitch;
|
|
|
|
dinfo->info->screen_base = (char __iomem *)dinfo->fb.virtual;
|
|
dinfo->info->fix.line_length = dinfo->pitch;
|
|
dinfo->info->fix.visual = dinfo->visual;
|
|
}
|
|
|
|
/* fbops functions */
|
|
|
|
/***************************************************************
|
|
* fbdev interface *
|
|
***************************************************************/
|
|
|
|
static int intelfb_open(struct fb_info *info, int user)
|
|
{
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
|
|
if (user)
|
|
dinfo->open++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intelfb_release(struct fb_info *info, int user)
|
|
{
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
|
|
if (user) {
|
|
dinfo->open--;
|
|
msleep(1);
|
|
if (!dinfo->open)
|
|
intelfbhw_disable_irq(dinfo);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intelfb_check_var(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
int change_var = 0;
|
|
struct fb_var_screeninfo v;
|
|
struct intelfb_info *dinfo;
|
|
static int first = 1;
|
|
int i;
|
|
/* Good pitches to allow tiling. Don't care about pitches < 1024. */
|
|
static const int pitches[] = {
|
|
128 * 8,
|
|
128 * 16,
|
|
128 * 32,
|
|
128 * 64,
|
|
0
|
|
};
|
|
|
|
DBG_MSG("intelfb_check_var: accel_flags is %d\n", var->accel_flags);
|
|
|
|
dinfo = GET_DINFO(info);
|
|
|
|
/* update the pitch */
|
|
if (intelfbhw_validate_mode(dinfo, var) != 0)
|
|
return -EINVAL;
|
|
|
|
v = *var;
|
|
|
|
for (i = 0; pitches[i] != 0; i++) {
|
|
if (pitches[i] >= v.xres_virtual) {
|
|
v.xres_virtual = pitches[i];
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Check for a supported bpp. */
|
|
if (v.bits_per_pixel <= 8)
|
|
v.bits_per_pixel = 8;
|
|
else if (v.bits_per_pixel <= 16) {
|
|
if (v.bits_per_pixel == 16)
|
|
v.green.length = 6;
|
|
v.bits_per_pixel = 16;
|
|
} else if (v.bits_per_pixel <= 32)
|
|
v.bits_per_pixel = 32;
|
|
else
|
|
return -EINVAL;
|
|
|
|
change_var = ((info->var.xres != var->xres) ||
|
|
(info->var.yres != var->yres) ||
|
|
(info->var.xres_virtual != var->xres_virtual) ||
|
|
(info->var.yres_virtual != var->yres_virtual) ||
|
|
(info->var.bits_per_pixel != var->bits_per_pixel) ||
|
|
memcmp(&info->var.red, &var->red, sizeof(var->red)) ||
|
|
memcmp(&info->var.green, &var->green,
|
|
sizeof(var->green)) ||
|
|
memcmp(&info->var.blue, &var->blue, sizeof(var->blue)));
|
|
|
|
if (FIXED_MODE(dinfo) &&
|
|
(change_var ||
|
|
var->yres_virtual > dinfo->initial_var.yres_virtual ||
|
|
var->yres_virtual < dinfo->initial_var.yres ||
|
|
var->xoffset || var->nonstd)) {
|
|
if (first) {
|
|
ERR_MSG("Changing the video mode is not supported.\n");
|
|
first = 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (intelfb_var_to_depth(&v)) {
|
|
case 8:
|
|
v.red.offset = v.green.offset = v.blue.offset = 0;
|
|
v.red.length = v.green.length = v.blue.length = 8;
|
|
v.transp.offset = v.transp.length = 0;
|
|
break;
|
|
case 15:
|
|
v.red.offset = 10;
|
|
v.green.offset = 5;
|
|
v.blue.offset = 0;
|
|
v.red.length = v.green.length = v.blue.length = 5;
|
|
v.transp.offset = v.transp.length = 0;
|
|
break;
|
|
case 16:
|
|
v.red.offset = 11;
|
|
v.green.offset = 5;
|
|
v.blue.offset = 0;
|
|
v.red.length = 5;
|
|
v.green.length = 6;
|
|
v.blue.length = 5;
|
|
v.transp.offset = v.transp.length = 0;
|
|
break;
|
|
case 24:
|
|
v.red.offset = 16;
|
|
v.green.offset = 8;
|
|
v.blue.offset = 0;
|
|
v.red.length = v.green.length = v.blue.length = 8;
|
|
v.transp.offset = v.transp.length = 0;
|
|
break;
|
|
case 32:
|
|
v.red.offset = 16;
|
|
v.green.offset = 8;
|
|
v.blue.offset = 0;
|
|
v.red.length = v.green.length = v.blue.length = 8;
|
|
v.transp.offset = 24;
|
|
v.transp.length = 8;
|
|
break;
|
|
}
|
|
|
|
if (v.xoffset < 0)
|
|
v.xoffset = 0;
|
|
if (v.yoffset < 0)
|
|
v.yoffset = 0;
|
|
|
|
if (v.xoffset > v.xres_virtual - v.xres)
|
|
v.xoffset = v.xres_virtual - v.xres;
|
|
if (v.yoffset > v.yres_virtual - v.yres)
|
|
v.yoffset = v.yres_virtual - v.yres;
|
|
|
|
v.red.msb_right = v.green.msb_right = v.blue.msb_right =
|
|
v.transp.msb_right = 0;
|
|
|
|
*var = v;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intelfb_set_par(struct fb_info *info)
|
|
{
|
|
struct intelfb_hwstate *hw;
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
|
|
if (FIXED_MODE(dinfo)) {
|
|
ERR_MSG("Changing the video mode is not supported.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
hw = kmalloc(sizeof(*hw), GFP_ATOMIC);
|
|
if (!hw)
|
|
return -ENOMEM;
|
|
|
|
DBG_MSG("intelfb_set_par (%dx%d-%d)\n", info->var.xres,
|
|
info->var.yres, info->var.bits_per_pixel);
|
|
|
|
intelfb_blank(FB_BLANK_POWERDOWN, info);
|
|
|
|
if (ACCEL(dinfo, info))
|
|
intelfbhw_2d_stop(dinfo);
|
|
|
|
memcpy(hw, &dinfo->save_state, sizeof(*hw));
|
|
if (intelfbhw_mode_to_hw(dinfo, hw, &info->var))
|
|
goto invalid_mode;
|
|
if (intelfbhw_program_mode(dinfo, hw, 0))
|
|
goto invalid_mode;
|
|
|
|
#if REGDUMP > 0
|
|
intelfbhw_read_hw_state(dinfo, hw, 0);
|
|
intelfbhw_print_hw_state(dinfo, hw);
|
|
#endif
|
|
|
|
update_dinfo(dinfo, &info->var);
|
|
|
|
if (ACCEL(dinfo, info))
|
|
intelfbhw_2d_start(dinfo);
|
|
|
|
intelfb_pan_display(&info->var, info);
|
|
|
|
intelfb_blank(FB_BLANK_UNBLANK, info);
|
|
|
|
if (ACCEL(dinfo, info)) {
|
|
info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN |
|
|
FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT |
|
|
FBINFO_HWACCEL_IMAGEBLIT;
|
|
} else
|
|
info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
|
|
|
|
kfree(hw);
|
|
return 0;
|
|
invalid_mode:
|
|
kfree(hw);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int intelfb_setcolreg(unsigned regno, unsigned red, unsigned green,
|
|
unsigned blue, unsigned transp,
|
|
struct fb_info *info)
|
|
{
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
|
|
#if VERBOSE > 0
|
|
DBG_MSG("intelfb_setcolreg: regno %d, depth %d\n", regno, dinfo->depth);
|
|
#endif
|
|
|
|
if (regno > 255)
|
|
return 1;
|
|
|
|
if (dinfo->depth == 8) {
|
|
red >>= 8;
|
|
green >>= 8;
|
|
blue >>= 8;
|
|
|
|
intelfbhw_setcolreg(dinfo, regno, red, green, blue,
|
|
transp);
|
|
}
|
|
|
|
if (regno < 16) {
|
|
switch (dinfo->depth) {
|
|
case 15:
|
|
dinfo->pseudo_palette[regno] = ((red & 0xf800) >> 1) |
|
|
((green & 0xf800) >> 6) |
|
|
((blue & 0xf800) >> 11);
|
|
break;
|
|
case 16:
|
|
dinfo->pseudo_palette[regno] = (red & 0xf800) |
|
|
((green & 0xfc00) >> 5) |
|
|
((blue & 0xf800) >> 11);
|
|
break;
|
|
case 24:
|
|
dinfo->pseudo_palette[regno] = ((red & 0xff00) << 8) |
|
|
(green & 0xff00) |
|
|
((blue & 0xff00) >> 8);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intelfb_blank(int blank, struct fb_info *info)
|
|
{
|
|
intelfbhw_do_blank(blank, info);
|
|
return 0;
|
|
}
|
|
|
|
static int intelfb_pan_display(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
intelfbhw_pan_display(var, info);
|
|
return 0;
|
|
}
|
|
|
|
/* When/if we have our own ioctls. */
|
|
static int intelfb_ioctl(struct fb_info *info, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
int retval = 0;
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
u32 pipe = 0;
|
|
|
|
switch (cmd) {
|
|
case FBIO_WAITFORVSYNC:
|
|
if (get_user(pipe, (__u32 __user *)arg))
|
|
return -EFAULT;
|
|
|
|
retval = intelfbhw_wait_for_vsync(dinfo, pipe);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
static void intelfb_fillrect (struct fb_info *info,
|
|
const struct fb_fillrect *rect)
|
|
{
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
u32 rop, color;
|
|
|
|
#if VERBOSE > 0
|
|
DBG_MSG("intelfb_fillrect\n");
|
|
#endif
|
|
|
|
if (!ACCEL(dinfo, info) || dinfo->depth == 4)
|
|
return cfb_fillrect(info, rect);
|
|
|
|
if (rect->rop == ROP_COPY)
|
|
rop = PAT_ROP_GXCOPY;
|
|
else /* ROP_XOR */
|
|
rop = PAT_ROP_GXXOR;
|
|
|
|
if (dinfo->depth != 8)
|
|
color = dinfo->pseudo_palette[rect->color];
|
|
else
|
|
color = rect->color;
|
|
|
|
intelfbhw_do_fillrect(dinfo, rect->dx, rect->dy,
|
|
rect->width, rect->height, color,
|
|
dinfo->pitch, info->var.bits_per_pixel,
|
|
rop);
|
|
}
|
|
|
|
static void intelfb_copyarea(struct fb_info *info,
|
|
const struct fb_copyarea *region)
|
|
{
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
|
|
#if VERBOSE > 0
|
|
DBG_MSG("intelfb_copyarea\n");
|
|
#endif
|
|
|
|
if (!ACCEL(dinfo, info) || dinfo->depth == 4)
|
|
return cfb_copyarea(info, region);
|
|
|
|
intelfbhw_do_bitblt(dinfo, region->sx, region->sy, region->dx,
|
|
region->dy, region->width, region->height,
|
|
dinfo->pitch, info->var.bits_per_pixel);
|
|
}
|
|
|
|
static void intelfb_imageblit(struct fb_info *info,
|
|
const struct fb_image *image)
|
|
{
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
u32 fgcolor, bgcolor;
|
|
|
|
#if VERBOSE > 0
|
|
DBG_MSG("intelfb_imageblit\n");
|
|
#endif
|
|
|
|
if (!ACCEL(dinfo, info) || dinfo->depth == 4
|
|
|| image->depth != 1)
|
|
return cfb_imageblit(info, image);
|
|
|
|
if (dinfo->depth != 8) {
|
|
fgcolor = dinfo->pseudo_palette[image->fg_color];
|
|
bgcolor = dinfo->pseudo_palette[image->bg_color];
|
|
} else {
|
|
fgcolor = image->fg_color;
|
|
bgcolor = image->bg_color;
|
|
}
|
|
|
|
if (!intelfbhw_do_drawglyph(dinfo, fgcolor, bgcolor, image->width,
|
|
image->height, image->data,
|
|
image->dx, image->dy,
|
|
dinfo->pitch, info->var.bits_per_pixel))
|
|
return cfb_imageblit(info, image);
|
|
}
|
|
|
|
static int intelfb_cursor(struct fb_info *info, struct fb_cursor *cursor)
|
|
{
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
u32 physical;
|
|
#if VERBOSE > 0
|
|
DBG_MSG("intelfb_cursor\n");
|
|
#endif
|
|
|
|
if (!dinfo->hwcursor)
|
|
return -ENODEV;
|
|
|
|
intelfbhw_cursor_hide(dinfo);
|
|
|
|
/* If XFree killed the cursor - restore it */
|
|
physical = (dinfo->mobile || IS_I9XX(dinfo)) ? dinfo->cursor.physical :
|
|
(dinfo->cursor.offset << 12);
|
|
|
|
if (INREG(CURSOR_A_BASEADDR) != physical) {
|
|
u32 fg, bg;
|
|
|
|
DBG_MSG("the cursor was killed - restore it !!\n");
|
|
DBG_MSG("size %d, %d pos %d, %d\n",
|
|
cursor->image.width, cursor->image.height,
|
|
cursor->image.dx, cursor->image.dy);
|
|
|
|
intelfbhw_cursor_init(dinfo);
|
|
intelfbhw_cursor_reset(dinfo);
|
|
intelfbhw_cursor_setpos(dinfo, cursor->image.dx,
|
|
cursor->image.dy);
|
|
|
|
if (dinfo->depth != 8) {
|
|
fg =dinfo->pseudo_palette[cursor->image.fg_color];
|
|
bg =dinfo->pseudo_palette[cursor->image.bg_color];
|
|
} else {
|
|
fg = cursor->image.fg_color;
|
|
bg = cursor->image.bg_color;
|
|
}
|
|
intelfbhw_cursor_setcolor(dinfo, bg, fg);
|
|
intelfbhw_cursor_load(dinfo, cursor->image.width,
|
|
cursor->image.height,
|
|
dinfo->cursor_src);
|
|
|
|
if (cursor->enable)
|
|
intelfbhw_cursor_show(dinfo);
|
|
return 0;
|
|
}
|
|
|
|
if (cursor->set & FB_CUR_SETPOS) {
|
|
u32 dx, dy;
|
|
|
|
dx = cursor->image.dx - info->var.xoffset;
|
|
dy = cursor->image.dy - info->var.yoffset;
|
|
|
|
intelfbhw_cursor_setpos(dinfo, dx, dy);
|
|
}
|
|
|
|
if (cursor->set & FB_CUR_SETSIZE) {
|
|
if (cursor->image.width > 64 || cursor->image.height > 64)
|
|
return -ENXIO;
|
|
|
|
intelfbhw_cursor_reset(dinfo);
|
|
}
|
|
|
|
if (cursor->set & FB_CUR_SETCMAP) {
|
|
u32 fg, bg;
|
|
|
|
if (dinfo->depth != 8) {
|
|
fg = dinfo->pseudo_palette[cursor->image.fg_color];
|
|
bg = dinfo->pseudo_palette[cursor->image.bg_color];
|
|
} else {
|
|
fg = cursor->image.fg_color;
|
|
bg = cursor->image.bg_color;
|
|
}
|
|
|
|
intelfbhw_cursor_setcolor(dinfo, bg, fg);
|
|
}
|
|
|
|
if (cursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETIMAGE)) {
|
|
u32 s_pitch = (ROUND_UP_TO(cursor->image.width, 8) / 8);
|
|
u32 size = s_pitch * cursor->image.height;
|
|
u8 *dat = (u8 *) cursor->image.data;
|
|
u8 *msk = (u8 *) cursor->mask;
|
|
u8 src[64];
|
|
u32 i;
|
|
|
|
if (cursor->image.depth != 1)
|
|
return -ENXIO;
|
|
|
|
switch (cursor->rop) {
|
|
case ROP_XOR:
|
|
for (i = 0; i < size; i++)
|
|
src[i] = dat[i] ^ msk[i];
|
|
break;
|
|
case ROP_COPY:
|
|
default:
|
|
for (i = 0; i < size; i++)
|
|
src[i] = dat[i] & msk[i];
|
|
break;
|
|
}
|
|
|
|
/* save the bitmap to restore it when XFree will
|
|
make the cursor dirty */
|
|
memcpy(dinfo->cursor_src, src, size);
|
|
|
|
intelfbhw_cursor_load(dinfo, cursor->image.width,
|
|
cursor->image.height, src);
|
|
}
|
|
|
|
if (cursor->enable)
|
|
intelfbhw_cursor_show(dinfo);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intelfb_sync(struct fb_info *info)
|
|
{
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
|
|
#if VERBOSE > 0
|
|
DBG_MSG("intelfb_sync\n");
|
|
#endif
|
|
|
|
if (dinfo->ring_lockup)
|
|
return 0;
|
|
|
|
intelfbhw_do_sync(dinfo);
|
|
return 0;
|
|
}
|
|
|