mirror of
https://github.com/torvalds/linux.git
synced 2024-10-30 16:51:45 +00:00
0ba379ec0f
There is a very old quirk for the intel E7502 E7320 and E7525 memory controller hubs that disables usage of msi interrupts on pcie hotplug bridges of those devices, and disables changing the affinity of irqs. Today all we have to do to disable msi on a specific device is to set dev->no_msi, which is much more straightforward than the previous logic. The re-running of this fixup after pci hotplug happens below these devices is totally bogus. All of the state we change is pure software state and we don't change the hardware at all. Which means hotplug on the lower devices doesn't have a chance to change this state. So we can safely remove the special case from the pciehp driver and the pcie portdriver. I suspect the special case was someone's expermental debug code that slipped in. Certainly it isn't mentioned in commit 6fb8880a61510295aece04a542767161f624dffe aka BKrev: 41966101LJ_ogfOU0m2aE6teZfQnuQ where the code first appears. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
689 lines
16 KiB
C
689 lines
16 KiB
C
/*
|
|
* PCI Express Hot Plug Controller Driver
|
|
*
|
|
* Copyright (C) 1995,2001 Compaq Computer Corporation
|
|
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
|
|
* Copyright (C) 2001 IBM Corp.
|
|
* Copyright (C) 2003-2004 Intel Corporation
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
|
|
* NON INFRINGEMENT. See the GNU General Public License for more
|
|
* details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/workqueue.h>
|
|
#include "../pci.h"
|
|
#include "pciehp.h"
|
|
|
|
static void interrupt_event_handler(struct work_struct *work);
|
|
|
|
static int queue_interrupt_event(struct slot *p_slot, u32 event_type)
|
|
{
|
|
struct event_info *info;
|
|
|
|
info = kmalloc(sizeof(*info), GFP_ATOMIC);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
info->event_type = event_type;
|
|
info->p_slot = p_slot;
|
|
INIT_WORK(&info->work, interrupt_event_handler);
|
|
|
|
schedule_work(&info->work);
|
|
|
|
return 0;
|
|
}
|
|
|
|
u8 pciehp_handle_attention_button(struct slot *p_slot)
|
|
{
|
|
u32 event_type;
|
|
struct controller *ctrl = p_slot->ctrl;
|
|
|
|
/* Attention Button Change */
|
|
ctrl_dbg(ctrl, "Attention button interrupt received\n");
|
|
|
|
/*
|
|
* Button pressed - See if need to TAKE ACTION!!!
|
|
*/
|
|
ctrl_info(ctrl, "Button pressed on Slot(%s)\n", slot_name(p_slot));
|
|
event_type = INT_BUTTON_PRESS;
|
|
|
|
queue_interrupt_event(p_slot, event_type);
|
|
|
|
return 0;
|
|
}
|
|
|
|
u8 pciehp_handle_switch_change(struct slot *p_slot)
|
|
{
|
|
u8 getstatus;
|
|
u32 event_type;
|
|
struct controller *ctrl = p_slot->ctrl;
|
|
|
|
/* Switch Change */
|
|
ctrl_dbg(ctrl, "Switch interrupt received\n");
|
|
|
|
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
|
|
if (getstatus) {
|
|
/*
|
|
* Switch opened
|
|
*/
|
|
ctrl_info(ctrl, "Latch open on Slot(%s)\n", slot_name(p_slot));
|
|
event_type = INT_SWITCH_OPEN;
|
|
} else {
|
|
/*
|
|
* Switch closed
|
|
*/
|
|
ctrl_info(ctrl, "Latch close on Slot(%s)\n", slot_name(p_slot));
|
|
event_type = INT_SWITCH_CLOSE;
|
|
}
|
|
|
|
queue_interrupt_event(p_slot, event_type);
|
|
|
|
return 1;
|
|
}
|
|
|
|
u8 pciehp_handle_presence_change(struct slot *p_slot)
|
|
{
|
|
u32 event_type;
|
|
u8 presence_save;
|
|
struct controller *ctrl = p_slot->ctrl;
|
|
|
|
/* Presence Change */
|
|
ctrl_dbg(ctrl, "Presence/Notify input change\n");
|
|
|
|
/* Switch is open, assume a presence change
|
|
* Save the presence state
|
|
*/
|
|
p_slot->hpc_ops->get_adapter_status(p_slot, &presence_save);
|
|
if (presence_save) {
|
|
/*
|
|
* Card Present
|
|
*/
|
|
ctrl_info(ctrl, "Card present on Slot(%s)\n", slot_name(p_slot));
|
|
event_type = INT_PRESENCE_ON;
|
|
} else {
|
|
/*
|
|
* Not Present
|
|
*/
|
|
ctrl_info(ctrl, "Card not present on Slot(%s)\n",
|
|
slot_name(p_slot));
|
|
event_type = INT_PRESENCE_OFF;
|
|
}
|
|
|
|
queue_interrupt_event(p_slot, event_type);
|
|
|
|
return 1;
|
|
}
|
|
|
|
u8 pciehp_handle_power_fault(struct slot *p_slot)
|
|
{
|
|
u32 event_type;
|
|
struct controller *ctrl = p_slot->ctrl;
|
|
|
|
/* power fault */
|
|
ctrl_dbg(ctrl, "Power fault interrupt received\n");
|
|
|
|
if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) {
|
|
/*
|
|
* power fault Cleared
|
|
*/
|
|
ctrl_info(ctrl, "Power fault cleared on Slot(%s)\n",
|
|
slot_name(p_slot));
|
|
event_type = INT_POWER_FAULT_CLEAR;
|
|
} else {
|
|
/*
|
|
* power fault
|
|
*/
|
|
ctrl_info(ctrl, "Power fault on Slot(%s)\n", slot_name(p_slot));
|
|
event_type = INT_POWER_FAULT;
|
|
ctrl_info(ctrl, "Power fault bit %x set\n", 0);
|
|
}
|
|
|
|
queue_interrupt_event(p_slot, event_type);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* The following routines constitute the bulk of the
|
|
hotplug controller logic
|
|
*/
|
|
|
|
static void set_slot_off(struct controller *ctrl, struct slot * pslot)
|
|
{
|
|
/* turn off slot, turn on Amber LED, turn off Green LED if supported*/
|
|
if (POWER_CTRL(ctrl)) {
|
|
if (pslot->hpc_ops->power_off_slot(pslot)) {
|
|
ctrl_err(ctrl,
|
|
"Issue of Slot Power Off command failed\n");
|
|
return;
|
|
}
|
|
/*
|
|
* After turning power off, we must wait for at least 1 second
|
|
* before taking any action that relies on power having been
|
|
* removed from the slot/adapter.
|
|
*/
|
|
msleep(1000);
|
|
}
|
|
|
|
if (PWR_LED(ctrl))
|
|
pslot->hpc_ops->green_led_off(pslot);
|
|
|
|
if (ATTN_LED(ctrl)) {
|
|
if (pslot->hpc_ops->set_attention_status(pslot, 1)) {
|
|
ctrl_err(ctrl,
|
|
"Issue of Set Attention Led command failed\n");
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* board_added - Called after a board has been added to the system.
|
|
* @p_slot: &slot where board is added
|
|
*
|
|
* Turns power on for the board.
|
|
* Configures board.
|
|
*/
|
|
static int board_added(struct slot *p_slot)
|
|
{
|
|
int retval = 0;
|
|
struct controller *ctrl = p_slot->ctrl;
|
|
struct pci_bus *parent = ctrl->pci_dev->subordinate;
|
|
|
|
ctrl_dbg(ctrl, "%s: slot device, slot offset, hp slot = %d, %d, %d\n",
|
|
__func__, p_slot->device, ctrl->slot_device_offset,
|
|
p_slot->hp_slot);
|
|
|
|
if (POWER_CTRL(ctrl)) {
|
|
/* Power on slot */
|
|
retval = p_slot->hpc_ops->power_on_slot(p_slot);
|
|
if (retval)
|
|
return retval;
|
|
}
|
|
|
|
if (PWR_LED(ctrl))
|
|
p_slot->hpc_ops->green_led_blink(p_slot);
|
|
|
|
/* Check link training status */
|
|
retval = p_slot->hpc_ops->check_lnk_status(ctrl);
|
|
if (retval) {
|
|
ctrl_err(ctrl, "Failed to check link status\n");
|
|
set_slot_off(ctrl, p_slot);
|
|
return retval;
|
|
}
|
|
|
|
/* Check for a power fault */
|
|
if (p_slot->hpc_ops->query_power_fault(p_slot)) {
|
|
ctrl_dbg(ctrl, "Power fault detected\n");
|
|
retval = POWER_FAILURE;
|
|
goto err_exit;
|
|
}
|
|
|
|
retval = pciehp_configure_device(p_slot);
|
|
if (retval) {
|
|
ctrl_err(ctrl, "Cannot add device at %04x:%02x:%02x\n",
|
|
pci_domain_nr(parent), p_slot->bus, p_slot->device);
|
|
goto err_exit;
|
|
}
|
|
|
|
if (PWR_LED(ctrl))
|
|
p_slot->hpc_ops->green_led_on(p_slot);
|
|
|
|
return 0;
|
|
|
|
err_exit:
|
|
set_slot_off(ctrl, p_slot);
|
|
return retval;
|
|
}
|
|
|
|
/**
|
|
* remove_board - Turns off slot and LEDs
|
|
* @p_slot: slot where board is being removed
|
|
*/
|
|
static int remove_board(struct slot *p_slot)
|
|
{
|
|
int retval = 0;
|
|
struct controller *ctrl = p_slot->ctrl;
|
|
|
|
retval = pciehp_unconfigure_device(p_slot);
|
|
if (retval)
|
|
return retval;
|
|
|
|
ctrl_dbg(ctrl, "%s: hp_slot = %d\n", __func__, p_slot->hp_slot);
|
|
|
|
if (POWER_CTRL(ctrl)) {
|
|
/* power off slot */
|
|
retval = p_slot->hpc_ops->power_off_slot(p_slot);
|
|
if (retval) {
|
|
ctrl_err(ctrl,
|
|
"Issue of Slot Disable command failed\n");
|
|
return retval;
|
|
}
|
|
/*
|
|
* After turning power off, we must wait for at least 1 second
|
|
* before taking any action that relies on power having been
|
|
* removed from the slot/adapter.
|
|
*/
|
|
msleep(1000);
|
|
}
|
|
|
|
if (PWR_LED(ctrl))
|
|
/* turn off Green LED */
|
|
p_slot->hpc_ops->green_led_off(p_slot);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct power_work_info {
|
|
struct slot *p_slot;
|
|
struct work_struct work;
|
|
};
|
|
|
|
/**
|
|
* pciehp_power_thread - handle pushbutton events
|
|
* @work: &struct work_struct describing work to be done
|
|
*
|
|
* Scheduled procedure to handle blocking stuff for the pushbuttons.
|
|
* Handles all pending events and exits.
|
|
*/
|
|
static void pciehp_power_thread(struct work_struct *work)
|
|
{
|
|
struct power_work_info *info =
|
|
container_of(work, struct power_work_info, work);
|
|
struct slot *p_slot = info->p_slot;
|
|
|
|
mutex_lock(&p_slot->lock);
|
|
switch (p_slot->state) {
|
|
case POWEROFF_STATE:
|
|
mutex_unlock(&p_slot->lock);
|
|
ctrl_dbg(p_slot->ctrl,
|
|
"Disabling domain:bus:device=%04x:%02x:%02x\n",
|
|
pci_domain_nr(p_slot->ctrl->pci_dev->subordinate),
|
|
p_slot->bus, p_slot->device);
|
|
pciehp_disable_slot(p_slot);
|
|
mutex_lock(&p_slot->lock);
|
|
p_slot->state = STATIC_STATE;
|
|
break;
|
|
case POWERON_STATE:
|
|
mutex_unlock(&p_slot->lock);
|
|
if (pciehp_enable_slot(p_slot) &&
|
|
PWR_LED(p_slot->ctrl))
|
|
p_slot->hpc_ops->green_led_off(p_slot);
|
|
mutex_lock(&p_slot->lock);
|
|
p_slot->state = STATIC_STATE;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
mutex_unlock(&p_slot->lock);
|
|
|
|
kfree(info);
|
|
}
|
|
|
|
void pciehp_queue_pushbutton_work(struct work_struct *work)
|
|
{
|
|
struct slot *p_slot = container_of(work, struct slot, work.work);
|
|
struct power_work_info *info;
|
|
|
|
info = kmalloc(sizeof(*info), GFP_KERNEL);
|
|
if (!info) {
|
|
ctrl_err(p_slot->ctrl, "%s: Cannot allocate memory\n",
|
|
__func__);
|
|
return;
|
|
}
|
|
info->p_slot = p_slot;
|
|
INIT_WORK(&info->work, pciehp_power_thread);
|
|
|
|
mutex_lock(&p_slot->lock);
|
|
switch (p_slot->state) {
|
|
case BLINKINGOFF_STATE:
|
|
p_slot->state = POWEROFF_STATE;
|
|
break;
|
|
case BLINKINGON_STATE:
|
|
p_slot->state = POWERON_STATE;
|
|
break;
|
|
default:
|
|
goto out;
|
|
}
|
|
queue_work(pciehp_wq, &info->work);
|
|
out:
|
|
mutex_unlock(&p_slot->lock);
|
|
}
|
|
|
|
static int update_slot_info(struct slot *slot)
|
|
{
|
|
struct hotplug_slot_info *info;
|
|
int result;
|
|
|
|
info = kmalloc(sizeof(*info), GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
slot->hpc_ops->get_power_status(slot, &(info->power_status));
|
|
slot->hpc_ops->get_attention_status(slot, &(info->attention_status));
|
|
slot->hpc_ops->get_latch_status(slot, &(info->latch_status));
|
|
slot->hpc_ops->get_adapter_status(slot, &(info->adapter_status));
|
|
|
|
result = pci_hp_change_slot_info(slot->hotplug_slot, info);
|
|
kfree (info);
|
|
return result;
|
|
}
|
|
|
|
/*
|
|
* Note: This function must be called with slot->lock held
|
|
*/
|
|
static void handle_button_press_event(struct slot *p_slot)
|
|
{
|
|
struct controller *ctrl = p_slot->ctrl;
|
|
u8 getstatus;
|
|
|
|
switch (p_slot->state) {
|
|
case STATIC_STATE:
|
|
p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
|
|
if (getstatus) {
|
|
p_slot->state = BLINKINGOFF_STATE;
|
|
ctrl_info(ctrl,
|
|
"PCI slot #%s - powering off due to button "
|
|
"press.\n", slot_name(p_slot));
|
|
} else {
|
|
p_slot->state = BLINKINGON_STATE;
|
|
ctrl_info(ctrl,
|
|
"PCI slot #%s - powering on due to button "
|
|
"press.\n", slot_name(p_slot));
|
|
}
|
|
/* blink green LED and turn off amber */
|
|
if (PWR_LED(ctrl))
|
|
p_slot->hpc_ops->green_led_blink(p_slot);
|
|
if (ATTN_LED(ctrl))
|
|
p_slot->hpc_ops->set_attention_status(p_slot, 0);
|
|
|
|
schedule_delayed_work(&p_slot->work, 5*HZ);
|
|
break;
|
|
case BLINKINGOFF_STATE:
|
|
case BLINKINGON_STATE:
|
|
/*
|
|
* Cancel if we are still blinking; this means that we
|
|
* press the attention again before the 5 sec. limit
|
|
* expires to cancel hot-add or hot-remove
|
|
*/
|
|
ctrl_info(ctrl, "Button cancel on Slot(%s)\n", slot_name(p_slot));
|
|
cancel_delayed_work(&p_slot->work);
|
|
if (p_slot->state == BLINKINGOFF_STATE) {
|
|
if (PWR_LED(ctrl))
|
|
p_slot->hpc_ops->green_led_on(p_slot);
|
|
} else {
|
|
if (PWR_LED(ctrl))
|
|
p_slot->hpc_ops->green_led_off(p_slot);
|
|
}
|
|
if (ATTN_LED(ctrl))
|
|
p_slot->hpc_ops->set_attention_status(p_slot, 0);
|
|
ctrl_info(ctrl, "PCI slot #%s - action canceled "
|
|
"due to button press\n", slot_name(p_slot));
|
|
p_slot->state = STATIC_STATE;
|
|
break;
|
|
case POWEROFF_STATE:
|
|
case POWERON_STATE:
|
|
/*
|
|
* Ignore if the slot is on power-on or power-off state;
|
|
* this means that the previous attention button action
|
|
* to hot-add or hot-remove is undergoing
|
|
*/
|
|
ctrl_info(ctrl, "Button ignore on Slot(%s)\n", slot_name(p_slot));
|
|
update_slot_info(p_slot);
|
|
break;
|
|
default:
|
|
ctrl_warn(ctrl, "Not a valid state\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Note: This function must be called with slot->lock held
|
|
*/
|
|
static void handle_surprise_event(struct slot *p_slot)
|
|
{
|
|
u8 getstatus;
|
|
struct power_work_info *info;
|
|
|
|
info = kmalloc(sizeof(*info), GFP_KERNEL);
|
|
if (!info) {
|
|
ctrl_err(p_slot->ctrl, "%s: Cannot allocate memory\n",
|
|
__func__);
|
|
return;
|
|
}
|
|
info->p_slot = p_slot;
|
|
INIT_WORK(&info->work, pciehp_power_thread);
|
|
|
|
p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
|
|
if (!getstatus)
|
|
p_slot->state = POWEROFF_STATE;
|
|
else
|
|
p_slot->state = POWERON_STATE;
|
|
|
|
queue_work(pciehp_wq, &info->work);
|
|
}
|
|
|
|
static void interrupt_event_handler(struct work_struct *work)
|
|
{
|
|
struct event_info *info = container_of(work, struct event_info, work);
|
|
struct slot *p_slot = info->p_slot;
|
|
struct controller *ctrl = p_slot->ctrl;
|
|
|
|
mutex_lock(&p_slot->lock);
|
|
switch (info->event_type) {
|
|
case INT_BUTTON_PRESS:
|
|
handle_button_press_event(p_slot);
|
|
break;
|
|
case INT_POWER_FAULT:
|
|
if (!POWER_CTRL(ctrl))
|
|
break;
|
|
if (ATTN_LED(ctrl))
|
|
p_slot->hpc_ops->set_attention_status(p_slot, 1);
|
|
if (PWR_LED(ctrl))
|
|
p_slot->hpc_ops->green_led_off(p_slot);
|
|
break;
|
|
case INT_PRESENCE_ON:
|
|
case INT_PRESENCE_OFF:
|
|
if (!HP_SUPR_RM(ctrl))
|
|
break;
|
|
ctrl_dbg(ctrl, "Surprise Removal\n");
|
|
update_slot_info(p_slot);
|
|
handle_surprise_event(p_slot);
|
|
break;
|
|
default:
|
|
update_slot_info(p_slot);
|
|
break;
|
|
}
|
|
mutex_unlock(&p_slot->lock);
|
|
|
|
kfree(info);
|
|
}
|
|
|
|
int pciehp_enable_slot(struct slot *p_slot)
|
|
{
|
|
u8 getstatus = 0;
|
|
int rc;
|
|
struct controller *ctrl = p_slot->ctrl;
|
|
|
|
/* Check to see if (latch closed, card present, power off) */
|
|
mutex_lock(&p_slot->ctrl->crit_sect);
|
|
|
|
rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
|
|
if (rc || !getstatus) {
|
|
ctrl_info(ctrl, "No adapter on slot(%s)\n", slot_name(p_slot));
|
|
mutex_unlock(&p_slot->ctrl->crit_sect);
|
|
return -ENODEV;
|
|
}
|
|
if (MRL_SENS(p_slot->ctrl)) {
|
|
rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
|
|
if (rc || getstatus) {
|
|
ctrl_info(ctrl, "Latch open on slot(%s)\n",
|
|
slot_name(p_slot));
|
|
mutex_unlock(&p_slot->ctrl->crit_sect);
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
if (POWER_CTRL(p_slot->ctrl)) {
|
|
rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
|
|
if (rc || getstatus) {
|
|
ctrl_info(ctrl, "Already enabled on slot(%s)\n",
|
|
slot_name(p_slot));
|
|
mutex_unlock(&p_slot->ctrl->crit_sect);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
|
|
|
|
rc = board_added(p_slot);
|
|
if (rc) {
|
|
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
|
|
}
|
|
|
|
update_slot_info(p_slot);
|
|
|
|
mutex_unlock(&p_slot->ctrl->crit_sect);
|
|
return rc;
|
|
}
|
|
|
|
|
|
int pciehp_disable_slot(struct slot *p_slot)
|
|
{
|
|
u8 getstatus = 0;
|
|
int ret = 0;
|
|
struct controller *ctrl = p_slot->ctrl;
|
|
|
|
if (!p_slot->ctrl)
|
|
return 1;
|
|
|
|
/* Check to see if (latch closed, card present, power on) */
|
|
mutex_lock(&p_slot->ctrl->crit_sect);
|
|
|
|
if (!HP_SUPR_RM(p_slot->ctrl)) {
|
|
ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
|
|
if (ret || !getstatus) {
|
|
ctrl_info(ctrl, "No adapter on slot(%s)\n",
|
|
slot_name(p_slot));
|
|
mutex_unlock(&p_slot->ctrl->crit_sect);
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
if (MRL_SENS(p_slot->ctrl)) {
|
|
ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
|
|
if (ret || getstatus) {
|
|
ctrl_info(ctrl, "Latch open on slot(%s)\n",
|
|
slot_name(p_slot));
|
|
mutex_unlock(&p_slot->ctrl->crit_sect);
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
if (POWER_CTRL(p_slot->ctrl)) {
|
|
ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
|
|
if (ret || !getstatus) {
|
|
ctrl_info(ctrl, "Already disabled on slot(%s)\n",
|
|
slot_name(p_slot));
|
|
mutex_unlock(&p_slot->ctrl->crit_sect);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
ret = remove_board(p_slot);
|
|
update_slot_info(p_slot);
|
|
|
|
mutex_unlock(&p_slot->ctrl->crit_sect);
|
|
return ret;
|
|
}
|
|
|
|
int pciehp_sysfs_enable_slot(struct slot *p_slot)
|
|
{
|
|
int retval = -ENODEV;
|
|
struct controller *ctrl = p_slot->ctrl;
|
|
|
|
mutex_lock(&p_slot->lock);
|
|
switch (p_slot->state) {
|
|
case BLINKINGON_STATE:
|
|
cancel_delayed_work(&p_slot->work);
|
|
case STATIC_STATE:
|
|
p_slot->state = POWERON_STATE;
|
|
mutex_unlock(&p_slot->lock);
|
|
retval = pciehp_enable_slot(p_slot);
|
|
mutex_lock(&p_slot->lock);
|
|
p_slot->state = STATIC_STATE;
|
|
break;
|
|
case POWERON_STATE:
|
|
ctrl_info(ctrl, "Slot %s is already in powering on state\n",
|
|
slot_name(p_slot));
|
|
break;
|
|
case BLINKINGOFF_STATE:
|
|
case POWEROFF_STATE:
|
|
ctrl_info(ctrl, "Already enabled on slot %s\n",
|
|
slot_name(p_slot));
|
|
break;
|
|
default:
|
|
ctrl_err(ctrl, "Not a valid state on slot %s\n",
|
|
slot_name(p_slot));
|
|
break;
|
|
}
|
|
mutex_unlock(&p_slot->lock);
|
|
|
|
return retval;
|
|
}
|
|
|
|
int pciehp_sysfs_disable_slot(struct slot *p_slot)
|
|
{
|
|
int retval = -ENODEV;
|
|
struct controller *ctrl = p_slot->ctrl;
|
|
|
|
mutex_lock(&p_slot->lock);
|
|
switch (p_slot->state) {
|
|
case BLINKINGOFF_STATE:
|
|
cancel_delayed_work(&p_slot->work);
|
|
case STATIC_STATE:
|
|
p_slot->state = POWEROFF_STATE;
|
|
mutex_unlock(&p_slot->lock);
|
|
retval = pciehp_disable_slot(p_slot);
|
|
mutex_lock(&p_slot->lock);
|
|
p_slot->state = STATIC_STATE;
|
|
break;
|
|
case POWEROFF_STATE:
|
|
ctrl_info(ctrl, "Slot %s is already in powering off state\n",
|
|
slot_name(p_slot));
|
|
break;
|
|
case BLINKINGON_STATE:
|
|
case POWERON_STATE:
|
|
ctrl_info(ctrl, "Already disabled on slot %s\n",
|
|
slot_name(p_slot));
|
|
break;
|
|
default:
|
|
ctrl_err(ctrl, "Not a valid state on slot %s\n",
|
|
slot_name(p_slot));
|
|
break;
|
|
}
|
|
mutex_unlock(&p_slot->lock);
|
|
|
|
return retval;
|
|
}
|